DR. MOHD. KAMARUDDIN BIN ABD. HAMID

Transcription

1 DR. MOHD. KAMARUDDIN BIN ABD. HAMID PhD. (Chem. Eng.) (DTU), M.Eng. (Chem. Eng.) (UTM), B.Chem.Eng. (Hons.)(UTM), A.M.I.Chem.E. (UK), Grad.I.E.M., M.M.S.E.T., C.E.M. (AEMAS) Summary TEACHING Total Subjects M.Sc. Bachelor Bachelor Part-time Diploma Total Credit Hours M.Sc. Bachelor Bachelor Part-time Diploma Total Credit Hours (minus lab and projek sarjana muda): 145 RESEARCH Total Projects Principal Investigator Project Member Contract research 39 projects 7 projects 25 projects 7 projects (RM2,722,969) (RM312, 000) (RM1,834,087) (RM576,882) PUBLICATIONS Total Publications ISI/WOS Journals SCOPUS -indexed Journals Nonindexed Journals Books Book Chapters Proceedings Others Citations: 156 (Scopus) 323 (Google scholar) h-index: 7 (Scopus) 8 (Google scholar) Total Supervision SUPERVISION Graduated Ongoing: 61 Students 5 PhD 1 M.Phil 11 M.Eng. 31 B.Eng. 9 PhD 4 M.Phil. ADMINISTRATION Total Committee International National University Faculty Department

2 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] Staff ID: 9311 I/C No.: Date / Place of Birth: Citizenship: Home address: Languages: Marital Status: MOHD. KAMARUDDIN BIN ABD. HAMID IT and Marketing Manager Process Systems Engineering Centre (PROSPECT) Senior Lecturer Department of Chemical Engineering Faculty of Chemical and Energy Engineering Principal Researcher Research Institute of Sustainable Environment (RISE) Universiti Teknologi Malaysia UTM Johor Bahru, Johor, MALAYSIA. Certified Energy Manager ASEAN Energy Management Accreditation Scheme (AEMAS) PERSONAL DETAILS 26th. April, 1977 / Membakut, Sabah, Malaysia. Malaysian Tel: (6) Fax: (6) Mobile: (6) kamaruddinhamid@utm.my Website: Facebook: SCOPUS Author ID: ResearcherID: F ORCID: No. 34, Jalan Pulai Indah 10/3, Taman Pulai Indah, Johor Bahru, Johor, MALAYSIA. Mobile Phone: +(6) Malay (excellent), English (excellent), Arabic (reading). Married with two sons. Muhammad Afiq Zakwan Muhammad Adam Zarif Wife: DR. NORAZANA BINTI IBRAHIM Senior Lecturer, Department of Energy Engineering, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, UTM Johor Bahru, Johor, MALAYSIA. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 2

3 CURICULLUM VITAE November 2017 ACADEMIC BACKGROUND (My years as a student have significantly contributed to my self esteem, confidence, professional ethos and technical expertise, in chemical engineering, particularly in the process integration (process-controller design), process modelling, simulation and control) Ph.D of Engineering (Chemical) Title of Thesis: Model-Based Integrated Process Design and Controller Design of Chemical Processes. Supervisors: Rafiqul Gani and Gurkan Sin, Technical University of Denmark (DTU) Master of Engineering (Chemical) Title of Thesis: Multiple Faults Detection Using Artificial Neural Networks. Supervisor: Arshad bin Ahmad, Universiti Teknologi Malaysia (UTM) Bachelor of Engineering (Chemical) (Hons.) Universiti Teknologi Malaysia (UTM) American Degree Program (ADP), PPP/ITM Shah Alam, Selangor, Malaysia. ESL, First and Second Year, Chemical Engineering AREA OF EXPERTISE Energy Integrated Distillation Columns Sequence Energy Efficient Chemical Processes: Distillation Columns Sequence, Crude Distillation Unit. Sustainable Integrated Process Design and Control: Reactor, Distillation Column. Integrated Process Design and Control: Reactor, Distillation Column, Heat Exchanger Networks, Micro-Bioreactor, Energy-Integrated Distillation Columns, Reactive Distillation Column. Process Modelling and Analysis using Computational Fluid Dynamic: Industrial Fluidized Bed Polymerization Reactor, Proton Exchange Membrane Electrolyzer Process Modeling, Simulation and Control: Aspen HYSYS, MATLAB/Simulink Biofuel Production: Pyrolysis Kinetic Reaction Modeling Other Expertise: Proficient in operating Chemical Engineering Process Simulators such as Aspen HYSYS, Aspen DISTIL and Aspen HX-NET. Proficient in using MATLAB/Simulink. Proficient in Microsoft Word, Excel, Power Point, Visio, Visual Basic, Windows and Apple Mac. Proficient in using Macromedia Flash, Macromedia Dreanweaver, Adobe Photoshop, Adobe InDesign and Joomla. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 3

4 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] AWARDS AND HONORS RECEIVED 21. FKK UTM Excellent Service Award 2015 (Task Force Anugerah Kualiti Akademik). 20. FKK UTM Excellent Service Award 2015 (Task Force EAC Audit). 19. Best of the Best Award Innovative Practices in Higher Education Expo (I-PHEX2015) 18. Gold Medal Innovative Practices in Higher Education Expo (I-PHEX2015) 17. Bronze Medal INATEX Bronze Medal BioMalaysia & Bioeconomy Asia Pacific UTM Excellent Service Award FKK UTM Excellent Service Award Malaysian Federal Scholarships Award (Ph.D. program) UTM Excellent Service Award The Most Active E-Learning Subject in UTM (2005/2006-2). 10. UTM/PTP Scholarships (M. Eng. program) Dean s List Award June 2001 (4 th. Year, B.Eng.Chemical) FKKKSA. 8. Dean s List Award Feb 2001 (3 rd. Year, B.Eng.Chemical) FKKKSA. 7. Head of PPP Award Spring 1997 (2 nd. Year, ADP Chem.Eng.) PPP/ITM. 6. Honors List Award Fall 1997 (2 nd. Year, ADP Chem. Eng.) PPP/ITM. 5. Honors List Award Summer 1997 (2 nd. Year, ADP Chem. Eng.) PPP/ITM. 4. Honors List Award Spring 1997 (2 nd. Year, ADP Chem. Eng.) PPP/ITM. 3. Honors List Award Fall 1996 (1 st. Year, ADP Chem. Eng.) PPP/ITM. 2. Honors List Award Summer 1996 (1 st. Year, ADP Chem. Eng.) PPP/ITM. 1. Honors List Award Spring 1996 (1 st. Year, ADP Chem. Eng.) PPP/ITM. PROFESSIONAL MEMBERSHIPS / ASSOCIATIONS 8. Member, Persatuan Saintis Muslim Malaysia (PERINTIS). Membership Number: Certified Energy Manager, ASEAN Energy Manager Accreditation Scheme (AEMAS). Certificate No.: CEM-MY Member, American Chemical Society (ACS) since Membership Number: Member, Malaysian Society for Engineering and Technology (MySET) since Membership Number: Member, the American Institute of Chemical Engineers (AIChE) since Membership Number: Associate Member, the Institution of Chemical Engineers (IChemE) since Membership Number: Graduate Member, the Institution of Engineers Malaysia (IEM) since Membership Number: G Graduate Engineer, Board of Engineers Malaysia (BEM) since Membership Number: 36936R. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 4

5 CURICULLUM VITAE November 2017 ADMINISTRATION AND ADDITIONAL RESPONSIBILITIES Total Committee: 87; International: 23 committee; National: 8 committee; University: 13 committee; Faculty: 28 committee; Department: 15 committee. Academic: Administration: Senior Lecturer, Department of Chemical Engineering, Faculty of Chemical & EnergyEngineering IT and Marketing Manager of PROSPECT Other responsibilities: Principal Researcher of Research Institute of Sustainable Environment (RISE) Ofiice of Deputy Vice-Chancellor of Research and Innovation Universiti Teknologi Malaysia, UTM Johor Bahru, Johor, MALAYSIA. Tel: Fax: kamaruddin@cheme.utm.my Website: District Liason Officer, Institut Inovasi Strategik Johor (IISJ) Kulai R&D Manager, Sabah English Aspiration Society (SEAS) Director, American Chemistry Society (ACS) Southern Malaysia Member, Universiti Teknologi Malaysia Shine Team (UTMShine) Fellow Researcher, Process Systems Engineering Centre (PROSPECT), Research Institute for Sustainable Environment (RISE), UTM. Trainer, Process Operation, Control & Troubleshooting Trainer, Distillation Operation, Control & Troubleshooting Head, Consultancy projects Head, Research projects Assistant Chairman, Faculty of Chemical Engineering PhD viva-voce Examiner, UTM Research University Grants Proposal Examiner, Faculty of Chemical Engineering Master viva-voce Examiner, Faculty of Chemical Engineering postgraduate first stage proposal Member, EAC Self-Assessment Report (SAR) Committee, Department of Chemical Engineering Head, Panel of Process Control & Safety, Department of Chemical Engineering Course Owner, Process Control & Instrumentation Course Owner, Process Control Laboratory Examiner, PROSPECT PG Seminar Supervisor to postgraduate students Other past responsibilities: Deputy Chairman, The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016) R&D Manager of PROSPECT Committee Member, EAC Accreditation Task Force of Faculty of Chemical Engineering, UTM. Committee Member, Academic Publications of Faculty of Chemical Engineering, UTM. Editor-in-Chief, Annual Report of Faculy of Chemical Engineering, UTM Invited Lecturer, Faculty of Chemical Engineering and Energy Sustainability, Universiti Malaysia Sarawak (UNIMAS) Trainer, Executive Diploma Petroleum & Gas Technology, Universiti Malaysia Pahang (UMP) Executive Member, 6 th. International Conference on Process Systems Engineering (PSE Asia 2013). Editor, ASEAN Journal of Engineering Education (AJEE). Coordinator, Master of Chemical Engineering (Mixed Mode) Program, UTM. Committee Member, Society of Engineering Education Malaysia (SEEM). Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 5

6 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] Web Manager, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU). Teaching Assistant, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU). Web Manager, Faculty of Chemical and Natural Resources Engineering (FKKKSA), UTM. Member, Problem-Based Learning and Cooperative Learning Task Force, UTM. Member, Committee of Malaysian Journal of Engineering Education. Date Appointed: 21 st. Jul. 2003: 12 th. Jul. 2004: 20 th. Apr. 2006: 01 st. Jul. 2013: 26 th. Sept. 2011: 01 st. Sept. 2012: 01 st. May 2014: 11 th. May 2015: 01 st. Aug. 2015: Appointed as a Tutor. Appointed as a Lecturer. Confirmation status as a UTM permanent staff. Appointed as a Senior Lecturer. Appointed as an R&D Manager of PROSPECT Appointed as a Centre of Excellence Member Appointed as an R&D Manager of PROSPECT Appointed as a Fellow Researcher at PROSPECT, RISE Appointed as an IT & Marketing Manager of PROSPECT At International Level. 23. Jury, Indonesia Chem E-Car Competition (ICECC) Chemical Engineering Innovation Festival (CHERNIVAL) Surabaya, Indonesia, April 20-23, Reviewer, 8 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK, August 21-24, Reviewer, 8 th. International Conference on Applied Energy (ICAE2016). Beijing, China, October 8-11, Deputy Chairman, The 9 th Regional Conference on Chemical Engineering (RCChE 2016) inconjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016) 19. Reviewer, The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016) 18. Committee, 2 nd. Probiorefine Workshop. IBD, UTM Johor Bahru. Dec 7-8, Committee, 18 th. PRES 2015 Conference Process Integration, Modelling & Optimisation for Energy Saving and Pollution Reduction. Kuching, Sarawak. Aug 22-27, Reviewer, 12 th International Conference on Chemical and Process Engineering (ICheaP-12), Milan, Italy. May 19-22, Reviewer, 7 th. International Conference on Applied Energy (ICAE2015). Abu Dhabi, Mar , Reviewer, International Conference on Mathematics, Engineering & Industrial Applications (ICoMEIA 2014) 13. Editor, ASEAN Journal of Engineering Education (AJEE). 12. Reviewer, Chemical Engineering Transactions. 11. Reviewer, Journal of Transactions on Industrial Electronics. 10. Reviewer, 11 th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 5, Reviewer, 6 th. International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur. 8. Reviewer, 26 th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4 th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 6

7 CURICULLUM VITAE November Web Manager, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU). Jul Apr (Responsible for maintaining and updating website of CAPEC, DTU). 6. Teaching Assistant, Computer Aided Process-Product Engineering Center (CAPEC), Technical University of Denmark (DTU). Jul Apr Reviewer, 38 th. ASEE/IEEE Frontiers in Education Conference. Oct , Saratoga Springs, NY USA. 4. Reviewer, 37 th. ASEE/IEEE Frontiers in Education Conference. Oct , Milwaukee, WI USA. 3. Reviewer, 36 th. ASEE/IEEE Frontiers in Education Conference. Oct , San Diego, CA USA. 2. Committee Member, 1 st. International Conference on Natural Resources and Technology (INRET 2006), Putrajaya Malaysia. July Committee Member, Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, Malaysia. Dec At National Level. 8. Director, American Chemistry Society (ACS) Southern Malaysia 7. Facilitator, HIP International Outreach English Camp Membakut, Sabah, July 29-30, District Liason Officer, Institut Inovasi Strategik Johor (IISJ) Kulai 5. R&D Manager, Sabah English Aspiration Society (SEAS) 4. Reviewer, Jurnal Teknologi (Science and Engineering). 3. Reviewer, e-journal of PERINTIS (ejperintis). 2. Committee Member, Society of Engineering Education Malaysia (SEEM). 28 April April Committee Member, Malaysian Journal of Engineering Education June At University Level. 13. Member, Universiti Teknologi Malaysia Shine Team (UTMShine) 12. Fellow Researcher, Process Systems Engineering Centre (PROSPECT), Research Institute for Sustainable Environment (RISE), UTM. 11 May May Trainer, Executive Diploma Petroleum & Gas Technology, Universiti Malaysia Pahang (UMP) 10. Invited Lecturer, Modern Trends of Process Control, Faculty of Chemical Engineering and Energy Sustainability, Universiti Malaysia Sarawak (UNIMAS). 18 Dec Invited Lecturer, Process Simulation and Optimization Using Aspen HYSYS, Faculty of Chemical Engineering and Energy Sustainability, Universiti Malaysia Sarawak (UNIMAS). 25 Mar Examiner, UTM Research University Grants Proposal (Tier 1 & Encouragement Grant). 4 Dec Advisor, UTM Chem-E-Car Competition. 22 Mar Examiner, UTM Research University Grants Proposal (Tier 1 & Encouragement Grant). 19 Mar Full Research Member of Centre of Excellence (COE), Process Systems Engineering Centre (PROSPECT) UTM. 1 Sept Aug R&D Manager, Process Systems Engineering Centre (PROSPECT) UTM. 26 Sept Sept Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 7

