EMC- Shielding Products. Contact springs. SMD Contact Springs Board Level Shielding Cans Conductive Tapes

Size: px

Start display at page:

Download "EMC- Shielding Products. Contact springs. SMD Contact Springs Board Level Shielding Cans Conductive Tapes"

Sybil Peters
5 years ago
Views:

1 EMC- Shielding Products Contact Springs SMD Contact Springs oard Level Shielding Cans Conductive Tapes Therma ly Conductive Gaskets Fabric-/Foil over Foam Gaskets o low chamber-, Clip-on and EPDM-Gaskets Combi Gaskets (IP/EMC Gaskets) SMD Contact Springs Conductive Tapes oneycomb Vent Panels Conductive Foam EMC Connector Gasket oard Level Shielding Cans Shielded Windows Conductive Fabrics and Fleeces Conductive Elastomers Conductive Paint Knitted Wire Mesh Contact springs MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen Tel.: +49 (0)9071 / Fax: +49 (0)9071 / mtc.info@mtc.de Issue 2011

3 MTC- bout us MODERN COMPNY WIT LONG TRDITION specialist in the protection of electronic circuits and the environment from high frequency electromagnetic radiation, MTC develops, manufactures and sells high quality EMC shielding materials and ESD solutions. We use the very latest technologies and work with a network of efficient suppliers. 20 years of experience in the business, a sophisticated corporate culture and steady growth provide guarantees for long term, successful cooperation with our customers and partners. SFETY ND COMPETENCE MTC is proud of the continuously positive development of its order books. Specialized and motivated personnel with technical knowledge and a good understanding of the market (also together with specialist partner companies) provide support which is both practical and customer-focussed. The customer proximity, quality awareness and range of ideas of MTC personnel result in tailor-made, innovative solutions. MTC - GLOL PLYER Our head office is located in Dillingen (avaria). This is where you will find the appropriate contacts for commercial matters (customer service, sales administration, general administration) and technical support. The production and delivery of our goods are also controlled from here. We also have manufacturing sites in Germany and South Korea and a sales outlet in ong Kong. We provide services for the sian market from this base. FIR PRTNERSIP FROM TE VERY EGINNING Our customers can rely on our solutions being perfectly tailored to their wishes and needs. Normally we work with our customers from the early stages of projects and act as adviser from the birth of the idea to the mass produced product. STNDRD OR CUSTOMIZED SOLUTIONS Our product portfolio includes both an extensive range of standard products and products tailored for specific customer needs. Send us your ideas and your individual installation situation and we will find a solution for you quickly and at low cost. The MTC manufacturing sites in Germany and South Korea guarantee our customers fast reaction times for the development and supply of EMC materials. Flat organisational structures and our own production capacities enable MTC to achieve lead times of just a few days. MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 3 Subject to change without prior notice.

Conductive Tapes Our conductive tapes are supplied as standard with conductive adhesive and a protective cover. They are available in a range of designs.

4 Conductive Tapes Our conductive tapes are supplied as standard with conductive adhesive and a protective cover. They are available in a range of designs. Our customers can choose from the following materials: copper tin-plated copper aluminium metallized fabric and metallized fleece Depending on the customer s needs, the tapes can be supplied in a range of widths and lengths. Stampings are also possible to order. Tin-plated copper fleece foils can be supplied with mask. The mask acts as a protective cover for the conductive surface for powder coating applications. efore coating, the strip with the mask is positioned and afterwards the mask is removed with the coating on it. fter its removal, there is a conductive connection to the base plate and the plate is also protected against corrosion. Copper foils and tin-plated copper foils can be soldered. Our conductive tapes provide the following advantages: Other widths and lengths available vailable with electrically conductive adhesive Punched parts available according to customer s drawings cut to length / punched on roll Tin-plated for corrosion resistance Tin-plated copper- and fleece foils also available with mask 4 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

