Weld Fittings. Ultrahigh-Purity, Specially Cleaned, and Industrial. 1/8 to 1 in. and 6 to 18 mm
|
|
|
- Berniece Pierce
- 6 years ago
- Views:
Transcription
1 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 1 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial WE 1/8 to 1 in. and to 18 mm 31, 31, 31 VR, and 31 VIM-VR stainless steel materials Fittings for manual or automatic welding equipment
2 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE Contents Materials of Construction... 2 Cleaning and Packaging... 2 s asis... 3 Micro-Fit (Miniature utt Weld) Fittings... 3 utt Weld Fittings... utomatic utt Weld Fittings... 9 utomatic Weld Fittings Weld Fittings Pipe Weld Fittings Pipe utt Weld Fittings... 1 Swagelok Orbital Welding System... 1 Materials of Construction Cleaning and Packaging Standard Weld fittings are cleaned in accordance with Swagelok Standard Cleaning and Packaging (SC-10) (MS-0-2). Special (SC 11) Weld fittings are available cleaned and packaged in accordance with Swagelok Special Cleaning and Packaging (SC 11) (MS 0 3), to ensure compliance with product cleanliness requirements as stated in STM G93 evel C. To order, add SC11 to the ordering number. Example: V-4MW--2-SC11 Photovoltaic (SC 0) Select weld fittings are available cleaned and packaged in accordance with Swagelok Photovoltaic Process Specification (SC 0) (MS 0 4) to meet the process requirements of solar cell production. To order, add -SC0 to the ordering number. Example: V-4MW--2-SC0 SC-0 cleaned weld fittings are available with controlled surface finishes and electropolishing. Wetted surfaces are finished to an average 5 µin. (0.13 µm) R a. To order, add P to the ordering number. Example: V-4MW--2P Material esignator Specifications ar Stock➀ 31 stainless steel SS STM 479/SME S stainless steel 31 and STM VIM-VR stainless steel V Forgings➂ SEMI F Ultrahigh-Purity➁ 31 stainless steel SS STM 182/SME S stainless steel 31 and STM 314 ➀ Includes straight configurations and all Micro-Fit weld fittings. ➁ 20 % minimum elongation allowed. ➂ Includes all elbows, crosses, and tees, excluding Micro-Fit weld fittings. dditional Considerations Consult SME oiler and Vessel Code, SME 31.1, SME 31.3, or other applicable codes for information on weld setup, technique, and additional considerations for welded systems. The choice of fitting, pipe, and tubing material being welded is critical. Using the same materials will ensure the same coefficients of expansion and will reduce the possibility of poor welds, out-of-roundness, or dimensional changes that are detrimental to a good weld. Threaded End Connections Pipe threads are based on the requirements of SME (NPT) and SE S71051 (NPT) for tapered pipe threads. Ultrahigh-Purity (SC 01) Select weld fittings are available with controlled surface finishes, electropolished, and specially cleaned. Wetted surfaces are finished to an average 5 µin. (0.13 µm) R a. For more information, see Swagelok Ultrahigh-Purity Process Specification (SC-01) (MS-0-1). To order, add P to the ordering number. Example: V-4MW--2P Cleaning Process vailability Fitting Type Micro-Fit (miniature tube butt weld) Special (-SC11 ) Cleaning Process (esignator) Photovoltaic (-SC0) (P) Ultrahigh- Purity (P) butt weld utomatic tube butt weld utomatic tube socket weld socket weld Pipe socket weld Pipe butt weld Oxygen Service Hazards For more information about hazards and risks of oxygenenriched systems, see the Swagelok Oxygen System Safety Technical Report (MS 0 13).
3 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 3 s asis Catalog pressure ratings shown are for temperatures from 20 to 100 F ( 28 to 37 C), which are based on an allowable stress value of psi (1378 bar) in accordance with SME 31.3 and SME 31.1 for 31 stainless steel. 31 stainless steel material is controlled in accordance with Swagelok material specifications and possesses minimum room temperature tensile and yield strengths equivalent to 31 stainless steel. derating factors for applications at temperatures greater than 100 F (37 C) were determined from these pressure codes and are listed in the table at right. Elevated-Temperature Factors To determine elevated-temperature pressure ratings in accordance with 31.3 and 31.1, multiply the pressure ratings provided in the ordering number tables on the pages that follow by the factors in the table at right. Material Type 31 SS 31 SS Temperature, F ( C) Factor 20 ( 28) to 100 (37) 0 0 Examples: 200 (93) (204) (315) (42) (537) /4 in. 31 VIM-VR reducing union has a pressure rating of psig (351 bar), as shown in the table below. To obtain the pressure rating at 400 F (204 C), multiply psig (351 bar) by 0.77: psig (351 bar) 0.77 = 3927 psig (270 bar) 1/4 in. 31 SS tube socket weld union has a pressure rating of psig (737 bar), as shown in the table on page 13. To obtain the pressure rating at 400 F (204 C), multiply