BUREAU OF INDIAN STANDARDS PRODUCTION AND GENERAL ENGINEERING य पक पररच लन म मस द
|
|
- Sophie Hamilton
- 6 years ago
- Views:
Transcription
1 BUREAU OF INDIAN STANDARDS PRODUCTION AND GENERAL ENGINEERING य पक पररच लन म मस द DRAFTS IN WIDE CIRCULATION रल ख र षण स ञ पन/DOCUMENT DESPATCH ADVICE स द भ /Ref. तकन क सम तत/TECHNICAL COMMITTEE: प ज ड 37/(10521, 10522, 10523, 10525, 10528, 10530, 10531, 10532, 10533)डब य PGD 37/(10521, 10522, 10523, 10525, 10528, 10530, 10531, 10532, 10533) W ददन क/Date स य इ ज तनयर एव ब धक नक ववषय सम तत प ज ड 37 / General Engineering and Fasteners Standards Sectional Committee, PGD 37 सभ सद य क /To all Members of : 1. क) उ प दन एव स म य इ ज ननयर वव ग य पररषद / Production & General Engineering Division Council ख) स म य इ ज ननयर एव ब धक म नक ववषय सममन प ज ड 37 / General Engineering and Fasteners Standards Sectional Committee, PGD च रखन व ल अ य सद य/Other Interested Members Dear Sir(s), क पय स म य इ ज ननयर एव ब धक म नक ववषय सममन प ज ड 37 व र तय र ककए गए तन नमलखखत स ल न रलख र त कर /Please find enclosed the following document prepared by the General Engineering and Fasteners Standards Sectional Committee, PGD 37 Sl. No रल ख स य /DOC NO. श षक /TITLE 1. प ज ड /PGD 37(10521)W IS 1367(Pt 5): XXXX/ ISO 898-5:2012 प ज ड /PGD 37(10522)W IS 1367(Pt 6): XXXX /ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread 2. Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch thread
2 प ज ड /PGD 37(10523)W IS 1367(Pt 14/Sec 1): XXXX /ISO : 2009 प ज ड /PGD 37(10525)W IS 1367(Pt 14/Sec 2): XXXX ISO : 2009 प ज ड /PGD 37(10528)W IS 1367(Pt 14/Sec 3): XXXX ISO : 2009 प ज ड /PGD 37(10530)W IS 1368: XXXX ISO 4573: 2011 प ज ड /PGD 37(10531)W IS 3458: XXXX ISO 1119: 2011 प ज ड /PGD 37(10532)W IS 4206: XXXX ISO 888 : 2012 प ज ड /PGD 37(10533)W IS (Part 1) : XXXX ISO : 2013 Mechanical properties of corrosion resistant stainless steel fasteners Part 14 Section 1: Bolts, screws and studs Mechanical properties of corrosion resistant stainless steel fasteners Part 14 Section 2: Nuts Mechanical properties of corrosion resistant stainless steel fasteners Part 14 Section 3: Set screws and similar fasteners not under tensile stress Fasteners Ends of parts with external ISO metric thread Geometrical product specifications (GPS) Series of conical tapers and taper angles Fasteners Bolts, screws and studs Nominal lengths and thread lengths ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data क पय इस रलख क अवल कन कर और अपन स ततय यह बत त ह ए भज कक अ तत: यदद य नक क प रक म त ह ज ए त इन पर अ ल करन आपक यवस य अथव क र ब र य कद न ईय आ सकत ह /Kindly examine the draft amendment to standards and forward your views stating any difficulties which you are likely to experience in your business or profession, if these are finally adopted as National Standards. स ततय भजन क अ तत ततचथ/Last date for comments: यदद आपक क ई स तत ह त क पय ददय गय र प अ य ह त षर क उपर त पत पर भज /Comments, if any, may please be made in the format as given in overleaf and mailed to the undersigned at the above address. यदद आपक क ई स ततय र त नह ह त ह य कवल स प दक य स ततय र त ह त ह त ह उपर त र त व क भ रत य नक क अ तम त प स अचधरहण करन क आपक सह तत न लन क अन तत द पर त यदद ह तकन क स ततय र त ह त ह तब य त व ववषय सम तत क
3 अ यष स पर श प त भ रत य नक क अ तम त प प ररत कर अचधरदहत ककए ज ए ग अथव उनक इ छ न स र आव यक क यशव ह हत वव य सम तत क वव र थश भज ज ए ग/In case, no comments are received or comments received are of editorial nature, you will kindly permit us to presume your approval for the above documents as finalised for adoption as Indian Standards. However, in case of comments of technical in nature are received then it may be finalized either in consultation with the Chairman, Sectional Committee or referred to the Sectional Committee. ध यव द/Thanking you, ल न/Encls.: उपर त/As above. भवद य/Yours faithfully, (र जप ल/RAJPAL) र ख / Head (प ज ड /PGD) pgd@bis.org.in
4 FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS (Please use A4 size sheet of paper only and type within fields indicated. Comments on each clauses/sub-clauses/table/fig. etc.. are started on a fresh box. Information in Column 4 should include reasons for the comments and suggestions for modified wording of the clauses when the existing text is found not acceptable. Adherence to this format facilitates Secretariat s work) Sl. No रल ख स य /DOC NO. श षक /TITLE 10. प ज ड /PGD 37(10521)W IS 1367(Pt 5): XXXX/ ISO 898-5:2012 प ज ड /PGD 37(10522)W IS 1367(Pt 6): XXXX /ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread प ज ड /PGD 37(10523)W IS 1367(Pt 14/Sec 1): XXXX /ISO : 2009 प ज ड /PGD 37(10525)W IS 1367(Pt 14/Sec 2): XXXX ISO : 2009 प ज ड /PGD 37(10528)W IS 1367(Pt 14/Sec 3): XXXX ISO : 2009 प ज ड /PGD 37(10530)W IS 1368: XXXX ISO 4573: 2011 प ज ड /PGD 37(10531)W IS 3458: XXXX ISO 1119: 2011 प ज ड /PGD 37(10532)W IS 4206: XXXX ISO 888 : 2012 प ज ड /PGD 37(10533)W IS (Part 1) : XXXX ISO : 2013 Mechanical properties of corrosion resistant stainless steel fasteners Part 14 Section 1: Bolts, screws and studs Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch thread Mechanical properties of corrosion resistant stainless steel fasteners Part 14 Section 2: Nuts Mechanical properties of corrosion resistant stainless steel fasteners Part 14 Section 3: Set screws and similar fasteners not under tensile stress Fasteners Ends of parts with external ISO metric thread Geometrical product specifications (GPS) Series of conical tapers and taper angles Fasteners Bolts, screws and studs Nominal lengths and thread lengths ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data
5 LAST DATE OF COMMENTS: NAME OF THE COMMENTATOR/ORGANIZATION: रल ख स य /DOC NO. Sl. Clause/Subclause/ No. para/table/fig. No. commented For Bureau s Use श षक /TITLE Commentator/ Organization/ Abbreviation Type of Comments (General/Editorial/ Technical) Justification Proposed change
6 For Comments only Doc. No.: PGD 37(10521) W IS 1367(Pt 5): XXXX ISO 898-5:2012 July 2016 Draft Indian Standard Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO : 2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of IS 8536:1987 Fasteners Bolts, screws, studs and nuts Symbols and designation of ISO 225:1983
