Flanged chemical seals series D
|
|
|
- Silvester Poole
- 5 years ago
- Views:
Transcription
1 Flanged chemical seals series D hemical seals with built-in flange Flange facing and diaphragm of the same material (D8, D85) Fluid temperature from -60 to +00 D80 DN 5 mm D80 DN > 5 mm Designed for process, chemical, petrochemical, petroleum, power, waste treatment industries, etc. Used when the process monitored requires an interface protecting the measuring device from the fluid to be measured (viscosity, corrosion, contamination, temperature, etc.). D8 D85 D80 models for DN less than or equal to 5 hemical seals with built-in flange, Raised face ANSI ISO and EN Min. M.R. in lass DN PN DN bar (0 ) 50 0/6 to 5/0 Ø M in mm /" /" " Min. M.R.: Minimum measuring range in bar for a Ø 00 mm pressure gauge. Maimum pressure according to the PN of the flange and its standardised pressure / temperature relation. For lower measuring ranges, use series D5/D35. DN Flange Stainless steel.0 (AISI 36). Face RF Diaphragm (Ø M) Stainless steel.35 (AISI 36) Option Wetted parts (Diaphragm and face joint): astelloy 76 (.89) onnection apillary option G / female thread Standard length = m; G / female connection Maimum length = m Page
2 D80 models for DN greater than 5 hemical seals with built-in flange, Raised face ANSI ISO EN Min. M.R. in bar DN lass PN PN Vacuum and pressure Pressure 3 / "/ / "/ / " / "/ / 3" / " ,6 Min. M.R.: Minimum measuring range in bar for a Ø 00 mm pressure gauge. Maimum pressure according to the PN of the flange and its standardised pressure / temperature relation. Ø M Flange Options Stainless steel.0 (AISI 36). RF face. Other flanges (as per standard JIS, RTJ face, tongue, groove, spigot, etc.) Diaphragm (Ø M) Stainless steel.35 (AISI 36) Options astelloy B (.67) ; astelloy.76 (.89) astelloy (.60) ; Uranus B6 (.539) onnection apillary option Diaphragm coating and flange facing (Ø d) G / female thread Standard length = m; G / female connection Maimum length = m PTFE thickness 0.0 mm alar thickness 0. mm Gold thickness 5 µm D8 models hemical seals with built-in flange, Raised face Flange facing and diagram made of Tantalum or astelloy ANSI ISO EN Min. M.R. in bar DN lass PN PN Vacuum and pressure Pressure 50 / " / 3" / " ,6 Min. M.R.: Minimum measuring range in bar for a Ø 00 mm pressure gauge. Maimum pressure according to the PN of the flange and its standardised pressure / temperature relation. Flange face: Raised face (RF) Finish: Ra 0. Ø M Flange Stainless steel.0 (AISI 36). RF face Flange facing and diaphragm astelloy B (.67) ; astelloy 76 (.89) ; (Ø d) astelloy (.60) ; Tantalum onnection apillary option G / female thread Standard length = m; G / female connection Maimum length = m Ma. fluid temperature astelloy = 50 ; Tantalum = 00 Option Ma. = 00 Page
3 D85 models hemical seal with built-in flange, Process face made of special materials (onstructed on request, contact us) ANSI ISO EN DN lass PN PN 50 / " / 3" / " Maimum pressure according to the PN of the flange and its standardised pressure / temperature relation. Process face Face in contact with the fluid astelloy B (.67) ; astelloy 76 (.89) to be measured (diaphragm astelloy (.60);Titanium; Uranus B6 (.539) and flange facing) Monel 00 (.360); Nickel (.066) All types of face leaning ring for mounting between flanges ANSI ISO DN lass PN D D ode " " " ød ød / NPT 30 Mounting Raised face (RF) or Flat face flanges Material Stainless steel.0 (AISI 36) Options Other materials (contact us) Diaphragm material Options Other types of face (RTJ) (contact us) / NPT plug (code ) ode Material D80 DN 5 D80 DN > 5 D8 D85 Stainless steel (.35) X X 3 Uranus B6 (.539) X X 5 astelloy B (.67) X X X 6 astelloy 76 (.89) X X X X A astelloy (.60) X X X 7 Tantalum X 8 Titanium X 9 Monel 00 (.360) X Option D8 igh Temperature 00 G astelloy B (.67) X astelloy 76 (.89) X J astelloy (.60) X K Tantalum X hemical seal filling liquid ode Type of liquid RS0 No filling RS Standard liquid RS ow temperature liquid RS iquid for oygen and chlorinated products; Pma. 50 bar at 0 RS Vacuum and absolute pressure RS igh temperature liquid Page 3
