Thermowells and Bosses
|
|
- Roxanne Holland
- 6 years ago
- Views:
Transcription
1 Thermowells and osses TW, TS, T, TJ and S Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr. 115, Offenbach am Main, Germany Tel.: ax: ITOK, Inc North Promenade lvd., Suite 750, Stafford, Texas 7777, US Tel.: ax: ITOK Incorporated 1-, lock, Zone, Yingtailong lndustrial Park, alang Street, Longhua istrict, Shenzhen, , hina Tel.: ax: ITOK Middle ast Oil quipment Trading LL 8-9, Makateb Tower, irport Road, P.O.ox 18512, eira, ubai, U Tel.: ax: info@fitokgroup.com K-I-GO-05-N
2 1 Thermowells and osses Thermowells and osses 2 Thermowells TW, TS, T and TJ Series TW series Straight eatures ITOK thermowells provide reliable heat-transmission performance under high temperature, high pressure, and corrosive conditions. Rugged mechanical construction ensures resistance to distortion under sharp temperature fluctuation conditions. Straight, stepped, and tapered shank designs are available. instrument connection is, other connections are available on request. Materials include 316 SS, 30 SS, 321 SS, 91, 92, 316H SS, carbon steel, brass, titanium, alloy -6 and alloy 00. Wrench llowance Thread llowance ore iameter Shank iameter Velocity Ratings lement Length When selecting a thermowell, take maximum fluid velocity rating into consideration to avoid failure due to resonance vibration, as well as connection type, insertion length, and bore diameter. Please refer to the table below for the maximum fluid velocities: Sizes Maximum luid Velocities (ft/sec) Shank Style Stepped Straight Root ia. in. 3/ 7/8 ny ny rass Material arbon Steel 30 SS, 316 SS Monel rass arbon Steel 30 SS, 316 SS Monel rass arbon Steel 30 SS, 316 SS Monel arbon Steel 30 SS, 316 SS Monel luid 59.3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / /21.0 Immersion Length 2.5".5" 7.5 " 10.5" 13.5 " 16.5" 19.5 " 22.5 " 23.9/ / / / / (10.5) (16.6) 1.0 (.0) (9.8)
3 3 Thermowells and osses Thermowells and osses Stepped Wrench llowance Thread llowance Shank iameter ore iameter Step Length (2.5" standard) Tip iameter (1/2 '' standard) Wrench llowance Thread llowance Root iameter lement Length ore iameter Tip iameter Sizes lement Length Sizes (16.0) (22.3) (16.0) 1.0 (.0) (16.0) (22.3) (9.8) (22.3) (9.8) 1.0 (.0)
4 5 Thermowells and osses Thermowells and osses 6 TS series Stepped Straight Head iameter 1.50" Length ore iameter Shank iameter Head iameter 1.50" Length Shank iameter ore iameter lement Length Step Length (2.5" standard) Tip iameter (1/2 '' standard) lement Length Sizes Sizes 1.0 (.0) (22.3) (33.5) 1.0 (.0) (22.3) (33.5)
5 7 Thermowells and osses Thermowells and osses 8 T series Straight 1.50" Length 2.0" Length Head iameter Root iameter ore iameter Tip iameter 5/8" 1.25 " standard ore iameter Shank iameter lement Length lange Size and acing as Required Sizes lement Length Sizes 1.0 (.0) 1.0 (.0) (33.5) 1 lange NSI lass (9.8) (22.3)
6 9 Thermowells and osses Thermowells and osses 10 Stepped 2.0" Length 2.0" Length 1.25 " standard Root iameter ore iameter Step Length (2.5" standard) Tip iameter 1/2'' 1.25 " standard Root iameter ore iameter Tip iameter 5/8" 1/2 NP T lange Size and acing as Required lange Size and acing as Required lement Length lement Length Sizes Sizes 1 lange NSI lass lange NSI lass (.0) 1 1/2 lange NSI lass /2 lange NSI lass 150
