Amphenol. 602 GB Series CE19

Transcription

1 602 GB Series CE19 High temperature Miniature Bayonet Lock Connectors with rear insertable, rear release crimp contacts. Connectors to EL 21 Patt. 602 DEF STAN & PAN & -4. Amphenol 1

2 Amphenol 602 GB Series Connectors to EL 21 Patt. 602 DEF STAN & PAN & -4 The specifications herein are given only for the guidance of trade customers. The company's policy is one of continual development and improvement of its products and accordingly the company reserve the right at any time to alter such specifications without notice. No information contained herein is intended to constitute an offer of sale or reply and each prospective customer of any product should satisfy himself before purchase that the product is suitable for his requirements. While the information in this catalogue is restricted to standard connectors in accordance with published military and national specifications, Amphenol have developed, and have under development, a number of 602 series products for special applications. If you cannot find a product in this catalogue to suit your requirements please do not hesitate to get in touch with the factory for the latest information on new product developments. 602GB connectors are high performance environmental circular connectors for the most demanding requirements of civil and military applications. Operating from -65 C to +0 C: resisting solvents and fluids likely to be encountered including heavy salt spray in ship-borne aircraft: and finally meeting the exhaustive climatic proving of BS 2G0 Part 2 Class 1. They are directly compatible with connectors to MIL-C-2642 Series 2, which supersedes MIL-C-3723 Series 1. Derating When connectors to different specifications are intermated (e.g. Pattern 602 and MIL-C-2642 Series 11, the combination must not be operated under conditions more severe than the less stringent clause of either specification. 1

3 Contents Construction details...3 Specification requirements...4 Shell styles and polarisation availability...5 Insert orientations...6 Key, Keyway orientations...7 Insert availability... Ordering details, Amphenol part numbers...9 Ordering details, Panavia part numbers...9 Ordering details, Pattern 602 numbers... Flange mounting receptacle... Dummy receptacle... Single hole mounting receptacle...13 Single hole mounting receptacles with solder/pintail contacts...13 Caps and chains... Hermetic receptacles, single hole and solder mounting...15 Hermetic receptacle, flange mounting.... Cable Accessories...17 & Plugs ribbed and standard coupling...11 Flange mounting receptacle with solder/pintail contacts...11 Other Circular Connector Series 62GB solder miniature bayonet lock connectors A range of 62GB connectors are qualified to BS 95 F001 7, DEF STAN (Part 1) Sec. 3 Patt. 5 and MIL-C-2642E. 2GB crimp miniature bayonet lock connectors 2GB connectors are designed to qualify to BS 95 N0001, the successor to DEF (prov ) Patt GB connectors are qualified to BS 95 F003. Merlin I 1 Series high performance miniature bayonet lock connectors The series features a rear insertable, rear release individual contact retention system with a single piece dielectric The series are qualified to MIL-C-3723 Series 1 and MIL-C-2642 Series II. Operating temperature range is -55 C to +0 C. Merlin II 4 Series high performance miniature bayonet lock connectors High density miniature circular connectors sharing the polymeric ICR system of other Amphenol Merlin devices Available in 50% and 0% no scoop versions to MIL-C-3999 and complying with European specifications LN and UTE C 93/4 Model HE306. Merlin III 5 Series high performance miniature bayonet lock connectors The series also benefits from a one piece all dielectric ICR system reducing connector parts from 2 to in the -6 and -61 configurations. There is also a marked increase in contact dielectric separation. Qualified to MIL-C and MIL-C-3723 Series III. EMI/RFI/EMP filter connectors 42 Series miniature bayonet lock connectors Amphenol's EMI filtering connectors provide the efficiency of a built-in filter with the reliability of a high performance miniature connector and the advantages of crimp poke-home contacts. The connectors are electrically and environmentally comparable with connectors to DEF STAN (Part. 1 ) Sec 3 Patt. 5, MIL-C-2642 and BS 95 N0001 the successor to DEF (prov.) Patt, Series miniature screw coupling or bayonet lock connectors 4 Series connectors meet or exceed the requirements of MIL-C and MIL-C The connectors are sealed against extreme environments and utilise front release, rear insertable Poke Home Contacts. 34 Series high density connectors Sub-miniature general purpose connectors to MIL-C utilising a single piece dielectric retention system. Basic constructions available are 50% and 0% scoop-proof. 97 Series standard screw coupling MS connectors 97 Series connectors are Amphenol's exclusive A and B construction to MIL-C-5015 and supersede the original AN range. Hermetic seal connectors Amphenol one piece glass to metal receptacles with pin contacts are available in a range of styles in Series 62GB , 2 Series. Facilities available for customers' special designs. Cables assemblies Amphenol is fully equipped to undertake the preparation of all types of cable assemblies complying with the military vehicles and engineering establishments and fighting vehicles requirements of the Ministry of Defence - the Ministry of Environment (Motorways) for motorway control equipment - the Post Office Manufacturing code and to the British Standards Institute when applicable to Cable systems. Control procedures carried out in accordance with MIN DEF Approval numbers BS 9000, 43/M and CAA. DIA/5754/5. Moulded terminations form a specialised service by the company. The process offers such advantages as a waterproof seal between cable and connector back-end, mechanical protection, and a homogeneous joint between moulding and cable. 2