8 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 3. Evaluator, Technical Proposal of ERGS, ScienceFund and RUGS for Sustainability Research Alliance. 2. Advisor, Perwakilan Mahasiswa Sabah (PERMAS), UTM July Member, Problem-Based Learning and Cooperative Learning Task Force, UTM July At Faculty Level. 28. Trainer, Distillation Operation, Control & Troubleshooting, Insititute of Bioproduct Development (IBD) 27. Trainer, Process Operation, Control & Troubleshooting, Insititute of Bioproduct Development (IBD) 26. Judge, Energy Sustainability Awareness Campaign (ESAC 2015). Faculty of Chemical and Energy Engineering. 16 Dec Fasilitator, FRGS Proposal Writing Workshop. 31 May Committee Member, Campus Sustainability (CS) FChE Global Plant Task Force. 1 Mar Feb Committee Member, Research, Innovation, Commercialisation & Entrepreneurial (RICE) FChE Global Plant Task Force. 1 Mar Feb Committee Member, EAC Accreditation Task Force. 1 Jan Dec Committee Member, FKK Academic Publication. 1 Jan Dec Invited Speaker, Process Simulation Seminar. 21 Mar Invited Speaker, Distillation Column Design Seminar. 2 Mar Invited Speaker, Research Methodology Seminar. 16 Apr Editor-in-Chief, FKK Annual Report Committee Member, FKK Academic Publication. 10 Jan Jan Committee Member, EAC Report Preparation Team. 25 May July Committee Member, Emergency Action Plant Team. 6 May May Auditor, Faculty 5S Practices. 11 Jul Chairman, Jawatankuasa Kebajikan, Sukan dan Sosial (JAKSIS). 1 Jan 31 Dec Program Coordinator, Master of Chemical Engineering (Mixed Mode). 2 Jan Jan Fasilitator, English Class for Supporting Staff, Faculty of Chemical Engineering. 5 Sept Sept Manager, Volleyball Man Team for the UTM Inter-Department Sport Carnival Apr Webmaster, Faculty of Chemical and Natural Resources Engineering. August July Editor/Designer, Buletin FKKKSA, Faculty of Chemical and Natural Resources Engineering Jun Head, Publicity Section, JawatanKuasa Kebajikan dan Rekreasi Staff (JAKRIS), FKKKSA Jun Organizing Committee, Kejohanan Futsal Tertutup FKKKSA 2005 organized by JAKRIS. 18 July Organizing Committee, FKKKSA Sport Carnival 2004 organized by JAKRIS. 16 Aug-15 Sept Organizing Committee, Sambutan Bulan Kemerdekaan ke-47 dan Kempen Mengibar Jalur Gemilang di FKKKSA August Member, Faculty Quality Assurance Committee, Group 3 Section 5 and Jan Jan Chairman, FKKKSA Post Graduate Society for Session 2003/2004. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 8

9 CURICULLUM VITAE November 2017 At Department Level. 15. Member, EAC Self-Assessment Report (SAR) Committee, Department of Chemical Engineering 14. Course Owner, SKTK 3564 Process Control & Instrumentation 13. Course Owner, SKTK 4751 Process Control Laboratory 12. Head, Panel of Process Control & Safety, Department of Chemical Engineering 11. Academic Advisor, for 3 rd. Year Chemical Engineering Student Academic Advisor, for 2 nd. Year Chemical Engineering Student Academic Advisor, for 1 st. Year Chemical Engineering Student Supervisor, Industrial Training. 22 Jul 4 Sept Course Owner, SKKK3144: Process Control and Instrumentation. 1 Jan Dec Academic Advisor, for 4 th. Year Chemical Engineering Student Academic Advisor, for 3 rd. Year Chemical Engineering Student Academic Advisor, for 2 nd. Year Chemical Engineering Student Academic Advisor, for 1 st. Year Chemical Engineering Student Secretariat, Quality Assurance Task Force, Chemical Engineering Department Jun Marketing Manager, External Relation Task Force, Chemical Engineering Department. 10 Apr Apr Feb 2017 Now Feb 2016 Jan 2017 Aug 2015 Feb 2016 CAREER PATH & EXPERIENCE IT & Marketing Manager, Process Systems Engineering Centre (PROSPECT), UTM Trainee Engineer, Lahad Datu Edible Oils Sdn. Bhd. IT & Marketing Manager, Process Systems Engineering Centre (PROSPECT), UTM May 2014 Aug 2015 R&D Manager, Process Systems Engineering Centre (PROSPECT), UTM Sept 2012 Aug 2015 COE Member, Office of Deputy Vice-Chancellor of Research and Innovation Aug 2011 Sept 2013 R&D Manager, Process Systems Engineering Centre (PROSPECT), UTM Jul 2011 Now May 2011 Jun 2011 Senior Lecturer, Department of Chemical Engineering, UTM Lecturer, Department of Chemical Engineering, UTM. Jul Apr PhD. Student, Technical University of Denmark. Jul Jul Jul Jul Lecturer, Department of Chemical Engineering, UTM Tutor, Department of Chemical Engineering, UTM Research Officer, Chemical & Biotechnology Focus Group, Research Management Center, UTM M.Eng. Student, Universiti Teknologi Malaysia. Apr. May 2001 Trainee Engineer, Chemical Engineering Pilot Plant (CEPP), UTM. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 9

10 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] RESEARCH ACTIVITIES (I have been a researcher in various projects. Some are R&D based and some commercialization based. This is important to keep up-to-date and in trend with the advancement of the latest science and technology and later, it is as important that we know how to commercialize the product of the developed research). Total Projects: 39 (RM2,722,969); Principal Investigator: 7 projects (RM312, 000); Project Member: 25 projects (RM1,834,087); Contract research: 7 projects (RM576,882) PUBLIC FUNDINGS (from government agencies) Principal Investigator 7. Title: A New Framework for Analyzing Sustainability of Energy Efficient Distillation Columns Sequence. Sponsor: UTM Research University Grant (RUG) Flagship (RM50,000). Cost Centre No.: Q.J G68. Period: 1 Dec Nov Status: On-going 6. Title: A Tool for Predicting Refined Bleached Deodorized Palm Oil (RBDPO) Quality using Partial Least Squares Regression (PLSR). Sponsor: UTM Research University Grant (RUG) Tier 1 (RM49,900). Cost Centre No.: Q.J H67. Period: 15 Dec Mei Status: Completed with progress and final report. 5. Title: Thermodynamic Study of Driving Force and Energy Integration Characterization for Energy Efficient Natural Gas Liquids Fractionation Process. Sponsor: Ministry of Education, Fundamental Exploratory Research Scheme Grant (RM84,100). Cost Centre No.: R.J F435. Period: 15 July Dec Status: Completed with progress and final report. 4. Title: A New Tool for Designing Energy Efficient Distillation Columns. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM40,000). Cost Centre No.: R.J H39. Period: 1 April Sept Status: Completed with progress and final report. 3. Title: A New Model-Based Tool for Flexible and Operable Heat Exchanger Network. Sponsor: Ministry of Higher Education, Exploratory Research Grant Scheme (RM46,000). Cost Centre No.: R.J L036. Period: 15 June June Status: Completed with progress and final report. 2. Title: Sustainable Integrated Process-Controller Design of Distillation Systems. Sponsor: UTM Research University Grant (RUG) Tier 2 (RM22,000). Cost Centre No.: Q.J J30. Period: 1 May April Status: Completed with progress and final report. 1. Title: Sustainable Integrated Process-Controller Design of Reactor Systems. Sponsor: UTM Research University Grant (RUG) New Academic Staff (NAS) (RM20,000). Cost Centre No.: R.J P051. Period: 1 May April Status: Completed with progress and final report. Project Member 25. Title:.Integrated Industrial Site Planning for Minimizing Resource Utilization and Pollution. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 10

11 CURICULLUM VITAE November 2017 Sponsor: Fundamental Research Grant Scheme (FRGS), MOHE (RM115,000). Cost Centre No.: R.J F918. Period: 1 Jun May Status: On-going. Leader: Sharifah Rafidah Wan Alwi 24. Title:.Refined Bleached Deodorised Palm Oil (RBDPO) Quality Prediction Tool Using Principal Component Analysis (PCA). Sponsor: UTM Research University Grant (RUG) Tier 2 (RM20,000). Cost Centre No.: Q.J J39. Period: 1 Oct Dec Status: On-going. Leader: Kamarul Asri Ibrahim. 23. Title:.Production Decision Support System for Batch Processes. Sponsor: UTM Research & Development Fund (RM20,000). Cost Centre No.: R.J J233. Period: 1 Jul Sept Status: Ended. Leader: Sharifah Rafidah Wan Alwi. 22. Title:. Determination of Mixing Time for Homogeneous Mixing of Different Grades of Liquified Petroleum Gas (LPG) in a non-stirred Tank. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM45,620). Cost Centre No.: Q.J H48. Period: 1 Jul Jun Status: On-going. Leader: Norazana Ibrahim. 21. Title:. Development.of Online System: Shipping Emissions Accounting (SEA) and Emissions Improvement Measures (EIM) for Port of Tanjung Pelepas Sponsor: Lembaga Pelabuhan Johor (RM80,000). Cost Centre No.: R.J B226. Period: 1 Apr Dec Status: On-going. Leader: Sharifah Rafidah Wan Alwi. 20. Title:. An Integrated Pinch Analysis Framework for Low Carbon Industrial Site Planning. Sponsor: UTM Research University Grant (RUG) Flagship (RM50,000). Cost Centre No.: Q.J G40. Period: 15 Jan Jan Status: On-going. Leader: Sharifah Rafidah Wan Alwi. 19. Title:. Deodoriser Troubleshooting in Palm Oil Refining using Fuzzy Logic. Sponsor: Ministry of Science, Technology and Innovation (MOSTI) E-Science Grant (RM100,000). Cost Centre No.: R.J S130. Period: 1 Nov Oct Status: On-going. Leader: Khairiyah Mohd. Yusof. 18. Title:.A New Framework for Designing Optimal Heat Exchanger Network Considering Inherent Safety and Operability Aspects. Sponsor: UTM Research University Grant (RUG) Matching Grant (RM37,200). Cost Centre No.: Q.J M77. Period: 1 Aug Jul Status: Ended. Leader: Sharifah Rafidah Wan Alwi. 17. Title:.Industrial Waste Water Minimization Along Sungai Johor Basin. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 11

12 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] Sponsor: UTM Research University Grant (RUG) Flagship (RM35,000). Cost Centre No.: Q.J G13. Period: 1 Mar Feb Status: Completed with progress and final report. Leader: Sharifah Rafidah Wan Alwi. 16. Title:.Physico-chemical properties study and Phenolic recovery analysis of Malaysia s biomasses derived pyrolysis oil. Sponsor: Fundamental Research Grant Scheme (FRGS), MOHE (RM72,900). Cost Centre No.: R.J F654. Period: 1 Dec Nov Status: Completed with progress and final report. Leader: Norazana Ibrahim. 15. Title:. Flash Pyrolysis of Malaysia s Biomasses for Potential Production of Bio-Fuels. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM65,556). Cost Centre No.: Q.J H10. Period: 1 Apr Mar Status: Completed with progress and final report. Leader: Norazana Ibrahim. 14. Title:. Total Site Heat Integration for Continuous and Variable Supply and Demand System. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM55,000). Cost Centre No.: Q.J H35. Period: 1 Apr Mar Status: Completed with progress and final report. Leader: Sharifah Rafidah Wan Alwi. 13. Title:. Current Status of Green Growth in Organisation of Islamic Conference (OIC) Countries. Sponsor: UTM Research University Grant (RUG) Matching Grant (RM84,480). Cost Centre No.: Q.J M20. Period: 1 May Apr Status: Completed with progress and final report. Leader: Zainuddin Abdul Manan. 12. Title: Experimental and Numerical Analysis on Turbulent Flame Acceleration Characteristics and Behaviour in Pipe. Sponsor: Ministry of Education, Fundamental Research Grant Scheme (RM89,000). Cost Centre No.: R.J F330. Period: 16 Dec Dec Status: Completed with progress and final report. Leader: Rafiziana Md Kasmani. 11. Title: The Solubility of Misai Kucing Herbs in Solvents via a Combined Experimental and Modeling Approach. Sponsor: Ministry of Education, Fundamental Research Grant Scheme (RM94,500). Cost Centre No.: R.J F270. Period: 16 Dec Dec Status: Ended. Leader: Zainuddin Abd Manan. 10. Title:. MyPROS: A New Bench-Scale Flash Pyrolysis Technology for Bio-Oil Production from Malaysia s Biomasses. Sponsor: Ministry of Higher Education, Exploratory Research Grant Scheme (RM109,000). Cost Centre No.: R.J L128. Period: 1 Jun May Status: Completed with progress and final report. Leader: Norazana Ibrahim. 9. Title:. Computer-Aided Tool for Designing Operable, Flexible and Inherently Safer-Healthier Chemical Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 12

