Materials Information Tracking System / Producer Lab Analysis and Information Detail (MITS/PLAID)
|
|
|
- Joel Park
- 6 years ago
- Views:
Transcription
1 Materials Information Tracking System / Producer Lab Analysis and Information Detail (MITS/PLAID) David A. Kaulfers, P.E., PMP Assistant State Materials Engineer
2 MITS/PLAID What is MITS/PLAID? Purpose Requirements Contacts Future 2
3 What is MITS/PLAID MITS & PLAID is A centralized online database where Hot Mix Asphalt (HMA) & Central Mix Aggregate (CMA) job mixes and sample results are submitted and approved and Can be viewed by the Department and the Producer. MITS: Materials Information Tracking System Department Side PLAID: Producer Lab Analysis and Information Detail Producer Side 3
4 Purpose "doveryai no proveryai" Reagan to Gorbachev You repeat that at every meeting Gorbachev to Reagan 4
5 Purpose Trust but verify 5
6 Purpose Meet Federal Regulations - Sec Sampling and testing program. (ii) Quality control sampling and testing results may be used as part of the acceptance decision provided that: (A) The sampling and testing has been performed by qualified laboratories and qualified sampling and testing personnel. Materials Cert Schools (B) The quality of the material has been validated by the verification testing and sampling. The verification sampling shall be performed on samples that are taken independently of the quality control samples. MITS/PLAID (c) The quality control sampling and testing is evaluated by an Independent Assurance (IA) program. - VDOT 6
7 Purpose Ability to monitor acceptance testing results and the quality assurance results, both for the Producer and Department. Saves time as all the information is in one place The Contractor can see VDOT QA test results Action can be taken immediately if a discrepancy is found between VDOT test results and Producer test results close to real time monitoring 7
8 MITS Allows VDOT personnel to: Approve job mixes Enter QA testing data Enter project information See contractors submitted data Close out lots & projects Run lot adjustments Run comparison reports 8
9 MITS VDOT s View 9
10 PLAID Allows producers to: Submit job mixes Submit sample data, test results & tonnages See VDOT testing results Run a report of all their submitted data 10
11 PLAID Notifications the Producer gets 11
12 Job Mix Form 12
13 TL-50 Volumetrics 13
14 Requirements Hot Mix Asphalt (HMA) The Contractor shall submit a job-mix formula for each mixture for approval through PLAID. Paper copies of the job mix formula along with supporting documentation shall also be submitted to the Department. The Contractor shall input such test results within 24 hours of sampling to the Department through PLAID, unless otherwise approved by the Materials Engineer. Central Mix Aggregate (CMA): The Contractor shall submit, or shall have the source of supply submit a job-mix formula for each mixture for approval through PLAID prior to starting work. The Contractor shall provide test results determining grading, moisture and Atterberg limits within 48 hours of sampling to the Department through PLAID. 14
15 Requirements Why is there a difference: Different Programs Different Specifications Different test methods/properties being reported. Testing being done for asphalt should be completed within 24 hours Aggregate testing can take up to 48 hours 15
16 Issues General Contractor Access to Information - Producer provides access - Producer provides specific Job Mix Data Merging companies Enforcement across districts 16
17 Future Add more report capabilities Randomness histogram report Control Charts Requirement nonetheless Monitor performance of job mix formula via a scorecard Generate notifications if report results are adverse Streamline processes for all districts to follow 17
18 District Contacts District HMA CMA Bristol Brian Truelove Ralph Davis Salem Clyde Landreth Clyde Landreth Lynchburg Tim Karnes John Dearling Richmond Doug Chappell Anthony Sanchez Hampton Roads Jamie Collins Bill Jenkins Fredericksburg Ron Jackson Michael Whanger Culpeper David Routt David Routt Staunton Pat Hydrick Pat Hydrick Northern Virginia Ronnie Seale Ronnie Seale 18
19 Help Online Manual Printable Manual (in PDF format) Contact: HMA Angela Beyke CMA Wansoo Kim Franklin Stead Developer 19
20 Summary Via web portal the MITS enables: producer s tests for acceptance submitting/approving of Job Mix Formula sharing of data and reports MITS MITS Communicating PLAID Internal VDOT users QA tech Sr Lab tech/ Lab tech DME (DME designee) Administrator Producer users Sr lab tech/ Lab tech Administrator External
