High Pressure Relief Valves
|
|
- Merry Carr
- 6 years ago
- Views:
Transcription
1 High Pressure Relief Valves HSR Series, 0,000 psi ( bar) Series, 0,000 psi ( bar) HAR Series, 0,000 psi ( bar) ITOK roup ITOK mbh (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, ermany Tel.: + 00 ax: + 00 ITOK, Inc. North Promenade Blvd., Suite 0, Stafford, Texas, USA Tel.: + 00 ax: + 0 ITOK Incorporated -, Block C, Zone E, Yingtailong lndustrial Park, Dalang Street, Longhua District, Shenzhen, 0, China Tel.: ax: + 0 ITOK Middle East Oil Equipment Trading LLC 0-0, Makateb Tower, Airport Road, P.O.Box, Deira, Dubai, UAE Tel.: + ax: + info@fitokgroup.com K-IC-HV-0-EN-0
2 High Pressure Relief Valves Contents HSR Series 0,000 psig ( bar) Series 0,000 psig ( bar) HAR Series 0,000 psig ( bar) Part Description HSR Series 0,000 psig ( bar) eatures Soft seat relief valves. Set pressure: 00 to 0,000 psig ( 0 to bar). Working temperature: to 00 (0 C to 0 C). Liquid or gas service. Provide bubble tight shut-off of gas. Pressure settings are made at the factory and valves are tagged accordingly. State the required set pressure with the order please. Lock wired secure cap to maintain set pressure. Easily exchangeable seat. ree assembly positions. Technical Data 0 Tube OD in. Inlet Orifice Size Cv Pressure Rating psig (bar)@00 ( C) Minimum Back Pressure HSRSS-- - / 0. (.). 00 (0) 000 () HSRSS-- - / 0. (.) () 0,000 (0) HSRSS-- - / 0. (.) 0. 0,000 (0) 0,000 () system operating pressure should not exceed 0% of relief valve set pressure.
3 High Pressure Relief Valves High Pressure Relief Valves Standard Materials of Construction Dimensions 0 A E D B C Item Component Cap Adjusting Bolt Valve Material Relief Valves Dimensions A B C D E Spring Cylinder asket L SS/A. (0.).00 (0.). (0.). (.). (.). (.) 0. (.) Spring Washer Spring Spindle -PH/AMS SS/A. is the dimension of Mounting Holes.. All dimensions are for reference only and are subject to change. or dimensions not shown above, please contact the authorized representative or ITOK roup. 0 Plug Plug uide Seat Valve Body Seat land Lubricant Molybdenum Disulfide
4 High Pressure Relief Valves High Pressure Relief Valves Series 0,000 psig ( bar) eatures Metal seat relief valves. Set pressure: 000 to 0,000 psig (0 to bar). Working temperature: -0 to 00 (- C to 0 C). Liquid or gas service. Provide shut-off of liquids and gases under pressure to commercial tightness standards. Pressure settings are made at the factory and valves are tagged accordingly. State the required set pressure with the order please. Lock wired secure cap to maintain set pressure. Easily exchangeable seat. ree assembly positions. Standard Materials of Construction 0 Technical Data Tube OD in. Inlet Orifice Size Cv Pressure Rating psig ( C) Minimum Back Pressure SS-- - / 0. (.). 000 (0) 000 () SS-- - / 0.0 (.) () 0,000 (0) SS-- - SS-- - / / 0. (.) 0. (.) ,000 (0),000 (0),000 (0) 0,000 () Item Component Cap Valve Material SS-H- - / H 0. (.) 0. 0,000 () 0,000 (0) Adjusting Bolt SS-H- - / H 0.0 (.) 0.,000 (),000 (0) Spring Cylinder asket L SS/A SS-H- - / H 0.0 (.) 0.0 0,000 (0) 0,000 () Spring Washer Spring -PH/AMS system operating pressure should not exceed 0% of relief valve set pressure. Spindle SS/A 0 Plug S00/A Plug uide Seat -PH/A Valve Body Seat land Lubricant Molybdenum Disulfide
5 High Pressure Relief Valves High Pressure Relief Valves Dimensions HAR Series 0,000 psig ( bar) eatures ield adjustable and soft seat relief valves. Set pressure: 000 to 0,000 psig (0 to bar). Working temperature: to 00 (0 C to 0 C). Liquid or gas service. Provide bubble tight shut-off of gas. Easily exchangeable seat. ree assembly positions. A Technical Data E D Tube OD in. Inlet Orifice Size Cv Pressure Rating psig ( C) Minimum Back Pressure HARSS-- - / 0. (.0) ( 0) 0,000 (0) 00 (.) HARSS-- - / 0.0 (.) 0. 0,000 ( 0) 0,000 ( ) B C system operating pressure should not exceed 0% of relief valve set pressure. Relief Valves Dimensions A B C D E. (0.).00 (0.). (0.). (.). (.). (.) 0. (.). is the dimension of Mounting Holes.. All dimensions are for reference only and are subject to change. or dimensions not shown above, please contact the authorized representative or ITOK roup.