7 dimensions dimensions (first revision) ISO 965-1, ISO general-purpose metric screw threads Tolerances Part 1: Principles and basic data IS 14962(Pt 1): 2001 ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data ISO 9651:1998 ISO 965-3, ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screen threads IS 14962(Pt 3): 2001 ISO general purpose metric screw threads Tolerances Part 3: Deviation for constructional screw threads ISO 9653:1998 ISO , Fasteners Surface discontinuities Part 1: Bolts, screws and studs for general requirements IS 1367 ( Part 9 / Sec 1) : 1993 Technical supply conditions for ISO 61571:1988 threaded steel fasteners Part 9 Surface discontinuities Section 1 Bolts screws and studs for general applications ISO , Metallic materials Brinell hardness test Part 1: Test method IS 1500 (Part 1) : 2013 Metallic materials Brinell hardness ISO : ISO , Metallic materials Vickers hardness test Part 1: Test method IS 1501 (Part 1) : 2013 Metallic materials Vickers hardness ISO : ISO , Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) IS 1586 (Part 1) : 2012 Metallic materials Rockwell hardness ISO : (scales A, B, C, D, E, F, G, H, K, N, T) ISO 16426, Fasteners Quality assurance system Doc. No.: PGD 37(1601) Fasteners Quality assurance system ISO : 2002 For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
8 For Comments only Doc. No.: PGD 37(10522) W IS 1367(Pt 6): XXXX ISO 898-2:2012 July 2016 Draft Indian Standard Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch thread ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO : 2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch thread issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO , Fasteners Surface discontinuities Part 2: Nuts IS 1367 ( Part 10) : 2002 Technical Supply Conditions for Threaded Steel Fasteners - Part ISO :
9 10 Surface Discontinuities Nuts (Third Revision) 1995 ISO , Metallic materials Brinell hardness test Part 1: Test method IS 1500 (Part 1) : 2013 Metallic materials Brinell hardness ISO : ISO , Metallic materials Vickers hardness test Part 1: Test method IS 1501 (Part 1) : 2013 Metallic materials Vickers hardness ISO : ISO , Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) IS 1586 (Part 1) : 2012 Metallic materials Rockwell hardness ISO : (scales A, B, C, D, E, F, G, H, K, N, T) ISO , Metallic materials Tensile testing Part 1: Method of test at room temperature IS 1608 : METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE ( Third Revision) ISO 6892 : 1998 ISO , Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the force-measuring system IS 1828 (Part 1) : 2015 Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the forcemeasuring system ISO : 2004 ISO 16426, Fasteners Quality assurance system Doc. No.: PGD 37(1601) Fasteners Quality assurance system ISO : 2002 For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
10 For Comments only Doc. No.: PGD 37(10523) W IS 1367(Pt 14/Sec 1): XXXX ISO : 2009 July 2016 Draft Indian Standard Mechanical properties of corrosion resistant stainless steel fasteners Part 1 Section 1: Bolts, screws and studs ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO : 2009 Mechanical properties of corrosion resistant stainless steel fasteners Part 1: Bolts, screws and studs issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw threads IS 4218 (Part 1):2001 ISO General purpose metric screw threads: Part 1 Basic profile (second revision) ISO 681:1998 ISO 261, ISO general purpose metric IS 4218(Part 2): 2001 ISO General purpose metric screw threads: Part 2 General plan
11 screw threads General plan (second revision) ISO 261 : 1998 ISO 262, ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts IS 4218(Part 4): 2001 ISO General purpose metric screw threads: Part 4 Selected sizes for screws, bolts and nuts (second revision) ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes Coarse thread and fine pitch thread IS 1367(Part 3):2002 Technical supply conditions for threaded steel fasteners: Part 3 Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs (fourth revision) ISO , Metallic materials Brinell hardness test Part 1: Test method IS 1500 (Part 1) : 2013 Metallic materials Brinell hardness ISO : ISO , Metallic materials Vickers hardness test Part 1: Test method IS 1501 (Part 1) : 2013 Metallic materials Vickers hardness ISO : ISO , Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) IS 1586 (Part 1) : 2012 Metallic materials Rockwell hardness ISO : (scales A, B, C, D, E, F, G, H, K, N, T) ISO , Metallic materials Tensile testing Part 1: Method of test at room temperature IS 1608 : METALLIC MATERIALS - TENSILE TESTING AT AMBIENT TEMPERATURE ( Third Revision) ISO 6892 : 1998 ISO 16426, Fasteners Quality assurance system Doc. No.: PGD 37(1601) Fasteners Quality assurance system ISO : 2002 ISO 262 : 1998 ISO : 1999 The technical committee has reviewed the provisions of the following International Standards referred in this adopted standard and has decided that they are acceptable for use in conjunction with this standard: International Standard Title ISO Determination of resistance to intergranular corrosion of stainless steels Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) ISO Determination of resistance to intergranular corrosion of stainless steels Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels Corrosion test in media containing sulfuric acid
12 ISO Passivation of corrosion-resistant stainless-steel fasteners For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
13 For Comments only Doc. No.: PGD 37(10528) W IS 1367(Pt 14/Sec 3): XXXX ISO : 2009 July 2016 Draft Indian Standard Mechanical properties of corrosion resistant stainless steel fasteners Part 14 Section 3: Set screws and similar fasteners not under tensile stress ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO : 2009 Mechanical properties of corrosion resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw threads IS 4218 (Part 1):2001 ISO General purpose metric screw threads: Part 1 Basic profile (second revision) ISO 681:1998 ISO 261, ISO general purpose IS 4218(Part 2): 2001 ISO
14 metric screw threads General plan General purpose metric screw threads: Part 2 General plan (second revision) ISO 261 : 1998 ISO 262, ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts IS 4218(Part 4): 2001 ISO General purpose metric screw threads: Part 4 Selected sizes for screws, bolts and nuts (second revision) ISO 262 : 1998 ISO 898-5, Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners not under tensile stresses Doc. No.: PGD 37( ) IS 1367(Pt 5): XXXX Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners not under tensile stresses ISO : 2012 ISO , Metallic materials Brinell hardness test Part 1: Test method IS 1500 (Part 1) : 2013 Metallic materials Brinell hardness ISO : ISO , Metallic materials Vickers hardness test Part 1: Test method IS 1501 (Part 1) : 2013 Metallic materials Vickers hardness ISO : ISO , Metallic materials Rockwell hardness test Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) IS 1586 (Part 1) : 2012 Metallic materials Rockwell hardness ISO : (scales A, B, C, D, E, F, G, H, K, N, T) ISO 16426, Fasteners Quality assurance system Doc. No.: PGD 37(1601) Fasteners Quality assurance system ISO : 2002 The technical committee has reviewed the provisions of the following International Standards referred in this adopted standard and has decided that they are acceptable for use in conjunction with this standard: International Standard ISO Title Determination of resistance to intergranular corrosion of stainless steels Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels Corrosion test in nitric acid medium