13 CURICULLUM VITAE November 2017 Reactor System. Sponsor: Ministry of Higher Education, Exploratory Research Grant Scheme (RM84,000). Cost Centre No.: R.J L106. Period: 1 Jun May Status: Completed with progress and final report.. Leader: Mimi Haryani Hassim. 8. Title:. An Integrated, Sustainable Palm Oil Production Supply Chain. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM115,000). Cost Centre No.: Q.J H55. Period: 1 Dec Dec Status: Completed with progress and final report. Leader: Zainuddin Abdul Manan. 7. Title:. Study of flame acceleration and deflagration to detonation transition in process piping. Sponsor: UTM Research University Grant (RUG) Tier 1 (RM120,591). Cost Centre No.: Q.J H41. Period: 1 Dec Dec Status: Completed with progress and final report. Leader: Rafiziana Md. Kasmani. 6. Title:. A Kinetic Model for Production of Biofuels of Malaysia s Biomasses via Flash Pyrolysis. Sponsor: UTM Research University Grant (RUG) Tier 2 (RM33,00). Cost Centre No.: Q.J J10. Period: May 2012 April Status: Completed with progress and final report. Leader: Norazana Ibrahim. 5. Title:.Thermogravimetric and Elemental Analyses Studies of Malaysia s Biomasses for Production of Biofuels via Flash Pyrolysis. Sponsor: Fundamental Research Grant Scheme (FRGS), MOHE (RM76,780). Cost Centre No.: R.J F129. Period: 1 April March Status: Completed with progress and final report. Leader: Norazana Ibrahim. 4. Title: Transforming Learning and Teaching in Higher Education: Developing Innovative Evidencebased Techniques for Transferring Skills in Effective Implementation of Cooperative Problem-Based Learning (CPBL) Among Lecturers. Sponsor: ERGS (RM 50,000). Period: Status: Completed with progress and final report. Leader: Khairiyah Mohd. Yusof. 3. Title: Sustainable Integrated Product-Process Design and Control for a Tailor-Made Green Diesel Process. Sponsor: UTM Research University Grant (RUG) Flagships (RM75,160). Cost Centre No.: Q.J G52. Period: August 2011 July Status: Completed with progress and final report. Leader: Zainuddin Abd. Manan. 2. Title: Development of Syllabus and Environment for Learning of Problem-Based Learning in the First Year Students. Sponsor: DPP UTM RM 5,000. Period: Status: Completed with progress and final report. Head: Khairiyah Mohd. Yusof. 1. Title: Development of On-line Process Fault Detection Software for Oleochemical Plant. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 13

14 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] Sponsor: IRPA RM 201,300 (Vot 74015). Period: Status: Completed with progress and final report. Head: Mohamed Wijayanuddin Ali. PRIVATE FUNDINGS (including contract research and consultancies) 7. Title: In-house training on advance pinch technology for maximising total site energy and utility cost having. Sponsor: Optimal Systesm Engineering Sdn. Bhd. (RM32,000). Cost Centre No.: R.J C071. Period: Oct Status: Completed. Leader: Zainuddin Abd Manan. 6. Title: Establish the Accounting Mehod for Ship Emissions. Sponsor: Lembaga Pelabuhan Johor. (RM40,000). Cost Centre No.: R.J C071. Period: 1 Jan. 30 Jun Status: Completed. Leader: Zainuddin Abd Manan. 5. Title: Design Gap Analysis for Fractionation and Distillation Plants Works. Sponsor: Evyap Sabun Malaysia Sdn. Bhd. (RM24,800). Reference: UTM/224/ESM/1014(Rev.1) Period: 15 Oct. 15 Nov Status: Completed. Leader: Zainuddin Abd Manan. 4. Title: Design and Optimization of Modernization and Efficient Operation of Energy Supply and Utilization Systems using Renewable Energy Sources and ICTs. Sponsor: University of Pannonia, Hungary (RM31,132). Cost Centre No.: R.J C061. Period: 1 July Jun Status: Completed. Leader: Zainuddin Abd Manan. 3. Title: HAZOP Consultation and Discussion and CADWorks Consultation and Software License Rental. Sponsor: Evyap Sabun Malaysia Sdn. Bhd. (RM148,750). Reference: UTM/001/EVYAP/0913 Period: 30 Sept Dec Status: Completed. Leader: Zainuddin Abd Manan. 2. Title: Draft-1 of the Green Technology Blueprint for the OIC Member Countries. Sponsor: Islamic Development Bank (RM211,200). Cost Centre No.: R.J B116. Period: 01 Sept Feb Status: Completed. Leader: Zainuddin Abd Manan. 1. Title: Retrofit of Shell MDS Plant for Utility Conservation using Pinch Analysis. Sponsor: Shell MDS (M) Sdn. Bhd. (SMDS) (RM95,000). Cost Centre No.: Vot 671. Status: Completed. Leader: Zainuddin Abd Manan. POSTGRADUATE PROJECTS 2. Position: PhD. Student. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 14

15 CURICULLUM VITAE November 2017 Title: Integration of Modelling, Design and Control for Efficient Operation of Chemical Processes. Sponsor: Malaysian MOHE and UTM Scholarships (Technical University of Denmark PhD. Project). Period: Status: Completed. Supervisors: Rafiqul Gani and Gurkan Sin. 1. Position: M.Eng. Student. Title: Multiple Faults Detection using Artificial Neural Networks. Sponsor: UTM/PTP Scholarships (Universiti Teknologi Malaysia M.Eng. Project). Period: Status: Completed. Supervisor: Arshad Ahmad. INTELLECTUAL PROPERTY RIGHTS (IPR) Total IPRs: 13; Copyrights (13) Copyrights 13. Mohd. Yusof, K., Hamid, M. K. A., Mustaffa, A. A., Zakaria, Z. Y. (2015). Case Study Production of Propylene Glycol in CHEM-TEX (M) Sdn. Bhd. (UTM.J.14.01/27.13/1JLD90(44) 4/8/ Hamid, M. K. A. and Ibrahim, N. (2015). Algorithm for Synthesizing Energy Efficient Distillation Columns Sequence for Natural Gas Liquids Fractionation Process (UTM.J.14.01/27.13/1JLD85(35) 26/3/ Hamid, M. K. A. and Ibrahim, N. (2014). Algorithm for Synthesizing Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process (UTM.J.14.01/27.13/1JLD78(71) 30/12/ Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control Algorithm for a Distillation Column (UTM.J.14.01/27.13/1JLD78(72) 30/12/ Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control Algorithm for an Extractive Distillation Column (UTM.J.14.01/27.13/1JLD78(70) 30/12/ Hamid, M. K. A. (2014). Teaching Material for Introduction to Process Control (UTM.J.14.01/27.13/1JLD67(9) 20/7/ Hamid, M. K. A. (2014). Teaching Material for Control of Chemical Processes (UTM.J.14.01/27.13/1JLD67(9) 20/7/ Hamid, M. K. A. (2014). Teaching Material for Development of Mathematical Model (UTM.J.14.01/27.13/1JLD67(9) 20/7/ Hamid, M. K. A. (2014). Teaching Material for Laplace Transform (UTM.J.14.01/27.13/1JLD67(9) 20/7/ Hamid, M. K. A. (2014). Teaching Material for Transfer Function (UTM.J.14.01/27.13/1JLD67(9) 20/7/ Hamid, M. K. A. (2014). Teaching Material for Response of First Order Systems (UTM.J.14.01/27.13/1JLD67(9) 20/7/ Hamid, M. K. A. (2014). Teaching Material for Second Order Systems (UTM.J.14.01/27.13/1JLD67(9) 20/7/ Hamid, M. K. A. (2014). Teaching Material for Dynamic Response Characteristics of More Complicated Systems (UTM.J.14.01/27.13/1JLD67(9) 20/7/2014. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 15

16 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] TEACHINGS ACTIVITIES (Most of my teaching loads since 2003 have been concentrated on Process Control and Dynamics subjects. However, I am also taking part in teaching other subjects.) Total Subjects: 56; M.Sc.: 12 subjects; Bachelor : 35 subjects; Bachelor Part-time: 6 subjects; Diploma: 3 subjects Total Credit Hours: 156; M.Sc.: 39; Bachelor : 88; Bachelor Part-time: 21; Diploma: 8 Total Credit Hours (minus lab and projek sarjana muda): 145 M.Sc. Process Plant Management 9. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: II 2015/2016 (Kuala Lumpur) Credit: 3 hours 8. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: I 2015/2016 (Kerteh) Credit: 3 hours 7. Subject: MKKL1133 Process Operation, Control and Troubleshooting Semester: II 2014/2015 (Kuala Lumpur) Credit: 3 hours 6. Subject: MKKL 1133 Process Operation, Control and Troubleshooting Semester: I 2014/2015 (Kerteh) Credit: 3 hours 5. Subject: MKKL 1133 Process Operation, Control and Troubleshooting Semester: I 2014/2015 (Kuala Lumpur) Credit: 3 hours 4. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: II 2013/2014 (Kerteh) Credit: 3 hours 3. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: II 2013/2014 (Kuala Lumpur) Credit: 3 hours 2. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: I 2013/2014 (Kerteh) Credit: 3 hours 1. Subject: MKK1133 Process Operation, Control and Troubleshooting Semester: I 2013/2014 (Kuala Lumpur) Credit: 3 hours M.Sc. (Chem. Eng.) DTU 3. Subject: Optimizing Plantwide Control (Teaching Assistant). Semester: Spring Credit: 4 hours 2. Subject: Risk Assessment in Chemical and Biochemical Industry (Teaching Assistant). Semester: Spring Credit: 4 hours 1. Subject: Process Design: Principles and Methods (Teaching Assistant). Semester: Spring Credit: 4 hours B.Eng. (Chemical) UTM 35. Subject: SKTK 1523 Introduction to Engineering (Section 04). Semester: I 2017/2018. Credit: 3 hours 34. Subject: SKTK 1511 Industrial Seminar and Profession (Section 05). Semester: I 2017/2018. Credit: 1 hour 33. Subject: SKKK 3144 Process Control and Instrumentation (Section 05). Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 16

17 CURICULLUM VITAE November 2017 Semester: II 2016/2017. Credit: 4 hours 32. Subject: SKKK 2133 Chemical Engineering Computation (Section 04). Semester: I 2015/2016. Credit: 3 hours 31. Subject: SKKK 3144 Process Control and Instrumentation (Section 03). Semester: II 2014/2015. Credit: 4 hours 30. Subject: SKKK 1023 Introduction to Engineering (Section 02). Semester: I 2014/2015. Credit: 3 hours 29. Subject: SKKK 3144 Process Control and Instrumentation (Section 05). Semester: II 2013/2014. Credit: 4 hours 28. Subject: SKF 3143 Process Control and Dynamics (Section 05). Semester: II 2013/2014. Credit: 3 hours 27. Subject: SKKK 2133 Chemical Engineering Computation (Section 05). Semester: I 2013/2014. Credit: 3 hours 26. Subject: SKF 3413 Process Control and Dynamics (Section 06) Semester: II 2012/2013. Credit: 3 hours 25. Subject: SKKK 2133 Chemical Engineering Computation (Section 07). Semester: I 2012/2013. Credit: 3 hours 24. Subject: SKF 4761 Process Control Laboratory (Section 05). Semester: II 2011/2012. Credit: 1 hour 23. Subject: SKF 3413 Process Control and Dynamics (Section 06) Semester: II 2011/2012. Credit: 3 hours 22. Subject: SKF 4761 Process Control Laboratory (Section 07). Semester: I 2011/2012. Credit: 1 hour 21. Subject: SKF 4761 Process Control Laboratory (Section 06). Semester: I 2011/2012. Credit: 1 hour 20. Subject: SKKK 1013 Statics. Semester: I 2011/ Subject: SKKK 1011 Seminar. Semester: I 2011/2012. Credit: 3 hours Credit: 1 hour 18. Subject: SKC 4824 Plant Design Project. Semester: II 2006/2007. Credit: 4 hours 17. Subject: SKC 5771 Process Control Laboratory. Semester: II 2006/2007. Credit: 1 hour 16. Subject: SKF 3413 Process Control and Dynamics. Semester: II 2006/2007. Credit: 3 hours 15. Subject: SKC 5771 Process Control Laboratory. Semester: I 2006/2007. Credit: 1 hour 14. Subject: SKC 4113 Process Control and Dynamics. Semester: I 2006/2007. Credit: 3 hours 13. Subject: SKC 4113 Process Control and Dynamics. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 17

18 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] Semester: II 2005/2006 Section 04. Credit: 3 hours 12. Subject: SKC 4113 Process Control and Dynamics. Semester: II 2005/2006 Section 02. Credit: 3 hours 11. Subject: SKC 5771 Process Control Laboratory. Semester: II 2005/2006. Credit: 1 hour 10. Subject: SKC 4826 Plant Design Project. Semester: I 2005/2006. Credit: 6 hours 9. Subject: SKC 5771 Process Control Laboratory. Semester: I 2005/2006 Section 03. Credit: 1 hour 8. Subject: SKC 5771 Process Control Laboratory. Semester: I 2005/2006 Section 01. Credit: 1 hour 7. Subject: SKC 4821 Computer-Aided Design. Semester: II 2004/2005. Credit: 1 hour 6. Subject: SKC 5771 Process Control Laboratory. Semester: II 2004/2005. Credit: 1 hour 5. Subject: SKC 4826 Plant Design Project. Semester: I 2004/2005. Credit: 6 hours 4. Subject: SKC 5771 Process Control Laboratory. Semester: I 2004/2005. Credit: 1 hour 3. Subject: SKC 4113 Process Control and Dynamics. Semester: I 2004/2005. Credit: 3 hours 2. Subject: SKC 5771 Process Control Laboratory. Semester: II 2003/2004. Credit: 1 hour 1. Subject: SKC 4113 Process Control and Dynamics. Semester: II 2003/2004. Credit: 3 hours Part Time B.Eng. (Chemical) SPACE 6. Subject: SKF 3413 Process Control and Dynamics. Semester: II 2013/2014. Credit: 3 hours 5. Subject: SKF 3413 Process Control and Dynamics. Semester: I 2011/2012. Credit: 3 hours 4. Subject: SKC 4826 Plant Design Project. Semester: II 2005/2006. Credit: 6 hours 3. Subject: SKC 4113 Process Control and Dynamics. Semester: II 2005/2006. Credit: 3 hours 2. Subject: SKC 4113 Process Control and Dynamics. Semester: II 2004/2005. Credit: 3 hours 1. Subject: SKC 4113 Process Control and Dynamics. Semester: II 2003/2004. Credit: 3 hours Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 18

19 CURICULLUM VITAE November 2017 Part Time Dip. Eng. (Chemical) SPACE 3. Subject: DKK 3343 Gas Processing and Petroleum Refining Technology. Semester: I 2006/2007. Credit: 3 hours 2. Subject: DKK 3352 Chemical Engineering Computation. Semester: II 2005/2006. Credit: 2 hours 1. Subject: DKK 3343 Gas Processing and Petroleum Refining Technology. Semester: I 2004/2005. Credit: 3 hours Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 19

