solutions for industrial weighing HEAVY WEIGHBRIDGES
|
|
- Arthur Hilary Shields
- 5 years ago
- Views:
Transcription
1 solutions for industrial weighing HEAVY WEIGHBRIDGES 014
2 Solutions for industrial weighing solutions for industrial weighing Pol. Empordà Internacional - C/de Molló, VILAMALLA (Girona) España T F giropes@giropes.com 2 catalog 2014
3 Solutions for industrial weighing INDEX Weighbridges BPGSM 4 BPPCE 5 BPBSH 6 BPPSE 7 BPCTH 8 Railway weighbridge, dumper weighbridge and axle weighing scale for dumper 9 Digital cells GIPD and HBM C16i 10 Accessories HBM Scale with analogical cells, C16 model of HBM 11 PSC Weighbridge supply 11 PSC With top sheets for Toledo cells MTX or PDX 11 PSC With bottom sheets for Toledo cells MTX 11 PSC With bottom sheets for Toledo cells PDX 11 CBV Cells installed under beam for BPGSMX/BPGSH 11 CVS-CV8C Simple and large cubicles for BPPCE/BPPSE 12 RP Metal ramps for BPGSM/BPPCE/BPBSH/BPPSE/BPCTH 12 AR Perimeter angle for construction ramps 12 APF Perimeter angle for the ending of the ditch 12 GM Rubber to pit 13 GR Bearing guides for on-ground scales 13 3 catalog 2014
4 BPGSM standard width of 3m > > Metal weighbridge. > > Unidirectional. > > On-ground installing. > > HIGH use. > > Dimensions: With 8 load cells 18x3 m, 17,5x3 m, 16x3 m, 14x3 m. Maximum nominal capacity: kg and kg > > Height of the rotating area: For scales of 80 t: 330 mm. For scales of 100 t: 360 mm. > > Flat sheet surface. Thick: For scales of 80 t: 10 mm. For scales of 100 t: 12 mm. > > Longitudinal beam: For scales of 80 t: IPE450. For scales of 100 t: IPE500. > > Necessary access ramps with a slope of 10%. > > Painting: two component polyurethane paint in blue colour RAL > > Screwing of quality 8.8 in zinc (except in screws inferior to M14). > > The scales of 14, 16 and 17,5 m. of length can be sent in a 20' Open Top container. For the scales of 18 m. of length it's necessary a 40' Open Top container. load cells GIP load cell > > Stainless steel. IP68. > > 3000 d OIML R60. Load cells for scales of 8 cells: > > GIP model of 30 t. > > GIP model of 40 t. ELECTRONIC > > Metal connection box of 8 connections depending on the dimensions of the scale, with power meters. IP65 Protection. > > 15 m of cable connection from the scale to the indicator. > > It is advisable the installation of an earthed landing following instructions M.I.BT039 (not included). OPTIONS AND ACCESSORIES Digital load cells > > Cells GIPD. See the page 10. > > Cells HBM C16i. See the page 10. Accessories for the assembly > > Perimeter angle for the ramps (in and out of on-ground scales). > > Metal ramps. OTHER AVAILABLE ACCESSORIES LOOK AT PAGE 11 POSSIBLE INDICATORS Weight-Tare Alphanumerical > > GI308 > > GI511PP > > BV510 > > GI500I > > GI200 > > GI500SS Dimensions Capacity Number of cells Height (mm) with GIP cells 14x3 m 80 t BPGSM.14-GIP 80 16x3 m 80 t BPGSM.16-GIP 80 17,5x3 m 80 t BPGSM.17,5-GIP 80 18x3 m 80 t BPGSM.18-GIP 80 14x3 m 100 t BPGSM.14-GIP x3 m 100 t BPGSM.16-GIP ,5x3 m 100 t BPGSM.17,5-GIP x3 m 100 t BPGSM.18-GIP 100 Note: the references do not include the indicator ACCESSORIES Additional meter of cable. Root plates for the scales with 8 load cells. CC.6 PA.8 4 catalog 2014
5 BPPCE > > Modular metal weighbridge. > > Omnidirectional. > > On-ground and pit assembly. > > Regimen of use MEDIUM. > > Dimensions: With 8 load cells 18x3 m, 16x3 m and 14x3 m. Maximum nominal capacity: kg and kg > > Height of the rotating area: For scales of 80 t: 310 mm. For scales of 100 t: 360 mm. > > Tear sheet surface of 6/8 mm thick. > > Necessary access ramps with a slope of 10%. > > Painting: two component polyurethane paint in blue colour RAL > > Screwing of quality 8.8 in zinc (except screws inferior M14). > > It can be sent two scales BPPCE in a 20-open-top container. load cells GIP load cell > > Stainless steel. IP68. > > 3000 d OIML R60. Load cells for scales of 8 cells: > > GIP model of 30 t. > > GIP model of 40 t. ELECTRONIC > > Metal connection box of 8 connections depending on the dimensions of the scale, with power meters. IP65 Protection. > > 15 m of cable connection from the scale to the indicator. > > It is advisable the installation of an earthed landing following instructions M.I.BT039 (not included). OPTIONS AND ACCESSORIES Digital load cells > > Cells GIPD. See the page 10. > > Cells HBM C16i. See the page 10. Accessories for the assembly. > > Perimeter angle for the ramps (in and out of on-ground scales). > > Perimeter angle for the ending of the ditch (pit scales). > > Metal ramps, of 1000 mm of thickness. > > Metal ramps, of 1500 mm of thickness. Cubicles for BPPCE > > Simple cubicle > > Large cubicle (with cells assembled in the factory). Accessories for the structure. > > Bearing guides. OTHER AVAILABLE ACCESSORIES LOOK AT PAGE 11 POSSIBLE INDICATORS Weight-Tare Alphanumerical > > GI308 > > GI511PP > > BV510 > > GI500I > > GI200 > > GI500SS Dimensions Capacity Number of cells Height (mm) with GIP cells 14 x 3 m 80 t BPPCE.14.GIP x 3 m 80 t BPPCE.16.GIP x 3 m 80 t BPPCE.18.GIP x 3 m 100 t BPPCE.14.GIP x 3 m 100 t BPPCE.16.GIP x 3 m 100 t BPPCE.18.GIP 100 ACCESSORIES Additional meter of cable. Root plates for the scales with 8 load cells. CC.6 PA.8 5 catalog 2014