5 Conductive Tapes Copper tapes Technical data ase material : rolled copper foil Thickness: approx. 40 µ Thickness (incl. adhesive): approx. 70 µ dhesive tape: conductive dhesive strength:* 900 g/inch Surface resistivity:** < 0,5 (typ. 0,035) Ω/ Volume resistivity:** Temperature stability: < 0,1 (typ. 0,008) Ω/ approx. 80 C * according to KS 1107 ** according to JIS K 7194 Width Roll length Item number 10mm 33m RCU10 15mm 33m RCU15 20mm 33m RCU20 25mm 33m RCU25 50mm 33m RCU50 Tin-plated copper tapes Technical data ase material: tin-plated copper foil Thickness: approx. 35 µ Thickness (incl. adhesive): approx. 65 µ dhesive tape: conductive dhesive strength:* 4,5 N/cm Surface resistivity:** < 0,5 (typ. 0,035) Ω/ Volume resistivity:** Temperature stability: < 0,1 (typ. 0,008) Ω/ max. 150 C * according to KS 1107 ** according to JIS K 7194 Width Roll length Item number 6mm 33m RCU+SN6 8mm 33m RCU+SN8 10mm 33m RCU+SN10 12mm 33m RCU+SN12 15mm 33m RCU+SN15 20mm 33m RCU+SN20 25mm 33m RCU+SN25 30mm 33m RCU+SN30 50mm 33m RCU+SN50 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 5 Subject to change without prior notice.

6 Conductive Tapes luminium tapes Technical data ase material: aluminium foil Thickness: approx. 40 µ Thickness (incl. adhesive): approx. 70 µ dhesive tape: conductive dhesive strength:* 900 g/inch Surface resistivity:** < 0,5 Ω/ Volume resistivity:** Temperature stability: < 0,1 Ω/ approx. 80 C * according to KS 1107 ** according to JIS K 7194 Width Roll length Item number 6mm 50m RL6 10mm 50m RL10 15mm 50m RL15 25mm 50m RL25 30mm 50m RL30 50mm 50m RL50 60mm 50m RL60 6 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

Contact Springs Contact strips are used to close and shield gaps between two surfaces. For optimum shielding performance, the contact strip should be able to close the minimal and maximal gap.

7 Contact Springs Contact strips are used to close and shield gaps between two surfaces. For optimum shielding performance, the contact strip should be able to close the minimal and maximal gap. Contact strips are made of beryllium copper, a material that offers excellent spring characteristics in combination with a high material strength. Further advantages are corrosion resistance and self cleaning of contacts by opening and closing. eryllium copper is resistant against air, ozone, solvent, UV light and even against nuclear radiation. It can be used over a wide temperature range and shows excellent thermal and electric conductivity. In comparison to other EMI/RFI gaskets, contact strips are lighter and require less closing force. They are also inflammable and free from outgassing. The wide profile range in combination with several mounting methods creates an universal shielding gasket. The easiest mounting methods are clip-on and the type using a double sided pressures sensitive adhesive tape. Soldering or spot welding ensure very good grounding and contact. Generally the electrochemical reaction should be considered to avoid galvanic corrosion. In many cases it is recommended to use special surface treatment (i.e. tin plating) to get closer in the electrochemical potential chart. s standard contact strips are supplied in bright clean surface (copper). On request a surface finish like tin plating, zinc plating, nickel plating, silver plating, gold plating etc. can be applied. When using the correct compression force the contacts will not be damaged and thereby maintain their spring effect. MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 7 Subject to change without prior notice.

Of course we can also supply customized or modified standard contact strips. ased on a drawing or sketch and a description about the installation situation we quote a matching contact strip.