7 11 Thermowells and osses Thermowells and osses 12 TJ series leaning and Packaging Root iameter 8 ore iameter Special pplication NO 13 " " " N MR0175 S 13" 13.5 " 1 " " ".5.5 " " 5 5 " " " " 6 6 " " " " 7 7 " " " " 8 8 " " " " 9 9 " " " " ".5.5 " " " " " " " " " 12.5" ore iameter 0.26" 0.335" 0.385" 0.37" 0.515" 0.656" 9 Sizes 25 Normative NPS 11/2 lange NSI lass 300 NPS 2 lange NSI lass 300 1/2-1 NPT imension, mm ase on esign pplication Liquid flow rate is less than 8m/s; Gas flow rate is less than 0m/s Only apply to installation of pipeline Only apply to installation of equipment and vessel Only apply to installation of pipeline Only apply to installation of equipment and vessel Part Number escription SS - TW - NS8 - R ST S2 Shank iameter (ST&SP) and TS Series Root iameter Shank Style NSI lass Size Type Size Type Series Material 0.5" 8 8 1/2 NS Male NPT 8 1/2 150 lass 150 ST Straight 12 3/ 300 lass 300 Male SP RT SP Stepped lass 0 1 1/ 900 lass 900 TP R lange 2 1 1/ lass 1500 lat ace lass 2500 lange emale NPT NS SS 316 SS " 10 emale SPT RT 321 SS S " SS S " TW Thread Thermowells " Ring Type Joint lange lange Thermowells T 1.25" RJ 316H SS 6H Socket Weld Thermowells TS 1.5" 2 Wafer Type Joint lange LJ rass TJ Wafer langed Thermowells arbon Steel S Titanium TI lloy -6 H lloy 00/ R-05 M Note: "Part Number escription" is used for composition rules of ITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact ITOK group or authorized agent. 90L 90L SS
8 13 Thermowells and osses Thermowells and osses 1 osses S Series Part Number escription SS - S - NS S2 eatures Working pressure up to: 1500 psig (10 bar) Solid bar stock boss Variety of end connections Material Series Type Size ore iameter Wrench llowance Overall Length Special pplication leaning and Packaging imensions SS 316 SS S1 S 321 SS 30 SS 5 25 S NS MS RP emale NPT emale Metric thread emale SPP 8 1/2" mm or 16 mm or 1 " mm mm mm 9 mm 16 mm 17 mm mm mm mm 35 mm 0 mm 5 mm mm mm mm mm S NO N MR mm nd imensions (mm) H H asic Ordering Number Note: "Part Number escription" is used for composition rules of ITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact ITOK group or authorized agent. M12 x S-MS S-MS M16 x S-MS S-MS M x S-MS S-MS M33 x S-MS S-MS /2 emale SPP S-RP S-RP / emale SPP S-RP S-RP emale SPP S-RP S-RP M x (80) (10) -S-MS S-MS The boss with H in brackets shall be used for the thermometer with movable male thread (such as bimetal therm). 2. When the boss is used for bimetal therm, the sealing slot at 3 and shall not be processed. 3. The boss of M x 2 shall be used for T/ or RT when a=0, used for bimetal therm when a=.. The boss with H= or 10 shall be used for thermo-insulation objects. 5. imensions are for reference only and are subject to change. 6. Sizes and types listed are standard. Other sizes and types are available on request. 7. Materials same as TW series, add the material designator as a prefix to the basic ordering number to get the complete ordering number.
High Pressure Relief Valves
High Pressure Relief Valves HSR Series, 0,000 psi ( bar) Series, 0,000 psi ( bar) HAR Series, 0,000 psi ( bar) ITOK roup ITOK mbh (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, ermany Tel.:
More informationd n g a n a ck a tio cia lica Filters ctio 3 S ctio n n 3 T ctio 2 S ctio 2 T ctio 1 S d C ctio 1 T d C ria 904L rie e S Ordering Number Description
B-16 B-16 FT, FB, FI and FW B-163 Filtration Definitions Sintered element: metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact
More informationGrease Fittings and Bleed Fittings
Grease ittings and Bleed ittings VCG Series, VCG Series, PI Series, PI Series and BV Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger andstr. 5, 09 Offenbach am Main, Germany Tel.: +9 9 900 9 ax:
More informationTubing and Pipes.
