Appendix 1 List of Newly Established and Revised JIS Publicly Notified on March 20, 2018
|
|
- Roderick McKenzie
- 6 years ago
- Views:
Transcription
1 Appendix 1 List of Newly Established and Revised JIS Publicly Notified on March 20, 2018 < in charge and telephone number> (direct line: ) (direct line: ) 1. Newly established standards Name of standard Micro O-rings - Part1:Dimensions,sizes and measuring methods Systems and software engineering-content management for product life-cycle, user and service management documentation Geometrical product specifications (GPS)-Filtration-Linear areal filters-gaussian filters Geometrical product specifications (GPS)-Surface texture: Areal-Part 2: Terms, definitions and surface texture parameters Optics and photonics-optical materials and components- Characterization of optical materials used in the infrared spectral range from 0.78 μm to 25 μm Test methods for telescopic systems Part7:Test methods for limit of resolution that B Japanese Standards X0154 Information Processing Society of Japan B0635 Japanese Standards B Japanese Standards B7075 Japan Optical Glass B Japan Telescope in charge
2 Fiber optic connector interfaces- Part 4-100: Type SC connector family-simplified receptacle SC- PC connector interfaces (F16 type) Fiber optic connector interfaces- Part 6-100: Type MU connector family-simplified receptacle MU- PC connector interfaces (F17 type) Optical spectrum analyzers-part 2: Calibration method Arc welding equipment-part 10: EMC requirements Motorcycles-Measurement methods for gaseous exhaust emissions during inspection or maintenance Methods for determination of dinitrogen monoxide in flue gas Plastics-Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging-part 1: Designation system and basis for specification that C Optoelectronics Industry and Technology Development C Optoelectronics Industry and Technology Development C Optoelectronics Industry and Technology Development C The Japan Welding Engineering Society D8021 Society of Automotive Engineers of Japan K0110 Japan Environmental Measurement and Chemical Analysis K The Japan Plastics Industry Federation in charge
3 that Plastics-Mixtures of polypropylene K The Japan Plastics (PP) and polyethylene (PE) Industry Federation recyclate derived from PP and PE used for flexible and rigid consumer packaging-part 2: Preparation of test specimens and determination of properties General requirements for the Q17034 Japanese Standards competence of reference material producers Guidance on project management Q21500 Project Management of Japan Performance improvements of Q9027 The Japanese management systems-guideline for Society for Quality Quality Ensurance by Process Control Leash for pet dogs-strength and S9100 Japan Pet Products indication Automatic identification and data capture techniques-bar code printer and bar code reader performance testing X0527 Japan Automatic Identification Systems Systems and software engineering- X25023 Information Systems and software Quality Processing Society Requirements and Evaluation of Japan (SQuaRE)-Measurement of system and software product quality Systems and software engineering- X25024 Information Systems and software Quality Processing Society Requirements and Evaluation of Japan (SQuaRE)-Measurement of data quality in charge
4 Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling Measurement methods of leakage X-ray from X-ray examination rooms Aerosol particle number concentration-calibration of condensation particle counters Control charts-part 4: Cumulative sum charts that X5151 Japan Electronics and Information Technology Industries Z4716 Japan Medical Imaging and Radiological Systems Industries Z8850 The of Powder Process Industry and Engineering, Japan Z Japanese Standards in charge (Total standards newly established:25 ) 2. Revised standards that Name of standard in charge Residential heat pump water C9220 The Japan heaters Refrigeration and Air Conditioning Industry Lighters and utility lighters-safety S4803 Japanese Standards specifications for child-resistance by high operating force
5 that Kitchen equipment-coordinating A0017 Japan of sizes Kitchen & Bath Windows and doorsets-general A1513 Japan Sash rule for test method Doorsets-Diagonal deformation A1521 Japan Sash test under static load Vanities and medicine cabinets A4401 Japan of Kitchen & Bath Components for kitchen A4420 Japan of equipments Kitchen & Bath Screens for windows A4709 Japan Sash Fluid power systems and B Japan Fluid Power components-graphical symbols and circuit diagrams-part 2: Circuit diagrams Glossary of terms for thermal B0126 Thermal and Nuclear power plants-boilers and auxiliary Power Engineering equipment Society Iron and steel pipe fittings- B0151 The Society Piping Vocabulary Engineers Cycles - Screw threads B0225 Japan Bicycle Promotion Institute in charge