15 by measurement of loss in mass (Huey test) ISO Determination of resistance to intergranular corrosion of stainless steels Part 2: Ferritic, austenitic and ferriticaustenitic (duplex) stainless steels Corrosion test in media containing sulfuric acid ISO Passivation of corrosion-resistant stainless-steel fasteners For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
16 For Comments only Doc. No.: PGD 37(10530) W IS 1368: XXXX ISO 4573: 2011 July 2016 Draft Indian Standard Fasteners Ends of parts with external ISO metric thread ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO 4573: 2011 Fasteners Ends of parts with external ISO metric thread issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions IS 8536 : 1987 FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATION OF DIMENSIONS ( ISO 225 : 1983 First Revision ) ISO 4027, Hexagon socket set screws with cone point IS 6094 (Part 2): 2006 HEXAGON SOCKET SET SCREWS PART 2 WITH
17 CONE POINT ( Third Revision) ISO 4027:2003 For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
18 For Comments only Doc. No.: PGD 37(10531) W IS 3458: XXXX ISO 1119: 2011 July 2016 Draft Indian Standard Geometrical product specifications (GPS) Series of conical tapers and taper angles ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO 1119 : 2011 Geometrical product specifications (GPS) Series of conical tapers and taper angles issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO 3040, Geometrical product specifications (GPS) Dimensioning and tolerancing Cones IS : 1993 TECHNICAL DRAWINGS - DIMENSIO-NS AND TOLERANCING OF CONES ( First Revision ) ISO 3040 : 1990
19 For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
20 For Comments only Doc. No.: PGD 37(10532) W IS 4206: XXXX ISO 888 : 2012 July 2016 Draft Indian Standard Fasteners Bolts, screws and studs Nominal lengths and thread lengths ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO 888 : 2012 Fasteners Bolts, screws and studs Nominal lengths and thread lengths issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw threads IS 4218 (Part 1):2001 ISO General purpose metric screw threads: Part 1 Basic profile (second revision) ISO 681:1998
21 ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions IS 8536 : 1987 FASTENERS BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATION OF DIMENSIONS ( First Revision ) ISO 225 : 1983 ISO 4753, Fasteners Ends of parts with external ISO metric thread Doc. No.: PGD 37( ) IS 1368: XXXX Fasteners Ends of parts with external ISO metric thread IS 1367 ( Part 2) : 2002 Technical Supply Conditions for Threaded Steel Fasteners - Part 2 Tolerances for Fasteners Bolts Screws Studs and Nuts Product Grades A B and C (Third Revision ) ISO 4573: 2011 ISO , Tolerances for fasteners Part 1: Bolts, screws, studs and nuts Product grades A, B and C ISO : 2000 For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
22 For Comments only Doc. No.: PGD 37(10533) W IS (Part 1) : XXXX ISO : 2013 July 2016 Draft Indian Standard ISO general purpose metric screw threads Tolerances Part 1: Principles and basic data ICS Not to be reproduced without permission of BIS or used as Standard Last date for receipt of comment is NATIONAL FOREWORD This Draft Indian Standard which is identical with ISO : 2013 ISO general purpose metric screw threads Tolerances Part 1 : Principles and basic data issued by the International Organization for Standardization (ISO) will be adopted by the Bureau of Indian Standards on the recommendation of the General Engineering and Fasteners Standards Sectional Committee and approval of the Production and General Engineering Division Council. The text of ISO Standard has been approved as suitable for publication as Indian Standard without deviation. Certain terminology and conventions are, however, not identical to those used in the Indian Standards; attention is particularly drawn to the following: a) Wherever the words `International Standard appears, referring to this standard, they should be read as `Indian Standard b) Comma (,) has been used as decimal marker while in Indian Standards it is current practice to use a full point (.) as the decimal marker. In adopted standard, references appear to certain International Standards for which Indian Standards also exist. The corresponding Indian Standards which are to be substituted in their respective places are listed below along with their degree of equivalence for the editions indicated: International Standard Corresponding Indian Standard Degree Of Equivalence ISO 68-1, ISO general purpose screw threads Basic profile Part 1: Metric screw threads IS 4218 (Part 1):2001 ISO General purpose metric screw threads: Part 1 Basic profile (second revision) ISO 681:1998 ISO 261, ISO general purpose metric 1S4218 ( Part2 ) :2001 ISO GENERAL
23 screw threads General plan PURPOSE METRIC PART 2 GENERAL PLAN ( Second Revision ISO 261:1998 ISO 1502, ISO general-purpose metric screw threads Gauges and gauging IS 2334:2001 ISO GENERAL PURPOSE METRIC SCREW THREADS GAUGES AND GAUGING (Second Revision) IS/ISO 5408 : 2009 Screw threads Vocabulary ISO 5408, Screw threads Vocabulary ISO 1502:1996 Identical For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
BUREAU OF INDIAN STANDARDS
व य पक पररच लन स द प रल ख प र षण स ज ञ पन स दर ददन क ईट ड 44/ ट -18 05-02-2019 तकन क सम तत ईट 44 प र षत : 1. ईट ड 44 क सभ सदस य 2. व द य त तकन क व भ ग पर षद क सभ सदस य तथ 3. र च खन ल अन य सभ ननक य मह दय,
More informationDOCUMENT DESPATCH ADVICE
DRAFT IN WIDE CIRCULATION REF: PCD 3/( 2749 to 2754)C DATE: 11-10-2013 DOCUMENT DESPATCH ADVICE TECHNICAL COMMITTEE: Petroleum Lubricants and Related Products Sectional Committee, PCD 3 To i) All interested
More informationBUREAU OF INDIAN STANDARDS
BUREAU OF INDIAN STANDARDS Manak Bhavan, Doc 9 ETD/42/ Bahadur 11303 Shah Zafar Marg New Delhi 110002 Phones 2323 0131 2323 3375 Extn 4284 TeleFax +91 11 2323 1192 Website : www.bis.org.in email : eetd@bis.org.in
