Recommended Cutting Parameters
|
|
- Nicholas Hood
- 6 years ago
- Views:
Transcription
1
2 CBN insert PCD insert Thermostability/ Thermostability( ) Compression Strenth/Mpa Compression Strenth/Mpa Kc/ 9. 0 Kc/ 9.0 Hardness HV8000 Hardness HV K/[W/m*k] 700 K/[W/m*k] CTE/ CTE/ PCD: Nonferrous metal:such as Aluminium,Alumunium alloy, copper,carbide,titanium,magnesium,zinc,plumbum; Non-metal: such as glass fiber, carbon fiber and enforced plastic Recommended Cutting Parameters Cutting speed (m/min) Feedback (mm/rev.) Depth (mm) Aluminium Aluminium Alloy Non-Ferrous Carbide Insert Workpiece Material CBN Grey Cast Iron Ductile Cast Iron Alloy Cast Iron Ferrous Alloy Hardened Steel Hardness HB HB HB HRC45-50 HRC45-65 Heat-resistance Alloy PCD Remark: Kc:Fracture Toughness K:coefficient of thermal conductivity CTE:Coefficient of thermal expansion 01 Suitable Material CBN: Stable chemical stability for ferrous metals. It can work well on harded steel (HRC45-65), bearing steel(hrc60-62), HSS( HRC62), tool steel(hrc57-60) and hardened cast iron. Also suitable for hightemperature alloy, hot-painting material, carbide( 10% cobalt content) and other hard cutting material in high speed work condition. It can replace grinding to increase effiecency.
3 CNMA CNMA CNMA CNMA WNMA WNMA WNMA WNMA TNMA TNMA TNMA TNMA VNMA VNMA VNMA VNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA SNMA SNMA SNMA SNMA CNMA CNMA CNMA CNMA WNMA WNMA WNMA WNMA TNMA TNMA TNMA TNMA VNMA VNMA VNMA VNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA SNMA SNMA SNMA SNMA
4 SCMT SCMT SCMT SCMT SCMT SCMT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCMT TCMT TCMT TCMT TCMT TCMT VCMT VCMT VCMT VCMT VCMT VCMT
5 CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT SCMT 09T302 SCMT 09T304 SCMT 09T CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT SCMT 09T302 SCMT 09T304 SCMT 09T308
6 VCMT VCMT VCMT VCMT VCMT VCMT VCMT VCMT MGMN 150 MGMN 200 MGMN 250 MGMN 300 MGMN 400 MGMN 500 MGMN 150 MGMN 200 MGMN 250 MGMN 300 MGMN 400 MGMN ER AG60 16ER AG60 16IR AG60 16IR AG60 APKT 1135 APKT 1135 APKT 1604 APKT 1604 SEKT 1204 SEKT
7 CNMA CNMA CNMA CNMA WNMA WNMA WNMA WNMA TNMA TNMA TNMA TNMA VNMA VNMA VNMA VNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA SNMA SNMA SNMA SNMA CNMA CNMA CNMA CNMA WNMA WNMA WNMA WNMA TNMA TNMA TNMA TNMA VNMA VNMA VNMA VNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA DNMA SNMA SNMA SNMA SNMA
8 CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT CCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT DCMT SCMT 09T302 SCMT 09T304 SCMT 09T308 SCMT 09T302 SCMT 09T304 SCMT 09T308 07
9 SCMT SCMT SCMT SCMT SCMT SCMT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCGT TCMT TCMT TCMT TCMT TCMT TCMT VCMT VCMT VCMT VCMT VCMT VCMT
10 VCMT VCMT VCMT VCMT VCMT VCMT VCMT VCMT MGMN 150 MGMN 200 MGMN 250 MGMN 300 MGMN 400 MGMN 500 MGMN 150 MGMN 200 MGMN 250 MGMN 300 MGMN 400 MGMN ER AG60 16ER AG60 16IR AG60 16IR AG60 APKT 1135 APKT 1135 APKT 1604 APKT 1604 SEKT 1204 SEKT
11 PCD Tuining and Milling Tools OD ID 10; 12; 14 16; 18; 20 OT IT 10; 12; 14 16; 18; 20 OG IG 10; 12; 14 16; 18; 20 Milling 6-20 Chamfer 10; 12; 14 16; 18; 20 Contact Information Tel.: Cell: Website: 10