21 Questions? 21
What Does the Future Hold? State / Federal / Regional Contracts
Old Dominion University Civil and Environmental Engineering Visitors Council Society of American Military Engineers What Does the Future Hold? State / Federal / Regional Contracts November 18, 2010 Adam
Report on the Use of High RAP Asphalt Concrete Mixes for the 2007 Lynchburg District Plant Mix Contracts
Report on the Use of High RAP Asphalt Concrete Mixes for the 2007 Lynchburg District Plant Mix Contracts By Robert A. Reid, P.E. Virginia Department of Transportation Lynchburg District Materials Section
Regional Engineers. Jack A. Elston
Regional Engineers Jack A. Elston Special Provision for Hot-Mix Asphalt Pay for Performance Using Percent Within Limits Jobsite Sampling April 20, 2018 This special provision was developed by the Bureau
Alternative Project Delivery Division Consultant Procurement
Alternative Project Delivery Division Consultant Procurement VTCA/VDOT Consultant Forum 2016 September 8, 2016 Jeff Rodgers Director of Consultant Procurement Alternative Project Delivery Division Merged
Urban. Initiative. Meeting. Construction. Annual. City of Lynchburg
2014 Urban Construction Initiative Annual Meeting City of Lynchburg Materials Testing Requirements for Locally Administered Projects Don French, P.E. VDOT Lynchburg District District Materials Engineer
VIRGINIA DEPARTMENT OF TRANSPORTATION MATERIALS DIVISION MEMORANDUM. Charles A. Babish, PE State Materials Engineer Approved:
VIRGINIA DEPARTMENT OF TRANSPORTATION MATERIALS DIVISION MEMORANDUM GENERAL SUBJECT: Revisions to Chapter VII of Manual of Instructions Materials Acceptance and Materials Notebook Program NUMBER: MD 407-17
DIVISION II MATERIALS
DIVISION II MATERIALS SPECIAL PROVISION COPIED NOTES (SPCNs), SPECIAL PROVISION (SPs) and SUPPLEMENTAL SPECIFICATIONS (SSs) VDOT web file users ( pdf ) may obtain more information and other resources by
APPENDIX D ANSWERS TO STUDY QUESTIONS/PROBLEMS
APPENDIX D ANSWERS TO STUDY QUESTIONS/PROBLEMS Chapter 2 Quality Assurance Program Questions 1. What determines the lot size for a specified material accepted under the Statistical QA Program? B. The discretion
CHAPTER 5 BLENDING AGGREGATES
CHAPTER 5 BLENDING AGGREGATES A good asphalt concrete pavement requires more than asphalt, aggregates and equipment. It also requires knowledge, skill, and workmanship. Part of this knowledge and skill
Asphalt Technology Division
Chandra Akisetty, Division Chief 443-572-5051 Rebeccah Smith, Assistant Division Chief Field Operations 443-572-5112 Robert Voelkel, Assistant Division Chief Laboratory 443-572-5113 Asphalt Additives Anti-Strip
Roughness on Virginia s Roads Annual Roughness Report
Roughness on Virginia s Roads 2003 Annual Roughness Report Prepared by: Robert A. Reid, E.I.T. Senior Pavement Evaluation Engineer And Trenton M. Clark, P.E. Pavement Program Engineer Materials Division
CHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION During the early 1960s, the Virginia Department of Transportation undertook a program to upgrade aggregate materials. The Department felt this was necessary since the highway construction
SUPERPAVE. SUperior PERforming Asphalt PAVEments. History of Hveem Mix Design
SUPERPAVE SUperior PERforming Asphalt PAVEments History of Hveem Mix Design Hveem mix design was created by Francis Hveem in the 1920 s Basic premise of the design methodology is to coat each aggregate
Barry Paye, PE Wisconsin DOT WAPA Annual Conference
Barry Paye, PE Wisconsin DOT WAPA Annual Conference Why are our pavements turning grey so quickly? Our pavements don t seem to last as long as they used to. How come our pavements crack so quickly? Is
Price Adjustments User Manual
Price Adjustments User Manual Prepared By, Cassandra Asvestas TABLE OF CONTENTS ACCESSING PRICE ADJUSTMENT SPREADSHEETS 1 PRICE ADJUSTMENT PROCESS FOR HOT MIX ASPHALT(HMA) 2-3 Info Sheet 2 Sample Excel
research report Performance of Virginia s Warm-Mix Asphalt Trial Sections Virginia Transportation Research Council Final Report VTRC 10-R17
Final Report VTRC 10-R17 Virginia Transportation Research Council research report Performance of Virginia s Warm-Mix Asphalt Trial Sections http:/www.virginiadot.org/vtrc/main/online_reports/pdf/10-r17.pdf
FINAL REPORT MAUPIN,. JR, Principal. Research. Scientist NS PORTATIONRESEARCH :COUNCIL VIRGINIA TRANSPORTATION RESEARCH COUNCIL
FINAL REPORT JR, MAUPIN,. Scientist Research. Principal NS PORTATIONRESEARCH :COUNCIL VIRGINIA TRANSPORTATION RESEARCH COUNCIL Report No. Report Date W. Maupin, Jr. G. Organization Name and Address: Performing
