Versoleil TM SunShade - Outrigger System
|
|
|
- Gerard Welch
- 6 years ago
- Views:
Transcription
1 AUGUST, 2017 FEATURES - STOREFRONT 1 Outrigger Blade Fascia Features Standard designs Screw Spline assembly Used with TRIFAB TM VG 451/451T Shear Block - 2" vertical mullion, center glazed Used with TRIFAB TM VG 451/451T/451UT/601/601T/601UT Screw Spline - 2-1/4" vertical mullion, center glazed Helps reduce building energy consumption Permanodic TM anodized finishes in seven standard choices Painted finishes in standard and custom choices Shading performance can be analyzed by Solector TM Sun Shading Estimator Tool For specific product applications, Consult your Kawneer representative.
2 2 BLANK PAGE AUGUST, 2017
3 AUGUST, 2017 INDEX - STOREFRONT 3 Architects - Most extrusions illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. TRIFAB TM VG 451/451T FRAMING - Shear Block Assembly...4 TRIFAB TM VG 451/451T/451UT FRAMING - Screw Spline Assembly...5 TRIFAB TM 601/601T/601UT FRAMING - Screw Spline Assembly...6 SUNSHADE COMBINATIONS...7, 8 DESIGN GUIDELINES...9 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m meter cm centimeter mm millimeter s second Pa pascal MPa megapascal
4 4 TRIFAB TM VG 451/451T FRAMING - SHEAR BLOCK ASSEMBLY AUGUST, 2017 NOTE: For standard storefront applications the outrigger is limited to 30". Details shown with 30" square outrigger, arch blade and rectangular fascia. HEAD ANCHOR FOR SHEAR BLOCK 30" NOTE: Horizontal SunShades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. TRIFAB TM VG 451T (TF VG 451 SIMILAR) 451T 451 HEAD ANCHOR FOR SHEAR BLOCK FRAMING
5 AUGUST, 2017 TRIFAB TM VG 451/451T/451UT FRAMING - SCREW SPLINE ASSEMBLY 5 NOTE: For standard storefront applications the outrigger is limited to 30". Details shown with 30" square outrigger, arch blade and rectangular fascia. HEAD ANCHOR FOR SCREW SPLINE 30" 36" MAXIMUM ADJUSTMENT C L NOTE: Horizontal SunShades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. TRIFAB TM VG 451T (TF VG 451 & 451UT SIMILAR) 451T UT HEAD ANCHOR FOR SCREW SPLINE FRAMING
6 6 TRIFAB TM 601/601T/601UT FRAMING - SCREW SPLINE ASSEMBLY AUGUST, 2017 NOTE: For standard storefront applications the outrigger is limited to 30". Details shown with 30" square outrigger, arch blade and rectangular fascia. HEAD ANCHOR FOR SCREW SPLINE 30" 36" MAXIMUM ADJUSTMENT C L NOTE: Horizontal SunShades are not recommended directly over entrances and walkways to eliminate any risk of injury due to falling ice or snow. TRIFAB TM 601T (TF 601 & 601UT SIMILAR) 601T UT HEAD ANCHOR FOR SCREW SPLINE FRAMING
7 AUGUST, 2017 OUTRIGGER / FASCIA / BLADE COMBINATIONS - STOREFRONT 7 STANDARD OUTRIGGERS STANDARD FASCIAS STANDARD BLADES 30" SQUARE RECTANGULAR INFINITY FLARE ARCH CIRCULAR 30" ROUNDED BULLNOSE AIRFOIL DIAMOND PLANAR SQUARE WAVE 30" WEDGE ANGULAR CIRCULAR 30" CURVED CIRCULAR CIRCULAR SQUARE DIAMOND
8 8 OUTRIGGER / FASCIA / BLADE COMBINATIONS - STOREFRONT AUGUST, 2017 INFINITY ARCH AIRFOIL 30" SQUARE OUTRIGGER 30" ROUNDED OUTRIGGER PLANAR WAVE FLARE CIRCULAR DIAMOND SQUARE INFINITY ARCH AIRFOIL PLANAR WAVE FLARE CIRCULAR DIAMOND SQUARE DIAMOND 30" CURVED OUTRIGGER SQUARE 30" WEDGE OUTRIGGER CIRCULAR CIRCULAR
9 AUGUST, 2017 DESIGN GUIDELINES - STOREFRONT 9 PRODUCT NOTES: 1. Maximum outrigger projection for storefront framing should not exceed 30". 2. Anchors are painted only, and can be painted to match anodized finishes. Louvers and fascias can be painted or anodized. 3. Standard outriggers, louvers and fascias can be mixed and matched at the designers choosing. 4. Some modification or customization of standard components can be accomodated. Please contact your Kawneer Representative for assistance. 5. Due to the wide variety of building codes, load restrictions, and deflection criteria, the use of SunShades on storefront should be analyzed and approved by Kawneer Application Engineers on a project specific basis. 6. If Versoleil TM SunShade does not meet your aesthetic or performance needs, please contact your Kawneer Representative for assistance in designing a custom sunshade.
