Covers & Frames. DPI Trading. Ductile Iron. Manhole Covers. Frames. Specification SANS : Value, Performance & Quality PROUDLY SUPPLIED BY
|
|
|
- Jessie Willis
- 6 years ago
- Views:
Transcription
1 Covers & Frames Ductile Iron Manhole Covers & Frames Specification SANS : 1994 Value, Performance & Quality DPI Trading PROUDLY SUPPLIED BY
2 Mechanical Properties A) THE DIFFERENCE BETWEEN DUCTILE AND GREY CAST IRON CAST IRON Ø Ductile Iron has a higher breakage safety coefficient, since it follows any deformation due to loads without breaking (unlike cast iron), the returning to the original condition after stress. Ø Cast Iron is made up of thousands of plates which interrupt the continuity of the metal matrix and consequently jeopardise its mechanical resistance and make it subject to possible cracking or braking. Ø Ductile Iron is made up of spheroids achieved by introducing a suitable quantity of magnesium into the bath before the casting. This gives the product a high breading load as well as remarkable elasticity B) THE BENEFITS OF Ø Ø Elasticity 270 Mpa Tensile Strength 420 Mpa Ø High Elongation > 10% Ductile Iron The Ductile Iron high strength to weight ratio allows for the production of light weight castings that offer what can amount to a 50% weight saving over traditional cast iron to achieve improved strength Description Materials covered Loading Class SANS 558 (Grey Iron) Cast Iron surface boxes and manhole inspection covers and frames Grey Cast Iron only HD = Heavy duty 135 Kn MD = Medium duty 40 Kn LD = Light duty 7 Kn SABS MARKS SABS 558 & SABS EN 124 comparison SANS (Ductile Iron) Gully tops and manhole tops for vehicular and pedestrian areas- Designed requirements, type testing, marking, quality control Spheriodal Graphic cast iron (Ductile Iron), Flake Graphite cast iron (Grey Iron): Cast Steel or any other material that meet the relevant requirements A 15 = 15Kn B125 = 125Kn C250 = 250Kn D400 = 400Kn E600 = 600Kn F900 = 900Kn Loading Class Table ( SANS 50124) Pedestrian Cyclist Sidewalks Walk Ways Car Parks Roadways Parking 1
3 747,2mm TYPE 2A SNAP LOCK COVER & FRAME CLASS D Kn 2A D Kn Type 2A Ductile Iron Snap Lock Cover & Frame M60 D400 SABS EN124 ø649mm 100mm ø610mm ø612mm0 A-A 2
4 TYPE 2A & 2B ROTATING WEDGE LOCK COVER & FRAME CLASS D Kn 2A D Kn Type 2A Ductile Iron Rotating Wegde Lock Cover & Frame 2B D Kn Type 2B Ductile Iron Rotating Wegde Lock Cover & Frame LOCK OPEN SG EN124-SABS-D400 2A EN124-SABS-D400 GJ PATENT 2002/8321 LOCK OPEN SG EN124-SABS-D400 2A EN124-SABS-D400 GJ PATENT 2002/8321 Stopper for Lift Location 624mm dia Cover 550mm dia Daylight opening 115mm 646mm dia Section showing Cover in Frame 4 Lugs on cover underside rotate anti-clockwise to engage with wedge and lock. To lift Cover out of frame, Cover is rotated clockwise to stopper at cut out. Lug then lifts out through cut out. Section showing Locking Wedge 3 The Cover and Frame become an integral unit when locked. Ensures no rocking or dislodging, as well as water tight.
