Section 1: Lubrication Fittings
|
|
- Barrie Hamilton
- 6 years ago
- Views:
Transcription
1 4 Section 1: Lubrication Military Reference Military Std. # Federal Item ID Product # AS B AS B AS B1 AS B1 AS B AS B1 AS BL AS B AS B AS B AS B AS B AS B AS B AS B AS B AS B AS B AS B AS AS AS S AS S AS S AS S Military Std. # Federal Item ID Product # AS S AS S AS S AS A AS A AS A AS A AS A AS A American National Pipe Thread Code PTF SAE short taper pipe thread NPTF American National taper pipe thread for Dryseal pressure-tight joints NPSM American National straight pipe thread for mechanical joints NPSI American National straight intermediate pipe thread BSP British Standard pipe thread
2 1/8" PTF 7 Used on many industrial machines and heavy equipment B 1610-BL FEATURES: Dirt-excluding ball check Conform to SAE AS35411 Zinc plated Maximum pressure: 10,000 psi Exceeds 48-hour salt-spray test 1958 has specialty cap providing a second seal for dust-proof applications 1 /8" PTF SAE Spl Extra Short 1 /8" PTF SAE Spl Extra Short 1607-B B B B /8" NPT FEMALE Product # Type Overall Length Shank Length Hex Size 1644-B Str. 9/16" 15/64" 7/16" 1610-BL Str. 11/16" 19/64" 7/16" 1607-B Str. 1-1/4" 25/32" 7/16" 1669-B Str. 1-3/4" 1-17/64" 7/16" 1684-B Str. 2-5/8" 2-3/16" 3/8" 1618-B Str. 1" 9/32" 1/2" 1958 Str. 31/32" 1/4" 7/16" 1611-B 30º 29/32" 19/64" 7/16" 1638-B 30º 2-3/32" 1-1/4" 7/16" 1688-B 45º 57/64" 19/64" 7/16" 1620-B 45º 1-1/8" 13/32" 7/16" 1612-B 65º 27/32" 19/64" 7/16" 1623-B 65º 1-7/32" 9/16" 7/16" 1649-B 65º 2-3/4" 2-1/4" 3/8" 1613-B 90º 27/32" 19/64" 7/16" 1606-B 90º 1-13/16" 1-1/4" 7/16" Str. 2-5/8" 7/32" 7/16" Str. 11/16" 5/16" 7/16" º 29/32" 9/32" 7/16" Str. 2-9/32" 7/32" 7/16" Double 70º 27/32" 7/32" 1/2" A L L F I T T I N G I L L U S T R AT I O N S A C T U A L S I Z E
3 8 Section 1: Lubrication 1/8" PTF B B B /8" PTF SAE Spl Extra Short 1620-B B B B 1 /8" NPTF FEMALE B B IMPORTANT INFORMATION NOTE: Geometry modifications and alternate materials available on request. We offer trivalent plating per GMW3044. A L L F I T T I N G I L L U S T R AT I O N S A C T U A L S I Z E
4 Standard Button Head 19 Use in rugged applications such as heavy machinery or construction/off-road equipment. Product # Thread Overall Length Shank Length Hex Size A1184 1/8" PTF 3/4" 11/32" 5/8" A1186 1/4" NPTF 53/64" 27/64" 5/8" /4" NPTF 7/8" 15/32" 5/8" A1188 3/8" NPTF 61/64" 31/64" 3/4" A1190 1/2" NPTF 1-1/16" 35/64" 7/8" C-69 1/8" NPTF(f) 31/32" 13/32" 5/8" M1184* 1/8" PTF 3/4" 11/32" 5/8" FEATURES: Head size helps to minimize breakage Helps to reduce dirt contamination Maximum pressure: 6,000 psi 1401 can be used with thicker/heavy lubricants Dust caps are available A1184 (191135) GM A A /4" NPTF 1 /4" NPTF 3 /8" NPTF C-69 M1184 MONEL A /8" NPTF FEMALE 1 /2" NPTF IMPORTANT INFORMATION * Non-corrosive Monel NOTE: Geometry modifications and alternate materials available on request. We offer trivalent plating per GMW3044. A L L F I T T I N G I L L U S T R AT I O N S A C T U A L S I Z E