Tubing and Pipes FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +49 9 900 449 Fax: +49 9 900 449 FITOK, Inc. 4 North Promenade Blvd., Suite 70, Stafford,
More informationISO 9001:2008 certified
c ISO 9001:2008 certified 3/14 www.setexproducts.com INTRODUCTION SETE Thermowells serve two primary functions: (1) extend temperature instrument life by protecting sensing elements from harsh process
More informationThermowells. Excellence the World can Measure TM. Temperature Products. Fabricated - Screwed & Flanged Connection. General Description.
Thermowells abricated - Screwed & langed onnection Temperature Products ata sheet : TWELL2/2012 y Wide Range of Materials - Stainless Steels - Exotic Materials y hoice of Process onnections - langed -
More informationFORGED FITTINGS, SOCKET-WELDING AND THREADED
SME 16.11-2011 FORE FITTINS, SOKET-WELIN N TREE 1 SOPE N ENERL 1.1 Scope This Standard covers ratings, dimensions, tolerances, marking, and material requirements for forged fittings, both socket-welding
More informationThermometer in stainless steel with vertical stem in stainless steel
Ed.18.01 Design Thermometer in stainless steel with in stainless steel 1.4571 Design EN 13190 Case diameter Dim 63, 100 eller 160 mm Accuracy Class 1,0% acc.to DIN EN 13190 Type Case Glass 5500 = case
More informationlength i.e. the length required to pass through walls, pipe fittings, etc. is taken into account when choosing the necessary insertion length.
www.tcproducts.com ---5 hermo-ouple Products o. hermo-ouple Products company offers thermowell assemblies in a wide variety of materials, lengths and diameters to meet your particular application conditions
More information6. SHEATH MATERIALS, THERMOWELLS, FITTINGS, AND TERMINATIONS
6.1 INTRODUCTION: 6. SHEATH MATERIALS, THERMOWELLS, FITTINGS, AND TERMINATIONS Temperature sensor element for laboratory and industrial use should normally be protected by some form of sheath or housing.
More informationModel 410 Threaded Straight Thermowell. Model 411 Threaded Tapered Thermowell. Model 412 Threaded Reduced Tip Thermowell 1.
Model 410 Threaded Straight Thermowell 1.75 + T 3/4 NT 0.75 0.75 1 NT 0.875 0.875 Model 411 Threaded Tapered Thermowell 1.75 + T 3/4 NT 0.875 0.625 1 NT 1.063 0.625 Model 412 Threaded Reduced Tip Thermowell
More informationTHERMOMETERS. STANDARD BIMETAL 90 back angle type available in 2, 3 and 5 dials
THERMOMETERS Thermometers are used to measure temperature. PIC stocks a variety of temperature measuring instruments, including bimetals, magnetic thermometers, tridicators and scale thermometers. STANDARD
More informationThermometer in stainless steel with adjustable stem in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell
type stainless steel Ed.17.01 Design Thermometer in stainless steel in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell Type Design EN 13190 Case diameter Dim
More informationThermometer in stainless steel with capillary for mounting in thermowell or for direct mounting
Ed.17.02 Design Type Case diameter in stainless steel for mounting in thermowell or for direct mounting F73 Dim 100 mm or 160 mm Accuracy Class 1,0% DIN EN 13190 Case Glass Stainless steel with bayonet
More informationACCESSORIES LS/520, LC/520 Heavy duty non-return valves 1/ LT1000 Block form flow regulators (uni-directional) 1/8 & 1/4
ESSORIES LT000 lock form flow regulators (uni-directional) /8 & /4 LT00 lock form flow regulators (bi-directional) /8 & /4 LT70 Quick exhaust valves /8 & /4 LS/50, L/50 Heavy duty non-return valves /4...