6 that Hexalobular internal driving B1015 The Japan Research feature for bolts and screws Institute for Screw Threads and Fasteners Hexalobular socket head screws B1107 The Japan Research Institute for Screw Threads and Fasteners Fasteners-Hexagon weld nuts with B1200 The Japan Research flange Institute for Screw Threads and Fasteners Fatigue test method for B1811 Japan Chain transmission precision roller chains and leaf chains Synchronous belt drives-imperial B1856 Japan Machinery Belt pitch trapezoidal profile system- Belts and pulleys Sluice valves for ordinary water B2062 Japan Valve piping ' Coil springs- Part 1: Basic B Japan Spring calculation methods Coil springs - Part 2:Expression of B Japan Spring the specification U-bolt wire rope grips B2809 The Japan Society of Industrial machinery in charge
7 Field procedures for testing geodetic and surveying instruments-part 8: GNSS (RTK) Fluid power systems and components-cylinders-elements and identification code-part 1: Cylinder bores and piston rod diameters and area ratios Hydraulic fluid power-four-port modular stack valves and four-port directional control valves- Clamping dimensions Hydraulic fluid power-cylinders- Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications Mechanical transport refrigeration units - Test method of cooling capacity Electroacoustics-Sound level meters-part 2: Pattern evaluation tests Environmental testing-part 2-57: Tests-Test Ff: Vibration-Timehistory and sine-beat method that B Japan Surveying Instruments B Japan Fluid Power B8387 Japan Fluid Power B8396 Japan Fluid Power B8614 The Japan Refrigeration and Air Conditioning Industry C The Institute of Noise Control Engineering of Japan C Japanese Standards in charge
8 that Name of standard in charge Classification of environmental C Japanese Standards conditions-part 2-1: Environmental conditions appearing in nature- Temperature and humidity Electromagnetic compatibility C The Institute of (EMC)-Part 4-5: Testing and Electrical Engineers measurement techniques-surge of Japan immunity test Safety of primary batteries with C8514 Battery aqueous electrolyte of Japan Household and similar electrical C The Japan Home- appliances-safety-part 2-207: Health Apparatus Particular requirementsfor Industrial electrolyzed water producing appliances Household and similar electrical C The Japan Home- appliances-safety-part 2-209: Health Apparatus Particular requirements for electric Industrial therapy apparatus for home use Household and similar electrical C The Japan Home- appliances-safety-part 2-210: Health Apparatus Particular requirements for Industrial electromagnetic induction therapy apparatus for home use Household and similar electrical C The Japan Home- appliances-safety-part 2-211: Health Apparatus Particular requirements for heat Industrial therapy apparatus for home use
9 that Household and similar electrical C The Japan Homeappliances-Safety-Part 2-212: Health Apparatus Particular requirements for Industrial vaporizer for home use Bicycles-Spokes and nipples D9420 Japan Bicycle Promotion Institute Cycles-Reflex reflectors D9452 Japan Bicycle Promotion Institute Manganese-molybdenum and G3120 The Japan Iron and manganese-molybdenum-nickel alloy steel plates quenched and tempered for pressure vessels High tensile strength steels for G3129 The Japan Iron and tower structure Steel heat exchanger tubes for low temperature service G3464 The Japan Iron and Polyethylene coated steel pipes- G The Japan Iron and Part 1:External 3 layer extruded polyethylene coated steel pipes Polyethylene coated steel pipes- G The Japan Iron and Part2:External extruded polyethylene coated steel pipes Polyethylene coated steel pipes- G The Japan Iron and Part 3:External polyethylene powder coated steel pipes Shot and grit made of cast iron or G5903 The Japan Iron and cast steel in charge
10 that Magnesium and magnesium H1331 The Japan alloys-general rules for sampling Magnesium and analytical methods Copper and copper alloy sheets, H3100 Japan Copper and plates and strips Brass Copper bus bars H3140 Japan Copper and Brass Copper and copper alloy wires H3260 Japan Copper and Brass Magnesium alloy sheets, plates, H4201 The Japan strips and coiled sheets Magnesium Superconductivity-Residual H7306 The Japanese Electric resistance ratio measurement- Wire & Cable Makers Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors Superconductivity-AC loss H7311 The Japanese Electric measurements-magnetometer Wire & Cable Makers methods for hysteresis loss in superconducting multifilamentary composites General rules for gas K0123 Japan Analytical chromatography / mass Instruments spectrometry ' Petroleum products-determination of octane number, cetane number and calculation of cetane index- Part 1: Research octane number K Petroleum of Japan in charge