psig (737 bar) by 0.9: psig (737 bar) 0.9 = psig (707 bar) lternative elevated-temperature factors may be chosen from SME 31.3 or 31.1 at the user s discretion. WE Micro-Fit (Miniature utt Weld) Fittings Compact esign ccommodates tubing systems requiring miniaturization llows close component spacing Provides flow and service ratings equal to larger weld fittings. Information and are for reference only and are subject to change. See Cleaning and Packaging, page 2, to order Micro Fit weld fittings cleaned in accordance with Swagelok Special Cleaning and Packaging (SC-11) (MS 0 3); Photovoltaic Process Specification (SC 0) (MS 0 4); or Ultrahigh-Purity Process Specification (SC- 01) (MS-0-1). Rounded body block helps prevent damage to other components during system fabrication or maintenance. Material heat code is roll stamped to ensure raw material traceability. Square, sharp, burrfree tube weld ends enhance alignment, maintain tube wall uniformity, and promote weld repeatability. Marking identifies manufacturer, material, and, when applicable, ultrahigh-purity cleaning. Ultrahigh-purity cleaning with average 5 µin. (0.13 µm) R a surface finish is available. Standard surface finish is average 10 µin. (0.25 µm) R a. Radiused junction allows for a smooth flow transition and eliminates pockets and entrapment zones. Reducing Union 1 1/4 5 1/8 8 V-4MW /8 5 1/4 5 V-MW /4 V-8MW--4 (10.7) (.4) 9 5 3/8 V-8MW--
4 4 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE Micro-Fit (Miniature utt Weld) Fittings 90 Union Elbow F, in. 1/8 8 V-2MW-9➀ 5/ (585) 0.5 (14.2) 1/4 5 V-4MW-9 5/ (.4) 3/8 5 V-MW (17.5) 0.47 (11.9) 9 V-8MW (20.) 9/ (13.5), mm (in.) V-MMW (0.5) 5/ () 420 (095) 8 V-8MMW (0.9) 11.9 (0.47) 310 (4499).4 (0.25) 10 V-10MMW (0.9) 11.9 (0.47) 240 (3483) 12 V-12MMW (0.81) 9/ (0.53) 200 (2902) ➀ 1/8 in. junction not radiused due to small bore size Reducing 90 Union Elbow 3/8 5 1/4 5 V-MW /4 V-8MW /8 V-8MW-9-, mm (in.) V-8MMW-9-M 10 V-10MMW-9-M V-12MMW-9-M 12 8 V-12MMW-9-8M F, in. 0.9 (17.5) 0.81 (20.) 17.5 (0.9) 17.5 (0.9) 20. (0.81) 0.25 (.4).4 (0.25) 9/1 9/ (11.9) 0.53 (13.5) 11.9 (0.47) 11.9 (0.47) 13.5 (0.53) 310 (4499) 240 (3483) 200 (2902) Extended eg 90 Union Elbow / F 1 V-4MW (19.3) 0.25 (11.4) (15.5) V-4MW (14.2) 0.81 (.4) (20.) (12.7) (1.8) 5/1 V-4MW (19.3) 0.45 (11.4) 0.1 (15.5) V-4MW (20.) 0.50 (12.7) 0. (1.8) 45 Union Elbow 1/4 5 V-4MW (11.9) F 5/1 3/8 5 V-MW (14.2) 0.25 (.4) 0.47 (11.9) 9 V-8MW (1.3) 9/ (13.5)
5 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 5 Micro-Fit (Miniature utt Weld) Fittings Union Tee F, in. 1/8 8 V-2MW-3 5/ (585) 0.82 (20.8) 1/4 5 V-4MW-3 5/ (.4) 3/8 5 V-MW (23.9) 0.47 (11.9) 9 V-8MW-3 (2.9) 9/ (13.5), mm (in.) V-MMW (0.82) 5/ () 420 (095) 8 V-8MMW (0.94) 11.9 (0.47) 310 (4499).4 (0.25) 10 V-10MMW (0.94) 11.9 (0.47) 240 (3483) 12 V-12MMW () 9/ (0.53) 200 (2902) WE Extended ranch eg Union Tee 1/4 5 V-4MW F (20.8) 0.7 (19.3) 0.25 (.4) 0.45 (11.4) 5/1 0.1 (15.5) Extended Run eg Union Tee There may be a slight mismatch between run ends at drill intersection. 1 1 F 1 1/4 5 V-4MW (49.8) 0.5 (14.2) 0.83 (21.1) 0.25 (.4) 5/ (24.9) Reducing Tee 3/8 5 1/4 9 V-MW /4 5 V-8MW /8 V-8MW-3-8- F, in (23.9) (2.9) 0.25 (.4) 9/ (11.9) 0.53 (13.5) 10 12, mm (in.) V-10MMW-3-10M-M 23.9 (0.94) V-12MMW-3-12M-M 8 V-12MMW-3-12M-8M 2.9 ().4 (0.25) 9/ (0.47) 13.5 (0.53) 240 (3483) 200 (2902)
6 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE Micro-Fit (Miniature utt Weld) Fittings Union Cross F, in. 1/8 8 V-2MW-4 5/ (585) 0.82 (20.8) 1/4 5 V-4MW-4 5/ (.4) 3/8 5 V-MW (23.9) 0.47 (11.9) 9 V-8MW-4 (2.9) 9/ (13.5), mm (in.) V-MMW (0.81) 5/ () 420 (095) 8 V-8MMW (0.47) 310 (4499) 23.9 (0.94).4 (0.25) 10 V-10MMW (0.47) 240 (3483) 12 V-12MMW () 9/ (0.53) 200 (2902) Tribow This unique design has weld ends in three planes at 90 to each other. It permits greater flexibility in designing systems, especially where space is limited. F flat 1/4 5 V-4MW (14.2) 3/8 5 V-MW (17.5) 9 V-8MW (20.), mm (in.) 14.2 V-MMW-91 (0.5) F, in (.4).4 (0.25) 5/1 9/1 5/ (11.9) 0.53 (13.5) 10.4 () 420 (095) utt Weld Fittings Information and are for reference only and are subject to change. See Cleaning and Packaging, page 2, to order tube butt weld fittings cleaned in accordance with Swagelok Special Cleaning and Packaging (SC-11) (MS 0 3); Photovoltaic Process Specification (SC 0) (MS 0 4); or Ultrahigh-Purity Process Specification (SC-01) (MS-0-1). Standard surface finish is average 10 µin. (0.25 µm) R a. Controlled surface finish is available for ultrahigh-purity systems. ends are machined with a square face and corners to enhance alignment and maintain tube wall uniformity. Precisely finished diameter matches tube diameter. 90 Union Elbow 1/ T7-9 F, in. 3/ T (30.5) T (34.0) 3/ T7-9 15/1 1.4 (37.1) 2400 (15), mm (in.) 31-MT () 420 (095) MT () 310 (4499) MT () 34.0 (1.34) 240 (3483) MT (1.34) 200 (2902) MT7-9 15/1 37. (1.48) 200 (2902)