More informationThreaded and flanged. Threaded and flanged Socket weld-in
Technical Information TI138T/02/en Industrial protecting tubes omnigrad TA series Heavy, medium and light duty from round/hexagonal bar stock or pipe threaded, flanged and socket weldin versions Threaded
More informationTSW400 series Thermowells
Data sheet DS/TSW400 EN Rev. A TSW400 series Thermowells Safe, tough and reliable thermowells for the Oil & Gas industry Measurement made easy Engineered to international standards ISO19001:2000 Manufactured
More informationHeavy Duty Thermowell for the Oil & Gas Industry. Engineered solutions for optimized and dependable process measurements
Data sheet Heavy Duty hermowell for the Oil & Gas Industry Engineered solutions for optimized and dependable process measurements onstructed from durable, high-quality materials for use in heavy duty applications
More informationContact thermometer. Bimetal- or Gas actuated thermometer. Description. Features. Measuring ranges. Options. Applications
Force Pressure Temperature Switch Contact thermometer Bimetal- or Gas actuated thermometer - Inductive contacts - Sliding contacts - Snap action contact - Class 1 acc. to DIN EN 13190 - Optional with liquid
More informationThermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld
Thermowells Thermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld WIKA data sheet TW 95.10 Applications Petrochemical industry,
More informationR ED 7. Coulton Instrumentation THERMOWELLS. Data Sheet SYSTEM FEATURES SCOPE TESTING AND CERTIFICATION DESIGN MATERIALS DS0796-R7
Data Sheet Coulton Instrumentation SYSTEM FEATURES * Manufactured from selected materials * Special designs on application * Customised process connections * Low installed cost with assured quality SCOPE
More informationTHERMOWELL BASIC TRAINING
THERMOWELL BASIC TRAINING 1 PURPOSE OF TRAINING WHY CONSTRUCTION TESTING INSTALLATION HOW INSTALATION CONSEQUENCES OVERVIEW OF POSSIBLE MODELS Why to use thermowells? Protection of the temperature sensor
More informationMiniature Product with a Threaded Coupling
8 ed oupling Miniature Product with a ed oupling Space saving with scoop proof connector designed for any harsh application where both size and EMI shielding are critical. compact solution iameter up to
More informationBollard Chain Eye 3/8" (Powder Coated) Quick Link Connector 5/16" (Powder Coated) Optional Accessories:
ollard R-98- General escription: 0 / /8 R-98- Solar Light ollards feature bike-locking arms to to operate for days without direct sunlight. Lighting hardwiring or underground conduits. hoose from a range
More informationTubes and Pipes. Tubes and Pipes D-02
s and Pipes s and Pipes D-0 D-03 s and Pipes Contents s Tubing Selection Tubing Handling Gas Service Tubing Installation Suggested Allowable Working Pressure Tables Stainless Steel Seamless Tubing Carbon
More informationDP Series Low Pressure Pneumatic Diaphragm Valves 316L SS/ASTM A479. Machine finished. FC-01 Standard Cleaning and Packaging
iaphragm Valves iaphragm Valves V-0 P Series ow Pressure Pneumatic iaphragm Valves Features Minimum particle generation and dead space Fully contained seat to provide excellent resistance to swelling and
More informationThermowell, weld-in or with flange (solid-machined) Version per DIN form 4, 4F Models TW55-6, TW55-7
Thermowells Thermowell, weld-in or with flange (solid-machined) Version per DIN 43772 form 4, 4F Models TW55-6, TW55-7 WIKA data sheet TW 95.55 Applications Chemical industry, process technology, apparatus
More informationTYPE 670/676/680 LOW-TEMPERATURE METAL BELLOWS SEALS
Set screws Shaft packing ellows assembly D Insert/primary ring TYPE 670/676/680 LOW-TEMPERTURE METL ELLOWS SELS D D Type 680 Type 670/676 Sealol Welded Metal ellows Product Description Type 670: ll-alloy
More informationDiaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
More informationMaximum Inlet Pressure. 400 psig (27,6 bar), For higher inlet pressures, up to 1000 psig (69 bar), see Bulletin 71.2:99.