8 Contact Springs Please note: Contact strips can be cut to length on customer request. cut can only be done in the gap between the fingers. Due to manufacturing tolerances it is recommended to state the numbers of fingers rather than a given length. Our standard program already offers a huge variety of contact strips. Of course we can also supply customized or modified standard contact strips. ased on a drawing or sketch and a description about the installation situation we quote a matching contact strip. Surface material: blank...l gold plated...u silver plated...g satin tin plated...sn bright tin plating...sn dull nickel plating...ni bright nickel plating...ni clear chromate zinc plating...zn electroless nickel plating...eni Our contact springs offer the following advantages: Different surfaces available (e. g. blank, gold plated, silver plated, nickel plated, tin plated, zinc plated) Custom length available Example how to order: FC-311-L-406 = Standard strip type 311 in length of 406 mm with bright clean tin plated surface. 8 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

9 Contact Springs Stick-on Contact springs with adhesive tape FC-301 8,10 2,80 4,30 0,50 5,30 0, FC-302 9,40 3,30 5,70 0,60 5,30 0, FC ,20 5,60 8,70 0,80 7,10 0, / 497 FC ,80 8,10 8,70 1,00 11,20 0, FC ,90 10,20 11,70 1,00 19,80 0, FC-351 9,40 3,30 6,35 0,62 25,00 0,08 any FC C D T L FC-311 8,10 2,60 4,30 0,50 0, FC-312 9,40 3,30 5,70 0,60 0, FC ,20 5,60 3,90 0,80 0, FC ,20 5,60 8,70 0,80 0, FC-341 8,10 2,80 4,70 0,46 5,30 0,08 any FC ,20 5,60 9,50 0,80 7,10 0,08 any MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 9 Subject to change without prior notice.

10 Contact Springs Stick-on Contact springs with adhesive tape FC ,21 3,09 3,18 0,64 8,30 0,08 any FC ,20 3,70 3,18 0,64 8,30 0,08 any FC ,40 2,00 3,18 2,54 0, FC ,90 10,10 12,70 1,00 20,40 0,08 any FC ,70 3,30 6,50 0,50 8,72 0,08 any FC-401 7,10 2,80 4,31 0,46 0,07 406,40 FC-402 9,40 3,80 5,79 0,56 0,08 406,40 FC ,20 5,80 8,71 0,81 0,09 609,60 FC ,80 6,40 8,51 1,02 0,10 609,60 FC ,70 10,30 11,68 1,02 0,18 304,80 FC ,20 5,80 9,53 0,80 12,70 0,10 10 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) Subject to change without prior.

11 Contact Springs Stick-on Contact springs with adhesive tape FC C D T L FC-411 6,40 2,20 4,31 0,46 0,08 406,40 FC-412 9,70 3,10 4,31 0,46 0,08 406,40 FC ,00 3,80 5,79 0,56 0,08 406,40 FC ,30 5,80 8,71 0,81 0,10 609,60 FC-421 7,10 2,80 4,78 0,46 5,80 0,08 any FC-412 9,40 3,60 6,35 0,56 7,90 0,08 any FC-857 9,70 3,60 5,79 0,56 0, FC ,00 3,60 6,35 0,56 3,30 0,08 any FC ,30 5,80 9,53 0,80 3,38 0,10 any FC ,00 7,00 9,40 1,00 0,08 any MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 11 Subject to change without prior notice.

12 Contact Springs Clip-on Contact springs to clip on FC-101 6,60 1,40 5,60 0,80 0,80 0, / 500 FC-102 6,60 1,40 5,60 0,80 1,00 0, / 500 FC-104 6,60 1,40 5,60 0,80 1,50 0, / 500 FC-111 7,80 2,90 3,60 1,20 0,80 0, / 500 FC-112 7,80 2,90 3,60 1,20 1,00 0, / 500 FC-113 7,80 2,90 3,60 1,20 1,50 0, / 500 FC ,70 3,00 3,60 1,20 0,80 0, / 500 FC ,70 3,00 3,60 1,20 1,00 0, / 500 FC ,70 3,00 3,60 1,20 1,50 0, / 500 FC ,40 2,50 3,60 1,20 1,75 0, FC ,60 4,20 3,60 1,20 0,80 0, / 500 FC ,60 4,20 3,60 1,20 1,00 0, / 500 FC ,60 4,20 3,60 1,20 1,50 0, / 500 FC-176 7,80 3,30 4,62 1,18 0, FC-161 6,33 1,45 13,84 1,14 6,05 0, MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