20 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] SUPERVISION Total Supervision: 61 Students; Graduated: 5 PhD, 1 M.Phil, 11 M.Eng., 31 B.Eng.; Ongoing: 9 PhD, 4 M.Phil. Postgraduate Research Projects Main Supervisor PhD (Chemical Engineering) 8. Student: Muhammad Afiq bin Zubir. Co-Supervisor: Kamarul Asri bin Ibrahim Degree: PhD (ChemE). Title: Synthesis and Design Framework of Energy Efficient Distillation Based Separation Processes. Status: Ongoing, Sep Now. 7. Student: Munawar Zaman bin Shahruddin. Co-Supervisor: Kamarul Asri bin Ibrahim Degree: PhD (ChemE). Title: A New Framework for a Flexible and Operable Heat Integrated Distillation Columns Sequence. Status: Ongoing, Sep Now. 6. Student: Taram Satiraksa bin Wan Abdullah. Co-Supervisor: Ramlan bin Abd. Aziz Degree: PhD Industry (ChemE) Company: Vestigo Petroleum Sdn. Bhd. Title: Embrace Living Safety Concepts in the Prevention of Company s Process Safety Incident. Status: Ongoing, Feb Now. 5. Student: Ahmad Nafais bin Rahimi. Co-Supervisor: Kamarul Asri bin Ibrahim, Norazana binti Ibrahim Degree: PhD (ChemE). Title: Process Design and Control Analysis of Energy Efficient Distillation Columns Sequence. Status: Ongoing, Feb Now. 4. Student: Azmer bin Shamsuddin. Co-Supervisor: Kamarul Asri bin Ibrahim Degree: PhD Industry (ChemE) Company: Lahad Datu Edible Oils Sdn. Bhd.. Title: Refined Bleached Deodorised Palm Oil Product Quality Prediction Tool Using Statistical Methods. Status: Ongoing, Feb Now. 3. Student: Suraya Hanim binti Abu Bakar. Co-Supervisor: Sharifah Rafidah binti Wan Alwi. Degree: PhD (ChemE). Title: Flexible and Operable Heat Exchanger Networks. Status: Graduated, Feb Apr Student: Hamid Kazemi Esfeh. Degree: PhD (ChemE). Title: A Systematic Modeling and Design Optimization Framework for Proton Exchange Membrane Electrolyzer. Status: Graduated, Feb Jan Student: Vahid Akbari Baghbani. Degree: PhD (ChemE). Title: A Systematic Modeling and Design Optimization Framework for Fluidized Bed Polymerization Reactor. Status: Graduated, Aug Oct Main Supervisor M.Eng (Chemical Engineering) Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 20

21 CURICULLUM VITAE November Student: Nur Aqila binti Naseri. Degree: M.Phil (ChemE). Title: Synthesis and Design Framework of Energy Efficient Extractive Distillation System. Status: Ongoing, Sep Now. 6. Student: Faizul Hakim bin Elidor. Degree: M.Phil (ChemE). Title: Synthesis and Design Framework of Energy Efficient Flash System. Status: Ongoing, Sep Now. 5. Student: Mohd Aiman bin Mohd Noor. Co-Supervisor: Kamarul Asri bin Ibrahim. Degree: M.Phil (ChemE). Title: Process Operation Improvement in Palm Oil Refining. Status: Ongoing, Sep Now. 4. Student: Muhammad Zakwan bin Zaine. Co-Supervisor: Kamarul Asri bin Ibrahim. Degree: M.Phil (ChemE). Title: Sustainable Energy Efficient Distillation Columns Sequence. Status: Graduated, Sep Nov Student: Mohd Faris bin Mustafa. Co-Supervisors: Kamarul Asri bin Ibrahim, Noor Asma Fazli bin Abd Samad (UMP). Degree: M.Eng (ChemE). Title: Energy Efficient Distillation Columns Sequence. Status: Graduated, Aug May Student: Siti Aminah binti Zakaria. Co-Supervisor: Muhamad Rizza bin Othman (UMP). Degree: M.Eng (ChemE). Title: Sustainable Integrated Process Design and Control of Chemical Reactor Systems. Status: Graduated, Aug Apr Student: Mohamad Zulkhairi bin Nordin. Co-Supervisor: Muhamad Rizza bin Othman (UMP). Degree: M.Eng (ChemE). Title: Sustainable Integrated Process Design and Control of Distillation Column Systems. Status: Graduated, Aug Jun Main Supervisor M.Eng (Chemical Engineering) Mixed Mode and Taught Course 7. Student: Surentheran a/l Seragam Degree: M.Eng (ChemE-Taught Course). Title: Application of Lean Six Sigma in the Oil and Gas Industry: Transplus Stripper Column Energy Optimization and Sustenence. Status: Graduated, Feb Aug Student: Deepan Raj a/l Thangaraj Degree: M.Eng (ChemE-Taught Course). Title: Optimization of Temperature Variation in Bioreactor Through Plate Heat Exchanger Using Process Control System. Status: Graduated, Feb Feb Student: Nurul Akmar binti Mohd Zaberi. Degree: M.Eng (ChemE-Taught Course). Title: Ethanolamines Column Optimization Study. Status: Graduated, Feb Feb Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 21

22 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 4. Student: Hasnizam bin Abdullah. Degree: M.Eng (ChemE-Taught Course). Title: Wireless Spectrum Vibration Analysis for Remote Machinary over Multiple Communication Protocol. Status: Graduated, Feb Feb Student: Faizal bin Ahmad. Degree: M.Eng (ChemE-Taught Course). Title: Fault Tolerant Instrumentations in Process Plant Two Out of Three Voting System and Middle of Three Control. Status: Graduated, Feb Feb Student: Ahmad Azamuddin bin Ahmad Azizi. Degree: M.Eng (ChemE-Taught Course). Title: Evaluation of Batch Reactor Auxiliary Equipment Feasibility to Produce New Product Grade. Status: Graduated, Feb Feb Student: Sirajo Lawal. Co-Supervisor: Muhd Nazrul Hisham bin Zainal Alam. Degree: M.Eng (ChemE-Mixed Mode). Title: Integrated Process Design and Control of a Microbioreactor. Status: Graduated, Sep Jun Co-Supervisor PhD (Chemical Engineering) 6. Student: Nor Adhihah binti Rashid. Supervisor: Kamarul Asri bin Ibrahim. Degree: PhD (ChemE). Title: Palm Oil Product Quality Prediction Tool Using Multivariate Statistical Methods. Status: On-going, Sept Now 5. Student: Muhammad Fakhrul Islam bin Zahran. Supervisor: Kamarul Asri bin Ibrahim. Degree: PhD (ChemE). Title: Flexibility and Controllability Analyses of Energy Efficient Distillation Columns Sequence. Status: On-going, Sept Now 4. Student: Abdul Rasheed Abdul Rahman. Supervisor: Noor Shawal bin Nasri. Degree: PhD (ChemE). Title: Modelling and Simulation of Gas Separation Processes for Gas Processing Plant. Status: On-going, Feb Now 3. Student: Ademola Bolanle Raheem. Supervisor: Azman bin Hassan. Degree: PhD (ChemE). Title: Assessment of Potential Environmental Impact of Polyethylene Terephthalate (PET) Plastic Recycling. Status: On-going, Nov Now 2. Student: Tohid Nejad Ghaffar Borhani. Supervisor: Zainuddin bin Abd. Manan. Degree: PhD (ChemE). Title: Modelling and Simulation of Carbon Dioxide Removal by Using Promoted Potassium Carbonate Process. Status: Graduated, Jan Jun Student: Reza Marandi. Supervisor: Shahrir bin Hashim. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 22

23 CURICULLUM VITAE November 2017 Degree: PhD (ChemE). Title: Computational Fluid Dynamic Simulation of Gas Phase Ethyelene Ploymerization Reactors. Status: Graduated, Jan Aug Co-Supervisor M.Eng (Gas Engineering) 1. Student: Noorhaza binti Alias. Supervisor: Norazana binti Ibrahim. Degree: M.Eng. (Gas). Title: A New Bench-Scale Flash Pyrolysis technology for Bio-Oil Production from Malaysia s Biomasses. Status: Graduated Aug Sept Co-Supervisor M.Phil (Chemical Engineering) 1. Student: Nur Atikah binti Mohd Rosely. Supervisor: Kamarul Asri bin Ibrahim. Degree: M.Phil. (ChemE). Title: Palm Oil Product Quality Prediction Tool Using Hybrid of Principal Component Analysis and Partial Correlation Analysis. Status: Ongoing, Sep Now. Undergraduate Research Project B.Eng.Chem.(Hons.) 31. Student: Amirul Afiq Hamizan bin M. Roslan Title: Integration Tools for Supporting Process Design Analyses in Chemical Engineering. Status: Graduated, Feb Jan Student: Yuhan Moh Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Partial Correlation Analysis. Status: Graduated, Feb Jan Student: Parakashwaran Nair Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Singular Value Decomposition. Status: Graduated, Feb Jan Student: Mohamad Hanafi bin Noslan Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Principal Component Analysis. Status: Graduated, Feb Jan Student: Siti Qazalinda binti Sepuan Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Hotelling s T 2 -Singular Value Decomposition. Status: Graduated, Feb Jan Student: Nia Damiyathi binti Abdul Rawi Title: Refined Bleached Deodorized Palm Oil Quality Prediction Using Hotelling s T 2 -Principal Component Analysis. Status: Graduated, Feb Jan Student: Faizul Hakim bin Elidor Title: Steady State Sensitivity Analysis for Natural Gas Liquids Fractionation Sequences. Status: Graduated, Feb Jan Student: Muhammad Alif Asyraf bin Amin Title: Steady State Sensitivity Analysis for Hydrocarbon Mixture Separation Sequences. Status: Graduated, Feb Jan Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 23

24 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 23. Student: Nur Syamimi binti Jalil Title: Steady State Controllability Analysis for Aromatic Separation Sequences. Status: Graduated, Feb Jan Student: Muhammad Fakhrul Islam bin Zahran Title: Steady State Controllability Analysis for Hydrocarbon Mixture Separation Sequences. Status: Graduated, Feb Jan Student: Muhammad Fitri bin Saidi Title: Steady State Controllability Analysis for Natural Gas Liquids Fractionation Sequences. Status: Graduated, Feb Jan Student: Nur Atikah binti Mohd Rosely Title: Steady State Controllability Analysis of Cryogenic Distillation Sequences for Natural Gas Purification. Status: Graduated, Feb Jan Student: Aliudin bin Gotowo Title: Energy Efficient Distillation Columns Sequence for Natural Gas Liquids Fractionation Process. Status: Graduated, Feb Jan Student: Mohd Firdaus bin Azizan Title: Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. Status: Graduated, Feb Jan Student: Mohamad Faiz bin Mohd Yusoff Title: Sustainable Energy Efficient Distillation Columns Sequence for Natural Gas Liquids Fractionation Process. Status: Graduated, Feb Jan Student: Mohamad Ridhuan bin Nawi Title: Sustainable Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. Status: Graduated, Feb Jan Student: Mohamad Faizal bin Samsuddin Title: Sustainable Energy Efficient Distillation Columns Sequence for Aromatics Separation Process. Status: Graduated, Feb Jan Student: Mohamad Dzulfadzli bin Jais Title: Sustainable Integrated Process Design and Control for a Distillation Column. Status: Graduated, Feb Jan Student: Mohamad Zulkhairi bin Nordin Title: Sustainable Integrated Process Design and Control for an Extractive Distillation Column. Status: Graduated, Feb Jan Student: Mohd Jufri bin Zakaria Title: Sustainable Integrated Process Design and Control for a Continuous Stirred Tank Reactor. Status: Graduated, Feb Jan Student: Siti Nasihah binti Mohd Ali Title: Sustainable Integrated Process Design and Control for a Plug Flow Reactor. Status: Graduated, Feb Jan Student: Siti Aminah binti Zakaria Title: Sustainable Integrated Process Design and Control for a Packed Bed Reactor. Status: Graduated, Feb Jan Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 24

25 CURICULLUM VITAE November Student: Siti Norhanum binti Fadli Title: Simulation and Optimization of Diesel Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Apr Student: Muhammad Syafiq bin Adam Title: Simulation and Optimization of Ethanol Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Student: Cosmas bin Anjura Title: Simulation and Optimization of Ethane Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Student: Mohammad Shahir bin Abdullah Title: Simulation and Optimization of Butane Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Student: Mohd Badri Barid bin Abdullah Title: Simulation and Optimization of Ethanol Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Student: Nur Aifaa binti Azman Title: Simulation and Optimization of Jet Fuel Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Student: Farhana binti Aziz Title: Simulation and Optimization of Gasoline Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Student: Henry Insiong Title: Simulation and Optimization of Propane Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Student: Azmil bin Abdul Rahman Title: Simulation and Optimization of Methanol Autothermal Reformer for Fuel Cell Applications. Status: Graduated, Dec Nov Undergraduate Plant Design Project Supervisions. 7. Students: Nur Emieylia Sulaiman, Sti Nadzwa Rosnan, Mohd Sukri Mohd Yusof and Siti Fatehah Ali Ihsan. Degree: B.Eng. (Chemical) (Hons.) Title: Production of 100,000 MTA of Adipic Acid via Catalytic Oxidation. Status: Finished, Feb June Students: Ma Siew Voon, Siti Fatimah Meskam, Anis Syszwan Shuhaimi, Syed Nassrun Wafa Syed Jalaluddin and Mohd Zaizuki Zainal. Degree: B.Eng. (Chemical) (Hons.) Title: Production of 1752 kmta of RON97 Gasoline from Vacuum Gas Oil (VGO). Status: Finished, Feb June Students: Melvin Ng Eng Chen, Atiqah Abdul Aziz, Mohd Izzuddin Ahmad Shah and Surhanis Mohd Sukri. Degree: B.Eng. (Chemical) (Hons.) Title: Oil Palm-Based B100 Grade Biodiesel Production. Status: Finished, Feb June Students: Mohd. Zulkifli Mohamad Noor, Mohd. Zamri Ayub, Nik Suryati Nik Kub, Aida Rohayu Azali and Hamimah Satirah Mazlan. Degree: B.Eng. (Chemical) (Hons.) Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 25

26 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] Title: Production of 250,000 MTA High Octane Number of Gasoline from Liqufied Natural Gas. Status: Finished, Dec Apr Students: Rosli Ahmad, Mohd Zaki Saleh, Nurdin Darman and Nor Ratana Hapni Degree: B.Eng. (Chemical) (Hons.) Title: Production of 250,000 MTA Hydrogen from Methanol. Status: Finished, Dec April Students: Lim Chew Ching, Norafidah Mohammed, Zainatul Bahiyah Handani, Siti Mazhaida Mustapha and Hasniza Ibrahim Degree: B.Eng. (Chemical) (Hons.) Title: Production of 250,000 MTA Hydrogen from Liquefied Natural Gas. Status: Finished, Dec April Students: Ong Yoke Peng, Jusmaliza Emelia Ahmad, Khairun Nisah Abdul Kamadin, Mohd Khairul Azman Khalif and Mohd Najib Roslan Degree: B.Eng. (Chemical) (Hons.) Title: Production of 50,000 MTA Fuel Grade Ethanol from Municipal Solid Waste. Status: Finished, Dec April Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 26