4 Standardised flange dimensions ISO or ANSI B6-5 FANGES ISO ode ANSI ODE PN lass Ø D Ø K Ø N f Ø d 5 / 0/ D 3/ 3 0/ E 0/ / F "/ / / G "/ /50 900/ / / " /50 900/ / / K 3" / " V 5/ FANGES as per EN09- DN ode PN Ø D Ø K Ø N f Ø d 5 0/ D 0/ E 0/ / G 63/ / / / K / / Page
5 Flange face definition tables for chemical seals D80 DN > 5 and D85 ISO PN and 0 EN09- PN 0 to 00 ISO ANSI EN09- Flanges ISO / ANSI / EN Flanges ISO PN 0 and 50 ANSI lass 50/300 ISO PN ANSI lass 600/900/500/500 odes odes odes Flat Face FF (type A) A G Raised Face (type B) (RF de,6) R Raised Face (type B) (RF de 6,) Raised Face RF (type B) B Male tongue ( type - type ) I Male tongue ( type - type ) I Male tongue (type ) K K Female groove ( type D - type D) Female groove ( type D - type D) Female groove (type D) D M N Male spigot ( type E - type E) M N Male spigot ( type E - type E) E O P O P Male spigot (type E) Female spigot ( type F - type F) Female spigot ( type F - type F) F Q Q Female spigot (type F) Ring joint face (RTJ) (type J) Ring joint face (RTJ) (type J) Flange facing finishes Finishing: standard machining as per Standard Other finishes on request: Stock Finish Spiral Serrated oncentric Serrated Smooth Finish old Water Finish Page 5
6 odification Type of chemical seal D80 - D8 - D85... digit Mounting and type of apillary 5 digit Direct mounting Stainless steel capillary with stainless steel protection Stainless steel capillary with stainless steel protection and PV sheath Stainless steel capillary with reinforced stainless steel protection For special capillary interior diameter.5 mm (separators mounted on MX, MZ, MA, ME, RPP, RD) Stainless steel capillary with stainless steel protection.5 Stainless steel capillary with stainless steel protection and PV sheath.5 Stainless steel capillary with reinforced stainless steel protection.5 apillary length 6 digit No apillary (direct mounting) ength m ength.5 m ength m ength 3 m ength m ength.5 m ength 5 m ength 6 m ength 7 m ength 8 m ength 9 m ength 0 m ength m ength m onnection on measuring instrument side 7 digit G / female G / female / NPT female / NPT female Flange standard 8 digit ISO flange ANSI B 6-5 flange DIN 50 flange EN09- Flange material 9 digit Stainless steel 36 (.0) PN 0 digit ANSI lass 50 lass 300 lass 600 lass 900 lass 500 lass 500 ISO / EN PN 0 PN 6 PN 0 PN 5 PN 0 PN 50 PN 00 PN 50 PN 50 PN 0 DN digit ANSI (see table page ) ISO / EN (see table page ) Flange face () digit See table («Definitions of flange faces» on page 5) Diaphragm material 3 digit See table («Diaphragm material» on page 3) Diaphragm coating and flange facing digit No coating () (3) PTFE 0.0 mm () (3) AAR 0. mm D D A B G J 0 E 3 F A D N D E F G J K M 0 () D8: Raised faces codes B or G only D80: DN 5 raised faces codes B and G only () ecept Tantale diaphragm (3) ecept D80, DN5, DN0 and DN5 EN/ This data sheet must only be copied in full. Page 6
Diaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
Diaphragm seal with flange connection With internal diaphragm, threaded design Model , large working volume
Pressure Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.41, large working volume WIKA data sheet DS 99.32 for further approvals see page 7 Applications Aggressive,
Large Flange Connections Specification Type LF
General Specifications Large Flange Connections Specification Type LF Application Flange type diaphragm seals are commonly used in applications which involve processing of Chemicals, Petroleum products,
