PTI CERTIFICATION PROGRAM OF CERTIFICATION OF PLANTS PRODUCING UNBONDED SINGLE STRAND TENDONS. Plants Certified as of: December 8, 2017

Transcription

1 PTI CERTIFICATION PROGRAM OF CERTIFICATION OF PLANTS PRODUCING UNBONDED SINGLE STRAND TENDONS Plants Certified as of: Launched in 1989, the Post-Tensioning Institute (PTI) program for Certification of Plants Producing has been developed to provide independent certification of a plant s extrusion and/or fabrication process and its capability to produce standard and/or encapsulated unbonded single strand tendons. This certification program also includes evaluation of calibration practices for jacks and gauges used for stressing single strand tendons. The program is applicable to all facilities whether fixed or mobile. The certification of a plant under this program indicates that the plant and the personnel are capable of producing unbonded single strand tendons in conformance with the Post- Tensioning Institute s Specification for. The certification program extends only to the process for extrusion and/or fabrication procedures and materials within the examined plant, and is expressly not intended to cover procedures or events subsequent to shipment of tendons to the job site. Plants whose fabrication and/or extrusion process is currently certified by PTI are listed on the following pages. The current certification status of any plant can be verified by visiting PTI s website at or by contacting PTI directly.

2 PTI MANUAL FOR CERTIFICATION OF PLANTS PRODUCING UNBONDED SINGLE STRAND TENDONS Taken from Section 4.3 Certification " A plant will be certified if all of the following criteria are met: Certified The Plant receives an overall grade score of eighty (80) or higher in each inspection category (2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8 or 2.9) Conditionally Certified The plant receives an overall grade score of seventyfive (75) or higher and no individual category (2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, or 2.9) has a score below seventy (70). Certification Suspended The plant receives an overall grade score less than seventy five (75), an individual category(2.1, 2.2, 2.3, 2.4, 3.1, 3.2, 3.3, 3.4 or 3.5) has a score below seventy (70), fails the inspection. This status will remain in place until the plant requests and the independent inspection agency completes a re inspection according to Section 4.4, until the appeal process outlined in Section 4.6 is resolved, or until the plant is decertified. When a plant receives an overall grade score of seventy-five to seventy-nine (75-79), the plant's certification is conditional upon receiving a grade score of eighty (80) or higher in each inspection category on the subsequent unannounced inspection. If the plant does not receive a grade score of eighty (80) or higher in each inspection category on the subsequent unannounced inspection, the plant will be decertified." Table of Contents: PTI Plant Certification Status Changes - Page 3 Unbonded Tendon Certified Plants - Pages 4-6 Unbonded Tendon Conditionally Certified Plants - Page 7 Unbonded Tendon Certification Suspended Plants - Page 8

3 PTI Unbonded Tendon Plant Certification Status Changes Plant Dywidag Systems International USA, Inc. Date of Change Location Type and Category of Certification 7/22/2017 Pompano Beach, FL IA Certified Structural Technologies, Inc. 7/22/2017 Pompano Beach, FL IA Change in Certification Status Change from IIA to IA Certification Status Certified Conditionally Certified Certification Suspended Decertified Definition The plant received an overall grade score of eighty (80) or higher in each inspection category in the last inspection. The plant received an overall grade score of seventy five (75) or higher and no individual category has a score below (70). The plant received an overall grade score less than seventy-five (75), an individual category score below seventy (70), or failed the inspection. The plant received an overall grade score below seventy five (75) or had an individual category score below (70) for two consecutive inspections. (updated 10/27/17)

4 Certified Company Alamillo Rebar, Inc. Alamillo Rebar, Inc. Amsysco, Inc. Builders Post-Tension, Inc. CCL USA, Inc. CMC Cable Conco Reinforcing Steel Continental Concrete Structures, Inc. Cumberland Post-Tension Dywidag-Systems International USA, Inc. Dywidag-Systems International USA, Inc. Dywidag-Systems International USA, Inc. Elkins Tri-Steel Gerdau Reinforcing Steel Houston Post-Tension, Inc. PTE Systems International, LLC R & S Manufacturing, LLC R & S Manufacturing, LLC Ready Cable, Inc. Ready Cable, Inc. Structural Technologies, LLC Structural Technologies, LLC Superior Post Tension, LLC Superior Post Tension, LLC Tech-Con Systems, Inc. Certified Company Fenix Post-Tension, Inc. PPT, Inc. Listing of Certified Plants Producing Type I - Extrusion and Fabrication Plant Type I; Category A - Both Standard and Encapsulated Systems City State Phone Benicia CA (707) Paramount CA (707) Romeoville IL (603) Houston TX (281) Jessup MD (301) Fontana CA (909) Benicia CA (707) Alpharetta GA (770) Benicia CA (707) Bolingbrook IL (630) Long Beach CA (562) Pompano Beach FL (954) Fort Worth TX (817) Santa Fe Springs CA (562) Houston TX (713) Hialeah FL (305) Midland GA (706) Suwanee GA (678) Fort Worth TX (817) Houston TX (713) Fort Worth TX (817) Springfield VA (703) Houston TX (832) Irving TX (972) Ontario CA (909) Pembroke Park FL (954) Phoenix AZ (602) Woodbridge VA (703) Phoenix AZ (602) Henderson NV (702) Slidell LA (985) Type I; Category B - Only Standard Systems City State Phone Hutto TX (512) Shreveport LA (318)

5 Listing of Certified Plants Producing Type I - Extrusion and Fabrication Plant Type I; Category C - Only Encapsulated Systems Central Steel, Inc. Lake Stevens WA (425) LMS Post-Tensioning Systems, Ltd. Surrey BC (604) Type II - Fabrication Only Plant Type II; Category A - Both Standard and Encapsulated Systems Builders Post-Tension DFW, Inc. Haltom City TX (817) Harris Rebar North Carolina, Inc. Lumberton NC (910) Phoenix Post Tension Surprise AZ (702) PTC, Inc. Everett WA (425) PT USA Houston TX (713) Leander TX (512) Structural Technologies, LLC Pompano Beach FL (305) Type II; Category B - Only Standard Systems Consolidated Reinforcement, L.P. Austin TX (512) Consolidated Reinforcement, L.P. Belton TX (254) Consolidated Reinforcement, L.P. Haltom City TX (817) Consolidated Reinforcement, L.P. San Antonio TX (210) Las Vegas Post Tension Las Vegas NV (702) Post-Tension Technologies, LLC Montgomery AL (334) Ready Cable, Inc. Round Rock TX (512) Ready Cable, Inc. San Antonio TX (210) San Antonio TX (210) Superior Post Tension, LLC Tucson AZ (520) Type II; Category C - Only Encapsulated Systems Conco Reinforcing Steel Rochester WA (425) Rose City Rebar & Post-Tensioning Co. Portland OR (503)

6 Listing of Certified Plants Producing Type III - Extrusion Only Plant (No Fabrication) Type III - Extrusion Only Plant Consolidated Reinforcement, LP Luling TX (830) Polyform, Inc. Salem OR (503) TYCSA, PSC Santander Spain

7 Listing of Certified Plants Producing Conditionally Certified Type I; Category A - Extrusion and Fabrication of Conditionally Certified Company City State Phone None

8 Listing of Certified Plants Producing Certification Suspended Type I; Category A - Extrusion and Fabrication of Certification Suspended Company City State Phone None