Contact Springs Clip-on Contact springs to clip on FC-166 6,40 1,80 5,10 0,76 5,40 0,08 any FC-201 9,50 5,20 5,30 1,00 1,75 0,13 406 FC-211 10,70 6,30 3,20 1,50 2,00 0,13 406 / 500 FC-212 10,70 6,30

13 Contact Springs Clip-on Contact springs to clip on FC-166 6,40 1,80 5,10 0,76 5,40 0,08 any FC-201 9,50 5,20 5,30 1,00 1,75 0, FC ,70 6,30 3,20 1,50 2,00 0, / 500 FC ,70 6,30 8,00 1,50 2,00 0, / 500 FC ,70 3,00 5,70 0,60 1,25 0, FC ,70 3,00 5,70 0,60 1,50 0, FC ,25 5,40 8,70 0,80 1,50 0, MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 13 Subject to change without prior notice.

14 Contact Springs Clip-on Contact springs to clip on FC C D E T L FC ,00 8,50 1,00 2,00 0, / 500 FC C D T L FC ,80 6,35 6,35 0,76 0,10 any FC-866 9,70 6,35 1,02 0,127 any FC-171 6,90 2,80 1,90 0,64 5,60 0,15 any FC-181 6,20 3,00 6,32 0,72 4,70 0,10 any 14 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

Contact Springs Clip-on Contact springs to clip on FC-186 8,50 3,50 4,66 1,20 5,00 0,10 any FC-187 12,05 3,90 4,66 1,20 5,00 0,10 any FC-581 5,33 1,78 4,19 0,38 1,78 0,08 any FC C D T L FC-531 3,80

15 Contact Springs Clip-on Contact springs to clip on FC-186 8,50 3,50 4,66 1,20 5,00 0,10 any FC ,05 3,90 4,66 1,20 5,00 0,10 any FC-581 5,33 1,78 4,19 0,38 1,78 0,08 any FC C D T L FC-531 3,80 1,00 2,00 0,40 0, available with lances FC-532 3,80 1,50 2,00 0,40 0, available with lances FC-533 4,10 1,00 2,00 0,40 0, FC-534 4,10 1,50 2,00 0,40 0, FC-535 5,80 1,00 2,00 0,40 0, FC-536 5,80 1,50 2,00 0,40 0, MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 15 Subject to change without prior notice.

16 Contact Springs Special Mounting Contact springs to screw, to solder and to clinch FC-291 7,49 6,24 29,20 26,30 4,44 0,10 any FC C D T L FC-296 4,64 1,62 7,62 0,51 0,080 any FC-602 7,75 0,25 13,84 1,14 2,03 0,10 any FC C D L FC-603 4,70 2,60 3,00 1,00 up to 15 (C and D) FC C D E L FC ,18 9,53 1,02 2, MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

Contact Springs Clip-on Contact springs to clip on FC C D T L FC-821 11,40 2,00 3,18

L FC-863 9,07 8,00 0,15 25 MTC Micro Tech Components Gmb Lauinger Straße 16 D-89407

17 Contact Springs Clip-on Contact springs to clip on FC C D T L FC ,40 2,00 3,18 0,64 0, FC-261 9,70 8,64 6,35 1,00 1,60 1,10 any FC C FC-843 9,09 4,42 4,32 FC D T L FC-863 9,07 8,00 0,15 25 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 17 Subject to change without prior notice.