Grade, New Generation Inserts for Gray Cast Iron and Ductile Cast Iron Machining
1/5, New Generation Inserts for Gray Cast Iron and Ductile Cast Iron Machining 2/5, new generation inserts for gray cast iron and ductile cast iron machining With its innovative and creative technology,
More informationBECKER PCD & CBN Inserts
BECKER & Inserts Please include tip style and grade when ordering. Ordering Example: DCMW-21.52 PBC-40 Insert s= insert thickness CCMW-21.50.5 CCMW-21.51 CCMW-21.52 CCMW-32.50.5 CCMW-32.51 CCMW-32.52 CNMA-430.5
More informationInsert Styles Positive CCMT, DCMT, RCMT, SCMT, TCMT, TPMR, VBMT Negative CNMA/CNMG, DNMA/DNMG, HNMG, SNMA/SNMG, TNMA/TNMG, VNMG, WNMA/WNMG
New Turning s for Gray and Ductile Cast Iron s - Maximum wear resistance in gray and ductile cast iron - General purpose applications in gray and ductile cast iron. Suit able for continuous to interrupted
More informationMK / RK Chip Breaker. Turning Solution for Cast Iron NC6315. MK Chip Breaker. RK Chip Breaker
MK / Chip Breaker MK Chip Breaker (For medium ) Turning Solution for Cast Iron Advanced turning solution for cast iron under high speed, high feed, and interrupted conditions Higher Wear and Chipping Resistance
More informationTools, tips & productivity. Praxis-Report No. 19. Hard turning with SPK-WURBON and SPK Mixed Ceramic
Tools, tips & productivity Praxis-Report No. 19 Hard turning with SPK-WURBON and SPK Mixed Ceramic Tools, tips & productivity Tools - Inserts + tooling systems Tips - Recommendations for application +
More informationTurning Tools & Inserts
Turning Tools & Inserts Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD i Leitz Metalworking Technology Group Under the name LMT Leitz Metalworking Technology Group the
More informationRose Gold Color Coated Carbide for Highly Stable Cast Iron Machining
New CVD Coated Carbides for Cast Iron New CVD Coated Carbides for Cast Iron Rose Gold Color Coated Carbide for Highly Stable Cast Iron Machining Improved coating adhesion prevents chipping and provides
More informationNew CVD Coated Carbide. Gray and Nodular Cast Iron. for Gray and Nodular Cast Iron. New Bright Black (BB) Coating Technology
for Gray and Nodular Cast Iron New Bright Black (BB) Coating Technology New CVD Coated Carbide for Gray and Nodular Cast Iron New Bright Black (BB) Coating Technology New CVD Coated Carbide Improved coating
More informationCEC. Cutting Edge Carbide STANDARD ISO TURNING INSERTS
STANDARD ISO TURNING INSERTS Content Technological avantage, cutomer benefit enomination Chip groove geometrie Inexable inert Turning grae overview Technical hint Machining example Sale organiation 3 4
More informationHSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts:
Twist drills DIN 338 type N High performance twist drill suitable for all normal drilling in conventional materials. Point cut: helical point Helix angle: 20-30 tolerance: h8 Right-hand cutting 1,0 up
More information1 Cutting Tool Materials of common use
1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development of cutting tool materials.