10 10 BLANK PAGE AUGUST, 2017
PG 123 TM Framing 1. Optional Features Optional vertical covers 1/4" (6.4) infill adaptors
JNURY, 0 E 99-0 PG TM Framing FETURES Features Structural silicone glazed - captured head and sill cans IsoWeb TM thermal barrier (glass reinforced nylon) " (.) infill system Dual finish capability Rain
Brise Soleil Fixed Sunshades
Brise Soleil Fixed Sunshades Introduction Linel is headquartered in Mooresville, Indiana and is part of the Mestek Architectural Group. In addition to Linel, Mestek s architectural activities include American
Custom fabrication in two weeks or less, guaranteed.
Custom fabrication in two weeks or less, guaranteed. Ask us how Ramco can now fabricate hardware on all manufacturers blank doors in 2 weeks or less. ramcometals.com got lead times? Ramco offers custom
SWING DOOR SPECIFICATION
SWING DOOR A1 Work included: Furnish all necessary materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified
TMS 114 XT TECHNICAL MANUAL
TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES is center set flush glazed systems that are 4 1/2" deep with a 2" wide sightline Glaze from the outside or inside Screw spline or shear block fabrication Glazing
Series 510-I Thermal Heavy Commercial Projected Window
Windows Curtain Walls Entrances Storefronts Series 510-I Thermal 2-7 16 Heavy Commercial Projected Window Configurations Project-In Project-Out Casement Fixed Series 510-I retains an AAMA Architectural
JULY, 2016 E.C
JULY, 06 E.. 979-0 Architects - These concepts have been expanded and modified to afford you design freedom. Please contact your Kawneer representative for further assistance. The extrusions and window
TMS 152 / 152T / 152XT TECHNICAL MANUAL
TMS 152 / 152T / 152XT TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES TMS 152 (non-thermal), 152T (single thermal barrier), and 152XT (double thermal barrier) are front set flush glazed systems that are
EFFECTIVE JULY, 2010 TRIFAB VG 451/451T 1 EC ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS Guide Specs
EFFECTIVE JULY, 2010 TRIFAB VG 451/451T 1 EC 97909-19 08 41 13 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS Guide Specs SECTION 084113 - ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 - GENERAL 1.1 RELATED
Series 660 Single Hung * Series 670 Double Hung Series 6600 Fixed ** Heavy Commercial Hung Thermal Window
E F C O C O R P O R A T I O N Visit us on the web at efcocorp.com IMPACT GRADE BLAST GRADE Series 660 Single Hung * Series 670 Double Hung Series 6600 Fixed ** 3 7 8 Heavy Commercial Hung Thermal Window
E-Wall System 5800, 5800-I
Windows Curtain Walls Entrances Storefronts E-Wall System 5800, 5800-I The beauty of EFCO s E-Wall Silicone Gasket curtain wall system is the simplicity in which it is installed. There are no internal
TR-700 Window Wall. Multifaceted Window System for Flexible Design
TR-700 Window Wall Multifaceted Window System for Flexible Design The Admiral at the Lake, Chicago, Illinois, USA Architect: Perkins + Will, Dallas, Texas, USA Window Installer: Softer Lite Window Company,
Series 3500 Thermal Series 3900 Fixed Thermal Architectural Grade Horizontal Sliding Window