18 Contact Springs Special Mounting Contact springs to screw, to solder and to clinch FC C D T L FC-391 5,80 5,10 3,40 1,02 0,25 any FC ,70 6,30 9,53 1,02 6,00 0,08 any FC ,40 10,40 12,70 1,02 8,00 0,08 any FC ,40 10,40 12,70 1, FC ,70 6,40 9,53 1, FC ,27 11,50 11,50 1,02 0, FC-811 6,30 20,60 6,91 1,60 12,40 0, FC ,42 29,22 12,70 1,02 19,05 0, FC ,00 9,40 5,80 0,60 0, FC ,69 6,70 8,51 8,70 0, FC-823 2,80 7,10 4,78 0,46 5,70 0, FC ,75 28,70 12,70 1,02 19,05 0, FC ,23 9,40 5,79 0,56 0, FC-868 9,40 5,79 0,56 0,08 any 18 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

19 Contact Springs Special Mounting Contact springs to screw, to solder and to clinch FC C D T L FC-820 5,80 5,10 3,40 1,02 0,25 any FC-834 6,00 4,50 4,00 0,50 3,80 0,10 FC C D L FC ,79 14,60 10,50 1,50 406,00 FC ,10 6,60 8,95 8,95 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 19 Subject to change without prior notice.

20 Contact Springs Snap-in Contact springs to slide on (two legs) FC C D T L FC ,30 8,10 9,52 0,81 0,08 any FC-748 6,35 5,59 3,56 1,10 any FC ,00 3,88 5,30 0,70 0,07 any FC-732 7,60 3,30 4,75 0,43 2,10 0,08 any FC-736 8,13 2,79 4,75 0,46 2,16 0,08 any FC-739 9,40 3,30 6,35 0,63 2,16 0,08 any FC-761 7,87 3,05 6,35 0,50 2,28 0,08 any FC-762 8,90 2,80 4,75 0,46 3,40 0,08 any FC-763 8,90 3,20 4,75 0,46 3,20 0,08 any FC-771 8,25 2,57 4,75 0,46 2,16 0,08 any FC-781 5,00 2,00 3,20 0,50 1,60 0,08 any FC ,24 5,59 6,35 0,81 0, FC-828 9,40 3,60 4,50 0, MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

Contact Springs Snap-in Contact springs to slide on (two legs) FC-791 8,12 2,80 4,76 0,46 4,10 0,08 any FC-792 9,40 3,30 4,76 0,45 0,08 any FC-867 9,40 3,60 5,20 0,70 0,08 any FC-870 15,24 5,59 7,16

21 Contact Springs Snap-in Contact springs to slide on (two legs) FC-791 8,12 2,80 4,76 0,46 4,10 0,08 any FC-792 9,40 3,30 4,76 0,45 0,08 any FC-867 9,40 3,60 5,20 0,70 0,08 any FC ,24 5,59 7,16 0,81 8,24 0,08 any FC C D T L FC-846 4,70 1,65 6,50 6,03 0,06 138,06 D C FC C D L FC ,00 7,50 6,50 0,85 35,90 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 21 Subject to change without prior notice.

22 Contact Springs Twisted contact FC C D T L FC-504 8,60 1,78 3,80 0,40 0,076 any FC-571 5,90 0,80 2,42 0,38 0,080 any FC-505 4,80 1,78 3,80 0,40 3,80 0, FC-524 3,60 0,80 2,00 0,40 2,00 0, FC-506 4,80 1,78 3,80 0,40 3,80 0, FC-837 5,10 1,80 4,19 0,38 2,80 0, MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

Contact Springs Twisted contact FC C D T L FC-510 12,70 1,78 3,80 0,40 0,076 endless FC-511 4,80 1,78 3,80 0,40 1,00 0,076 406 FC-512 4,80 1,78 3,80 0,40 1,50 0,076 406 FC-513 4,80 1,78 3,80 0,40

23 Contact Springs Twisted contact FC C D T L FC ,70 1,78 3,80 0,40 0,076 endless FC-511 4,80 1,78 3,80 0,40 1,00 0, FC-512 4,80 1,78 3,80 0,40 1,50 0, FC-513 4,80 1,78 3,80 0,40 2,00 0, FC-514 6,40 1,78 3,80 0,40 1,00 0, FC-515 6,40 1,78 3,80 0,40 1,50 0, FC-516 6,40 1,78 3,80 0,40 2,00 0, FC-531 3,80 0,80 2,00 0,40 3,00 0, available with lances FC-532 3,80 0,80 2,00 0,40 2,50 0, available with lances FC-533 4,10 0,80 2,00 0,40 4,00 0, FC-534 4,10 0,80 2,00 0,40 3,50 0, FC-535 5,80 0,80 2,00 0,40 4,00 0, FC-536 5,80 0,80 2,00 0,40 3,50 0, FC-582 3,80 1,78 2,41 0,38 0,76 0, MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 23 Subject to change without prior notice.