5 Relief 21 Use on gearbox housings and bearings (such as king pins, universal joints, etc.) where excessive lubrication pressure is not desirable. Product # Relief Pressure Min. Max. Thread Δ.25 psi 1 psi 1/8" PTF SAE SPL Short Δ 1 psi 5 psi 1/8" PTF SAE SPL Short Δ 7.5 psi 15 psi 1/8" PTF SAE SPL Short Δ 15 psi 25 psi 1/8" PTF SAE SPL Short Δ 45 psi 80 psi 1/8" PTF SAE SPL Short Δ 400 psi 650 psi 1/8" PTF SAE SPL Short * 1 psi 5 psi 3/8" Drive ** 80 psi 140 psi 1/8" PTF SAE SPL Short psi 200 psi 1/8" PTF SAE SPL Short FEATURES: open at pre-determined pressures as shown can be used with either grease or oil is a drive fitting (3/8" drill) is leakproof (1/8" PTF) RECOMMENDED ACCESSORY: 1/8" - 1/4" Bushing (45120) p.196 Figure /4"-28 1 /8" PTF TAPER SAE THD. Spl (SAE-LT) Short 1 /4"-28 TAPER 3 /8" Drive THD. (SAE-LT) 1 /4"-28 1 /8" PTF TAPER SAE THD. Spl (SAE-LT) Short IMPORTANT INFORMATION Δ Dimensions match figure 1 * Drive Fitting (3/8" Drill) ** Leakproof (1/8" PTF) NOTE: Geometry modifications and alternate materials available on request. We offer trivalent plating per GMW3044. A L L F I T T I N G I L L U S T R AT I O N S A C T U A L S I Z E
6 30 Assortments A range of Alemite s most popular fittings are available in convenient assortments and blister packages. Boxes and blister packages are ideal for display or for storage shelves. Packaged Hydraulic Assortments Individual blister packaged fittings for display, American standard or metric threads. Each unit pack contains 10 fittings unless otherwise noted. Product # B1608-B B1743-B B1610-BL B1611-B B1612-B B1613-B B1627-B* B1629-B* B1637-B1 B1641-B B1688-B B1911-B1 B1428*** B1827**** Metric Pack No. B2103 B2105 B2106 B2107 B2108 B2109 B2100** - 9-pc assortment IMPORTANT INFORMATION * B1627-B and B1629-B unit packs contain 5 fittings. ** B pc assortment contains: (2) 2103, 2105, (2) 2106, 2107, 2108, (2) 2109 *** B pc assortment contains: (4) 1641-B, (2) 1637-B1, (2) 1911-B1 **** B pc assortment contains: (4) 1610-BL, (2) 1613-B, (2) 1688-B
7 Vehicle Fitting Assortment 31 This assortment contains six types of popular fittings. An identifying chart is included in the cover. Packaged in a durable plastic box. Product # Type Thread Quantity 1610-BL Str. 1/8" PTF B 45 1/8" PTF B 90 1/8" PTF B Str. 1/4"-28 Taper B1 45 1/4"-28 Taper B1 90 1/4"-28 Taper All-Purpose Fitting Assortment This assortment contains eight types of popular fittings. Also includes two tools for extracting fittings and rethreading holes. An identifying chart is included in the cover. Packaged in a durable metal box. Product # Type Thread Quantity 1610-BL Str. 1/8" PTF B 30 1/8" PTF B 45 1/8" PTF B 65 1/8" PTF B 90 1/8" PTF B Str. 1/4"-28 Taper B1 45 1/4"-28 Taper B1 90 1/4"-28 Taper 12 Product # Description Quantity Fitting Tool for 1/4"-28 thread fittings Fitting Tool for 1/8" PTF fittings 1
8 Metric Fitting Assortment Box contains six types of popular metric fittings. An identifying chart is included in the cover. Product # Type Thread Quantity 2106 Str. 6mm mm mm Str. 8mm mm Str. 10mm Pocket Pack Fitting Assortment Box contains six types of popular fittings. An identifying chart is included in the cover. Product # Type Thread Quantity 1610-BL Str. 1/8" PTF B 45 1/8" PTF B 90 1/8" PTF B Str. 1/4"-28 Taper B1 45 1/4"-28 Taper B1 90 1/4"-28 Taper 6
Equipment Catalog. For inquiries and orders, please contact:
Equipment Catalog 1 2 Table of contents...pages Force Flow 100 Lube Pump... 4 Bucket Pumps... 5 Packing Injection Fitting Body Vent (Bleeder) Fittings... 6 1200 & 1500 Lube Pumps... 7 Hose Assemblies Gages