Windows Curtain Walls Entrances Storefronts Series 3500 Thermal Series 3900 Fixed Thermal 3 1 4 rchitectural Grade Horizontal Sliding Window Configurations X X XX X XX Fixed Series 3500 retains an M rchitectural
SECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS PART 1 - GENERAL 1.01 SUMMARY A. Section includes: 1. Storefront systems and aluminum framed glass doors. 2. Hardware, fasteners, accessories, filler pieces, etc., required
GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM
1 GUIDE SPECIFICATION EXETER SECURITY SHIELD SECURITY WINDOW BARRIER SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials and services to furnish and install SECURITY
ALUMINUM (800) (866) BLAST MITIGATION. BR604/BR606/BT601 Storefront BR7500/BW7600/BW8000 BW8100/BW8200 Windows Accessory Hardware
BLAST MITIGATION BR60/BR606/BT601 Storefront BR700/BW7600/BW8000 BW8/BW800 Windows Accessory Hardware Toll ree Phone Service (800) 6-11 Toll ree ax Service (866) 6-99 U.S. and Canada usalum.com BLAST MITIGATION
A guide to Azon energy-saving technology. thermal barriers for high performance commercial fenestration
A guide to Azon energy-saving technology thermal barriers for high performance commercial fenestration DYNAMIC MIXER Azon 1 Azon 2 Azon structural thermal barrier technology How the pour and debridge process
TRIFAB FRAMING SYSTEMS AND STOREFRONT FRAMING SYSTEMS ALUMINUM STOREFRONT FRAMING SYSTEMS
ENVIRONMENTAL PRODUCT DECLARATION TRIFAB FRAMING SYSTEMS AND STOREFRONT FRAMING SYSTEMS ALUMINUM STOREFRONT FRAMING SYSTEMS Kawneer Company, Inc., part of Arconic's global Building and Construction Systems
SOLAR SHADING SYSTEMS - Manual Solar Shade SECTION ROLLER WINDOW SHADES
PART 1 - GENERAL SECTION 122413 - ROLLER WINDOW SHADES 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
Series Heavy Commercial Projected Window
Windows Curtain Walls Entrances Storefronts Series 510 2-7 16 Heavy Commercial Projected Window Configurations Project-In Project-Out Casement Pivot Top-Hinged Fixed Series 510 retains an AAMA Architectural
Project: North Charleston City Hall, North Charleston, SC
0- ALUINU Table of Contents STOR WALL Series IW50 SECTION PAGE SPECIFICATIONS...0- and 0- TECHNICAL DATA...04- SPECIAL FEATURES...05- TYPICAL DETAILS FOR 7/6" () GLAZING...06- TYPICAL DETAILS FOR -/6"
GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM
1 GUIDE SPECIFICATION EXETER VERSA SHIELD SECURITY SCREEN SYSTEM 1.01 WORK INCLUDED PART 1: GENERAL A. Provide for all labor, equipment, materials, and services to furnish and install VERSA SHIELD Window
TEST REPORT. Report No.: B Rendered to: TREMCO, INCORPORATED Beachwood, Ohio
Architectural Testing TEST REPORT Report No.: B2739.02-501-47 Rendered to: TREMCO, INCORPORATED Beachwood, Ohio PRODUCT TYPE: Air Barrier System SERIES/MODEL: ExoAir 230, ProGlaze ETA System 1, Spectrem
PW251 21/2 x7 GUIDE SPECIFICATION. Curtain Wall
Manufacturer: Coral Architectural Products 3010 Rice Mine Road Tuscaloosa, AL. 35406 Voice: (800) 772-7737 Fax: (800) 443-6261 SECTION 08900 ALUMINUM CURTAIN WALL This suggested guide specification has
SECTION A. AAMA/NWWDA Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors.
