Our skilled members of staff are working hard to satisfy the demand of our clients and be punctual with our contractual obligations.

Transcription

1 INTRODUCTION Our factory was established 1996 after studyg the market and fdg out that the future of everyday life will be based mostly on plastic products. Significant vestment modern methods and maches is gog on, producg shorter delivery time, quicker responses to market and our clients demand, consistently high quality products. Our skilled members of staff are workg hard to satisfy the demand of our clients and be punctual with our contractual obligations. We have started our production firstly satisfyg the local market, but sce 2000 we have started exportg our products to other G.C.C countries (Kuwait, Oman etc). Our factory produces plastic products many directions HDPE system: Irrigation of all sizes, and PPR pipes and fittg for cold and hot water. Also, we are producg UPVC pipes from 16 to 630 both solvent welded type, as well as rubber socket type. Our range cludes pipes 6,10, & 16bar pressure, which are manufactured accordg to ternational standard, which meet the market requirement (D 8062and ISO 161/1). We have already supplied our above products to various government departments, through their respective purchasg departments, (Abu Dhabi Municipality, Mistry of Agriculture, Private Department ) We have as well supplied to contractors through the local market for their works buildg, after obtag the approval of the all abovementioned departments. On the other hand we have tested our products to follow the standard specifications, we found them good (Al Futaim lap. Dubai) and we have our lab for testg products before supply. In our products we are usg the poly vyl chloride and HDPE and P.P.R. as raw materials. The process of production startg from storg raw material then to mixg and compoundg and fally to production le to produce followg items : a) PVC Pipes and Pipe fittgs: Servicg the ma water and draage le systems. We have succeded establishg excellent relations with our major 1

2 b) PVC Conduit Pipes and accessories: Electrical supply and distribution system for electrical and telephone cable duct. c) High density polyethylene: Irrigation garden systems d) PPR Pipes and fittgs: Used for water supply le system (hot and cold) Services: Our services are to support our client by givg them the right selection of all our products where we can end up with a solution to send each and every drop of water to its destation. All factories that followg the best quality and services, havg a good marg the market and tryg to be the best plastic manufactures the world. We have a very good share on the market sce we are tryg to mata our excellence. To ensure that all established procedures are implemented effectively and efficiently all areas of its application and tra concerned staff the areas of awareness ternal audits and periodically arrange refreshment courses. Plan these need to different months of the year execute the plan as per the competence and trag procedure. Update trag records, review the latest ternal audit reports and perform self assessment on a sample basis to establish the fact that weather the procedures are implemented effectively or need more attention. The development and review of our factory s policy update strategic plan is one of the most important thgs for our leadership needs to take to achieve its vision and mission. We have a permanent le for which imum and mimum stock we keep, which we assessed on experience. We always keep creasg our moulds to complete the series of every le for the market demand, our leaders have developed an annual budget coverg most busess function by let our les be able to be wider to achieve the coverage of all demand of the local market, with the process, the plan reviewed and updated at least every year. 2

3 customers and we try to satisfy their demands for additional varieties, once we make sure that the market will absorb the products to be produced from our additional vestment. If an outsider comes requestg any product out of our production le, we quote them alternative quantities, where we depreciate our additional vestment; contacts are itiated with customers order to determe their future needs. Because all of above we have a very good share the local and ternational markets sce we are tryg to mata our excellence. The parts which available accordg to followg the ISO management quality system and requirements. We apply suitable methods for monitorg and measurg the quality management system processes. These methods demonstrate the ability of the processes to achieve planned results when planned results one not achieved, correction and corrective action and procedure are taken. As appropriate to ensure conformity of the product, statistical techniques we used for this purpose. We ensure the purchased product conforms to specified purchase requirements, the type and extent at the contents applied to the suppliers and their evaluation always we search for new completion supplier and new sources to mimize the cost of material and operation. Cost of the operation and matenance of the machery and equipment and buildg and other expenses had been elimatg to good level by settg the corrective preventive matenance schedules and action survival and success require an ability to navigate the wilds of today s ever evolvg technology, conference and presentation of our products took place thought the year, at our holdg semars or their respective subsidiaries. Quality also measured accordg to the ternational standard this field Management Quality and Processg Quality. All the standards used followg characteristic: Thermal Properties Specific Heat Thermal Conductivity Lear Expansion Heat Distortion Temperature 3

4 Mechanical Properties Tensile Strength Compressive Strength Flexural Strength Elongation at Break Modulus of Elasticity Hardness (Rockwell) Electrical Properties Breakdown Voltage Volume Resistivity Power Factor Dielectric Constant Chemical Properties Resistance to Acetone The sample is taken randomly to be checked so that we know the quality of our products enablg us to know that our production process is gog smoothly accordg to the standards. We have our good transportation department where it supports us to get the good satisfaction from our customers by deliverg their goods the specifide period of time. Our strategy is to keep the mimum and the imum stock to face the emergency requirement, on the same time we keep the customer orders as schedule. A respective and supportive relationship where they do support us with delivery schedules of our orders. Our Strength is maly based on our quality, range of products, services and technical support and the quality management system of our factory monitors formation relatg to customer perception whether the organization has fulfilled the customer requirements, we have the capacity to facg the development of plastic products the same time we have good relation with the same field product factories and ternational technical engeerg organizations. Our weakness comes from the sudden supplies who try to put a place for them the market through the prices not through the quality. Our opportunity to deal with good customers who understand the meang of quality and support the dustrial organization. Our threat is that the level of the market goes down and looks maly to the prices, and the not legitimate competition. 4