More informationDOCUMENT DESPATCH ADVICE Ref: ME 28/T-72 Date: Mechanical Vibration and Shock Sectional Committee, MED 28
DRAFT STANDARD IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref: ME 28/T-72 Date: 10-11-2015 Mechanical Vibration and Shock Sectional Committee, MED 28 TO: a) The interested members of Mechanical Engineering
More informationBUREAU OF INDIAN STANDARDS
Manak Bhavan, 9 Bahadur Shah Zafar Marg New Delhi 110002 व य पक पर च लन स द तकन क सम तत ईट 44 र षत : 1. ईट ड 44 क सभ सदस य 2. व य त तकन क व भ ग पर षद क सभ सदस य तथ 3. च खन ल अन य सभ ननक य रल ख र षण स ञ
More informationय पक पर च लन म मस द. DRAFT IN WIDE CIRCULATION रल ख र षण स ञ पन/DOCUMENT DESPATCH ADVICE स दभभ /Ref. प ज ड 08/(1405, 1406)डब य. ददन क/Date
BUREAU OF INDIAN STANDARDS Manak Bhavan, 9, Bahadur Shah Zafar Marg, New Delhi-110002 Website:www.bis.org.in, Phones: 23230131, 23233375, 23239402 Production and General Engineering Department, email:pgd@bis.org.in
More informationDocument under wide circulation
Address: Manak Bhavan 9, Bahadur Shah Zafar Marg, New Delhi-110002 Ph: 011 23230131, 23233375, 23239402 http://www.bis.org.in Email pgd@bis.gov,in Production and General Engineering Department Document
More informationच क त स उप रण एव अस पत ल य जन ववभ ग डडकल डड इस स फ ट यर - स फ ट यर ज न चक कक य ए
भ रत य म नक ब य र (उपभ क म मल, ख़ द एव स वजन क नवतरण म त लय,भ रत सरक र) BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public distribution, Govt. of India) म नक भवन,9 बह द रश ह जफर म र
More informationट ल फ क स : Please Contact at Telefax in; व य पक पर च लन म मस द DRAFT IN WIDE CIRCULATION
ट ल फ क स : 23231085 Please Contact at Telefax 23231085 E-mail: hmtd@bis.org. in; mtd@bis.org.in व य पक पर च लन म मस द DRAFT IN WIDE CIRCULATION प रल ख प र षण स चन /DOCUMENT DESPATCH ADVICE एमट ड 11/ट
More informationभ र य म नक ब य र. BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public Distribution, Govt. of India) 3) All others Interested
भ र य म नक ब य र (उपभ क म मल, एव स ववजतनक वव रण म त र लय, भ र सरक र) BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public Distribution, Govt. of India) म नक भवन, बह द र श ह ज़फर म र व,
More information(आई एस ओ : 2016 क अचधग रहण) (पह प न क षण )
भ र य म नक ब य र (उपभ क म मल, एव स ववजतनक वव रण म त र लय, भ र सरक र) BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public Distribution, Govt. of India) म नक भवन, बह द र श ह ज़फर म र व,
More informationव य पक पररचलन भ रत य म नक ब य र BUREAU OF INDIAN STANDARDS तकन क सम मत ए एच ड 06
भ रत य म नक ब य र (उपभ क त म मल, ख द य एव स वजन क नवतरण म त र लय, भ रत सरक र) BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public distribution, Govt. of India) म क भव, 9 बह द रश ह जफर
More informationDRAFT IN WIDE CIRCULATION
DRAFT IN WIDE CIRCULATION Management and Productivity Sectional Committee, MSD 4 All members of Management and Productivity Sectional Committee, MSD 4 Management and Systems Division Council, MSDC Quality
More informationट ल फ क स : Please Contact at Telefax in; व य पक पर च लन म मस द DRAFT IN WIDE CIRCULATION
ट ल फ क स : 23231085 Please Contact at Telefax 23231085 E-mail: hmtd@bis.org. in; mtd@bis.org.in व य पक पर च लन म मस द DRAFT IN WIDE CIRCULATION प रल ख प र षण स चन /DOCUMENT DESPATCH ADVICE एमट ड 11/ट
More informationDOCUMENT DESPATCH ADVICE
DRAFT IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE REF: DATE Doc:PCD 3(2866)C 02 09 2015 Technical Committee: Petroleum and Related Products Sectional Committee, PCD 3 Dear Sir, i) All interested members
More informationIS : 2019 Doc No. TED 22 (13679) ISO : 2016
Please Contact at Telefax ट ल फ क स: 011 2323 6311 व य पक प पक च ल लम स द पर वहन ट र क ट, ट र ल औ औद य ग क ट रक ववषय सम त, ट ईड 22 प) पक च वहम इ ज नमयच ग ववभ ग पक च षद पक इववपक प सभ सदस य प E-mail: ted@bis.org.
More informationFORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS
FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS (Please use A4 size sheet of paper only and type within fields indicated. Comments on each clauses/sub-clauses/table/fig. etc be started on a fresh box. Information
More informationव य पक पररचलन भ रत य म नक ब य र BUREAU OF INDIAN STANDARDS तकन क सम मत ए एच ड 06
भ रत य म नक ब य र (उपभ क त म मल, ख द य एव स वजन क नवतरण म त र लय, भ रत सरक र) BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public distribution, Govt. of India) म क भव, 9 बह द रश ह जफर
More informationइल क ट र तनक एव इल क ट क ट रकल स घटक व उपस क क मलए
र त य म नक ब य म नक भवन, 9 बह द र ह जफर म गर, नई ददल ल --110002 (उपभ क म मल, ख द य ए व स वरजतनक पव रण म त र लय, भ र सरक र( Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi-110002 BUREAU OF INDIAN STANDARDS
More information(आई एस ओ : 2013 क अचधग रहण) (पह प न क षण)
भ र य म नक ब य र (उपभ क म मल, एव स ववजतनक वव रण म त र लय, भ र सरक र) BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public Distribution, Govt. of India) म नक भवन, बह द र श ह ज़फर म र व,
More informationSTEEL TUBES, PIPES AND FITTINGS SECTIONAL COMMITTEE, MTD 19 क) ध त क म इ ज तनयर ग ववभ ग पर षद (ए ट ड स ), क र चच खन व ल सदस य.
ट ल फ क स : 23231085 Please Contact at Telefax 23231085 E-mail: mtd@bis.org. in, hmtd@bis.org.in व य पक पर च लन स द DRAFT IN WIDE CIRCULATION प ल ख प षण स चन /DOCUMENT DESPATCH ADVICE एमट ड 19/ट -33 MTD
More informationTechnical Committee: LITD 02 LITD 02/T
DRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref Date Technical Committee: LITD 02 LITD 02/T-46-51 21-06-2016 ADDRESSED TO: 1. All members of Reliability of Electronic and Electrical components
More informationएमट ड 4/ट -134 MTD 4/T-134 dated
ट ल फ क स : 23231085 Please Contact at Telefax 23231085 E-mail: mtd@bis.org. in व य क र च लन स द DRAFT IN WIDE CIRCULATION प ल ख प षण स चन /DOCUMENT DESPATCH ADVICE प टव इस त उत द क पवषय सम तत ए ट ड 04
More information(प लयम, क यल एव स ब धत उ प द वभ ग)
(प लयम, क यल एव स ब धत उ प द वभ ग) (PETROLEUM, COAL & RELATED PRODUCTS DEPARTMENT) स दभ: प स ड 12 (13276) C दन क: 04/12/2018 य पक प रच लन मस द तकन क स म त प स ड 12 षत 1. तकन क सम त, प स ड 12 एव इसक सभ
More informationएम एच ड 12/ ट
भ रत य म नक र (उपभ म मल, ख एव स व ज नक वतरण म र लय, भ रत सरक र) BUREAU OF INDIAN STANDARDS (Ministry of Consumer Affairs, Food & Public distribution, Govt. of India) म नक भवन, 9 बह द रश ह जफर म ग, नई द
More informationय प च ल म म द र ख रषण द ञ म ईट ड 28/ ट - 2, ट -3, ट -7, ट -17, ट -40, ट -41
BUREAU OF INDIAN STANDARDS Manak Bhavan, 9 Bahadur Shah Zafar Marg New Delhi 110002 Phones 2323 0131 2323 3375 Extn 4284 TeleFax +91 11 2323 1192 Website : www.bis.org.in email : eetd@bis.org.in य प च
More informationi) DOC : CHD 35 (10850)P IS 5182 (P art 5):... METHODS FOR MEASUREMENT OF AIR POLLUTION Part 5 Sampling of Gaseous Pollutants (First Revision)