6 High Pressure Relief Valves High Pressure Relief Valves Standard Materials of Construction Dimensions Item Component Valve Material Handle 0/B Set Screw SS/A SS/A Bonnet SS/A Upper Stem SS/A Spring -PH/AMS SS/A Packing land C000/B0 0 Washer Backing Ring Backing Ring O-ring Ring Lower Stem Plug Body Seat C000/B0 PTE luorocarbon KM SS/A SS/A SS/A 0 H E D C B A Lubricant Molybdenum Disulfide A B C D E H HARSS-H (.). (. ). (.0). (. ). (. ).00 ( 0. ). ( 0. ) 0. (. ) HARSS-H (.). (. ). (.0). (. ). (. ).00 ( 0. ). ( 0. ) 0. (. ). H is the dimension of mounting Holes.. All dimensions are reference only and are subject to change. or dimensions not shown above, please contact the authorized representative or ITOK roup.
7 0 High Pressure Relief Valves Part Description SS - H - - Series Body Material Inlet Tube OD rade HSR HAR SS SS H /"( Only) / " NPT /" (emale) 00~000 psig (0~ bar) 000~000 psig (0~ bar) 000~0000 psig (0~0 bar) 000~0000 psig (~0 bar) 0000~0000 psig (0~ bar) 0000~000 psig (0~0 bar) 0000~0000 psig (0~ bar) 000~0000 psig (0~ bar) 0000~0000 psig (~0 bar) 000~000 psig (~0 bar) 0000~0000 psig (0~ bar) HSR HAR HSR, HAR HSR Note:. Pressure settings are made at the factory and valves are tagged accordingly. State the required set pressure with the order please.. "Part Description" is used for composition rules of ITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact ITOK group or authorized agent.
Grease Fittings and Bleed Fittings
Grease ittings and Bleed ittings VCG Series, VCG Series, PI Series, PI Series and BV Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger andstr. 5, 09 Offenbach am Main, Germany Tel.: +9 9 900 9 ax:
More informationd n g a n a ck a tio cia lica Filters ctio 3 S ctio n n 3 T ctio 2 S ctio 2 T ctio 1 S d C ctio 1 T d C ria 904L rie e S Ordering Number Description
B-16 B-16 FT, FB, FI and FW B-163 Filtration Definitions Sintered element: metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact
More informationTubing and Pipes.
Tubing and Pipes FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +49 9 900 449 Fax: +49 9 900 449 FITOK, Inc. 4 North Promenade Blvd., Suite 70, Stafford,
More informationThermowells and Bosses
Thermowells and osses TW, TS, T, TJ and S Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany Tel.: +9 69 8900 98 ax: +9 69 8900 95 ITOK, Inc. 1383 North
More information289 Series Spring-Loaded Relief Valves
February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The
More information289 Series Spring-Loaded Relief Valves
89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction
More information1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
More informationP600 Pressure Regulator
P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with
More informationAnderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
More informationANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
More informationPressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve
Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................