5 TYPE 3A COVER & FRAME & TYPE 3B COVER & FRAME CLASS B Kn 3A B Kn Type 3A Ductile Iron Cover & Frame 3B B Kn Type 3B Ductile Iron Cover & Frame 121mm Covers 230mm Type 3B 305mm Type 3A Staple Staple Chain Conical Frame c 230mm 310mm TYPE 5 COVER & FRAME CLASS B Kn B Kn Type 5 Ductile Iron Cover & Frame Frame Cover EN124-B x 325mm + 1/-0 Cover Frame Chain fixed to Cover and Frame 152mm 380 x 305mm daylight opening 533 x 458mm 4
6 25Kg DOMESTIC COVER & FRAME CLASS A15-15Kn 25Kg A15 15Kn 25kg Domestic Ductile Iron Cover & Frame En124 A15 SABS M60.45 G J DOMESTIC SG IRON 600 X 450mm a COVER 647mm 30mm e d 2/ Chains C-Daylight Opening FRAME Type 9A COVER & FRAME CLASS B Kn 9A B Kn Type 9A Ductile Iron Cover & Frame M 60 x 60 GJ En124 B125 56mm e d b 686mm COVER FRAME 2/ Chains C-Daylight Opening 600mm 5
7 Type 9D COVER & FRAME CLASS B Kn 9D B Kn Type 9D Ductile Iron Cover & Frame GJ M60 x 45 EN124 B mm SG a COVER 686mm 686mm 56mm e d FRAME C-Daylight Opening 2/ Chains Type 8 HINGED GRATE & FRAME CLASS C Kn C Kn Table 8 Ductile Iron Hinged Grate & Frame 641mm Frame Grate 597mm Frame 506mm 6 EN mm Grate C250
8 DISCLAIMER Whilst every care was taken in compiling this data, information and related material contained herein are subject to change without notification. All detail that this document contains are provided in good faith and therefore no representation or warranty whatsoever regarding the completeness, accuracy, up to date, or adequacy of, suitability, functionality, ommission, or operation is specifically disclaimed of any liability for direct, indirect or consequential loss or damage, however so arising, from the use or reliance on information herein thereafter provided. INCLEDON BLOEMFONTEIN Tel: BURGERSFORT Tel: GERMISTON Tel: KATHU Tel: KLERKSDORP Tel: DURBAN Tel: LEPHALALE Tel: DPI TRADING (Western Cape) CAPE TOWN Tel: GEORGE Tel: NELSPRUIT Tel: EAST LONDON Tel: PORT ELIZABETH Tel: POLOKWANE Tel: RUSTENBURG Tel: SECUNDA Tel: UPINGTON Tel: WELKOM Tel:
Covers & Frames. Ductile Iron. Manhole Covers. Frames. Specification SANS : Value, Performance & Quality PROUDLY SUPPLIED BY
Covers & Frames Ductile Iron Manhole Covers & Frames Specification SANS 50124 : 1994 Value, Performance & Quality DPI Trading PROUDLY SUPPLIED BY www.dpitrading.co.za www.incledon.co.za Mechanical Properties
Cast Iron. General Purpose. Valves. Value. Performance. Quality VALVES WAFER TYPE VALVES CAST IRON VALVES PRODUCT CATALOGUE
Value, Performance, Quality PRODUCT CATAOGUE Cast Iron General Purpose Valves Value Performance Quality WAFER TYPE CAST IRON DPI Trading CONFIDENCE IN VAVE TECNOOGY PROUDY IMPORTED BY www.dpitrading.co.za
DUCTILE IRON. Manhole Covers, Gratings & Surface Box
DUCTILE IRON Manhole Covers, Gratings & Surface Box BS-EN-124 IS:1726 Quality Policy We are committed to produce quality Products (C.I., D.I., C.S. Valves, Pipes, Fittings, Manhole Covers, Surface box
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33868-8 SOUTH AFRICAN NATIONAL STANDARD Cast iron surface boxes and manhole and inspection covers and frames Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag
Manhole Tops and Drainage Gratings
General page 1. Standard for manhole tops The official Standard for manhole tops in Israel is IS 489 (2003). This Standard is almost identical, except for a few minor differences, to European Standard
eccles (UK Foundries FE) Limited Product Guide
eccles (UK Foundries FE) Limited Product Guide Welcome to the Eccles UK Foundries Ltd Product Guide Eccles UK foundries Ltd is a leading specialist manufacturer and supplier of ductile iron access covers
The system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433
The system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433 it is made up of a channel - entirely made from HD-PE - which needs no strengthening frame it has a wide usable
Selection, installation and USage of HatcHeS
Selection, installation and USage of HatcHeS Tech NoTe Hatches for utility structures are manufactured from cast iron, aluminum and steel. The casting requirements, in regard to concrete cover and required
Rodding Eye Details. Inspection Chambers
Rodding Eye Details Inspection Chambers 1 2 Deep Inspection Chambers BS7158:2001 Installation Procedures 1. Excavate to the required depth for the Polypipe Non Man Entry Deep Inspection Chamber system
תעלות Channels. Special channels. Channels. Uses 1. Drainage channels. 2. Channels for electricity and control cables. 3. Channels for pipes.