SECTION 08520 ALUMINUM WINDOWS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 07200 - Joint Sealers. 2. 08800 - Glass and Glazing. 1.02 REFERENCES A. AAMA/NWWDA 101-97 Voluntary Specifications for
Hybrid systems. a new concept in composite facade and window systems
HEAD OFFICE Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA. Tel: 01709 772 600. Fax: 01709 772 601. E-mail: info@seniorhybrid.co.uk BRANCHES Scotland; Unit
Walkway Covers and Canopies. Architectural & Engineering Catalog. Version 2.0
Walkway Covers and Canopies Architectural & Engineering Catalog Version 2.0 2310 Mercator Drive, Orlando, FL 32807 407. 671. 6225 / 800. 238.7207 Fax: (407) 671-8252 www.perfectionarch.com Table of Contents
AMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD. Maximum Bearing Bar Depth / 2 (63.5 mm)
METAL BAR GRATING AMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD MBG 531-17 GRATINGS 5 ANSI/NAAMM MBG 531-17 SEPTEMBER 7, 2017 METAL BAR GRATING MANUAL EIGHTH EDITION Maximum Bearing Bar Depth... 2 1 /
SECTION EXTERIOR GRILLS AND SCREENS
SECTION 10 82 13 PART 1 GENERAL PART 1 1 SUMMARY A. Section Includes: 1. Exterior perforated aluminum screen wall system with Ombrae TM Optical Tile imaging technology. 2. Accessories including attachments,
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION
Architectural Single-Hung Aluminum Window Series L701T SH-AW130 GUIDE SPECIFICATION Section 08520 Aluminum Windows PART 1: WORK INCLUDED A. The conditions of the contract and applicable sections of Division
Architectural Testing ASTM E283, ASTM E330, ASTM E331 TEST REPORT. Report Number: C Rendered to: Tubelite Inc.
Architectural Testing ASTM E283, ASTM E330, ASTM E331 TEST REPORT Report Number: C0271.01-450-44 Rendered to: Tubelite Inc. Walker, Michigan MODEL DESIGNATION: 400 Series Curtainwall with 4 Sided SSG PRODUCT
Blast Curtain Wall Installation Analysis
August 11, 2005 57402.01-122-34 JAR/STS 1 US Aluminum BR3250 Blast C.W. Blast Curtain Wall Installation Analysis Subject: BR3250 Blast Curtain Wall System ATI Report 57402.01-122-34 Rendered to: International
UNIFIED FACILITIES GUIDE SPECIFICATIONS ************************************************************************** SECTION TABLE OF CONTENTS
USACE / NAVFAC / AFCEC / NASA UFGS-09 06 00 (May 2009) Change 1-11/13 ----------------------------- Preparing Activity: USACE Superseding UFGS-09 06 90 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
A. Section includes extruded aluminum windows with operating sash, operating hardware, and insect screens.
SECTION 08 51 13 - Page 1 PART 1 GENERAL 1.1 SUMMARY A. Section includes extruded aluminum windows with operating sash, operating hardware, and insect screens. B. Related Sections: 1. Section 07 92 00
PROJECT LOCATION SECTION COPPER METAL PLATE WALL PANELS
SECTION 07 4213.25 PART 1- GENERAL 1.01 SECTION INCLUDES A. Copper metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support framing.
build for life Architectural Aluminium Systems Finishes and Facilities
build for life Architectural Aluminium Systems Finishes and Facilities KAWNEER ARCHITECTURAL ALUMINIUM SYSTEMS FINISHES AND FACILITIES Lovell House, Manchester Technopark Aedas Pendant Aluminium Ltd Architectural
DIVISION 8 OPENINGS SECTION ALUMINUM WINDOWS
DIVISION 8 OPENINGS SECTION 08 51 13 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
SECTION (08410) - ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS
SECTION 08 41 13 (08410) - ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Interior and Exterior Aluminum Storefront Framing, Doors, Door Frames, Lights, and
SECTION ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 - GENERAL 1.1 SUMMARY. A. Section Includes:
SECTION 084113 - ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Exterior storefront framing. 2. Storefront framing for ribbon walls. 3. Storefront framing
Architectural Systems for Building Facades. Leader and Expert in High Performance Curtain walls systems
Architectural s for Building Facades Leader and Expert in High Performance Curtain walls systems STEKAR CURTAIN WALLS SYSTEMS Definition: A SYSTEM IS A SET OF ELEMENTS THAT INTERACT WITH ONE ANOTHER ACCORDING
6 Drainable Louver. Update to Louvers Catalog C-1.0. Catalogue Page 2 Page 7. Page LP-13. Submittals Drawing