6 BPBSH > > Modular concrete weighbridge. > > Unidirectional. > > On-ground installing. > > HIGH use. > > Dimensions: With 8 load cells 18x3 m, 17,5x3 m, 16x3 m, 14x3 m. Maximum nominal capacity: kg and kg > > Height of the rotating area: For scales of 80 t: 370 mm. For scales of 100 t: 400 mm. > > Longitudinal beam: For scales of 80 t: IPE450. For scales of 100 t: IPE500. > > Necessary access ramps with a slope of 10%. > > Painting: two component polyurethane paint in blue colour RAL > > Screwing of quality 8.8 in zinc (except in screws inferior to M14). > > With plastic formwork. > > The weighbridge rebar reinforcement is supplied with the weighbridge. > > The scales of 14, 16 and 17,5 m. of length can be sent in a 20' Open Top container. For the scales of 18m. of length it's necessary a 40' Open Top container. load cells GIP load cell > > Stainless steel. IP68. > > 3000 d OIML R60. Load cells for scales of 8 cells: > > GIP model of 30 t. > > GIP model of 40 t. ELECTRONIC > > Metal connection box of 8 connections depending on the dimensions of the scale, with power meters. IP65 Protection. > > 15 m of cable connection from the scale to the indicator. > > It is advisable the installation of an earthed landing following instructions M.I.BT039 (not included). OPTIONS AND ACCESSORIES Digital load cells. > > Cells GIPD. See the page 10. > > Cells HBM C16i. See the page 10. Accessories for the assembly. > > Perimeter angle for the ramps (in and out of on-ground scales). > > Metal ramps. OTROS ACCESSORIES DISPONIBLES. CONSULTAR A PARTIR DE LA PÁGINA 11. POSSIBLE INDICATORS Weight-Tare Alphanumerical > > GI308 > > GI511PP > > BV510 > > GI500I > > GI200 > > GI500SS Dimensions Capacity Number of cells Height (mm) with GIP cells 14 x 3 m 80 t BPBSH.14-GIP x 3 m 80 t BPBSH.16-GIP 80 17,5 x 3 m 80 t BPBSH.17,5-GIP x 3 m 80 t BPBSH.18-GIP x 3 m 100 t BPBSH.14-GIP x 3 m 100 t BPBSH.16-GIP ,5 x 3 m 100 t BPBSH.17,5-GIP x 3 m 100 t BPBSH.18-GIP 100 Note 1: the references do not include the concrete on the platform. Note 2: the references do not include the indicator. ACCESSORIES Additional meter of cable Root plates for the scales with 8 load cells. CC.6 PA.8 6 catalog 2014
7 BPPSE > > Modular concrete weighbridge. > > Omnidirectional. > > On-ground and pit assembly. > > Regimen of use MEDIUM. > > Two diferent versions: Standard version (BPPSE) Version with metal formwork (BPPSEC) > > Dimensions: With 8 load cells 18x3 m, 16x3 m and 14x3 m. Maximum nominal capacity: kg and kg > > Height of the rotating area: For scales of 80 t: 310 mm. For scales of 100 t: 360 mm. > > Necessary access ramps with a slope of 10%. > > Painting: two component polyurethane paint in blue colour RAL > > Screwing of quality 8.8 in zinc (except screws inferior M14). > > The weighbridge rebar reinforcement is supplied with the weighbridge. > > It can be sent two scales BPPCE in a 20-open-top container. bppse VERSIONS > > BPPSE Standard version. This scale is served along with a plastic for formwork concrete pouring. The structure is mounted and the concrete is poured into the cast on the floor and once the concrete dries and completely hardens it can be lifted completely. > > BPPSEC Version with metal formwork. This version is supplied with metal formwork welded to the platform for concrete pouring. The weighbridge can be concreted mounted on its final height. Détail d'un module longitudinal avec coffrage métallique. load cells GIP load cell > > Stainless steel. IP68. > > 3000 d OIML R60. Load cells for scales of 8 cells: > > GIP model of 30 t. > > GIP model of 40 t. ELECTRONIC > > Metal connection box of 8 connections depending on the dimensions of the scale, with power meters. IP65 Protection. > > 15 m of cable connection from the scale to the indicator. > > It is advisable the installation of an earthed landing following instructions M.I.BT039 (not included). OPTIONS AND ACCESSORIES Digital load cells. > > Cells GIPD. See the page 10. > > Cells HBM C16i. See the page 10. Accessories for the assembly. > > Perimeter angle for the ramps (in and out of on-ground scales). > > Perimeter angle for the ending of the ditch (pit scales). > > Metal ramps, of 1000 mm of thickness. > > Metal ramps, of 1500 mm of thickness. Cubicles for BPPSE > > Simple cubicle > > Large cubicle (opcional with cells assembled in the factory). Accessories for the structure. > > Bearing guides. OTHER AVAILABLE ACCESSORIES LOOK AT PAGE 11 POSSIBLE INDICATORS Weight-Tare Alphanumerical > > GI308 > > GI511PP > > BV510 > > GI500I > > GI200 > > GI500SS BPPSE BPPSEC Dimensions Capacity Number of cells Height (mm) with GIP cells with GIP cells 14x3 m 80 t BPPSE.14.GIP 80 BPPSEC.14.GIP 80 16x3 m 80 t BPPSE.16.GIP 80 BPPSEC.16.GIP 80 18x3 m 80 t BPPSE.18.GIP 80 BPPSEC.18.GIP 80 14x3 m 100 t BPPSE.14.GIP 100 BPPSEC.14.GIP x3 m 100 t BPPSE.16.GIP 100 BPPSEC.16.GIP x3 m 100 t BPPSE.18.GIP 100 BPPSEC.18.GIP 100 ACCESSORIES Additional meter of cable. Root plates for the scales with 8 load cells. CC.6 PA.8 7 catalog 2014
8 BPCTH width of 3,30 m > > Concrete weighbridge. > > Unidirectional. > > On-ground installing. > > HIGH use. > > Dimensions: With 8 load cells 18x3,30 m, 16x3,30 m. and 14x3,30 m. Maximum nominal capacity: kg and kg > > Height of the rotating area: For scales of 80 t: 370 mm. For scales of 100 t: 400 mm. > > Treat surface completely flat, without laterañ beams as guide. > > Composed by 3 concrete modules inside an IPE frame: For scales of 80 t: IPE-300. For scales of 100 t: IPE-330. > > Lonitudinal and transversal ø20 mm. rebars to avoid the beams opening. > > Doble inferior layer of rebar mesh of 150x150xø10 and one superior layer of 150x150xø5. > > Necessary access ramps with a slope of 10%. > > Painting: two component polyurethane paint in blue colour RAL > > Screwing of quality 8.8 in zinc (except in screws inferior to M14). > > With plastic formwork. > > The weighbridge rebar reinforcement is supplied with the weighbridge. load cells GIP load cell > > Stainless steel. IP68. > > 3000 d OIML R60. Load cells for scales of 8 cells: > > GIP model of 30 t. > > GIP model of 40 t. ELECTRONIC > > Metal connection box of 8 connections depending on the dimensions of the scale, with power meters. IP65 Protection. > > 15 m of cable connection from the scale to the indicator. > > It is advisable the installation of an earthed landing following instructions M.I.BT039 (not included). OPTIONS AND ACCESSORIES Digital load cells. > > Cells GIPD. See the page 10. > > Cells HBM C16i. See the page 10. Accessories for the assembly. > > Perimeter angle for the ramps (in and out of on-ground scales). > > Metal ramps. OTROS ACCESSORIES DISPONIBLES. CONSULTAR A PARTIR DE LA PÁGINA 11 POSSIBLE INDICATORS Weight-Tare Alphanumerical > > GI308 > > GI511PP > > BV510 > > GI500I > > GI200 > > GI500SS Dimensions Capacity Number of cells Height (mm) with GIP cells 14 x 3,30 m 80 t BPCTH.14-GIP x 3,30 m 80 t BPCTH.16-GIP x 3,30 m 80 t BPCTH.18-GIP x 3,30 m 100 t BPCTH.14-GIP x 3,30 m 100 t BPCTH.16-GIP x 3,30 m 100 t BPCTH.18-GIP 100 Note 1: the references do not include the concrete on the platform. Note 2: the references do not include the indicator. ACCESSORIES Additional meter of cable Root plates for the scales with 8 load cells. CC.6 PA.8 8 catalog 2014
