Network Rail Approved Products

Transcription

1 Network Rail Approved Products Buried Cable Routes & UTX Fixed Telecom Networks

2 Document Contents UTX & Buried Cable Routes Fixed Telecom Networks & RAILduct Cable Trough & Station Platforms Certification Cubis Systems has Network Rail certification covering 3 product ranges. These are available on request UTX & Buried Cable Products for constructing under track crossings and linear buried duct runs Access Chamber system Complete systems with spigots for easy connection Complete chamber with AX-S Concrete Infill Cover PA05/05091 PA05/00635 PA05/02301 PA05/04067 Under Track Crossing and Buried Cable Routes Fixed Telecom Networks Product Codes This document details the product information as illustrated in the example below: Description Description 2 Cubis Code PADS code Ordering Information With 4-Way (105mm) spigots PADS code: 087/ a b c d With 6-Way (105mm) spigots PADS code: 087/ With 9-Way (105mm) spigots PADS code: 087/ Complete chamber with AX-S Composite Cover With 4-Way (160mm) spigots PADS code: 087/ For pricing, order codes and any other information, contact the UK Sales Office. Telephone: +44 (0) sales@cubis-systems.com Universal Items Concrete-Infill Cover Lifting Key ACLKT Composite Cover Lifting Key ACLKSK With 4-Way (105mm) spigots PADS code: 087/ e f g h With 6-Way (105mm) spigots PADS code: 087/ With 9-Way (105mm) spigots PADS code: 087/ With 4-Way (160mm) spigots PADS code: 087/ For additional 150mm sections, see page 6 Access Chamber specification Chamber Type Clear Opening Depth Cover Type Base CUBIS Code PADS Code Concrete-Infill Locking Key ACLKTK a ULTIMA 1310 x mm 4-Way Concrete [B125 loading] Standard Base SYULD IR04TBA0C 087/ b ULTIMA 1310 x mm 6-Way Concrete [B125 loading] Standard Base SYULD IR04TBA0C 087/ c ULTIMA 1310 x mm 9-Way Concrete [B125 loading] Standard Base SYULD IR04TBA0C 087/ d ULTIMA 1310 x mm 4-Way (XL) Concrete [B125 loading] Standard Base SYULDX IR04TBA0C 087/ e ULTIMA 1310 x mm 4-Way Composite [12.5 tonne vertical loading] Standard Base SYULD CR04LBE8C 087/ f ULTIMA 1310 x mm 6-Way Composite [12.5 tonne vertical loading] Standard Base SYULD CR04LBE8C 087/ g ULTIMA 1310 x mm 9-Way Composite [12.5 tonne vertical loading] Standard Base SYULD CR04LBE8C 087/ h ULTIMA 1310 x mm 4-Way (XL) Composite [12.5 tonne vertical loading] Standard Base SYULDX CR04LBE8C 087/

3 UTX & Buried Cable Continued MONObox POLYVAULTS UTX & Buried Cable Continued POLYVAULT Chamber ONLY 915mm x 915mm PADS code: 087/ Complete chambers, supplied with: - Concrete Infill frame and cover (B125) - ABS Base Plate - Step Irons B125 Concrete-Infill Cover ONLY Galvanised Steel Frame FCCIMP R0TB002 PADS code: 087/ Base Plate ONLY Black ABS CPPV C PADS code: 087/ Base Plate ONLY Heavy Duty black HDPE CPPV E PADS code: 087/ Complete POLYvault Chamber 1220mm x 1220mm PADS code: 087/ Complete POLYvault Chamber 1530mm x 1220mm PADS code: 087/ Units Single Duct Adapters 4-Way DUDMD WAY-BKCD00000 PADS code: 087/ Way DUDMD WAY-BKCD00000 PADS code: 087/ Way DUDMD WAY-BKCD00000 PADS code: 087/ Way XL (160mm) DUDMD4-XLP04WAY-BKCD00000 PADS code: 087/ Chamber sizes are reflective of the CLEAR OPENING to the inside of the chamber Other clear opening sizes are available Please Contact Us for more information Different Depths POLYvault chambers can be manufactured and are approved in the following depths: 470mm 560mm 660mm 760mm 910mm 1015mm 1120mm 1220mm 1320mm 1420mm 1525mm 1625mm 1728mm 1830mm 1930mm 2032mm 2134mm 2235mm 2340mm 2440mm Double Spigots DUDMD WAY-GRDA00000 PADS code: 087/ DUDMD4-00A.24.0-BKDS00000 PADS code: 087/ DUDMD WAY-GRDA00000 PADS code: 087/ DUDMD6-00A.24.0-BKDS00000 PADS code: 087/ DUDMD WAY-GRDA00000 PADS code: 087/ DUDMD9-00A.24.0-BKDS00000 PADS code: 087/ DUDMD4-XLA24.05-BKDA00000 PADS code: 087/ DUDMD4-XLA.24.0-BKDS00000 is a multiple duct system, manufactured by Cubis Systems, used for constructing under track or road crossings (UTX/URX), bridge crossings and linear routes. Duct banks are built by connecting nominal 1 metre long sections, either by a steel clip or a push-fit system. There is also a range of accessories that offer flexibility in construction. is manufactured from Nitrogen foamed-high Density Polyethylene, which offers high strength-to-weight properties, resulting in a product that has high crush-resistance but can be lifted by a single person (all parts are below 25kg). Push-Fit Assembly Method The System 4, 6 or 9 way Options Each duct space is equivalent to 110mm single duct (160mm option available in 4 way) Each section is 1120mm long (lay length is 1070mm) Units have socket (female) and spigot (male) joints and are connected by clip-fix or push-fit Accessories to manage common bends, duct configurations and for interfaces with traditional single ducts and access chambers Double Sockets Y Lateral 22.5 Y Lateral for 160mm flexible duct 45 Y Lateral for 160mm flexible duct 22.5 Y Lateral for 110mm flexible duct 45 Y Lateral for 110mm flexible duct Flexible Duct Coil lengths can be supplied as either 50m or 100m Spring Clips - STEEL CLIP ONLY 600 per box DUDMD4-00A.24.0-BKDB00000 PADS code: 087/ Rubber Gasket - STEEL CLIP ONLY 100 / 75 per box 100 / Box ACDMD WAY-00DG00000 DUDMD6-00A.24.0-BKDB00000 PADS code: 087/ DUDMD9-00A.24.0-BKDB00000 PADS code: 087/ DUDMD4-XLA.24.0-BKDB00000 AC PIPE PADS code: 087/ AC PIPE PADS code: 087/ ACDM BKDF00000 (160mm) ACDM DC00000 ACDM DC00000 ACDM DC00000 ACDM DC00000 For more information on, please request the cable protection guide. 4 5

