FRIDAY, NOVEMBER 21, WORKPLACE SAFETY AND HEALTH (APPROVED CODES OF PRACTICE) NOTIFICATION 2014
|
|
|
- Job McGee
- 6 years ago
- Views:
Transcription
1 FRIDAY, NOVEMBER 21, First published in the Government Gazette, Electronic Edition, on 21st November 2014 at 5.00 pm. No WORKPLACE SAFETY AND HEALTH ACT (CHAPTER 354A) WORKPLACE SAFETY AND HEALTH (APPROVED CODES OF PRACTICE) NOTIFICATION 2014 In accordance with section 40B(3) of the Workplace Safety and Health Act (Cap. 354A), the Workplace Safety and Health Council hereby notifies that the Council has approved the Codes of Practice set out in the Schedule, with effect from 1 December The approved Codes of Practice may be inspected at the place and time and on such days as follows: Place: Day: Time: Workplace Safety and Health Council 1500 Bendemeer Road, #04-01 Ministry of Manpower Services Centre Singapore Mondays to Fridays (public holidays excepted) 9.00 a.m. to 1.00 p.m p.m. to 5.00 p.m. THE SCHEDULE 1. Code of Practice for Working Safely at Heights 2. Code of Practice on WSH Risk Management Code of Practice on Safe Lifting Operations in the Workplaces SS 98: Specification for industrial safety helmets 5. SS 280: Specification for Metal scaffoldings Part 1: Frame scaffoldings 6. SS 280: Specification for Metal scaffoldings Part 2: Modular scaffoldings 7. SS 311: Specification for Steel tubes and fittings used in tubular scaffolding 8. SS 473: Specification for Personal eye-protectors Part 1: General requirements 9. SS 473: Specification for Personal eye-protectors Part 2: Selection, use and maintenance 2005
2 2 REPUBLIC OF SINGAPORE GOVERNMENT GAZETTE 10. SS 497: Code of Practice for Design, safe use and maintenance of gantry cranes, overhead travelling cranes and monorail hoists 11. SS 506: Occupational safety and health (OSH) management Part 1: Requirements 12. SS 506: Occupational safety and health (OSH) management Part 2: Guidelines for the implementation of SS 506: Part 1: 13. SS 506: Occupational safety and health (OSH) management Part 3: Requirements for the chemical industry 14. SS 508: Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings 15. SS 508: Specification for graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels Amendment No. 1 () 16. SS 508: Graphical symbols Safety colours and safety signs Part 3: Design principles for graphical symbols for use in safety signs 17. SS 508: Graphical symbols Safety colours and safety signs Part 4: Colorimetric and photometric properties of safety sign materials 18. SS 508: Graphical symbols Safety colours and safety signs Part 5: Registered safety signs 19. SS 510: Code of Practice for Safety in welding and cutting (and other operations involving the use of heat) (Formerly CP 50) SS 511: Code of Practice for Diving at work 21. SS 513: Specification for personal protective equipment Footwear Part 1: Safety footwear 22. SS 513: Specification for personal protective equipment Footwear Part 2: Test methods for footwear 23. SS 514: Code of Practice for Office ergonomics 2005
3 FRIDAY, NOVEMBER 21, SS 528: Specification for Personal fall-arrest s Part 1: Full-body harnesses 25. SS 528: Specification for Personal fall-arrest s Part 2: Lanyards and energy absorbers 26. SS 528: Specification for Personal fall-arrest s Part 3: Self-retracting lifelines 27. SS 528: Specification for Personal fall-arrest s Part 4: Vertical rails and vertical lifelines incorporating a sliding-type fall arrester 28. SS 528: Specification for Personal fall-arrest s Part 5: Connectors with self-closing and self-locking gates 29. SS 528: Specification for Personal fall-arrest s Part 6: System performance tests 30. SS 531: Code of Practice for Lighting of work places Part 1: Indoor 31. SS 531:Code of Practice for Lighting of work places Part 2: Outdoor 32. SS 531:Code of Practice for Lighting of work places Part 3: Lighting requirements for safety and security of outdoor work places 33. SS 532: Code of Practice for The storage of flammable liquids SS 536: Code of Practice for The safe use of mobile cranes (Formerly CP 37) 35. SS 537: Code of Practice for Safe use of machinery Part 1: General requirements 36. SS 537: Code of Practice for Safe use of machinery Part 2: Woodworking machinery 37. SS 541: Restraint belts Amendment No. 1 (2012) 38. SS 548: Code of Practice for Selection, use, and maintenance of respiratory protective devices (Formerly CP 74) 39. SS 549: Code of Practice for Selection, use, care and maintenance of hearing protectors (Formerly CP 76)