PRELIMIMARY DRAFT CIRCULATION Our Ref : CHD 35/T- Doc (10850)P Date : 06 10 2016 Air Quality Sectional Committee, CHD 35 ADDRESSED TO: 1)All Members of Air Quality Sectional Committee, CHD 35 2) All others
More informationDOCUMENT DESPATCH ADVICE Ref: ME 28/T-17, 23, 39, 40, 3,7,16, 31 Date: DRAFTS IN WIDE CIRCULATION
Phone/fax 011 23232509 DRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref: ME 28/T-17, 23, 39, 40, 3,7,16, 31 Date: 11-02-2014 email: med@bis.org.in To: MECHNICAL VIBRATION AND SHOCK SECTIONAL COMMITTEE,
More informationसम मततय भ जन क अ ततम ततथ
व य पक पर च लन मस द तकन क सममतत : ज त व षय सममतत स एचड 19 र प तकत भ 1 स एचड 19 क स सदस य 2 स एचड 19 प नल क स सदस य 2 अन य चच ननक य हम र स द भ: स एचड 19 /रल ख (10963)स ददन क : 18 11 2016 मह दय(य )/, मह
More informationStatistical Methods for Quality and Reliability Sectional Committee, MSD 3
MANAGEMENT AND SYSTEMS DEPARTMENT Tele/FAX: 011-23231106, Email: msd@bis.org.in DRAFT IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Statistical Methods for Quality and Reliability Sectional Committee, MSD
More informationDRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE MHD 02/T-143, 144, 145, 146, 147 & TECHNICAL COMMITTEE: MHD 02 ADDRESSED TO:
DRAFTS IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHD 02 DOCUMENT DESPATCH ADVICE Ref Date MHD 02/T-143, 144, 145, 146, 147 & 148 21-09-2012 ADDRESSED TO: 1. All members of Orthopaedic Instruments, Implants
More informationक न द र य म ह व भ ग भ स द भ- स ए ड -III/16: IS
क न द र य म ह व भ ग - III भ स द भ- स ए ड -III/16: IS 4984 03 07 2017 ग षय म ह- पवनभ क ष त आई एस 4984 : 2016 क परभप लन ललए एस ट आई Doc: STI/4984/7, इस उपर क त व षय क स दर भ ह सक षम प र ध क र न IS 4984 :
More information(अन भ ग अध क र ) (स ए ड -3)
क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/16: आई एस 15511 17 भ 2016 ग षह- आई एस 15511:2004 स ईककल ज ज भ एस.ट.आई क क ह भद ह सषम अध क र व र स लगन एस.ट.आई क अन म दन कर ददय गय ह यह सभ क रय ग ह त ह आई एस 15511:2004
More informationDRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE MHD 10/ T- 2,3,41,33,43,44,45,46,47,48 10/02/2015 TECHNICAL COMMITTEE: MHD 10
DRAFTS IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHD 10 DOCUMENT DESPATCH ADVICE Ref Date MHD 10/ T- 2,3,41,33,43,44,45,46,47,48 10/02/2015 ADDRESSED TO: 1. All members of Medical Laboratory Instruments
More informationSolutions for Full Length Test - 1
Solutions for Full Length Test - 1 1 - B 2 - C 3 - D 4 - C 5 - A 6 - A 7 - A 8 - D 9 - D 10 - A 11 - A 12 - B 13 - B 14 - A 15 - A 16 - A 17 - D 18 - C 19 - C 20 - A 21 - A 22 - D 23 - C 24 - D 25 - D
More informationभ रत य क त रम अ ग नम र ण नगम (ए ल क ) (भ रत सरक र क एक मन र न उपक रम) ज.ट. र ड, क नप र ISO 9001:2008
भ रत य क त रम अ ग नम र ण नगम (ए ल क ) (भ रत सरक र क एक मन र न उपक रम) ज.ट. र ड, क नप र-209217 ISO 9001:2008 अन ब ध क आध र पर आर.स.आई. प ज क त प र थ ट ट और आथ ट ट प र फ शनल क इ ग जम ट भ रत य क त रम अ ग
More informationTITLE : Biological evaluation of medical devices-part 1: Evaluation and testing within a risk management process
DRAFTS IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHD 19 DOCUMENT DESPATCH ADVICE Ref Date MHD 19/ T- 1,2,12,13,14 12/07/2012 ADDRESSED TO: 1. All members of Immuno-Biological Diagnostic Kits Sectional Committee,
More informationDoc: CHD 15 (11942)C
DRAFT IN WIDE CIRCULATION Document Dispatch Advice Ref. Date Doc: CHD 15 (11942)C 04 10 2017 TECHNICAL COMMITTEE PAPER AND ITS PRODUCTS SECTIONAL COMMITTEE, CHD 15 ----------------------------------------------------------------------------------------------------
More informationMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG, NEW DELHI
MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG, NEW DELHI 110002 व य प परर लन द र दर भ : ईड 2:2/ट -100 03 03 2017 त न त : स म ट और क क ट व षय सममत, स ईड, 2 प प त त भ : 1 ल इ ज न यर र ग पररहद र रखन ल दस य 2 स
More informationम नक भवन, 9 बह द रश ह फर म ग, नई दद ल ट ए स 23 / ट
म नक भवन, 9 बह द रश ह फर म ग, नई दद ल 110002 Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002 द रभ ष 23231282 Website: www.bis.org.in त र: म नकस थ Phones 23230131 email: txd@bis.org.in Grams:
More information1. All Members of Sugar Industry Sectional Committee, FAD 2 2. Selected members of FADC 3. All interested
DRAFT(S) IN WIDE CIRCULATION TECHNICAL COMMITTEE: FAD 2 DOCUMENT DISPATCH ADVICE Our Ref: Date FAD 2/T 31-05-2012 ADDRESSED TO: 1. All Members of Sugar Industry Sectional Committee, FAD 2 2. Selected members
More informationMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG, NEW DELHI
110002 MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG, NEW DELHI व य पक परर लन म ग़द म र द भ : ईड 2:1/ट -67 19 10 2016 त कन क मममत : म ट और क र ट म हय मममत, ईड, 2 र प त कत भ : 1 म म ल इ ज मनयर म ग पररहद क म रखन
More information1. प स ड 21 क सम त सद य 2. प लयम, क यल एव स ब धत उ प द वभ ग प रषद (प स ड स ) क सद य 3. च रखन व ल सभ नक य
य पक प रच लन मस द स दभ दन क प स ड 21/IS 11352 23-05-2013 तकन क स म त : प स ड 21 षत 1. प स ड 21 क सम त सद य 2. प लयम, क यल एव स ब धत उ प द वभ ग प रषद (प स ड स ) क सद य 3. च रखन व ल सभ नक य मह दय/मह दय,
More informationद यब ष Website: Phones ट एक स ड 36 / ट
म नक भवन, 9 बह द रश ह ज फर म गग, नई ददल ऱ 110002 Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002 व य eपकपररच ऱन मस द द यब ष 23231282 Website: www.bis.gov.in Phones 23230131 email: txd@bis.gov.in
More informationभ रत य म नक ब य र (क द र य म हर व भ ग III) सभ श ख क य भलय स अन र ध ह क उपर क त ददश वनद श क अन प लन तत क ल प रभ स स वनव त कर
भ रत य म नक ब य र (क द र य म हर व भ ग III) हम र स दभभ : स एम ड - III/16 : 1180 (Part 1) 17 म र भ 2017 व षय : IS 1180 (Part 1): 2014 क स श धन स ख य -2 क अन प लन ह त ददश वनद श और प नर व त एस ट आई इस उपर
More informationDRAFT IN WIDE CIRCULATION CED 53/T January 2019
DRAFT IN WIDE CIRCULATION Reference Date CED 53/T-33 01 January 2019 TECHNICAL COMMITTEE: Cement Matrix Products Sectional Committee, CED 53 ADDRESSED TO : 1. All Members of Civil Engineering Division
More informationय प च ल लम म स. DRAFT IN WIDE CIRCULATION रल ख र षण स लम /DOCUMENT DESPATCH ADVICE एमट ड 13/ट -8, 22, 73 MTD13/T-8, 22, 73 dated
ट ल फ स : 23231085 Please Contact at Telefax 23231085 E-mail: mtd@bis.org. in य प च ल लम म स DRAFT IN WIDE CIRCULATION रल ख र षण स लम /DOCUMENT DESPATCH ADVICE एमट ड 13/ट -8, 22, 73 MTD13/T-8, 22, 73 dated
More informationभ रत य म नक मस द स लर क कर ब स ट इप व श भ ग 1 अप ए ( आइ एव भ ग 1 क दस ण व धय ( आइ एव भ ग 3 क दस
य पक प रच लन म मस द ल ख षण स पन स दभ द न क एम.ई.ड. 4/T-14,15 & 16 नवकरण य उज त क 24 08 2016 वषय स म त, एम.ई.ड. 04 1 य क इ ज नयर नवकरण य उज 2 3 अ य वभ ग प रषद क सभ सद य (य. व.प.) त क वषय स म त, एम.ई.ड.