More informationEnds for Gates Hose. Four Types of Hose Ends
Supersedes Many applications require hose with special ends to provide protection and better coupling for the hose. Ends for Gates Hose Four Types of Hose Ends To be sure you receive the proper hose end,
More informationNEW Items. Wire Rope and Accessories. Eye Nuts, Bolts and Turnbuckles. Roller Chain. kent-automotive.com NI1
In the digital version, you can navigate to each section by clicking on the page numbers. You can return to the Table of Contents by clicking in the header. Wire Rope and Accessories Wire Rope Commercial
More informationA complete LNG FUEling system
A complete LNG FUEling system from the LNG Station Breakaway Coupling CryoMac LNG Fueling Nozzle Cryogenic Hose Quick Disconnect Vent Couplers LNG Tank Receptacle and Fueling Cap to the LNG vehicle Macro
More informationMeter Connection Products: Overview
: Overview Georg Fischer Central Plastics entered the meter connection business in 1955 with the design and introduction of the insulated meter swivel and insulated union. We understand the critical nature
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationE Spray Drying. industries and NEW markets. challenges. Meeting the. of new WELCOME TO DELAVAN
E Spray Drying Meeting the challenges of new WELCOME TO DELAVAN industries and NEW markets SECTION INDEX Special purpose nozzles for use in the Spray Drying industry covering a wide variety of products.
More informationKerotest/Marsh Needle Valves Series N
Series N Kerotest/Marsh N Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs anywhere the flow of fluid must be carefully regulated.
More informationANDERSON GREENWOOD H1 HAND VALVES
Large bore, ⅜ (9.5 mm) diameter orifice, general purpose soft-seated hand valve for pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION A general purpose, soft-seated hand valve designed for
More informationTUFF-SEAL RSSS SERIES STAINLESS STEEL CORD GRIPS. Toll Free Fax
Selection, Service & Quality Solutions TUFF-SEAL RSSS SERIES STAINLESS STEEL CORD RIPS RSSS Series Stainless Steel Corrosion-Resistant Cord Connectors The Tuff Seal RSSS series of corrosion-resistant cord
More informationLIQUID-SPECIFIC PRODUCT LINE: ABRASIVE LIQUID PUMPS SERIES DESCRIPTION OPERATING RANGE: IMPROVEMENTS NOMINAL FLOW RATES:
SERIES 4624B (Cast Iron - Replaces Series 4625 Models) Page 410.1 Issue K SERIES DESCRIPTION The Abrasive Liquid Series heavy duty internal gear pumps utilize hard parts in key wear areas, combined with
More informationTaper Bushing Installation
Taper Installation IMPORTNT NOTE: Please follow the instructions on this sheet in order for the bushing to perform satisfactorily. INSTLLTION 1. Clean all oil, dirt, and paint from shaft, bushing bore,
More informationPARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )
PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and
More informationService Entrance Cable Fittings
Suggested Specifications for Service Entrance Fittings All service fittings shall be approved for the purpose by a nationally recognized testing laboratory, inspection agency or product evaluation organization.