4 4 REPUBLIC OF SINGAPORE GOVERNMENT GAZETTE 40. SS 550: Code of Practice for Installation, operation and maintenance of electric passenger and goods lifts (Formerly CP 2) 41. SS 553: Code of Practice for Air-conditioning and mechanical ventilation in buildings (Formerly CP 13) 42. SS 554: Code of Practice for Indoor air quality for air-conditioned buildings 43. SS 557:Code of Practice for Demolition (Formerly CP 11) 44. SS 559: Code of Practice for Safe use of tower cranes (Formerly CP 62) 45. SS 562: Code of Practice for Safety in trenches, pits and other excavated areas 46. SS 567: Code of Practice for Factory layout Safety, health and welfare considerations (Formerly CP 27) 47. SS 568: Code of Practice for Confined spaces (Formerly CP 84) 48. SS 569: Code of Practice for Manual handling (Formerly CP 92) 49. SS 570: Specification for Personal protective equipment for protection against falls from a height Single point anchor devices and flexible horizontal lifeline s 50. SS 571: Code of Practice for Energy lockout and tagout (Formerly CP 91) 51. SS 573: Code of Practice for The safe use of powered counterbalanced forklifts (Formerly CP 101) SS 580: Code of Practice for Formwork (Formerly CP 23) SS 586: Specification for hazard communication for hazardous Part 1: Transport and storage of dangerous goods 54. SS 586: Specification for hazard communication for hazardous Part 2: Globally harmonised of classification and labelling of chemicals Singapore s adaptations
5 FRIDAY, NOVEMBER 21, SS 586: Specification for Hazard communication for hazardous Part 3: Preparation of safety data sheets (SDS) 56. SS 588: Personal equipment for protection against falls Rope access s Part 1: Fundamental principles for a of work 57. SS 588: Personal equipment for protection against falls Rope access s Part 2: Code of practice 58. CP 5: Code of Practice for Electrical installations Amendment No. 1 () CP 14: Code of Practice for Scaffolds CP 20: Code of Practice for Suspended scaffolds CP 63: Code of Practice for The lifting of persons in work platforms suspended from cranes 62. CP 79: Code of Practice for Safety management for construction worksites 63. CP 88: Code of Practice for Temporary electrical installations Part 1: Construction and building sites 64. CP 88: Code of Practice for Temporary electrical installations Part 2: Festive lighting, trade-fairs, mini-fairs and exhibition sites 65. CP 88: Code of Practice for Temporary electrical installations Part 3: Shipbuilding and ship-repairing yards 1996 (2005) CP 99: Code of Practice for Industrial noise control 2003 Revocation 3. The Workplace Safety and Health () Notification is revoked. Made this 14th day of November LEE TZU YANG Chairman, Workplace Safety and Health Council, Singapore.
CURRICULUM DEVELOPMENT ADVISORY
CURRICULUM DEVELOPMENT ADVISORY Safety Instruction Course for Ship-Repair Managers (SICSM) Version 1.0 01 August 2011 Workplace Safety and Health Council, Ministry of Manpower, Singapore (MOM) All rights
Written Safety and Health Program
Written Safety and Health Program For XYZ Company Required for all Hawaii Businesses with 25 or More Employees Incorporates Provisions of Hawaii Administrative Rules Title 12, Subtitle 8, Part 2, Chapter
Scaffolding Procedures
Procedures Purpose It is the purpose of this company in issuing these procedures to further ensure a safe workplace based on the following formal, written procedures for scaffold work. Application This
WORKING AT HEIGHT PROCEDURE
Page 1 of 8 AL-Yamama Engineering Company HSSE Department (s) WORKING AT HEIGHT PROCEDURE Page 1 of 8 Page 2 of 8 Introduction Work at height is any work activity that is performed where the work is to
Management Plan for Walking/Working Surfaces & Fall Protection (29 CFR , 23, 66 App.C; 29 CFR ) ISD #535
Management Plan for Walking/Working Surfaces & Fall Protection (29 CFR 1910.22, 23, 66 App.C; 29 CFR 1926.502) ISD #535 Health & Safety Office Maintenance Service Building 10 SE 9½ Street Rochester, MN
SafetySkills. SafetySkills Course Information
SafetySkills Course Information Effective Training SafetySkills creates the most effective HR and EHS courses available because it ensures a lean-forward, front-of-the-seat learning experience. Highly
Contents. 1. Introduction What this Guide is about Regulations and Other Guidance Documents 2
Contents 1. Introduction 2 1.1 What this Guide is about 2 1.2 Regulations and Other Guidance Documents 2 2. Planning for Safety 3 2.1 Fall Prevention Plan 3 2.1.1 Identifying Fall Hazards Working on Roofs
CURRICULUM DEVELOPMENT ADVISORY
CURRICULUM DEVELOPMENT ADVISORY WORK-AT-HEIGHT COURSE FOR ASSESSORS Version 1.1 1 September 2014 Workplace Safety and Health Council, Ministry of Manpower (MOM), Singapore All rights reserved. This document
The Corporation of The City of London
The Corporation of The City of London Legislative Health and Safety Requirements The following is a health and safety guide for those providing a tender to assist in determining legislative health and
OCCUPATIONAL HEALTH AND SAFETY ACT SCAFFOLDING REGULATIONS
c t OCCUPATIONAL HEALTH AND SAFETY ACT SCAFFOLDING REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to October 28,
Scaffolding. Safety Guide. STOP! Before you climb
Scaffolding Safety Guide Printed FEB 2015 rebr. AUG 2016 Contents Safety Guide Disclaimer... 1 Safety Guide Objectives... 2 Roles & Responsibilities of Workplace Parties Employers, Supervisors, Workers...