6 Drainable Louver Section Page Number Catalogue Page 2 Page 7 Performance Data Page LP-12 Page LP-13 Submittals Drawing 237947 Update to Louvers Catalog C-1.0 April 2010 Louvers General Product Overview
YES SSG TU Vent Window System
YES SSG TU VENT SYSTEM DESCRIPTION 3-1/2" Overall Depth Flat and Pocket Frame Options Variations: Casement Outswing Projected Outswing 1" Glazing Optional Screens YES SSG TU VENT PERFORMANCE FEATURES AAMA/WDMA/CSA
4-5/8" Offset Projected Architectural Thermal Aluminum Windows. Project In TR-740 (AW-PG80-AP) or Project Out TR-750 (AW-PG80-AP)
4-5/8" Offset Projected Architectural Thermal Aluminum Windows Project In TR-740 (AW-PG80-AP) or Project Out (AW-PG80-AP) TR-700 Window Wall Multifaceted Window System for Flexible Design The Admiral at
ENTRANCES & FRAMING kawneer.com
ENTRANCES & FRAMING kawneer.com 08 41 00 ENTRANCES & FRAMING Kawneer offers a comprehensive line of architectural aluminum building products and systems for commercial construction entrances, framing systems,
Guideline Specifications
Page 1 of 7 PART 1 Guideline Specifications Exterior Aluminum/Composite Wall Panels GENERAL ARROWHEAD 508 SYSTEM Pressure Equalized Rainscreen SECTION 07410 1.01 SUMMARY A. Work of this section included
Welcome a New Era in Windows
Welcome a New Era in Windows When you have access to everything under the sun, the possibilities are endless. Traco TR-9460 Fixed Over Fixed Window Northwestern University Ward Building, Chicago, Illinois
This program is intended to be used by the following professionals:
Disclaimer This document is meant to be an explanation of the Prostock program, which is a Do-It-Yourself service, and is NOT designed to answer all questions regarding the program. Duo-Gard Industries
Introduction to Structural Analysis TYPES OF STRUCTURES LOADS AND
AND Introduction to Structural Analysis TYPES OF STRUCTURES LOADS INTRODUCTION What is the role of structural analysis in structural engineering projects? Structural engineering is the science and art
AEROFOILS 200AF-450AF. Sun Control Systems
AEROFOILS 200AF-450AF www.luxalon.com Sun Control Systems Luxalon Aerofoils 200AF - 450AF System Description Luxalon wing-shaped panel elements, or fins, combine optimum solar effectiveness with a firm
REBCO ALUMINUM WINDOWS
REBCO ALUMINUM WINDOWS When you are looking for the perfect windows to enhance your building's facade, you can count on REBCO's experienced staff to assist you with product selection and design as well
16 Passaic Avenue, Unit 9 Fairfield, NJ Phone: (973) Fax: (973)
Date: 16 Passaic Avenue, Unit 9 Fairfield, NJ 07004 Phone: (973) 575-7300 Fax: (973) 575-7301 Proposal Proposal #13-082717 To: Re: Attn: Hollister Construction Service 339 Jefferson Road Parsipany, NJ
Aluminum-Framed Entrances and Storefronts
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 1-25-2013 084113 - Aluminum-Framed Entrances
Jerome J. Connor Susan Faraji. Fundamentals of Structural. Engineering. ^ Springer
Jerome J. Connor Susan Faraji Fundamentals of Structural Engineering ^ Springer Contents Part I Statically Determinate Structures 1 Introduction to Structural Engineering 3 1.1 Types of Structures and
SERIES 8520 AW-PG80-AP PROJECT-OUT AWNING WINDOW
PART 1 - GENERAL 1.1 SCOPE OF WORK SERIES 8520 AW-PG80-AP PROJECT-OUT AWNING WINDOW SECTION 08 51 13 ALUMINUM WINDOWS A. Furnish and install aluminum windows as shown in bid drawings and as per specifications
Parametric Library Components for BIM-based Curtain Wall Design Automation Module
33 rd International Symposium on Automation and Robotics in Construction (ISARC 2016) Parametric Library Components for BIM-based Curtain Wall Design Automation Module Beomjun Kim a and Sangyoon Chin b
FAÇADE DESIGN INOVATIONS AND THE FAÇADE DESIGN PROCESS FOR A SUPER HIGH RISE TOWER IN THE MIDDLE EAST
F. Madeo and M. A. Schnabel (eds.), Across: Architectural Research through to Practice: 48 th International Conference of the Architectural Science Association 2014, pp. 21 29. 2014, The Architectural
Wall Louvers (10200)
Wall Louvers 08 90 00 (10200) PART 1 GENERAL SECTION INCLUDES A. Fixed, extruded-aluminum horizontal storm resistant louver RELATED SECTIONS A. Section 05120 - Structural Steel: Supports for penthouses.