4 Construction Connector shells are machined from solid aluminium bar stock, not forged or extruded. Machining has inherent advantages in terms of strength and adaptability. 602GB connectors can be supplied in materials other than aluminium. The normal shell finish used, which has a high resistance to corrosion, is cadmium plating with an olive drab chromate treatment. Other finishes may be supplied. For nonstandard materials or finishes consult factory for availability. Hard dielectric insert components are glass filled epoxy, rubber components are silicone or fluorosllicone. The connectors have gold plated contacts with crimp terminations. Pintail or solder bucket terminations are available in sealed (low profile) and Hermetic receptacles. Sealed (Low Profile) receptacles have a maximum leakage of 1 cc/ per hour at 1 atmosphere. Hermetic connectors with glass dielectric are manufactured with mild steel shells plated in tin over nickel and gold plated nickel alloy contacts. Passivated stainless steel shells also available. Configurations for size contacts range between 3 contacts in the size,.7mm (0.5in. diameter) shell up to a maximum of 61 contacts in the size, 36.1 mm (1.5in. diameter) shell. Intermediate sizes and contact data for heavier current ratings are shown in the insert availability chart on page. 1. Fluorosilicone fluid resistant sealing. 2 Closed entry hard front socket insert. 3. Triple track positive bayonet locking with visual mating indication. 4. Interfacial mating seal. 5. Triple riser wire sealing key shell polarisation. 7. Peripheral shell seal.. Precision formed metal clip retention system. 9. Cadmium finish shells with high resistance to corrosion and temperature. Design, development and manufacture of 602GB connectors have all been carried our in the United Kingdom by Amphenol Limited 3

5 602GB Series EL21 Patt.602 Specification Requirements Engagement & disengagement forces Contact resistance insulation resistance Shell continuity Contact retention Sealing Fluid resistance Torque measurements for mating and unmating range from Nm ( lb in) to 4.29 Nm (3 lb in). As per test in EL21 and EL2113. Maximum 2.5m.Ω environmental styles, 5mΩ hermetic styles. Not less than 5000 megohms. Less than 5 millivolts for aluminium shells, less than millivolts if one shell is ferrous. (At 1A). Will withstand a load of 66. N (15 lbf) on a size contact. 9.0 N ( Ibf) on a size contact. With a movement of less than.015". At a pressure of 15 p.s.i. maximum leakage 1 c.c./hr. for fixed contact (low profile) environmental styles and 0.01 micron/cub.ft./hr. hermetic styles. Meets requirements of EL21 after immersion in aircraft fuels, turbine lubricants and hydraulic fluids. Voltage proof Vibration Thermal shock resistance High temperature endurance Mechanical endurance Climatic Fungus growth Acceleration Insert retention Salt spray 700V peak applied for one minute at low air pressure 44mbar (70,000 ft). Unaffected by vibration tests detailed in BS 2G 0, Part 2, Grade A. Unaffected by rapid temperature cycling between +5 C and -65 C. Insulation resistance better than 0 megohms after 1,000 hours at 0 o C. 500 matings and unmatings minimum. No voltage breakdown after the climatic test detailed in BS 2G 0 Part 2 for Class 1 equipment. Service unaffected by tests detailed in BS 2G 0 Part 2 for Class 1 connectors. Performance unaffected after acceleration and crash landing test detailed in BS 2G 0 Part 2 for Class 1A equipment. Insert secure against rotation and also axial loads of 334N (75 lbf). Service unaffected by spray test detailed in EL21. 4