OSHA 1994 AND FMA Chapter 4 (cont.)
OSHA 1994 AND FMA 1967 Chapter 4 (cont.) OSHA 1994 The aims of this Act are to secure the safety, health and welfare of persons at work against risks to safety or health arising out of the activities of
Scaffolding Safety. Scaffolding
Scaffolding Safety Scaffolding 1926.450 - Scope, Application Covers all scaffolds used in workplaces Does not apply to crane or derrick suspended personnel platforms, which are covered by 1926.550(g) Aerial
ROOFS PART 2 RESIDENTIAL BUILDINGS
SAFE WORK ON ROOFS PART 2 RESIDENTIAL BUILDINGS CODE OF PRACTICE 2004 WorkCover. Watching out for you. Disclaimer This publication may contain occupational health and safety and workers compensation information.
SAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT Principal Contractor: ROBERT LIVINGSTONE Project Address: 123 SYDNEY ROAD SYDNEY NSW 2000 High Risk Work Hazards and Risks Identified Control Measures Persons working at a height
CONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER
CONSULTING OFFICE OF MORRIS S. FARKAS PROFESSIONAL SAFETY ENGINEER EDUCATION 3835 East Thousand Oaks Boulevard, #365 Westlake Village, California 91362 Telephone: (805) 494-0444 Facsimile: (805) 494-0441
Most Commonly Misunderstood Standards for Oil and Gas Industry
Most Commonly Misunderstood Standards for Oil and Gas Industry Presented by: Dale Robinson HR Safety Consulting, LLC Erie, Colorado 80516 www.hrsafety.com Like us on Facebook at: HR Safety Consulting,
(6) Crawl boards and ladders used for roof work shall be securely fastened over the ridge of the roof or be otherwise effectively anchored.
Newfoundland & Labrador - Terre-Neuve-et-Labrador Ladder Safety - Sécurité des échelles This material has been extracted from the Acts and Regulations of the Province to help students understand the subject.
Introduction to the Trade
Lesson Plans for Module 31101-15 Introduction to the Trade Module 31101-15 introduces the scaffolding trade and its associated trade math, regulations, and standards; identifies commonly used scaffolding
Excavation Safety Program
Excavation Safety Program Excavation, Trenching & Shoring Safety I. Purpose The purpose of this policy is to establish safe operating procedures for any earthwork or underground work that is done on a
BASIC SCAFFOLDING KNOWLEDGE QUESTIONS
Garnsworthy Square 46, 62 & 64 Garnsworthy St Springvale rth Victoria 3171 Updated on 22/02/08 STC105 Name BASIC SCAFFOLDING KNOWLEDGE QUESTIONS THE PROFESSIONAL Scaffold Tools Scaffold Belts Couplers
Copies of the written program may be obtained at Where are copies of this written plan kept? (Insert building/room, etc.).
Scaffolding Safety Procedures for Construction Purpose It is this company's purpose in issuing these procedures to further ensure a safe workplace based on the following formal, written procedures for
Contents. 1. Introduction What this Guide is about Regulations and Other Guidance Documents 2
Contents 1. Introduction 2 1.1 What this Guide is about 2 1.2 Regulations and Other Guidance Documents 2 2. Planning for Safety 3 2.1 Fall Prevention Plan 3 2.1.1 Identifying Fall Hazards Working on Roofs
SHORT COURSES. Industry Training New Zealand
SHORT COURSES Industry Training New Zealand 2 CONTENTS About Tai Poutini Polytechnic About Training for Industry Short Courses Cranes Truck Mounted Crane Pendant Crane Lifting Loads Telehandler Scaffolding
BP U.S. Pipelines and Logistics (USPL) Safety Manual Page 1 of 7
Safety Manual Page 1 of 7 Scaffolds 1. Purpose This policy establishes the basic safety requirements and safe work practices for the erection, use, inspection, movement, and dismantling of scaffolding.