7 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 7 utt Weld Fittings Reducing Union 3/8 5 1/ T7--4 1/4 31-8T /8 31-8T / T7--8 (38.1) 2400 (15) T /4 31-1T7--12, mm (in.) 31-10MT7--M MT7--8M 31-12MT7--M MT7--8M MT7--10M 31-18MT7--M MT7--12M 38.1 (1.50) 19.0 () 2400 (15) 240 (3483) 200 (2902) 200 (2902) WE Union Tee 1/ T (2.5) F, in. 3/ T () 1.20 (30.5) T (8.1) 1.34 (34.0) 3/ T (73.9) 15/1 1.4 (37.1) 2400 (15), mm (in.) 31-MT (2.4) 31.2 () 420 (095) MT (2.4) 31.2 () 310 (4499) MT (2.7) 19.0 () 34.0 (1.34) 240 (3483) MT (2.7) 34.0 (1.34) 200 (2902) MT (2.95) 15/1 37. (1.48) 200 (2902)
8 8 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE utt Weld Fittings Reducing Tee 1 3/8 5 1/4 9 3/ T /4 31-8T / T / T / T , mm (in.) 31-8MT7-3-8M-M 31-10MT7-3-10M-M MT7-3-10M-8M F, in (0.7) 2.7 (7.8) 2.91 (73.9) 2.2 (2.45) 7.8 (2.7) 19.0 () 1.20 (30.5) 1.34 (34.0) 15/1 1.4 (37.1) 1.34 (34.0) 1.35 (34.3) () 34.0 (1.34) (37.) (15) (37.) 310 (4499) 240 (3483) 200 (2902) MT7-3-12M-M MT7-3-12M-8M (2.7) 34.0 (1.34) 200 (2902) Union Cross F, in. 1/ T (2.2) 3/ T (0.7) 1.20 (30.5) T (.3) 1.31 (33.2), mm (in.) 31-MT (2.45) 31.3 () 420 (095) MT (2.45) 31.3 () 310 (4499) 19.0 () MT (2.55) 5/ (1.28) 240 (3483) MT (2.55) 5/ (1.28) 200 (2902) TW Weld Ring TW weld rings are used with tube butt weld fittings. The ring helps align weld joints and adds material to the weld zone during manual or orbital welding. E / TW-R (5.1) 3/8 31--TW-R 31-8-TW-R E M N 0.32 (8.1) 0.42 (10.7) 0.01 (0.25) 0.54 (13.7) M typical N
9 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 9 utomatic utt Weld Fittings Information and are for reference only and are subject to change. See Cleaning and Packaging, page 2, to order automatic tube butt weld fittings cleaned in accordance with Swagelok Special Cleaning and Packaging (SC-11) (MS 0 3); Photovoltaic Process Specification (SC 0) (MS 0 4); or Ultrahigh-Purity Process Specification (SC- 01) (MS-0-1). Standard surface finish is average 10 µin. (0.25 µm) R a. Controlled surface finish is available for ultrahigh-purity systems. Precisely finished diameter matches tube diameter. Integral filler ring aids in alignment. WE ocator Union F 1.9 1/ TW- (42.9) 3/ TW TW- F 1.71 (43.4) 1.73 (43.9) 0.3 (9.1) 0.42 (10.7) 0.0 (15.2) Union 1/ TW- 0 (25.4) 3/ TW- 0 (25.4) TW- 0 (25.4) 3/ TW- 0 (25.4) 0.80 (20.3) 2400 (15) TW (31.8) (2.9) 2400 (15) 31--MTW-, mm (in.) 0.51 ().9 (0.27) 420 (095) MTW- 0.7 () 8.9 (0.35) 310 (4499) MTW (1.25) 0.7 () 10.9 (0.43) 240 (3483) MTW- () 13.2 (0.52) 200 (2902) MTW- () (2902) Reducing Union 1 1 3/8 5 1/ TW / TW / TW-- 3/ TW (40.1) 1.58 (40.1) 1.2 (41.1) 0.80 (20.3) 2400 (15), mm (in.) 31-8-MTW--M (1.57) () () (0.35) (0.27) (4499) MTW--M (1.58) () () 13.2 (0.27) 200 () (0.52) (2902) MTW--8M (1.59) () (0.35)
10 10 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE utomatic utt Weld Fittings Swagelok Fitting to utomatic Weld Connector 1 1/4 1/ TW (44.2) 3/8 3/ TW (4.7) TW (50.5) (15.2) 0. (1.8) 0.90 (22.9) 90 Union Elbow 1/ TW-9 3/ TW TW-9 3/ TW TW-9 F, in. 0.9 (24.4) 15/1 1 1/ (31.8) 1.38 (35.1) 1.50 (38.1) 1.89 (48.0) 0.80 (20.3) (2.9) 2400 (15) 2400 (15) 31--MTW MTW MTW MTW MTW-9, mm (in.) 19.0 () 0.51 () 0.7 () 0.7 () () () 15/ (1.25) 32.0 (1.2) 34.8 (1.37) 35.1 (1.38) 38. ( (0.27) 8.9 (0.35) 10.9 (0.43) 13.2 (0.52) 19.3 ( () 227 () 254 () 199 (2888) 20 (2989 Union Tee 1/ TW-3 3/ TW TW-3 3/ TW TW-3 F, in (3.5) 2.4 (2.5) 2.7 (70.1) 3.00 (7.2) 3.78 (9.0) 0.9 (24.4) 15/1 1 1/ (31.8) 1.38 (35.1) 1.50 (38.1) 1.89 (48.0) 0.80 (20.3) (2.9) 3500 (241) 2400 (15) 2400 (15), mm (in.) 31--MTW (2.50) MTW (2.52) MTW (2.74) () MTW (2.7) MTW (3.04) 0.51 () 0.7 () 0.7 () () () 15/ (1.25) 32.0 (1.2) 34.8 (1.37) 35.1 (1.38) 38. (1.52).9 (0.27) 8.9 (0.35) 10.9 (0.43) 13.2 (0.52) (589) 323 (487) 254 (38) 20 (2989) 20 (2989)
11 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 11 utomatic utt Weld Fittings Reducing Tee K WE /8 5 1/ TW-3--4 (2.5) 9 3/4 9 1/ TW / TW / TW TW F, in. K (70.1) 3.00 (7.2), mm (in.) MTW-3-12MM 70.1 (2.7) 19.0 () 1.25 (31.8) / (38.1) 0.51 () 34.5 (1.3) (35.1) (35.1) (34.8) 1.50 (38.1) 35.1 (1.38) 0.80 (20.3) 13.2 (0.52) 2400 (15).9 (0.27) 200 (2902) Manifold Tee F K 1/ TW-3-4T (3.0) 3/ TW-3-T (1.7) TW-3-8T (9.1) F K 1.20 (30.5) 1.34 (34.0) 1.25 (31.8) 1.38 (35.1) Reducing Tee K 3/8 5 1/ TW-3--4T7 (2.5) 1/ TW-3-8-4T7 3/ TW-3-8-T7 F K 2.7 (70.1) 1.3 (34.5) (35.1) (34.3)
