PROFESSIONAL SUMMARY POFESSIONAL EXPERIENCE. MUHAMED THAYYUB Abu Dhabi Phone:

Transcription

1 MUHAMED THAYYUB Abu Dhabi Phone: An experienced MEP Engineer having more than 5 years of experience in the field of MEP design, coordination, Construction management, Quality Assurance and Testing and Commissioning. Have work on different types of Projects including residential building, airport terminal, villas and community developments. Expertise in Designing in HVAC, Water supply, Drainage, Fire Fighting and Electrical. Expertise in reviewing of shop drawings, material submittals Expertise in the installation and testing and commissioning of the MEP Systems Expertise in the quality inspections at site and finding ofnon-conformities. Expertise in the requirements of ESTIDAMA project compliance as per PVRS and PBRS. Detail oriented & organized with excellent planning, analytical & interpersonal skills. PROFESSIONAL SUMMARY POFESSIONAL EXPERIENCE COMPANY: - American Consultancy Office LLC. Working as MEP Consultants from July Present Duties and responsibilities Heat Load Calculations (Manual method, Excel format, HAP Software), Duct Designing (Velocity reduction method & Constant friction method), Arriving BOM/ BOQ, Pump Selection (Total Head calculation, BHP and HP calculation), Fan Selection (Total Static pressure calculation, BHP and HP calculation), DX piping & Chilled water piping(open piping and Closed piping system), Ventilation and Exhaust systems (Toilet, Kitchen, Basement Area, Parking area, Stair-well pressurization etc), Accessories selection for AHU, Pumps, Chillers etc, On site experience. Process piping engineering as per ASME B 31.3 Pipe sizes, Schedule No. Review of Contract / Design drawing and rise of RFI (request for information) where deficiencies or ambiguities are identified. Review of shop drawings, material submittal and quality of sub contractor s work with the contract specification / drawings / Estidama compliance / authority regulations and ignition of field notices where deficiencies or ambiguities are identified. Conduct the required technical / coordination meetings to boost the site progress and quality of work. Preparation of MEP coordination drawings and RCP (reflected ceiling plan). Preparation of testing and commissioning schedule and reports as per project plan and project requirements. Undertake inspection of the mechanical works for Contractor s adherence to the approved shop drawings and ADCE specification, good working practices and construction schedule. Conduct inspection for Mechanical works as per the ITP along with MEP Contractor by completion of works (HVAC, FIRE FIGHTING, PLUMBING, LPG, SWIMMING POOL, GARBAGE CHUTE). Strictly follow up & chase the sub-contractors to complete the project as per target program & in budget cost.

2 Preparation of daily and monthly based MEP construction report. Site Meeting with ADCE and clients. Coordination among the contractors during the site work progress. Installation and testing commissioning of water supply and drainage system (Portable water network by PPR Piping inclusive of transfer pumps and booster pumps, solar/electric/central water heater and sanitary outlets and mixers. Drainage network by UPVC piping inclusive of manhole schedule with invert level and cover level in coordination with municipality reference levels and submersible pumps). Installation and testing commissioning of firefighting system(sprinkler system, hose reel system with fire pumps "Jockey, electrical & diesel" and fire alarm incorporation with zone control valves,os&y valves, flow sensor, alarm check valve assembly and dry riser system with breeching inlet and landing valves). Installation and testing commissioning of clean agent/novec fire suppression system Working knowledge on all the low current system, power and light system. Working with Access Control system, BMS system,cetral battery system, light and power system,earthing protection system, load schedule, Façade Lighting system, Fire Alarm System, Intruder System, Master clock system, Public address system, Security System, SMATV system, Structured cable system,lv & HV Gear system, Audio and Video Intercom system and CCTV system. Installation and testing commissioning of HVAC System (direct expansion system, chilled water system, and ventilation system, smoke management system with all related ducting, piping and controls. Installation and testing commissioning of central LPG System (copper piping with PRDP, solenoid vales, auto shut off valve, isolation valves and deluge system accordance with UAE civil defense regulations and guidelines). Installation and testing commissioning of Garbage chute system. Installation and testing commissioning of swimming pool system (filtration pumps, sand filters UV treatment system, chemical dosing system and water temperature control system with Heat cool pump) Undertake final project snagging and prepare list of defects fo rcontractor s action. Monitor and promote health and safety on the site. If required stop the construction works if unsafe practices are being followed COMPANY: - Silver Coast Construction and Boring LLC. Working as MEP Coordinator From February 2017 July Review of Contract / Design drawing and rise of RFI (request for information) where deficiencies or ambiguities are identified. Review of shop drawings, material submittal and quality of sub contractor s work with the contract specification / drawings / Estidama compliance / authority regulations and ignition of field notices where deficiencies or ambiguities are identified. Conduct the required technical / coordination meetings to boost the site progress and quality of work. Preparation of MEP coordination drawings and RCP (reflected ceiling plan). Preparation of testing and commissioning schedule and reports as per project plan and project requirements. Undertake inspection of the mechanical works for Contractor s adherence to the approved shop drawings and ADCE specification, good working practices and construction schedule. Conduct inspection for Mechanical works as per the ITP along with MEP Contractor by completion of works (HVAC, FIRE FIGHTING, PLUMBING, LPG, SWIMMING POOL, GARBAGE CHUTE). Strictly follow up & chase the sub-contractors to complete the project as per target program & in budget cost. Preparation of daily and monthly based MEP construction report. Site Meeting with ADCE and clients.