27 CURICULLUM VITAE November 2017 UTM PhD Students Assistant Chairman POSTGRADUATE EXAMINATION/VIVA 3. Student: Chew Kew Hong Title: Total Site Heat Integration Considering Pressure Drops Year: Student: Liew Peng Yen Title: Total Site Heat Integration Tools for Continuous Variable and Demands System Year: Student: Aqeel Ahmed Bazmi Title: Optimization and Projection of Decentralized Energy Generation Based on Palm Oil Biomass UTM PhD Students Proposal Examiner 16. Student: Haslenda Abdul Sahak Title: Systematic Method for Inherent Safety Health Design Consideration throughout Process Design Life Cycle. Year: Student: Mismisuraya Meor Ahmad Title: Development of an Integrated Antioxidant Activity Prediction Model for Herbs Year: Student: Siti Nuurul Huda Mohd Azmin Title: Computer aided solvent design for optimal extraction of high-value active ingredients in Malaysian herbs Year: Student: Siti Sulaiha Sulaiman Title: Optimization of palm oils refining processes using hybrids of neural network-genetic algorithms and particle swarm-firefly algorithms Year: Student: Muhammad Saufi Tarmizi Title: Modelling Centralized Sewage Treatment Plant for Electricity Generation in Iskandar Malaysia Year: Student: Siti Akhtar Ishak Title: An Optimal Cement Plant Under Carbon Constraints Year: Student: Mohamad Asri Mahmood Title: Application Fault Detection and Diagnosis in Multiple Unit Operations using Multivariate Statistical Process Control Year: Student: Syazwani Ab Aziz Title: Modelling and Optimization of Electricity Generation from Biogas Production of Palm Oil Mill Effluent Year: Student: Saifaralina A. Jalil Title: Systematic Technique of Fugitive Emission Reduction in Chemical Process Industry Year: 2013 Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 27

28 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 7. Student: Amir Tabari Title: Optimal Design and Operation of Semicontinuous Azeotropic Distillation Process 6. Student: Abbas Azarpour Hassankiadeh Title: Heterogeneous dynamic modelling, simulation and optimization of PTA plant industrial hydropurification reactor 5. Student: Nor Erniza Mohammad Rozali Title: Power Pinch Analysis for Optimal Design of Hybrid Power Systems 4. Student: Saifaralina A. Jalil Title: Systematic Technique of Fugitive Emission Reduction in Chemical Process Industry 3. Student: Siti Akhtar Ishak Title: Mathematical Optimization using GAMS to Reduce CO2 Emissions from Cement Plant 2. Student: Phoon Li Yee Title: Establishment of Physiochemical Properties of Tailor-Made Green Diesel from Biomass 1. Student: Mohamad Asrul Mustapha Title: Sustainable Green Management Systems UTM PhD Students Proposal Chairman 4. Student: Chuo Sing Chuong Title: Extraction of Erytromycin Utilizing Sophorolipids Reverse Micellar System Year: Student: Wan Nurul Izyani Wam Mohd Zawawi Title: Synthesis and Characterization of Biocer as High Performance Nanocomposite Biocatalysts Year: Student: Mutahharah Mohd Mokhtar Title: Emissions from Coal-Fired Power Plant in Malaysia 1. Student: Abdullahi Mohammed Evuti Title: Treatment of Volatile Organic Compounds from Pharmaceutical Waste Water using Integrated Air Stripping and Non Thermal Plasma System Conversion to PhD Proposal Examiner 4. Student: Muhammad Saufi Tarmizi Title: Decentralized Sewage Treatment Plant for Enhancement of Green Technology in Iskandar Malaysia Year: Student: Nurul Sulaiha Sulaiman Title: Optimization of Palm Oil Refining Processes Year: Student: Nik Norashikin Nik Abd. Aziz Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 28

29 CURICULLUM VITAE November 2017 Title: Inherent Occupational Health Assesment for Chemical Batch Processes 1. Student: Syaza Izyani Ahmad Title: Designing Sustainability Index for Process Design State M.Eng. (Chemical) Viva Examiner 1. Student: Nik Norashikin Nik Abd Aziz Title: Inherent Occupational Health Assessment for Chemical Batch Processes. Year: 2014 M.Eng. (Chemical) Proposal Examiner 6. Student: Muhamad Nazrin Othman Title: Design Biogas Distributed Energy System Through Gas Cascade System Analysis (GASCA). Year: Student: Muhamad Reza Abbasi Title: Mathematical Model for Cost Effective Minimum Water and Energy Networks. Year: Student: Johnathan Har Sean Hou Title: Fugitive Emission Estimation from Storage Tank and Wastewater Treatment Units. Year: Student: Santha a/p Pandian Title: Computer Aided Design of Occupationally Healthier Chemical Processes. 2. Student: Nik Norashikin Nik Abd. Aziz Title: Inherent Occupational Health Assessment for Chemical Batch Processes. 1. Student: Menaka a/p Narayanasamy Title: Modelling of Diesel Engine and Performance Testing of Tailor-Made Green Diesel using Computational Fluid Dynamics. M.Eng. (Chemical) Proposal Chairman 1. Student: Hanna Ilyani Zulhaimi Title: Performance of Integrated System Combining Photo-Fenton and Membrane Bioreactor for Spent Caustic Wastewater. M.Eng. (Chemical) Mixed-Mode Dissertation 2 Examiner 12. Student: Ainur Munirah Hafizan Title: Heat integration with operability and safety consideration. Year: Student: Kee Mohd Rafique Kee Zainal Abidin Title: Two mathematical models of natural matter extraction by supercritical CO2. Year: Student: Khairunnisa Mohidin Title: Engine performance tests of tailor made green diesel blends. Year: 2014 Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 29

30 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 9. Student: Amin Rahmanian Title: Carbon Dioxide Capture from Reforming Gases using Modified Amine Solution with Acetic Acid. Year: Student: Busari Bolaji Ibrahim Title: A Graphical Cost-Screen Technique for Carbon Management. Year: Student: Isah Umar Abdullahi Title: A Numerical Method for Determining the Optimal Minimum Temperature Difference of Heat Exchanger Network. 6. Student: Meysam Davoody Title: Fuzzy and Hybrid Modeling of Supercritical Fluid Extraction of Pimpinella Anisum L. Seed. 5. Student: Azduwin Khasri Title: Slow Pyrolysis of Imperata Cylindrica in a Fixed Bed Reactor. 4. Student: Cici Maarasyid Title: A Graphical Approach for Cost Targeting of Heat Recovery Networks with Mixed Heat Exchanger Types. 3. Student: Mohsen Chezghani Title: A Graphical Method for Simultaneous Targeting and Design of Multiple Utility Systems. 2. Student: Yanwarizal Title: Continuous Individual Plot Curves Technique for Simultaneous Targeting and Design of a Mass Exchange Network. 1. Student: Chuah Wei Sze Title: Integration of Trigeneration System with Process using Segregated Problem Table Algorithm. M.Eng. (Chemical) Mixed-Mode Dissertation 2 Chairman 1. Student: Ali Moslehyani Title: Silver Ion Exchange Fillers Incorporated with Mixed Matrix Membrane for Antibacterial Application. M.Eng. (Chemical) Mixed-Mode Dissertation 1 Examiner 7. Student: Mehdi Rahmanian Title: Hydrogen Recovery Using Comercialized Activated Carbon Year: Student: Mohammadreza Dehghani Title: Integrated Maximum Water Recovery Design and Controller Year: Student: Mohammad Reza Abbasi Title: Cost effective minimum water and energy networks. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 30

31 CURICULLUM VITAE November Student: Cici Maarasyid Title: STEP method application in total site of industry. 3. Student: Pouye Panahi Title: Biodiesel Production from Algae Oil in Continuous Reactive Distillation Column by Ionic Solid. 2. Student: Jonathan Har Sean Hou Title: Fugitive Emission Estimation from Storage Tank and Wastewater Treatment Unit. 1. Student: Augustine Agha Oko Title: Sustainable Green Management System (SGMS) Focusing on the Creation of Green Footprint. M.Eng. (Chemical) Mixed-Mode Dissertation 1 Chairman 2. Student: Ali Bagheri Title: Formulation and Optimization of Ginger Niosome for Obesity Treatment. Year: Student: Amin Rahmanian Title: Investigating the effect of Polyethersulfone Halloysite Nanotubes Clay for Mercury Removal from Treated Water. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 31

32 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] PUBLICATIONS Total Publications: 169: ISI/WOS Journals (12), SCOPUS-indexed Journals (41), Non-indexed Journals (4), Books (2), Book Chapters (7), Proceedings (102), Others (1) Citations: 156 (Scopus), 323 (Google scholar); h-index: 7 (Scopus), 8 (Google scholar) ISI/WOS Journals 12. Balasundram, V., Ibrahim, N. Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., and Ali, R. r. (2018). Thermogravimetric Catalytic Pyrolysis and Kinetic Studies of Coconut Copra and Rice Husk for Possible Maximum Production of Pyrolysis Oil, Journal of Cleaner Production, 167, (IF: 5.715) 11. Esfeh, H. K., Azarafza, A., and Hamid, M. K. A. (2017). On the Computational Fluid Dynamics of PEM Fuel Cell (PEMFCs): An Investigation on Mesh Independence Analysis. RSC Advances, 7(52), (IF: 3.108) 10. Esfeh, H. K., and Hamid, M. K. A. (2016). Algebraic Form and New Approximation of Butler-Volmer Equation to Calculate the Activation Overpotential. Journal of Electrochemical Energy Conversion and Storage, 13(2), Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). Selection of Minimum Temperature Difference ( Tmin) for Heat Exchanger Network Synthesis Based on Trade-off Plot. Applied Energy, 162, (IF: 7.182) 8. Akbari, V., Borhani, T. N. G., Aramesh, R., Hamid, M. K. A., Shamiri, A., and Hussain, M. A. (2015). Evaluation of hydrodynamic behaviour of the perforated gas distributor of industrial gas phase polymerization reactor using CFD-PBM coupled model. Computers & Chemical Engineering, 82, (IF: 3.024) 7. Akbari, V., Borhani, T. N. G., Shamiri, A., Aramesh, R., Hussain, M. A., and Hamid, M. K. A. (2015). 2D CFD-PBM simulation of hydrodynamic and particle growth in an industrial gas phase fluidized bed polymerization reactor. Chemical Engineering Research and Design, 104, (IF: 2.538) 6. Akbari, V., Borhani, T. N. G., Shamiri, A., and Hamid, M. K. A. (2015). A CFD-PBM coupled model of hydrodynamics and mixing/segregation in an industrial gas-phase polymerization reactor. Chemical Engineering Research and Design, 96, (IF: 2.538) 5. Borhani, T. N. G., Akbari, V., Afkhamipour, M., Hamid, M. K. A., and Manan, Z. A. (2015). Comparison of Equilibrium and Non-Equilibrium Models of a Trayed Column for Post-Combustion CO2 Capture Using DEA-Promoted Potassium Carbonate Solution. Chemical Engineering Science, 122, (IF: 2.895) 4. Borhani, T. N. G., Hamid, M. K. A., and Manan, Z. A. (2015). Rate-Based Simulation and Comparison of Various Promoters for CO2 Capture in Industrial DEA-Promoted Potassium Carbonate Absorption Unit. Journal of Industrial and Engineering Chemistry, 22, (IF: 4.421) 3. Akbari, V., Borhani, T. N. G., Godini, H. R., and Hamid, M. K. A. (2014). Model-based analysis of impact of distributor on the performance of industrial polydisperse gas phase fluidized bed polymerization reactor. Powder Technology, 267, (IF: 2.942) 2. Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2010). A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process. Computers & Chemical Engineering, 34 (12), (IF: 3.024) 1. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Integration of Process Design and Controller Design for Chemical Processes using Model-Based Methodology. Computers & Chemical Engineering, 34 (5), (IF: 3.024) SCOPUS-indexed Journals 41. Balasundram, V., Ibrahim, N., Samsudin, M. D. H., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2017). Thermogravimetric Studies on the Catalytic Pyrolysis of Rice Husk. Chemical Engineering Transactions, 56, Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 32

33 CURICULLUM VITAE November Rosely, N. A. M., Rashid, N. A., Mohd Noor, M. A., Hawi, N. D. A., Sepuan, S. Q., Shamsuddin, A., Ibrahim, K. A., and Hamid, M. K. A. (2017). Product Sampling Time and Process Residence Time Prediction of Palm Oil Refining Process. Chemical Engineering Transactions, 56, Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Optimal Retrofit of Natural Gas Liquid Separation Direct Sequence and Feed Condition Sensitivity Analysis. Chemical Engineering Transactions, 56, Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2017). Catalytic Pyrolysis of Coconut Copra and Rice Husk for Possible Maximum Production of Bio- Oil. Chemical Engineering Transactions, 56, Sadikin, A. N., Yusof, K. M., Aziz, A. A., Hassim, M. H., Zakaria, Z. Y., Mustaffa, A. A., and Hamid, M. K. A. (2017). A Multi-Year Study of Professional Skills Development Among First Year Chemical Engineering Students. Chemical Engineering Transactions, 56, Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2017). The Effect of Catalyst Loading (Ni-Ce/Al2O3) on Coconut Copra Pyrolysis via Thermogravimetric Analyzer. Chemical Engineering Transactions, 56, Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Hydrocarbon Mixture Fractionation Direct Sequence Retrofiitting and Feed Condition Sensitivity Analysis. Chemical Engineering Transactions, 56, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2017). A Simple Case Study on Application in Synthesising a Feasible Heat Exchanger Network. Chemical Engineering Transactions, 56, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2017). Sensitivity Analysis of Industrial Heat Exchanger Network Design. Chemical Engineering Transactions, 56, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2017). An Industrial Case Study Application in Synthesising a Feasible Heat Exchanger Network. Chemical Engineering Transactions, 56, Zaine, M. Z., Mustafa, M. F., O., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2016). Sustainable Energy Efficient Distillation Columns Sequence Design of Aromatic Separation Unit. Jurnal Teknologi (Sciences & Engineering), 78(6-12), Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2016). Energy Efficiency Improvement for Natural Gas Liquds Direct-Splitter- Direct Sequence Fractionation Unit. Jurnal Teknologi (Sciences & Engineering), 78(6-12), Zaine, M. Z., Mustafa, M. F., Hassan, O., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2016). Energy Efficient Distillation Columns Analysis for an Aromatic Separation Process. Jurnal Teknologi (Sciences & Engineering), 78(3-2), Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement in the Natural Gas Liquids Fractionation Unit. Chemical Engineering Transactions, 45, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Initial Analysis on Heat Exchanger Networks of Fatty Acid Fractionation Plant to Optimize Energy Recovery and Controllability. Chemical Engineering Transactions, 45, Nordin, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Application of Sustainable Integrated Process Design and Control for Four Distillation Column Systems. Chemical Engineering Transactions, 45, Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Hydrocarbon Mixtures Separation Unit. Chemical Engineering Transactions, 45, Alias, N., Ibrahim, N., and Hamid, M. K. A., Hasbullah, H., Ali, R. R., and Kasmani, R. M. (2015). Investigation of Oil Palm Wastes Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. Energy Procedia, 75, Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 33