12 12 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE utomatic utt Weld Fittings Union Cross / TW-4 (3.5) 3/ TW TW-4 F, in. 2.4 (2.5) 2.70 (8.), mm (in.) MTW-4 (2.50) () MTW-4 (2.52) 0.51 () 0.7 () 5/ (31.8) 1.35 (34.3) 31.8 (1.25).9 (0.27) 8.9 (0.35) 420 (095) 310 (4499) utomatic Weld Fittings Information and are for reference only and are subject to change. See Cleaning and Packaging, page 2, to order automatic tube socket weld fittings cleaned in accordance with Swagelok Special Cleaning and Packaging (SC-11) (MS 0 3). Precise machining of socket ensures proper tube fit. Thin wall reduces weld heat input. Union E 1/ SW- E 0.19 (4.8) 0.38 (9.7) 800 (48) 3/8 31--SW (7.9) 0.50 (12.7) 4900 (337) 31-8-SW- (25.4) 0.38 (9.7) 0.3 (1.0) 3800 (21) 3/ SW (11.2) 0.3 (1.0) 0.88 (22.4) 2700 (18) Union Tee E 1/ SW-3 3/8 31--SW SW-3 3/ SW-3 E F 2.4 (2.5) 2.8 (8.1) 2.8 (8.1) 2.94 (74.7) 0.31 (7.9) 0.38 (9.7) 0.44 (11.2) 0.19 (4.8) 0.3 (1.0) 15/ (34.0) 1.34 (34.0) 1.47 (37.3) 0.38 (9.7) 0.50 (12.7) 0.3 (1.0) 0.88 (22.4) 800 (48) 4900 (337) 3800 (21) 2700 (18)
13 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 13 Weld Fittings Information and are for reference only and are subject to change. See Cleaning and Packaging, page 2, to order automatic tube socket weld fittings cleaned in accordance with Swagelok Special Cleaning and Packaging (SC-11) (MS 0 3). Precise machining of socket ensures proper tube fit. WE Union E E 1/4 SS-4-TSW (4.8) 0.48 (12.2) (737) 3/8 SS--TSW (22.4) 0.31 (7.9) 0.0 (15.2) (558) SS-8-TSW- (2.9) 0.38 (9.7) 0.73 (18.5) 00 (454) 3/4 SS-12-TSW (33.3) 0.44 (11.2) 0.3 (1.0) 4 (2.4) (40) 1 SS-1-TSW (3.) 0.2 (15.7) 0.88 (22.4) 1.3 (34.5) 5 00 (385) Male Connector E Male NPT E F 1/4 1/4 SS-4-TSW (29.2) 0.19 (4.8) 9/ (12.2) 8000 (551) 3/8 1/4 SS--TSW-1-4 5/ (551) 1.25 (31.8) 3/8 SS--TSW (7.9) 0.0 (15.2) 7800 (537) SS--TSW (37.3) 7/ (530) 1/4 SS-8-TSW (33.3) 3/8 SS-8-TSW (9.7) 0.38 (9.7) SS-8-TSW (38.9) 7/8 3/ (18.5) 00 (454) Female Connector E Female NPT E F 1/8 1/8 SS-2-TSW (21.1) 0.10 (2.5) 0.09 (2.3) 9/1 500 (447) 1/4 1/8 SS-4-TSW (2.7) 9/1 500 (447) 0.19 (4.8) 0.48 (12.2) 1/4 SS-4-TSW (30.0) 3/4 00 (454) 3/8 1/4 SS--TSW (31.5) 0.31 (7.9) 3/4 0.0 (15.2) 00 (454) 3/8 SS-8-TSW (34.5) 7/ (35) 0.38 (9.7) 0.73 (18.5) SS-8-TSW (40.4) 1 1/ (337) 3/4 3/4 SS-12-TSW (43.9) 0.44 (11.2) 0.3 (1.0) 1 5/1 4 (2.4) 400 (31)
14 14 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE Weld Fittings 90 Union Elbow E E F 1/4 SS-4-TSW (4.8) 0.8 (21.8) 0.53 (13.5) (737) 3/8 SS--TSW (7.9) 4 (2.4) 0.4 (1.3) (558) SS-8-TSW (9.7) 1.17 (29.7) 0.81 (20.) 00 (454) 3/4 SS-12-TSW (11.2) 0.3 (1.0) (39.) 1.12 (28.4) (40) 1 SS-1-TSW (15.7) 0.88 (22.4) 1 1/ (48.8) 1.44 (3.) 5 00 (385) 90 Male Elbow E 1 Male NPT 1/4 1/4 SS-4-TSW-2-4 3/8 1/4 SS--TSW-2-4 E F (4.8) /8 SS--TSW-2- (7.9) SS--TSW /1 SS-8-TSW (9.7) 13/ (20.1) 4 (2.4) 0.97 (24.) 2 (25.9) 8 (27.4) 5 (2.7) 5 (2.7) 1.17 (29.7) 1.45 (3.8) 1.45 (3.8) 0.48 (12.2) 0.4 (1.3) 0.0 (15.2) 0.0 (15.2) 0.73 (18.5) 8000 (551) 8000 (551) 7800 (537) 7700 (530) 00 (454) 90 Female Elbow E 1 Female NPT 1/4 1/4 SS-4-TSW-8-4 3/8 E F (4.8) 1/4 SS--TSW SS--TSW-8-8 (7.9) 1 SS-8-TSW (9.7) (22.9) 0.99 (25.1) 1.13 (28.7) 1.19 (30.2) 1.17 (29.7) (12.2) (29.7) (15.2) (39.) 1.5 (39.) 0.73 (18.5) 7400 (509) 7400 (509) 5700 (392) 5700 (392) Union Tee E F E 1/8 SS-2-TSW-3 1/4 SS-4-TSW-3 3/8 SS--TSW-3 SS-8-TSW-3 3/4 SS-12-TSW-3 1 SS-1-TSW (30.0) 1.72 (43.7) 2.08 (52.8) 2.34 (59.4) 3.12 (79.2) 3.84 (97.5) 0.10 (2.5) 0.31 (7.9) 0.38 (9.7) 0.44 (11.2) 0.2 (15.7) 0.09 (2.3) 0.19 (4.8) 0.3 (1.0) 0.88 (22.4) 1 1 1/ (15.0) 0.8 (21.8) 4 (2.4) 1.17 (29.7) 1.5 (39.) 1.92 (48.8) 0.53 (13.5) 0.4 (1.3) 0.81 (20.) 4 (2.4) 1.45 (3.8) (88) (737) (558) 00 (454) (40) 5 00 (385)
15 Weld Fittings Ultrahigh-Purity, Specially Cleaned, and Industrial 15 Weld Fittings Union Cross E F E F 1/4 SS-4-TSW-4 3/8 SS--TSW-4 SS-8-TSW-4 3/4 SS-12-TSW-4 1 SS-1-TSW (43.7) 2.08 (52.8) 2.34 (59.4) 3.12 (79.2) 3.84 (97.5) 0.31 (7.9) 0.38 (9.7) 0.44 (11.2) 0.2 (15.7) 0.19 (4.8) 0.3 (1.0) 0.88 (22.4) 1 1 1/4 0.8 (21.8) 4 (2.4) 1.17 (29.7) 1.5 (39.) 1.92 (48.8) 0.53 (13.5) 0.4 (1.3) 0.81 (20.) 1.20 (30.5) 1.45 (3.8) (737) (558) 00 (454) (40) 5 00 (385) WE utt Weld to Weld E E 1/4 3/8 3/ (2.0) 0.07 (1.8) 0.09 (2.2) 0.11 (2.8) 0.13 (3.2) 1/8 SS-4-MTW--2TSW 1/4 SS--MTW--4TSW 1/4 SS-8-MTW--4TSW 3/8 SS-8-MTW--TSW 0.5 (14.2) 0.88 (22.4) SS-12-MTW--8TSW 1.12 (28.4) SS-1-MTW--8TSW 1.38 (35.1) 0.10 (2.5) 0.31 (7.9) 0.38 (9.7) 0.38 (9.7) 0.09 (2.3) 0.19 (4.8) 0.19 (4.8) 0.33 (8.3) 0.48 (12.2) (88) (54) (12.7) (51) (15.2) 0.73 (18.5) 300 (434) (35) Pipe Weld Fittings Information and are for reference only and are subject to change. See Cleaning and Packaging, page 2, to order pipe socket weld fittings cleaned in accordance with Swagelok Special Cleaning and Packaging (SC-11) (MS 0 3). Union Px P E P Pipe 1/4 SS-4-PSW- 3/8 SS--PSW- SS-8-PSW- 3/4 SS-12-PSW- 1 SS-1-PSW- E Px (2.9) 1.12 (28.4) 1.12 (28.4) 1.75 (44.4) 1.75 (44.4) Quality machining of all surfaces ensures consistent welding to pipe (9.9) 0.39 (9.9) 0.39 (9.9) 0.51 (13.0) 0.51 (13.0) Heavy wall, plus strength of material, ensures long life in severe service applications. 0.3 (9.1) 0.49 (12.4) 0.2 (15.7) 0.82 (20.8) 5 (2.7) 0.88 (22.4) 3 (2.2) 1.25 (31.8) 1.47 (37.3) 1.8 (47.2) 8100 (558) 7100 (489) 800 (48) 5800 (399) 100 (420) depth equals or exceeds requirements of SME 1.11 and ensures proper pipe support.