More informationANDERSON GREENWOOD H1 HAND VALVES
Large bore, ⅜ (9.5 mm) diameter orifice, general purpose soft-seated hand valve for pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION A general purpose, soft-seated hand valve designed for
More informationCROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
More informationP133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator used in commercial and industrial applications
More informationP133 Pressure Regulator
P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial
More informationMaterials Materials Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown.
19000 Materials Materials 15 6 9 10 14 7 8 5 7 3 2 4 1 19000-2 Threaded End Connection Extension, flange and nipples for flanged and socket-weld connections are not shown. 19000.5 19000 (SRV-1/Q3.01) 19000
More informationSolution Partner. Leak - Proof Flow & Control. Needle Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak Proof low & Control The Best Partner for Value Creation olution Partner Index Needle Valves NV ERIE NV50 eries 4~7 BNV60 eries
More information1982 Series. Consolidated * Valves. Safety Relief Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular
More information289 Series Spring-Loaded Relief Valves
8/9 289 Series Spring-Loaded Relief Valves W187-2 W187-2 W21-1 W29-2 1-INCH TYPE 289H AND 289HH 2-INCH TYPE 289H Figure 1. Type 289H and 289HH Relief Valves The 289 Series relief valve is a throttling
More informationSpare Parts. Unique Single Seat Valve - standard ESE00199-EN Original manual
Spare Parts Unique Single Seat Valve - standard ESE00199-EN7 2014-10 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without prior
More information1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
More informationSanitary Pressure Regulators RHPS Series
www.swagelok.com Sanitary Pressure Regulators RHPS Series Pressure-reducing regulators and tank blanketing regulators 316L stainless steel construction 1/2, 1, and 1 1/2 in. end connections Working pressures
More informationBaumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
More informationSEMPELL. High Pressure Steam Bypass Valves - Type 115 ASME.
SEMPELL Steam Turbine and Boiler protection at Steam Turbine trip. Steam Turbine bypass to Cold Reheat or Condenser while Boiler/Turbine start-up and shut-down. Features and Benefits Pressure reduction
More informationCryogenic Bulk Tank and Transportation Brochure
Cryogenic Bulk Tank and Transportation Brochure Foreword This catalog briefly describes the Rego Industrial Gas and Cryogenic Equipment available from the Cryo-Flow division of RegO As a result of condensing
More informationEquipment Catalog. For inquiries and orders, please contact:
Equipment Catalog 1 2 Table of contents...pages Force Flow 100 Lube Pump... 4 Bucket Pumps... 5 Packing Injection Fitting Body Vent (Bleeder) Fittings... 6 1200 & 1500 Lube Pumps... 7 Hose Assemblies Gages
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationdiaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure
More informationSAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200
SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on
More informationTable of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities
Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1
More informationSpecification Data CM /10. Putting You In Control Series V-Max. High Capacity V-Ported Control Ball Valve
Putting You In Control Specification Data CM36005 09/10 36005 Series V-Max High Capacity V-Ported Control Ball Valve Dresser Masoneilan 36005 Series V-Max High Capacity V-Ported Control Ball Valve 2 Dresser
More information133 Series Self-Operated Regulators
133 Series Self-Operated Regulators z Wide Pressure Range Capability with Single Regulator Type 133H may also use Type 133L springs, allowing pressure settings to be varied between 2-inches wc and 10 psig
More informationRegulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
More informationMaximum Inlet Pressure. 400 psig (27,6 bar), For higher inlet pressures, up to 1000 psig (69 bar), see Bulletin 71.2:99.