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National
More informationTUFF-SEAL RSR SERIES ALUMINUM CORD GRIPS. Toll Free Fax RSR Series Straight Aluminum Cord Grips G 1
TUFF-SEAL Toll Free -800-70-0975 Fax -800-892-660 COMPLETE ASSEMBLY PART NUMBERS RSR SERIES ALUMINUM CORD RIPS RSR Series Straight Aluminum Cord rips Tuff Seal RSR Series Aluminum Cord rips are UL Listed
More informationTUFF-SEAL RSF SERIES ALUMINUM CORD GRIPS. Toll Free Fax RSF Series Aluminum Flat Cable Cord Grips G 16
TUFF-SEAL RSF SERIES ALUMINUM CORD RIPS RSF Series Aluminum Flat Cable Cord rips Tuff Seal RSF Cord rips are specially designed for heavy-duty, flat cable or festoon system applications. Unique to the
More informationMeter Swivels Insulated Unions Meter Sets Meter Accessories The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com : Overview Georg Fischer Central Plastics entered the meter connection
More informationM7100 Pressure Transducer
Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces Medium to high
More informationPRESSURE REGULATORS. GUIDE to REGULATORS and SERVO VALVES
Master Pneumatic regulators are made in a wide range of sizes to suit nearly all industrial requirements for pneumatic pressure regulation. Good pressure regulation is essential to the efficient use of
More informationFine Spray Nozzles GAS COOLING LIGHT MISTING EVAPORATIVE COOLING
Fine pray s GA COOING IGHT MITING HUMIDIFYING Fogging D U T C o n t r o l M O I T E N i n g EVAPORATIVE COOING FIRE UPPREION AERAting CHEMICA PROCEing E Fine pray s Introduction FU RANGE OF HYDRAUIC ATOMIZING
More informationVALVES. Prospector Series Poppet Valves 1/4" to 2" Air Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves
2 High flow - Cv of 1.2 to 49.5 Durable, robust construction Two mounting styles: inline or subbase 1/4" to 2" ports (SPP or PTF threads) Wide range of ir Pilot Operators available Four functional types:
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationSeries Sump and Sewage Systems
Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column
More information1DIVISION 15- MECHANICAL Section Fire Pumps. A. Single Stage, Double Suction, 9100 Series Horizontal Splitcase Fire Pump (Base Mounted)
1DIVISION 15- MECHANICAL Section 15320 Fire Pumps 1.00 PART 1 -GENERAL 1.01 DESCRIPTION OF WORK: A. Provide pumps for fire suppression. 1.02 SECTION INCLUDES: A. Single Stage, Double Suction, 9100 Series
More information- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
More informationis Central. Gas Water & Waste Water Energy Industrial Your One-Stop Source State-of-the art manufacturing
Experience is Central. Backed by more than 50 years of experience, Georg Fischer Central Plastics is the largest single source supplier for meter connections including products and technologies that prevent
More informationDRY DIAMOND CORE DRILLS INTRO
47 dry diamond core drills DRY DIAMOND CORE DRILLS INTRO dry diamond core drills core drills CORE DRILL KITS accessories DUSDC core drilling conical body The SHARk s conical body is 1mm narrower at its
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More informationMIL-DTL Series I Connectors
RUGGED Self-locking bayonet coupling system 100% scoop proof 500-mating-cycle durability Excellent shock and vibration resistance Environmentally sealed and hermetic versions available VERSATILE Available
More informationPRECISION TOOLS INNOVATIONS
INNOVATIONS 2016 RS126e PREMIUMline light and handy 13.000 N clamping force Right-/ left-handed rotation 2 speed gearbox Speed controller automatic coolant supply High-performance motor Art. no. 108 0126
More informationCompressed Air Filters. Particulate, Moisture, and Oil Removal scfm.
Compressed Air Filters Particulate, Moisture, and Oil Removal 20-500 scfm www.kaeser.com Compressed Air Filters: 20-500 scfm Superior filtration Proper filtration is necessary to ensure consistent air
More informationdry diamond core drills DRILLS INTRO core drills CORE DRILL KITS accessories
65 dry diamond core drills dry DRY diamond DIAMOND core drills CORE core drills DRILLS INTRO CORE DRILL KITS accessories DUSDC the ultimate, smooth cutting, snag free diamond core drill no snagging easy
More informationDIAGRAM FOR CALCULATING PIPE SIZES, DISCHARGE VELOCITIES AND LOSS OF HEAD IN STANDARD STEEL PIPE PIPE FRICTION LOSS CHART
DIAGRAM FOR CALCULATING PIPE SIZES, DISCHARGE VELOCITIES AND LOSS OF HEAD IN STANDARD STEEL PIPE PIPE FRICTION LOSS CHART (For Cast Iron and Concrete Pipes See Note at Right) Lay a straightedge on scales
More informationThreading.
Threading 95 Hand Taps - Carded - Metric Coarse - UNF - BSW 98 98 98 Hand Taps - Bulk - Metric Coarse - Metric Fine - Metric Conduit - Spark Plug - UNC - UNF - BSW - BSF - BA - Brass 99 99 100 100 100
More informationForged Eye Bolts. Working Load Limit (lbs.)* Weight Per 100 (lbs.)