Consequences Workers put in dangerous positions Fall
Legislations on Working at height 1 Inadequate Planning and provision for weather Misuse Unprotected edges and openings Structural elements incorrectly erected or installed Load insecurely attached These
Comparison of the two proposals developed by the Ministry of Labour (MOL) and the SAE Working Group (SAE WG)
to Ontario Regulation 213/91 (Construction Projects) under the Occupational Health and Safety Act (OHSA) related to Suspended Access Equipment (SAE) Comparison of the two proposals developed by the Ministry
Effective Date: 14-March Table of Contents
Version: 2 Page: 1 of 10 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 2.0 Guarding of Floor Openings, Wall Openings and Holes... 3 2.1 Stairway Floor Openings...
SAFETY AND HEALTH TRAINING AND INSTRUCTION REQUIREMENTS
The following is a list of the instruction and training requirements contained in the Construction Safety Orders (Subchapter 4) and the General Industry Safety Orders (Subchapter 7) of Title 8, Division
SAFE WORK ENVIRONMENTAL METHOD STATEMENT SWEMS ERECTION & DISMANTLING OF SCAFFOLD
Safe Work and Environmental Method Statement. Contractor: Premium Scaffold Solutions Pty Ltd ABN # 42 149 568 981 Address: U5 8/10 Tullamarine Park Road TULLAMARINE VIC 3043 Workplace / Project: WRA Referred
NATIONAL COMPETENCY STANDARD
NATIONAL COMPETENCY STANDARD WSQ Framework : WSH Professionals Competency Category : Plan and review of WSH Competency Code : WP-PR-304E-1 Competency Unit : Recognise WSH hazards and control measures in
ANSI/ ASME HST Performance Standard For Overhead Electric Wire Rope Hoists
SECTION 412213- BRIDGE CRANES Part 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
Apply for Working at Heights Permit
Apply for Working at Heights Permit Details of revisions Level Details Date Initial 1 Creation of initial document for use 05/09/2017 MW 2 Amendment to implement time frames 23/03/2018 MW Title: Apply
PS 02 PLANT AND EQUIPMENT
PS 02 PLANT AND EQUIPMENT PURPOSE AND SCOPE The intent of this document is to eliminate or minimise the risks of fatalities, injuries and incidents arising from mobile powered plant, static plant and equipment
POLICY ON PERSONAL PROTECTIVE EQUIPMENT
Effective date: August 27, 2016 Supersedes/Amends: November 29, 2005 Originating office: Vice-President, Services Policy Number: VPS-41 SCOPE This policy applies to all Members of the University Community
DEPAUL UNIVERSITY. Scaffolding Program. Environmental Health & Safety. April 2017
DEPAUL UNIVERSITY Scaffolding Program Environmental Health & Safety April 2017 1 TABLE OF CONTENTS SECTION PAGE NO. 1.0 PURPOSE 2 2.0 SCOPE 2 3.0 SCAFFOLDING ERECTOR 2 4.0 GENERAL 2 5.0 WOOD SCAFFOLDING
Safety and Environmental Orientation and Practices for Contractors
Safety and Environmental Orientation and Practices for Contractors Welcome to the University of California, Irvine. Some University facilities are unique and the practices listed here are for your safety
SAFE WORK ON ROOFS Part 2 Residential Buildings CODE OF PRACTICE
SAFE WORK ON ROOFS Part 2 Residential Buildings CODE OF PRACTICE July 1999 2 CONTENTS 1. INTRODUCTION 2. CONSULTATION 3. PLANNING AND PREPARATION 4. WORK SYSTEMS AND CONTROL MEASURES 5. EDGE PROTECTION
(7 February 2014 to date) OCCUPATIONAL HEALTH AND SAFETY ACT 85 OF 1993
(7 February 2014 to date) OCCUPATIONAL HEALTH AND SAFETY ACT 85 OF 1993 (Gazette No. 14918, Notice No. 1158, dated 2 July 1993. Commencement date: 1 January 1994, except section 1(3): to be proclaimed)
TABLE OF CONTENT: ACOP NO. ALBA SAFETY, HEALTH & ENVIRONMENT MANAGEMENT SYSTEM. ALBA Code of Practice (ACOP) Subject PAGE
Contractors Safety Health and Environment Management 1 OF 13 TABLE OF CONTENT: 1.0 Introduction... 3 2.0 Purpose... 3 3.0 Responsibilities... 3 4.0 General Requirements... 3 5.0 Training... 4 6.0 Other