Introduction Maximum Inlet Pressure The Type 99 regulator typically provides fuel gas to boilers, furnaces, ovens, mixers, and large commercial or institutional installations. 400 psig (27,6 bar), or higher
More informationCryogenic Service Valves
Cryogenic Service Valves Superlok cryogenic valves are used in many industries in a broad range gas service such as oxygen, nitrogen, argon and more. The valves incorporate specialized materials that maintain
More informationP630 HIGH FLOW GAS REGULATOR
P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a
More information13 Lock tab washer 304 SS 14 Lever and grip Stl-zinc plt-w/vinyl PRODUCT NUMBER
83R-240 SERIES Carbon Steel 3-Piece Full Port Socket Weld Ball Valve With Actuator Ready ISO Mounting Pad 1.5 & 2 Socket Weld, 800 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to
More information3 Piece Ball Valve Line
3 Piece Ball Valve Line This image cannot currently be displayed. 3 Piece Ball Valve Features Tight Shut-off, ANSI/FCI CL VI Variety of end connections Swing Out for servicing Fire Tested API 607 available
More informationType 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationAvailable End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
More informationCash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control
Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety
More informationBaumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumann 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves can be utilized for the control of are available
More informationTable of Contents Model Numbering System Ratings/Connections General Data
Specification Data CH3000 5/97 Control Valves A Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with VRT Anti-Cavitation and Noise Control Lo-dB Trim Table of Contents Model Numbering
More information1511 Series. Consolidated * Valves. Safety Valve
GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well
More informationSERVING THE NEEDS OF THE HVAC / PLUMBING INDUSTRY
NRS Gate Valve Size DN50-DN300 Conforms to EN1171-2002, BS3464, Bronze Seat Option of Extension Spindle, Gear Box, Valve Box NRS Gate Valve OS&Y Gate Valve Check Valve Lever Type Size DN50-DN600 Conforms
More informationNAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and
More informationWee Willie Model5061 Control Valve
Wee Willie Model5061 Control Valve For low flow, high pressure applications Specification Data CH7500E Rev. A 4/84 Masoneilan Table of Contents General Data.... Flow Coefficients (rated C).... Critical
More informationEngineering a reliable and safe industrial refrigeration plant for tomorrow
STC Shut-off valves for India Engineering a reliable and safe industrial refrigeration plant for tomorrow Shut-off valves ensuring optimum performance. Manufactured in India. Optimized design New packing
More informationDival 500. Pressure Regulators. Phone: Fax:
Pressure Regulators www.mvandc.com Pressure Regulators The DIVAL 500 series of spring loaded, diaphragm controlled, balanced valve design regulators are suitable for low, medium and high outlet pressure.
More informationProcess Interface Valves
www.swagelok.com Process Interface s Kenmac Series Process Interface s and Process Monoflanges Stainless steel, carbon steel, and duplex stainless steel materials Pressure ratings in accordance with ASME
More informationHIGH SEAL ULF Live Loaded Packing System
Instruction Manual HIGH-SEAL Live-Loaded Packing HIGH SEAL ULF Live Loaded Packing System Contents Introduction... 1 Scope of Manual... 1 Description... 2 Spring Selection... 3 Installation... 3 Parts
More informationBSA3HP Bellows Sealed High Pressure Stop Valve
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationA complete LNG FUEling system
A complete LNG FUEling system from the LNG Station Breakaway Coupling CryoMac LNG Fueling Nozzle Cryogenic Hose Quick Disconnect Vent Couplers LNG Tank Receptacle and Fueling Cap to the LNG vehicle Macro
More informationPressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
More informationPressure Regulators K Series
www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators, K Series 2 Swagelok K Series Pressure Regulator