9 Railway weighbridge, dumpers weighbridge and axle weighing scale for dumpers RAILWAY WEIGHBRIDGE > > The Giropès railway weighbridge can be made completely in metal or mixed (metal and concrete). > > They are installed under the rails. > > Our scales are studied to obtain a resistance in hard loads of work. > > To offer the maximum of possibilities for all kind of coaches, Giropès makes different measures of railway weighbridges. With a simple or double scales depending of coach structure to weigh. Consult us for further information and/or to receive the product price. DUMPERS WEIGHBRIDGE > > The Giropès dumpers weighbridge can be made completely in metal or mixed (metal and concrete). > > It can be installed on-ground or pit. > > Each scale are designed depending on kind of dumpers to be controlled, considering that it's necessary to adapt the structure to the client machinery. > > Giropès makes dumpers weighbridges with capacitites of 60 t to 400 t. Dimensions are calculated depending on the dumper of the client. Consult us for further information and/or to receive the product price. AXLE WEIGHING SCALE FOR DUMPERS > > The Giropès axle weighing scale for dumpers are made completely in metal to be installed pit. > > They allow the distribution of the loads to the different axles. > > It's possible to weigh in static or dynamic mode (at low speed). > > Giropès makes axle weighing scales for dumpers of 40 t to 400 t. The dimensions will change depending on each dumper, therefore the scale will be made depending on the dumper to be controlled. Consult us for further information and/or to receive the product price. 9 catalog 2014
10 digital cells GIPD and HBM C16i GIPD > > Digital load cell with compression of selfaligning pivotal column. > > Capacities of 15 t, 30 t and 40 t. > > 4000 divisions OIML R60. > > Building in stainless steel. > > Hermetically welded, protection IP68 (EN60529). All the weighbridges can use digital cells GIPD with the indicator GI500. > > Protected against lighting. > > Digital output RS-485. > > Software setting and updating through the interface series. > > Advantages in starting, adjustment of corners and individual diagnostic. Indicator GI500 > > Electronic indicator to use with digital weighing. > > Follows the rules. > > EN > > Graphic Display. > > Stainless steel housing. > > Excitation through red adaptor, integrated in the housing. > > Alphanumerical keyboard of membrane. Software Functions > > Zero. > > Tare. > > Date/Hour. > > Password. > > s File. > > Number plate Files. > > Management of weighing. > > Memorized Tares. > > Management in ways of traffic. > > PC connection. > > Printing with external printer. > > Badge / button. > > Control of traffic lights. > > I/O. > > Aliby Memory. > > Ethernet. > > Programming of input and output conditions. Combination of digital elements Digital cells GIPD model with the indicator GI500. For scales of 8 cells. GIPD.8 The indicated references must be added to the total list of all scales with GIP references that agree with the number of load cells. HBM C16i > > Digital load cell with compression of selfaligning pivotal column. > > Capacities of 20 t, 30 t and 40 t. > > 3000 divisions OIML R60. > > Built in stainless steel. > > Welded with laser, IP68 protection. > > Protection against voltage overload. All the weighbridges can use digital cells HBM C16i with the indicator GI500. > > Digital output RS-485. > > Software setting and updating through the interface series. > > Advantages in starting, adjustment of corners and individual diagnostic. > > Follows the EMC/ESD requirements according to EN Indicator GI500 > > Electronic indicator to use with digital weighing > > It follows rules EN > > Graphic display. > > Stainless steel housing > > Excitation through red adaptor, integrated in the housing. > > Alphanumerical keyboard of membrane. Software Functions > > Zero. > > Tare. > > Date/Hour. > > Password. > > s File. > > Number plate Files. > > Management of weighing. > > Memorized Tares. > > Management in ways of traffic. > > PC connection. > > Printing with external printer. > > Badge / button. > > Control of traffic lights. > > I/O. > > Aliby Memory. > > Ethernet. > > Programming of input and output conditions. Combination of digital elements Digital cells HBM C16i model with the indicator GI500. For scales of 8 capteurs. C16i-GI500.8 The indicated references must be added to the total list of all scales with GIP references that agree with the number of load cells. 10 catalog 2014
11 OPTIONS AND ACCESSORIES HBM SCALE WITH ANALOGICAL CELLS, C16 model of HBM Increase to supply the scale with HBM analogical cells (C16A model) instead of GIP cells. For scales of 8 load cells. HBM-8 PSC WEIGHBRIDGE SUPPLY Decrease to supply the scale without: - Cells - Set of hoops. - Low and top plates. - Junction box. - Specification plate. For scales of 8 load cells. *Price to deduct of the amount of requested scale. PSC3 PSC WITH TOP PLATES FOR TOLEDO CELLS MTX or PDX Increase for supply the scale with top plates for Toledo cells MTX or PDX. For scales of 8 load cells. PSC7 PSC WITH BOTTOM PLATES FOR TOLEDO CELLS MTX Increase for supply the scale with bottom plates for Toledo cells MTX. For scales of 8 load cells. PSC10 PSC WITH BOTTOM PLATES FOR TOLEDO CELLS PDX Increase for supply the scale with bottom plates for Toledo cells PDX. For scales of 8 load cells. PSC13 CBV CELLS INSTALLED UNDER BEAM Decrease to supply the scales BPGSM and BPGSH with cells installed under beam. Without cutting the beams. This will give us a height of the scale of 480 mm. Cells installed under beam for scales of 8 cells for BPGSM/BPBSH *Price to deduct of the amount of requested scale. CBV-8 11 catalog 2014