Diaphragm seal with flange connection Cell-type with extended diaphragm Model
Diaphragm seals Diaphragm seal with flange connection Cell-type with extended diaphragm Model 990.35 WIKA data sheet DS 99.30 for further approvals see page 7 Applications Aggressive, highly viscous, crystallising
Diaphragm seal with threaded connection Threaded design Model
Pressure Diaphragm seal with threaded connection Threaded design Model 990.10 WIKA data sheet DS 99.01 for further approvals see page 6 Applications For aggressive, hot, corrosive, environmentally hazardous
Diaphragm seal with flange connection With internal diaphragm Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm Model 990.26 WIKA data sheet DS 99.26 for further approvals see page 7 Applications Aggressive, highly viscous, crystallising
Standard features. Service intended. Design Internal diaphragm. Accuracy Refer to gauge model
Pressure gauge with diaphragm seal Model: P761 (Pressure gauge with inline type diaphragm seal) P762 (Pressure gauge with extension type diaphragm seal) P763 (Pressure gauge with pad type diaphragm seal)
USF INTERNAL DIAPHRAGM, FLANGED TYPE
The USF construction is designed for those applications where the existing process connection is too small to use a flush diaphragm seal. The USF consists of an upper and lower housing. The lower housing
KLINGER. Spiral Wound Gaskets. Certified Fire Safe According to API 6FB!
KLINGER Spiral Wound Gaskets Certified Fire Safe According to API 6FB! Summary of the eight versions of KLINGER SWGs, the design principle, materials and mounting instructions. KLINGER Spiral-Wound Gaskets
Diaphragm Seal with flush diaphragm and flange acc.to EN or ASME B 16,5 Pressure gauge in stainless steel
Ed.17.01 Design Diaphragm Seal with flush diaphragm and flange acc.to EN 1092-1 or ASME B 16,5 Pressure gauge in stainless steel Type Lower body Flush diaphragm with flange connection acc.to EN 1092-1
BDTW2X2 FLANGED PROCESS CONNECTION
Badotherm thermowell model TW2x2 is a bar stock type thermowell with a flanged process connection. The construction is available with straight, stepped, or tapered stem. The standard material is AISI 36(L)
Fittings. Elbow Pipe. Specifications:
Elbow Pipe This type of fitting is widely used in piping systems to connect two straight sections of pipes of equal or different nominal diameter and with a curvature at a certain angle to change its direction;
Thermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld
Thermowells Thermowell with flange (solid-machined) Model TW10-F, full penetration weld design Models TW10-P and TW10-R, with double fillet weld WIKA data sheet TW 95.10 Applications Petrochemical industry,
Thermowell, weld-in or with flange (solid-machined) Version per DIN form 4, 4F Models TW55-6, TW55-7
Thermowells Thermowell, weld-in or with flange (solid-machined) Version per DIN 43772 form 4, 4F Models TW55-6, TW55-7 WIKA data sheet TW 95.55 Applications Chemical industry, process technology, apparatus
Data Sheet 102/103, 202/203, 302/303 Flanged Diaphragm Seal
FETURES thin PTFE gasket between the diaphragm/bottom housing ensures a leak-tight, corrosion resistant seal ontinuous duty design prevents loss of process fluid if pressure instrument is removed or fails
Thermometer in stainless steel with capillary for mounting in thermowell or for direct mounting
Ed.17.02 Design Type Case diameter in stainless steel for mounting in thermowell or for direct mounting F73 Dim 100 mm or 160 mm Accuracy Class 1,0% DIN EN 13190 Case Glass Stainless steel with bayonet
SI-02. Features. Electromagnetic Flowmeter for General Applications. Description: Application:
SI-02 Electromagnetic Flowmeter for General Applications Description: Features / Universally applicable / Separate or compact measuring transmitter / Variety of lining material / DN15 to DN2000 / DIN-