11 Petroleum products-determination of octane number,cetane number and calculation of cetane index- Part 2: Motor octane number Requirements for burglarproofness of explosives Test methods for colour fastness to light and perspiration Reference materials - Contents of certificates, labels and accompanying documentation Conformity assessment- Requirements for bodies providing audit and certification of management systems-part 2: Competence requirements for auditing and certification of environmental management systems Conformity assessment- Requirements for bodies providing audit and certification of management systems-part 3: Competence requirements for auditing and certification of quality management systems Information technology-security techniques-requirements for bodies providing audit and certification of information security management systems that in charge K Petroleum of Japan K4832 Japan Explosive Safety L0888 Suga Weathering Technology Foundation Q0031 Japanese Standards Q Japanese Standards Q Japanese Standards Q27006 JIPDEC
12 that in charge Performance improvement of management systems-guidelines for Policy Management Q9023 The Japanese Society for Quality Control Lighters-Safety specifications S4801 Japanese Standards Utility lighters-safety specifications S4802 Japanese Standards Protective helmets for bicycle users T8134 Japan Safety Appliances Universal Disk Format (UDF) 2.01 X0611 Optoelectronics Industry and Technology Development Packaging-Distribution packaging- Graphical symbols for handling and storage of packages Z0150 Japan Packing Institute Construction of wooden framed boxes for packing Z1403 Japan Packing Measurement uncertainty-part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation Z Japanese Standards (Total standards revised:69 ) End of the document
Appendix 1 List of Newly Established and Revised JIS Publicly Notified on January 22, 2018
Appendix 1 List of Newly Established and Revised JIS Publicly Notified on January 22, 2018 < in charge and telephone number> (direct line: 03-3501-9283) (direct line: 03-3501-9287) 1. Newly established
More informationThe Filterautomat. Our Filter Systems Protect. The New Definition of Purity for Your Medium. flow rate 5 m 3 /h to 4,000 m 3 /h. filter fineness 5 µm
GB Filterautomat The New Definition of Purity for Your Medium Our Filter Systems Protect The Filterautomat Cooling Water River Water Plate Heat Exchangers Spray Nozzles Sea Water Sinter and Scale Separation
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationDIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.
PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationChapter 73. Articles of iron or steel
Chapter 73 Articles of iron or steel Notes. 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
More informationEstablished DOC. NO : SSI / PROFILE Rev-03
Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming
More informationLIST OF PRODUCTS UNDER MANDATORY CERTIFICATION
LIST OF PRODUCTS UNDER MANDATORY CERTIFICATION No. IS No. Product Cement 1 IS 12269 Ordinary Portland Cement, 53 Grade 2 IS 12330 Sulphate Resisting Portland Cement 3 IS 12600 Low heat Portland Cement
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationGENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS
- June 2013 Addendum GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS SUBSECTION "A" : GENERAL RULES SUBSECTION "B" : CLASS 1 COMPONENTS SUBSECTION "C" : CLASS 2 COMPONENTS SUBSECTION "D" : CLASS
More informationECO INSTRUMENT (NS M)
Computerized AC Servo Control Universal Material Testing Machine Safety Protection Frame Rubber Type 180 degree grip or 90 degree peel fixture Bending Test Compression Test Specimen Gripping Fixture Product
More informationSchmidthammer. 06 High current carbon brushes. Elektrokohle GmbH. Transmission systems with linear adjustable telescope holders p.
Schmidthammer Elektrokohle GmbH 06 High current carbon brushes 2012 Transmission systems with linear adjustable telescope holders p. 05 Transmission systems with Kombi holders p. 09 Further transmission
More informationINDUCTION FOR CARS OVERVIEW OF APPLIED AUTOMOTIVE APPLICATIONS AXLE SHAFTS GEAR BOX ELEMENTS WHEEL BOLTS BRAKE FLUID CONVEYANCE PIPES
INDUCTION FOR CARS OVERVIEW OF APPLIED AUTOMOTIVE APPLICATIONS MOTOR DRIVE BRAKES EXHAUST SYSTEM FEED SYSTEM ACCESSORIES BODY HYDRAULIC SERVO CONTROLS SUSPENSIONS Giorgio Mazzola Massimo Mosca VALVES CRANKSHAFT
More information1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc.