Special channels Uses 1. Drainage channels. 2. for electricity and control cables. 3. for pipes. Materials The channels are manufactured from B-40 reinforced concrete. 12 13 14 15 16 17 18 19 21 Structure
Bridge Drainage Systems
Bridge Drainage Systems 2 Bridge drains made of cast iron, durable and reliable in use 3 One of the most important preconditions for the perfect functioning of bridge structures is the fast drainage of
Grey and Ductile Iron Utility and Construction Industry Castings. Quality Castings. Manufactured in the UK
Grey and Ductile Iron Utility and Construction Industry Castings Quality Castings Manufactured in the UK Reliable, CostEffective Reliable, costeffective, UK based manufacturing At Thomas Dudley, we understand
NELSON CITY COUNCIL INFRASTRUCTURAL ASSETS SD 601 APPROVED SENIOR EXECUTIVE INFRASTRUCTURE
SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 601 SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 602 SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 603 SENIOR EXECUTIVE INFRASTRUCTURE DATE SD 604 NOTES 1. PRE-FORMED PLASTIC
Lightweight Design. Designing a lighter future with Advanced Cast Iron. Text Text. Enrico Veneri Business & Technology Development
Lightweight Design Designing a lighter future with Advanced Cast Iron Enrico Veneri Business & Technology Development 1 Agenda Material Typical material properties Manufacturing processes Typical applications
ACO Civicline CL. Line drainage. ACO product catalogue ACO Civicline CL
ACO ACO product catalogue ACO Introduction ACO Civicline system overview ACO Civicline is a channel drainage system for light to medium duty traffic applications up to load class C 250 according to EN
Glass Reinforced Concrete DRAINAGE CHANNELS
Glass Reinforced Concrete DRAINAGE CHANNELS OVERVIEW PRODUCTS A 125 B 125 C 250 D 400 E 600 F 900 MINI A with -slot grating MINI B with mesh grating TOP 100 A-C with slotted galvanised steel grating and
Central Concrete Product Limited. Product Catalogue
January 2007 Concrete Pipes Reinforced Concrete Pipe Internal Wall Thickness Pipe Strengths Pipe Pipe Weight Diameter (mm) Length (kg) (mm) B Wall C Wall B Wall C Wall (mm) B Wall C Wall 300 50 n/a Class
INFO 1/2015. NEWS Outdoor drainage system Universal wall concealed trap New softclose toilet seat Colored toilet seats. INNOVATION New odour trap
INFO 1/2015 www.alcaplast.com S Outdoor drainage system Universal wall concealed trap New softclose toilet seat Colored toilet seats INNOVATION New odour trap OUTDOOR DRAINS ALCAPLAST brings a modern and
ACO Water Management: Urban + Landscape
ACO Water Management: Urban + Landscape Uniclass L567 CI/SfB (7.) EPIC E48 ACO Universal Channel Gully 4 Provides fast and simple connection for all ACO channels up to 00mm bore width 4 Modular system
DOC NO. ISSUE Page Date. GVTG of LARGE COLUMN ASSEMBLY & INSTALLATION DIAGRAM GENERAL
of 5.0 GENERAL The purpose of this technical procedure is to detail those actions necessary to ensure that Large Columns are joined in compliance with the applicable design standards. Columns come in tapered
Cast Iron Valves and Strainers
Cast Iron Valves and Strainers Proven reliability Robust design Economical Cast Iron Gate Valve F I G G A 1 4 G A T E V A L V E Heavy duty design Dezincification resistant trim Outside screw and yoke,
Water Technology for Living Environments. Manhole Covers and gully gratings made of ductile iron P-TOP (R) DRAINEX (R)
Water Technology for Living Environments Manhole Covers and gully gratings made of ductile iron P-TOP (R) DRAINEX (R) P-TOP / DRAINEX Philosophy Ductile Iron Ductile iron behaves elastically over a considerable
FLAT. The system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433
The system: it supports 3 load classes (A15, B125, C250) in compliance with Standard EN 1433 it is made up of a channel - entirely made from HD-PE - which needs no strengthening frame it has a wide usable
Althon slot channels Althon
Effectively innovative. Althon slot channels - the solid drainage system! Althon slot channels Althon Drainage systems Althon slot channels high resilience high performance! The Althon slot channel is
Defence ] Defence 9/14 A DIVISION OF STRONGFORM GROUP
![Defence ] Defence 9/14 A DIVISION OF STRONGFORM GROUP](/thumbs/87/96506684.jpg "Defence ] Defence 9/14 A DIVISION OF STRONGFORM GROUP")
] VCI are a SCEC (Security Construction and Equipment Committee) endorsed manufacturer and supplier of Cable Pits and Locking Pit ccess Covers for all ustralian and other high security cable pit projects.