12 OPTIONS AND ACCESSORIES CVS-CV8C SIMPLE AND LARGE CUBICLES for BPPCE/BPPSE > > Simple cubicle. The cells must be assembled on the metal sheets, which are 15 mm thick and which even include the movement limits welded in factory. This option is with cells assembled in the factory. > > Large cubicle. The scale is installed on a frame of big sheets, 10 mm thick united among them and they share the effort on the ground. Optional: cells assembled in the factory. Simple cubicle Large cubicle Simple cubicle for scales with 8 cells and 80 t Large cubicle for scales with 8 cells and 80 t Large cubicle with 8 cells assembled in the factory and 80 t Simple cubicle for scales with 8 cells and 100 t Large cubicle for scales with 8 cells and 100 t Large cubicle with 8 cells assembled in the factory and 100 t CVS3 CV8C CV8C1 CVS10 CV8C100 CV8C1100 RP METAL RAMPS for scales BPGSM/BPPCE/BPBSH/BPCTH/BPPSE > > Metal ramps 1500 mm of thickness. The access to the weighing area is done through a pair of ramps 1500 mm thick in the entrance and/or the exit of the scale, covering the whole width of the same. > > Metal ramps 1000 mm of thickness. The access to the weighing area is done through a pair of ramps of 1000 mm in width in the entrance and/or the exit of the scale, so that the central part is left free and each wheel rail of the lorries circulates in one of these stretches of 1000 mm mm 1000 mm Metal ramps of 3000x1000 mm for scales of 80 t Metal ramps of 3000x1500 mm for scales of 80 t Metal ramps of 3000x1000 mm for scales of 100 t Metal ramps of 3000x1500 mm for scales of 100 t RP4 RP5 RP6 RP7 AR PERIMETER ANGLE for building ramps in ON-GROUND scales > > Two angles set L-100x10 mm with root foot to end the building of the entrance and exit of the scale Set of perimeter angle for ramps AR.2 APF PERIMETER ANGLE for the end of the ditch in pit scales > > Angles set L-100x10 mm with root foot to end the perimeter of the ditch in pit scales. Ditch dimensions for scales 6 x 3 m APF.6 for scales 8 x 3 m APF.8 for scales 10 x 3 m APF.10 for scales 12 x 3 m APF.12 for scales 14 x 3 m APF.14 for scales 16 x 3 m APF.16 for scales 18 x 3 m APF catalog 2014
13 OPTIONS AND ACCESSORIES GM RUBBER USE for scales 6 x 3 m for scales 8 x 3 m for scales 10 x 3 m for scales 12 x 3 m for scales 14 x 3 m for scales 16 x 3 m for scales 18 x 3 m rubber for the access und exit of balances above ground installation GM.6 GM.8 GM.10 GM.12 GM.14 GM.16 GM.18 GM.BS GR Bearing guides SCALE for ON-GROUND scales > > Railings with a tubular outline to guide the lorry on the bearing track. > > For on-ground scales with a completely flat area. Scale length 6 m GR.6 8 m GR.8 10 m GR m GR m GR m GR m GR catalog 2014
14 NOTES 14 catalog 2014
15 NOTES 15 catalog 2014
16 2014 HEAVY WEIGHBRIDGES solutions for industrial weighing Pol. Empordà Internacional - C/de Molló, VILAMALLA (Girona) España T F giropes@giropes.com
AXLELINE SERIES ELECTRONIC AXLE SCALES.
AXLELINE SERIES ELECTRONIC S National and International Certification Static / Dynamic Weighing CNC Controlled Production Automation High Accuracy Weighing Superior Reliability and High Performance Easy
More informationDelta Level 1000 Hinged Lip Pit Mounted & Suspended Frame Dock Leveller
Delta Level 1000 Hinged Lip Pit Mounted & Suspended Frame Dock Leveller Product Description The Delta Level 1000 is one of our ranges of hinged lip dock levellers. Dock levellers are indispensable for
More informationV-BRIDGE-PIT SERIES PIT TYPE ELECTRONIC TRUCK SCALES
V-BRIDGE V-BRIDGE-PIT SERIES PIT TYPE ELECTRONIC TRUCK SCALES Most Suitable For the Places with Limited Area Unique Design CNC Controlled Production Automation High Accurate Weighing Superior Reliability
More informationRAILBRIDGE SERIES ELECTRONIC RAILWAY SCALES
RAILB SERIES ELECTRONIC RAILWAY SCALES Ideal Solution For Railcar Weighing Applications Tough Structure and High Performance Two Draft or Full Draft Production Alternatives Static Weighing or Weigh In
More information.2 The scales and automated system for each of the three (3) scales shall be supplied from a single manufacturer.
New Entrance and Scale Facility Page 1 of 6 1. GENERAL 1.1 Work Included.1 The intent of the work under this section is to supply and install three (3) complete low profile platform (pitless) truck scales
More information1. GENERAL INFORMATION CAUTIONS AND GENERAL NORMS DESCRIPTION AND INTENDED USE MARKING OF DTW WEIGHBRIDGES...
INDEX 1. GENERAL INFORMATION... 3 2. CAUTIONS AND GENERAL NORMS... 4 3. DESCRIPTION AND INTENDED USE... 5 4. MARKING OF DTW WEIGHBRIDGES... 5 4.1 TECHNICAL AND METROLOGICAL MARKING OF WEIGHING BARS...
More informationCONCRETE WEIGHBRIDGE. SBP/CO model
CONCRETE WEIGHBRIDGE SBP/CO model SBP/CO model The SBP/CO weighbridge is an ideal solution for weighing motor vehicles and work trucks up to a maximum of 80 tons. The design allows for easy of transport,
More informationPRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
04 05 PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES Over floor trunking 0 300 9 0 300 93 0 38 00 Conform to standard EN 50085-- For creating a link between trunking, column,
More informationENGINEERING SPECIFICATIONS Steel Deck Motor Truck Scale
1 GENERAL PROVISIONS 1.1 Furnish and install one steel deck motor truck scale and associated electronic controls. 1.2 The scale shall have a clear and unobstructed weighing surface of not less than 70
More informationLOADING DOCK SYSTEMS HIGH SPEED DOORS LIFT TABLES DOCK SHELTERS SECTIONAL DOORS COMPL. FOOD INDUSTRY L O A D I N G D O C K S Y S T E M S
LOADING DOCK SYSTEMS HIGH SPEED DOORS LIFT TABLES DOCK SHELTERS SECTIONAL DOORS COMPL. FOOD INDUSTRY L O A D I N G D O C K S Y S T E M S LOADING DOCK SYSTEMS LOADING DOCK SYSTEMS Loading dock systems enable
More informationEngineering Specification Concrete Deck Truck Scale
Engineering Specification Concrete Deck Truck Scale The following set of specifications shall describe a fully electronic, low profile, modular type concrete deck truck scale system, designed to be optionally
More informationweigh in motion solutions WEIGH IN MOTION CONTROL ANALYSIS EFFECTIVENESS PREVENTION ACCURACY
weigh in motion solutions WEIGH IN MOTION CONTROL ANALYSIS EFFECTIVENESS PREVENTION ACCURACY One of the main aims of governments and authorities is TO ACHIEVE THE BEST SAFETY IN TRAFFIC and preserve infrastructures.