3 Coordination among the contractors during the site work progress. Working knowledge on all the low current system, power and light system. Working with Access Control system, BMS system,cetral battery system, light and power system,earthing protection system, load schedule, Façade Lighting system, Fire Alarm System, Intruder System, Master clock system, Public address system, Security System, SMATV system, Structured cable system,lv & HV Gear system, Audio and Video Intercom system and CCTV system. Installation and testing commissioning of water supply and drainage system (Portable water network by PPR Piping inclusive of transfer pumps and booster pumps, solar/electric/central water heater and sanitary outlets and mixers. Drainage network by UPVC piping inclusive of manhole schedule with invert level and cover level in coordination with municipality reference levels and submersible pumps). Installation and testing commissioning of firefighting system(sprinkler system, hose reel system with fire pumps "Jocky, electrical & diesel" and fire alarm incorporation with zone control valves,os&y valves, flow sensor, alarm check valve assembly and dry riser system with breeching inlet and landing valves). Installation and testing commissioning of clean agent/novec fire suppression system Installation and testing commissioning of HVAC System (direct expansion system,chilled water system, ventilation system, smoke management system with all related ducting, piping and controls. Installation and testing commissioning of central LPG System(copper piping with PRDP, solenoid vales, auto shut off valve, isolation valves and deluge system accordance with UAE civil defense regulations and guidelines). Installation and testing commissioning of Garbage chute system. Installation and testing commissioning of swimming pool system (filtration pumps, sand filters UV treatment system, chemical dosing system and water temperature control system with Heat cool pump) Undertake final project snagging and prepare list of defects fo rcontractor s action. Monitor and promote health and safety on the site. If required stop the construction works if unsafe practices are being followed. COMPANY: - Khiralla Central Air Conditioning Est Working as MEP ENGINEER from February 2015 July 2017 Duties and Responsibilities Heat Load Calculations (Manual method, Excel format, HAP Software), Duct Designing (Velocity reduction method & Constant friction method), Arriving BOM/ BOQ, Pump Selection (Total Head calculation, BHP and HP calculation), Fan Selection (Total Static pressure calculation, BHP and HP calculation), DX piping & Chilled water piping(open piping and Closed piping system), Ventilation and Exhaust systems (Toilet, Kitchen, Basement Area, Parking area, Stair-well pressurization etc), Accessories selection for AHU, Pumps, Chillers etc. Process piping engineering as per ASME B 31.3 Pipe sizes, Schedule No. Planning and programming of MEP works in accordance with the main contractors program from time to time. Coordinate and liaise with consultant to have inspections carried out at various stages with respect to project MEP works. Well experienced in Design programs, Heat Load Calculation, Pump Head Calculation, Fan Head Calculation, Duct Design, Pipe Design, Air Volume Calculation for Ventilation System,