SPECIFICATIONS Adjustable Louvered Roofs (10530) Patio Covers and Pergola Awnings Section
SPECIFICATIONS Adjustable Louvered Roofs (10530) Patio Covers and Pergola Awnings Section 107313 Specifications for Louvered Pergola Awnings by SUNAIR : PART 1 - GENERAL P.O. Box 1068 7785 Rt. 175, Jessup,
STOREFRONT, CURTAINWALL & ENTRANCES
2007 STOREFRONT, CURTAINWALL & ENTRANCES 14.02 14000 Series Flush Glaze Guide Specifications General Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum
Architect: Bruno Marques Photographer: AFFP Filipe Pombo TOPAZE CONTEMPORARY SLIDER
Architect: Bruno Marques Photographer: AFFP Filipe Pombo TOPAZE CONTEMPORARY SLIDER TOPAZE, sobriety, simplicity and adaptability TOPAZE+, exceptional joinery TOPAZE+ offers solutions to specific market
SPECIFICATION GUIDE SLIDING CLOSET DOOR PART 1 - PRODUCT
SPECIFICATION GUIDE SLIDING CLOSET DOOR INTERIOR SLIDING GLASS DOOR PART 1 - PRODUCT 1.1 MANUFACTURER A. COXUSA 4755 E. Zinfandel Court, Suite D Ontario, California 91761 909.545.8900 eddie.coxusa@icloud.com
ALL-ALUMINUM DOOR & WINDOW FRAMING
ALL-ALUMINUM DOOR & WINDOW FRAMING WITH INTEGRATED ALUMINUM DOOR STOP SECTION 08 41 13 ALUMINUM FRAMED ENTRANCES AND STOREFRONTS SPECIFICATION PART 1 GENERAL 1.1 SECTION INCLUDES: A. Prefinished aluminum
MASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
Structural Design of Pergola with Airfoil Louvers
International Journal of Advanced Structures and Geotechnical Engineering ISSN 2319-5347, Vol. 04, No. 03, July 2015 Structural Design of Pergola with Airfoil Louvers MUHAMMAD TAYYAB NAQASH Aluminium TechnologyAauxiliary
SECTION ALUMINUM COMPOSITE MATERIAL WALL PANELS. A. Section includes aluminum composite material wall panels.
1/11 SECTION 074213.23 - ALUMINUM COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section includes aluminum composite material wall panels. 1.2 PRE-INSTALLATION MEETINGS A. Pre-installation
PROJECT LOCATION SECTION TEXTURED METAL PLATE WALL PANELS
SECTION 07 4213.29 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Textured, aluminum metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support
PRODUCT CATALOGUE. Aluminium Extrusion
PRODUCT CATALOGUE Aluminium Extrusion COMPANY PROFILE Established in August 2016, P.K. Metal Industries is the industrial brain child of Mr.Vishal Gaur. A civil engineer who completed his education at
CASEMENT PROJECT OUT SERIES 6400 AAMA/WDMA/CSA 101/I.S.2/A Structural Performance: Thermal Break: Main Frame Depth: 3 1/4
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com CASEMENT PROJECT OUT SERIES 6400
ELM6375DX DRAINABLE ADJUSTABLE LOUVER EXTRUDED ALUMINUM
RUSKIN 3900 Dr. Greaves Rd. Grandview, MO 64030 (816) 761-7476 FAX (816) 966-1655 ELM6375DX DRAINABLE ADJUSTABLE LOUVER EXTRUDED ALUMINUM STANDARD CONSTRUCTION FRAME 6 (152) deep, 6063T5 extruded aluminum
Graham Architectural Products
Graham Architectural Products Blast Resistant Products Windows, Curtain Wall, & Entry Systems CUSTOM MANUFACTURED ARCHITECTURAL GRADE WINDOWS AND DOORS Blast Mitigation......Reducing Risk And Saving Lives
Designing Glass to Resist Wind and Snow Loads
One of the design requirements of glass used in buildings is to resist the loads created by wind and snow. ASTM E1300-02: Standard Practice for Determining Load Resistance of Glass in Buildings provides