Aluminium Alloy MIC6 Cast Aluminium Tooling Plate
SPECIFICATIONS Commercial 7000 Series The Best of the Best MIC6 Aluminum Cast Plate is a blend of the most desirable features of many individual metals. The result is a cast aluminum plate that meets the
BGZ-S Heavy-duty channel
BGZ-S Heavy-duty channel with SV-system or up to 8 bolts per m Bolting is replaceable Nominal widths: 100, 150, 200, 300, 400, 500 - with SV-system or bolted Special feature of the BGZ-S Heavy-duty channels
2019/2020 OUR STRENGTH YOUR RELIABILITY! STAFIX SECUREVIEW MESH FENCING RELIABLE STRONG SECURE. SECURITY SYSTEMS
ELECTRIC FENCE AND SECURITY CENTRES SECURITY SYSTEMS STAFIX SECUREVIEW MESH FENCING RELIABLE STRONG SECURE OUR STRENGTH YOUR RELIABILITY! 2019/2020 PRODUCT RANGE Our range of products is specifically designed
Material Safety Data Sheet ACO Gratings Covers
ACO GRATINGS & COVERS Material Safety Data Sheet ACO Gratings Covers 1. Product & Company Identification Product name (not exclusive): CivicDrain; DrainMat; Eyeleds; HexDrain; LightPoint; MultiDrain; MultiDrain
HYDRO TECHNICAL DATASHEET
200MM CLEAR OPENING WIDTH POLYMER CONCRETE CHANNEL WITH INTEGRATED CAST IRON EDGE RAIL PRODUCT FEATURES - Drainage channel made of polymer concrete with sealable channel groove. Includes integrated cast
Standard products Tasmania 2010
Standard products Tasmania 2010 Standard products A catalogue of standard products manufactured at Humes Invermay. All products are cast with means of lifting unless otherwise specified. Other products
eccles The new COVER-ALL recessed range Keeping above from below
eccles The new COVER-ALL recessed range Keeping above from below Manufactured to European Standards All models in the new advanced composite range are manufactured to BS EN 124 : 1994, an exacting industry
Manufacturing standard
CI/SfB I I (52.5) I f I I Landscaping Charcon Highway OHS61759 FM96927 EMS96928 Highway is a high capacity combined kerb and drainage system, offering a cost-effective all-in-one alternative to conventional
Testing of Bolted Cold- Formed Steel Connections in Bearing (With and Without Washers) RESEARCH REPORT RP01-4
research report Testing of Bolted Cold- Formed Steel Connections in Bearing (With and Without Washers) RESEARCH REPORT RP01-4 MARCH 2001 Committee on Specifications for the Design of Cold-Formed Steel
ENMAT101A Engineering Materials and Processes Associate Degree of Applied Engineering (Renewable Energy Technologies) Lecture 15 Cast Iron
ENMAT101A Engineering Materials and Processes Associate Degree of Applied Engineering (Renewable Energy Technologies) Lecture 15 Cast Iron http://www.sicoconrod.net www.highered.tafensw.edu.au Cast Iron
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
Common Technical Specification for All our Castings
Common Technical Specification for All our Castings Spheriodal Graphite Iron:- SG Iron Castings are manufactured in accordance with the European Standard EN1563:1997, and in the grades tabulated below:
Unique Performance Features
Unique Performance Features Coverland Radenshield Radiant Barriers and Undertile Membrane are installed over the roof truss, under the roof battens and directly beneath the roofing tiles. RADENSHIELD ALUMINIUM