More informationNGK SPARK PLUG EUROPE GMBH NGK SPARK PLUGS(U.K.), LTD
2007-2008 http://www.ngkntk.de/ http://www.ntkcuttingtools.co.uk/ http://www.ngkntk.co.jp/ 2007 2008 CUTTING TOOLS NGK SPARK PLUG EUROPE GMBH NGK SPARK PLUGS(U.K.), LTD Best Performance for Al alloy (High
More informationBZN* Compacts Tool Blanks and Inserts. Machining of Ferrous Materials
BZN* Tool Blanks and Inserts Machining of Ferrous Materials BZN* Tool Blanks and Inserts Diamond Innovations manufactures a complete line of high quality polycrystalline CBN products for machining ferrous
More informationUE6020 LJ387A. CVD coated grade for turning of steels MITSUBISHI CARBIDE. Tough and versatile for reliable turning of steels
MITSUBISHI CARBIDE LJ387A Tsukuba Plant Tsukuba Plant ISO 9001-1994 ISO 14001-1996 Registration No. JSAQ 080 Registration No. JSAE 036 Gifu Plant ISO 9001-1994 Registration No. JSAQ 094 General purpose
More informationdreborid -»chipbreaker«program
dreborid -»chipbreaker«program dreborid PCD inserts with»chipbreaker«for controlled chipbreaking of long chip aluminum alloys Patents EP 1023961, EP 1023962, US 6,315,502 dreborid CO PCD insert with»chipbreaker«insert
More informationSuperabrasive CUTTING TOOLS & WEAR PARTS
Superabrasive CUTTING TOOLS & WEAR PARTS CUTTING TOOLS Polycrystalline Diamond (PCD) PCD Cutting Tools PCD tools are as abrasion resistant as natural diamond tools and are much tougher. The diamond layer
More informationRAMAX 2. Prehardened stainless holder steel
RAMAX 2 Prehardened stainless holder steel This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be
More informationUDDEHOLM VIDAR 1 ESR
UDDEHOLM VIDAR 1 ESR This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty
More informationDevelopment of New Grade SUMIBORON BN7000 for Cast Iron and Ferrous Powder Metal Machining
SPECIAL ISSUE Development of New SUMIBORON for Cast Iron and Ferrous Powder Metal Machining Yusuke Matsuda*, Katsumi OKaMura, shinya uesaka and tomohiro FuKaYa SUMIBORON P (polycrystalline cubic boron
More informationHIGH PERFORMANCE PRODUCT
HIGH PERFORMANCE PRODUCT SYNCHRO TAPS (HSS-PM) High Speed, High Precision for CNC Machining Synchro Tap has an optimized short thread length and high thread reliefs. We guarantee you shorter cycle time,
More informationMP / LP Chip Breaker. Turning Insert for Machining Automobile Components. MP (Negative) MP (Positive) LP (Negative)
MP (Negative) For medium cutting MP (Positive) For medium cutting Turning Insert for Machining Automobile Components Complete turning solution to increase productivity at a wide range of cutting speed,
More informationUDDEHOLM RAMAX LH. Uddeholm Ramax LH is a part of the Uddeholm Stainless Concept.
UDDEHOLM RAMAX LH TAKING STANDARDS TO A NEW LEVEL Setting standards is important in the tooling industry. Uddeholm Ramax LH is no exception. It is a first class tool steel for mould bases, with excellent
More informationCutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba
Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those
More informationUddeholm Vanax SuperClean. Uddeholm Vanax SuperClean
Uddeholm Vanax SuperClean 1 Vanax is a trade mark registered in the European Union and in the U.S. UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without
More informationUddeholm Formvar. FORMVAR is a trade mark registered in the European Union
Uddeholm Formvar FORMVAR is a trade mark registered in the European Union UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright
More informationMATERIALIZING VISIONS. Bohler-Uddeholm H13 TOOL STEEL
MATERIALIZING VISIONS Bohler-Uddeholm H13 TOOL STEEL Bohler-Uddeholm H13 General Bohler-Uddeholm H13 is a chromium-molybdenumvanadium alloyed steel which is characterized by: Good resistance to abrasion
More informationMAXIMILL MILLING SYSTEM ENGINEERED SIMPLICITY. 8 Cutting Edges. More milling. More parts. More profits.