Diaphragm pressure gauge per EN 837-3,
Diaphragm pressure gauge per EN 837-3, chemical design, NS 100/160,Type series BA2 Features Diaphragm pressure gauge Nominal ranges -400 mbar to -1...24 bar, 0 25 mbar to 0 25 bar High quality case with
Differential pressure
Differential pressure 228 Overview Differential pressure 230 VEGADIF 65 232 Chemical seal 236 Oval flange adapter, mounting bracket, cutting ring screwing 238 Valve block 227 Overview Differential pressure
Richter Chemical Control Valves
Richter Chemical Control Valves Heavy duty bellows for permeating media Corrosion-resistant PFA-lined DIN and ANSI face to face lengths Fields of application Control of corrosive, pure and/or slightly
Rosemount 1199 Diaphragm Seal Systems (European Offering)
Product Data Sheet Rosemount 1199 Rosemount 1199 Diaphragm Seal Systems (European Offering) FOR ROSEMOUNT 3051, 1151, AND 2088 TRANSMITTERS EXPANDED TRANSMITTER USE Extreme hot and cold temperatures Corrosive
Spare List SPL/266XXX-EN Rev. B. Models 266XXX spare parts list. 2600T Series Pressure Transmitters Engineered solutions for all applications
Spare List SPL/266XXX-EN Rev. B Models 266XXX spare parts list 2600T Series Pressure Transmitters Engineered solutions for all applications Models 266XXH DP style transmitter with barrel housing 6 0 9
Thermometer in stainless steel with vertical stem in stainless steel
Ed.18.01 Design Thermometer in stainless steel with in stainless steel 1.4571 Design EN 13190 Case diameter Dim 63, 100 eller 160 mm Accuracy Class 1,0% acc.to DIN EN 13190 Type Case Glass 5500 = case
Magnetically controlled liquid level indicator. Type: ITA. Technical Catalogue
Magnetically controlled liquid level indicator Type: ITA Technical Catalogue ITA with Aluminum- Indication rail and switch ITA with ma-output signal and digital display with volume linearization ITA with
FN04. Liquid level sensor with continuous detection. Level Measurement and Monitoring
Level Measurement and Monitoring FN04 Liquid level sensor with continuous detection Level measurement unaffected by foam formation, conductivity, pressure or temperature Remote indication over very long
With World Class Quality
Gaskets With World Class Quality Superlite Jointings Private Limited ( AN ISO /TS : 16949-2009 COMPANY ) Mounting Instructions The principle The spiral wound function is based on the metal winding/ filler
Thermometer in stainless steel with adjustable stem in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell
type stainless steel Ed.17.01 Design Thermometer in stainless steel in stainless steel. Compression fitting for direct mounting or mounting in separate thermowell Type Design EN 13190 Case diameter Dim
Type 431, 433 PN 160. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 431, 433 PN 160 Metric Units Flanged Safety Relief Valves spring loaded Facts The-Safety-Valve.com LWN 465.03-E 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle
Datasheet Rev.1 Feb 2016 Orifice plate multi-holes
Datasheet Rev.1 Feb 2016 rifice plate multi-holes Suitable if little space available Accuracy, repeatability and reliability of the flow element Non-standardized flow element but designed and manufactured
VESSEL & REACTOR VALVES. VD Series DISC VALVES PROCESS VALVES
VD Series VESSEL & REACTOR VALVES DISC VALVES PROCESS VALVES FULL FLOW BOTTOM OUTLET VALVES Tank Bottom Disc Valve M Ring for high temperature & vacuum. Other sealing systems are available Code: VD4R-VD6R
WYATT Orifice flow PrOducTs
WYATT Orifice Differential producers, specifically orifice plates, are used in flow measurement due to their simplicity, ease of installation, tolerance to extreme atmospheric and process conditions, and
Thermowells. Excellence the World can Measure TM. Temperature Products. Fabricated - Screwed & Flanged Connection. General Description.