SAFE WORK ON ROOFS COMMERCIAL AND INDUSTRIAL BUILDINGS
SAFE WORK ON ROOFS COMMERCIAL AND INDUSTRIAL BUILDINGS CODE OF PRACTICE 2008 DRAFT ONLY WorkCover. Watching out for you. Disclaimer This publication may contain occupational health and safety and workers
Region of Waterloo Job Description
Region of Waterloo Job Description Title: Corporate Performance Improvement Specialist Job Code: Department/Division: Human Resources & Citizen Service/Commissioner s Office Union: Management/Management
OHS - Making Contracts Work. Contractor Safety Checklists
OHS - Making Contracts Work Contractor Safety Checklists OHS - Making Contracts Work Contractor Safety Checklists Authors: Greg Dodd and Kathy Haseloff Safety Valve Consulting Publisher: Mining and Quarrying
BOOM-SUPPORTED ELEVATING WORK PLATFORM PROGRAM
Page: 1 of 7 1.0 PURPOSE and APPLICABILITY 1.1 It is the policy of the University of Pennsylvania in coordination with the Office of Environmental Health and Radiation Safety to provide the University
WHS RISK REGISTER FOR THE DESIGN OF BUILDINGS AND STRUCTURES
WHS RISK REGISTER FOR THE DESIGN OF BUILDINGS AND STRUCTURES Project Name: Project Manager: Date Building of Hand Over: Design Consultants: Qualifications, skills, experience: Hazard Identified Risk Level
SCAFFOLDS AND SCAFFOLDING WORK
SCAFFOLDS AND SCAFFOLDING WORK Code of Practice TABLE OF CONTENTS FOREWORD... 4 SCOPE AND APPLICATION... 4 1. INTRODUCTION... 5 1.1 What is a scaffold and scaffolding work?... 5 1.2 Who has health and
Scissor Lift Safety. Supervisor Manual 29 CFR , 451, 452, 454. Page 0
Scissor Lift Safety 29 CFR.1926.450, 451, 452, 454 Supervisor Manual Page 0 Table of Contents Purpose... 2 Program Responsibilities... 2 Management... 2 Supervisors... 2 Employees... 2 Definitions... 3
Tom Carpenter Crane Maintenance Technician
Tom Carpenter Crane Maintenance Technician OSHA 29 CFR 1910.179 Overhead and Gantry Cranes 1910.179 (b)(2) All new overhead and gantry cranes constructed and installed on or after August 31, 1971, shall
ISO/TR TECHNICAL REPORT. Cranes Bridge and gantry cranes International Standards for design and manufacturing requirements and recommendations
TECHNICAL REPORT ISO/TR 16880 First edition 2004-04-01 Cranes Bridge and gantry cranes International Standards for design and manufacturing requirements and recommendations Appareils de levage à charge
BP OIL -- TOLEDO REFINERY
BP OIL -- TOLEDO REFINERY Document Type: Procedure Refinery Wide Procedure No.: SAF 076 Effective Date: 3/31/17 Scaffold Procedure Revision No.: 8 Owner: E. Stewart / N. Weber Authorized By: Chris Conley
Safety Policy and Procedure
Safety Policy and Procedure Policy Number: 030 Authorized By: The Cianbro Companies Alan Burton Title: Placing Concrete Effective Date: 10/01/94 Page 1 of 5 1 Status 1.1 Update of existing policy, effective
Construction Regulations 2014 vs Construction Regulations 2003
Construction Regulations 2014 vs Construction Regulations 2003 By Mark Winter Safe Working Practice Tel: 071 6032213 / 021 7121643 mwinter@safepractice.co.za Why the new Construction Regulations? What
Document Number: HSE Created: February 21, 2013 SCAFFOLDING. Author: A Holland
Document Number: HSE33-001 Created: February 21, 2013 SCAFFOLDING Author: A Holland MAPP Construction - Corporate 344 Third Street Baton Rouge, LA 70801 (225) 757-0111 MAPP Construction - Houston 11511
OASIS PETROLEUM NORTH AMERICA LLC OASIS WELL SERVICES LLC. Contractor Environmental, Health and Safety (EHS) Requirements
March 8, 2012 OASIS PETROLEUM NORTH AMERICA LLC OASIS WELL SERVICES LLC Contractor Environmental, Health and Safety (EHS) Requirements March 2012 March 8, 2012 OASIS PETROLEUM NORTH AMERICA LLC OASIS WELL
Employer Safety and Health Program Self-Assessment EMPLOYER SAFETY AND HEALTH. Program Self-Assessment S April S-866 April 2018.