More informationweighbridges a comprehensive range of solutions preciamolen.com
weighbridges a comprehensive range of solutions preciamolen.com WEIGHBRIDGES A COMPREHENSIVE RANGE OF SOLUTIONS a manufacturer s experience PRECIA-MOLEN puts at your disposal a know-how based on more than
More informationEngineering Specification Steel Deck Truck Scale
Engineering Specification Steel Deck Truck Scale The following set of specifications will describe a fully electronic, low profile, modular type steel deck truck scale system, designed to be optionally
More information>> Complete Digital Scale System
>> Complete Digital Scale System MEASURES UP >> When comparing other truck scales, make sure that they measure up to Centurion-DT s ultra heavy duty 100,000 lb concentrated load capacity and industry exclusive
More informationPallet shelving systems Efficient, orderly and sturdy
Pallet shelving systems Efficient, orderly and sturdy Pallet shelving systems are used for storing mainly palletised goods. Pallets and containers are arranged on top of or next to one another to save
More informationGENERAL PROVISIONS: Furnish and install one steel platform motor truck scale and associated electronic controls.
GENERAL PROVISIONS: Furnish and install one steel platform motor truck scale and associated electronic controls. The scale shall have a clear and unobstructed weighing surface of not less than 70 feet
More informationGENERAL PROVISIONS: Furnish and install one steel deck platform motor truck scale and associated electronic controls.
GENERAL PROVISIONS: Furnish and install one steel deck platform motor truck scale and associated electronic controls. The scale shall have a clear and unobstructed weighing surface of not less than 70
More informationLOW PROFILE FLOOR SCALE
π LOW PROFILE FLOOR SCALE 1-800-295-5510 uline.com SITE SELECTION Select a site for your new floor scale where it is least likely to be damaged by fork trucks and other material handling devices. Floor
More informationValue in Weigh Tech LOAD CELLS SHORT FORM
Value in Weigh Tech 2012 LOAD CELLS SHORT FORM SINGLE POINT - PLATFORM CELLS B A scales, medium and high capacity Price computing scales Medical scales Bench and hopper weighing Counting scales Packing
More informationVehicle Scales. Rugged Concrete Weighbridge Composite design for long life
Vehicle Scales VTC205 Strong Designed for long life Rugged Tough environments Accurate POWERCELL Performance Service Low longterm cost of ownership Low Profile For driver safety Rugged Concrete Weighbridge
More informationThe Ton-Tel Weighbridge
The Ton-Tel Weighbridge Plug-and-Weigh Technology Built to last in a tough environment Proven reliability, lower total cost of ownership. Digital Load Cell weight sensors sealed to IP68. Plug-and-Weigh
More information9 good reasons for Sartorius truck scale components Seite 1
9 good reasons for Sartorius truck scale components 05.04.12 Seite 1 The choice for professionals Load Cells, Mounting Kits, Indicators, Accessories... Seite 2 1 Flexibility in concept Two series: one
More informationAlisply Walls. Product brochure
Alisply Walls Product brochure Encofrados J. Alsina S.A. Pol. Ind. Pla d en Coll Camí de la Font Freda, 1 08110 Montcada i Reixac (Barcelona - Spain) Tel.: (+34) 935 753 000 Fax: (+34) 935 647 059 E-mail:
More informationWeigh-in-Motion Systems for Transport and Industry
Weigh-in-Motion Systems for Transport and Industry Product catalog www.tenzovahy.cz Sandpits, Quarries Agriculture, Biogas Energy, Incinerators Concrete plants Our Weighing Systems have been approved for
More informationm.ricelake.com
800-472-6703 www.ricelake.com m.ricelake.com Heavyweight Loads need Heavy-duty Track Scales RT SURVIVOR RT Series rail scales are up to the job. The RT is available in both steel and concrete deck configurations
More informationGRIDFLEX The flexible slab formwork with safe accessible grid elements
GRIDFLEX The flexible slab formwork with safe accessible grid elements 07044 Edition 04 2011 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)7309.950-0 Fax
More informationA MODERN TREEHOUSE APPEALS TO BOTH CHILDREN AND ADULTS
CUBIC A MODERN TREEHOUSE APPEALS TO BOTH CHILDREN AND ADULTS Who wouldn t have dreamt of their very own treehouse as a child? The wish to find new perspectives and climb high up the tree spurred many of
More informationProduct Datasheet. Hydraulic Dock Leveller with Telescopic Lip (PT) Load capacity: 150 KN ANSI NORM. Contact:
Product Datasheet Hydraulic Dock Leveller with Telescopic Lip (PT) Load capacity: 150 KN ANSI NORM Contact: 4/83 Boundary Rd Carrum Downs VIC 3201 Australia p: +61 (3) 87 877 877 e: innovation@ebs-building.com
More information1. Installation Preparatory work Equipotential bonding Floor installation Connection of several modules...