More informationBLASTMASTER 125P REMOTE CONTROL SYSTEM
BLASTMASTER 15P REMOTE CONTROL SYSTEM PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to
More informationLIQUEFIED GAS SOLUTION
LIQUEFIED GAS SOLUTION TABLE OF CONTENTS LNG CRYOGENIC LINE VALVE F90 P.00 LNG CRYOGENIC BUILD UP F90 P.00 LNG CRYOGENIC ECONOMIZER F90 P.00 LNG CRYOGENIC PRESSURE RELIEF VALVE F90 P.00 LNG CRYOGENIC
More informationYARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
More informationSevere-Service Union-Bonnet Needle Valves Special Alloy Materials
www.swagelok.com Severe-Service Union-Bonnet Needle Valves Special Alloy Materials N Series and HN Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with
More informationdiaphragm valves Diaphragm Valves
Diaphragm Valves Index Safety Warning Inside Front Cover 2-way Diaphragm Valves Pneumatic Actuated Valves 4 DV Series- How to Order Matrix 7 Disclaimers Inside Back Cover GO Regulator PO Box 4866 Spartanburg,
More informationPRESSURE RELIEF VALVE RAPID SHIPMENT PROGRAM RAPID SHIPMENT PRESSURE RELIEF VALVES
PRESSURE RELIEF VALVE RAPID SHIPMENT PROGRAM RAPID SHIPMENT PRESSURE RELIEF VALVES PRONTO RAPID SAFETY RELIEF VALVE ASSEMBLY AND DELIVERY PROGRAM Pronto is a unique initiative that gives you access to
More informationEccentric style, round ported plug valves F580 - valve sizes DN F583 - valve sizes DN
Eccentric style, round ported plug valves F80 - valve sizes DN 80-0 F83 - valve sizes DN 10-600 Features The resilient plug provides tight shut-off without sealing lubricants. The plug valve utilizes a
More information88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1
CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM A108 Type 1215 3 Ball ASTM A108 Type 1215 8 Stem Nut 300 Series Stainless Steel
More informationPre s sure Re gulators
www.swagelok.com Pre s sure Re gulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators Swagelok Pressure Regulator Features Stem Fine-pitch
More informationA measured step forward
A measured step forward TM 1730 Series Parts List Contents Code Number Configuration - Model 1730... 2 General Parts...3 Manual Stroke Length Assembly... 7 Speed Reducer...9 Plunger Assembly - Standard...
More informationFully Lined High Performance Plug Valves Engineered for Industries Most Hazardous & Corrosive Services
ASSOCIATE CHLORINE INSTITUTE MEMBERS Fully Lined High Performance Plug Valves Engineered for Industries Most Hazardous & Corrosive Services LPG Valve Standard Features Optional Features Application Conforming
More informationPressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models
www.swagelok.com Pressure Regulators Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models Pressure Regulators 2 Swagelok Pressure Regulator Features Stem Fine-pitch
More information88L-240 Series. Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
88L-240 Series Low Temperature Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - Refer to page D-A MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 8. Stem Nut 300 Series Stainless
More informationGas Pressure Regulator HON 330
Gas Pressure Regulator HON 330 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS Serving the Gas Industry Worldwide 330.20 EDITION 01/2017 330.20 p. 2 330.20 p. 23 Compensating diaphragm (118,168, 243,
More informationLUNKENHEIMER FIGURE K4050 INLINE Y-BODY DN ASME CLASS 150
DN 50-500 ASME CLASS 150 The K4050 inline Y-body isolation valve is specially designed for severe service in alumina and mining applications where scale and erosion are present. FEATURES GENERAL APPLICATION
More informationLNG-501 Catalog LNG. Vehicle Tank Products
LNG-501 Catalog LNG Vehicle Tank Products TM Foreword This catalog briefly describes the RegO LNG Equipment available from RegO as a result of condensing information in this catalog, some highly technical
More information88A-200 Series. Carbon Steel ASME Class 150 Flanged Full Port Ball Valve -
88A-200 Series Carbon Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 8.
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More informationModulating liquid level regulators direct operated, for low pressure side types SV 4, 5 and 6 REFRIGERATION AND AIR CONDITIONING.