Product Name Picture Alloy Temper Thickness Width 5 bars Tread Plate /Aluminu m Checker Plate 1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc. H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38,
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationSTAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels
These steels contain a high percentage of chromium and sometimes other alloys and have been designed to prevent different types of corrosion. There are two kinds of corrosion: dry corrosion (often named
More informationElectrical Resistance Monitoring
Electrical Resistance Monitoring (ER) Introduction The electrical resistance (ER) technique is an on-line method of monitoring the rate of corrosion and the extent of total metal loss for any metallic
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
Page 220529-1 SECTION 220529 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING
SECTION 22 05 29 HANGERS AND SUPPORTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationResource Guide. Section 3: Ductile Iron
Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...
More informationHANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
13686.00 HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 230529-1 SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT 1.1 SUMMARY A. Section Includes: 1. Metal pipe hangers and supports.
More informationRL SERIES. Two Stage Light Oil Burners FIRING RATES LIGHT OIL
The RL series of burners covers a firing range from 154 to 2700 kw, and it has been designed for use in low or medium temperature hot water boilers, hot air or steam boilers, diathermic oil boilers. Operation
More informationENSA ENWESA SERVICES INDEX
ENSA ENWESA SERVICES INDEX 1. ENGINEERING, DESIGN AND TECHNOLOGY SERVICES (Ensa / ENWESA) Ensa has extensive experience designing nuclear components and pressure vessels since 1973 according to international
More informationLifting Appliances of Ships and Offshore Installations
CCS Rule Change Notice For: Lifting Appliances of Ships and Offshore Installations Version: May, 2016. RCN No.1 Effective date: 19 May, 2016 Beijing CONTENTS Chapter 3 CRANES, LIFTS, RAMPS AND SELF-LOADING
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 - HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The General Conditions, Special Conditions and Division 1 through Division 22 as set forth in
More informationOKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA
106-5(a-f) 09 OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA These Special Provisions amend, revise, and where in conflict, supersede applicable sections of the 2009 Standard
More informationNUCLEAR. Nuclear Reactor Pressure Vessel Seals
NUCLEAR Nuclear Reactor Pressure Vessel Seals SEALING CONCEPT Technetics Group is the world s leading manufacturer of Nuclear Reactor Pressure Vessel (RPV) Closure Head Seals. In addition, Technetics Group
More informationXMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor
Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output
More informationDARTMOUTH COLLEGE DESIGN September 15, 2004 &CONSTRUCTION GUIDELINES
PART 1 DESIGN DIRECTIVE 1.1 RELATED DOCUMENTS SECTION 15240 SEISMIC RESTRAINT AND VIBRATION CONTROL A. This section shall be considered as a part of each DC Standards, Part 15. 1.2 QUALITY ASSURANCE A.
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationMetals Analyzer. OES 6000 Optical Emission Spectrometer. fast and accurate metal analysis
fast and accurate metal analysis Application fields Elemental analysis plays a crusial role in the quality control of the metal smelting, casting and processing industry. Skyray Instruments s are widely
More informationMANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 8: Forming Processes (Rolling, Extrusion, Forging, Drawing) DR. SOTIRIS L. OMIROU Forming Processes - Definition & Types - Forming processes are those in which
More informationSTOCKIST SUPPLIERS & EXPORTERS:
PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon
More informationHD 152 HD 172 In-line mounting Operating pressure up to 630 bar Nominal flow rate up to 190 l/min
High Pressure Filters Worldline HD HD 7 In-line mounting Operating pressure up to bar Nominal flow rate up to 9 l/min Description Application In the high pressure circuits of hydraulic systems. Performance
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL and BEARINGS 303
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING
More informationSeries Sump and Sewage Systems
Series 000 Sump and Sewage Systems file no: 0. date: may 17, 13 supersedes: 0. date: march 29, 13 Series 000 Sump Series 0 & 2 Armstrong offers a complete range of high performance, easily maintained Column