Installation information METTLER TOLEDO MultiRange DRF... / DSF... DRF.../DSF... Contents Page 1. Installation... 3 1.1 Preparatory work... 3 1.2 Equipotential bonding... 3 1.3 Floor installation... 4
More informationDESKS FICHE TECHNIQUE AIRPORT \ CONVEYOR BELTS ASSIGNED TO CHECK-IN ZONE. The check-in stations comprise 3 or 4 conveyor belts :
FICHE TECHNIQUE AIRPORT \ CONVEYOR BELTS ASSIGNED TO CHECK-IN ZONE The check-in stations comprise 3 or 4 conveyor belts : T1 conveyor belt : Depositing weighing labelling; T2 conveyor belt : Baggage length
More informationELEVATORS & SERVICE LIFTS FREIGHT HOIST MAST LIFTS FREIGHT HOIST SCISSOR LIFTS ELEVATING DOCK SCISSOR LIFTS DOCK LEVELLERS
ELEVATORS & SERVICE LIFTS FREIGHT HOIST MAST LIFTS FREIGHT HOIST SCISSOR LIFTS ELEVATING DOCK SCISSOR LIFTS DOCK LEVELLERS McGrath Industries Ltd. 2017. All rights reserved. Ed04, CJM. ELEVATORS SERVICE
More informationStainless steel. 1.6 Stainless steel IP 69 K. Premium Panel, protection category IP 69K
T Premium Panel, protection category IP 69K IP 69 K.6 H H H Optionally with or without keyboard housing Resistant to high-pressure cleaning (protection category IP 69K). The seal lies between two surfaces
More informationPower IT Compact Secondary Substations, CSS. Technical catalogue for sheet steel substations
Power IT Compact Secondary Substations, CSS Technical catalogue for sheet steel substations The New Standard for Individual Solutions The new CSS substations represent a unique concept, which is introducing
More informationEXPENDO. WEIGHING PLATFORMS METALLIC NORMAL-DUTY
WEIGHING PLATFORMS EXPENDO WEIGHBRIDGES An exceptional design, which is based on the most advanced calculation and construction techniques. Technical specification METALLIC NORMAL-DUTY Length* [m] Platform
More informationFAST. WEIGHING PLATFORMS METALLIC HEAVY-DUTY
WEIGHING PLATFORMS FAST WEIGHBRIDGES An exceptional design, which is based on the most advanced calculation and construction techniques. Technical specification METALLIC HEAVY-DUTY Length* [m] Platform
More informationInstalling DELTABEAM. Installation of DELTABEAM. Deliveries. Storage on-site
Installing DELTABEAM Installation of DELTABEAM These DELTABEAM installation instructions are intended to complement the project s erection plan. Peikko s technical support can help with the erection plan
More informationCW Series FLOORSCALES. ISO 9001:2000 Registered
CW Series FLOORSCALES ISO 9001:2000 Registered Intercomp, the world leader in portable scales for the transportation and material handling industry, provides the most comprehensive line of bench, floor,
More informationAUSTRALIA S LARGEST WEIGHBRIDGE MANUFACTURER!
AUSTRALIA S LARGEST WEIGHBRIDGE MANUFACTURER! UltraHawke Pty Ltd ACN 004 659 358 flintec RC3 SERIES rocker column loadcell DESCRIPTION The RC3 Series represents a technically innovative weighing solution
More informationNETbox Wall Mounting CABINETs
NETbox Wall Mounting CABINETs 9 NETbox Wall Mounting Cabinets FAMILY W=mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an
More informationAegis Heavy Capacity 20K Floor Scale. MODEL: 6200 Series. Installation Manual
Installation Manual Aegis Heavy Capacity 20K Floor Scale MODEL: 6200 Series Copyright 1997-2014 Fairbanks Scales, Inc. Revision 3 50637 All Rights Reserved 07/14 Aegis Heavy Capacity 20K Floor Scale Model:
More informationDB10 BLTD C10 Pipe Support. Description. Manufacturer Information BOLTED FRAMING GTIN UPC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 DB10 BLTD C10 Pipe Support Cooper B-Line/Cable Tray Catalog Number Manufacturer Description Weight per unit Product Category
More informationCrawford 620 Teledock 60kN. Product datasheet Q Assa Abloy, the global leaders in door opening systems
Q1.0-2012 Assa Abloy, the global leaders in door opening systems Copyright and Disclaimer Notice Although the contents of this publication have been compiled with the greatest possible care, ASSA ABLOY
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationNETbox Wall Mounting CABINETs
NETbox Wall Mounting CABINETs 9 NETbox Wall Mounting Cabinets FAMILY W=mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an
More informationPerformance Floors for Warehouses and Distribution Centres. Kevin Dare, Managing Director, Face Consultants Ltd.
Performance Floors for Warehouses and Distribution Centres Kevin Dare, Managing Director, Face Consultants Ltd. Performance Floors for Warehouses and Distribution Centres. Kevin Dare, Face Consultants
More informationCrawford 6010S Swingdock 60kN. Product datasheet Q Assa Abloy, the global leaders in door opening systems
Q1.0-2013 Assa Abloy, the global leaders in door opening systems Copyright and Disclaimer Notice Although the contents of this publication have been compiled with the greatest possible care, ASSA ABLOY
More informationOptiLine 70. Service Poles. Technical and Material data
P9 P97 P97 Description is a service pole range for all types of. Service poles are made of natural anodized aluminium with a high surface fi nish. They are installed free-standing in the room, mounted
More informationTOP ACCESS LOW PROFILE CONCRETE & STEEL DECK TRUCK SCALES. TOP ACCESS LOW PROFILE CONCRETE and STEEL DECK TRUCK SCALES.
TOP ACCESS LOW PROFILE CONCRETE & STEEL DECK TRUCK SCALES TOP ACCESS LOW PROFILE CONCRETE and STEEL DECK TRUCK SCALES www.ricelake.com NTEP-certified widths to 14 feet! SURVIVOR TM OTR Concrete or Steel
More informationProtective devices according to EN ISO 12100
devices according to EN ISO 12100 PLUS PROTECT-PANEL page 590 589 PLUS PROTECT-PANEL system High speeds, quick machining cycles, cooling water and chips: Machine tools represent a dangerous environment
More informationOne need One solution
RH1 Catalogue One need One solution Barcelona, Spain. Timisoara, Romania. Welcome to Inkema. Inkema specialises in providing integrated solutions for loading and unloading goods and for access-control
More information50 N E T b o x Wall Mounting C A B I N E T s
50 www.lande.com.tr N E T b o x Wall Mounting C A B I N E T s W=600mm NETbox Series Wall Mounting Cabinets NETbox series Networking Enclosures/ Cabinets, provide maximum optimization resulted to an optimum
More informationEasy Entrance TPB-M04
Easy Entrance TPB-M04 An access solution for sanitary facilities that is clean and profitable Our café was a great success from the very beginning, it was just the sanitary facilities that gave us cause
More informationTECHNICAL SPECIFICATION DANTECO HERMANNS. CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device
TECHNICAL SPECIFICATION DANTECO HERMANNS CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device 6058(20') x 2438(8') x 2591(8'6") MODEL NO. : CX09-20SNX1 SPEC. NO : CX09-20SNX1-S3
More informationTECHNICAL MANUAL. PVL Connecting Loop. Wall Connecting Loop Box with Single Wire
TECHNICAL MANUAL PVL Connecting Loop Wall Connecting Loop Box with Single Wire Version: PEIKKO GROUP 11/2012 PVL Connecting Loop Single wire wall connecting loop Benefits of PVL Easy to install, individual
More informationIndustrial trucks and elevating platforms
Industrial trucks and elevating platforms No. 4 Yale Industrial Products GmbH At a glance Contents Hand pallet trucks Page Hand pallet truck HU Profi 3 Hand pallet truck special HU Special 4 Stainless
More informationSeries ESK / ESB. Cabinets in Modular Design. Manufacturing Program: ESK-20 ESK-40 ESK-80 ESB Sandwich construction 20 mm, 40 mm and 80 mm
Series ESK / ESB Sandwich construction 20 mm, 40 mm and 80 mm Thermal conductivity k: 1,2 W/m 2 K at ESK-20 : 0,75 W/m²K at ESK-40 : 0,35 W/m²K at ESK-80 Self-supporting, frameless construction built with
More informationTECHNICAL SPECIFICATIONS FOR 40 TON CAPACITY 7.5 x 3/9 x 3 M ELECTRONIC PITLESS PORTABLE WEIGHBRIDGE.