MAXIMILL 491 MILLING SYSTEM ENGINEERED SIMPLICITY 8 Cutting Edges. More milling. More parts. More profits. www.ceratizit.com 22 We work hard to make things easy. It takes a lot of engineering and know-how
More informationAISI D2 Cold work tool steel
T OOL STEEL FACTS AISI D2 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationAISI A2 Cold work tool steel
T OOL STEEL FACTS AISI A2 Cold work tool steel Great Tooling Starts Here! General AISI A2 is an air- or oil hardening chromiummolybdenum-vanadium alloyed tool steel characterized by: Good machinability
More informationNanostructured and Amorphous Materials Inc. NanoAmor NanoAmor
About our Products Nanostructured and Amorphous Materials Inc.(NanoAmor ) introduces a new line of Superhard Materials products. Manufactured using diamond and cubic boron nitride (CBN), these products
More informationTOOLING NEWS E-127. Coated Carbide Grades for Stainless Steel Turning AC6030M / AC6040M
TOOLING NEWS E-127 P M K N S H Coated Carbide Grades for Stainless Steel Turning / - New Absotech Platinum technology - New CVD grade for general purpose - New Absotech Bronze technology - New PVD grade
More informationUDDEHOLM NIMAX. Nimax is a trade mark registered in the European Union and in the U.S.
UDDEHOLM NIMAX Reliable and efficient tool steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be
More informationVANADIS 10 SuperClean High performance powder metallurgical cold work tool steel
SuperClean High performance powder metallurgical cold work tool steel Critical tool steel properties for GOOD TOOL PERFORMANCE Correct hardness for the application Very high wear resistance Sufficient
More informationDIJET CARBIDE TOOLS. Carbide Grades. Carbide Grades
DIJET CARBIDE TOOLS Dijet Grades for Cutting Tools Sintered Super Hardened Polycrystalline CBN (for high hardened materials) Polycrystalline Diamond PCD (for aluminum, non-ferrous metal) Turning Grades
More informationTOOLING NEWS E-116. New SumiDrill Power Series Expansion. SDP Type. All-rounder for Drilling
TOOLING NEWS E-116 P M K N S H New SumiDrill Power Series Expansion All-rounder for Drilling - High efficient drilling in wide application range - General purpose application - Maximum performance by increased
More informationUddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance.
UDDEHOLM DIEVAR Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. The chemical composition and the very latest in production technique make
More informationALLROUNDER CUTTING TAPS
ALLROUNDER CUTTIN TAPS TECHNIK FÜR EWINDE ALLROUNDER Our multi-purpose cutting taps cover a comprehensive range of materials. They can be applied for the reliable machining of various materials ranging
More informationCUTTING TOOL TECHNOLOGY
CUTTING TOOL TECHNOLOGY Tool Life Tool Materials Tool Geometry Cutting Fluids Cutting Tool Technology Two principal aspects: 1. Tool material 2. Tool geometry Three Modes of Tool Failure Fracture failure
More informationIncreasing the Efficiency of Metalform Tooling for Advanced High Strength Steels
Increasing the Efficiency of Metalform Tooling for Advanced High Strength Steels By: Brett Krause and Tom Bell of Bohler Uddeholm Corporation Introduction Information on Bohler Uddeholm Newly developed
More informationMATERIALIZING VISIONS. Bohler-Uddeholm M42 HIGH SPEED STEEL
MATERIALIZING VISIONS Bohler-Uddeholm M42 HIGH SPEED STEEL General Cobalt-alloyed, molybdenum high speed steel possessing high hardness, excellent cutting properties, exceptional compressive strength,
More informationPCD / PCBN Cutting Tools for Metal Working. Stationary Diamond Dressers.