More informationSECTION VIBRATION ISOLATION
SECTION 15240 VIBRATION ISOLATION PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15450 - Plumbing Equipment. 2. 15510 - Piping (HVAC). 3. 15515 Valves, Hangers, and Specialties. 4. 15540 - Pumping
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT II Hot & Cold Working - Drawing & Extrusion Drawing Drawing is an operation in which the cross-section of solid rod, wire or tubing is reduced or changed in shape by pulling
More informationWE01A GMA (MIG) Plug Weld
Uniform Procedures For Collision Repair WE01A GMA (MIG) Plug Weld 1. Description This procedure describes methods for making and evaluating gas metal arc (GMA) plug welds (MIG plug welds) on all types
More informationPressure transducers DMU 02 Vario (flush)
Process engineering (flush) Ideal for hygienic processes Connection technology with numerous versions Extremely resistant to shock, pulsation and vibration Best dynamic pressure resistance at high load
More informationResource Guide. Section 2: Gray Iron
Resource Guide Section 2: Gray Iron Section 2 Gray Iron Description of Grades... 2-3 G1 Partially Ferritic... 2-4 G1A Ferritic... 2-6 G2 Highly Pearlitic... 2-8 G2A Highly Perlitic High-Strength... 2-10
More informationTerrain HDPE. Product Guide
TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationInnovative heat treatment technologies. Field proven reliability and cutting-edge technology for every application
Innovative heat treatment technologies Field proven reliability and cutting-edge technology for every application Leading-edge heat treatment furnaces meeting international safety and quality standards
More informationM21Si ISO and M21Vi ISO Reduced Bore Ball Valves DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationTable of Contents Model Numbering System Ratings/Connections General Data
Specification Data CH3000 5/97 Control Valves A Complete Line of Heavy Duty, Balanced, Cage Guided, Globe Valves with VRT Anti-Cavitation and Noise Control Lo-dB Trim Table of Contents Model Numbering
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 898-5 Second edition 1998-08-01 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners not under tensile stresses
More informationWe manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars
EXTRUDED RODS INTRODUCTION` We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars in different shapes like round, hex, square, rectangular & flat. We
More informationTable of Contents. A Operate and monitor Micro Hydel Power Plant (MHP) plant 04
Page 2 Table of Contents Competency Standards A Operate and monitor Micro Hydel Power Plant (MHP) plant 04 B Carry out corrective maintenance procedures on electrical components in a MHP plant 05 C Carry
More informationCLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO. Capacitive level meters CLM 36. Features of variants. Accessories
CLM-36 MISURATORI CAPACITIVI IN CONTINUO CONTROLLI DI LIVELLO Capacitive level meters CLM 36 Capacitive level meters Riels CLM are designed for continuous level measurement of liquids, powders and bulk-solid
More informationSECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
More informationFeatures. Measurement range :0-10ppm or 0-500ppm. Large touch panel display for easy operation in the field. Standard Specifications
High Sensitivity Sulfur Content Analyzer HSCA- The HSCA- is a high sensitivity on-line process sulfur analyzer ideal for the quality control of sulfur concentrations in petroleum production lines. It is
More informationNPS/002/001 Technical Specification for Earthing Materials
Version:- 6.0 Date of Issue:- October 2017 Page 1 of 14 NPS/002/001 Technical Specification for Earthing Materials 1. Purpose The purpose of this document is to detail the requirements of Northern Powergrid
More informationEngineered Parts Your Design Our Competence
Engineered Parts Your Design Our Competence Engineered Parts by Bossard Your Design Our Competence Competent Partner Proven Quality Highest Supply Reliability Optimum Price-Performance-Ratio Competent
More informationVisual Level Indicators VLI
WEKA Visual Level Indicators VLI Certified according ISO 9001:2000 Certified according PED 97/23/EC Member of the Group Certified according ATEX 94/9/EC Principles of design Single-pole Magnet System The
More informationOSNALINE. Tubes and tube bundles. Member of the KME Group. KME Germany AG & Co. KG [GB] OSNALINE
OSNALINE Tubes and tube bundles KME Germany AG & Co. KG OSNALINE [GB] Member of the KME Group KME Germany AG & Co. KG Experts in tube bundles KME Germany AG & Co. KG is a member of the KME Group S.p.A.