TECHNICAL SPECIFICATIONS FOR 40 TON CAPACITY 7.5 x 3/9 x 3 M ELECTRONIC PITLESS PORTABLE WEIGHBRIDGE. SR. NO. ITEM OUR STANDARD SUPPLY PURCHASER'S REMARKS 1 LOAD-CELLS 'DOUBLE ENDED SHEARBEAM' or COMPRESSION
More informationDOSHIN 3-DOF MODULAR EXPANSION JOINT
DOSHIN 3-DOF MODULAR EXPANSION JOINT Contents 1.0 INTRODUCTION... 2 2.0 ADVANTAGES... 2 3.0 DESIGNATION OF TYPES... 3 4.0 CHARACTERISTICS... 4 4.1 MOVEMENTS... 4 4.2 PRINCIPLE OF ELASTICITY... 4 4.3 MOVEMENT
More informationINDIVIDUAL SOLUTIONS FROM A SINGLE SOURCE A large variety of products and systems for warehouses, factories and workshops
Extract of the general catalogue, CHAPTER F INDIVIDUAL SOLUTIONS FROM A SINGLE SOURCE A large variety of products and systems for warehouses, factories and workshops GENERAL CATALOGUE Modular shelving
More informationInternational GmbH ALUPURA
International GmbH Recessed covers ALUPURA ALUPURA Recessed covers ALUPURA product line Aluminium manhole-covers with variable surface. The variable surface of ALUPURA recessed-covers make manholes, inspection
More information2 PALLET P RA ALLET CKING RA
PALLET RACKING 2 PALLET RACKING 3 The pallet racking system uses simple modular construction for storing pallets that provides great variability for both small and large storage spaces. Pallet racks are
More informationW E I N S P I R E W O R K
W E I N S P I R E W O R K Updated 13.08.2018 Founded in 1906, GBP Ergonomics AB is a leading producer of ergonomic workspaces in Scandinavia, supplying work stations, lockers, pedestals, trolleys, accessories
More informationTOP ACCESS LOW PROFILE CONCRETE and STEEL DECK TRUCK SCALES TOP ACCESS LOW PROFILE CONCRETE & STEEL DECK TRUCK SCALES m.ricelake.
TOP ACCESS LOW PROFILE CONCRETE and STEEL DECK TRUCK SCALES TOP ACCESS LOW PROFILE CONCRETE & STEEL DECK TRUCK SCALES 800-472-6703 www.ricelake.com m.ricelake.com Intelligent Junction Box Add an QUBE 2
More informationCurtain Wall Stick System (Capped)
Curtain Wall Stick System (Capped) Stick Construction Capped Curtain Wall Reference Brand: Sapa Building System Elegance 52 ST GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More informationStandard program overview fire doors
Fire doors Standard program overview fire doors Fire-resistant and fire-proof steel doors Product Dimensions in mm width/height (clear opening) Tested as fire-resistant door in acc. with DIN 4102 / EN
More informationRacking systems RACKING SYSTEMS. IT S EASY TO ORDER sales hotline:
Racking systems Bar and Sheet Racking and Storage...40 Supershelf Tyre Racking...44 Pallet Racking...45 Protection for Racking and Columns...46 IT S EASY TO ORDER www.action-storage.co.uk sales hotline:
More informationTECHNICAL MANUAL. PEC Column Shoe. Heavy-duty Bolted Column Connections
TECHNICAL MANUAL PEC Column Shoe Heavy-duty Bolted Column Connections Version: PEIKKO GROUP 09/2018 PEC Column Shoe For bolted column connections Advanced casting process with the help of standard accessories
More informationF500 Steeplechase Waterjump with Valve Option
Gill Athletics www.gillathletics.com Phone: (800) 367-3090 Fax: (217) 367-8440 Excavation F500 Steeplechase Waterjump with Valve Option Installation Guide Read all instructions before installing!!! Establish
More informationElfin Series Collaborative Robot
Elfin Series Collaborative Robot Flexible, Reliable, Efficient, Effective As industry today strives for more efficiency, increased output and reduced costs, Motion Control Products has introduced the Elfin
More information[DURABIM TRUCK SCALES]
Balances Industrielles Montréal 2717 Avenue Dollard, LaSalle, Qc, H8N 2J8 514-932-9426 1800-361-2268 www.bim.ca 2015-2016 Edition [DURABIM TRUCK SCALES] Superior quality scales made in Quebec Introduction
More informationLOW PROFILE STEEL & CONCRETE DECK TRUCK SCALES
LOW PROFILE STEEL & CONCRETE DECK TRUCK SCALES CONCRETE DECK INSTALLATION C O N C R E T E Fast, easy installation decades of reliable performance. That s what the SURVIVOR EZ concrete deck truck scale
More informationThe Versatile & Practical Choice. Gartec Goods Lifts. Modular & Customised
The Versatile & Practical Choice Gartec Goods Lifts Modular & Customised Gartec Goods lifts A success story The Gartec Goods Lift adds another great range to the Gartec portfolio. Throughout the world,
More informationSUMO Wall Shoe. For bolted wall connections. Technical Manual. Version: Canada and United States 08/2016
Wall Shoe For bolted wall connections Version: Canada and United States 08/2016 Technical Manual Wall Shoe For bolted wall connections Strong tensile connection: enables shear walls to be built of precast
More informationPRECISE. CERTIFIED. RELIABLE. I. General description II. Types by the material of the weighing platform: III. Types by the mode of mounting:
WEIGHBRIDGES PRECISE. CERTIFIED. RELIABLE. CONTENT OF THE BROCHURE I. General description II. Types by the material of the weighing platform: 1. Steel weighbridge 2. Concrete weighbridge III. Types by
More informationCrawford 610 Swingdock 60kN. Product datasheet
Copyright and Disclaimer Notice Although the contents of this publication have been compiled with the greatest possible care, Crawford cannot accept liability for any damage that might arise from errors
More informationEngineering Specifications
Engineering Specifications Tension Weigh Modules The portions of this specification that have been left blank ( ) should be filled with information about the specific application. Information for the blanks
More informationPassive Bollards Fixed and removable systems for simple, effective security
Passive Bollards Fixed and removable systems for simple, effective security Ross fixed and removable bollards are the ideal solution for perimeter protection of buildings, equipment and walkways. They