More informationDoc: CED 54 (10573) WC
व य पक पर च लन मस द हम स दर भ : स ईड 54 /ट 13 01 अगस त 2016 तकन क सममतत : क क र ट प रबलन व षय सममतत,स ईड 54 ------------------------------------------------------------------------------------ प र प तकत
More information(ड चद र ) ञ न क ई (स ए ड -3)
क द र ह व भ ग 3 स द भ- क द र ह व भ ग -3/ 16: आई एस 14561 14 द स बर 2015 ग षह- स श ध त आई एस 14561 क एस.ट.आई क क ह भद ह त यह स च त क य ज त ह क आई एस 14561 क एस.ट.आई स श च त ज ह और सषम र च र आ श न स र इस
More informationi) DOC : CHD 35 (10810)P IS 5182 (P art 7):... METHODS FOR MEASUREMENT OF AIR POLLUTION Part 7 Hydrogen Sulphide (First Revision)
PRELIMIMARY DRAFT CIRCULATION Our Ref : CHD 35/T- Doc (10810)P Date : 06 10 2016 Air Quality Sectional Committee, CHD 35 ADDRESSED TO: 1)All Members of Air Quality Sectional Committee, CHD 35 2) All others
More information: प य वरण रब धन ववष सम तत स एचड 34
यपक पचरचय न स य र स दभ: स एचड 34/ (2284)स दन र तकन क सम तत : : 12 01 2016 प य वरण रब धन ववष सम तत स एचड 34 र तरत 1 स एचड 34 र सभ सद य 3 स एचड 34:प 2 स स एचड 34 प 6 और स एचड 34:प 9 स स एचड 34:प 11 र सभ
More informationHead (CMD-2)(sd/-) Circulated to All ROs/BOs/FAD and MSD Copy to: ITS for hosting on intranet
क द य म हर व भ ग-2 स दभभ: CMD-2/16: 8498 04 09 2017 व षय: आई एस 8498:2013 क प र प एस ट आई ए ददश न द श यह आई एस 8498:1977 स आई एस 8498:2013 क स श धन क स दर भ म ह यह उत प द प म णन क अध न ह और ब आई एस व बस
More informationDisclosure to Promote the Right To Information
इ टरन ट म नक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information
More informationNRDC signs agreement for commercializing NEMHARI -A Plant based Formulation for Management of Mulberry Root Knot Disease
Ministry of Science & Technology 12-April, 2016 15:46 IST NRDC signs agreement for commercializing NEMHARI -A Plant based Formulation for Management of Mulberry Root Knot Disease The National Research
More informationक न र य व भ ग -2 हम र स दर भ: स एमड 2/16: व षय: आई एस 7903:2017 क प प एसट आई
क न र य व भ ग -2 हम र स दर भ: स एमड 2/16: 7903 21 12 2017 व षय: आई एस 7903:2017 क प प एसट आई यह आई एस 7903:2011 स आईएस 7903:2017 क स श धन क ह यह उत प द प म णन क अध न ह और ब आईएस बस इट क अन स र आज कक त
More informationस ईड 54 (10574) WC र त य म नक IS 9417 क व व दत य प न क षण क मस द - प रबमलत क ट स चन क मलए उच च शव तत इस प त क सर य क मलए ल ड क न क मसफ र श
व य पक पर च लन मस द हम स दर भ : स ईड 54 /ट 15 01 अगस त 2016 तकन क सममतत : क क र ट प रबलन व षय सममतत,स ईड 54 ------------------------------------------------------------------------------------ प र प तकत
More informationMinistry of Science & Technology. 08-April, :56 IST
Ministry of Science & Technology 08-April, 2016 12:56 IST NRDC signs Licence Agreement with M/S Nagarjuna Agro Chemicals Pvt. Ltd. for Soil Moisture Indicator of Indian Council of Agriculture Research
More informationCENTRAL MARKS DEPARTMENT-3. Our Ref: CMD-3/16: Subject: STI as per IS 13714: 1993 DUNNAGE PALLETS-WAREHOUSING
क द र ह व भ ग 3 द भ- क द र ह व भ ग -3/ 16: आई ए 13714 06.09. 2016 ग ह- आई ए 13714 : 1993 क ल ए ए ट आई आई ए 13714 : 1993 ल भ र (ड ज) प ट भ ड र ग़ क ल ए पर षण और ल ररषण य ज क य वय क ल ए ष ल य क य य एश ष ख
More informationPUBLICATION AND GRAPHIC TECHNOLOGY SECTIONAL COMMITTEE, MSD 6
DRAFT IN WIDE CIRCULATION Reference Date MSD 6/T-34 09-11-2015 PUBLICATION AND GRAPHIC TECHNOLOGY SECTIONAL COMMITTEE, MSD 6 All members of : Publication and Graphic Technology Sectional Committee, MSD
More informationDemand No. 1. Department of Agriculture & Cooperation (म य श ष )
स य 1 - क ष एव सहक रत वभ ग No. 1 - Department of Agriculture & Cooperation 1 Demand No. 1 Department of Agriculture & Cooperation III - : III - The details are as follows : Charged Voted Revenue Capital
More informationसम म तय भ जन क अ तम त थ सम म तय य द क ई ह त क पय अध हस त र त क उपर ल खत फ क स न य ई म ल पर स लग न फ म ट म भ ज
व य पक प रच लन मस द हम र स दभ :स एचड 1 ( 12766) C दन क: 14 06 2018 तकन क स म त : अज वक रस यन वषय स म त, स एचड 01 प तकत 1 स एचड 01 क अध य और सभ सदस य 2 स एचड 01 क उपस म त क स य जक और सभ सदस य 3 च रखन व
More information10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II SEC. 3(i)] अ धस चन
10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II SEC. 3(i)] अ धस चन नई द ल, 16 फरवर, 2015 स.क क. न न. 103(अ). भ रत य वन स व (स वग ) नयम वल, 1966 क नयम 4 क उप- नयम 2 क स थ प ठत अ खल भ रत य स व ए अ ध नयम,
More informationDRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE
DRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref. Date MED 08 /T-18 24 01 2019 Mining Techniques and Equipment Sectional Committee, MED 08 i) All Members of Mechanical Engineering Division Council
More informationअ0पक ल1न &न2वद आम 4ण स चन
न शनल स स क रप र शन लमट ड (भ रत सरक र क उपम) श खप र, र ज ब ज र पटन -800014 स.-101/पटन : सड़क &नम 'ण/स.एस.आर./एन.एस.स.-इ ज/2016-17 -दन क: 25-08-2016 अ0पक ल1न &न2वद आम 4ण स चन us kuy lhm~l dkjiksjs ku fy0
More informationQuestion Bank Part-I-Functions and structure of Accounts Deptt.