16 1 Weld, VCR, VCO, Pipe, and Vacuum Fittings WE Pipe utt Weld Fittings Information and are for reference only and are subject to change. See Cleaning and Packaging, page 2, to order pipe butt weld fittings cleaned in accordance with Swagelok Special Cleaning and Packaging (SC-11) (MS 0 3). 37 chamfer ensures proper weld (not included on 1/4 in. size). Male weld end can be butt or socket welded. Weld to Pipe utt Weld 37 E 1/4 3/8 Pipe (Sch 80) E 1/4 SS-4-MPW--4TSW 0.88 (22.4) (709) 0.19 (4.8) 0.48 (12.2) SS-8-MPW--4TSW 1.12 (28.4) (537) 3/8 SS--MPW--TSW 3 (2.2) (558) SS-8-MPW--TSW 1.12 (28.4) (537) 0.31 (7.9) 0.0 (15.2) 3/4 SS-12-MPW--TSW 1.50 (38.1) 00 (454) 1 SS-1-MPW--TSW 1.38 (35.1) 000 (413) 3/8 SS--MPW--8TSW 0 (25.4) 0.38 (9.7) 0.42 (10.7) 00 (454) SS-8-MPW--8TSW 1.19 (30.2) 0.38 (9.7) 00 (454) 0.73 (18.5) 3/4 SS-12-MPW--8TSW 1.50 (38.1) 0.38 (9.7) (10.3) 00 (454) 1 SS-1-MPW--8TSW 1.5 (39.) 0.44 (11.2) 0.38 (9.7) 000 (413) 3/4 3/4 SS-12-MPW--12TSW 1.50 (38.1) 0.44 (11.2) 0.2 (15.7) 5 (2.7) (40) Swagelok Orbital Welding System See the Swagelok Welding System M200 Power Supply catalog (MS ) for more information. MS , RevM, ecember 2017
17 bout this document Thank you for downloading this electronic catalog, which is part of General Product catalog Swagelok published in print. This type of electronic catalog is updated as new information arises or revisions, which may be more current than the printed version. Swagelok Company is a major developer and provider of fluid system solutions, including products, integration solutions and services for industry research, instrumentation, pharmaceutical, oil and gas, power, petrochemical, alternative fuels, and semiconductor. Our manufacturing facilities, research, service and distribution facilities support a global network of more than 200 authorized sales and service centers in 57 countries. Visit to locate your Swagelok representative and obtain any information on features, technical information and product references, or to learn about the variety of services available only through authorized sales centers and service Swagelok. Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Warranty Information Swagelok products are backed by The Swagelok imited ifetime Warranty. For a copy, visit your Swagelok Web site or contact your authorized Swagelok representative. Swagelok, Ferrule-Pak, Goop, Hinging-Colleting, IGC, Kenmac, Micro-Fit, Nupro, Snoop, Sno-Trik, SWK, VCO, VCR, Ultra- Torr, Whitey TM Swagelok Company flas TM sahi Glass Co. td. -XN TM llegheny udlum Corporation utoc TM utodesk, Inc. CS TM Canadian Standards ssociation evicenet TM V Kalrez, Krytox TM upont Elgiloy TM Elgiloy Specialty Metals FM TM FM Global Grafoil TM GrafTech International Holdings, Inc. MC TM MC Valves Inc. Microsoft, Windows TM Microsoft Corp. NCE TM NCE International Nitronic TM K Steel Corporation picofast TM HansTurck KG Pillar TM Nippon Pillar Packing Company, td. Rapid Tap TM Relton Corporation 15-7 PH, 17-7 PH TM K Steel Corp. Sandvik TM Sandvik Silconert TM Silcotek Corporation Simriz TM Freudenberg-NOK SolidWorks TM SolidWorks Corporation 2017 Swagelok Company
Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing
Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing Fractional, Metric, and 1 www.swagelok.com Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing Fractional, Metric, and 316L stainless
Metering Valves. S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service
Metering Valves S, M, L, and 1 www.swagelok.com Metering Valves S, M, L, and Straight-pattern flow coefficients (C v ) from 0.004 to 0.16 Low- and high-pressure service Repeatable vernier handles available
Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
Tubing Data 1 www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing...
Stainless Steel Seamless Tubing and Tube Support Systems
Stainless Steel Seamless Tubing Fractional, Metric, and Imperial Sizes 1 Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation
Leak Detectors, Lubricants, and Sealants
Leak Detectors, Lubricants, and Sealants 1 www.swagelok.com Leak Detectors, Lubricants, and Sealants Products Snoop liquid leak detectors Goop thread lubricants SWAK, PTFE Tape, and PTFE-Free pipe thread
Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing JACKETED /
Multijacketed Tubing, Jacketed Tubing, Insulated Tubing 1 www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, Insulated Tubing Features 1/4 to 6 to 12 tubing sizes available in 316/316L stainless
Subsea Weld Fittings WELD
Subsea Fittings G Series 1 www.swagelok.com Subsea Fittings G Series Excellent corrosion resistance in subsea environments 316L, Alloy 625, and Alloy 2507 fittings are NACE MR0175/ ISO 15156 compliant
Pressure Gauges Industrial and Process
Pressure Gauges Industrial and Process PGI Series 4, 5, 63, 1, 115, and 16 mm (1 1/2, 2, 2 1/2, 4, 4 1/2 and 6 in.) dial sizes ccuracy in accordance with SME, EN, and JIS vailable with a variety of end
Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing
Multijacketed Tubing, Single-Jacketed Tubing, Insulated Tubing 1 www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, Insulated Tubing Features 1/4 to 6 to 12 tubing sizes available in 316/316L
DH Series High Pressure Springless Diaphragm Valves. Special Cleaning and Packaging 316L SS/ASTM A479. Machine finished
V-9 iaphragm Valves iaphragm Valves s Valves & Regulators H Series High Pressure Springless iaphragm Valves Features Metal-to-metal diaphragm seal Elgiloy diaphragm to provide high strength and corrosion
Sanitary Pressure Regulators RHPS Series
www.swagelok.com Sanitary Pressure Regulators RHPS Series Pressure-reducing regulators and tank blanketing regulators 316L stainless steel construction 1/2, 1, and 1 1/2 in. end connections Working pressures
DP Series Low Pressure Pneumatic Diaphragm Valves 316L SS/ASTM A479. Machine finished. FC-01 Standard Cleaning and Packaging
iaphragm Valves iaphragm Valves V-0 P Series ow Pressure Pneumatic iaphragm Valves Features Minimum particle generation and dead space Fully contained seat to provide excellent resistance to swelling and
Pre-Insulated Tubing Bundles
Pre-Insulated Tubing undles 1 www.swagelok.com Pre-Insulated Tubing undles Electric-Traced and Steam-Traced Features Simplified field installation 1/8 to 3/4 in. and 6 to 12 mm seamless or welded tubing
CONOFLOW HIGH-PRESSURE REGULATOR - HP500 Pressure Reducing - Diaphragm Type - High Purity
CONOFLOW HIGH-PRESSURE REGULATOR - HP500 Pressure Reducing - Diaphragm Type - High Purity The HP500 Regulator is a self-contained, diaphragm sensing high purity regulator. A broad offering of materials
Stainless Steel Seamless Tubing and Tube Support Systems
www.swagelok.com Stainless Steel Seamless Tubing and Fractional, Metric, and Imperial Sizes 316 / 316L and 304 / 304L stainless steel Standard instrumentation tubing 1/8 to 2 and 3 to 25 mm sizes Marked
ball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves
7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.
Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness
www.swagelok.com Tubing Data Contents Gas Service...................................... 2 Tubing Installation................................. 2 Suggested Allowable Working Pressure Tables Carbon Steel
SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY
SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY Flow capacity* 200 sccm to 500 slpm (0.007 to 17.6 scfm) Vacuum to 2,300 psig (158 bar) inlet, 100 psig (7 bar) outlet
Process Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
Pressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
SWAGELOK CUSTOM SOLUTIONS
SWAGELOK CUSTOM SOLUTIONS PROVIDED BY SAN DIEGO FLUID SYSTEM TECHNOLOGIES sandiego.swagelok.com UNIQUE CHALLENGES REQUIRE THE RIGHT SOLUTIONS You need a solution uniquely tailored to your needs, and you
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
diaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure
WYATT Orifice flow PrOducTs
WYATT Orifice Differential producers, specifically orifice plates, are used in flow measurement due to their simplicity, ease of installation, tolerance to extreme atmospheric and process conditions, and
Unions, Swivels, Treating Irons & Circulating Heads HAMMER UNIONS
s, Swivels, Treating Irons & irculating Heads HER UNIONS General PRVEEN manufactures Haer s from raw materials in the form of forgings or castings in accordance with service requirements in sizes to "
Standard Tube & Pipe Adapters
Standard Tube & Pipe Adapters 1 to 8 OD Tube Sizes, 1 to 8 NPS Pipe Sizes Aluminum, Stainless Steel, Carbon Steel, Galvanized (Zinc-Coated) Steel. 11, 14, 16 Gauge Tube Wall Thicknesses; Schedule 5, 10,
Pre s sure Re gulators
www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch
diaphragm valves Diaphragm Valves
Diaphragm Valves Index Safety Warning Inside Front Cover 2-way Diaphragm Valves Pneumatic Actuated Valves 4 DV Series- How to Order Matrix 7 Disclaimers Inside Back Cover GO Regulator PO Box 4866 Spartanburg,
Leak Detectors, Lubricants, and Sealants
www.swagelok.com Leak Detectors, Lubricants, and Sealants Products Snoop liquid leak detectors Goop thread lubricants SWAK, PTFE Tape, and PTFE-Free pipe thread sealants 2 Leak Detectors, Lubricants, and
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
JSRLFLP Series. Sanitary Valves JSRLFLP Series Low FlowLow Pressure Gas Reducing Valves
JSRLFLP Series Pressure Reducing Valves for Low Flow and Low Pressure Biopharmaceutical and Parenteral process Gas JSRLFLP is a high purity low flow, regulator designed and built specifically for very
Thermowells. Excellence the World can Measure TM. Temperature Products. Fabricated - Screwed & Flanged Connection. General Description.
Thermowells abricated - Screwed & langed onnection Temperature Products ata sheet : TWELL2/2012 y Wide Range of Materials - Stainless Steels - Exotic Materials y hoice of Process onnections - langed -
Film PEEK and Kapton. Rod / Tube PEEK, OFE Copper, and 304 Stainless Steel
UHV s UHV s Film PEEK and Kapton Features Ultrahigh vacuum compatible Cleaned for vacuum service Temperature specified for each material Specifications Vacuum Range UHV, Ultrahigh vacuum HV, High vacuum
is a registered trade mark of 3M company, Vespel is a registered trade mark of DUPONT, ELGILOY is a registered trade mark of ELGILOY Company.
HOW TO ORDER PART NUMBER M4.1 Example : M4.1V MT 2V1 l / K A/B : B1/4 MS 1 2 3 4 5 6 7 1 - Valve Series and Surface Finish M4.1U Ra 0,15μm EP (6 μin Ra) M4.1V Ra 0,25μm EP (10 μin Ra) M4.1S Ra 0,4μm nonep
Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models
www.swagelok.com Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators 2 Swagelok Pressure Regulator Features Stem Fine-pitch
JSRLFLP Series. Sanitary Valves JSRLFLP Series Low FlowLow Pressure Gas Reducing Valves
JSRLFLP Series Pressure Reducing Valves for Low Flow and Low Pressure Biopharmaceutical and Parenteral process Gas JSRLFLP is a high purity low flow, regulator designed and built specifically for very
Severe-Service Union-Bonnet Needle Valves Special Alloy Materials
www.swagelok.com Severe-Service Union-Bonnet Needle Valves Special Alloy Materials N Series and HN Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with
+91-8048762934 Ratna Exports http://www.ratnaexports.com/ We are engaged in the business of manufacturing, exporting and retailing Industrial Pipes, Forged Fittings and Flanges. Characterized by dimensional
Rosemount 405 Compact Primary Element
September 2014 Rosemount DP Flow Rosemount 405 Compact Primary Element Rosemount 405 Compact Primary Element utilizes an easy to install direct mount primary element assembly. Available with Conditioning
ECTFE System THE PREMIER LEAGUE
ECTFE System THE PREMIER LEAGUE EN Products made of ECTFE PERFECT FOR HIGHEST REQUIREMENTS It would seem that perfection is attained not when no more can be added, but when no more can be removed. Antoine
FORGED FITTINGS, SOCKET-WELDING AND THREADED
SME 16.11-2011 FORE FITTINS, SOKET-WELIN N TREE 1 SOPE N ENERL 1.1 Scope This Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding
Fittings, Materials and Tubing Guide. Instrumentation Products
Fittings, s and Tubing Guide Fittings, s and Tubing Guide Instrumentation Products Single/Double Ferrule Instrument CPI / A-LOK Tube Fittings Introduction Parker CPI / A-LOK Instrumentation Tube Fittings
PACKLESS VALVES. Instrument/Analyzer Products. Catalog 4515/USA April 2003
PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 PACKLESS VALVES Instrument/Analyzer Products Catalog 4515/USA April 2003 table of contents NV55........................ 1-2 Nova
EQT MIDSTREAM DESIGN AND CONSTRUCTION MANUAL DESIGN STANDARD WELDING AND JOINING 3.4 HOT TAP AND BRANCH CONNECTIONS Total Pages: 13
Table of Contents Scope... 845 References... 845 Governmental... 845 EQT Midstream Publications... 845 Industry Standards... 846 Computer Programs... 846 1 Manufactured Branch Connections... 846 1.1 Extruded
Tubes and Pipes. Tubes and Pipes D-02
s and Pipes s and Pipes D-0 D-03 s and Pipes Contents s Tubing Selection Tubing Handling Gas Service Tubing Installation Suggested Allowable Working Pressure Tables Stainless Steel Seamless Tubing Carbon
Materials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
This specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35
The perfect fit for tight spaces
The perfect fit for tight spaces SITRANS FC410 - Performance that fits usa.siemens.com/coriolis Scan to be taken directly to our Coriolis web page. Answers for industry. High accuracy. Small wonder. Scan
Fittings. Elbow Pipe. Specifications:
Elbow Pipe This type of fitting is widely used in piping systems to connect two straight sections of pipes of equal or different nominal diameter and with a curvature at a certain angle to change its direction;
THERMOWELL BASIC TRAINING
THERMOWELL BASIC TRAINING 1 PURPOSE OF TRAINING WHY CONSTRUCTION TESTING INSTALLATION HOW INSTALATION CONSEQUENCES OVERVIEW OF POSSIBLE MODELS Why to use thermowells? Protection of the temperature sensor
THERMOWELL ASSEMBLIES & THERMOWELLS INDEX
THERMOWELL ASSEMBLIES & THERMOWELLS INDEX PAGE General Information & Part Numbering Examples... T2 RTD & T/C Style Thermowell Assemblies RTD'S for Thermowells (RT, RV, R4, RW, R1, R2, R5, or R8)... T3
VENTURI FLOWMETERS. Your First Choice in Intelligent Flow Management...