Thermowells abricated - Screwed & langed onnection Temperature Products ata sheet : TWELL2/2012 y Wide Range of Materials - Stainless Steels - Exotic Materials y hoice of Process onnections - langed -
Diaphragm pressure gauge
Diaphragm pressure gauge with switch function, NS 00/60,Type series BE2 Features Diaphragm pressure gauge with switch function High quality case with bajonet ring NS 00/60 per EN 837-3 S, alternative safety
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
THE SPECIALIST IN LEVEL AND FLOW
Magnetically controlled liquid level indicator ITA with Aluminum- Indication rail and switch Type: ITA ITA with ma-output signal and digital display with volume linearization ITA with steam casing ITA
Pressure transducers DMU 02 Vario (flush)
Process engineering (flush) Ideal for hygienic processes Connection technology with numerous versions Extremely resistant to shock, pulsation and vibration Best dynamic pressure resistance at high load
Datasheet Rev.4 Jan 2015 Orifice plate - Overview
Datasheet Rev.4 Jan 2015 Orifice plate - Overview Orifice plate design based on ISO5167, BS1042, ASME.MFC.3M and ISO TR15377 :2007 industry standards Accuracy, repeatability and reliability of the flow
VESSEL & REACTOR VALVES. VR Series RISING DISC PROCESS VALVES. Sold by: G&W Industrial Sales
VR Series VESSEL & REACTOR VALVES RISING DISC PROCESS VALVES CRUST BREAKING BOTTOM OUTLET VALVES Rising Disc Valves M Seal for high Pressure & Temperature. Dual Seal, Soft Seal, M Ring and M Control are
Orifice Plates. All types of Orifice Plates and. relative products
Orifice Plates All types of Orifice Plates and relative products Orifice Plates for Raised Face Flanges Series OPRFF Principle OPRFF orifice plates are used as primary elements in flow measurement of liquid,
XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
NEOTECHA NXR PFA LINED BALL VALVES
These PFA lined ball valves are used in a wide variety of applications in many industries FEATURES GENERAL APPLICATION The valves are ideally suited for corrosive applications, requiring reliable performance,
ISO 9001:2008 certified
c ISO 9001:2008 certified 3/14 www.setexproducts.com INTRODUCTION SETE Thermowells serve two primary functions: (1) extend temperature instrument life by protecting sensing elements from harsh process
METAL & DUAL SEATED PISTON VALVES
VP Series VESSEL & REACTOR VALVES METAL & DUAL SEATED PISTON VALVES PROCESS VALVES HIGH PERFORMANCE PISTON VALVES Dual Seal Piston Valve Code: VP4D-VP6D High sealing performance of Dual Seal specially
Mechatronic pressure measurement. Applications. Special features. Description
Mechatronic pressure measurement Diaphragm pressure gauge with switch contacts Model 432.56, high overload safety up to 100 bar Model 432.36, safety version, high overload safety up to 400 bar WIKA data
Thermowell Data This Section Contains
Industrial Process and Sensor 2109 Holland Street Alton, Illinois 62002 Phone 618-465-7623 FAX 618-465-7623 WE CAN TAKE THE HEAT! Thermowell Data This Section Contains General Reference Data Please For
O to 15,000 psi and media temperature between -130 F and 752 F. Examples of Typical Diaphragm Seal Applications
Diaphragm Seals > Diaphragm Seals Diaphragm Seals Diaphragm seals, also referred to as chemical seals, are used to isolate pressure gauges, switches and transmitters from clogging and/or corrosive media.
THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES
THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES The manufacturer guarantees only English text. Available on our web site:
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
High-Tech with History
High-Tech with History The story of Schmierer GmbH has a very long tradition. Anna + Eugen Schmierer founded the company in Frankfurt/Main in the year 1932; first starting with a repair shop for measuring
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
THERMOWELL BASIC TRAINING
THERMOWELL BASIC TRAINING 1 PURPOSE OF TRAINING WHY CONSTRUCTION TESTING INSTALLATION HOW INSTALATION CONSEQUENCES OVERVIEW OF POSSIBLE MODELS Why to use thermowells? Protection of the temperature sensor
DP Series Low Pressure Pneumatic Diaphragm Valves 316L SS/ASTM A479. Machine finished. FC-01 Standard Cleaning and Packaging
iaphragm Valves iaphragm Valves V-0 P Series ow Pressure Pneumatic iaphragm Valves Features Minimum particle generation and dead space Fully contained seat to provide excellent resistance to swelling and
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150
Page 1 of 6 TI-P133-77 ST Issue 1 M21Si ISO and M21Vi ISO Ball Valves DN15 to DN150 Description Both the M21Si and M21Vi are reduced bore ball valves, with a single piece body, having ISO mounting as standard.
SITRANS P measuring instruments for pressure
Overview Supplementary electronics for 4-wire connection Structural design Dimensions (W x H x D) in mm (inch) Electrical connection 80x10x60 (3.15x4.7x.36) Screw terminals (Pg 13.5 cable inlet) or Han
Electromagnetic flowmeters. dg: NEW. Sensor MUT 2200 EL DS100-2-ENG 1/12
Electromagnetic flowmeters dg: www.oryana.com.ar NEW Sensor MUT EL DSENG 1/ Sensor MUT EL MUT EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water cycle and process applications.
BM SERIES COMPACT GUIDE WAVE GUIDED WAVE RADAR LEVEL INSTRUMENTS
GUIDED WAVE RADAR LEVEL INSTRUMENTS DESCRIPTION The microwaves impulses at high frequency travel through a stainless steel guide and they are reflected on the surface of the fluid to analyze. The period
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up to 0... 0 bar Output signals
Triple offset valve with metallic seat for High performance. Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN and ASME B16-34
Type series booklet 8613.1783/4--EN Triple offset valve with metallic seat for High performance Class 300: 6 to 36 (DN 150 to 900) Design in accordance with EN 12516 and ASME B16-34 Applications LNG process
8.27/210 * 7.28/ / / /108. n x d. b f ML00343b. Dimensions are in inches/millimeters *8.86/225 for Pg 13.5 with adapter 2.