Sub: Accounts Question Bank Prepared by: Professor Accounts Mgt. Part-I-Functions and structure of Accounts Deptt. (1) Financial objective of IR is ---------------------------------------------------------------
More informationप य वरण रब धन ववष सम तत स एचड 34
यपक पचरचय न स य र स दभ: स एचड 34/ (2181,2215,2216)स दन र : 26 अग त 2015 तकन क सम तत : प य वरण रब धन ववष सम तत स एचड 34 र तरत 1 स एचड 34 र सभ सद य 3 स एचड 34:प 2 स स एचड 34 प 6 और स एचड 34:प 9 स स एचड 34:प
More informationइ ड यन ऑयल क र पर प शन डलड ट (र इर ल इन प रभ ग) बर न क नर र र इर ल इन र स ट ऑड स- बर न ऑयल रर इनर ब ग सर य (डबह र)
इ ड यन ऑयल क र पर प शन डलड ट (र इर ल इन प रभ ग) बर न क नर र र इर ल इन र स ट ऑड स- बर न ऑयल रर इनर ब ग सर य- 851114 (डबह र) 1 क यप क न Name of Work 2 3 4 5 6 डनड द स ख य Tender No. डनड द क प रक र Tender
More information(PETROLEUM, COAL & RELATED PRODUCTS DEPTT.)
(PETROLEUM, COAL & RELATED PRODUCTS DEPTT.) स द भ : प स ड 12 (10067) स 11 म भ 2016 य पक परर लन मस द तकन क समममत: प स ड 12 र ष त 1 प र ष यम, क य एव स ब ष त उत प द षवभ ग पर द (प स ड स ) क सदस य 2 षट क सषमषत,
More informationइ ड यन ऑयल क र पर प शन डलड ट (र इर ल इन प रभ ग) बर न क नर र र इर ल इन र स ट ऑड स- बर न ऑयल रर इनर ब ग सर य (डबह र)
इ ड यन ऑयल क र पर प शन डलड ट (र इर ल इन प रभ ग) बर न क नर र र इर ल इन र स ट ऑड स- बर न ऑयल रर इनर ब ग सर य- 851114 (डबह र) 1 क यप क न Name of Work 2 3 4 5 6 डनड द स ख य Tender No. डनड द क प रक र Tender
More informationCENTRAL MARKS DEPARTMENT-2. Ref: CMD-2/16:
CENTRAL MARKS DEPARTMENT-2 Ref: CMD-2/16:15694 05 09 2016 Subject: Implementation of STI (Doc: STI/15694/1, ) for IS 15694:2006 Potassium Iodate, Food Grade Please find enclosed STI for IS 15694:2006 Potassium
More information: ए ड 08/ट (12397) क : म म : व म क ए स मस थ म म म, ए ड 08 1 ए ड 08 ( ), 1 ए :... ए ड 08 (12397) (.. )
ठ ल म म : व म क ए स मस थ म म म, ए ड 08 प 1 ए ड 08 3 ए ड 08 ल 3 र म ल म : ए ड 08/ट (12397) क : 16 03 2018 ( ), म मलम प : 1 ए 45001 :... ए ड 08 (12397) व म स स ए क प त मलए म क ए ( क ) ल म ह ए क क ट र प म
More informationlimbus technology pvt ltd.
Welcome to the world of health and wealth opportunity with Limbuslife by limbus technology pvt ltd. www.limbuslife.com INSTRUCTIONS FOR USE AND INTRODUCTION Know us Limbus life is a unit of limbus technology
More information3 Major Challenges in Implementation of Safety System
BEST SAFETY WORK PRACTICES OF CONTRACTOR EMPLOYEES & WORKERS Kalindee Rail Nirman (A division of Texmaco Rail& Engineering Ltd.) Contents 1 Why Safety 2 Customer requirements 3 Major Challenges in Implementation
More informationCENTRAL MARKS DEPARTMENT-2
क य म हर वभ ग 2 हम र स दभ: स एमड 2/16: 7903 26 07 2016 वषय: आई एस 7903:2011 द- उ$च घन(व प लइथलन ब न कपड़ स बन 0तरप ल. 3 4प एसटआई स 7य /7903/4, ज ल ई 2016 अ>ययन क?लए स ल@न ह तदन स र सभ श ख ओ स अन र ध ह Hक
More informationनव म बई मह नगरप लक Municipal Corporation
नव म बई Navi Mumbai मह नगरप लक Municipal Corporation 3 र मजल,आर य वभ ग, एनएमएमस 3 rd FLOOR,HEALTH DEPT., NMMC BHAVAN, भवन, स -15ऐ, स.ब.ड.नव म बई 400 SEC-15A, CBD BELAPUR, 614.द र वन : 27567261 NAVI MUMBAI
More informationV.M. No. 670/XV-151/ April Tender Notice
V.M. No. 670/XV-151/2018 02 April 2018 Tender Notice Victoria Memorial Hall, 1 Queen s Way, Kolkata 700071 (2223-0953) invites sealed tenders for disposal of unserviceable materials etc.(as per list enclosed)
More informationDRAFT IN WIDE CIRCULATION
DRAFT IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref. Date MED 18 /T- 30 10 01 2019 Construction Plant and Machinery Sectional Committee, MED 18 1) All Members of Mechanical Engineering Division Council
More informationDOCUMENT DESPATCH ADVICE DRAFT IN WIDE CIRCULATION MHR 06 /T- 50/51/52/53/ TECHNICAL COMMITTEE: MHR 06
DRAFT IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHR 06 DOCUMENT DESPATCH ADVICE Ref Date MHR 06 /T- 50/51/52/53/54 09-05-2008 DOC NO: MHR 06 (0114)/ISO 7199:1996 TITLE Cardiovascular implants and artificial
More informationक द य म हर व भ ग-2 CENTRAL MARKS DEPARTMENT -2
क द य म हर व भ ग-2 स दभभ : स एमड -2 /16:16190 27.07.2017 व षय: आई एस 16190:2014 क वष स र दद सस च ई क स ए उच च घनत प इथ ई न (एच. ड.प.ई.) समन ट ड ब न फ ट ट य ब क तत स ब ध त एस ट आई (ड क: एस ट आई /16190/1
More informationन न ल खत क आप त और स थ पन क लए अ भ च क अ भ य त आम त क ज त ह क स म त क म ह ग और ईओआई क स ब ध म म ग सभ ल ख क त त क समय पर त त कय ज न च हए
स एसआईआर - र य अ त व षय व न तथ य गक स थ न CSIR - NATIONAL INSTITUTE FOR INTERDISCIPLINARY SCIENCE & TECHNOLOGY Industrial Estate PO., Pappanamcode, TRIVANDRUM-695019, KERALA, INDIA TELEPHONE -00-91-0471-2515239,
More informationPROFORMA FOR SUPPLYING NIT INFORMATION. R&R of ground floor path and ceiling at SLDC complex BBMB, Chandigarh Rs.1000/- (Non-Refundable)
PROFORMA FOR SUPPLYING NIT INFORMATION Tendering Authority Scope of Work Tender reference No. Last date of issue of Tender Documents Due date/ Time for submission of Tenders Date/ Time of opening of Tenders
More informationयदद क ई स त ल प न ल अवव स त क वल भ ष सलनलध रनदट नई उपर क
म नक भवन, 9 बह द रश ह फर म ग, नई दद ल 110002 Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi 110002 द रभ ष 23231282 Website: www.bis.org.in Phones 23230131 email: txd@bis.org.in 23233375 textiles.bis@gmail.com
More informationDRAFT IN WIDE CIRCULATION Document Despatch Advice
DRAFT IN WIDE CIRCULATION Document Despatch Advice TECHNICAL COMMITTEE INORGANIC CHEMICALS SECTIONAL COMMITTEE, CHD 01 ----------------------------------------------------------------------------------------------------
More informationProposed Terms of Reference for EIA studies of Jalkota -B, Mine, Area: ha. Madhya Pradesh Mining Corporation Bhopal To study the area surround
Proposed Terms of Reference for EIA studies of Jalkota -B, Mine, Area:- 14.430 ha. Madhya Pradesh Mining Corporation Bhopal To study the area surrounding 10 km radius of the mine lease area as the center.