6 Table of Shell Styles PLUG (Standard Coupling Ring) Page 11 PLUG (Ribbed Coupling Ring) Page 11 GROUNDED PLUG (Standard Coupling Ring) Page 11 FLANGE MOUNTING HERMETIC RECEPTACLE Page SINGLE HOLE MOUNTING HERMETIC RECEPTACLE Page 15 SOLDER MOUNTING HERMETIC RECEPTACLE Page 15 PAN F & 4F PAN T PAN U PAN E E E - 06EG - 02H 6027H - 07H 6021H - 01H FLANGE MOUNTING RECEPTACLE Page SINGLE HOLE MOUNTING RECEPTACLE Page 13 GROUNDED PLUG (Ribbed Coupling Ring) Page 11 DUMMY RECEPTACLE Page FLANGE MOUNTING RECEPTACLE Page 11 SINGLE HOLE MOUNTING RECEPTACLE Page 13 PAN 6432-IB & 4B PAN A & -4A PAN R -02A (219) (219) 60-00E E - 05EG A Hermetic receptacles are available with pin tail terminations by adding deviation (345) to the Amphenol Part Number. Polarisation Availability For orientations not shown above consult factory * Inserts and orientations in PAN Inserts and orientations in PAN These polarisations are not included in EL21 Pattern 602 but are available as Amphenol proprietory part numbers. 5

7 Insert Orientations Normal position with pin contacts Alternative position of insert with socket contacts ( counter clockwise) Each diagram shows mating face of insert Alternate position of insert with pin contacts ( clockwise) Orientation (degrees) Insert arrangement Normal W X Y Z

8 Key/Keyway Orientations Datum is always taken from major key or keyway. In receptacles the major keyway always remains fixed in relation to the mounting flange. For the B,C,E and F orientations, the three bayonet locations and associated minor keyways are rotated complete, in accordance with the table below. N.B. - The accompanying diagram shows a receptacle shell, with keyways. Corresponding key orientations for a mating plug shell are therefore always clockwise. Shell VALUES FOR α (degrees) VALUES FOR θ (degrees) VALUES FOR β (degrees) Size N B C E F N B C E F N B C E F VALUES FOR ϕ (degrees) VALUES FOR ω (degrees) Shell ORIENTATION ORIENTATION Size N B C E F N B C E F

9 Inset Availability VOLTAGE RATING 1 RATING 1 RECOMMENDED TEST ALTITUDE WORKING VOLTAGE VOLTAGE a.c. a.c. r.m.s. r.m.s. Sea Level 600 1,500 15,000 metres ,000 metres ,000 metres VOLTAGE RATING 2 RATING 2 RECOMMENDED TEST ALTITUDE WORKING VOLTAGE VOLTAGE a.c. a.c. r.m.s. r.m.s. Sea Level 1,000 2,300 15,000 metres ,000 metres ,000 metres CURRENT RATING The performance of 602 Series connectors at all limes exceeds the maximum continuous bunched rating, of the appropriate temperature rating and size of wire or cable. This bunched rating is therefore the determining factor. In the case of mixed loadings, the greatest individual load shall be the bunched loading. In any combination of ambient temperature plus temperature rise due to current flow through the contacts the maximum temperature of 0 C shall not be exceeded. Contact characters are shown for identification purposes only. Every effort is made to ensure accuracy but actual connectors should be inspected to ensure actual position of characters. If in doubt consult nearest sales office. Contact loading should not exceed:- Size Contacts 7.5A Size Contacts 15A Size Contacts 25A

10

11 Ordering by Pattern 602 Numbers All connectors containing size contacts must have a Strain Relief Accessory fitted to maintain the stated environmental performances. To ensure the best performance of the wire sealing grommet it is recommended that this type of accessory should be fitted to all connectors. See page 17 for part numbers. For latest part numbers qualified to Patt. 602 please consult your nearest Sales Office. Connectors ordered against Patt. 602 numbers (as above) will be supplied in compliance with EL 21 Patt. 602 requirements, this is a basic connector with the exact complement of contacts which comply with EL2113. This is identical to AMPHENOL Condition. Amphenol Conditions and Deviations Where connectors to Pattern 602 or 602GB number systems are required 'to be supplied' with accessories, or to other special requirements, the appropriate Amphenol Condition for Pattern 602 or Deviation for 602GB, as shown below, should always be quoted. e.g PN Amphenol Cond 2 or 602GB-OOE -32P (309). Amphenol Condition 1 Plugs and Sockets supplied against this condition will be supplied without cable accessories but complete with contacts (including spares), and filler plugs. Amphenol Condition 2 (Deviation 309) Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a cable accessory without strain relief to MS34. Amphenol Condition 3 (Deviation 3) Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a straight backshell cable accessory with Cable Tie strain relief to MS Amphenol Condition 4 (Deviation 311) Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a 90 cable accessory with Cable Tie to MS3154 Amphenol Condition 5 (Deviation 326) Plugs and Sockets supplied against this condition will be supplied Amphenol Condition 1 but with adaptor for heat shrink boot to MS 315. Amphenol Condition 6 (Deviation 335) Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a straight cable accessory with saddle clamp to MS 3417 Amphenol Condition 7 (Deviation 336) Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a 90 cable accessory with saddle clamp to MS 34. Amphenol Condition (Deviation 341) Plugs and Sockets supplied against basic 60, 6026, 6027 reference numbers will be supplied with the exact complement of contacts but without seal plugs, tools and accessories. Amphenol Condition 9 (Deviation 301) Plugs and Sockets supplied against this condition will be without contacts, seal plugs, tools and accessories. Deviation (219) Receptacles only, film wire terminations. Deviation (345) Hermetic receptacles only, pintail terminations.