PCD / PCBN Cutting Tools for Metal Working. Stationary Diamond Dressers. Shinhan Diamond Industrial Co., Ltd. has produced a variety of diamond tools from products for construction and stone to those for
More informationIndex. MEGA-Spike-Drill. Product presentation 4 General information 5 Technical specification 5. MEGA-Spike-Drill M9535 6
The tool specialists for the trade. Standard product line MEGA-Spike-Drill The tool specialists for the trade. MILLER GmbH, Präzisionswerkzeuge in Altenstadt is a member of the tool-traders-partner association
More informationPRELIMINARY BROCHURE. Uddeholm Vanadis 8 SuperClean
PRELIMINARY BROCHURE Uddeholm Vanadis 8 SuperClean UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information
More informationINTRODUCTION. Think HSS
INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM
More informationVanax SuperClean. Uddeholm Vanax SuperClean
Vanax SuperClean Uddeholm Vanax SuperClean ASSAB is a trademark of voestalpine High Performance Metals Pacific Pte Ltd. The information contained herein is based on our present state of knowledge and is
More informationBrake disc machining EN
Brake disc machining EN CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT - our solutions to complex
More informationDAYE JINGCHENG MOULD CO., LTD TOOL STEEL PRODUCT
1.2343 Hot Work Tool Steel Identification Designation by Standards Mat. No. DIN EN AISI 1.2343 X38CrMoV51 X38CrMoV51 H11 Chemical Composition C Si Mn Cr Mo V P S 0.36 0.90 0.30 4.80 1.10 0.25 0.030 0.030
More informationLEVEL 1/2 CAMBRIDGE NATIONAL AWARD/CERTIFICATE IN ENGINEERING MANUFACTURE. Candidate Surname
SPECIMEN LEVEL 1/2 CAMBRIDGE NATIONAL AWARD/CERTIFICATE IN ENGINEERING MANUFACTURE R109: Engineering materials, processes and production Candidates answer on the question paper. OCR Supplied Materials:
More informationCarbide Modular Shrink System
Carbide Modular Shrink System Millstar s Carbide Modular Shrink System offers versatility, strength and accuracy. The carbide shank offers strength and rigidity and the shrink tolerances offer better accuracy
More informationCC1500 / CC2500. Cermet Solution for High Speed Steel Turning CC1500 CC2500
/ Cermet Solution for High Speed Steel Turning The next generation coated cermet with higher wear and chipping resistance in high speed machining High Resistance to Welding and Oxidation Improved welding
More informationUDDEHOLM QRO 90 SUPREME
UDDEHOLM QRO 90 SUPREME This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty
More informationQRO 90 SUPREME Hot work tool steel
T O O L S T E E L F A C T S QRO 90 Hot work tool steel Great Tooling Starts Here! Cover photo: Bo Dahlgren This information is based on our present state of knowledge and is intended to provide general
More informationGrade Etch color C Si Mn Cr Mo P S Ni. 416 Dark 0,22 <1 <1,25 13 <0,6 <0,06 0, Bright 0,23 <1 < <0,04 0,03 3
Stainless damascus barrel steel for rifles Damasteel s stainless Barrel steel is a RSP (Rapid Solidification Powder) based steel with AISI 416/431 as the constituent alloys. The steel is developed and
More informationEUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS
EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS TMX Saws A History of European Quality & Craftsmanship The history of TMX saws dates to 1921 Poland with manufacturing
More informationSTEELS & COATINGS FOR CUTTING TOOL APPLICATIONS
STEELS & COATINGS FOR CUTTING TOOL APPLICATIONS Requirements for cutting tools There are several characteristics that are essential to the good performance of a cutting tool. Powder Metal High Speed Steels
More informationICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com BORING TOOLS BORING TOOLS INDEX BORING BARS CARBIDE TIPPED...1
More informationTechnical Information
Technical Information Quality LUKAS carbide burrs are manufactured using high quality types of carbide and modern CNC automatic grinding machines in order to guarantee precision and repeatability of angle,
More informationQRO 90 SUPREME. Hot work tool steel
QRO 90 SUPREME Hot work tool steel This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed
More informationTooling for Composites and Aerospace Materials. Diamond coated, carbide and PCD tools Routers, drills, and end mills Full special design capabilities
Tooling for Composites and Aerospace Materials Diamond coated, carbide and PCD tools Routers, drills, and end mills Full special design capabilities DIAMOND COATED DRILLS Material-specific design and sub-micron
More informationKeeping the Customer First. Tungaloy Catalogue TE0707-E2. Cutting Tools.
Keeping the Customer First Tungaloy Catalogue TE0707-E2 2007 Cutting Tools www.tungaloy-eu.com Selection Guides List of... 410 Selection Guides... 412 Specifications Solid Carbide s For High Speed Deep
More informationMaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling EN CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT
More informationNexus Cutting Tools. Accurate. Simplify. Nexus ShrinkMILL and Face Mills. Innovative. Solutions that are innovative, accurate, and simple.