SL35 Introduction. NanaWall SL35 The Standard Aluminum Framed Folding System
SL35 Introduction NanaWall SL35 The Standard Aluminum Framed Folding System The SL35 is an aluminum folding panel system designed to provide a moving glass wall for openings as wide as 39. It is a top-hung
ESU-150. Thin-line Louver Thin-line Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Thin-line Blade is a thin-line stationary louver commonly used for interior or exterior applications where high free area and low airflow resistance is required. The narrow depth
CASEMENT PROJECT OUT SERIES 4400 AAMA/WDMA/CSA 101/I.S.2/A Structural Performance: Thermal Break: Main Frame Depth: 4
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com CASEMENT PROJECT OUT SERIES 4400
Town of Bennington, Vermont Planned Commercial District. Design Standards
Town of Bennington, Vermont Planned Commercial District Design Standards Bennington Vermont Planned Commercial District Design Standards Prepared For: Prepared By: Town of Bennington Bailliere Consulting
HORIZONTAL SLIDER SERIES 900 ANSI/AAMA/NWWDA 101/I.S Structural Performance: Thermal Break: C.R.F.: 50. Thermal U Value:.66. Main Frame Depth: 4
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com HORIZONTAL SLIDER SERIES 900 ANSI/AAMA/NWWDA
HORIZONTAL SLIDER SERIES 910 ANSI/AAMA/NWWDA 101/I.S Structural Performance: Thermal Break: C.R.F.: 50. Thermal U Value:.66. Main Frame Depth: 4
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com HORIZONTAL SLIDER SERIES 910 ANSI/AAMA/NWWDA
1.2 Definitions. 1.3 Performance Requirements
DIVISION 08 SECTION 085113 - ALUMIN'UM WINDOWS PART I - GENERAL LI SUMMARY A. Section includes fixed aluminum windows for exterior locations. B. Section includes operable aluminum windows for exterior
Analysis of Shear Wall Transfer Beam Structure LEI KA HOU
Analysis of Shear Wall Transfer Beam Structure by LEI KA HOU Final Year Project report submitted in partial fulfillment of the requirement of the Degree of Bachelor of Science in Civil Engineering 2013-2014
SOLAR CONTROL SOLUTIONS. Product Overview
SOLAR CONTROL SOLUTIONS Product Overview SOLAR CONTROL SOLUTIONS Introduction 3 Omega 4 FlexLouver 8 FlexShade ZIP 12 s_enn 14 s_onro 16 Topspin 18 FlexWave Light Shelf 20 Custom Shading Solutions 22 Controls
EDGEWATER, FLORIDA JUNE 14, 2010
SECTION 12 2413 - ROLLER WINDOW SHADES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
HORIZONTAL SLIDER SERIES 600 AAMA/WDMA/CSA 101/I.S.2/A Structural Performance: Thermal Break: C.R.F.: 50. Thermal U Value:.
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com HORIZONTAL SLIDER SERIES 600 AAMA/WDMA/CSA
PARTIAL LIST OF COMPOSITE/EXTRUDED ALUMINUM SOLAR CONTROL PROJECTS COMPLETED SINCE 1999
PARTIAL LIST OF COMPOSITE/EXTRUDED ALUMINUM SOLAR CONTROL PROJECTS COMPLETED SINCE 1999 No. JOB NAME GENERAL CONTRACTOR 1 UNIVERSITY OF WINDSOR STUDENT RESIDENCE EASTERN CONSTRUCTION Windsor, ON Tel: 519-258-1200
DOUBLE HUNG SERIES 860 AAMA/WDMA/CSA 101/I.S.2/A Structural Performance: Thermal Break: C.R.F. 50. Thermal U Value:.61. Main Frame Depth: 4
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com DOUBLE HUNG SERIES 860 AAMA/WDMA/CSA