Evolution of TxDOT s Quality Assurance Programs
Evolution of TxDOT s Quality Assurance Programs Design-Bid-Build, Design-Build, and Concession Projects 2009 AASHTO Subcommittee on Materials Meeting Anchorage, Alaska J. Jeffrey Seiders, Jr., P.E. Director,
Apparent Bids for Letting of May 24, 2017
Apparent Bids for Letting of May 24, 2017 Letting ID: 170524 Cut-Off Time: 10:00:59 AM 118 - CM117SS110746 BLAND, GRAYSON, SMYTH, WASHINGTON 2017 SLURRY SEAL (VOLUME 1 OF 2) $1,598,654.17 SLURRY PAVERS,
Construction Documentation Track B LAP Advanced Thursday, September 25,2013 3:00 PM- 4:30 PM
Construction Documentation Track B LAP Advanced Thursday, September 25,2013 3:00 PM- 4:30 PM Construction Management Plan/Materials Notebook September 25, 2013 Marty R. Halloway, P.E. VDOT Area Construction
Interstate 66 Widening from. RFQ Information Meeting. January 4, 2012 Christiana Briganti-Dunn, P.E. District Project Manager
Interstate 66 Widening from Gainesville to Haymarket RFQ Information Meeting January 4, 2012 Christiana Briganti-Dunn, P.E. District Project Manager John C. Daoulas, P.E. APD Project Manager and POC Introduction
Superpave Design Guidelines for Using Hot-Mix Recycled Asphalt Pavement and Recycled Asphalt Shingles
APPENDIX H Superpave Design Guidelines for Using Hot-Mix Recycled Asphalt Pavement and Recycled Asphalt Shingles Recycling Hot-Mix Asphalt and Recycling Manufacturer Waste Asphalt Roofing Shingles General
KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007
Sheet 1 of 6 KANSAS DEPARTMENT OF TRANSPORTATION SPECIAL PROVISION TO THE STANDARD SPECIFICATIONS, EDITION 2007 Delete SECTION 2501 and replace with the following: SECTION 2501 PART V 2501.1 GENERAL In
Establishing Hot Mix Asphalt Mixing and Compaction Temperatures at the Project Level
3 30 2 20 1 ot mix asphalt (HMA) mixing and compaction temperatures are emerging as critical issues in current asphalt pavement technology. Other factors, however, such as the total compaction process,
Design-Builder Quality Control System Paul Moyer, P.E., Gill Engineering. July 17, 2011
Design-Builder Quality Control System Paul Moyer, P.E., Gill Engineering July 17, 2011 Project Quality Assurance Program Quality Assurance All those planned and systematic actions necessary to provide
MEMORANDUM. Attached is a copy ofthe above Supplemental Technical Specification.
South Carolina Department of Transportation TO: FROM: MEMORANDUM Rick Werts, Director oftraffic Engineering Jim Feda, Director of Maintenance Milt Fletcher, Materials and Research Engineer ve'cfwin Eargle,
Bituminous Percent Within Tolerance (PWT)
Bituminous Percent Within Tolerance (PWT) March 30 April 1, 2015 What Does PWT Drive? Strict adherence to producing the job mix formula Strict adherence to field density spec. requirements Advantages of
Townline Road Middle Village Road then south 4800 feet.
05/10/2017 Townline Road Middle Village Road then south 4800 feet. Project: Project Stations: 0.91 miles of asphalt wedging and 2 inch HMA Paving, gravel 0+00 P.O.B. Middle Village Road shoulders, and
Asphalt Test Relationships The Devil s In The Details
Asphalt Test Relationships The Devil s In The Details Jayson Jordan, PE Technical Director jjordan@scasphalt.org ACKNOWLEDGEMENT & DISCLAIMER: Rocky Mountain Asphalt Education Center First Things First
MEMORANDUM DEPARTMENT OF ENVIRONMENTAL QUALITY. Guidance Memo No Chain of Custody Policy and Procedures
MEMORANDUM DEPARTMENT OF ENVIRONMENTAL QUALITY SUBJECT: TO: FROM: Guidance Memo No. 00-2016 s Regional Directors John M. Daniel, Jr. Air Program Coordin ion Director Larry G. Lawson, P.E. Water Program
MINNESOTA DEPARTMENT OF TRANSPORTATION OFFICE OF MATERIALS ENGINEERING
Mn/DOT SD-15 (Rev. 2-2001) MINNESOTA DEPARTMENT OF TRANSPORTATION OFFICE OF MATERIALS ENGINEERING Federal Aid, State Funds, County and Municipal Federal Aid Projects This schedule outlines the minimum
VDOT MECHANSTIC EMPIRICAL PAVEMENT DESIGN (MEPDG) IMPLEMENTATION
VDOT MECHANSTIC EMPIRICAL PAVEMENT DESIGN (MEPDG) IMPLEMENTATION 2018 Virginia Concrete Conference Richmond, Virginia Girum Merine, PE Senior Pavement Engineer, VDOT Material Division March 2, 2018 Presentation
IDOT HMA Update 2014
IDOT HMA Update 2014 Matthew Mueller, P.E. Bureau of Materials and Physical Research Illinois Department of Transportation Illinois Asphalt Paving Association Eliminate N105 Binder and Surface - IN PROGRESS
Energy Efficiency Classification for Fans. Boring presentation on a hot issue by John Cermak ACME Engineering and Manufacturing Corp.