Introduction Maximum Inlet Pressure The Type 99 regulator typically provides fuel gas to boilers, furnaces, ovens, mixers, and large commercial or institutional installations. 400 psig (27,6 bar), or higher
More informationTNF CAPILLARY THERMOMETERS
TNF CAPILLARY THERMOMETERS Flow Pressure Level Temperature measurement monitoring control T2 Gas Filled Capillary Thermometer Dial Sizes: 2.5, 3, 4, 6 and 10 All Stainless Steel Construction Ranges: -40
More informationTHERMOWELL ASSEMBLIES & THERMOWELLS INDEX
THERMOWELL ASSEMBLIES & THERMOWELLS INDEX PAGE General Information & Part Numbering Examples... T2 RTD & T/C Style Thermowell Assemblies RTD'S for Thermowells (RT, RV, R4, RW, R1, R2, R5, or R8)... T3
More informationBDTW2X2 FLANGED PROCESS CONNECTION
Badotherm thermowell model TW2x2 is a bar stock type thermowell with a flanged process connection. The construction is available with straight, stepped, or tapered stem. The standard material is AISI 36(L)
More informationVESSEL & REACTOR VALVES. VR Series RISING DISC PROCESS VALVES. Sold by: G&W Industrial Sales
VR Series VESSEL & REACTOR VALVES RISING DISC PROCESS VALVES CRUST BREAKING BOTTOM OUTLET VALVES Rising Disc Valves M Seal for high Pressure & Temperature. Dual Seal, Soft Seal, M Ring and M Control are
More informationResistance Temperature Detectors
Resistance Temperature etectors INTROUTION For high-accuracy temperature measurements in a variety of industrial and commercial air and gas applications, urex Industries offers RT s of multiple elements
More information02V11/04. Thermostatic Control Valve. B Valve. Key benefits. Typical applications
02V11/04 Thermostatic ontrol Valve Valve Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications
More informationANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
More informationVESSEL & REACTOR VALVES. VD Series DISC VALVES PROCESS VALVES
VD Series VESSEL & REACTOR VALVES DISC VALVES PROCESS VALVES FULL FLOW BOTTOM OUTLET VALVES Tank Bottom Disc Valve M Ring for high temperature & vacuum. Other sealing systems are available Code: VD4R-VD6R
More informationD =3/4" D =7/8" D =1" D
Progressive eader Pins are case hardened and precision ground. nds are tapered to allow for a smooth transition during assembly and production. aterial: S 4320 Surface Hardness: 58-62 Rc Surface finish:
More informationANDERSON GREENWOOD H1 HAND VALVES
Large bore, ⅜ (9.5 mm) diameter orifice, general purpose soft-seated hand valve for pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION A general purpose, soft-seated hand valve designed for
More informationRefuse Systems & Hoggers
Refuse Systems & oggers Table of ontents Section escription Page oard Mills... 4 Sidewinder oggers oard Miils... 5 luminum oggers... 6-7 Step one oggers... 8 Straight Refuse ogger... 9 New eneration ogger...10
More informationFLOOR DRAINS AWI MANUFACTURING
STAINLESS STEEL FLOOR DRAINS AWI MANUFACTURING TABLE OF CONTENTS Floor Drains...3 Trench Drains...9 Slot Drains... 14 Cleanouts... 15 Floor Sinks... 15 P-Traps... 18 Laterals... 18 Hub Drains... 18 STAINLESS
More informationUnions, Swivels, Treating Irons & Circulating Heads HAMMER UNIONS
s, Swivels, Treating Irons & irculating Heads HER UNIONS General PRVEEN manufactures Haer s from raw materials in the form of forgings or castings in accordance with service requirements in sizes to "
More informationYARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
More informationFLOOR DRAINS AWI MANUFACTURING
STAINLESS STEEL FLOOR DRAINS AWI MANUFACTURING TABLE OF CONTENTS Floor Drains...3 Trench Drains...9 Slot Drains... 14 Cleanouts... 15 Floor Sinks... 15 P-Traps... 18 Laterals... 18 Hub Drains... 18 STAINLESS
More informationprecision pipe fittings
Precision Pipe Fittings 8 to sizes 36 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 (864) 574-7966 www.hoke.com Sales-hoke@circor.com Index Safety
More informationprecision pipe fittings
Precision Pipe Fittings HOKE Incorporated 405 Centura Court PO Box 4866 (29305) Spartanburg, SC 29303 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com sales@hoke.com Index CNP Close Nipple 4 NP Hex