A. This Section includes ceiling- and wall-mounted diffusers, registers, grilles and louvers.
SECTION 23 37 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SINGLE HUNG SERIES 810 AAMA/WDMA/CSA 101/I.S.2/A Structural Performance: Thermal Break: C.R.F.: 50. Thermal U Value:.61. Main Frame Depth: 4
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com SINGLE HUNG SERIES 810 AAMA/WDMA/CSA
The Alternative to Storefront. Gerkin Model 58F
The Alternative to Storefront Gerkin Model 58F Why do we need an alternative? To provide windows with factory glazing To eliminate water leaks To eliminate the need for sill flashing w/ end dams To reduce
SECTION CRC575 UNITARY CLEANROOM WALL SYSTEM STUDLESS CLEANROOMWALL SYSTEM ME175 3-IN-1 CLEANROOM WALL SYSTEM
SECTION 13200 CRC575 UNITARY CLEANROOM WALL SYSTEM 175-300 STUDLESS CLEANROOMWALL SYSTEM ME175 3-IN-1 CLEANROOM WALL SYSTEM PART 1 GENERAL 1.01 WORK INCLUDED A. This Section provides the requirements necessary
Sapa Decorative profiles. Add, Expressive and Optima design facade glass holders
Sapa Decorative profiles Add, Expressive and Optima design facade glass holders Add Add is a flexible mounting system for attaching solar shades, lightning conductors, downpipes, gutters, signs, lighting
PROJECT LOCATION SECTION ZINC ALLOY METAL PLATE WALL PANELS
SECTION 07 42 13.26 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Zinc alloy metal plate wall panels. 1.02 RELATED REQUIREMENTS A. Section 05 4000 Cold-Formed Metal Framing: Wall panel substrates support framing.
3 rd Annual. Big Book of Lists. The. INSIDE: Our One-on-One with Roger O Shaughnessy
INSIDE: Our One-on-One with Roger O Shaughnessy METAL & GLAZING THE MAGAZINE OF INFLUENCE FOR GLASS INDUSTRY LEADERS VOLUME 42, ISSUE 2 FEBRUARY 2007 Free Subscription Form on Page 116 The 3 rd Annual
EXTREME. Makeover. Nu Skin Enterprises Utah campus gets a fresh new look.
EXTREME Makeover Nu Skin Enterprises Utah campus gets a fresh new look. BY RON KLEMENCIC, S.E., P.E. THE NU SKIN INNOVATION CENTER brings a new face to Nu Skin Enterprises. The anti-aging product company
WESTECK WINDOWS and DOORS
WESTECK WINDOWS and DOORS SECTION 08565 VINYL (PVC) PATIO DOOR GENERAL Supply PVC patio sliding doors as per approved Shop Drawings. PART 1 1.1 SECTION INCLUDES A. Patio sliding doors 1.2 RELATED SECTIONS
ESD-635. Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver Drainable Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates drain gutters in the head
CURTAIN WALL SYSTEMS. High Performance LOUVERS for High Performance
High Performance LOUVERS for High Performance CURTAIN WALL SYSTEMS New York by Gehry at 8 Spruce Street Location: New York, NY Architect: Frank Gehry Photographer: Lester Ali CS RSH-5700 Storm Resistant
Marina Bay Sands Hotel Arch 631 Kayla Brittany Maria Michelle
Marina Bay Sands Hotel Arch 631 Kayla Brittany Maria Michelle Overall Information Location: Singapore Date of Completion: 2010 Cost: $5.7 billion Architect: Moshe Safdie Executive Architect: Aedas, Pte
ESD-403. Stationary Louver Drainable Blade. Application and Design. Standard Construction. Options (at additional cost)
Application and Design Stationary Louver Drainable Blade is a weather louver designed to protect air intake and exhaust openings in building exterior walls. Design incorporates a drainable head member
Central Dartmouth Section Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Dartmouth, NS
Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Part 1 General 1. RELATED SECTIONS 1. Section 07 92 10 Joint Sealing 2. Section 08 71 00 Door Hardware 2. REFERENCES 1. American Society
BLAST PERFORMANCE OF NON-CAPTURED STRUCTURALLY GLAZED INSULATED GLASS UNITS SAMUEL POND, P.E. + JAMES CASPER, S.E., P.E.
BLAST PERFORMANCE OF NON-CAPTURED STRUCTURALLY GLAZED INSULATED GLASS UNITS SAMUEL POND, P.E. + JAMES CASPER, S.E., P.E., LEED [BD + C] A captured glazing system relies on a pressure cap or cover to mechanically