EMPLOYER SAFETY AND HEALTH Program S-8666 April 2018 S-866 April 2018 Page 1 We strongly encourage you to use SAIF s other safety and health guides as you work through this process. They provide practical
Personal Protective Equipment
Section 8, Page 1 Contents: Introduction Introduction General Requirements General Guide The North Carolina Occupational Safety and Health Act of 1973 was enacted to assure so far as possible every working
Region of Waterloo Job Description
Region of Waterloo Job Description Title: Transit Scheduler Job Code: Department/Division: Transportation & Environmental Services/Transit Services Union: anagement/anagement Support Reports to: Supervisor,
DOUBLE SLIDE RAIL INSTALLATION METHOD. Double Slide Rail August
Double Slide Rail August 2015 1 DOUBLE SLIDE RAIL INSTALLATION METHOD Introduction Slide rail shoring systems can be used for trenches up to 12m wide and 6m deep. Module length is determined by panels
Summary. Mini KKP - Assembly and operating manuel Pile guide box. Montage. Implementation. Accessories. Technical data
Summary Technical data Montage Implementation Accessories p3 p5 p6 p7 KRINGS INTERNATIONAL FRANCE - Mini KKP - 1 Conformité DIN 4124 DIN EN 13331 H L L c b C0 b CU b t pl Plate height Plate length Pipe
Safety and Ergonomics Study for High Rise Construction Project
Safety and Ergonomics Study for High Rise Construction Project Er.Saurabh J.Gawali 1 Prof.P.M.Attarde 2 1Student of Masters of Civil Engineering at SSGBCOE&T, Bhusawal, India 2Associate Professor, Department
SAFE WORK METHOD STATEMENT (SWMS)
ABN: 12 345 678 910 ACN: 123 456 789 Address: Your Company Address PH: Your Company Phone E: Your Company Email Web: Your Company Website PROJECT DETAILS: Project: SAFE WORK METHOD STATEMENT (SWMS) Area:
Installation Manual. Orion. TL-3 Steel Barrier. VHD (v2)
Installation Manual Orion TL-3 Steel Barrier VHD (v2) 300914 Table of Contents Orion Introduction.......... 3 Limitations & Warnings. 4 Before Installation..... 3 System Design & Design Considerations
Installation Instructions/Operation and Maintenance Manual. Models PLG-60 PLG-72. PS DOORS Contact Information. Website psdoors.
Rev. 091416 Pallet Gate Installation Instructions/Operation and Maintenance Manual Models PLG-60 PLG-72 Table of Contents Product Information...2 Installation Instructions...3 Operation...6 Inspection
Construction OS&H Vertical movement
Construction OS&H Vertical movement Summary Common hazards with vertical movement Cranes Hoists Vertical distribution of concrete Falls of materials What are the common hazards with vertical movement?
STANDARD PRACTICE INSTRUCTION
STANDARD PRACTICE INSTRUCTION DATE: March 1, 2001 SUBJECT: Scaffolding Safety Program. REGULATORY STANDARDS: 29 CFR 1910.28 Safety Requirements For Scaffolding. 29 CFR 1910.29 Manually Propelled Mobile
Operate a dozer (wheeled and tracked)
Operate a dozer (wheeled and tracked) Code OHSCER209A Workplace Health and Safety Queensland is moving to a new learning and assessment system for certificates to work in prescribed occupations. Learning
SHE 002 Method Statements and Risk Assessments
SHE 002 Method Statements and Risk Assessments Arqiva Site Access Requirements This information sheet is designed to detail the mandatory requirements that anyone accessing and working on an Arqiva site
OSHA Rules for Scaffolding
OSHA Rules for Scaffolding A) Objectives: 1. 2. 3. Don t let the scaffold fall. Don t fall off the scaffold. Don t let the material fall off the scaffold. Name of Competent Person: Name of Qualified Person:
CAL/OSHA ELECTRICAL HIGH VOLTAGE
Preparation: Safety Mgr Authority: CEO Issuing Dept: Safety Page: Page 1 of 7 Purpose The purpose of this program is to prevent injuries due to electrical exposure to high voltage for employees and contractors
Standards Summary Sheet
Standards Summary Sheet CSA Standard B167-2008 (R2015) Overhead Travelling Cranes Design, Inspection, Testing, Maintenance and Safe Operation Scope and Application This standard specifies the minimum requirements
A-one+ Supply Chain Standards