SMD Contact Springs Our SMD contact springs can be supplied in a very wide range of dimensions and shapes. Our standard range includes a large number of different spring types in heights from 1.

24 SMD Contact Springs Our SMD contact springs can be supplied in a very wide range of dimensions and shapes. Our standard range includes a large number of different spring types in heights from 1.5 mm to 13 mm. Do you require a different design or a different size than those in our standard range? Depending on your requirements and your installation situation we can also supply you with customized SMD springs at low tooling costs and part prices. Our technical personnel will be delighted to help you if you have any questions or require advice in the design and development support phase. We can supply you with drawings of our SMD contact springs in STEP or IGES format free of charge on request. Characteristics and Features The standard base material used for our SMD contact springs is copperberyllium (Cue). To order, however, we can also use other materials such as stainless steel or phosphorus bronze. Copper-beryllium is easy to work and is resistant to corrosion and abrasion. Even high temperatures and temperature fluctuations or high mechanical stresses have no influence on its excellent connection properties. In addition, Cue is extraordinarily elastic and can withstand a great deal more bending than a steel spring, for example. Normally our SMD springs are gold-plated since, with the exception of royal water (a mixture of hydrochloric acid and nitric acid), acids are not aggressive towards gold and therefore gold provides excellent corrosion protection. In addition the gold-plated surface is ideal for soldering. Naturally other finishes (for example tin or nickel) can be supplied to order. 24 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

25 SMD Contact Springs SMD contact springs are fail-safe and very resistant. They also have an almost unlimited service life. Typical applications of SMD contact springs SMD springs are ideal for the automatic assembly of printed circuit boards. They are supplied in bulk form or in belts which means that the SMD contact springs are perfect for mass production using standard assembly units. SMD contact springs are exclusively soldered on to printed circuit boards. They are particularly useful for the following: to make contact between the PC s earth and the housing, to make a low ohm F connection between the earthing points of two PCs positioned one on top of the other, to earth cooling units on a high frequency basis, to connect signal and power supply cables between two PCs positioned one on top of the other, to connect the PC and elements which are not on the PC (for example an embedded antenna) or to create external connections. Please note: Replace XX in the item number by the desired surface plating. Standardly, SMD springs are gold-plated. Other platings are possible: gold-plated...u tin-plated...sn zinc-plated...zn MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 25 Subject to change without prior notice.

26 SMD Contact Springs Type 1 Item number FC-01CG XX-SMD 3,50 4,50 2,50 FC-01CG XX-SMD 3,60 4,50 2,50 FC-01CG XX-SMD 4,00 3,00 2,00 FC-01CG XX-SMD 4,50 4,80 2,50 FC-01CG XX-SMD 4,80 4,50 2,00 Type 2 Item number FC-02CG XX-SMD 1,50 2,70 1,50 FC-02CG XX-SMD 2,00 3,80 2,00 Type 3 Item number FC-03CG XX-SMD 1,50 3,20 1,50 FC-03CG XX-SMD 1,50 3,20 2,00 FC-03CG T-XX-SMD 2,00 2,70 1,50 FC-03CG XX-SMD 2,10 4,00 2,00 FC-03CG XX-SMD 3,50 3,20 2,00 FC XX-SMD 3,60 5,00 2,50 FC XX-SMD 4,00 3,00 2,00 FC XX-SMD 4,29 4,10 2,50 FC XX-SMD 4,50 4,95 2,00 FC-03CG XX-SMD 4,80 6,20 2,50 FC-03CG XX-SMD 5,50 4,00 2,00 FC XX-SMD 5,50 7,00 2,50 Type 4 Item number FC-04CG XX-SMD 3,50 4,30 2,50 FC-047G XX-SMD 5,00 4,00 2,50 FC-04CG XX-SMD 5,00 4,30 2,50 FC-04CG XX-SMD 5,30 4,00 2,00 FC-044G XX-SMD 5,40 4,00 2,50 FC-04CG XX-SMD 6,00 6,00 2,00 26 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de Subject to change without prior.