Forged Eye Bolts G-291 Para Español: www.thecrosbygroup.com SEE APPLICATION AND WARNING INFORMATION On Page 180-181 Forged Steel - Quenched and Tempered. Fatigue rated at 1-1/2 times the Load at 20,000
More informationassembly and installation guide
The Arqua Fountain DF4 is a high-quality water bubbler designed to provide accessible, fresh drinking water in public environments. This technical pack includes: Assembly and Installation guide Care and
More informationball valves Ultramite 70 Series Fixed End 2- and 3-way Ball Valves
Fixed End 2- and 3-way Ball Valves Ultramite 70 Series valves are designed to guard against accidental disassembly. The tamper-proof fixed end fittings are welded in place, with the exception of the 7065
More informationTUFFALOY. Resistance Welding Products. Leader in the Industry Since Catalog 2014
Catalog 2014 Resistance Welding Products Leader in the Industry Since 1937 Resistance Welding Equipment & Supplies Service Sales Consulting Seminars table of contents RESISTANCE WELDING PRODUCTS The little
More informationM7100 Pressure Transducer
Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces Medium to high
More information...our linkages, your solution. Rod Ends
...our linkages, your solution ov-rod-ends-divider - Updated - 12-01-2017 Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing.
More informationYARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505
Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high
More informationVIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635.
Page 635.1 Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps Operating 1: Series 8124A Model H8124A Nominal Flow Temp. 2 Viscosity (GPM) 15-200 (M 3 /hr.) 3.4-45 (PSI) To 200 PSI (Bar) To 14 Bar (
More informationMueller Gas Products. Mueller No Blo Service Tee H17500 o ¾ x ¾, 1 x 1, 1 1/4 x 1 1/4, 2 x 2 o 250 PSIG H17502 o 2 x 2
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller No Blo Service Tee H17500 o ¾ x ¾, 1 x 1, 1 1/4 x 1 1/4, 2 x 2 o 250 PSIG H17502
More informationSMP Battery Powered Electromagnetic Flowmeters. Sizes 25, 50 & 80mm
Battery Powered Electromagnetic Flowmeters. Sizes 25, 50 & 80mm FEATURES Unobstructed flow. No moving parts. Ideal for bore water, irrigation, recycled water. Internal Battery powered. Built-in flowrate
More informationDownloaded from MILITARY STANDARD
MIL-STD-1599 NOTICE 4 4 JAN 93 MILITARY STANDARD BEARINGS, CONTROL SYSTEM COMPONENTS, AND ASSOCIATED HARDWARE USED IN THE DESIGN AND CONSTRUCTION OF AEROSPACE MECHANICAL, SYSTEMS AND SUBSYSTEMS TO ALL
More informationStainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications.
Section 16 Stainless Steel Products Products for use in offshore, instrumentation, and compatiblity applications. Contents F22 General Purpose Stainless Steel Filter 1/2" Port Size....................................LE-16-2
More informationApollo Flow Controls A SERIES ALLOY-20 BALL VALVE 1/4-1
399-100-A SERIES ALLOY-20 BALL VALVE 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. FEATURES Investment cast
More informationVIKING. Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps. Operating Range1: Nominal Flow Rates: Section 635 Page 635.
VIKING Section 635 Page 635.1 Heavy-Duty, Foot-Mounted Sealless Internal Gear Pumps Model H8124A Operating Range1: Series 8124A Nominal (GPM) 15-500 Flow (M 3 /hr.) 3.4-114 Pressure (PSI) To 200 PSI Range
More informationAnderson Greenwood Series F29/F33K primary isolation valves
7 Anderson Greenwood eries F29/F33K primary isolation valves Integrally forged, one piece double block and bleed Keyblok assemblies for primary isolation of pressure take-offs, where the valve is mounted
More informationBucket Elevators and Conveyors Commercial Series Material Handling
Agri/Industrial Division Bucket Elevators and Conveyors Commercial Series Material Handling Agri/Industrial Division Chief bucket elevators are built to last and are easy to maintain. Our head section
More informationBucket Elevators and Conveyors Commercial Series Material Handling
Agri/Industrial Division Bucket Elevators and Conveyors Commercial Series Material Handling Agri/Industrial Division Chief bucket elevators are built to last and are easy to maintain. Our head section
More informationSERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY
SERIES AK 1400T SINGLE STAGE PRESSURE REGULATOR TIED DIAPHRAGM SAFETY AND RELIABILITY Flow capacity* 200 sccm to 500 slpm (0.007 to 17.6 scfm) Vacuum to 2,300 psig (158 bar) inlet, 100 psig (7 bar) outlet
More informationSERIES 800 Quality Design Features Assure Long, Trouble-Free Service
Heavy Duty Sump Pumps SERIES Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Industrial Process Pollution Control Sump Drainage Flood Control Hazardous, Toxic & Inflammable
More informationLUBRICATION PUMP Z2 CENTRAL LUBRICATION
LUBRICATION PUMP APPLICATION Lubrication pumps are used as a source of pressure lubricant in the circuits of two-line central lubrication systems. Pumps can be used for lubrication of high number of lubricated
More information// INDEX // HOSE // FITTINGS ALFAGOMMA ALFAGOMMA // INDEX.