More informationR-Group Finland Oy. RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy RLA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 16.8.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
More informationENERGY-DISTRIBUTION. TwinLine N 44 The new system of floor-standing cabinets in IP44
ENERGY-DISTRIBUTION TwinLine N 44 The new system of floor-standing cabinets in IP44 2 FLOOR-STANDING CABINETS TWINLINE N 44 2CPC 000 351 B0201 PRODUCT BENEFITS The new system of floor-standing cabinets
More informationUFB. Floor Products. Floor outlet boxes. Content. UFB-700 and UFB-900, rectangular and square fl oor outlet boxes for dry premises Page 2
P1989 Content -700 and -900, rectangular and square fl oor outlet boxes for dry premises Page 2-140M, square fl oor outlet box intended for dry premises Page 5-700M and -900M, rectangular and square fl
More informationTECHNICAL MANUAL. PC Beam Shoe. Hidden Beam Shoe for Corbel System
TECHNICAL MANUAL PC Beam Shoe Hidden Beam Shoe for Corbel System Version: PEIKKO GROUP 03/2012 PC Beam Shoe Corbel system to support beams System benefits Easy and fast beam installationtion Fits into
More informationVN Series Floor Scale Instruction Manual
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com VN Series Floor Scale Instruction Manual VN Series Floor Scale EN-1 INTRODUCTION
More informationLEADING IN WELDING SAFETY CATALOGUE 2014 CONSTRUCTION. Version 14/01
LEADING IN WELDING SAFETY CATALOGUE 2014 CONSTRUCTION Version 14/01 CONSTRUCTION Table of contents TABLE OF CONTENTS General information 3 Quality 4 Swivel arms 5 Swivel arms supports 16 Poles 18 Columns
More informationSUGGESTED SPECIFICATION SECTION ENTRANCE FLOOR MATS AND FRAMES
Note: After downloading this spec, the Specifier must choose the correct Finish, Insert and Frame options and delete all other options to produce an accurate specification. GRIDLINE (G6) SUGGESTED SPECIFICATION
More information» Bolted shelving system
Plug-in system Bolted system Office Wide-span Plug-in system Bolted Office Wide-span systembolted system» Bolted system the flexible classic 112 Bolted system System overview 114-11 Complete units Shelving
More informationR-Group Finland Oy. REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved
R-Group Finland Oy REA Lifting Inserts Technical Manual According to Eurocodes, EU Machinery directive 2006/42/EC and VDI/BV-BS 6205 CE Approved 10.2.2017 2 Table of Contents 1 DESCRIPTION OF THE SYSTEM...
More informationLOAD CELLS. Shear Beam, S-Beam and Button Load Cells
LOAD CELLS Shear Beam, S-Beam and Button Load Cells Series Keyfacts Special Characteristics KM102 Our flat one: 13 mm height is enough Nominal Load: From 0..30 N to 0..1 kn Output Signal: 1 mv/v, 2 mv/v
More informationEC Type-Approval Certificate
EC Type-Approval Certificate No. DK 0199.365 Revision 3 MBC / MPE / MPD / MPC / MCC / MWA / MTA NON-AUTOMATIC WEIGHING INSTRUMENT Issued by DELTA Danish Electronics, Light & Acoustics EU - Notified Body
More informationNewton Group CANADACAR SYSTEM. Basic Construction of the CANADACAR System. CANADACAR Module Format
Basic Construction of the CANADACAR System The CANADACAR System is a prefabricated, engineered and constructed freestanding parking garage structure that utilizes superior technology combining pre-cast
More informationPC Beam Shoe. Corbel system to support beams. Technical Manual. Version: DK 4/2012 Design standard: DS EN Eurocodes + NA (Denmark)
PC Beam Shoe Corbel system to support beams Version: DK 4/2012 Design standard: DS EN Eurocodes + NA (Denmark) Technical Manual PC Beam Shoe Corbel system to support beams System benefits Easy and fast
More informationProduct Application Guidelines. Platform Scales
Product Application Guidelines Platform Scales Table of Contents Preface... 3 Introduction... 4 Platform scale selection... 4 Locating the scale... 5 Location... 5 Vibration... 5 Floor... 5 Bench... 5
More informationFabryka Wag Kalisto. balanced solutions
Fabryka Wag Kalisto balanced solutions OUR CUSTOMERS *references with addresses and telephone numbers of our Customers are available at our head office TABLE OF CONTENTS I. About the Company 2 II. Weighbridges
More informationBest Selection for Your Business. Electronic Pricing Scale. User s Manual. (Model: TP-31)
Best Selection for Your Business Electronic Pricing Scale User s Manual (Model: TP-31) CATALOG 1. Foreword... 2 1.1. Introductions... 2 1.2. Main functions and features... 2 1.3. Specification... 2 1.4.
More informationInstallation. Natrix
Installation Natrix Table of Contents 1 Prerequisites for Installation Site... 2 1.1 On-site Delivery and Insertion at Ground Level... 2 1.2 On-site Delivery and Insertion via Ramp... 2 1.3 Intermediate
More information" RISKS ASSOCIATED WITH THE INSTALLATION OF THE SYSTEM
PALLET RACK 85-110 installation, use and maintenance instructions Shelving made entirely of first grade certified steel sheet and cold-profiled steel with galvanized steel according to SENDZIMIR process
More informationPORTISO is a company dedicated to the manufacturing of isothermal doors built to satisfy the different needs of any industrial sector.
PORTISO is a company dedicated to the manufacturing of isothermal doors built to satisfy the different needs of any industrial sector. We have modern manufacturing facilities in France, UK and Portugal,
More informationMICROPOWER. 8 Precision Str Kya-Sand Randburg P.O.Box 4430 Randburg 2125 Tel Fax
MICROPOWER 8 Precision Str Kya-Sand Randburg P.O.Box 4430 Randburg 2125 Tel 011 462 1106 Fax 011 462 1943 www.micropower.co.za 1. Load Cell Low Profile Type (LFR) Rated load: 0. 5-20t silicone sealed,
More informationWEIGHBRIDGE FORMAT SPECIFICATIONS
WEIGHBRIDGE FORMAT SPECIFICATIONS TABLE OF CONTENTS PAGE WEIGHBRIDGE TERMINOLOGY...2 ABOVE GROUND WEIGHBRIDGE CONSIDERATIONS...3 SEMI-PIT WEIGHBRIDGE CONSIDERATIONS...4 CUSTOM SEMI-PIT WEIGHBRIDGE CONSIDERATIONS...5
More information