12 Ribbed Coupling Ring Plug - 05E 65 (To RRE P 50753) Grounded Plug 05EG Shell Size C1 Max. Dia. C2 max. Dia. G ± 0.76 (±.030) H max. L Thd UNEF 2A (0.72) (0.92) (0.0) (1.230) (0.926) (1.017) (0.0) (1.230) (1.043) (1.2) (0.0) (1.230) (1.3) (1.267) (0.0) (1.230) (1.305) (1.454) (0.0) 0.230) (1.391) (1.563) (0.0) (1.230) (1.531) (1.67) (0.0) (1.230) (1.656) (1.797) (0.0) (1.230) (1.777) (1.9) (0.0) (1.230) ½ - 5 / - ¾ - 7 / / / / / - Standard Plug -06E 6026 PAN F PAN F Grounded Plug 06EG Flange Mtg. Receptacle -02A Sealed ( Low Profile) with Solder bucket terminations - 02A (219) Sealed ( Low Profile) with pintail terminations. D dia. M N X sq. Shell B C ± 0.05 E G1 G2 Dia. Dia. P ± 0.13 Size Max. Sq max (±0.002) Max. Max. Max. Max. Max. Max (±.005) (0.461) (0.2) (0.5) (0.077) (0.41) (0.4) (0.474) (0.49) (0.07) (0.594) (0.461) (0.954) (0.5) (0.077) (0.41) (0.4) (0.591) (0.6) (0.07) (0.719) (0.461) (1.047) (0.5) (0.077) (0.41) (0.4) (0.751) (0.739) (0.07) (0.) (0.461) (1.1) (0.5) (0.077) (0.41) (0.4) (0.76) (0.64) (0.07) (0.906) (0.461) (1.234) (0.5) (0.077) (0.41) (0.4) (1.001) (0.99) (0.07) (0.969) (0.461) (1.32) (0.5) (0.077) (0.41) (0.4) (1.6) (1.050) (0.07) (1.062) (0.566) (1.453) (0.5) (0.02) (0.37) (0.377) (1.251) (1.175) (0.2) (1.156) (0.566) (1.57) (0.5) (0.02) (0.37) (0.377) (1.376) (1.300) (0.2) (1.250) (0.595) (1.703) (0.152) (0.02) (0.406) (0.343) (1.501) (1.425) (0.2) (1.375) NOTE:- For panel piercing dimensions see type -00E (page ). Dimensions: mm - bold type: inches - light type in brackets throughout unless otherwise stated * for other Pintail lengths consult factory. 11

13 Flange Mtg. Receptacle - 00E 60 PAN B PAN B Dummy Receptacle - PAN 6432-IR Ordering Details 602GB--XX or PAN R-XX replace XX by shell size required e.g. 602GB-- or PAN R-. Shell Size B1 ± 0.3 (±.015) B2 ± 0.25 (±.0) C Sq max. D1 dia. ± 0.05 (±.002) D2 dia (+.005) E ± 0.41 (±.0) F max. G ± 0.76 (±.030) (0.446) (0.477) (0.2) (0.5) (0.) (0.062) (1.215) (0.0) (0.446) (0.477) (0.954) (0.5) (0.) (0.062) (1.215) (0.0) (0.446) (0.477) (1.047) (0.5) (0.) (0.062) (1.215) (0.0) (0.446) (0.477) (1.1) (0.5) (0.) (0.062) (1.215) (0.0) (0.446) (0.477) (1.234) (0.5) (0.) (0.062) (1.215) (0.0) (0.446) (0.477) (1.32) (0.5) (0.) (0.062) (1.215) (0.0) (0.571) (0.571) (1.453) (0.5) (0.) (0.094) (1.275) (0.0) (0.571 ) (0.571) (1.57) (0.5) (0.) (0.094) (1.275) (0.0) (0.605) (0.605) (1.703) (0.152) (0.155) (0.094) (1.275) (0.0) L Thd UNEF 2A ½ - 5 / ¾ - 7 / / 1 3 / 1 5 / 1 7 / - Shell M1 M2 Panel Thickness W dia. X sq Size Dia. Dia. P1 P2 P3 V ± 0.13 ± 0.13 Max. max. max. max. max. min. ( ±.005) (±.005) (0.474) (0.499) (0.5) (0.07) (0.5) (0.930) (0.56) (0.594) (0.591) (0.625) (0.5) (0.07) (0.5) (1.055) (0.65) (0.719) (0.751) (0.750) (0.5) (0.07) (0.5) (1.0) (0.64) (0.) (0.76) (0.75) (0.5) (0.07) (0.5) (1.305) (0.99) (0.906) (1.001) (1.000) (0.5) (0.07) (0.5) (1.490) (1.113) (0.969) (1.6) (1.062) (0.5) (0.07) (0.5) (1.600) (1.23) (1.062) (1.251) (1.7) (0.5) (0.2) (0.2) (1.725) (1.363) (1.156) (1.376) (1.3) (0.5) (0.2) (0.2) (1.35) (1.4) (1.250) (1.501) (1.437) (0.5) (0.2) (0.2) (1.960) (1.615) (1.375)