Nexus Cutting Tools Solutions that are innovative, accurate, and simple. Minimize T.I.R. Maximize rigidity Increase tool life Lamina High-Performance Eliminate insert guesswork Minimize set up time Maximize
More informationMounted points. Table of contents. Hardness R for foundries Cylindrical ZY 35 Tree SP 35 Tapered KE 36
Fine grinding and polishing tools iamond and CBN tools 204 205 Mounted points able of contents Contents Page General information 3 he fast way to the best tool 4 Ordering instructions 6 Extensions for
More informationSuperhard Materials PCBN and PCD
Superhard Materials PCBN and PCD Superhard Tool Materials.........................................................B132 B173 Application Areas...........................................................B134
More informationA New Positive Multi Corners Milling Line
1/9 A New Positive ulti Corners illing Line 2/9 With the increasing popularity of small machining centers, TaeguTec is pleased to launch a new single-sided line of positive seven corners insert that generates
More information2890 Ligonier St. Latrobe, PA Phone Fax Toll Free
Your Best Choice For Carbide Components 2890 Ligonier St. Latrobe, PA 15650 Phone 724.532.3041 Fax 724.532.3043 Toll Free 800.862.7066 www.extramet.net OUR HISTORY OUR MISSION Extramet s Primary Objective
More informationMounted Points. Table of Contents 2 I 203. Power Tools Contents Page. Power Tools Contents Page
203 Table of Contents Power Tools Contents Page General Information 3 Your Quick Product Selection Guide 4-5 Peripheral Speeds, Safety Notes 6 Mounted Points Vitrified Bond, Aluminum Oxide, Hardness Grade
More informationTA202A: Introduction to. N. Sinha Department of Mechanical Engineering IIT Kanpur
TA202A: Introduction to Manufacturing Processes N. Sinha Department of Mechanical Engineering IIT Kanpur Email: nsinha@iitk.ac.in Processing Operations Alters a material s shape, physical properties,
More informationInsert Grades A1~A21 A2~A5. Summary of Insert Grades A6~A21. Insert Grades. Turning Small Tools Grooving / Cut-Off / Threading Drilling Milling
Summary of Turning Small Tools Grooving / Cut-Off / Threading Drilling Milling 1~21 2~5 2~3 3 4 5 5 Cermet PVD Coated Cermet CVD Coated (Turning) PVD Coated (Turning) PVD / CVD Coated (Milling / Drilling)
More informationTool Coatings TECHNICAL. TiN (Titanium ium Nitride) TiCN (Titanium Carbonitride) - Balinit FUTURA (Titanium Aluminum Nitride) Balinit X.
Tool Coatings TiN (Titanium ium Nitride) General purpose coating low heat resistance. Good lubricity. TiCN (Titanium Carbonitride) Good abrasion resistance. Recommended for aluminum, brass and bronze applications.
More informationRESPONSE SURFACE METHODOLOGY IN FINISH TURNING INCONEL 718
RESPONSE SURFACE METHODOLOGY IN FINISH TURNING INCONEL 718 M. Aruna 1 Department of Mechanical Engineering, Velammal College of Engineering and Technology, Madurai, India. Dr. V. Dhanalakshmi 2 Department
More information-CC-SUS. Features & Benefits. Revolutionary Technology
Features & Benefits Revolutionary Technology 1 www.osgtool.com 800.837.2223 Cutting Data Great consistency, reliability and long tool life Tool M6 x 1.0 Work Material 304 Stainless Tapping Speed 33 SFM
More informationInsert Series for Turning Application of Hard-to-cut Materials
/ / Insert Series for Turning Application of Hard-to-cut Materials VP2 Chip Breaker (For medium to finishing) Chip Breaker (For finishing) A Solution for Machining Hard-to-cut Materials PC8100 Series Exclusive
More informationPES INSTITUTE OF TECHNOLOGY BANGALORE SOUTH CAMPUS Hosur Road, (1K.M. Before Electronic City), Bangalore DEPARTMENT OF MECHANICAL ENGINEERING