VENTURI FLOWMETERS Your First Choice in Intelligent Flow Management... VENTURI FLOWMETERS Preso s complete line of Venturis offer reduced operating costs, proven accuracy, and great rangeability. Low permanent
+91-8071803871 Maharashtra Metal (India) http://www.maharashtrametal.co.in/ Maharashtra Metal (India) is a trusted firm engaged in manufacturing and exporting a commendable range of Ferrous and Non Ferrous
precision pipe fittings
Precision Pipe Fittings 8 to sizes 36 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 (864) 574-7966 www.hoke.com Sales-hoke@circor.com Index Safety
Carbon steel or Stainless steel
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure
SPECIFICATION SERVICE SADDLE DOUBLE BALE MODEL 314
SPECIFICATION Body Body Gasket Gasket Bale Assembly Bale Nut Flat Washer Strap Assembly Stud Nut Flat Washer Spherical Washer 1 14 SADDLE ASSEMBLY 16 24 SADDLE ASSEMBLY APPLICATIONS Typical Uses Tapping
ASTM A105/A105M-10. Standard Specification for Carbon Steel Forgings for. Piping Applications ¹
Standard Specification for Carbon Steel Forgings for Piping Applications ¹ 1. Scope :- 1.1 This specification covers forged carbon steel piping components for ambient and higher temperature service in
Pipe. Valves. Fittings. Fasteners. Tube and Tube Fittings. And Much More
Pipe Valves Fittings Fasteners Tube and Tube Fittings And Much More Tubing Sizes Materials 1/16" to 6" Diameter Stainless A269 & A511 Copper Monel Inconel Hastelloy DK Lok Tube Fittings Sizes Products
ASTM Standards for Pipe & Fittings
for Pipe & Fittings There are many International Standards for stainless and carbon steel pipes and fittings. The list below is a basic overview of some of these. For more in-depth details of these Standards
PLASTIC FITTINGS Avenue Edmonton, AB Canada T6E 5Z7. Toll Free: Phone: (780) Fax: (780)
9333 45 Avenue Edmonton, AB Toll Free: 1-800-272-9693 Phone: (780) 436-1930 Fax: (780) 435-4849 info@can-con.com TABLE OF CONTENTS PLASTIC FITTINGS POLYETHYLENE PIPE...- 1 - SERVICE RISERS... - 3 - TRANSITION
º to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
INFO SERVICE CHANGES IN THE STANDARD EN /4
INFO SERVICE CHANGES IN THE STANDARD EN 10253-2/4 en Introduction 4 General Information 5 Terms 7 Comparison pren 10253-2/4:2017 to EN10253-2:2007 / EN10253-4:2008 8 27 Information to be supplied by the
Clean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10
Clean Gas Filter Series Cartridge Type/Disposable Type Disposable type C0 Disposable type B30 Cartridge type 0 20 30 H HW T U B K MG FF M MD MH ME MF ZFC LLB D Cartridge type B0 B20 295 SMC Clean Gas Filter
Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing
www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing Features 1/4 to in. and 6 to 12 tubing sizes available in 316/316L stainless steel and copper Seamless and welded tubing
from concept to reality setting a new course from concept to reality setting a new course
setting a new course setting a new course Since 1983 Cardinal UHP has been supplying the semiconductor industry with piping components that help increase manufacturing efficiency. We introduced many practices
d n g a n a ck a tio cia lica Filters ctio 3 S ctio n n 3 T ctio 2 S ctio 2 T ctio 1 S d C ctio 1 T d C ria 904L rie e S Ordering Number Description
B-16 B-16 FT, FB, FI and FW B-163 Filtration Definitions Sintered element: metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure : 138 Bars (Class
ball valves Ultramite 70 Series Fixed End 2- and 3-way Ball Valves
Fixed End 2- and 3-way Ball Valves Ultramite 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065
From the Technology Leader
UHP Solutions From the Technology Leader Ultra High Purity Stainless Steel Tube Systems and Components for the Semiconductor Industry. A pioneer from the start. Now a technology leader. Electropolished
Pre-Insulated Tubing Bundles
www.swagelok.com Pre-Insulated Tubing undles Electric-Traced and Steam-Traced Features Simplified field installation 1/8 to 3/4 in. and 6 to 12 mm seamless or welded tubing sizes 316 / 316L stainless steel,
PACK YOUR OWN CAPILLARIES FOR HPLC AND MASS SPEC
PACK YOUR OWN CAPILLARIES FOR HPLC AND MASS SPEC Pack micro-columns of various length and diameter Compact design will not tip on the work surface Seals safely at pressures up to 9000 psi * Assembles simply,
DAJA. Contents. Description Page Description Page. Lok to Male Thread. Introduction. Technical Specifications. (MC) Male Connector
Contents Description Page Description Page Introduction 0 Lok to Male 2 Technical Specifications How to Order lokdj Compression Fittings (UU) Union (CU) Conversion Union (RU) Conversion Union (BHU) Bulkhead
Is there a quality difference between seamless and welded tube for clean and ultra-clean applications? By Cor Tiele
Is there a quality difference between seamless and welded tube for clean and ultra-clean applications? By Cor Tiele www.bpe-technology.com Introduction In the Semiconductor, Biotech and Pharmaceutical
Mueller Gas Products. Mueller No Blo Service Tee H17500 o ¾ x ¾, 1 x 1, 1 1/4 x 1 1/4, 2 x 2 o 250 PSIG H17502 o 2 x 2
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller No Blo Service Tee H17500 o ¾ x ¾, 1 x 1, 1 1/4 x 1 1/4, 2 x 2 o 250 PSIG H17502
Sample Purity: The Effect of Sample System Lines and Dead Legs Swagelok Company IFPAC 2013
Sample Purity: The Effect of Sample System Lines and Dead Legs Swagelok Company IFPAC 2013 NeSSI to the Rescue 80% of analyzer problems are due to the sample system Question 1: Why??? Question 2: Can NeSSI
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
Tubing and Pipes.