27 SMD Contact Springs Type 5 Item number FC-05CG XX-SMD 3,50 3,50 2,00 FC-05CG XX-SMD 4,00 3,00 2,50 FC-05CG XX-SMD 5,00 4,00 2,50 FC-05CG XX-SMD 5,70 4,70 2,00 Type 6 Item number FC-063G XX-SMD 7,00 4,80 2,50 FC-063G XX-SMD 9,00 7,00 2,50 FC-063G XX-SMD 10,00 6,00 3,00 Type 7 Item number FC XX-SMD 1,95 4,00 2,20 FC-07CG XX-SMD 2,20 4,00 2,20 Type 8 Item number FC-085G XX-SMD 2,50 3,00 2,00 Type 9 Item number FC-09CG XX-SMD 5,00 5,80 2,00 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 27 Subject to change without prior notice.

28 SMD Contact Springs Type 10 Item number FC-10CG XX-SMD 4,80 4,50 2,50 FC-10CG XX-SMD 5,50 4,00 2,50 FC-10CG XX-SMD 6,00 4,00 2,50 Type 11 Item number FC-11SG XX-SMD 3,10 3,00 2,00 FC-11SG XX-SMD 3,60 3,00 2,00 Type 12 Item number FC-12ZG XX-SMD 2,20 2,70 1,30 FC-12ZG XX-SMD 2,20 2,70 2,00 FC-12ZG XX-SMD 2,50 3,50 1,80 Type 13 Item number FC-13ZG XX-SMD 3,20 3,70 1,20 28 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) Subject to change without prior.

29 SMD Contact Springs Type 14 Item number FC-14XG XX-SMD 4,00 3,50 2,50 Type 15 Item number FC-158G XX-SMD 3,70 4,00 2,00 FC-158G XX-SMD 4,50 4,50 2,00 FC-158G XX-SMD 6,20 7,00 2,50 FC-158G XX-SMD 7,50 7,00 2,50 FC-158G XX-SMD 9,00 7,00 2,50 FC-158G XX-SMD 10,00 7,00 2,50 FC-158G XX-SMD 13,00 9,00 2,50 Type 16 Item number FC-16SG XX-SMD 7,00 4,50 2,00 FC-16SG XX-SMD 8,00 6,50 2,50 FC-16SG XX-SMD 12,00 7,00 2,50 FC-16SG XX-SMD 13,00 7,00 2,50 Type 17 Item number FC-173G XX-SMD 2,50 3,00 2,00 FC-173G XX-SMD 3,00 3,00 2,00 FC-173G XX-SMD 3,50 3,00 2,00 FC-173G XX-SMD 4,20 3,50 2,00 FC-173G XX-SMD 6,20 3,80 2,00 FC-173G XX-SMD 7,00 4,50 2,00 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) Subject to change without prior notice.