PES INSTITUTE OF TECHNOLOGY BANGALORE SOUTH CAMPUS Hosur Road, (1K.M. Before Electronic City), Bangalore 560 100 DEPARTMENT OF MECHANICAL ENGINEERING SOLUTION 3 rd INTERNAL TEST Subject : Machine Tools
More informationCircular Thread Milling Tools in Solid Carbide
Circular Milling Tools in Solid Carbide Our Company Circular- and Milling Tools with Inserts (Single Point) PolyMI TriMI Circular Milling Tools with Inserts TrioCUT Circular Milling Tools in Solid Carbide
More informationIntroduction: Ferrous alloys - Review. Outline. Introduction: Ferrous alloys
Introduction: Ferrous alloys - Review Outline Introduction - Review - Ferritic SS - Austinitic SS - Matensitic SS - Precipitation Hardenable SS Cast Irons - Gray CI - Ductile CI - White CI - Malleable
More informationAUTOMOTIVE AND LARGE BORE ENGINE APPLICATIONS. Piston Rings and Piston Ring Elements Cast Iron Materials
UTOMOTIVE ND LRGE BORE ENGINE PPLICTIONS Issue date: 03.01 and Piston Ring Elements Cast Iron Materials Designation Reference Grade Hardness KS MED E DIN GOE 12 K 1 47 210 6621-3 unalloyed, non heat-treated
More informationIndexable Milling Products
Indexable illing roducts Our latest etalcutting Innovations are designed to deliver higher productivity, longer tool life, and increased application versatility. FACE ILL ee ection O for more details.
More informationLASER ASSISTED MACHINING OF ALUMINIUM COMPOSITE REINFORCED BY SIC PARTICLE Paper 1906
LASER ASSISTED MACHINING OF ALUMINIUM COMPOSITE REINFORCED BY SIC PARTICLE Paper 196 M. Kawalec 1, D. Przestacki 1, K. Bartkowiak 1-3, M. Jankowiak 1 1 Poznan Univ. of Technology, Institute of Mechanical
More informationThe best of both worlds
The best of both worlds CoroMill 210 the ultimate roughing cutter for modern machining techniques Use CoroMill 210 for plunge milling to mill away large volumes of metal or for high feed milling of flat
More informationELMAX SuperClean Uddeholm Elmax SuperClean
ELMAX SuperClean Uddeholm Elmax SuperClean REFERENCE STANDARD AISI WNr. JIS ASSAB DF-2 ARNE O1 (1.2510 (SKS 3 ASSAB DF-3 O1 (1.2510 (SKS 3 ASSAB XW-5 SVERKER 3 D6 (D3 (1.2436 (SKD 2 ASSAB XW-10 RIGOR A2
More informationMetric and Fractional Sizes
Metric and Fractional Sizes AQUA DRILL EX FLAT AQUA DRILL EX FLAT New Features on D/D/Extd. Length: 1) Double Margin 2) Corner Chamfer ) Added Stability & Tool Life 10º TRUE FLAT FACE AQUA DRILL EX FLAT
More informationSLOTTING ROUGHING DRILLING & RAMPING
SLOTTING ROUGHING DRILLING & RAMPING Shank HA/HB Solid carbide 4-fluted 36 /38 helix Face geometry for drilling and ramping nano-si -coating Cutting edge preparation Optimal chip space SLOTTING High process
More informationSistemska tehnika FORGED PRODUCTS FOR ALUMINIUM INDUSTRY
Sistemska tehnika FORGED PRODUCTS FOR ALUMINIUM INDUSTRY ST shells for continous strip casting Shells for continuous casting produced by Sistemska tehnika enable optimal casting speeds, maximal casted
More informationPRELIMINARY BROCHURE. Uddeholm Caldie
PRELIMINARY BROCHURE Uddeholm Caldie UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based
More informationa h a l l m a r k o f q u a l i t y
Premium hot-work tool steels a h a l l m a r k o f q u a l i t y s u r v e y o f h o t - w o r k s t e e l s Martensitic steels AISI Reference analysis Assupplied C Si Mn Cr Mo Ni V Co W Nb condition HB
More informationCompetence in solid carbide drilling
Product handbook Drilling _ THE TECHNOLOGY OF GAINING BENEFIT Competence in solid carbide drilling 2 General introduction to the subject 6 Programme overview 16 Product information 16 Solid carbide drills
