CARBIDE. Being the best through innovation NC-SPOTTING DRILLS. - CENTERING and CHAMFERING

Transcription

1 Being the best through innovation - CENTERING and CHAMFERING

2 SELECTION GUIDE ITEM MODEL DESCRIPTION SIZE MIN MAX PAGE D5306 D5307, D D 1 D5315 D5318, D3.0 D 111 RECOMMENDED CUTTING CONDITIONS phone: , fax: , yg1@yg1.kr

3 SOLID SOLID For General materials, Cast steels, Cast iron, Non-ferrous materials : (Excellent) : (Good) Carbon Alloy Prehardened Hardened ~HB225 HB225~325 HRc30~45 HRc45~55 HRc55~ Cast Iron Aluminum Stainless Titanium Mild Copper Bronze phone: , fax: , yg1@yg1.kr 9

4 HSS D5306 SERIES D5307 SERIES i- -GENERAL, Application : For more precise centering work on NC/CNC Machines. The large diameter of the tool permits chamfering work after centering continuously. -SOFT -INOX -MQL TYPE for HARDENED GENERAL 120 P.112 NC-Spotting drills NC-Spotting drills 120 (Unit) : mm MULTI-1 D530 D53080 D5306 D D53061 D D530 D53080 D5307 D D53071 D HPD TiN(D6306,D6307), TiCN(DG306,DG307) and (DH306,DH307) are available on your request. GOLD-P WORM PATTERN STRAIGHT TAPER CENTER SPADE TECHNICAL DATA Carbon ~HB225 Alloy HB225~325 Prehardened HRc30~45 Hardened HRc45~55 HRc55~ Cast Iron Aluminum Stainless 1 phone: , fax: , yg1@yg1.kr : (Excellent) : (Good) Titanium Mild Copper Bronze

5 D5315 SERIES D5318 SERIES HSS, Application : For more precise centering work on NC/CNC Machines. The large diameter of the tool permits chamfering work after centering continuously. i- -GENERAL -SOFT -INOX -MQL TYPE 120 NC-Spotting drills NC-Spotting drills 120 P.112 (Unit) : mm for HARDENED GENERAL D53130 D53140 D531 D531 D53180 D5315 D D53151 D D D D53180 D53180 D D5318 D D53181 D MULTI-1 HPD TiN(D6315,D6318), TiCN(DG315,DG318) and (DH315,DH318) are available on your request. GOLD-P WORM PATTERN STRAIGHT TAPER Carbon ~HB225 Alloy HB225~325 Prehardened HRc30~45 Hardened HRc45~55 HRc55~ Cast Iron Aluminum Stainless : (Excellent) : (Good) Titanium Mild Copper Bronze phone: , fax: , yg1@yg1.kr 111 CENTER SPADE TECHNICAL DATA

6 HSS RECOMMENDED CUTTING CONDITIONS i- -GENERAL NC - SPOTTING, 120 D5306, D5307, D5315, D5318 SERIES (Unit) : mm -SOFT -INOX -MQL TYPE for HARDENED WORK MATERIAL NON-ALLOY ALLOY SOFT GREY CAST IRON HARD GREY CAST IRON STAINLESS Al-Si ALLOYS, Si<% Al-Si ALLOYS, Si>% Ti, Ni ALLOY STRENGTH < 0 N/mm 2 < 0 N/mm 2 < HB0, GG25 < HB300, GG40 DIAMETER N S N S N S N S N S N S N S N S N = R.P.M S = Feed per Revolution (mm/rev.) GENERAL MULTI-1 HPD GOLD-P WORM PATTERN STRAIGHT TAPER CENTER SPADE TECHNICAL DATA 112 phone: , fax: , yg1@yg1.kr