Tubing and Pipes FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +49 9 900 449 Fax: +49 9 900 449 FITOK, Inc. 4 North Promenade Blvd., Suite 70, Stafford,
Copper-Nickel Products Copper-Nickel Tubing Fittings, Flanges, Sheet, Plate and Rod
Copper-Nickel Products Copper-Nickel Tubing Fittings, Flanges, Sheet, Plate and Rod ALASKAN COPPER WORKS ALASKAN COPPER & BRASS COMPANY C opper-nickel alloys are used in ship board and offshore drilling
Flanges & Fittings. 2.1 Chain Clamp Components & Hardware. 2.2 NW Flanges & Fittings. 2.3 ISO Flanges & Fittings. 2.4 ASA Flanges & Fittings
Flanges & Fittings Section Two. Chain Clamp Components & Hardware. NW Flanges & Fittings.3 ISO Flanges & Fittings.4 S Flanges & Fittings.5 CF Flanges & Fittings.6 Wire Seal Flanges.7 dapter Fittings.8
COMMITTEE CORRESPONDENCE ASME B16-F, FITTINGS
Page 1 of 6 6/14/2016 TO: NOTE FOR RECORD FROM: GUY A. JOLLY SUBJECT: ASME B16.11 HISTORY SPECIFIC TO SW FITTINGS ASA B16.11-1946, 1 ST EDITION, STEEL SOCKET-WELDING FITTINGS 1. This edition did not have
Consolidated* Electromatic* Ball Valves
GE Oil & Gas Technical Specifications 05/2012 3500 Series Consolidated* Electromatic* Ball Valves Provides automatic or manual overpressure startup for steam boiler systems and assists startup and shutdown
Thermometer in stainless steel with vertical stem in stainless steel
Ed.18.01 Design Thermometer in stainless steel with in stainless steel 1.4571 Design EN 13190 Case diameter Dim 63, 100 eller 160 mm Accuracy Class 1,0% acc.to DIN EN 13190 Type Case Glass 5500 = case
ANDERSON GREENWOOD H1 HAND VALVES
Large bore, ⅜ (9.5 mm) diameter orifice, general purpose soft-seated hand valve for pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION A general purpose, soft-seated hand valve designed for
07 SWIVEL JOINTS 268
07 7.01 The Range STRAIGHT SWIVEL JOINT Size : 1/2 to Working Pressure : 250 psi Page 270 90 SWIVEL JOINT Size : 1/2 to Working Pressure : 250 psi Page 271 FLANGED SWIVEL JOINT Size : 1/2 to Working Pressure
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
Calamo High purity products
Calamo High purity products Pure knowledge As one of the world s first manufacturers of electropolished tubes, we have more than 40 years experience in the market for clean and high purity products. Our
GS_-FLANGE SYS SAE 6000 PSI INFORMATION GENERAL. Type Approvals 17
GENERAL SAE 6000 PSI GS-FLANGE Product Page HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 Type Approvals 17 Retain Ring- and 37 Flare Flange
Argonne Engineering Professionals Seminar Series September 30, 2009 Argonne National Laboratory Argonne, IL
Argonne Engineering Professionals Seminar Series September 30, 2009 Argonne National Laboratory Argonne, IL Presentation of Case Study Manufacture of a Helium/Hydrogen Heat Exchanger to the ASME Code presented
The Standard Of Excellence
The Standard Of Excellence Contents: Rotational Molding Material Specifications Chemical Resistance Guide Special Applications Valves Flo-Concepts International Product Offering Tefzel Rotolined Stainless
The Standard Of Excellence
The Standard Of Excellence Contents: Rotational Molding Material Specifications Chemical Resistance Guide Special Applications Valves Flo-Concepts International Product Offering Tefzel Rotolined Stainless
ON-OFF free flow valves Series MVMFL/BW
Series MVMFL/BW Technical data Size () Rating Connections Plug characteristic Action Temperature 15-25 PN 16 Butt weld (BW) Parabolic linear Manual handwheel from -30 to +150 C Description Manual micro-valve
Thermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld
Thermowells Thermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld WIKA data sheet TW 95.10 Applications Petrochemical industry,
diaphragm valves Diaphragm Valves Index DV1 Series 1 2-way diaphragm valve DV3 Series 8 3-way diaphragm valves
Diaphragm Valves Index DV1 Series 1 2-way diaphragm valve DV3 Series 8 3-way diaphragm valves GO Regulator 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 574-5608
1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
Introduction. What is CPVC?
Introduction World Plastics is the leading company in the development and manufacture of advanced piping systems since 1984. Our uniquely wide-range of large and small bore piping systems are capable of
Consolidated* /2/3 Series (1) Electromatic* Ball Valve System
Technical Specifications Rev. C - 09/2018 Consolidated* 3500-1/2/3 Series (1) Electromatic* Ball Valve System Provides automatic or manual overpressure startup for steam boiler systems and assists startup
Datasheet Rev.1 Feb 2016 Orifice plate multi-holes
Datasheet Rev.1 Feb 2016 rifice plate multi-holes Suitable if little space available Accuracy, repeatability and reliability of the flow element Non-standardized flow element but designed and manufactured
PAGE International designs and manufactures custom engineered Fluoropolymer
PAGE International designs and manufactures custom engineered Fluoropolymer hose and tubing products for use in virtually any fluid transport application. From our modern production and testing facility
Thermometer in stainless steel with capillary for mounting in thermowell or for direct mounting
Ed.17.02 Design Type Case diameter in stainless steel for mounting in thermowell or for direct mounting F73 Dim 100 mm or 160 mm Accuracy Class 1,0% DIN EN 13190 Case Glass Stainless steel with bayonet
Stainless Steel Aeration Equipment Specification
Section 15 Stainless Steel Aeration Equipment Specification Part 1 - General 1.01 Description A. Scope of Work 1. Furnish, install and test aeration system including air mains, drop pipes, valves, expansion