30 SMD Contact Springs Type 18 Item number FC-185G XX-SMD 6,00 4,50 2,50 Type 19 Item number FC-198G XX-SMD 5,10 4,00 3,00 Type 20 Item number FC-205G XX-SMD 3,10 3,00 2,00 FC-205G XX-SMD 4,10 4,00 2,50 FC-205G S-XX-SMD 4,20 3,50 2,00 FC-205G XX-SMD 6,20 7,00 2,00 Type 21 Item number FC-21CG S-XX-SMD 2,80 2,88 2,00 FC-21ZG S-XX-SMD 3,40 3,50 1,40 FC-21ZG XX-SMD 3,50 3,80 2,50 FC-21ZS XX-SMD 4,00 4,40 2,80 FC-21ZG XX-SMD 4,00 5,00 3,00 FC XX-SMD 4,00 5,00 3,00 FC-21ZS XX-SMD 4,07 4,40 2,80 FC XX-SMD 5,50 5,00 3,00 FC-213G XX-SMD 7,00 4,80 2,50 FC XX-SMD 7,00 5,00 3,00 FC XX-SMD 7,50 5,00 3,00 Type 22 Item number FC-22CG XX-SMD 4,00 6,00 2,00 30 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) Subject to change without prior.

oard Level Shielding Cans oard Level Shielding Cans are used whenever it makes sense or is necessary to shield individual components or assemblies separately on the actual PC.

Shielding Cans made of a range of materials (for example cold rolled steel tin plated, stainless steel, german silver) can be used for this purpose.

31 oard Level Shielding Cans oard Level Shielding Cans are used whenever it makes sense or is necessary to shield individual components or assemblies separately on the actual PC. This is often necessary in the following situations: to comply with current EMC laws relating to outgoing and incoming radiation and / or to guarantee the safe function of the assembly oard Level Shielding Cans made of a range of materials (for example cold rolled steel tin plated, stainless steel, german silver) can be used for this purpose. The common material for LS is cold roll tin plated steel. These shielding housings are mounted on the PC using either TT or SMD technology. esides standard oard Level Shields MTC can also supply EMC shielding housings which are specially designed to your specifications. Whether they are for prototypes or for mass production, in small or large quantities, shielding covers are a low cost way of providing a direct shield for your printed circuit board to prevent EMC radiation. Please note: Replace -XX in the item number by the desired material: CRS-SN = cold rolled steel tin plated V = stainless steel GS = german silver (nickel silver) Please replace -X by D, if you need a lid Z, if you need a fence Example item number: SG-22,37x21,28x2,25-GS-D MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 31 Subject to change without prior notice.

32 oard Level Shielding Cans Standard oard Level Shielding Cans Our standard oard Level Shields are two-part SG-15,84x20,70x2,25-XX-X SG-21,10x16,24x1,40-XX-X SG-18,49x19,71x2,25-XX-X SG-18,89x20,11x1,40-XX-X SG-22,37x21,28x2,25-XX-X SG-18,89x20,11x1,40-XX-X 32 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) Subject to change without prior.

Certificates If you choose MTC as your supplier you will benefit not only from our flexibility and our competitive prices but also from our long lasting experience and professionalism.

MTC has detected this early and was one of the first providers with appropriate solutions. Therefore all our products are without exception RoS compliant.

33 Certificates If you choose MTC as your supplier you will benefit not only from our flexibility and our competitive prices but also from our long lasting experience and professionalism. s a matter of course we are an ISO 9001:2008 and ISO 14001:2005 certified company. The ratification of the relevant regulations ROS / WEEE is an important issue in our industry. MTC has detected this early and was one of the first providers with appropriate solutions. Therefore all our products are without exception RoS compliant. Of course, we also look at the RoS compliance of our suppliers. UL certification is mandatory for many of our customers for the worldwide sale of their products. ere you can rely on MTC. Our products are, as far as possible, tested according to UL 94. We are ready to send you all required information so that you can verify this at UL. For MTC this transparency is a matter of course! MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen +49 (0) mtc.info@mtc.de 33 Subject to change without prior notice.

34 MTC Micro Tech Components Gmb Lauinger Straße 16 D Dillingen Tel.: +49 (0)9071 / Fax: +49 (0)9071 / mtc.info@mtc.de

mtc an acal group company Thermally Conductive Products

mtc an acal group company Thermally Conductive Products mtc MTC About us Features MODERN COMPANY WITH LONG TRADITION MTC is specialized on the protection of electronic circuits and the environment from high frequency electromagnetic radiation. Therefore we