STEAM ALFAGOMMA // INDEX // INDEX 2 ALFAGOMMA // HOSE 350AA Steam 6 bar (90 psi) - Hot water 15 bar (225 psi)...10 354AA Steam 6 bar (90 psi)...10 340AA Steam 18 bar (270 psi) - Steel braided...11 340AH
More informationGoulds Multistage Process Pumps
Goulds 3355 Multistage Process Pumps Multiple nozzle orientations to fit your piping configurations. Radial Suction Configuration. Radial nozzles are rotatable at 90 increments. Goulds Model 3355 Multistage
More informationANDERSON GREENWOOD OS&Y GAUGE VALVES SERIES M5K/M5AK/M5YK
SERIES M5K/M5AK/M5YK Root isolation valves with outside screw and yoke, bolted bonnet construction for pressures up to 6, psi (414 barg) FEATURES M5YK GENERAL APPLICATION M5K-L M5K series gauge valves
More informationCompressed Air Filters. Particulate, Liquid, and Oil Removal ,875 scfm. kaeser.com
Compressed Air Filters Particulate, Liquid, and Oil Removal 20-11,875 scfm kaeser.com Compressed Air Filters: 20-11,875 scfm Superior filtration Proper filtration is necessary to ensure consistent air
More informationThe no more lube range
The no more lube range www.renold.com 2 I Renold Syno Chain Renold Syno Chain Three solutions, one aim. No more lube! If it s an easy life you want, if lubrication causes you problems, then Renold has
More informationSuffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White
Wet-R-Dri Valve A TA STYLE LIGHTWEIGHT COMPACT VERSATILE B I.D. Size Standard Model Detent Model Standard Material Max. Working Body Disc Pressure WD00 AL B. WD0 AL B. Aluminum WD00 GI B. WD0 GI B. Grey
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. STARTING SERIAL NUMBER
(7x) 48 4 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Linemen Magnetic Drill CATALOG NO. 7 7 2788-20 77 83(3x) STARTING SERIAL NUMBER 144 79 G7A REVISED BULLETIN
More informationLubrication Labeling and Identification
Lubrication Labeling and Identification WHY USE OIL SAFE LABELING PRODUCTS? Manage your fluid transfer from bulk storage to point of use. The oil safe unique Visual Lubrication System of products combines
More informationMeter, PD Series, H8-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, H8-S1, S3, S5, S6 and S7 Bulletin PO01010 Issue/Rev. 0.2 (1/18) 2 Bulletin PO01010 Issue/Rev. 0.2 (1/18) Item Description Quantity Part Number H8-S1 H8-S3, S5 H8-S6, S7 1 Adapter
More informationLUBRICANTS AND SURFACE TREATMENTS
LUBRICANTS AND SURFACE TREATMENTS GREASES ASSEMBLY PASTES OILS SURFACE TREATMENTS LOCTITE LUBRICANTS THE ULTIMATE ANSWER TO YOUR LUBRICATION PROBLEMS LUBRICANTS AND SURFACE TREATMENTS CONTENTS INTRODUCTION
More informationball valves 7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves
7 Series Fire Safe 2-way, 3-piece Bolted Ball Valves HOKE s 7 Series Fire Safe Valves meet demanding application requirements in the production environment of chemical and petrochemical processing facilities.