5 To analyze feedback received durg the year with the appropriate statistical tools order to dent areas for improvement and customer satisfaction creasg to at least 4% of existg level. Implement customer satisfaction measure procedure, calculate the over all satisfaction customer requirements. Identify areas for implement for the next five years by identify resources requirements. Implement improvement action and monitor its effectiveness. Re calculates the over all satisfaction of customer requirement to fd out if the target achieved. Selectg 3 new suppliers (at least) of high quality methods and choosg at least two of them to add them to the improved supplier list. After we receive our revenue from the sales of product to the customers, we can build our ideas to understand fully the future need of potential customers for those products and fluence the customer needs. Our sales staff keep runng all the day searchg and makg surveys to connect it with our policy and strategy, to reach the high level of coverage. Our staffs havg a weekly meetg with the general manager to stand on what they achieved and to studyg their plan the next period. Tra our staff about what is new on the ternet formation to keep them counicate with changes of the ternational market and improve their skills, lookg for the future shape of our dustry for its necessary; our leaders understood how the factory is performg it is essential that system for measurg are place. The design taken by the leadership to enable control to be achieved, so the sales staff and the production manager meet daily to follow up: The result. Check the account and discuss future development. Normal process implement and audit with measure all aspects of busess performance and monitor these agast targets and external bench market, our leaders have the key roles this process. 5

6 LDPE Pressure Pipe Type DIN 8072 Outside Diameter 2.5 Bar Wall Thickness 6 Bar 10 Bar Specila Length Coils Can Supplied Agast Order The Recoended Workg Pressure is Based on a Temperature of 20 o C. Colour Black Stabilised Agast Heat and UV Radiation 6

7 Low Density Polyethylene Pipe Properties: Yield tensile strength: 11 N/2. Ultimate tensile strength: 20 N/2. Ultimate elongation: 800%. Vicat softeng pot: 91 c. LDPE Pipes are made from 100% virg polyethylene. It comes black color with mimum 2.5% of carbon black for UV resistance and suitable for drkg water and potable water supplier. LDPE Pipes are le with DIN 8072 standard. Drip Irrigation pipe Specification : Driple 19 O/D ( 16 I/D ), Driple 16 O/D ( 13 I/D ). bp drip irrigation pipe is made from the fest raw materials available low density polyethylene (LDPE) conformg to BS specifications and with a melt dex of 0.3 gm/10 m, specific gravity of 0.93% gm/ml at 20 o C. The carbon black content of 2.5% and anti oxidant of 0.3% approximately are both uniformly dispersed this unique formula offers stability to the drip pipe agast ultra violet and heat radiations. pb drip pipe is manufactured under strgent quality control, to ternational standards and specifications. It exibits a rare compation of outstandg thernal stress track resistance and burst strength. pb drip pipe has been hydrostatically tested and recoended for a contuous pressure ratg of 4 kg/cm 2 under the most severe climatic conditions. 7

8 LDPE Pressure pipe type 32 BS 1972 : 1967, 1970, 1973 Nomal Size m Outside Diameter m Class B Class C Class D m m Standard coil Strength 1/ m 3/ m m 1 1/ m 1 1/ m m m m Class B = 6.1 Kgf/cm (0.60 Nm/m : 200 ft hd : 86.7 lbf/ ) Class C = 9.1 Kgf/cm (0.89 Nm/m : 300 ft hd : 130 lbf/ ) Class D = 12.2 Kgf/cm (1.20 Nm/m : 400 ft hd : 173 lbf/ ) LDPE Pressure pipe type 32 BS 1972 : 1967, 1970, 1973 Outside Diametre Wall thickness 2.5 bar 6 bar 10 bar Special length coils can supplied agast order. The recoended workg pressure is pased on a temprature of 20 o C. Colour Black stabilised agast heat and UV radiation. 8

9 Normal Gauge LDPE pipe type 425 BS 1972 : 1961 for cold water services Nomal Outside Wall Workg Bore Diameter Thickness Pressure m m m 1/ / / / Heavy Gauge Nomal Outside Wall Workg Bore Diameter Thickness Pressure m m m 1/ / / / / / Note : Workg pressure means the pressure wich may be contuously applied to the pipe at tempratures not exeedg 68 F. ( 20 O C ). 9

10 Agricaltural & Irrigation Accessories Micro Dripper 46 Ltr/hr. Adjustable Flow Irrigation Dripper 0100 Ltr. Under the cap drippg 10

11 11

12 BRONZE AWARD 12

13 13

14 14

15 NOTE : 15

16 NOTE : 16