4 Firefighting System,Water supply system,irrigation system, Landscaping system,drainage System, Storm water system,basic Knowledge on Electrical power and light system, Low current system, telephone system, BMS system and Auto Cad Drawings, etc. Provide support services to main contractor activities. Supervise activities associated with MEP inspections of work and subcontractor s work with respect to quality and progress. Review and prepares Method statements for various activities. Follow and maintain company standard of Quality in accordance with the Company Quality System requirements. Plan and schedule the work and effectively organize the site / facilities in order to meet the agreed program of deadline. Supervise and monitor the site MEP labor force through the general foreman / supervisors. Resolve all MEP related issues on site. Working knowledge on all the low current system, power and light system. Working with Access Control system, BMS system,cetral battery system, light and power system,earthing protection system, load schedule, Façade Lighting system, Fire Alarm System, Intruder System, Master clock system, Public address system, Security System, SMATV system, Structured cable system,lv & HV Gear system, Audio and Video Intercom system and CCTV system. To oversee the selection and requisition of materials for use in the construction. To advise on technology and modifications required for a simpler and cost saving mechanism. To prepare the proper documentation for the completion of work and obtain approval from the client after their inspection. Prepare / review O & M manuals. Execution of the complete HVAC systems.(ductable split, Ductable package, roof top unit, chiller, cooling plant, primary and secondary pump set of chilled water circulation, chemical dosing and all related ducting and piping and controls) Material order and delivery follow up for the assigned projects Time scheduling for projects. Efficient allocation of resources for the different projects Responsible for all resources such as manpower, machinery/equipments are properly and effectively utilized to maintain the planned productivity. Materials take off for the site. Coordination with duct fabricating factories for order and delivery. Monitoring and controlling material at store as per site requirement. Preparation of daily progress report and reporting to the senior project manager. Co-ordinate with MEP contractor and civil contractor regarding the coordination issues at site. Coordination with consultant on completion of the work for inspection. Ensure that safety procedure /rules are adequately implemented. Attending the weekly progress/technical meeting arranged by main contractor Site Meeting with consultants and clients. UVA - HVAC Consultants Bangalore, India From May 2006 to May 2008 Designation: Design Engineer. Heat Load Calculations (Manual method, Excel format, HAP Software), Duct Designing (Velocity reduction method & Constant friction method), Arriving BOM/ BOQ, Pump Selection (Total Head calculation, BHP and HP calculation), Fan Selection (Total Static pressure calculation, BHP and HP calculation),

5 DX piping & Chilled water piping(open piping and Closed piping system), Ventilation and Exhaust systems (Toilet, Kitchen, Basement Area, Parking area, Stair-well pressurization etc), Accessories selection for AHU, Pumps, Chillers etc. Process piping engineering as per ASME B 31.3 Pipe sizes, Schedule No. Planning and programming of MEP works in accordance with the main contractors program from time to time. Coordinate and liaise with consultant to have inspections carried out at various stages with respect to project MEP works. Major Projects Handled VVIP Terminal-Al Ain International Airport Client: - Ministry of Presidential Affairs Consultant: -Dar Al Handasah Sadiyath Island Projects- E013 Tunnel Client: - Tourism Development & Investment Company Consultant: - CHSS Engineering Ruwais Housing Complex Client: - ADNOC Consultant: - Dar Al Handasah Dubai Parks Lagoon Phase-1 Client: - Dubai Parks and Resorts Consultant: - Consultant HSS. City Pharmacy Client: - City Pharmacy Consultant: -Al Aamara & Al Sharqia Consultants Engineering. PGC 325 Client: - Precedential Guards & Command Consultant: - Al Salam Consultancy.

6 Academic Qualifications o B.Tech Mechanical Engineering o Diploma - Mechanical Engineering o ITI IN HVAC Software Skills Drafting Software- AutoCAD 2D Design Software Solid Works and Autodesk, HAP Version 5, MCQUAY Duct and Pipe Sizer. Engineer Analysis Software -ANSYS MS Office.