14 Single Hole Mtg.Receptacle -07E 6027 PAN A PAN A Shell B D E F G K A/F L Thd M P Panel V W dia. Z 1 ±0.13 Size max. Sq. max. max. ± 0.76 max. UNEF 2A Max. thickness min. ± 0.13 (±.005) (±.005) (±.030) dia. max. min. (±.005) ½ - (0.707) (0.954) (0.113) (1.215) (0.0) (0.767) (0.474) (0.7) (0.062) (0.990) (0.572) (0.525) (0.536) / (0.707) (1.07) (0.113) (1.215) (0.0) (0.92) (0.591) (0.7) (0.067) (1.115) (0.697) (0.650) (0.661) ¾ - (0.707) (1.266) (0.113) (1.215) (0.0) (1.079) (0.751) (0.7) (0.062) (1.305) (0.95) (0.13) (0.) / (0.707) (1.391) (0.113) (1.215) (0.0) (1.5) (0.76) (0.7) (0.062) (1.430) (1.0) (0.937) (0.94) (0.707) (1.5) (0.113) (1.215) (0.0) (1.329) (1.001) (0.7) (0.062) (1.570) (1.135) (1.061) (1.072) / (0.707) (1.641) (0.113) (1.215) (0.0) (1.455) (1.6) (0.7) (0.062) (1.7) (1.260) (1.6) (1.197) / (0.772) (1.2) (0.) (1.275) (0.0) (1.579) (1.251) (0.250) (0.062) (1.65) (1.35) (1.311) (1.3) / (0.772) (1.954) (0.) (1.275) (0.0) (1.705) (1.376) (0.250) (0.062) (2.005) (1.5) (1.436) (1.447) / (0.772) (2.07) (0.) (1.275) (0.0) (1.29) (1.501) (0.219) (0.062) (2.150) (1.635) (1.561) (1.572) Z 2 ±0.13 Single Hole Mtg.Receptacle -002 Sealed (Low Profile) with Solder Bucket Terminations * (219) Sealed (Low Profile) with Pintail Terminations * P Panel Shell B C Dia. D G M Max thickness ± 0.13 Size Max. Max Max. Mex. dia. Max. min. (±.005) (0.697) (0.9) (0.72) (0.294) (0.474) (0.7) (0.062) (0.525) (0.697) (1.041) (1.0) (0.294) (0.591) (0.7) (0.062) (0.650) (0.697) (1.) (1.232) (0.294) (0.751) (0.7) (0.062) (0.13) (0.697) (1.353) (1.377) (0.294) (0.76) (0.7) (0.062) (0.937) (0.697) (1.47) (1.521) (0.294) (1.001) (0.7) (0.062) (1.061) (0.697) (1.603) (1.666) (0.294) (1.6) (0.7) (0.062) (1.6) (0.75) (1.791) (1.) (0.323) (1.251) (0.250) (0.062) (1.311) (0.75) (1.9) (0.954) (0.323) (1.376) (0.250) (0.062) (1.436) (0.75) (2.041) (2.099) (0.323) (1.501) (0.219) (0.062) (1.561) NOTE:- For panel piercing dimensions see style -07E. *Order by part numbers 602GB-5002-XX-XXXX or 602GB-5002-XX- XXXX (219). Replace XX-XXXX by insert arrangement, contact style and orientation require. *For other Pintail lengths consult factory. 13