More informationSERVICE PARTS LIST BULLETIN NO M18 FUEL 1-1/2" Magnetic Drill CATALOG NO. G96A
65(7x) 48 64 CATALOG NO. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 FUEL 1-1/2" Magnetic Drill 67 76 2787-059 77 83(3x) STARTING SERIAL NUMBER 79 G96A Torque Chart on
More informationDETAIL SPECIFICATION SHEET FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
INCH-POUND MS51532C 5 March 2018 SUPERSEDING MS51532B 16 February 1988 DETAIL SPECIFICATION SHEET FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED This specification
More informationEE300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features
EE300ExHT The EE300Ex humidity and temperature transmitter fulfils the requirements of the ATEX directives on intrinsically safe operating equipment for use in potentially explosive atmospheres in zone
More informationTUFF-SEAL TM TECHNICAL REFERENCE SECTION
TUFF-SEAL TM TECHNOLOY TUFF-SEAL TM TECHNICAL REFERENCE SECTION OPERATIN TEMPERATURES Material Temperature range Aluminum -40 F to +300 F (-40 C to +149 C) Buna-N -40 F to +50 F (-40 C to +11 C) Nylon
More informationDiaphragm Meters. Residential, Commercial and Industrial. Residential Commercial Industrial / City Gate / Stations AL-2300 AL-1400 AL-5000
SB 3500 Diaphragm Meters Residential, Commercial and Industrial AL-800/AL-1000 AL-1400 AL-2300 AL-5000 AC-630 AL-425 AC-250 AR-250 Residential Commercial Industrial / City Gate / Stations Table of Contents
More informationCatalog 2009 TUFFALOY. Resistance Welding Products. Leader in the Industry Since 1937
Catalog 2009 Resistance Welding Products Leader in the Industry Since 1937 table of contents ELECTRONICS STANDARD ELECTRODES RESISTANCE WELDING PRODUCTS The little man is now seventy years old. It was
More informationFlush Thread PVC Well Screens, Casings and Accessories
A brand of Aqseptence Group Flush Thread PVC Well Screens, Casings and Accessories A full line of PVC products that include: Vee-Wire well screens, slotted well screens, casings and accessories for the
More informationEE300Ex-HT. Humidity/Temperature Transmitter for Intrinsically Safe Applications. Typical Applications. Features
EE300ExHT The EE300Ex humidity and temperature transmitter fulfils the requirements of the ATEX directives on intrinsically safe operating equipment for use in potentially explosive atmospheres in zone
More informationSuitable for use in a variety of fluid systems.
Suitable for use in a variety of fluid systems. General Description Pipeline Wye Strainers are in thousands of applications in chemical, petroleum, pulp and paper, and utilities, as well as numerous commercial
More informationUNIVERSAL PRODUCT LINE: CAST IRON MAG DRIVE PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
UNIVERSAL PRODUCT LINE: SERIES 8124A Section 1403 Page 1403.1 Issue A TABLE OF CONTENTS Features & Benefits...2 Model Number Key...2 Materials of Construction...4 Special Materials & Options Selection
More informationPARTS MANUAL LKO-100D ORANGE PEEL GRAPPLES V12153 X
PARTS MANUAL LKO-00D ORANGE PEEL GRAPPLES V5 X TABLE OF CONTENTS LKO-00D ORANGE PEEL GRAPPLE Information Identification Number ---------------------------------------- Nomenclature ---------------------------------------------------
More informationDIVISION 15- MECHANICAL Section Fire Pumps
DIVISION 15- MECHANICAL Section 15320 Fire Pumps 1.00 PART 1 -GENERAL 1.01 DESCRIPTION OF WORK: A. Provide pumps for fire suppression. 1.02 SECTION INCLUDES: A. Vertical Turbine Fire Pump RELATED DOCUMENTS:
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).
Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards
More informationCryogenic Service Valves
Cryogenic Service Valves Superlok cryogenic valves are used in many industries in a broad range gas service such as oxygen, nitrogen, argon and more. The valves incorporate specialized materials that maintain
More informationTrans-wheels. Ball Transfer Tables are a transfer medium for the multi-directional movement of goods on a horizontal plane.
Mini Wheel Conveyor Track The successful MINI WHEEL system is ideal for conveying small and light to medium weight packages down shallow gradients. Each 25mm wheel clips into it s own nylon cradle, which
More informationThermal Solutions Worldwide SECTION C. Industrial Thermocouples and RTDs. Straight Thermocouples Assemblies with Metal Protection Tubes C-5
Thermal Solutions Worldwide SECTION C Industrial Thermocouples and RTDs Straight Base Metal Thermocouple Elements C1 Angle Base Metal Thermocouple Elements C2 Straight Noble Metal Thermocouple Elements
More informationCustom-Designed Clamps. Machined Versions. Online Configurator for Custom-Designed Clamps A56.