More informationईट ड 09/ ट
BUREAU OF INDIAN STANDARDS Manak Bhavan, 9 Bahadur Shah Zafar Marg New Delhi 110002 Phones 2323 0131 2323 3375 Extn 4284 TeleFax +91 11 2323 1192 Website : www.bis.org.in email : eetd@bis.org.in व य पक
More informationDisclosure to Promote the Right To Information
इ टरन ट म नक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information
More informationश सदन (झ ल -घर) एव ड क यर स टर चल न ह त र चच क अश व यक तत
श सदन (झ ल -घर) एव ड क यर स टर चल न ह त र चच क अश व यक तत भ रत य प रब ध स स थ न इ द र अपन इ द र पररसर म अन भव और न म अभभकरण /ग र सरक र स गठन /स स थ न स भ सदन (झ ल -घर) एव ड क यर स टर चल न ह त र चच क अभभव
More informationस ल न प ए, (द सर स श धन) (स श धन 1 स 6 श "मल)
क य म हर वभ ग 2 हम र स दभ: स एमड 2/16:7123 16 12 2015 वषय : परण और नरण क# य जन, एसटआई Doc:STI/7123/4 *दस बर 2015 क श त ल क 0लए आई एस 7123:1993 क 2प म3 क पय स लन प ए, परण और नरण क# य जन, एसटआई Doc:STI/7123/4
More informationक पय इस मस द क अव क कर और अप सम मनतय यह बत त ह ए भ ज कक यदद यह मस द प रक ल त ह त इस पर अम कर म आपक व यवस य अथव क र ब र म क य कद इय आ सकत ह
व य पक पर च लन मस द हम स दर भ : स ईड 50 /ट 90 03 अगस त 2016 तकन क सममतत : प ल स स टक प इपप ग मसस टम प षय सममतत स ईड 50 प र पतकत भ: मह दय, 1 मसप ल इ ज तनय प र ग पर षद क र चच खन ल सदस य 2 स ईड 50 क सर सदस
More informationDisclosure to Promote the Right To Information
इ टरन ट म नक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information
More informationISO INTERNATIONAL STANDARD. Mechanical properties of corrosionresistant stainless steel fasteners Part 1: Bolts, screws and studs
INTERNATIONAL STANDARD ISO 3506-1 Second edition 2009-11-15 Mechanical properties of corrosionresistant stainless steel fasteners Part 1: Bolts, screws and studs Caractéristiques mécaniques des éléments
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3506-3 Second edition 2009-11-15 Mechanical properties of corrosionresistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress Caractéristiques
More informationNATIONAL CENTRE FOR CELL SCIENCE, PUNE
र ष ट र य क श क व ज ञ न क द र, प ण NATIONAL CENTRE FOR CELL SCIENCE, PUNE (ज प र द य ग क व भ, भ रत सरक र क स यत त स स थ ) (An autonomous Institution of the Department of Biotechnology, Government of India)
More informationप स ड 13/ट (1-2) स
य पक प रच लन मस द ल ख षण स पन स दभ दन क प स ड 13/ट (1-2) स 20-12-2012 तकन क सम त: प स ड 13 षत 1 प लयम, क यल एव स ब धत उ प द वभ ग प रषद (प स ड स ) क सद य 2 प स ड 13 स म त क सम त सद य 3 च रखन व ल सभ नक य
More informationमह र ष ट र र ज य क ष पणन म डळ षनध व यवस थ पन कक ष गररब षनमम लन स ठ जप नच षनध (JFPR) सह षययत लह न श तक-य न ब ज रप ठ श ज डण प रकल प
मह र ष ट र र ज य क ष पणन म डळ षनध व यवस थ पन कक ष गररब षनमम लन स ठ जप नच षनध (JFPR) सह षययत लह न श तक-य न ब ज रप ठ श ज डण प रकल प पत त - प ल ट न. एफ/ई/७८, भ षवक स ब क प रषशक षण क द र, तळमजल, म क ट य ड,
More informationA sum of money becomes ` 2016 in 2 years and ` 2124 in 3 years, at simple interest. What is the sum of money? Q2_OA ` 1700
COAL INDIA LIMITED RECRUITMENT OF MANAGEMENT TRAINEES 2016-17 MODEL QUESTIONS FOR PAPER-I :COMMON FOR ALL DISCIPLINES ENGLISH: Q1 What is the least number which when divided by 24, 96 and 84 leaves remainder
More informationNo. IITR/Advt.01/Scheme/2017 Dated:
No. IITR/Advt.01/Scheme/2017 Dated: 23-05-2017 Walk-in-Interviews for Project Assistant Level-II, Level-III & Junior Research Fellow, Senior Research Fellow Eligible and interested candidates may attend
More informationvlk/kj.k izkf/dkj ls izdkf'kr अ धस चन
jftlvªh laö Mhö,yö&33004@99 REGD. NO. D. L.-33004/99 vlk/kj.k EXTRAORDINARY Hkkx II [k.m 3 mi&[k.m (i) PART II Section 3 Sub-section (i) izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY la- 1029] ubz fnyyh]
More informationSTANDARD TERMS & CONDITIONS (INLAND ENQUIRY)
Annexure-1 STANDARD TERMS & CONDITIONS (INLAND ENQUIRY) 1. The quotations and any order resulting from this Enquiry shall be governed by BEL s conditions of contract and the supplier quoting against this
More information