34 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 23. Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Effect of Delta Temperature Minimum Contribution in Obtaining an Operable and Flexible Heat Exchanger Network. Energy Procedia, 75, Zaine, M. Z., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2015). Minimum Energy Distillation Columns Sequence for Aromatics Separation Process. Energy Procedia, 75, Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. Energy Procedia, 75, Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Integrated Tool for Assessing Sustainability Index of Distillation Column Systems. Journal of Engineering Science & Technology, SI (3), Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficient Distillation Columns Sequence Using Driving Force Method. Modern Applied Science, 9 (7), Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Controllability Analysis on Delta Temperature Minimum to Obtain Operable and Flexible Heat Exchanger Networks. Applied Mechanics and Materials, 735, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Design target selection for heat exchanger network synthesis based on trade-off plot. Energy Procedia, 61, Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part II: parametric study. Energy Procedia, 61, Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance Part I: modelling and validation. Energy Procedia, 61, Mustafa, M. F., Abdul Samad, N. A., Ibrahim, K. A., and Hamid, M. K. A. (2014). Methodology development for designing energy efficient distillation column systems. Energy Procedia, 61, Alias, N., Ibrahim, N., and Hamid, M. K. A. (2014). Pyrolysis of empty fruit bunch by thermogravimetric analysis. Energy Procedia, 61, Alias, N., Ibrahim, N., Hamid, M. K. A., Hasbullah, H., Rasit Ali, R., Sadikin, A. N., and Asli, U. A. (2014). Thermogravimetric Analysis of Rice Husk and Coconut Pulp for Potential Biofuel Production by Flash Pyrolysis. The Malaysian Journal of Analytical Sciences, 18(3), Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Flexible and Operable Energy Integrated Distillation Column Systems. Applied Mechanics and Materials, 625, Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Continuous-Stirred Tank Reactor System. Applied Mechanics and Materials, 625, Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Distillation Column System. Applied Mechanics and Materials, 625, Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2014). Design and Fabrication of Bench- Scale Flash Pyrolysis Reactor for Bio-Fuel Production. Chemical Engineering Transactions, 39, Hasbullah, H., Mohamed, F., Ali, R. R., Ibrahim, N., Hamid, M. K. A., Salleh, W. N. W, and Yusof, N. (2014). Morphological Investigation of Alumina Asymmetric Membrane by Manipulating the Sintering Temperature Profile. Applied Mechanics and Materials, 606, Hamid, M. K. A. (2014). Development of a Sustainable Integrated Process Design and Control for Chemical Processes. Journal of Applied Sciences, 14(12), Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Flexible and Operable Heat Exchanger Networks, Chemical Engineering Transactions, 32, Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 34

35 CURICULLUM VITAE November Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., Ali, R. R., and Hasbullah, H. (2013). Experimental Investigation of Flash Pyrolysis Oil Droplet Combustion. Chemical Engineering Transactions, 32, Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. IFAC Proceedings Volume, 9 (1), Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2009). A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process. In: R. M. de Brito Alves, C. A., Oller de Nascimento and E. C. Biscia Jr. (Eds.). Computer Aided Chemical Engineering, 27 (Part A), Elsevier B. V., Amsterdam Hamid, M. K. A., Sin, G., and Gani, R. (2009). A New Model-Based Methodology for Simultaneous Design and Control of Reaction-Separation Systems with Recycle. In: J. Jezowski and J. Thullie (Eds.). Computer Aided Chemical Engineering, 26, Elsevier B. V., Amsterdam Non-indexed Journals 4. Nordin, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for an Extractive Distillation Column Systems. PERINTIS E-Journal, 4(2), Akbari, V., and Hamid, M. K. A. (2014). Prediction of Minimum Fluidization Velocity Using a CFD-PBM Coupled Model in an Industrial Gas Phase Polymerization Reactor. Journal of Engineering Science, 10, Hamid, M. K. A., Sin, G, and Gani, R. (2011). An overview of ICAS-IPDC A software for integrated process design and controller design of chemical processes. PERINTIS e-journal, 1, Abdullah, M. S., Hasbullah, H., Ibrahim, N., and Hamid, M. K. A. (2007). Simulation and Optimization of Butane Autothermal Reformer for Fuel Cell Applications. Journal of Chemical and Natural Resources Engineering, Vol. 2, Theses/Books 2. Hamid, M. K. A. (2011). Model-Based Integrated Process Design and Controller Design of Chemical Processes. PhD. Thesis, Technical University of Denmark (DTU). ISBN: Hamid, M. K. A. (2003). Multiple Faults Detection using Artifical Neural Networks. Master Thesis, Universiti Teknologi Malaysia (UTM). Book Chapters 7. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Three-Dimensional Sustainability Analysis for Integrated Process Design and Control for Separation of Benzene and Toluene Mixture. In: M. A. Hashim (ed.), ICGSCE 2014, Springer Science+Business Media Singapore ISBN: Zakaria, S. A., Zakaria, M. J., Othman, M. R., and Hamid, M. K. A. (2015). 3D Sustainability Analysis of Integrated Process Design and Control for Production of Cyclohexanone. In: M. A. Hashim (ed.), ICGSCE 2014, Springer Science+Business Media Singapore ISBN: Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., and Ali, R. R. (2013). Experimental Investigation of Combustion of Flash Pyrolysis Oil. In: Pogaku, R., Bono, A., Chu, C. (Eds.), Development in Sustainable Chemical and Bioprocess Technology, Springer, ISBN: Hamid, M. K. A. (2012). A Conceptual Example of the Integrated Process-Controller Design. In Hashim, H., Hassim, M. H., Wan Alwi, S. R. A. (Eds.), Efficient Sustainable Process, Penerbit UTM Press. ISBN: Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 35

36 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 3. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions for Reactor-Separator Systems with Recycle. In: M. M. El-Halwagi and A. A. Linninger (Eds.). Design for Energy and the Environment. Breckenridge, Colorado: CRC Press Hamid, M. K. A., Sin, G., and Gani, R. (2008). Integrated Process Design and Control of a Single Reactor System. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook 2008, DTU Chemical Engineering, Hamid, M. K. A., and Gani, R. (2007). Integration of Modelling, Design and Control for Efficient Operation of Chemical Processes. In: K. Dam-Johansen and M. Bojer. Graduate Schools Yearbook 2007, DTU Chemical Engineering, 3 6. Conference Proceedings 102. Rashid, N. A., Rosely, N. A. M., Noor, M. A. M., Shamsuddin, A., Hamid, M. K. A., and Ibrahim, K. A. (2017). Quality Prediction of Refined Bleached Deodorized Palm Oil (RBDPO) using Partial Least Square Regression Technique. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Zubir, M. A., Rahimi, A. N., Zahran, M. F. I., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Systematic Design of Energy Efficient Distillation Column for Azeotrope Mixture. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Rosely, N. A. M., Zahran, M. F. I., Shahruddin, M. Z., Zubir, M. A., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Olefin Mixture Direct Sequence Energy Retrofitting: Feed Compositions Sensitivity Analysis. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Rosely, N. A. M., Zahran, M. F. I., Shahruddin, M. Z., Zubir, M. A., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2017). Olefin Mixture Direct Sequence Retrofitting and Feed Composition Sensitivity Analysis. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Shahruddin, M. Z., Rahimi, A. N., Zubir, M. A., Zahran, M. F. I., Ibrahim, K. A., and Hamid, M. K. A. (2017). Energy Integrated Distillation Column Sequence by Driving Force Method and Pinch Analysis for Five Components Distillation. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Zahran, M. F. I., Rahimi, A. N., Zubir, M. A., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Control Properties of Driving Force Based Distillation Columns Design. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Zubir, M. A., Rahimi, A. N., Zahran, M. F. I., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Systematic Design of Energy Efficient Distillation Column for Alcohol Mixture. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Zahran, M. f. I., Rahimi, A. N., Zubir, M. A., Shahruddin, M. Z., Ibrahim, K. A., and Hamid, M. K. A. (2017). Relative Gain Analysis of Energy Efficient Hydrocarbon Separation Sequence. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Shahruddin, M. Z., Rahimi, A. N., Zubir, M. A., Zahran, M. F. I., Ibrahim, K. A., and Hamid, M. K. A. (2017). Energy Integrated Distillation Columns Sequence by Driving Force Method and Pinch Analysis. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Rashid, N. A., Rosely, N. A. M., Noor, M. A. M., Shamsuddin, A., Hamid, M. K. A., and Ibrahim, K. A. (2017). Forecasting of Refined Palm Oil Quality using Principal Component Regression. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2017). Catalytic Pyrolysis of Sugarcane Bagasse Over Cerium (rare earth) Loaded HZSM-5 Zeolite. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2017). Catalytic Pyrolysis of Sugarcane Bagasse using Molybdenum Modified HZSM-5 Zeolite. The 9 th. International Conference on Applied Energy (ICAE2017). Cardiff, UK. August Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 36

37 CURICULLUM VITAE November Balasundram, V., Ibrahim, N., Samsudin, M. D. H., Kasmani, R. M., Hamid, M. K. A., Isha, R., and Hasbullah, H. (2016). Thermogravimetric Studies on the Catalytic Pyrolysis of Rice Husk. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Rosely, N. A. M., Rashid, N. A., Mohd Noor, M. A., Hawi, N. D. A., Sepuan, S. Q., Shamsuddin, A., Ibrahim, K. A., and Hamid, M. K. A. (2016). Product Sampling Time and Process Residence Time Prediction of Palm Oil Refining Process. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2016). Optimal Retrofit of Natural Gas Liquid Separation Direct Sequence and Feed Condition Sensitivity Analysis. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2016). Catalytic Pyrolysis of Coconut Copra and Rice Husk for Possible Maximum Production of Bio- Oil. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Sadikin, A. N., Yusof, K. M., Aziz, A. A., Hassim, M. H., Zakaria, Z. Y., Mustaffa, A. A., and Hamid, M. K. A. (2016). A Multi-Year Study of Professional Skills Development Among First Year Chemical Engineering Students. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) inconjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Balasundram, V., Ibrahim, N., Kasmani, R. M., Hamid, M. K. A., Isha, R., Hasbullah, H., Ali, R. R. (2016). The Effect of Catalyst Loading (Ni-Ce/Al2O3) on Coconut Copra Pyrolysis via Thermogravimetric Analyzer. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2016). Hydrocarbon Mixture Fractionation Direct Sequence Retrofiitting and Feed Condition Sensitivity Analysis. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). A Simple Case Study on Application in Synthesising a Feasible Heat Exchanger Network. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). Sensitivity Analysis of Industrial Heat Exchanger Network Design. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2016). An Industrial Case Study Application in Synthesising a Feasible Heat Exchanger Network. The 9 th Regional Conference on Chemical Engineering (RCChE 2016) in-conjuction with Postgraduate International Symposium on Chemical & Energy Engineering (POISChE 2016). Kuala Lumpur, Malaysia. November Balasundram, V., Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Investigation on Thermochemical Behaviour of Malaysia Biomasses via Thermogravimetric Analysis (TGA). Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Design of Bench-Scale Fast Pyrolysis Reactor for Bio-Fuel Production. Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 37

38 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 78. Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Improvement for NGLs Direct-Indirect Sequence Fractionation Unit Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainability Improvement for Natural Gas Liquids of Direct Sequence Separation Process Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December Balasundram, V., Ibrahim, N., and Hamid, M. K. A. (2015). Investigation on the Thermochemical Behaviour of Malaysia Biomasses via Thermogravimetric Analysis (TGA). 2 nd. Workshop on Probiorefine. Johor Bahru, December, Alias, N., Ibrahim, N., Hamid, M. K. A., and Hasbullah, H. (2015). Design of Bench-Scale Fast Pyrolysis Reactor for Bio-Fuel Production. 2 nd. Workshop on Probiorefine. Johor Bahru, December, Ibrahim, N., Kasmani, R. M., Hasbullah, H., Hamid, M. K. A., Ali, R. R., and Sadikin, A. N. (2015). Production of Biogas via Anaerobic Digestion from Coconut Copra Waste and Cow Manure. Global Engineering & Applied Science Conference. Tokyo, December, Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Design of Sustainable Energy Efficient Distillation Columns (Sustain-EEDCs) Sequence. International Conference on Fluids and Chemical Engineering (FluidsChE2015). Langkawi, Malaysia. November Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement for Natural Gas Liquids Indirect Sequence Fractionation. 28 th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Methodology Development for Sustainable Energy Efficient Distillation Columns (Sustain-EEDCs) Sequence Design. 28 th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Balasundram, V., Hasbullah, H., Hamid, M. K. A., Kasmani, R. M., and Ali, R. R. (2015). Comparison Study of Combustion Characteristic of Biomass- Derived Pyrolysis Oil and Heavy Fuel Oil. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficiency Improvement for NGLs Indirect Sequence Fractionation Unit. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Integrated Process Design and Control Methodology for Heat Exchanger Network. International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Hydrocarbon Mixtures Separation Unit. 18 th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES 15), Kuching, Sarawak, Malaysia, August, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Initial Analysis on Heat Exchanger Networks of Fatty Acid Fractionation Plant to Optimize Energy Recovery and Controllability. 18 th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES 15), Kuching, Sarawak, Malaysia, August, Nordin, M. Z., Othman, M. R., and Hamid, M. K. A. (2015). Application of Sustainable Integrated Process Design and Control for Four Columns Systems. 18 th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES 15), Kuching, Sarawak, Malaysia, August, Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement in the Natural Gas Liquids Fractionation Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 38