SITRANS P DSIII Pressure Transmitters All versions of the SITRANS P transmitter, DS III series, are smart two-wire transmitters The output signal is a load-independent direct current of 4 to 20 ma proportional
MDV SERIES THREE WAY BALL VALVES
MDV SERIES THREE WAY BALL VALVES 1/2 THRU 12 ANSI 150# THRU ANSI 2500# FULL PORT AND REDUCED PORT BLOW OUT PROOF STEM METAL AND SOFT SEATS The Jarecki MDV Series ball valves are available in a variety
Page 1 Worldwide Re R v e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
R ED 7. Coulton Instrumentation THERMOWELLS. Data Sheet SYSTEM FEATURES SCOPE TESTING AND CERTIFICATION DESIGN MATERIALS DS0796-R7
Data Sheet Coulton Instrumentation SYSTEM FEATURES * Manufactured from selected materials * Special designs on application * Customised process connections * Low installed cost with assured quality SCOPE
Heavy Duty Thermowell for the Oil & Gas Industry. Engineered solutions for optimized and dependable process measurements
Data sheet Heavy Duty hermowell for the Oil & Gas Industry Engineered solutions for optimized and dependable process measurements onstructed from durable, high-quality materials for use in heavy duty applications
ALTOFLUX IFS 4000/4005
KROHNE 03/2002 7.02351.22.00 GR ALTOFLUX IFS 4000/4005... result of more than 40 years experience with electromagnetic flowmeters Liner made of KROHNE Teflon -PFA or other fluorines Dimensionally stable,
94020 Conservation Vent (Pressure & Vacuum) Features
The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents
1071 Cast Steel Globe Steam Stop Valve (Flanged)
1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working
FLY SERIES CONTROL VALVES
FLY SERIES CONTROL VALVES Product Features Fly Series - Control Valves Armstrong Delta2 - FLY SERIES is a globe single seat Control Valve with a robust construction designed for a wide range of process
Richter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
RHM80. High Flow Coriolis Mass Flow Meter. Features. Applications. Benefits
RHM80 High Flow Coriolis Mass Flow Meter Features Standard pressure ratings up to 341 bar (4946 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down to 0.15% Density uncertainty
M15 ISO Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Flexpro. For Enhanced Joint Integrity. Style PN Normally used in male/female, tongue & groove, and other recessed flange configurations.
Flexpro For Enhanced Joint Integrity Although relatively new to the U.S. market, the Flexpro gasket has been providing an extremely tight, reliable seal in a wide range of applications throughout Europe
seamless, double walled, made of , option: Hastelloy and other materials Heating jacket (option)
General Data Series 6N Nominal Size DN / -500 / 6 20 Nominal Pressure PN / ANSI 10-40 / Class - Characteristics equal percentage or Rangeability 40:1 guide stem guided, option: double guiding (retrofit
MDV SERIES 3 WAY BALL VALVES
MDV SERIES 3 WAY BALL VALVES Diverting ball valves for industrial and process applications. Design Pressure Rating 150# to 1500# Available in Sizes ½ to 12 2500# Available in Sizes ½ to 4 Valve Size 1/2
METAL SEATED BUTTERFLY VALVES
QF Series QUARTER TURN VALVES METAL SEATED BUTTERFLY VALVES PROCESS VALVES HIGH PERFORMANCE BUTTERFLY VALVES Triple Eccentric Butterfly Valve Code: QFTM Fire safe tested API 6FA Jacket connections (oil
94115 Vacuum Vent (Side Mounted) Features. Vacuum Vent (Side Mounted) Side Mounted
94115 The Shand & Jurs 94115 Vacuum Vent has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum
94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature
The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in
94160 Pressure Relief Vent. Features. Pressure Relief Vent. Designed for high efficiency & economy. Provides maximum flow capacity
The Shand & Jurs provides pressure relief for storage tanks and low pressure vessels. Utilizing a flange mounted design, this economical vent provides maximum flow capacity and high efficiency. The improved
Screw-in and weld-in pockets
Data Sheet 909710 (909721) Page 1/6 Screw-in and weld-in pockets for thermocouples and RTD temperature probes thermometers can be replaced without draining the system pockets in different materials operating
3.2 HP 114 HIGH PERFORMANCE BUTTERFLY VALVE HP 114 TECHNICAL DATA FEATURES GENERAL APPLICATIONS
TECHNICAL DATA Nominal diameter: DN 50 - DN 1200 Metallically up to DN 800 max. PN 16 Face-to-face: EN 558 Series 20, optional Series 25 ISO 5752 Series 20 API 609 Table 1 Flange accommodation: EN 1092
IntraWedge WEDGE FLOW METER Type: IWM
IntraWedge WEDGE FLOW METER Type: Technical Information 01/2011 FLOW THE EXPERT FOR LEVEL AND FLOW Wedge Flow Meter Technical Information Intra-Automation Intra-Automation Technical Information 01/2011
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
GS_-FLANGE SYS SAE 6000 PSI INFORMATION GENERAL. Type Approvals 17
GENERAL SAE 6000 PSI GS-FLANGE Product Page HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 Type Approvals 17 Retain Ring- and 37 Flare Flange
MANUAL WellTEMP 70. Thermowells for General and Harsh Industrial Applications
JSP Industrial Controls Temperature Sensors - NC0993EN - 2016/10 MANUAL WellTEMP 70 Thermowells for General and Harsh Industrial Applications Pressure up to 400 bar, temperature up to 620 C Designed for
Materials : Carbon steel or Stainless steel MERXTRADE BV.