A-one+ Supply Chain Standards A-one+ Page 1 of 12 Introduction We at A-one+ are committed to achieving an incident and accident free environment through our health and safety strategy. We demand Supply
MOL & OHSA review Municipal Building Inspectors
MOL & OHSA review Municipal Building Inspectors October 2011 1 Ministry of Labour The following material is presented in 2 parts: Part One: provides a very brief overview of the structure of the Construction
SHOWCASE NETWORK RAIL
SHOWCASE NETWORK RAIL Cannon Street, London The Shard, London Bridge, SE1 Kwik-Kilk is an approved supplier of modular hoarding systems for Network Rail. We have a versatile range of systems and fixings
TRENCH SAFETY TRAINING
TRENCH SAFETY TRAINING TRENCH SAFETY TRAINING TRENCHING ACCIDENTS ACCOUNT FOR MORE THAN 100 DEATHS A YEAR ON U.S. SOIL. 11 TIMES MORE WORKERS ARE INJURED 1% OF ALL CONSTRUCTION ACCIDENTS INJURY RATE FOR
A Glimpse to the Revision of WSH Guidelines for Landscape and Horticulture Works
A Glimpse to the Revision of WSH Guidelines for Landscape and Horticulture Works By Mr Goh Eng Lam, Chairman of Landscape Guidelines Workgroup and Immediate Past Chairman of Landscape Industry Association
RISK ASSESSMENT As exhibitions and events are deemed as hazardous environments, it is a legal requirement that all exhibitors and contractors
RISK ASSESSMENT As exhibitions and events are deemed as hazardous environments, it is a legal requirement that all exhibitors and contractors undertake a suitable and sufficient Risk Assessment prior to
WORK IN THE VICINITY OF POWER POLES AND OVERHEAD LINES
CONTRACTOR WHS HAZARD STANDARD WORK IN THE VICINITY OF POWER POLES AND OVERHEAD LINES EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES
Walking/Working Surfaces
DEPAUL UNIVERSITY Walking/Working Surfaces Environmental Health & Safety May 2016 1 TABLE OF CONTENTS SECTION PAGE NO. 1.0 PURPOSE 2 2.0 RESPONSIBILITIES 2 2.1 Environmental Health and Safety 2.2 Facility
ISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
P11 Handling and Storage E212 - Facilities Planning and Design
P11 Handling and Storage E212 - Facilities Planning and Design Material Handling Is the art and science of moving, storing, protecting and controlling material. Means providing the: Right amount of Material
References. EM , Sections 22 OSHA 29CFR (Subpart L ) UFGS [Latest] ANSI A
![References. EM , Sections 22 OSHA 29CFR (Subpart L ) UFGS [Latest] ANSI A](/thumbs/78/77338209.jpg "References. EM , Sections 22 OSHA 29CFR (Subpart L ) UFGS [Latest] ANSI A")
References EM385-1-1, Sections 22 OSHA 29CFR 1926.450 (Subpart L ) UFGS-01 35 29[Latest] ANSI A10.8-1988 What Is A Scaffold? An elevated, temporary work platform Three basic types: Supported scaffolds
Design for Safety Working at Height
Design for Safety Working at Height Andy Lo IOSH Council Member 25 th Sept 2017 About IOSH n Formed 1945; Royal Charter 2003 n Individual Charter 2005 n International NGO status (ILO) in 2006 n n n n n
FACILITIES MANAGEMENT CONTRACTOR SAFETY PROGRAM
FACILITIES MANAGEMENT CONTRACTOR SAFETY PROGRAM Document History Version Date Comments 0.1 Sept 1, 2015 Initial Draft 0.2 Sept 30, 2015 Internal Review 0.3 Jan 25, 2016 External Review 0.4 March 21, 2016
Fall Prevention For Scaffolders
Fall Prevention For Scaffolders Document Type: Guidance Note Keycode: web only Industry: Construction, Category: Falls Prevention, General, Manual Handling, Division Author: construction Current Version:
Managing Workplace Health Hazards Strategies & Approaches
Managing Workplace Health Hazards Strategies & Approaches Ng Zhihan Senior Specialist Occupational Hygiene Branch OSH Specialist Department Ministry of Manpower A Great Workforce A Great Workplace 2010
CLIMA AGR. Mobile Aluminium Tower with Climbing Frames 1450/850 Camlock Advanced Guardrail USER GUIDE
CLIMA AGR Mobile Aluminium Tower with Climbing Frames 1450/850 Camlock Advanced Guardrail USER GUIDE Contents Safety First Safety Checklist Quantity Schedules Assembly and Dismantling Procedure Toe Boards
Does the Work Package Plan include the relevant items as stated in the WPP template? Is the information presented in the same order as the template?
Work Package title and reference Project title and reference Format Y/N/na Does the Work Package Plan include the relevant items as stated in the WPP template? Is the information presented in the same
Region of Waterloo Job Description
Region of Waterloo Job Description Title: Assistant Library Supervisor (Branch) Job Code: Department/Division: Planning, Development & Legislative Services/Cultural Services Union: Part-time without Full-time
SCAFFOLDING PROCEDURE
SCAFFOLDING PROCEDURE 1 Table of Contents 1 PURPOSE... 3 2 PROGRAM COMPLIANCE... 3 3 SCOPE... 3 4 DEFINITIONS... 3 5 RESPONSIBILITES... 4 6 SCAFFOLD INSPECTION... 5 7 SCAFFOLD USE... 5 8 SCAFFOLD REQUIREMENTS...
Region of Waterloo Job Description
Region of Waterloo Job Description Title: Supervisor, Fleet (Transit) Job Code: R00874 Department/Division: Transportation & Environmental Services/Transit Services Union: anagement/anagement Support Reports
Lockheed Martin. Emergency Phone Numbers. Medical Emergency 911. Occupational Safety & Health Plant Protection
Lockheed Martin Emergency Phone Numbers Fire-Waterton Main Plant 911 (or use FIRE ALARM BOX) Medical Emergency 911 Occupational Safety & Health 7-4444 Plant Protection 7-4646 Off-site for cell phone numbers
RESOURCE TRAINING SOLUTIONS. SafetySkills COURSE CATALOG. Skills. safetyskills.com v4 11/13/2013. powered by noodlestream.com
RESOURCE TRAINING SOLUTIONS SafetySkills COURSE CATALOG TM Skills powered by noodlestream.com safetyskills.com v4 11/13/2013 RESOURCE TRAINING SOLUTIONS SafetySkills interactive, web-based courses are
distribution Modular Scaffolding
Modular Scaffolding Modular scaffolding PDM Universal scaffolding system plettac-pl PDM Application A characteristic feature of plettac PDM system is the use of wedge joint which provides quick and safe
Our HSEEQ Training Programs Internationally Accredited Courses
Our HSEEQ Training Programs Internationally Accredited Courses Sr# Qualification/Course Title Awarding Body Duration (Days) Oil and Gas Safety 1 International Technical Certificate in Oil & Gas Operational
NATIONAL COMPETENCY STANDARD
NATIONAL COMPETENCY STANDARD WSQ Framework : WSH Professionals Competency Category : Plan and review of WSH Competency Code : WP-PR-302C-1 Competency Unit : Coordinate WSH legal compliance measures Competency
Buildings Department Safety and Inspection Requirements
Buildings Department Safety and Inspection Requirements Presented by Andrey Vishev, Chief of NYCDOB BEST Squad at the 28th Annual North-East Regional Tri-Sectional (NY-NJ-PA) Industrial Hygiene Conference
HAWAII ADMINISTRATIVE RULES TITLE 12 DEPARTMENT OF LABOR AND INDUSTRIAL RELATIONS SUBTITLE 8 DIVISION OF OCCUPATIONAL SAFETY AND HEALTH PART 3
HAWAII ADMINISTRATIVE RULES TITLE 12 DEPARTMENT OF LABOR AND INDUSTRIAL RELATIONS SUBTITLE 8 DIVISION OF OCCUPATIONAL SAFETY AND HEALTH PART 3 CONSTRUCTION STANDARDS CHAPTER 121.2 FALL PROTECTION 12-121.2-1
Safety & Environmental Training 2010 Course Catalog
Safety & Environmental Training 2010 Course Catalog.com Copyright 2010 COURSE CATALOG What we offer: Online Safety Training Courses for Construction, Healthcare, General and Manufacturing Industry for
SCAFFOLDING - Part 2 SELF INSPECTION CHECKLIST
OPTIONAL INFORMATION Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: SCAFFOLDING - Part 2 Instructions: This checklist covers some of the regulations issued
Lifting Appliances of Ships and Offshore Installations
CCS Rule Change Notice For: Lifting Appliances of Ships and Offshore Installations Version: May, 2016. RCN No.1 Effective date: 19 May, 2016 Beijing CONTENTS Chapter 3 CRANES, LIFTS, RAMPS AND SELF-LOADING