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
P133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
ECO INSTRUMENT (NS M)
Computerized AC Servo Control Universal Material Testing Machine Safety Protection Frame Rubber Type 180 degree grip or 90 degree peel fixture Bending Test Compression Test Specimen Gripping Fixture Product
Effective 01 August 2018
PRICE LIST Effective 01 August 2018 LOOK OUT FOR OUR PRICE REDUCTION ON SELECTED PRODUCTS NEW PRODUCTS AND MORE SIZES ADDED! Saint-Gobain Construction s S.A. (PAM Division) HEAD OFFICE Saint-Gobain Construction
ASME A / CSA B Enamelled cast iron and enamelled steel plumbing fixtures
ASME A112.19.1-2013/ CSA B45.2-13 Enamelled cast iron and enamelled steel plumbing fixtures Legal Notice for Harmonized Standard Jointly Developed by ASME and CSA Group Intellectual property rights and
PLUS. The System: it supports 4 load classes (C250, D400, E600, F900) in compliance with Standard EN designed for composting systems
The System: it supports 4 load classes (C0, D400, E600, F900) in compliance with Standard EN 1433 it is made up of a HD-PE channel with a strengthening frame it is supplemented with a galvanised or stainless
SF-100, SF-150, SF-200, SF-300. Channel drainage for the load classes D 400 to F 900
SF-100, SF-150, SF-, SF-300 Channel drainage for the load classes D 400 to F 900 Contents 04 ANRIN Heavy duty systems Material / Composition / Properties 06 Applications Overview of the load classes 08
SPECIFICATION FOR PLUMMER BLOCKS
IPSS INTER PLANT STANDARD IN STEEL INDUSTRY SPECIFICATION F PLUMMER BLOCKS IPSS:1-01-0-18 (First Revision) Cross Reference IS : 14347-1996 Formally : IPSS:1-01-0-86 0. FEWD 0.1 Interplant standardization
Stainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
Aluminium Alloy Specifications
Aluminium is the world s most abundant metal and is the third most common element comprising 8% of the earth s crust. The versatility of aluminium makes it the most widely used metal after steel. Aluminium
TECHNICAL DESIGN AND INSTALLATION GUIDE THE COMPLETE ENGINEERED SOLUTION FOR TEMPORARY MOVEMENT JOINTS
TECHNICAL DESIGN AND INSTALLATION GUIDE THE COMPLETE ENGINEERED SOLUTION FOR TEMPORARY MOVEMENT JOINTS LOW COST, ECONOMICAL, TECHNICAL AND PRACTICAL SOLUTION. FULLY SEALED SYSTEM. FULLY GROUTED SYSTEM
Concrete channels for professionals.
Concrete channels for professionals. Versatile application - technically perfected - for highest requirements. BGU-Z Universal channels SV BGZ-S Heavy-duty channels SV Concrete channels - product range
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS FOR FRAMES & COVERS OF JOINTING CHAMBERS SPECIFICATIONS NO. Access Networks Division Qatar Telecom (Qtel) P.O. Box 217, Doha, State of Qatar Revision No.: 1, June 2006 CONTENTS
The innovative floor access cover. lighter, easier, composite!
The innovative floor access cover lighter, easier, composite! 2 Composite The innovative access cover DECK No concrete-weight Opening the cover couldn t be easier. You save up to 85kgs of weight in concrete.
Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA Lined Ductile Iron* PFA Lined Ductile Iron* Stem PFA
Stainless Steel Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
SURFACE VEHICLE STANDARD
SURFACE VEHICLE STANDARD J434 Issued 1956-09 Revised 2004-02 REV. FEB2004 Superseding J434 JUN1986 (R) Automotive Ductile (Nodular) Iron Castings 1. Scope This SAE standard covers the minimum mechanical
Fittings and valves. Ductile cast iron pressure fittings. Complete range for almost every application field
Fittings and valves Ductile cast iron pressure fittings Complete range for almost every application field 1 Düker fittings made of cast iron leak-proof, Due to its outstanding material features such as
STRUCTURAL ANALYSIS. PSDS s.r.o. IČ: TRABANTSKÁ 673/18, PRAHA 9. for building permit. March 2012 NUMBER OF PAGES 15
2012 CONSTRUCTION DEGREE for building permit STRUCTURAL ANALYSIS March 2012 PERSON RESPONSIBLE Ing. Jiří Surovec NUMBER OF PAGES 15 PSDS s.r.o. IČ: 280 980 64 www.psds.cz TRABANTSKÁ 673/18, 190 15 PRAHA
Original Design Behind-the-Kerb Applications B Class B - 80
Original Design Behind-the-Kerb Applications B Class B - 80 Metropolitan Bull Nose Roll Over Replacement Drop-in Bolt Down Tab Bull-Nose Integrated Lintel Frame and Lid Unit TF5415-01 Metropolitan Councils
Arch. Metall. Mater., Vol. 61 (2016), No 4, p
Arch. Metall. Mater., Vol. 61 (2016), No 4, p. 1833 1838 DOI: 10.1515/amm-2016-0296 T. Giętka*,#, K. Ciechacki** Modeling of railway wheels made of austempered ductile iron A person is forced to travel
Installation and operation instructions
PURAIN-HD-150/200/300/400 Rainwater filter for sub-surface installation Heavy duty category Installation and operation instructions WATER IS OUR ELEMENT www.intewa.com Contents 1. Introduction and scope
Custom 450 Stainless Steel, UNS S45000
Custom 450 Stainless Steel, UNS S45000 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire Specifications: AMS5763, AMS 5773, AMS 5863, ASTM A 564, ASTM A693, ASTM A 959 Custom 450 Alloy Description
Trench Former 7 HD200 J / 300 J
Trench Former 7 HD200 J / 300 J... Trench Drain Forming System INTERMODAL FACILITIES Photograph by Don Wilson Port Photograph PORTS AIRPORTS Advanced Building Technologies www.abtdrains.com... Today s
Manufacturing standard. Clearway is manufactured using a semi dry method tested in accordance with European Standard BS EN 1433.
CI/SfB I I (52.5) I f I I Landscaping Charcon Clearway OHS61759 FM96927 EMS96928 A concealed linear drainage system with a discrete cross-fall which directs surface water to a drainage entrance. Specifically
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 430 UNS S43000 EN 1.4016 INTRODUCTION 430 SS is a plain chromium ferritic stainless steel. With 17% chromium, the steel has good
SIBCO SNI housings. Optimized solutions designed for maximum reliability and minimal maintenance. The Power of Knowledge Engineering
SIBCO SNI housings Optimized solutions designed for maximum reliability and minimal maintenance The Power of Knowledge Engineering Engineered for optimized performance SKF in India today provides industry
Custom 455, UNS S45500
Custom 455, UNS S45500 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Specifications: AMS 5617, AMS 5860, ASTM A313 ASTM A564, ASTM A693 Custom 455 Alloy Description Custom 455 stainless
Global Roofing Solutions Zip-Tek 420 TM
GRS Zip-Tek 420 Global Roofing Solutions Zip-Tek 420 TM Talk to THE SMART ROOF PEOPLE Visit www.globalroofs.co.za or email info@globalroofs.co.za GRS Zip-Tek 420 GRS Zip-Tek 420 07/17 Typical Specification
Solidfeel Access Flooring v1.0 (1 October 2012) 1
Solidfeel Access Flooring v1.0 (1 October 2012) 1 PRODUCT BRAND MANUFACTURER APPLICATION Specification Details Panel Type Understructure Type SOLIDFEEL ACCESS FLOORING PENTAFLOOR CC SOLIDFEEL 45 (SF45)
Stacker Parts List. For printer model: TG3 Series PN: (A)
Stacker Parts List For printer model: TG3 Series PN: 9001229(A) www.satoamerica.com Copyrights The contents of this document are proprietary information of SATO Corporation and/or its subsidiaries in Japan,
Assembly and Usage Instructions Z 600 S-PLUS mobile scaffold tower with stabilisers Z 600 S-PLUS folding scaffold unit COMPACT
09/2016 No. 291358 en Assembly and Usage Instructions Z 600 S-PLUS mobile scaffold tower with stabilisers Z 600 S-PLUS folding scaffold unit COMPACT 2 Contents en 1 General information... 4 1.1 Introduction...4
Introduction. Installation
ADVANCE CONCRETE & PRE-CAST HOLDING PTY LTD A.C.N.083 235 536 50 Victoria street Riverstone N.S.W. P.O Box130 Riverstone n.s.w. 2765 Phone 02 96276476 fax 02 96276478 Introduction To supply Grease Traps
Adoptable and Non-Adoptable Assemblies.