Energy Efficiency Classification for Fans Boring presentation on a hot issue by John Cermak ACME Engineering and Manufacturing Corp. 1 HISTORY 2 Why Classification Regulatory and legislative bodies are
FAA s Mixture Specifications
FAA s Mixture Specifications - Revised P-401 (and P-403) - New P-601 (Fuel Resistant Mix) For SEAUPG, Nov 2014 By Mark Buncher 1 Univ. of KY. 2012 National Champs! F-18 Shockwave at Mach-1 Back to Airfield
ginia View Curriculum
Virg ginia View Curriculum Lesson Plan Grade Level Applicable Virginia SOL Summary Classroom Materials Submitted by Virginia s Water Resources: Aquifers Elementary, Grade 4 Science 4.8a, Virginia Studies
2016 ACHD Supplemental Specifications to the ISPWC. ACHD QC-QA Procedure
SECTION 100 General Conditions Add the following: 2016 ACHD Supplemental Specifications to the ISPWC Ada County Highway District Quality Control and Quality Assurance Procedure Definitions Quality Assurance
SAN FRANCISCO PUBLIC UTILITIES COMMISSION INFRASTRUCTURE CONSTRUCTION MANAGEMENT PROCEDURES
SAN FRANCISCO PUBLIC UTILITIES COMMISSION INFRASTRUCTURE CONSTRUCTION MANAGEMENT PROCEDURES SECTION: SFPUC INFRASTRUCTURE CONSTRUCTION MANAGEMENT PROCEDURE NO: 032 TITLE: SQS PLAN AND SURVEILLANCE PROCESS
Warm Mix Asphalt (WMA) Guide Specification for Highway Construction
Warm Mix Asphalt (WMA) Guide Specification for Highway Construction Division 400 - Asphalt Pavements and Surface Treatments SECTION 4XX - WARM MIX ASPHALT (WMA) PAVEMENT Warm mix asphalt (WMA) is the generic
HB2 Implementation Policy Guide
report HB2 Implementation Policy Guide prepared for Commonwealth Transportation Board date March 18, 2015 Table of Contents 1.0 Introduction... 9 1.1 HB2 Legislation Requirements... 10 House Bill 1887...
VDOT Hi-Polymer Asphalt Field Perspective. Virginia Asphalt Association Fall Conference Richmond, VA
VDOT Hi-Polymer Asphalt Field Perspective Virginia Asphalt Association Fall Conference Richmond, VA October 4, 2015 David P. Shiells, P.E. District Materials Engineer Hi-Polymer Applications in NoVa Subdivision
LOCATION AND DESIGN DIVISION
VIRGINIA DEPARTMENT OF TRANSPORTATION LOCATION AND DESIGN DIVISION INSTRUCTIONAL AND INFORMATIONAL MEMORANDUM GENERAL SUBJECT: Title Sheets NUMBER: SPECIFIC SUBJECT: Plan Notes and Approval Signatures
Pilot Asphalt Specification Review Technician Duties. November 20 th, 2015 Chris Abadie Materials Engineer Administrator District 61 Conference Room
Pilot Asphalt Specification Review Technician Duties November 20 th, 2015 Chris Abadie Materials Engineer Administrator District 61 Conference Room Roadway Sampling Specification Mainline Roadway lot is
Update FHWA Asphalt Program. John Bukowski Asphalt Team Leader Office of Pavement Technology
Update FHWA Asphalt Program John Bukowski Asphalt Team Leader Office of Pavement Technology 1 Program Focus Areas Pavement Design and Analysis Materials and Construction Technology Pavement Management
SECTION AGGREGATES
SECTION 32 05 00 AGGREGATES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Aggregate base 2. Engineered fill 3. Backfill 4. Fine filter aggregate (non-frost susceptible fill) 5. Riprap 6. Recreational
Designing HMA Mixtures with High RAP Content
Quality Improvement Series 124 Designing HMA Mixtures with High RAP Content A Practical Guide This publication is provided by the Members of the National Asphalt Pavement Association (NAPA), who are the
Mix Blending Enhancement System ASTEC INTELLI-PAC. Mix Blending Enhancement System 1