15 Caps & Chains 62GB Series caps and chains are common to 602GB and 62GB Series To fit Amphenol Part No. Panavia No. To fit Amphenol Part No. Single hole fixing receptacles 62GB to PAN MA-0 to Single hole fixing 62GB to Flange mounting receptacles 62GB-73-0 to PAN MB-0 to receptacles To fit Amphenol Part No. Panavia No. To fit Amphenol Part No. Plugs 602GB-9-0 to not suitable for use with 62GB series. PAN MF-0 to Plugs 602GB to NOTE: For caps and cords refer to our 62GB catalogue (max temperature 5 C ) Shell Size A1 max..76 (0.660).76 (0.660).76 (0.660).76 (0 660).76 (0.660).76 (0 660).29 (0.7).29 (0.7) 19. (0.755) A2 max..64 (0.655).64 (0.655).64 (0.655).64 (0 655).64 (0.655).64 (0.655).64 (0.655).64 (0.655) (0.690) C1 Dia. max..26 (0.719) (0.44) (1.000) 2.57 (1.5) (1.250) (1.375) 3. (1.500) (1.625) (1.750) C2 Dia. max..64 (0.734) 21.2 (0.59) (1.000) 2.57 (1.5) (1.250) (1.375) 3. (1.500) (0.625) (1.750) C3 Dia. Max..65 (0.92) 25.3 (1.017) (1.2) 32. (1.267) (1.454) (1.563) 42.4 (1.67) (1.797) 4.1 (1.9) d (+.0) (-.005) 3. (0.5) 3. (0.5) 3. (0.5) 3. (0.5) 3. (0.5) 3. (0.5) 3. (0.5) 3. (0.5) 3.73 (0.7) d (+.0).6 (0.57) 17.6 (0.703).63 (0.91) 25.1 (1.0) 2.9 (1.1) 32. (1.266) (1 391) 3.50 (1.5) 41.6 (1.641) F approx (3.000) (3.000) 9.00 (3.500) 9.00 (3.500) 9.00 (3.500) 9.00 (3.500) 2.00 (4.000) 2.00 (4.000) 2.00 (4.000)

16 Single Hole Mtg. Hermetic Seal Receptacle -07H 6027H Shell A B D sq. G max. K L Thd Size max max max contact contact A/F UNEF 2A PAN U Size Size max (0.) (0.707) (0.954) (0.134) (0.4) (0.767) (0.) (0.707) (1.07) (0.134) (0.4) (0.92) (0.) (0.707) (1.266) (0.134) (0.4) (1.079) (0.) (0.707) (1.391) (0.134) (0.4) (1.5) (0.) (0.707) (1.5) (0.134) (0.4) (1.329) (0.) (0.707) (1.641) (0.134) (0.4) (1.455) (0.9) (0.772) (1.2) (0.099) (0.9) (1.579) (0.9) (0.772) (1.954) (0.099) (0.9) (1.705) (0.951) (0.03) (2.07) (0.099) (0.9) (1.29) 9 / 11 / 7 / / 1 ¼ / - 1 ½ / - Shell M P Panel V W Z Z1 Size Dia. thickness min. ±0.13 ±0.13 ±0.13 max. max. min. (±.005) (±.005) (±.005) (0.474) (0.7) (0.062) (0.990) (0.572) (0.525) (0.536) (0.591) (0.7) (0.062) (1.115) (0.697) (0.650) (0.661) (0.751) (0.7) (0.062) (1.305) (0.95) (0.13) (0.) (0.76) (0.7) (0.062) (1.430) (1.0) (0.937) (0.94) (1.001) (0.7) (0.062) (1.570) (1.135) (1.061) (1 072) (1.6) (0.7) (0.062) (1.7) (1.260) (1.6) (1.197) (1.251) (0.250) (0.062) (1.65) (1.35) (1.311) (1.3) (1.376) (0.250) (0.062) (2.005) (1.5) (1.436) (1.447) (1.501) (0.250) (0.062) (2.150) (1.635) (1.561) (1.572) Solder Mtg. Hermetic Seal Receptacle - 01H 6021 H PAN E Shell A C G max. H M N V W Dia. Size max. max. contact contact max. max. max. min. ±0.13 Dia. Size Size Dia. Dia. (±.005) (0.01) (0.635) (0.17) (0.) (0.156) (0.474) (0.563) (0.930) (0.570) (0.01) (0.760) (0.17) (0.) (0.156) (0.591) (0.673) (1.055) (0.60) (0.01) (0.54) (0.17) (0.) (0.156) (0.751) (0.72) (1.0) (0.79) (0.01) (0.979) (0.17) (0.) (0.156) (0.76) (0.907) (1.305) (0.9) (0.01) (1.4) (0.17) (0.) (0.156) (1.001) (1.032) (1.490) (1.039) (0.01) (1.) (0.17) (0.) (0.156) (1.6) (1.157) (1.600) (1.4) (0.63) (1.3) (0.17) (0.) (0.156) (1.251) (1.251) (1.725) (1.25) (0.95) (1.44) (0.6) (0.2) (0.) (1.376) (1.376) (1.35) (1.33) (0.95) (1.574) (0.6) (0.2) (0.) (1.501) (1.501) (1.960) (1.50) For pin tail termination contacts in hermetic connectors add deviation (345) to the Amphenol Part Number. 15