More informationSolution Partner. Leak - Proof Flow & Control. Needle Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak Proof low & Control The Best Partner for Value Creation olution Partner Index Needle Valves NV ERIE NV50 eries 4~7 BNV60 eries
More informationTABLE OF CONTENTS DOC # MA REV 3, 12-99
TABLE OF CONTENTS General Information... 2 Sales Policy... 3 Product Engineering Specifications - Drilled Barstock Overall Lengths: 31.25 through 61.25... 5 Overall Lengths:
More informationSpecialty Chain. Red Meat Processing Chain (see page 2) Asphalt Plant Processing Chain (see page 4-5) Mining Processing Chain (see page 6-7)
Specialty hain Red eat Processing hain (see page 2) S-3 with -2 attachment every pitch. S-6272 with -2 attachment every pitch. Asphalt Plant Processing hain (see page 4-5) 3945 with -2 attachment every
More informationMission Statement. Our Policies
he company was founded by management with over 50 years experience in the Power ransmission Industry for ngineering and onveyor hain. o compete in today s marketplace, we offer products from the best and
More informationThermowells and Assemblies
and Assemblies HA136712 Page 5-1 and Assemblies Introduction provide protection for thermocouples in pressure vessels and pipelines. A thermowell permits checking and replacing the thermocouple without
More informationPENBERTHY SERIES 300 AND 400 OFFSET PATTERN FLAT GLASS GAGECOCKS
Offset pattern gagecocks that provide a 90 connection to the process vessel and isolate the gage chamber from the liquid content of the vessel FEATURES Offset pattern allows easy cleaning. Integral bonnet
More informationMETAL SEATED BUTTERFLY VALVES
QF Series QUARTER TURN VALVES METAL SEATED BUTTERFLY VALVES PROCESS VALVES HIGH PERFORMANCE BUTTERFLY VALVES Triple Eccentric Butterfly Valve Code: QFTM Fire safe tested API 6FA Jacket connections (oil
More informationNC9 Series Medium-Duty Pre-Lubricated Pneumatic Cylinders
P- Medium-Duty Pre-Lubricated od Lock ontents Specifications... ord Order ode... Mounting Dimensions...- Spherical earing Mount...0- ylinder ccessories... Double od Models... lignment oupler... ccessories...
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, s and Tubing Guide Fittings, s and Tubing Guide Instrumentation Products Single/Double Ferrule Instrument CPI / A-LOK Tube Fittings Introduction Parker CPI / A-LOK Instrumentation Tube Fittings
More informationAVK 26 AVK UK Water Mains to Meter Offer & Price List 2017
AVK 26 AVK UK Water Mains to Meter Offer & Price List 2017 Technical introduction AVK is a new patented range of composite push fittings combining the safety and strength of a traditional mechanical fitting
More informationPart Numbering System ROD ENDS. From Catalog Page. Inch Sizes M Metric Sizes R Special
INC Part Numbering System R NS R rom Catalog Page URICTR lank No ubricator ptional ubricator R TYP Right-and eft-and RING C See Catalog Page Inch s etric s R Special STY C P Precision 4-Piece etal-to-etal
More informationThermowell Data This Section Contains
Industrial Process and Sensor 2109 Holland Street Alton, Illinois 62002 Phone 618-465-7623 FAX 618-465-7623 WE CAN TAKE THE HEAT! Thermowell Data This Section Contains General Reference Data Please For
More informationBLS 100 Orifice Plate DIN 19206
E91-1 2012 1 B 100 Orifice Plate IN 19206 Application Flow rate measurement of aggressive an nonaggressive meia particularly for large pipelines. Orifice plate with wele-on hanle/spae for irect installation
More informationCombiTemp TCR6 Standard RTD temperature sensor
CombiTemp TCR6 Main features Sensor and connection in stainless steel, ISI 316 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating
More informationIndustrial Process Thermocouples
s ASE ETAL PROTECTION TUE ASSELY The TPT Style assemblies feature a base metal thermocouple and metal protection tube for use in corrosive or hostile environments. Optional mounting bushings and flanges
More informationMineral Insulated Stainless Steel & Alloy Sheathed Thermocouples & Transducer Cables & Probes
Mineral Insulated Stainless Steel & Alloy ed Thermocouples & Transducer Cables & Probes (Edition August 2017) MICC Ltd Temperature House, 21 Sedling Road Wear Industrial Estate, Washington Tyne and Wear.