Mix Blending Enhancement System ASTEC INTELLI-PAC Mix Blending Enhancement System 1 ASTEC INTELLI-PAC Mix Blending Enhancement System The ASTEC Intelli-Pac mix blending enhancement system gathers real-time
Double covered. ODOT tests enhanced chip seal on S.R. 20. chip seal constructed on an. existing flushed roadway has the
PAVEMENT MAINTENANCE By Mark Russell, P.E., Kevin Littleton, P.E., and Jeff Uhlmeyer, P.E. Contributing Authors Double covered ODOT tests enhanced chip seal on S.R. 20 A chip seal constructed on an existing
INDOT/ACPA Technical Committee 2009 Specification Revisions 2009 Test Method Revisions Studies
PCCP Workshop INDOT INDOT/ACPA Technical Committee 2009 Specification Revisions 2009 Test Method Revisions Studies INDOT/ACPA Technical Committee Materials Management FHWA Construction Management District
Quality Assurance Policies and Procedures. Residential Existing Homes
Quality Assurance Policies and Procedures Residential Existing Homes As a public benefit corporation, NYSERDA strives to deliver the most effective residential energy efficiency Programs possible and to
Pay Schedule for Ride Quality
Pay Schedule for Ride Quality 2007 Design & Bridge Conference Dale A. Rand, P.E. TxDOT Const. Div. Ride Specification International Roughness Index (IRI) is the International Roughness Index and measures
Reclaimed Asphalt Pavement
Reclaimed Asphalt Pavement Roy Guevara CDOT Asphalt Pavement Program Rocky Mountain Asphalt Conference February 2010 Benefits of Using RAP Benefits of Using RAP Conservation of materials Benefits of Using
CHAPTER VII - MATERIALS ACCEPTANCE AND MATERIALS NOTEBOOK PROGRAM... VII-2
CHAPTER VII - MATERIALS ACCEPTANCE AND MATERIALS NOTEBOOK PROGRAM... VII-2 SECTION 701 MATERIALS NOTEBOOK PROGRAM OVERVIEW/PURPOSE... VII-2 SECTION 702 RESPONSIBILITIES FOR KEEPING MATERIALS NOTEBOOKS,
SUPERPAVE FACT SHEET
WASHINGTON STATE DEPARTMENT OF TRANSPORTATION December 2003 SUPERPAVE FACT SHEET stands for SUperior PERforming asphalt PAVEment and is the result of a Strategic Highway Research Program (SHRP) initiative
Extraction and Sieve Analysis ( µm minus) Forming Marshall Specimens, Field Method
3.56 COLD IN-PLACE RECYCLING 3.56.1 GENERAL This specification covers the requirements for Cold In-Place Recycling (CIR) which consists of reclaiming the existing asphalt pavement; sizing the reclaimed
ASPHALT BINDER QUALITY PROGRAM
Test Procedure for ASPHALT BINDER QUALITY PROGRAM TxDOT Designation: Tex-545-C Effective Date: February 2017 1. SCOPE 1.1 The Asphalt Binder Quality Program (ABQP) provides the requirements and procedures
ADOT s Use of RAP in Asphaltic Concrete
ADOT s Use of RAP in Asphaltic Concrete Updated & Presented by: Nye McCarty, P.E. Originally prepared by: Chad Auker & Scott Weinland ADOT Construction-Materials Group Overview ADOT s Existing RAP Specification
SELECTIVE FLEXIBLE PAVEMENT REHABILITATION BASED ON FORENSIC INVESTIGATION AND DEFLECTION ANALYSIS: SEVENTEEN YEARS CASE STUDY IN VIRGINIA
0 0 0 0 SELECTIVE FLEXIBLE PAVEMENT REHABILITATION BASED ON FORENSIC INVESTIGATION AND DEFLECTION ANALYSIS: SEVENTEEN YEARS CASE STUDY IN VIRGINIA Mohamed Elfino, Ph.D., P.E. * Assistant State Materials
The Cardiac Arrest of Hot Mix Asphalt Pavements
The Cardiac Arrest of Hot Mix Asphalt Pavements Timothy R. Murphy, P.E. President What Are You Really Going To Remember from this Convention? What will you really remember most about today? 70% of what
3/28/2016 APWA-WA CONSTRUCTION MATERIALS COMMITTEE. SPEAKERS: Cody R. Hart, P.E. Jessica Knickerbocker, P.E.