17 Flange Mtg. Hermetic Seal Receptacle - 02H PAN T Shell Size 27 A B C d 1 Dia. d 2 E G max. max. ±0.25 Sq. ±0.05 ±0.13 ±0.41 contact contact (±.0) max. (±.002) (±.005) (±.0) Size Size (0.01) (0.5) (0.2) (0.0) (0.) (0.062) (0.17) (0.) (0.01) (0.5) (0.954) (0.0) (0.) (0.062) (0.17) (0.) (0.01) (0.5) (1.047) (1.0) (0.) (0.062) (0.17) (0.) (0.01) (0.5) (1.1) (0.0) (0.) (0.062) (0.17) (0.) (0.01) (0.5) (1.234) (0.0) (0.) (0.062) (0.17) (0.) (0.01) (0.5) (1.32) (0.0) (0.) (0.062) (0.17) (0.) (0.63) (0.650) (1.453) (0.0) (0.) (0.094) (0.17) (0.) (0.95) (0.650) (1.57) (0.0) (0.) (0 094) (0.6) (0.2) (0.05) (0.650) (1.703) (0.7) (0.155) (0.094) (0.6) (0.2) Shell H M N P max. V W dia. X sq. Size max. Dia. Dia. Panel min max max Thickness (+.005) (+.005) (0.5) (0.474) (0.563) (0.07) (0.930) (0.56) (0.594) (0.5) (0.591) (0.673) (0.07) (1.055) (0.65) (0.719) (0.5) (0.751) (0.72) (0.07) (1.0) (0.64) (0.) (0.5) (0.76) (0.907) (0.07) (1.305) (0.99) (0.906) (0.5) (1.001) (1.032) (0.07) (1.490) (1.113) (0.969) (0.5) (1.6) (1.157) (0.07) (1.600) (1.23) (1.062) (0.093) (1.251) (1.251) (0.2) (1.725) (1.363) (1.156) (0.5) (1.376) (1.376) (0.2) (1.35) (1.4) (1.250) (0.5) (1.501) (1.501) (0.2) (1.960) (1.615) (1.375) For pin tail termination contacts in hermetic connectors add deviation (345) to the Amphenol Part Number.

18 Cable Accessories To ensure the best performance of the connector wire sealing grommet it is recommended that a Strain Relief Accessory should be fitted. See ordering information on pages 9 &. With Straight Strain Relief Saddle Clamp. For ordering as a separate item 602GB-19-XX replace XX by shell size required e.g. 602GB-19-. With 90 Strain Relief Saddle Clamp. For ordering as a separate item 602GB-199-XX replace XX by shell size required e.g. 602GB-199- With Straight Strain Relief Clamp. For ordering as a separate item 602GB-9-XX or PAN D-XX replace XX by shell size required e.g. 602GB-9-0 or PAN D-0. With 90 o Strain Relief Clamp. For ordering as a separate item 602GB-133-XX or PAN K-XX replace XX by shell size required e.g. 602GB or PAN K-OE. Spacer pad for Cable tie type strain relief clamps 602GB-1 Grommet nut assembly for heat shrink boot 602GB-0-XX replace XX by shell size required e.g. 602GB-0-0. Grommet nut Without Strain Relief For ordering as a separate item 602GB-7-XX or PAN C-XX replace XX by shell size required. e.g. 602GB-7-0 or PAN C-0. RFI Adaptor for heat shrink boot 602GB-25-XX for use with 06EG and 05EG plugs. Note: As part no. depends on cable being used please consult factory for details. Note: For cable accessory dimensions see tables on following page. 17