39 CURICULLUM VITAE November 2017 Unit. 18 th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES 15), Kuching, Sarawak, Malaysia, August, Mohd. Yusof, K., Abdullah, F. A. P., Sadikin, A. N., Abdul Aziz, A., Mustaffa, A. A., Zakaria, Z. Y., Hamid, M. K. A., and Hassim, M. H. (2015). Integrated Course Design for Supporting Contextual Learning for First Year Engineering Students. Innovative Practices in Higher Education 2015 (I-PHEX 2015), Kuala Lumpur, August, Rahimi, A. N., Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Yusoff, N., Al-Mutairi, E. M., and Hamid, M. K. A. (2015). Energy Efficiency Improvement for Natural Gas Liquids Direct-Splitter- Direct Sequence Fractionation Unit. The 1 st. ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., and Hamid, M. K. A. (2015). Sustainable Energy Efficient Distillation Columns Sequence Design of Aromatic Separation Unit. The 1 st. ICRIL- International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April Alias, N., Ibrahim, N., Hamid, M. K. A., Hasbullah, H., Ali, R. R., and Kasmani, R. M. (2015). Investigation of Oil Palm Wastes Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. The 7 th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2015). Effect of Delta Temperature Minimum Contribution in Obtaining an Operable and Flexible Heat Exchanger Network. The 7 th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March Zaine, M. Z., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A., Hamid, M. K. A. (2015). Minimum Energy Distillation Columns Sequence for Aromatics Separation Process. The 7 th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March Mustafa, M. F., Zaine, M. Z., Ibrahim, N., Ibrahim, K. A., Hamid, M. K. A. (2015). Optimal Synthesis of Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixture Separation Process. The 7 th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March Zaine, M. Z., Mustafa, M. F., Ibrahim, K. A., Ibrahim, N., Hamid, M. K. A. (2015). Energy Efficient Distillation Columns Analysis for Aromatic Separation Process. The 3 rd. International Science Postgraduate Conference 2015 (ISPC2015), Johor Bahru. February Azizan, M. F., Mustafa, M. F., Ibrahim, N., Ibrahim, K. A. I., and Hamid, M. K. A. (2015). Energy Efficient Distillation Columns Sequence for Hydrocarbon Mixtures Fractionation Process. The 3 rd. International Science Postgraduate Conference 2015 (ISPC2015), Johor Bahru. February Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal Synthesis of Energy Efficient Distillation Columns Sequence of Natural Gas Liquids. The 7 th. Regional Conference on Chemical Engineering (RCChE 2014), Jogyakarta. December Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Optimal Synthesis of Energy Efficient Distillation Columns Sequence Using Driving Force Method. The 2 nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November Mustafa, M. F., Gotowo, A., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Minimum Energy Distillation Column Sequence for NGLs Fractionation Process. The 2 nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., and Hamid, M. K. A. (2014). Design of Energy Efficient Distillation Columns for Separation of Oxygenates Process. 27 th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21 st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October Zakaria, S. A., Zakaria, M. J., M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for Assessing Sustainability Index of Reactor Systems. 27 th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21 st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 39

40 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 49. Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Integrated Tool for Assessing Sustainability Index of Distillation Column Systems. 27 th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21 st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October Zakaria, S. A., Zakaria, M. J., Othman, M. R., and Hamid, M. K. A. (2014). 3D Sustainability Analysis of Integrated Process Design and Control for Production of Cyclohexanone. The 2 nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, N., Ibrahim, K. A., and Hamid, M. K. A. (2014). Energy Efficient Distillation Columns Design for Rettrofit NGLs Fractionation Process. The 2 nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Thermogravimetric Analysis of Rice Husk and Coconut Pulp for Potential Biofuel Production by Flash Pyrolysis. The 2 nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August Nordin, M. Z., Jais, M. Z., Othman, M. R., and Hamid, M. K. A. (2014). Three-Dimensional Sustainability Analysis for Integrated Process Design and Control for Separation of Benzene and Toluene Mixture. The 2 nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Controllability Analysis on Delta Temperature Minimum to Obtain Operable and Flexible Heat Exchanger Networks. The 5 th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability Tool for Separation of Benzene and Toluene Mixture. The 5 th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). The Application of Integrated Sustainability Tool for Production of Cyclohexanone. The 5 th International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), Johor Bahru. August Mustafa, M. F., Abdul Samad, N. A. F., Ibrahim, K. A., Ibrahim, N. and Hamid, M. K. A. (2014). Design of Energy Efficient Distillation Columns Systems. International Symposium on Green Manufacturing and Applications (ISGMA 2014), Busan, Korea June, pp Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Flexible and Operable Energy Integrated Distillation Column Systems. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June Zakaria, S. A., Zakaria, M. J., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Continuous-Stirred Tank Reactor System. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June Nordin, M. Z., Jais, M. Z., and Hamid, M. K. A. (2014). Sustainable Integrated Process Design and Control for a Distillation Column System. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June Mustafa, M. F., Abdul Samad, N. A. F., and Hamid, M. K. A. (2014). Methodology Development for Designing Energy Efficient Distillation Column Systems. The 6 th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 June Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2014). Design Target Selection for Heat Exchanger Network Synthesis Based on Trade-Off Plot. The 6 th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 June Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). An Investigation of Oil Palm Wastes Pyrolysis by Thermogravimetric Analyzer for Potential Biofuel Production. The 6 th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 June 2. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 40

41 CURICULLUM VITAE November Alias, N., Ibrahim, N, and Hamid, M. K. A. (2014). Pyrolysis of Oil Palm Empty Fruit Bunch by Thermogravimetric Analysis. The 6 th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 June Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part II: Parametric study. The 6 th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 June Esfeh, H. K., and Hamid, M. K. A. (2014). Temperature effect on proton exchange membrane fuel cell performance part I: Modelling and validation. The 6 th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 June Akbari, V., and Hamid, M. K. A. (2013). Prediction of Minimum Fluidization Velocity Using a CFD-PBM Coupled Model in an Industrial Gas Phase Polymerization Reactor. National Colloquium on Process Control (NCPC 2013), Universiti Sains Malaysia, Pulau Pinang. 1 Oct. 30. Borhani, T. N. G., Akbari, V., Hamid, M. K. A., Manan, Z. A. (2013). Rate-Based Simulation of DEA Promoted Potassium Carbonate Process. 6 th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia June, Akbari, V., Borhani, T. N. G., Esfeh, H. K., and Hamid, M. K. A. (2013). Computational Fluid Dynamic and Population Balance Modeling of Industrial Fluidized Bed Polymerization Reactor. 6 th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia June, Lawal, S., Halimoon, H., Zainal Alam, M. N. H., and Hamid, M. K. A. (2013). Optimization of Microbioreactor Operating Volume by Using Attainable Region Approach. 6 th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia June, Mohd-Yusof, K., Hamid, M. K. A., Hassim, M. H., Harun, S., and Syed Hassan, S. A. H. (2013). Problem Based Learning for Process Control and Dynamics, Part 1: Effective Planning for a Typical Course. 6 th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia June, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Integrated Process Design and Control of Heat Exchanger Networks for Biomethanol Production Plant. 6 th International Conference on Process Systems Engineering (PSE Asia 2013), Kuala Lumpur, Malaysia June, Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2013). Flexible and Operable Heat Exchanger Networks, 11 th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June Ibrahim, N., Jensen, P. A., Dam-Johansen, K., Hamid, M. K. A., Kasmani, R. M., Ali, R. R., and Hasbullah, H. (2013). Experimental Investigation of Flash Pyrolysis Oil Droplet Combustion. 11 th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June Hamid, M. K. A. (2012). Development of a Sustainable Integrated Process Design and Control for Chemical Processes. In: Bono, A., and Sipaut, C. S. (Eds.). The 26 th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4 th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia Abu Bakar, S. H., Hamid, M. K. A., Wan Alwi, S. R., and Manan, Z. A. (2012). Development of a New Model-Based Integrated Process Design and Control for Heat Exchanger Networks. In: Bono, A., and Sipaut, C. S. (Eds.). The 26 th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4 th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. 3 rd. Dansk KemiingeniorKonference, Kgs. Lyngby, Denmark June. 20. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. CAPE Forum 2010, Aachen, Germany March. 19. Hamid, M. K. A., Sin, G., and Gani, R. (2010). Application of Decomposition Methodology to Solve Integrated Process Design and Controller Design Problems for Reactor-Separator-Recycle Systems. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 41

42 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] DYCOPS 2010 (9 th. International Symposium on Dynamics and Control of Process Systems), Lueven, Belgium. July 5-7, Alvarado-Morales, M., Hamid, M. K. A., Sin, G., Gernaey, K. V., Woodley, J. M., and Gani, R. (2009). A Model-Based Methodology for Simultaneous Design and Control of a Bioethanol Production Process. 10 th. International Symposium on Process Systems Engineering, Salvador de Bahia, Brazil August. 17. Hamid, M. K. A., Sin, G., and Gani, R. (2009). A New Model-Based Methodology for Simultaneous Design and Control of Reaction-Separation Systems with Recycle. 19 th. European Symposium on Computer Aided Process Engineering (ESCAPE19), Krakow, Poland June. 16. Hamid, M. K. A., Sin, G., and Gani, R. (2009). Determination of Optimal Design and Control Decisions for Reactor-Separator Systems with Recycle. FOCAPD 2009 (7 th. International Conference on the Foundations of Computer-Aided Process Design), Breckenridge, CO June. 15. Hamid, M. K. A., and Gani, R. (2008). A Model-Based Methodology for Simultaneous Process Design and Control for Chemical Processes. FOCAPO 2008 (Foundations of Computer-Aided Process Operations), Cambridge, Massachusetts. June 29 July Ahmad, A., Abdul Samad, N. A. F., and Hamid, M. K. A. (2007). Product Optimization of a Fed-Batch Fermentation Processes. European Congress of Chemical Engineering (ECCE-6), Copenhagen, Denmark. Sept. 2007, Hamid, M. K. A., Ibrahim, N., Ibrahim, K. A. and Ahmad, A. (2006). Simulation of hydrogen production for mobile fuel cell applications via autothermal reforming of methane. International Conference on Natural Resources Engineering and Technology (INRET 2006), Putrajaya, Malaysia July Mohd. Yusof, K., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S. A. H., and Tasir, Z. (2005). Outcomes of Problem-Based Learning Implementation from Students Perspective. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, December Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K. and Syed Hassan, S. A. H. (2005). Crafting Effective Engineering Problems for Problem-Based Learning: Universiti Teknologi Malaysia Experiences. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, December Mohd. Rohani, J., Abu Hassan, M. A., Syed Hassan, S. A. H., Hamid, M. K. A. and Mohd.Yusof, K. (2005). Assessing the Effectiveness of Problem Based Learning (PBL) using Quality Function Deployment (QFD): Students Perspective. Regional Conference on Engineering Education (RCEE 2005), Johor Bahru, December Syed Hassan, S. A. H., Mohd. Yusof, K., Hamid, M. K. A. and Hassim, M. H. (2005). Problem-based Learning in Facilities Planning: A Pilot Implementation, 4 th Asia-Pacific Forum on Engineering and Technology Education, Bangkok, Thailand, September Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., and Mohd. Yusof, K. (2004). Implementation of Problem-Based Learning in a Typical Engineering Classroom. Conference on Engineering Education, Kuala Lumpur, Dec Abu Hassan, M. A., Mohd. Yusof, K., Hamid, M. K. A., Hassim, M. H., Abd. Aziz, A., and Syed Hassan, S. A. H. (2004). A Review and Survey of Problem-Based Learning Application in Engineering Education. Conference on Engineering Education, Kuala Lumpur, Dec Mohd. Yusof, K., Abd. Aziz, A., Hamid, M. K. A., Abu Hassan, M. A., Hassim, M. H., Syed Hassan, S. A. H., and Azila, N. M. A. (2004). Problem-Based Learning in Engineering Education: A Viable Alternative for Shaping Graduates for the 21 st Century?. Conference on Engineering Education, Kuala Lumpur, Dec Hassim, M. H., Hamid, M. K. A., Abu Hassan, M. A., Mohd. Yusof, K., Syed Hassan, S. A. H., and Esa, M. (2004). Enhancing Learning Through Cooperative Learning: UTM Experience. Conference on Engineering Education, Kuala Lumpur, Dec Ahmad, A. and Hamid, M. K. A. (2003). Pipeline Leak Detection System in a Palm Oil Fractionation Plant Using Artificial Neural Network. International Conference on Chemical and Bioprocess Engineering (ICCBPE), Sabah, Malaysia. August Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 42

43 CURICULLUM VITAE November Ahmad, A. and Hamid, M. K. A. (2002). Detection of Multiple Sensor Faults in a Palm Oil Fractionation Plant Using Artificial Neural Network. Regional Symposium on Chemical Engineering (RSCE 2002) in conjunction with 16th Symposium of Malaysian Chemical Engineers (SOMChE 2002), Petaling Jaya, Malaysia. 2. Ahmad, A. and Hamid, M. K. A. (2002). Detection of Sensor Failure In a Palm Oil Fractionation Plant Using Artificial Neural Network. International Conference On Artificial Intelligence In Engineering and Technology ICAIET, Sabah, Malaysia. 1. Ahmad, A. and Hamid, M. K. A. (2001). Neural Networks for Process Monitoring and Fault Detection: Application to Tennessee Eastman Plant. Malaysian Science & Technology Congress, Melaka, Malaysia. Other Publications 1. Hamid, M. K. A. (2013). Aspen HYSYS: An Introduction to Chemical Engineering Simulation. LAP Lambert Academic Publishing. ISBN: International MOU MEMORANDUM OF UNDERSTANDING (MOU) SIGNED 1. Title: MOU between Focus Consultancy Services, K.S.C.C. (Kuwait) and Universiti Teknologi Malaysia Date: 1 st July 2013 Level: International Role: Member National MOU 3. Title: MOU between Lahad Datu Edible Oils Sdn Bhd and Universiti Teknologi Malaysia Date: 10 th Dec Level: National Role: Leader 2. Title: MOU between Pasir Gudang Edible Oils Sdn Bhd and Universiti Teknologi Malaysia Date: 27 th Aug Level: National Role: Member 1. Title: MOU between Malaysian Green Technology Corporation and Universiti Teknologi Malaysia Date: 28 th March Level: National : Member ENDOWMENT/GIFT Gifts 1. From: Lahad Datu Edible Oils Sdn Bhd Date: 27 th Oct Amount: RM 102,000 Objective: Samples analysis for Refined Bleached Deodorised Palm Oil (RBDPO) product quality prediction using statistical methods. Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 43