APWA-WA CONSTRUCTION MATERIALS COMMITTEE SPEAKERS: Cody R. Hart, P.E. Jessica Knickerbocker, P.E. 1 Committee Organization The Construction Materials Subcommittee for APWA-WA has two cochairs. Cody R.
Nova Scotia 2009 Pavement Preservation. Jim Chisholm Highway Construction Services
Nova Scotia 2009 Pavement Preservation Jim Chisholm Highway Construction Services 2009 Construction Overview Pavement Preservation Hot Mix Asphalt Overlays Cold in Place Recycling Pulverization/Graveling/HMA
Overview. Mix Design with High RAP Contents SEAUPG 2010 ANNUAL CONFERENCE OKLAHOMA CITY, OK. December 7, 2010
Overview High RAP Content Mix Design Southeast Asphalt User Producer Group OKC, Status of NCHRP 9 46 Preliminary Recommendations High RAP Mixes on the NCAT Test Track Mix Design with High RAP Contents
Quality Assurance The Rest of the Story
Quality Assurance The Rest of the Story Dennis Dvorak FHWA Resource Center Olympia Fields, IL North Central Asphalt User Producer Group Meeting January 10-11, 2007 AASHTO Road Test Payment Plan with 5%
Page 1 / 11. Version 0 June 2014
Page 1 / 11 CORRESPONDENCE MATRIX NQSA NSQ-100 version 0 NUCLEAR SAFETY AND QUALITY MANAGEMENT SYSTEM REQUIREMENTS Model for quality management in design & development, manufacturing, erection, commissioning
The Cardiac Arrest of Hot Mix Asphalt Pavements. Timothy R. Murphy, P.E., M. ASCE President
The Cardiac Arrest of Hot Mix Asphalt Pavements Timothy R. Murphy, P.E., M. ASCE President Our Job is to Evaluate Risk LCCA Durability Process Control Rugged review of practices with numerous agencies
ASPHALT WAQTC WAQTC TM 13 (12)
Volumetric Properties of Hot Mix Asphalt (HMA) WAQTC TM 13 Scope This procedure covers the determination of volumetric properties of plant produced Hot Mix Asphalt, i.e., air voids (V a ), voids in mineral
INS QA Programme Requirements
Specification Date: 20/3/17 INS QA Programme Requirements UNCONTROLLED WHEN PRINTED Author: J Cooch AUTHORISATION Date: 20/3/17 A Brown Owner: J Cooch (Signature) N.B. only required for hard copy If issued
OKLAHOMA DEPARTMENT OF TRANSPORTATION LABORATORY QUALIFICATION POLICY
Revised June 5, 2017 OKLAHOMA DEPARTMENT OF TRANSPORTATION LABORATORY QUALIFICATION POLICY SCOPE: This policy defines the process a lab shall follow to become qualified to conduct acceptance and QC/QA
Asphalt Guidelines. Courtney Rousseau, P.E. Lloyd Consulting Group, LLC
Asphalt Guidelines Courtney Rousseau, P.E. Lloyd Consulting Group, LLC Objectives Review typical asphalt sections and other key components to ensure optimal material usage for your project Review hot mix
This procedure covers evaluating and analyzing supplier for addition to the Approved Supplier List (ASL) and performance evaluation.
1.0 Scope and Purpose This procedure covers evaluating and analyzing supplier for addition to the Approved Supplier List (ASL) and performance evaluation. This procedure covers all purchased items obtained
ITEM 302 AGGREGATES FOR SURFACE TREATMENTS
ITEM 302 AGGREGATES FOR SURFACE TREATMENTS 302.1. Description. This Item shall govern for aggregates and precoated aggregates used in the construction of surface treatments. 302.2. Materials. (1) Aggregates.