Custom-Designed Clamps Machined Versions Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on developments, made of thermoplastics,
More informationICECUT LIGHT POWERFUL SAFE. The ultimate core cutting system
ICECUT LIGHT POWERFUL SAFE The ultimate core cutting system FEATURES Walter is proud to present a completely redesigned line of magnetic drilling units and annular cutters When you pair the best drilling
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Vertical
More informationAllied Machine & Engineering Corp. Accuport 432 Port Contour Cutters -1
Allied Machine & Engineering Corp. Accuport 4 Port Contour Cutters - Features and Benefits AMEC AccuPort 4 Port Contour Cutters are produced to strict manufacturing tolerances. This provides the customer
More informationP100G 5 P117G 6 P117LG 7 W117G 8 W117LG 9 P119G 10 J205G 11 J205LG 12 P605
PRESSURE SWITCHES We manufacture a wide of pressure switches to meet the needs of any industrial application and operating environment. Our preset switches are set at the factory to the specifications
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES III AND IV, METRIC
METRIC MIL-DTL-38999/28H 27 February 2018 SUPERSEDING MIL-DTL-38999/28H 12 May 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES III AND IV, METRIC
More informationCash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control
Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety
More informationAPI 675 Evaluation. Section 1 General. 1.5 Referenced Publications. 1.1 Scope. 1.6 Unit Conversion. 1.2 Alternative Designs
API 675 Evaluation Evaluation of Pumps for Conformity to the Requirements of API Standard 675: Positive Displacement Pumps Controlled Volume. Second Edition, October 1994 Section 1 General 1.1 Scope API
More informationINTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS STANDARD FOR BACKFLOW PREVENTERS AND RELIEF VALVES IAPMO TS
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS STANDARD FOR BACKFLOW PREVENTERS AND RELIEF VALVES IAPMO TS 8-20069 1. PURPOSE 1.1 The purpose of this standard is to establish an acceptable
More informationPUSH-BUTTON SERIES SELF-CLEANING LIP LUG DESIGN CLOSED BUMPER BLOCKS
PUSH-BUTTON SERIES EDGE MOUNT HYDRAULIC DOCKLEVELER SELF-CLEANING LIP LUG DESIGN Self Cleaning Lug Style Lip Hinge Zinc Plated Deck & Lip Rods Available Deck Widths 66, 72, 78, 83 Available Capacities:
More informationRed Dot. Rigid Fittings. Table of Contents
Table of Contents Conduit Unions Hazardous Locations... C2 C3 Conduit Fittings Hazardous Locations... C4 C5 Sealing Fittings Hazardous Locations... C6 C7 Conduit Hubs Raintight for Threaded Rigid Conduits...
More informationNew Large Diameter Drilling Solution with a Quick Change Tip and Indexable Inserts
Diameters (All with Inch Shanks) Inch: 1.032" - 1.781" (every 1/32") Metric: 26.0mm - 45.0mm (every 1mm) Bodies Inch Weldon Shanks Metric Shanks Available Upon Request Length/Diameter Ratio 5xD Tip Geometry
More informationBall Float Steam Trap UNA 45, UNA 46, UNA 46A PN 40/Class 300 DN 15, 20, 25, 40, 50, 65
Data Sheet 819345-02 Issue Date: 06/16 all Float Steam Trap UNA 45, UNA 46, UNA 46A PN 40/Class 300, 20, 25, 40, 50, 65 UNA 45 hl, UNA 46 hl, UNA 46A hl UNA 45 hl UNA 45 hl Description Float traps type
More informationYoungstown State University
SECTION 260533 - RACEWAYS PART 1 - GENERAL SUMMARY A. This section includes raceways for electrical wiring. Types of raceways in this section include the following: 1. Flexible metal conduit 2. Liquid
More informationSuper Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1
76K-100-A SERIES Super Duplex Stainless Steel Ball Valve with Mounting Pad 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service
More information2013 by KVT-KOENIG GROUP >
CATALOG 2014 2013 by KVT-KOENIG GROUP > www.kvt-koenig.com KVT - KOENIG GROUP SFC KOENIG is an internationally wellknown specialist for high-quality sealing and flow control applications. In all areas,
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More information