Modulating liquid level regulators direct operated, for low pressure side types SV 4, 5 and 6 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More informationFOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST
88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2 THRU 1 FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD LIST PART (1/2 & 3/4 VALVES) 2 Retainer ASTM
More information88A-900 Series. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 STANDARDS COMPLIANCE
88A-900 Series Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108
More informationNAVSEA STANDARD ITEM. 2.1 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods
NAVSEA STANDARD ITEM ITEM NO: 009-55 DATE: 30 JUL 2010 CATEGORY: II 1. SCOPE: 1.1 Title: Regulating/Reducing Valve; repair 2. REFERENCES: 2.1 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing
More informationCRYOGENIC. B a l l V a l v e s
CRYOGENIC B a l l V a l v e s Company Profile Leading manufacturer of high-end ball valves and pneumatic actuators Over 60 years experience with industrial applications We develop, manufacture and market
More informationMDV SERIES 3 WAY BALL VALVES
MDV SERIES 3 WAY BALL VALVES Diverting ball valves for industrial and process applications. Design Pressure Rating 150# to 1500# Available in Sizes ½ to 12 2500# Available in Sizes ½ to 4 Valve Size 1/2
More informationANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64
ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe
More informationFLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationPBV Ball Valves. Severe Service Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
PBV Ball Valves Severe Service Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 56-59-400 WWW.DKAMANS.COM Manufacturer of Quality Valve Products Around the Globe At Forum Energy Technologies
More informationAUTOMATIC AIR VALVES For potable water
AUTOMATIC AIR VALVES For potable water Page N Air release valve Page N Air release valve avent Page N Air release valve DN 0 / DN 0, DN 150 / DN 00 Page N /1 Page N5 Combined air release valve Page N 5/1
More information88A-900 SERIES. Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1
88A-900 SERIES Carbon Steel ASME Class 300 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4 VALVES)
More informationSeries Regulators - Pressure Reducing
26-1200 Series Regulators - Pressure Reducing D26120540X012 Specifications For other materials or modifications, please consult TESCOM. 3600 and psig 248 and 414 bar Outlet Pressure To maximum inlet Design
More informationUFR+L FILTER REGULATOR + LUBRICATOR
FEATURES The UFR+L filter regulator + lubricator is intended for the treatment of compressed air or compressed gas. Its function is that of supplying filtered, lubricated air at the desired pressure for
More informationSection 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
More informationFLANGED RAILROAD BALL VALVES 7RRR, 7RRT & 7RRU STANDARD BORE: 1" 3" SERIES 7000 (AAR NO. E089012)
FLANGED RAILROAD BALL VALVES 7RRR, 7RRT & 7RRU STANDARD BORE: 1" 3" SERIES 7000 (AAR NO. E089012) The Jamesbury polymeric-seated flanged ball valves offer a patented flexible-lip seat design that provides
More informationType 56 Butterfly Valve
Standard Features (Sizes -/2" ") Standard model (-/2" ") has Body and Disc for better chemical resistance at temperatures higher than can be achieved with. " has body and disc as standard. Our 3/3 stainless
More informationSERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY
SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY Flow capacity* 200 sccm to 500 slpm (0.007 to 17.6 scfm) Vacuum to 2,300 psig (158 bar) inlet, 100 psig (7 bar) outlet
More information87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More information87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
More informationBaumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves
Product Bulletin D103333X012 Baumannt 24000CVF Carbon & 24000SVF Stainless Steel Flanged Control Valves The Baumann 24000CVF and 24000SVF line of control valves (figures 1 and 2) can be utilized for the
More informationInstruction Manual. Pressure Relief Valve. PRV22 (All Models) PRV16 (All Models)
Pressure Relief Valve PRV22 (All Models) PRV6 (All Models) Page 2 of 20 Issue: 4.0 General Description The Binks mechanical Pressure Relief Valve offers a practical solution for the prevention of Smart
More informationFisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
More informationConsolidated* 1900 Series Safety Relief Valve
GE Oil & Gas Technical Specifications Rev. D 12/2016 Consolidated* 1900 Series Safety Relief The highly adaptable 1900 Series Safety Relief is designed to meet numerous application requirements. GE Data
More information