& EXPO ASPHALT ON-SITE PROGRAM. Quality and Innovation CONFERENCE. October 3-5, Virginia asphalt association 2016 FALL
Virginia asphalt association 2016 FALL ASPHALT CONFERENCE & EXPO Quality and Innovation ON-SITE PROGRAM October 3-5, 2016 Richmond Marriott Downtown vaasphalt.org/vaa-conferences Quality and Innovation
Special Provision No. 305S02 January 2016
GRANULAR SEALING - Item No. Special Provision No. 305S02 January 2016 Amendment to OPSS 305, March 1998 OPSS 305, March 1998, Construction Specification for Granular Sealing is deleted in its entirety
PAVEMENT CONSTRUCTION QA PROCEDURES RIDEABILITY TESTING CONSTRUCTION PRACTICE
PAVEMENT CONSTRUCTION QA PROCEDURES RIDEABILITY TESTING CONSTRUCTION PRACTICE Quality Assurance is not Quality Control Quality control is Contractors responsibility during construction. Quality Assurance
Yesterday. Today. Tomorrow
Materials 106 Introduction to Warm Mix Asphalt Yesterday Today Tomorrow Rocky Mountain Asphalt Conference & Equipment Show February 19 February 21, 2014 Materials 106 Introduction to Warm Mix Asphalt Yesterday
Aircraft Maintenance. Compliance, Quality and SMS. Federal Aviation Administration. By: Tim Shaver, Manager (Acting)
Aircraft Maintenance Compliance, Quality and SMS By: Tim Shaver, Manager (Acting) Aircraft Maintenance Division, AFS-300 To: Regulatory Panel Date: November 4, 2015 The Division Rulemaking Activity Policy
Quality Agreements with CMO s. Presented at ASQ Orange Empire Meeting May 13, 2014 By Luke Foo Sr. Director QA/QC Spectrum Pharmaceuticals
Quality Agreements with CMO s Presented at ASQ Orange Empire Meeting May 13, 2014 By Luke Foo Sr. Director QA/QC Spectrum Pharmaceuticals FDA Guidance Contract Manufacturing Arrangements for Drugs: Quality
FHWA Mobile Concrete Lab Program. Illinois Tollway Open House: Sustainable Concrete Paving Practices August 20, 2013
FHWA Mobile Concrete Lab Program Illinois Tollway Open House: Sustainable Concrete Paving Practices August 20, 2013 Mission Tech Transfer to SHA s Field demos on active projects Equipment loan Training
Recommended Practices for Crack Sealing HMA Pavement
2008-54 Recommended Practices for Crack Sealing HMA Pavement Take the steps... Research...Knowledge...Innovative Solutions! Transportation Research Technical Report Documentation Page 1. Report No. 2.
SHRP2 R07 Targeted Assistance Program Furthering the Use of Performance Specifications Brad Neitzke
SHRP2 R07 Targeted Assistance Program Furthering the Use of Performance Specifications Brad Neitzke WFLHD Materials Engineer and FLH Materials Discipline Champion September 20, 2016 Project Partnership
Foreword... iii Table of Contents...v List of Figures...vii List of Tables...viii. Chapter 1 : Background...1
Foreword... iii Table of Contents...v List of Figures...vii List of Tables...viii Chapter 1 : Background...1 Introduction...1 Asphalt Mixtures... 2 Asphalt Binder Behavior... 2 Mineral Aggregate Behavior...
Chapter 1: The 2035 Virginia Surface Transportation Plan 1. Challenges & Opportunities 2 VTrans2035: The Precursor 2 The VSTP and VTrans2035 2
November 2010 Table of Contents Executive Summary See Summary Map Chapter 1: The 2035 Virginia Surface Transportation Plan 1 Challenges & Opportunities 2 VTrans2035: The Precursor 2 The VSTP and VTrans2035
DEVELOPMENT OF CRITICAL FIELD PERMEABILITY AND PAVEMENT DENSITY VALUES FOR COARSE-GRADED SUPERPAVE PAVEMENTS
NCAT Report 1-3 DEVELOPMENT OF CRITICAL FIELD PERMEABILITY AND PAVEMENT DENSITY VALUES FOR COARSE-GRADED SUPERPAVE PAVEMENTS By L. Allen Cooley Jr. E. Ray Brown Saeed Maghsoodloo September 21 277 Technology
Warm Mix Asphalt Evaluation Protocol. Brian D. Prowell, P.E. Graham C. Hurley
Warm Mix Asphalt Evaluation Protocol Brian D. Prowell, P.E. Graham C. Hurley Why Warm Asphalt? Reduce production and laydown temperatures Reduce emissions Reduce energy costs Reduce aging of binder Other
ALTERNATIVE PROJECT DELIVERY DIVISION
VIRGINIA DEPARTMENT OF TRANSPORTATION ALTERNATIVE PROJECT DELIVERY DIVISION INSTRUCTIONAL AND INFORMATIONAL MEMORANDUM GENERAL SUBJECT: Design-Build Requirements for Advertisement SPECIFIC SUBJECT: APPROVED:
DISADVANTAGED BUSINESS ENTERPRISE PROGRAM (49 CFR PART 26) FOR FREDERICKSBURG REGIONAL TRANSIT POLICY STATEMENT
DISADVANTAGED BUSINESS ENTERPRISE PROGRAM (49 CFR PART 26) FOR FREDERICKSBURG REGIONAL TRANSIT POLICY STATEMENT Section 26.1, 26.23 Objectives/Policy Statement FREDericksburg Regional Transit (FRED), a
Special Provision for Hot-Mix Asphalt Prime Coat
All Regional Engineers Omer M. Osman, P.E. Special Provision for Hot-Mix Asphalt Prime Coat July 25, 2014 This special provision was developed by the Bureau of Materials and Physical Research to improve
Idaho Transportation Department (ITD) Mohamed Zubery. Vince Spisak FHWA. By: Fouad Bayomy, PhD, PE. Department of Civil Engineering
Acknowledgement: A Simple Fracture Test For HMA By: Fouad Bayomy, PhD, PE University it of Idaho Department of Civil Engineering 47 th Idaho Asphalt Conference October 25 th, 2007 Idaho Transportation
12/11/ % 27% Crushed Concrete Course FRAP Fine RAP 26% 27% Steel Slag Shingle - RAS
12/11/2013 December 11th 2013 Abdul Z. Dahhan, P.E. Bureau Chief of Materials Region One Illinois Department of Transportation Terry Papp Jr 15% 5% Plant & Laboratory Manager East Operations 27% D Construction,
Use of Asphalt Pavement Analyzer Testing for Evaluating Premium Surfacing Asphalt Mixtures for Urban Roadways
Use of Asphalt Pavement Analyzer Testing for Evaluating Premium Surfacing Asphalt Mixtures for Urban Roadways Arthur G. Johnston, C.E.T., Principal Consultant, EBA Engineering Consultants Ltd., Calgary,
MPC REPORT NO Evaluating the Impace of QC/QA Programs on Asphalt Mixture Variability
MPC REPORT NO. 03-146 Evaluating the Impace of QC/QA Programs on Asphalt Mixture Variability Khaled Ksaibati Nathan Butts June 2003 Evaluating the Impact of QC/QA Programs on Asphalt Mixture Variability
HB2 Implementation Policy Guide
report HB2 Implementation Policy Guide prepared for Commonwealth Transportation Board date August 1, 2015 Table of Contents 1.0 Introduction... 1 1.1 HB2 Legislation Requirements... 1 1.2 Roles and Responsibilities...
TxDOT s Programmatic Quality Assurance Program for Design-Build Projects and Implementation Guide
TxDOT s Programmatic Quality Assurance Program for Design-Build Projects and Implementation Guide Darren Hazlett darren.hazlett@txdot.gov J. Jeffrey Seiders, Jr. PE jseiders@rkci.com 2015 WASHTO Subcommittee
Florida Department of TRANSPORTATION Materials Acceptance and Certification (MAC) System
Materials Acceptance and Certification (MAC) System FTBA 2/11/2014 Presented By David Davis, Susan Blazo 1 The 5 W s Business Perspective Who will be affected by MAC Asphalt Production Facility QC Managers
ATT-36/95, VOID CALCULATIONS
ATT-6 1.0 Scope ATT-6/95, VOID CALCULATIONS 1.0 SCOPE This method describes the procedure for using the voids table and data sheets to determine the percent air voids, the percent voids filled with asphalt
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENT 1069 PRE-QUALIFIED AGGREGATE SUPPLIER PROGRAM. April 18, 2008
STATE OF OHIO DEPARTMENT OF TRANSPORTATION SUPPLEMENT 1069 PRE-QUALIFIED AGGREGATE SUPPLIER PROGRAM April 18, 2008 1069.01 Description 1069.02 Definitions 1069.03 General Pre-qualification Requirements
ITER Quality Assurance
US ITER Central Solenoid Vendor Meeting ITER Quality Assurance by John Mashburn USIPO QA Manager 1 QA Topics ITER s Nuclear License Graded Approach Proposal QA Items Quality Plan Specific to Contract Manufacturing
ROUTE 3 WIDENING DESIGN-BUILD PROJECT. ROUTE 3 BUILDERS A Joint Venture ORIGINAL STATEMENT OF QUALIFICATIONS
STATEMENT OF QUALIFICATIONS ROUTE 3 WIDENING DESIGN-BUILD PROJECT From: 4.1 Miles East Rte. 29 To: 4.0 Miles West of Culpeper / Orange County Line January 25, 2013 State Project No.: 0003-023-107, P101,
SECTION 402 PLANT MIX BITUMINOUS SURFACE LEVELING
SECTION 402 PLANT MIX BITUMINOUS SURFACE LEVELING 402.1 Description. This work shall consist of placing, spreading and compacting a bituminous mixture as shown on the plans or as directed by the engineer.