More informationA.Z.E. SUPPLY COMPANY
PIPE * VALVES * FITTINGS COMMERCIAL * MARINE * MILITARY CAGE : OBGU9 CREDIT CARDS ACCEPTED FOR PURCHASE PIPE AND TUBING Carbon Steel A53, A106, A500, A512, A513 Stainless A312, A213, A269, GR.304, 304L,
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304
CONTENTS Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 40 203 PERFORMANCE CURVE 80 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300
More informationChapter 15 Extrusion and Drawing of Metals
Introduction Chapter 15 Extrusion and Drawing of Metals Alexandra Schönning, Ph.D. Mechanical Engineering University of North Florida Figures by Manufacturing Engineering and Technology Kalpakijan and
More informationMENG 356 MECHANICAL DESIGN I. Course Syllabus
Course Syllabus Instructor: Office: New Falaki Building, room 517 (FLAC 517) Phone: 797-5546 Email: hhegazi@aucegypt.edu Class Hours: Tuesday 8:00-9:00 am and Thursday 8:00-9:00 am References: 1- Norton,
More informationENERGY WIND POWER SOLUTIONS FOR POWER AND SIGNAL TRANSFER ELECTRICAL PROTECTION
ENERGY WIND POWER SOLUTIONS FOR POWER AND SIGNAL TRANSFER ELECTRICAL PROTECTION MERSEN WindtrackerTM services A world leader committed to Renewable Energies A world leading supplier of solutions for electrical
More informationAtlas Copco. High-pressure oil-free air piston compressors P 37 - P 160 / 25 to 40 bar / 37 to 160 kw
Atlas Copco High-pressure oil-free air piston compressors P 37 - P 160 / 25 to 40 bar / 37 to 160 kw Proven reliability at the lowest operational cost By combining the right mix of innovation, high-tech
More informationSTOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL
STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,
More informationSTANDARDS CODES CC02 ASTM A143
Standard Specification Grade/Class/Type Description CC01 ASTM A123 Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products CC02 ASTM A143 Specification for Safeguarding Against
More information1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.
BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2
More informationSolid-State Welding Processes
Solid-State Welding Processes Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 31 Solid-State State Welding Processes Joining takes place without fusion
More informationSECTION COOLING TOWER
PART 1 GENERAL 1.1 SECTION INCLUDES A. Mechanical induced draft Cooling Tower B. Controls C. Ladder and handrails 1.2 REFERENCES SECTION 23 65 00 COOLING TOWER A. ANSI/AFBMA 9 - Load Rating and Fatigue
More informationCompact flue gas analyser: testo 300 M-I
220 Compact flue gas analyser: testo 300 M-I PC analysis Prints Small memory -------------------- testo 300-I -------------------- 16.07.2001 09:36:22 C Quick flue gas checks are of interest for all industrial
More informationSECTION HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT
SECTION 220529 HANGERS AND SUPPORTS FOR PLUMBING PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationHAWLE-range of products
HAWLE-pRODucTS All OvER ThE world since 1948 HAWLE-range of products HAWLE subsidiaries HAWLE partners Illustrations, technical data, dimensions and weights are subject to alteration without notice. Edition
More informationILMK 382. Stainless Steel Probe. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO.
ILMK 8 Stainless Steel Probe Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 40 cmh O up to 0... 00 mh O Output signals -wire: 4... 0 ma
More informationRIELLO 40 N SERIES. One Stage Heavy Oil Burners FIRING RATES HEAVY OIL. N kw N kw
One Stage Heavy Oil Burners RIELLO 40 N SERIES The Riello 40 N series of one stage heavy oil burners, is a complete range of products developed to respond to any request for the use of heavy oil in heating
More informationSINTERED WIRE MESH.