19 Cable Accessories RESILIENT BUSH These bushes are for use with saddle clamp type strain relief clamps but are not included with these accessories and if required must be ordered separately. 602GB-5-XX or PAN H-XX replace XX by shell size required. e.g. 602GB-5- or PAN H-. Shell F 1 max. when F 2 max. when F 3 max. when F 4 max. when F 5 max. when F 6 max. when M Size fitted to fitted to fitted to fitted to fitted to fitted to dia Plug Recept. Plug Recept. Plug Recept. Plug Recept. Plug Recept. Plug Recept. max (1.9) (1.901) (2.065) (2.050) (1.715) (1.700) (2.157) (2.139) (1.507) (1.492) (2.092) (2.077) (0.617) (2.026) (2.011) (2.7) (2.132) (1.175) (1.700) (2.157) (2.139) (1.507) (1.492) (2.092) (2.077) (0.734) (2.151) (2.136) (2.340) (2.325) (1.175) (1.700) (2.217) (2.199) (1.507) (1.492) (2.092) (2.077) (0.5) (2.151) (2.136) (2.400) (2.35) (1.175) (1.700) (2.37) (2.369) (1.507) (1.492) (2.092) (2.077) (0.94) (2.270) (2.261) (2.549) (2.534) (1.175) (1.700) (2.37) (2.369) (1.507) (1.492) (2.092) (2.077) (1.1) (2.526) (2.511) (2.661) (2.646) (1.740) (1.700) (2.467) (2.449) (1.507) (1.492) (2.092) (2.077) (1.2) (2.651) (2.696) (2.76) (2.31) (1.740) (1.75) (2.597) (2.639) (1.507) (1.552) (2.092) (2.077) (1.345) (2.776) (2.21) (2.911) (2.956) (1.740) (1.75) (2.717) (2.759) (1.071) (1.552) (2.092) (2.077) (1.46) (2.901) (2.946) (3.036) (3.01) (1.740) (1.75) (2.47) (2.9) (1.507) (1.552) (2.092) (2.077) (1.593) Shell N 1 N 2 N 3 N 4 N 5 N 6 S 1 S 2 T 1 T 2 T 3 U Size max. max. max. max. max. Max. Cable Entry dia. max. dia. dia. max. Open Closed max. max. max (0.952) (1.1) (0.751) (1.190) (0.540) (1.5) (0.4) (0.5) (0.260) (0.752) (0.657) (0.617) (1.2) (1.062) (1.3) (0.751) (1.190) (0.540) (1.5) (0.26) (0.7) (0.365) (0.32) (0.72) (0.734) (1.2) (1.7) (1.376) (0.751) (1.250) (0.540) (1.5) (0.4) (0.291) (0.501) (0.9) (0.937) (0.5) (1.6) (1.7) (1.436) (0.751) (1.4) (0.540) (1.5) (0.476) (0.351) (0.575) (1.046) (1.050) (0.94) (1.660) (1.3) (1.55) (0.751) (1.4) (0.540) (1.5) (0.625) (0. 501) (0.700) (1.319) (1.239) (1.1) (1.7) (1.562) (1.697) (0.776) (1.500) (0.540) (1.5) (0.706) (0.5) (0.779) (1.451) (1.37) (1.2) (1.7) (1.67) (1.) (0.776) (1.630) (0.540) (1.5) (0.31) (0.51) (0.904) (1.557) (1.500) (1.345) (1.790) (1.) (1.947) (0.776) (1.750) (0.540) (1.5) (0.956) (0.644) (1.029) (1.653) (1.631) (1.46) (1.50) (1.937) (2.072) (0.776) (1.0) (0.540) (1.5) (1.01) (0.706) (1.4) (1.775) (1.750) (1.593) (1.9)

20

21 Amphenol Limited HOW TO REMOVE CONTACTS A. Remove wire support, if used, and slide back on wire bundle. B. Snap white end of appropriate insertion/extraction C. Press the wire of the contact to be removed against tool over the wire of the contact to be removed. the serrations of the plastic tool and pull both the Slide tool along wire into the insert cavity until it tool and the contact wire assembly out of the connector. engages the contact rear and a positive resistance is felt. At this time, the contact retaining clip is in the unlocked position. Contact Size Colour Code Contact Part Number AWG Suitable Wire Size mm inches Insulation O.D. for grommet sealing mm inches Seal Plug Part Nos and additional contact data Red Red/Black Black Blue Blue/Red Yellow Yellow/Blue Yellow/Red Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB Pin 602GB Skt 602GB ,, 26, 2, 30,,,,,,,,,,,,,, Seal Plug 602GB Reduced Crimp Barrel for 26, 2, 30 AWG Extended Crimp Barrel length Seal Plug 602GB Reduced Crimp Barrel for,, AWG Extended Crimp Barrel Length Seal Plug 602GB Reduced Crimp Barrel for,, AWG Reduced Crimp Barrel For,, AWG Extended Crimp Barrel Length Use seal plug to ensure proper connector whenever all contacts are not employed. For ease of removal, leave end bell portions exposed. Removal of unwired contacts: Remove contact with MS tool by referring to instruction enclosed with tool. RECOMMENDED TORQUE Shell Size Single Hole Fixing Receptacles Nm Ibf.ins Accessories Nm Ibf.ins