Access and Inspection Chambers Adoptable and Non-Adoptable Assemblies www.brettmartin.com New render DRAINAGE PLUMBING RAINWATER ROOFING DRAINAGE PLUMBING DRAINAGE SYSTEMS Brett Martin s Plumbing and Drainage
RECOMMENDATIONS FOR OBTAINING SAMPLES OF CASTING PARTS MECHANICAL CHARACTERISTICS FUNDICIONES FUMBARRI-DURANGO. 15/04/2013 Rev.
RECOMMENDATIONS FOR OBTAINING SAMPLES OF CASTING PARTS MECHANICAL CHARACTERISTICS 15/04/2013 Rev.: 01 FUNDICIONES FUMBARRI-DURANGO RECOMMENDATIONS FOR OBTAINING SAMPLES OF CASTING PARTS MECHANICAL CHARACTERISTICS
National Regulator for Compulsory Specifications (NRCS)
National Regulator for Compulsory Specifications (NRCS) 1 SCOPE Mandate Process Flow Regulatory Framework Compulsory Specifications Food Safety Inspections Domestic and Imports Flow Process for Locally
GF Automotive AG Carbon Fiber: A thread or opportunity for Lightweight Castings
AG Carbon Fiber: A thread or opportunity for Lightweight Castings Klaus Decking Georg Fischer Corporation More than 210 years of history, founded in 1802 Three core businesses, Piping Systems, Machining
ISO 2892 INTERNATIONAL STANDARD. Austenitic cast irons Classification. Fontes austénitiques Classification. Second edition
INTERNATIONAL STANDARD ISO 2892 Second edition 2007-05-15 Austenitic cast irons Classification Fontes austénitiques Classification Reference number ISO 2892:2007(E) ISO 2007 PDF disclaimer This PDF file
About Everite and Nutec 2. Nutec Suspended Ceiling Board Features 4. Safety, Handling and Storage 5. General Design Criteria 6
c o n t e n t s About Everite and Nutec 2 Nutec Suspended Ceiling Board Features 4 Safety, Handling and Storage 5 General Design Criteria 6 Nutec Suspended Ceiling Board Product Range 7 Nutec Suspended
ISO 185 INTERNATIONAL STANDARD. Grey cast irons Classification. Fontes à graphite lamellaire Classification. Second edition
INTERNATIONAL STANDARD ISO 185 Second edition 2005-08-15 Grey cast irons Classification Fontes à graphite lamellaire Classification Reference number ISO 185:2005(E) ISO 2005 PDF disclaimer This PDF file
Linear drainage solutions for every application
Over 40 EDITION 3 Linear drainage solutions for every application THE UK S NUMBER ONE CONTENTS TEL: 01733 765316 Introduction Page 3 Domestic Polymer and Polypropylene Ranges Page 4 5 Med-Heavy Duty SE10
About EOH. The EOH purpose. The EOH vision. EOH at a glance
About EOH The EOH purpose To provide the technology, knowledge, skills and organisational ability critical to Africa s development and growth To be an ethical, relevant force for good and to play a positive
MANAGEMENT. Session 2.1 The South African Industrial Emission Profile
INDUSTRIAL EMISSION MANAGEMENT Session 2.1 The South African Industrial Emission Profile Presentation to the 4 th Annual Air Quality Governance Lekgotla, Vanderbijlpark, 12/13 October 2009 Presented by:
Co-extruded 3 Layer Films
Co-extruded 3 Layer Films INTRODUCING THE NEW GUNDLE SABS RANGE OF 3 LAYER CONSTRUCTION MEMBRANES Multi-layer co-extrusion has the following advantages: It has a cross-linking effect between the different
Technische Grundlagen
Technische Grundlagen 47 Technical bases Technical bases for point drainage ACO bath drains are used in areas where there is a demand for functional long-life solutions with high flow volumes combined
MATERIAL SPECIFICATION FOR FRAMES, GRATES, COVERS, AND GRATINGS
ONTARIO PROVINCIAL STANDARD SPECIFICATION OPSS.PROV 1850 APRIL 2018 (Formerly OPSS 1850, April 2013) Note: The PROV published in April 2018 replaces OPSS 1850 COMMON, April 2013 with no technical content
Installation instructions. MEA Drainage systems
Preliminary remarks: The installation instructions given here are to be regarded as general information for the proper installation and operation of MEA channel systems. It is recommended that professional
Effective Date: Revision #: 1. Section I: Castings and Aluminum Covers. Valve Boxes. Service Clean-out Box and Lid