44 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] PROFESSIONAL SHORT COURSE CONDUCTED 22. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Awana Kijal Golf & Beach Resort, Terengganu Date: 11, 12, 18 & 19 Mar 2016 Participants: Engineers from Petronas. 21. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Seminar Room, IBD, UTM KL. Date: 21, 22, 28 and 29 Nov Participants: Engineers from Industry. 20. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 2 5 Nov Participants: Shell Malaysia Technicians. 19. Title: Process Dynamics and Control for Technicians. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Dahlia Seminar Room, IBD, UTM. Date: Oct Participants: Shell Malaysia Technicians. 18. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: May Participants: Shell Malaysia Technicians. 17. Title: Process Dynamics and Control for Technicians. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Dahlia Seminar Room, IBD, UTM. Date: Mar Participants: Shell Malaysia Technicians. 16. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: Dec Participants: Shell Malaysia Technicians. 15. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Awana Kijal Golf & Beach Resort, Terengganu Date: 31 Oct., 1, 7 & 8 Nov Participants: Engineers from Petronas. 14. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Awana Kijal Golf & Beach Resort, Terengganu Date: 9 10 & Aug Participants: Engineers from Petronas. 13. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: Aug Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 44

45 CURICULLUM VITAE November 2017 Participants: Shell Malaysia Technicians. 12. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: 5 8 May Participants: Shell Malaysia Technicians. 11. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Jasmin Seminar Room, IBD, UTM. Date: Sept Participants: Shell Malaysia Technicians and AdeChem Engineers. 10. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Awana Kijal Golf & Beach Resort, Terengganu Date: 10, 11, 17, 18 May Participants: Engineers from Petronas. 9. Title: Introduction to Chemical Engineering Process Simulator using Aspen HYSYS. Organizer: Process Systems Engineering Centre (PROSPECT), UTM. Venue: Seminar Room, PROSPECT, UTM. Date: Apr Participants: UTM Postgraduate Students. 8. Title: Process Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Seminar Room, IBD, UTM KL. Date: 16, 17, 23, 24 Feb Participants: Engineers from Industry. 7. Title: Distillation Operation, Control and Troubleshooting. Organizer: Institute of Bioproduct Development (IBD), UTM. Venue: Kenanga Seminar Room, IBD, UTM. Date: Oct Participants: Shell Malaysia Technicians. 6. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: 31 Mar. 1 Apr Participants: UTM students. 5. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: Mar Participants: UTM students. 4. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: 3 4 Feb Participants: UTM students. 3. Title: A Two-Day Course on Process Modelling using HYSYS for UTM Degree++. Organizer: School of Professional and Continuing Education (SPACE), UTM. Venue: Process Control Lab 2, N29, FKKKSA, UTM. Date: Mar Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 45

46 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] Participants: UTM students. 2. Title: A One-Day Course on MATLAB and SIMULINK : Basics Programming Techniques. Organizer: Institute of Engineers Malaysia (IEM) UTM Student Chapter. Venue: Process Design Lab, FKKKSA, UTM. Date: 19 Feb Participants: UTM students. 1. Title: A Three-Day Course on Advanced Process Control. Organizer: Chemical Engineering Pilot Plant (CEPP), UTM. Venue: Jasmine Seminar Room, CEPP UTM. Date: May Participants: Industrial Participants from Malaysia. Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 46

47 CURICULLUM VITAE November 2017 PROFESSIONAL COURSE/SEMINAR/TRAINING/FORUM/CONFERENCE ATTENDED RELATED TO RESEARCH AND DEVELOPMENT Conference on Emerging Energy and Technology (CONCEPT2015). Melaka, Malaysia. December nd. Workshop on Probiorefine. Johor Bahru, December, International Conference on Fluids and Chemical Engineering (FluidsChE2015). Langkawi, Malaysia. November th. Symposium of Malaysian Chemical Engineers 2015 (SOMChE2015), Putrajaya, Malaysia. October International Conference on Low Carbon Asia (ICLCA2015), Johor, Malaysia. October th. Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES 15), Kuching, Sarawak, Malaysia, August, Innovative Practices in Higher Education 2015 (I-PHEX 2015), Kuala Lumpur, August, The 1 st. ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur, April The 7 th International Conference on Applied Energy (ICAE2015), Abu Dhabi, March The 7 th. Regional Conference on Chemical Engineering (RCChE 2014), Jogyakarta. December The 2 nd. International Seminar on Fundamental and Application of Chemical Engineering (ISFAChE 2014), Bali. November th Symposium of Malaysian Chemical Engineers (SOMChE 2014) in conjunction with 21 st Regional Symposium on Chemical Engineering (RSCE 2014), Subang Jaya. October The 2 nd International Conference on Global Sustainability and Chemical Engineering (ICGSCE2014), Kuala Lumpur. August International Symposium on Green Manufacturing and Applications (ISGMA 2014), Busan, Korea June. 30. The 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), Kuala Lumpur. June The 6 th. International Conference on Applied Energy (ICAE2014), Taipei, Taiwan. May 30 June th. International Conference on Process Systems Engineering (PSE Asia 2013). Kuala Lumpur June th International Conference on Chemical and Process Engineering (ICheaP-11), Milan, Italy. June 2 5, th Symposium of Malaysian Chemical Engineers (SOMChE 2012) with the 4 th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Sabah, Malaysia. 25. DYCOPS 2010 (9 th. International Symposium on Dynamics and Control of Process Systems), Lueven, Belgium. July CAPE Forum 2010, Aachen, Germany. March PhD Summer 2009 School on Uncertainty and Sensitivity Analysis on Numerical Models (28923). CAPEC, Technical University of Denmark (DTU). 3 7 Aug PhD Summer 2009 School on Advanced Process Optimization (28905). CAPEC, Technical University of Denmark (DTU). 29 Jun 3 Jul ESCAPE 19 (European Symposium on Computer Aided Process Engineering). Cracow, Poland Jun CAPEC Annual Meeting Comwell Borupgaard, Helsingor, Denmark. 2 4 Jun PhD Summer 2008 School on Advanced Computer Aided Modelling (28901). CAPEC, Technical University of Denmark (DTU). 21 Jul. 1 Aug Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 47

48 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 18. FOCAPO 2008 (Foundations of Computer-Aided Process Operations). Cambridge, Massachusetts, USA. 29 Jun 2 Jul CAPEC Annual Meeting Frederiksdal Hotel, Lyngby, Denmark Jun Europen Congress of Chemical Engineering (ECCE-6), Copenhagen, Denmark Sept PhD Summer School 2007 on Process and Tools Integration (28902). CAPEC, Technical University of Denmark. 20 Aug. 14 Sept st. International Conference on Natural Resources Engineering and Technology Putrajaya, Malaysia July HYSYS Dynamic Training. Process Control Lab 2, N29, FKKKSA. 28 Dec Steady State Simulation Using HYSYS Course. Process Control Lab 2, N29, FKKKSA. 27 Dec Days Neural Network Fundamentals and Implementation in MATLAB Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 1-2 Dec Day IMAGE PROCESSING with MATLAB & SIMULINK Hands-on Training Course. Process Control Lab 2, N29, FKKKSA. 30 Nov Days MATLAB for Control System Design Hands-on Training Course. Process Control Lab 2, N29, FKKKSA Nov Days Exploring Fundamental DSP with MATLAB & SIMULINK Hands-on Training Course. Process Control Lab 2, N29, FKKKSA Nov Days MATLAB for Fuzzy Logic Hands-on Training Course. Process Control Lab 2, N29, FKKKSA Nov Day FEMLAB Training Package Course. Process Control Lab 2, N29, FKKKSA. 18 Nov Days MATLAB & SIMULINK Fundamental Hands-on Training Course. Process Control Lab 2, N29, FKKKSA Nov International Conference on Chemical and Bioprocess Engineering (ICCBPE). Kota Kinabalu, Sabah Regional Symposium on Chemical Engineering (RSCE) in conjunction with 16 th Symposium of Malaysian Chemical Engineers (SOMChE). Petaling Jaya, Selangor International Conference on Artificial Intelligence in Engineering & Technology (ICAIET). Kota Kinabalu, Sabah Malaysian Science & Technology Congress. Riviera Hotel, Melaka Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 48

49 CURICULLUM VITAE November 2017 PROFESSIONAL COURSE/SEMINAR/TRAINING/FORUM/CONFERENCE ATTENDED RELATED TO TEACHING AND LEARNING 27. Bengkel Pemantapan Programme Review Report (PRR) dan Course Review Report (CRR) Jabatan Kejuruteraan Kimia. Mahkota Hotel, Melaka Sept Workshop on Future Direction in Engineering Education. Puteri Pacific Hotel, Johor Bahru. 17 Dec One Day Workshop on Writing Course for Outcome-Based Education (OBE). Smart Class Room, N29 FKKKSA. 24 Apr Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module F2: Teaching Portfolio Development. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 21 Dec Course on Higher Learning Teaching Certificate (SPPT) Level 2 Module E2: Adult Learning. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 20 Dec Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module F1: Teaching & Learning Improvement Through Reflection Practice. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 19 Dec E-Learning Forum. CTL Hall, UTM. 30 Nov Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module E3: Quality Assurance Practice. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 9 Nov Course on Higher Learning Teaching Certificate (SPPT) Level 1 Module E1: Curriculum Design & Development. Dewan Jamuan Korporat, Pusat Pengajaran & Pembelajaran (CTL), UTM. 7 8 Nov One Day Course on Outcome-Based Education (OBE). Pulai Springs Resort June Problem-Based Learning: Sudents Experience Forum. CTL Hall, UTM. 6 Apr Teaching Evaluation Workshop for Semester II 2005/2006. Dewan Jamuan UTM. 28 Mar Active Learning Colloquium. CTL Hall UTM. 28 Feb Regional Conference on Engineering Education (RCEE 2005). Eden Garden Hotel, Johor Bahru Dec Half-Day Seminar on Designing Courses for Outcome-Based Education (OBE). Dewan Senat UTM. 9 Dec Bengkel E-Learning untuk Problem Based Learning (PBL). Makmal Komputer 1 & 2, Pusat Pengajaran dan Pembelajaran. 7-8 July Bengkel Developing Teaching in English Skill.Smart Class Room, N April Bengkel Pendedahan dan Latihan Lanjutan Problem-Based Learning (PBL) bagi Staf Sumber PBL dan CL-PBL Support Group Fakulti. Rumah Alumni, UTM. 5-7 April Basics Counseling Skills Academic Mentors. Bilik Jasmin, CEPP. 22 Feb Kursus Pembelajaran Berasaskan Teknologi (e-learning). Makmal Komputer 2, Pusat Pengajaran dan Pembelajaran Jan A One Day Workshop on Active Learning and Cooperative Learning. Smart Class Room, N29, FKKKSA. 10 Jan Conference on Engineering Education (CEE 2004). Renaissance Hotel, Kuala Lumpur Dec Kursus Kaedah Pengajaran & Pembelajaran: Pembelajaran Dewasa (Adult Learning). Dewan Kuliah 2, Pejabat Pengajaran & Pembelajaran, Bangunan SPS, Blok F54, UTM. 7 Dec Perbincangan Mengenai Pelaksanaan Pembelajaran Kooperatif dan Pembelajaran Berasaskan Masalah di UTM. Dewan Senat, Aras 3, Bangunan Pentadbiran, UTM. 18 Oct A One Day Workshop on Learning Outcomes. Bilik Mesyuarat Fakulti, FKKKSA, UTM. 12 Aug Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 49

50 [DR. MOHD. KAMARUDDIN BIN ABD. HAMID] 2. Bengkel Pendedahan dan Latihan Lanjutan Problem Based Learning (PBL) di Kalangan Timbalan Dekan, Ketua Jabatan dan Staf Sumber PBL Fakulti di UTM. Rumah Alumni, UTM July A One Day Workshop on Learning Outcomes. Bilik Mesyuarat Fakulti, FKKKSA, UTM. 16 June Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia 50

51 CURICULLUM VITAE November 2017 PROFESSIONAL COURSE/SEMINAR/TRAINING/FORUM/CONFERENCE ATTENDED RELATED TO SELF DEVELOPMENT 19. Venture Plan Essential Boot Camp. Pangkor Island Beach Resort, Perak Oct DOI & Business Terms Workshop. Renaissance Hotel, Johor Bahru. 2-4 Oct Program Pembangunan Kepimpinan Inovatif & Tranformasi Pensyarah Muda KIT 2012 (Zon Selatan). Cherengin Hills Convention & Spa Resort, Janda Baik, Pahang Jun PROSPECT Strategic Planning Grand Lexis, Port Dickson May Taklimat ke Arah Membina Kerjaya Cemerlang sebagai Pensyarah. Institute of Bioproduct Development, UTM. 16 May Revisit Global Branding Through Creativity and Innovation (GBCI) Workshop. Mahkota Hotel, Melaka Dec UTM Professional Qualification Development Programme (PQDP). Smart Class Room, N29 UTM. 16 Aug Academic Advising Course for Academic Advisor. Le Grandeur Palm Resort, Senai johor Jul Kursus Bina Negara untuk Ahli Akademik yang Melanjutkan Pelajaran di Luar Negara. Kem Bina Negara, Ulu Sepri, Negeri Sembilan. 27 Apr. 1 May Chemical Engineering Department Excellence Workshop. Tiara Beach Resort, Port Dickson Jun Chemical Engineering Department Excellence Workshop. Summerset Resort Rompin Nov Basic Counselling Skills for Academic Mentors. Jasmine Room, CEPP UTM. 22 Feb Motivation and Teamwork Workshop for Chemical Engineering Department. Desaru Golden Beach Resort Jul Kursus Induksi untuk Kumpulan Pengurusan dan Professional. Block P16, FKE UTM. 25 May 10 Jun UTM Research Methodology Course Block P16, FKE UTM May IELTS Preparation Course. Senate Hall, Level 3, Administration Building UTM Apr Kursus Bina Negara untuk Ahli Akademik yang Melanjutkan Pelajaran di Luar Negara. Kem Bina Negara, Ulu Sepri, Negeri Sembilan. 26 Feb. 1 Mar Kursus Orientasi untuk Staff Baru UTM. Dewan Al-Ghazali UTM. 29 Jan Marcomedia Flash MX Course. CICT Hall UTM Sept Process Systems Engineering Centre (PROSPECT) Research Institute of Sustainable Environment (RISE) 51