SINTERED WIRE MESH www.sinteredfilter.org "Total filtration solution provider" For over 15 years, Boegger has been providing filtration solutions to a wide range of filtering industries where air, liquid
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More information5. AMCA 301 Method of Publishing Sound Ratings for Air Moving Devices. 6. AMCA 500 Test Methods for Louver, Dampers, and Shutters
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationJULES HOROWITZ REACTOR: RCC-MRx [1] APPLICABILITY FOR THE DESIGN PHASE OF EXPERIMENTAL DEVICES. S. GAY 1, S. GAILLOT 1
JULES HOROWITZ REACTOR: RCC-MRx [1] APPLICABILITY FOR THE DESIGN PHASE OF EXPERIMENTAL DEVICES. S. GAY 1, S. GAILLOT 1 Abstract. 1) CEA, DEN, DTN, Nuclear Technology Department, CEA Cadarache. F-13108
More informationWE11S GMA (MIG) Fillet Weld
Uniform Procedures For Collision Repair WE11S GMA (MIG) Fillet Weld 1. Description This procedure describes methods for making and inspecting GMA (MIG) fillet welds on automotive steel. 2. Purpose The
More informationStainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
More informationPART PG GENERAL REQUIREMENTS FOR ALL METHODS OF CONSTRUCTION
CONTENTS Foreword... xv Statements of Policy... xvii Personnel... xix Preamble... xxxi Summary of Changes... xxxiii List of Changes in BC Order... xxxvi PART PG GENERAL REQUIREMENTS FOR ALL METHODS OF
More informationINDIAN REGISTER OF SHIPPING CLASSIFICATION NOTES. Type Approval of Mechanical Joints used in Piping
INDIAN REGISTER OF SHIPPING CLASSIFICATION NOTES Type Approval of Mechanical Joints used in Piping January 2017 Page 2 of 16 Changes in JANUARY 2017 Version Type Approval of Mechanical Joints used in Piping
More informationRecent Developments in Stay Cable Systems
Recent Developments in Stay Cable Systems PTI Technical Conference, Reno- 2006 Khaled Shawwaf, Technical Director (C) COPYRIGHT POST-TENSIONING INSTITUTE, ALL RIGHT RESERVED Page 1 of 45 * Cable Stayed
More informationMechatronics Courses by School Period
Mechatronics Courses by School Period Year One P1 P1 P2 P3 P3 P3 P4 P4 P4 Integrated Systems Industrial Math (Geometry, Trig, Algebra,) Blueprint Reading Machine Tool I (Hand tools-measuring-saws & Drill
More informationInternational Nickel Study Group 6th-10th October 2008 Lisbon, Portugal. Special Steels. Speaker: Salvatore Pinizzotto Xida (Market Research) Ltd.
International Nickel Study Group 6th10th October 2008 Lisbon, Portugal Special Steels Speaker: Salvatore Pinizzotto Xida (Market Research) Ltd. Definition STATO DELL ARTE All steels are SPECIAL in some
More informationSECTION HVAC PIPING INSULATION
SECTION 23 0719 HVAC PIPING INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Includes But Not Limited To: 1. Furnish and install insulation on above ground refrigerant piping and fittings as described in Contract
More informationDESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7
DESIGN GUIDELINES WIRING AND CONDUITS PAGE 1 of 7 1.1. REFERENCE STANDARDS 1.1.1. Publications listed below (including amendments, addenda, revisions, supplements and errata) form a part of this specification
More informationUniversity of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 40 00_PLUMBING FIXTURES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5.
More informationAppendix A British and ISO standards related to welding and aluminium
Appendix A British and ISO standards related to welding and aluminium Listed below are all of the European and ISO standards that are related to the properties, composition and product forms of aluminium
More informationASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE. Part B Nonferrous Material Specifications
2013 ASME Boiler and Pressure Vessel Code AN INTERNATIONAL CODE II Materials Part B Nonferrous Material Specifications 4. 2013 ASME FINAL Covers_II Part B MECH 5.9.indd 1 5/15/13 5:30 PM AN INTERNATIONAL
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationTURBIDITY TB 300 IR TB 210 IR TB 250 WL. General Catalogue April 2015
TURBIDITY 128 TB 300 IR TB 210 IR TB 250 WL www.lovibond.com General Catalogue April 2015 Turbidity measurement The term "turbidity is used to describe the cloudy or milky appearance of liquid or solid
More informationWhat Are Metal Standards and Why Are They Important?
What Are Metal Standards and Why Are They Important? Table of Content Metallurgy101...3 Pure Metals...3 Component Metals...4 Characteristics of Metal Standards...5 Metal Standards and Testing Standards...6
More informationGear Pumps. Precise, Pulseless, Repeatable Performance. In Polymer Applications.
Zenith Pumps PEP-II Series Gear Pumps Precise, Pulseless, Repeatable Performance In Polymer Applications. Zenith Pumps In 1926, Zenith Pumps developed the first precision metering gear pump for the extrusion
More informationBuilding & Ductwork Airtightness Standards
Building & Ductwork Airtightness Standards Version 1.02, August 2013 Standard Reference Technical Body Title ICS (International Classification for Standards) Scope Door and Windows EN 12207:1999 Windows
More informationStandards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
More informationx act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.
Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output
More informationTechnical data Housing material &URTHERôVERSIONSôONôREQUEST
Silencer Plastic version Sintered bronze with thread or plug connection Various construction Flat design for restricted space Stainless steel silencer Silencers are used to reduce the noise level of the
More information