4 Fixed Telecom Network Access chamber systems for Fibre Joint Bays, Cable Storage or UTX PA05/02301 The modern alternative to concrete catchpits for trackside drainage PA05/04067 Complete Chambers Complete Chambers Also available with full grate cover Enquire for more details Access chamber with B125 concrete cover 1310mm x 610mm x 662mm SYUL IR04TBA0C PADS code: 054/ Parts Access chamber with 12.5T composite cover 1310mm x 610mm x 656mm SYUL CR04LBE8C PADS code: 054/ Drainage Catchpit mm x 380mm x 900mm SYULCP PG07LA00C PADS code: 057/ Additional access chamber sections: 1160 x 380mm x 150mm CPULRS Pipe dimensions can be specified at point of order Drainage Catchpit mm x 600mm x 900mm SYULCP PG07LAE8C PADS code: 057/ Additional access chamber sections: 1200 x 600mm x 150mm CPULRS Station Platforms Access chambers for lighting, power and other applications STAKKAbox ULTIMA section 1310mm x 610mm x 150mm CPULRS PADS code: 054/ STAKKAbox ULTIMA base 1310mm x 610mm x 160mm CPULBS PADS code: 054/ RAILduct A lightweight yet structurally sound cable trough RAILduct Unit Total size: 391mm (w) x 300mm (d) x 1000mm (l) Working area: 236mm x 200mm x 1000mm Concrete-Infill Cover 610mm x 610mm COCI B001 PADS code: 054/ Galvanised Steel Frame to Suit 1310mm x 610mm x 52mm Product Code: SYDR BKOOLA001 T-Piece Code: DUDRDT BK000A000 Composite Cover 600mm x 600mm COCOMP BE81 PADS code: 054/ Galvanised Steel Frame to Suit 1310mm x 610mm x 30mm FOFS CSR70B002 Holds trial certificate STAKKAbox Modula access chambers are commonly used on station platforms to provide access to services. MODULA consists of sectional, preformed rings that are available in a wide range of sizes. The most typically requested are shown on the right. Cubis has the ability to manufacture access covers in a variety of clear openings, depths and loading requirements. Other sizes and chamber products are available. Please contact us or visit our website - Access Covers Internal Clear Opening Length Width Depth Weight (kg) kg kg kg kg kg kg Please enquire for additional sizes Fabricated units to overcome horizontal and vertical bends in the track can be manufactured on request. Recessed Composite Concrete-Infill 6 7

5 Driven by Innovation Cubis is Europe s leading manufacturer of network access chamber and ducting systems, used in the construction of infrastructure networks for rail, telecoms, water, construction and power markets. Cubis has developed an innovative approach in an old-fashioned industry. This has been achieved by developing quality products which replace traditional construction materials, like bricks and concrete, with lightweight plastics incorporating intelligent design features. These can then be installed faster and ultimately save our customers both time and money. Contact us: Head Office: 4 Silverwood Industrial Estate, Lurgan, Co. Armagh, BT66 6LN, Northern Ireland Cubis manufactures preformed network access chamber systems STAKKAbox, AX-S access covers, multiple duct system and RAILduct cable trough at its manufacturing sites throughout the UK and Ireland these products are exported to more than 25 countries throughout the World. At Cubis we pride ourselves on delivering technical customer support, new innovation, product quality and the highest levels of customer satisfaction. Telephone: +44 (0) info@cubis-systems.com