More informationPAGE International designs and manufactures custom engineered Fluoropolymer
PAGE International designs and manufactures custom engineered Fluoropolymer hose and tubing products for use in virtually any fluid transport application. From our modern production and testing facility
More informationData Sheet 102/103, 202/203, 302/303 Flanged Diaphragm Seal
FETURES thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal ontinuous duty design prevents loss of process fluid if pressure instrument is removed or fails
More informationFlanged chemical seals series D
Flanged chemical seals series D80-8-85 hemical seals with built-in flange Flange facing and diaphragm of the same material (D8, D85) Fluid temperature from -60 to +00 D80 DN 5 mm D80 DN > 5 mm Designed
More informationDrain Taps, Gland Cocks, De-Aerators and Air Vents
SETION 11a Drain Taps, Gland ocks, De-erators and ir Vents Tel: + ()195 71 Fax: + ()195 71 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents Drain Taps, Gland ocks, De-erators
More informationTechnical information
Extract from catalogue N 0 Technical rmation Standards Materials Design / construction ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F
More informationEXPLANATION OF SPECIFICATIONS
EXPLNTION OF SPEIFITIONS Part Number: Extended Length*: ollapsed Length: Stroke: Mounting odes: The catalog number for the individual shock absorber. The length of the shock absorber when it is fully extended.
More informationMaterials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
More informationPARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
More informationD-060 PN 16 D-060-C PN 16 D-062 PN 25 D-065 PN 40. A.R.I. FLOW CONTROL ACCESSORIES Ltd. Combination Air Valve for High Flow. Description.
D-00 PN Water Supply D-00- PN D-0 PN D-0 PN 0 ombination ir Valve for High Flow us-d00wtr- Description The D-00 series ombination ir Valve has the features of both an air release valve and an air & vacuum
More informationExternal Cage Displacer Actuated Liquid Level Switches
xternal age Displacer ctuated Liquid Level Switches D S R I P T I O N High Pressure Liquid Level Switches are displacer actuated units, utilizing a single switch mechanism for level alarm or control functions.
More informationº to 150º F In accordance with this specification and
SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of
More informationINDUSTRIAL THERMOMETERS
JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products
More informationDH Series High Pressure Springless Diaphragm Valves. Special Cleaning and Packaging 316L SS/ASTM A479. Machine finished
V-9 iaphragm Valves iaphragm Valves s Valves & Regulators H Series High Pressure Springless iaphragm Valves Features Metal-to-metal diaphragm seal Elgiloy diaphragm to provide high strength and corrosion
More informationMETAL & DUAL SEATED PISTON VALVES
VP Series VESSEL & REACTOR VALVES METAL & DUAL SEATED PISTON VALVES PROCESS VALVES HIGH PERFORMANCE PISTON VALVES Dual Seal Piston Valve Code: VP4D-VP6D High sealing performance of Dual Seal specially
More informationLarge selection of standard versions. Special versions at customer request. Nominal sizes: 100, 125 and 150 mm
Bi-metal Thermometers all Stainless Steel Construction measuring monitoring analysing TBE Fast response times Large selection of standard versions Special versions at customer request Nominal sizes: 100,
More informationAccessories. Accessories. Parker Autoclave Engineers offers a complete selection of accessories to complete your system requirements.
Accessories Parker Autoclave Engineers offers a complete selection of accessories to complete your system requirements. Components such as thermocouples and thermowells are used for monitoring and controlling
More informationEQT MIDSTREAM DESIGN AND CONSTRUCTION MANUAL DESIGN STANDARD WELDING AND JOINING 3.4 HOT TAP AND BRANCH CONNECTIONS Total Pages: 13
Table of Contents Scope... 845 References... 845 Governmental... 845 EQT Midstream Publications... 845 Industry Standards... 846 Computer Programs... 846 1 Manufactured Branch Connections... 846 1.1 Extruded
More informationTDC46M Carbon Steel Thermodynamic Steam Trap with Maintainable Seat
2 3 4 7 6 5 8 9 1 Optional extra V1 integral blowdown valve See spare parts for details on how to order; Alternatively please specify at the time of order placement. escription The TC46M is a carbon steel,
More informationNC9 Series Medium-Duty Pre-Lubricated Pneumatic Cylinders
P- N Series Medium-Duty Pre-Lubricated od Lock N ontents Specifications... ord Order ode... Mounting Dimensions...- Spherical earing Mount...0- ylinder ccessories... Double od Models... lignment oupler...