More informationSteel Casting & Wear Resistant Material
Steel Casting & Wear Resistant Material INTERSCAN One Stop Industrial Solutions! About Interscan INTERSCAN was established by Mr. Tauqeer Ahmed in 1993, the company was committed to deliver clients the
More informationCNGA 432 W A P 0420B CB200
- Polycrystalline Cubic Boron Nitride Insert Nomenclature Chart CNGA 432 W A P 0420B ANSI standard nomenclature W Blank wiper flat Wiper No wiper A B C D E J K L M Q tip type Single ip Double ip riple
More informationMACHINABILITY AND TOOL WEAR DURING THE HIGH SPEED MILLING OF SOME HARDENED TOOL STEELS
MACHINABILITY AND TOOL WEAR DURING THE HIGH SPEED MILLING OF SOME HARDENED TOOL STEELS H.Chandrasekaran and U. Persson Swedish Institute for Metals Research Drottning Kristinas väg 48 114 28 Stockholm
More informationASSAB ASP 60. uddeholm
uddeholm Vanadis 60 REFERENCE STANDARD AISI DIN JIS DF-2 ARNE O1 1.2510 SKS 3 DF-3 O1 1.2510 SKS 3 XW-5 SVERKER 3 D6 (D3 (1.2436 (SKD 2 XW-10 RIGOR A2 1.2363 SKD 12 XW-41 SVERKER 21 D2 1.2379 SKD 11 XW-42
More informationExpansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts
MILLING JANUARY Page 1 / 8 Expansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts JANUARY Page 2 / 8 Highlights Milling cutters carrying a double-sided triangular insert with six 10 mm
More informationHighly Efficient Cutter with a 66 Cutting Edge Angle
Highly Efficient Cutter with a Cutting Edge Angle Highly Efficient Cutter with a Cutting Edge Angle Economical Inserts with 10 Cutting Edges. Reduces Chattering with Low Cutting Force Design Reduces Cutting
More informationEdition 5, The latest revised edition of this brochure is the English version, which is always published on our web site
UDDEHOLM SVERKER 3 This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty
More informationFLOMIN SOLID MINIATURE TOOLS. Solid threading and grooving tools for 0.6 mm minimum bore!
FLOMIN Solid threading and grooving tools or 0.6 mm minimum bore! w w w.to o l l o.c o m FLOMIN ACCELER ATED MACHINING FLOMIN Excellent cutting edge oers high precision machining or a wide range o internal
More informationMANUFACTURING PROCESSES. Tool Material & Cutting Fluid
MANUFACTURING PROCESSES Tool Material & Cutting Fluid 1 CUTTING TOOL MATERIAL Success in metal cutting depends on the selection of the proper cutting tool (material and geometry) for a given work material.
More informationSuperV-T. Solid Carbide Spiral-Flute Deep Hole Drills for drilling depths up to 30xD. NEW: Extended standard range. Chip by Chip to the Top
Stock SuperV-T Solid Carbide Spiral-Flute Deep Hole Drills for drilling depths up to 30xD NEW: Extended standard range Chip by Chip to the Top SuperV-T - ex-stock range Available ex-stock now: The spiral-flute
More informationQRO 90 SUPREME QRO 90 SUPREME
uddeholm QRO 90 SUPREME REFERENCE STANDARD AISI DIN JIS DF-2 ARNE O1 1.2510 SKS 3 DF-3 O1 1.2510 SKS 3 XW-5 SVERKER 3 D6 (D3 (1.2436 (SKD 2 XW-10 RIGOR A2 1.2363 SKD 12 XW-41 SVERKER 21 D2 1.2379 SKD 11
More informationGRINDING AND OTHER ABRASIVE PROCESSES
GRINDING AND OTHER ABRASIVE PROCESSES Grinding Related Abrasive Process Abrasive Machining Material removal by action of hard, abrasive particles usually in the form of a bonded wheel Generally used as
More informationDHC. Differential Helix Cutter
DHC Differential Helix Cutter Universal Short and Long End Mills for the Highest Productivity in Roughing and Finishing Applications (Standard & with Corner Radius) 2 x d 1 x d DHC (Differential Helix
More information