Section I: Castings and Aluminum Covers I 1 I 2 I 3 I 4 Valve Boxes Service Clean-out Box and Lid Manhole Casting/ Standard Ring and Cover Access Covers/ Aluminum 1 I 1 VALVE BOXES: Valve boxes shall meet
Contents. Company description. Company description 1 Product description 2 Reinforcement rebar Couplers 3
C A T A L O G U E Contents Company description 1 Product description 2 Reinforcement rebar Couplers 3 Features 4 Bartek Systems Coupler Dimensions 4 BARTEK SYSTEMS P Parallel rib peeling direct rolling
FRP ECOLITE RANGE Product Information Booklet
FRP ECOLITE RANGE 2015-2016 Product Information Booklet Road Safety Grating 13 Healey Rd Dandenong South VIC 3175 PH: (03) 9238 5888 Fax: (03) 9238 5800 Email: sales@grating.com.au Web: www.grating.com.au
EN1000 EN1500 EN2000 EN3000. Supreme MEADRAIN
Material: Polymer concrete Locking System: PROFIX locking recess Edge Protection: Cast iron edge Accessories: Catchbasins Solid & outlet end caps Installation brackets Chair bracket EN1500 EN2000 EN3000
MATERIAL CLASSIFICATION. Most commun materials used on our plant, the section is divided in casting, forging and steel welded
MATERIAL CLASSIFICATION Most commun materials used on our plant, the section is divided in casting, forging and steel welded CAST IRON MATERIALS Vermicular cast iron In vermicular graphite cast irons,
For more information on ACO Drain visit
Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) Heavy duty channel drainage system ACO S Range ACO S Range CHANNEL DRAINS Load Class BS EN 1433:2002 Optimum solution The ACO S Range is an interconnecting
DPI Plastics the Market Leader APPLICATIONS QUALITY
DPI Plastics the Market Leader DPI Plastics stands at the forefront of plastics technology today and has established itself as a leader and dominant player in the region s quest to bring water and sanitation
International GmbH ALUPURA
International GmbH Recessed covers ALUPURA ALUPURA Recessed covers ALUPURA product line Aluminium manhole-covers with variable surface. The variable surface of ALUPURA recessed-covers make manholes, inspection
Graphite Flake Size Effects to Thermal Durability of Automobile Flywheel Under Forced Slippage
Proceedings of the 3 rd World Congress on Mechanical, Chemical, and Material Engineering (MCM'17) Rome, Italy June 8 10, 2017 Paper No. ICMIE 121 ISSN: 2369-8136 DOI: 10.11159/icmie17.121 Graphite Flake
HR 500 CAST NEW! Solid carbide high-performance reamer for an optimal surface finish. Made by Guhring. universal for GG and GGG as a standard tool
CAST Solid carbide high-performance reamer for an optimal surface finish NEW! universal for GG and GGG as a standard tool Made by Guhring Cast the specialist for an optimal surface finish R 500 CAST Guhring
Zanardi Fonderie S.p.A. INFORMATIONAL SHEET ON AUSTEMPERED DUCTILE IRON - ISO JS/ and ISO JS/ RT -
ISO 17804 JS/80010 and ISO 17804 JS/80010 RT Scope This document is designed to familiarize the designer with Austempered Ductile Iron ISO 17804 Grade JS/80010. It is also valid for the ISO 17804 JS/80010RT
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
Compression characteristics of spheroidal graphite cast iron pipe members
High Performance and Optimum Design of Structures and Materials 455 Compression characteristics of spheroidal graphite cast iron pipe members T. Yamaguchi 1 & Y. Kimura 2 1 HINODE Ltd, Japan 2 New Industry
ISO INTERNATIONAL STANDARD. Microstructure of cast irons Part 1: Graphite classification by visual analysis
INTERNATIONAL STANDARD ISO 945-1 First edition 2008-11-15 Microstructure of cast irons Part 1: Graphite classification by visual analysis Microstructure des fontes Partie 1: Classification du graphite
ACO SELF Euroline. Euroline Polymer concrete drainage channels. Euroline 100 Euroline 150
ACO SELF Euroline Euroline Polymer concrete drainage channels Euroline 100 Euroline 150 Euroline 100 ACO SELF CHANNEL: Typical fields of application ACO Self Channel high strength domestic and residential