More informationTNF CAPILLARY THERMOMETERS
TNF CAPILLARY THERMOMETERS Flow Pressure Level Temperature measurement monitoring control T2 Gas Filled Capillary Thermometer Dial Sizes: 2.5, 3, 4, 6 and 10 All Stainless Steel Construction Ranges: -40
More informationElectrodes Electrodes 1004 Stainless steel and Brass electrode 105 Stainless steel/brass 106 High pressure electrodes 107
le o co te ts de le o co te ts escr t o d ct o ert c tes ro ls 104 Electrodes 1004 Stainless steel and Brass electrode 105 Stainless steel/brass 106 High pressure electrodes 107 e e str ct o s or str e
More informationTemperature Sensing Standard Thermowells for Industrial Applications. Velocity Ratings of Wells. View Product
Standard for Industrial Applications Well failures, in most cases, are not due to the effects of pressure and temperature. The calculations necessary to provide adequate strength under given conditions
More informationThermowells General Specifications
Thermowells General Specifications Material - The Longevity Factor In general, the thermowell material chosen for the installation is governed mainly by the corrosion conditions the well will face. Recommended
More informationCatalog 2009 TUFFALOY. Resistance Welding Products. Leader in the Industry Since 1937
Catalog 2009 Resistance Welding Products Leader in the Industry Since 1937 table of contents ELECTRONICS STANDARD ELECTRODES RESISTANCE WELDING PRODUCTS The little man is now seventy years old. It was
More informationSuitable for use in a variety of fluid systems.
Suitable for use in a variety of fluid systems. General Description Pipeline Wye Strainers are in thousands of applications in chemical, petroleum, pulp and paper, and utilities, as well as numerous commercial
More informationThermocouple temperature sensor omnigrad T -TSC 310
Technical information TI 255T/02/en 60019734 Thermocouple temperature sensor omnigrad T -TSC 310 Probe in direct contact with the process Insulation in mineral oxide Extension cable in glass fibre TSC
More informationSERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY
SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY Flow capacity* 200 sccm to 500 slpm (0.007 to 17.6 scfm) Vacuum to 2,300 psig (158 bar) inlet, 100 psig (7 bar) outlet
More informationDimensions Mechanical and Performance Requirements. Round Spacers Hex Spacers Round Threaded Female Standoffs...
Spacers & Standoffs imensions Mechanical and Performance Requirements Round Spacers... 295 Hex Spacers... 296 Round hreaded emale Standoffs... 297 Hex hreaded emale Standoffs... 298 Hex & Round hreaded
More informationYARWAY WYE-TYPE PIPELINE STRAINERS 900 SERIES
Protecting pipeline components from damaging particles with minimal pressure drop FEATURES Body material - ASTM and/or ASME as permitted under boiler code and power piping code. Provides assurance of quality
More informationRegulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
More informationØ mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGY OF SUCCESS Contents 3 System KAN-therm PP The material... 94 Sanitary systems installation... 95 Pipes... 95 Thermal elongation...
More informationINDUSTRIAL THERMOMETERS
SIKA thermometers for industrial and marine applications Special versions and accessories SIKA thermometers for HVAC applications INDUSTRIAL THERMOMETERS SIKA-FLOYD_V_thermometer 09/08 The Original - Made
More informationBULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
More information1604/2609/3609 TYPE 1604/2609/3609. First Edition API 682 Type C Sealol Metal Bellows Seals. Product Description. Performance Capabilities
A Inner Bellows Assembly B Insert C Inner Mating Ring D Packing E low Guide Inner Gland G Spiral Wound Gasket H Pumping Ring I Outer Bellows Assembly J Packing ollower K Sleeve L Outer Gland M Outer Mating
More informationFlowline Products and Services
Flowline Products and Services FM Technologies is the world s leading supplier of flowline products and services to the oilfield industry and is the standard against which all others are measured. From
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationFS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent
More information