ADE B.V. Size : DN 1/4 to DN 2 Ends : Threaded female BSP, NPT or S.W. Min Temperature : - 30 C in S.S. and - 20 C in carbon steel Max Temperature : + 180 C Max Pressure : 138 Bars (Class 800) Specifications
DH Series High Pressure Springless Diaphragm Valves. Special Cleaning and Packaging 316L SS/ASTM A479. Machine finished
V-9 iaphragm Valves iaphragm Valves s Valves & Regulators H Series High Pressure Springless iaphragm Valves Features Metal-to-metal diaphragm seal Elgiloy diaphragm to provide high strength and corrosion
RHM60. Coriolis Mass Flow Meter with Uncompromising Performance. Features. Applications. Benefits
RHM60 Coriolis Mass Flow Meter with Uncompromising Performance Features Standard pressure ratings up to 490 bar (7107 psi) Temperature ratings from -196 to 350 C (-320 to 662 F) Mass flow uncertainty down
Process Inline Filter, Change-Over
Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#
ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in
M21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
PSG, TSG, SGS, SR Corrosion-resistant PFA and PTFE lining Indication of flow even at very low flow rates Optionally with integrated check valve
Richter and -Way Sight Glasses PSG, TSG, SGS, SR Corrosion-resistant PFA and PTFE lining Indication of flow even at very low flow rates Optionally with integrated chec valve Richter and -way sight glasses
GUILLEMIN COUPLINGS EN / NF E
EN 14420-8 / NF E 29-572 STANDARD LMC s Guillemin couplings are symmetric couplings designed in compliance with EN 14420-8 / NF E 29-572. OPERATION A Guillemin coupling, consist of a seal * on the connection
ISI Marked Class-A & Class-B Water Meters as per IS: 779 / 1994 Conforming to ISO 4064 Standard for Cold Water Meters
Product Range ISI Marked Class-A & Class-B Water Meters as per IS: 779 / 1994 Conforming to ISO 4064 Standard for Cold Water Meters Electromagnetic flow meters for water & waste water applications IBR
TSW400 series Thermowells
Data sheet DS/TSW400 EN Rev. A TSW400 series Thermowells Safe, tough and reliable thermowells for the Oil & Gas industry Measurement made easy Engineered to international standards ISO19001:2000 Manufactured
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME to 6 Sizes
Soft Seated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 2 to 6 Sizes SERIES Features ISO5211 top mounting for manual, air or electric actuators Unique wave line seat reduces torque and extends
x act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
COMPANY SHORT PRESENTATION
Single source supplier of complete piping packages ICARUS SA is a leading single source supplier of complete piping packages and manufacturer of specialty valves, compact flanges acc Norsok L-005 and tailor
O to 15,000 psi and media temperature between -130 F and 752 F. Examples of Typical Diaphragm Seal Applications
Diaphragm Seals > Diaphragm Seals Diaphragm Seals Diaphragm seals, also referred to as chemical seals, are used to isolate pressure gauges, switches and transmitters from clogging and/or corrosive media.
Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry
Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES