Sample Specification Prepared By: Combs & Associates, Inc. Manufacturers Representatives

Transcription

1 Sample Specification Prepared By: Combs & Associates, Inc. Manufacturers Representatives 6190 Olson Memorial Highway office Golden Valley, MN fax Section Finish Hardware PART 1 GENERAL 1.01 WORK INCLUDED A. Furnish all finish hardware specified herein, listed in the hardware schedule, or required by the drawings. B. Where items of hardware are not definitely or correctly specified and is required for the intended service, such omission, error, or other discrepancy should be directed to the Architect prior to the bid date for clarification by addendum. Otherwise furnish such items in the type and quantity established by this specification for the appropriate service intended RELATED WORK A. Section Finish Carpentry. B. Section Metal Doors and Frames. C. Section Wood Doors: Any intumescent material that may be required to comply with positive pressure fire door testing to be supplied by the wood door supplier. D. Section Entrances and Storefronts: All hardware including cylinders to be supplied by Weatherstrip to be supplied by the aluminum door and frame supplier on all exterior doors (supply aluminum door and frame manufacturers standard weatherstrip). D. (OPTION) Section Entrances and Storefronts: All hardware except cylinders to be supplied by the aluminum entrance and storefront supplier. Hardware supplied for aluminum entrances shall comply with this section of the specification. Cylinders are specified in, and are to be supplied by E. Division 16 - Electrical REFERENCES A. A.D.A. - Americans with Disabilities Act. B. ANSI A Specifications for making facilities accessible to physically handicapped people. C. NFPA 80 - Standards For Fire Doors and Windows. D. NFPA Life Safety Code E. U.L. - Building Material Directory. F. D.H.I. - Recommended Locations for Architectural Hardware G. Applicable State and Local Building Codes, including 1997 UBC SUBMITTALS A. Hardware Schedule: Immediately after award of hardware contract, submit five (5) copies of a detailed hardware schedule, vertical format. Prepare under the supervision of an AHC, registered Architectural Hardware Consultant, and under provisions of Division One. 1. Itemize Hardware in the sequence and format established by this specification. 2. List and describe each opening separately. Include all doors with identical hardware, except hand, in a single heading. Include door number, room designations, degree of swing, and hand. 3. List related details. Include dimensions, door and frame material, and other considerations affecting hardware. 4. List all hardware items to be supplied. Include manufacturer's name, quantity, product name, catalog number, size, finish, attachments, and related details where applicable. 5. Resubmit (5) copies of the corrected schedule when required. B. Keying Schedule: After receipt of approved hardware schedule submit a copy of keying schedule as a result of a keying meeting between the owner, and the hardware supplier.

2 C. Samples: If so directed by the Architect, submit samples of finish hardware items for approval. Properly identify each sample as to make and number, and furnish in the specified finish. D. Templates: Furnish a copy of approved hardware schedule, along with applicable templates for factory-prepared hardware to each door and frame fabricator. E. Electrical Hardware: Submit electrical specifications and applicable information to the electrical contractor after receipt of the approved hardware schedule. F. Substitutions: Submit under provisions of Division One. Provide detailed information and catalog cuts indicating the comparison to the specified hardware. If requested by the Architect, provide a sample accompanied by a sample of the specified item for comparison QUALITY ASSURANCE A. Qualifications: 1. Manufacturer: Except where specified in the hardware schedule, furnish products of only one manufacturer for each type of hardware. Minimum three (3) years experience in the manufacture of the item specified. 2. Supplier: A company experienced in the builders' hardware industry for a minimum of two (2) years, and can call upon an AHC, registered Architectural Hardware Consultant, for consultation during the full extent of the project. B. Regulatory Requirements: 1. Furnish UL or Warnock Hersey listed hardware for all fire labeled and 20 minute openings in conformance with requirements for class of opening scheduled, whether specifically called for in this specification or not. 2. Furnish hardware that conforms to all applicable state and local building codes, including 1997 UBC positive pressure testing requirements. Where specified hardware is not in conformance with applicable codes, such omission or error should be directed to the Architect prior to the bid date for clarification by addendum, otherwise furnish hardware as required by code DELIVERY, STORAGE AND HANDLING A. Deliver, store and handle in accordance with Division One. Mark each original container to correspond with the approved hardware schedule for the installation location. B. Receive, inventory and store hardware in a secure and dry environment, protect against loss and damage. C. Report any shortages to the hardware supplier no later than 48 hours after receipt of delivery to the job site. D. Stockpile items sufficiently in advance to ensure their availability. Coordinate delivery, handling, and installation of hardware items to ensure orderly progress of total work, and minimize or eliminate losses and damage. PART 2 PRODUCTS 2.01 ACCEPTABLE MANUFACTURERS Products Specified Acceptable A. Hinges PBB Stanley, Hager, McKinney, Bommer B. Flush Bolts D.C.I. Trimco, Ives C. Locks and Latches PDQ Schlage, Corbin/Russwin, Sargent, Yale, Best D. Keypad Access Control Locks Alarm Lock Kaba-Ilco, Locknetics E. Exit Devices Dorma VonDuprin, Precision, Corbin/Russwin, Yale, Sargent F. Pulls, Pushbars, Push/Pull Plates Trimco Hiawatha, Burns, Hager G. Coordinators D.C.I. Trimco, Ives H. Door Closers Dorma Norton, LCN, Sargent, Yale I. Low Energy Automatic Operators Dorma LCN, Dor-O-Matic, Horton, Stanley, Besam J. Protective Plates Trimco Hiawatha, Burns, Hager K. Overhead Stops Dorma Glynn-Johnson, Rixson, A.B.H., Sargent L. Wall Stops, Floor Stops Trimco D.C.I., Hager, Ives M. Electromagnetic Door Holders Dorma Rixson, LCN N. Thresholds, Sweeps, Weatherstrip, Gasket, and Drip Caps National Guard Products Pemko, Reese O. Key Cabinets M.M.F. Lund, Telkee

3 2.02 HINGES Description P.B.B. Hager Stanley McKinney Bommer Std. Wt. Plain Bearing - Steel PB F179 T Std. Wt. Ball Bearing - Steel BB81 BB1279 FBB179 TB2714 BB5000 Std. Wt. Ball Bearing - Non Ferrous BB21/BB51 BB1191 FBB191 TB2314 BB5001/BB5002 Hvy. Wt. 4 Ball Bearing - Steel 4B81 BB1168 FBB168 T4B3786 BB5004 Hvy. Wt. 4 Ball Bearing - Non Ferrous 4B21/4B51 BB1199 FBB199 T4B3386 BB5005/BB5006 B. Hinges supplied must be tested and comply with ANSI/BHMA standards for consistency, wear and corrosion resistance. C. Quantity: Furnish hinges for each door leaf as follows, unless otherwise noted in groups: 1. Doors up to and including 90" high - 3 hinges 2. Doors over 90" high through 120" high - 4 hinges 3. Provide one additional hinge for every additional 30" in height over 120" 4. Dutch doors - 4 hinges D. Type: Furnish as follows, unless otherwise noted in groups: 1. Standard weight, plain bearing hinge (PB81) for interior openings through 36" wide without a door closer. 2. Standard weight, ball bearing hinge (BB81) for interior openings over 36" through 40" wide without a door closer, and for interior openings through 40" wide with a door closer. 3. Heavy weight, four ball bearing hinge (4B81) for all interior openings over 40" wide, and for all vestibule doors. 4. Heavy weight, four ball bearing, stainless steel (4B51) or brass (4B21) as required, for all exterior openings. E. Size: Furnish as follows, unless otherwise noted in groups: /4" doors : 4 1/2" x 4 1/2" 2. Provide proper hinge width to clear trim and allow full 180 degree swing. F. Hinges for all lockable doors opening outward shall have non-removable pin (NRP). All other hinges shall have non- rising pins. G. Provide all hinges with flat button tips unless otherwis e noted in groups. H. Concealed electric through-wire feature, when called for in groups, shall be as modified by the hinge manufacturer, or may be as modified by Architectural Control Systems, Inc FLUSH BOLTS Description Door Controls Int'l. Trimco Ives Manual - Metal Door 780F 3917 FB458 Manual - Wood Door 790F 3913 FB358 Automatic - Metal Door FB31P Automatic - Wood Door FB41P Self Latching - Metal Door FB51P Self Latching - Wood Door FB61P Dust Proof Strike W/ Mtg. Plate DP2 B. Furnish a dustproof strike (82) for all bottom bolts LOCKS AND LATCHES

4 Description PDQ Schlage Corbin/Russwin Sargent Yale Best Heavy Duty Mortise MR L9000 ML H Hvy. Duty Grade 1 Cylindrical GT D Series CL Line K Std. Duty Grade 2 Cylindrical SP A-L CL Line K B. Furnish lever design as follows: PDQ "Philadelphia" or equal. C. Furnish lock types and functions as specified in the hardware schedule, and as follows: 1. Provide 2 3/4" backset. 2. Provide wrought box strike for installation in a wood door or frame. 3. Provide ANSI A115.2 strike for installation in a hollow metal door or frame. 4. Strike lip length shall be sufficient to protect trim, but not to project more than 1/8" beyond trim, frame, or inactive leaf. 5. Furnish abrasive coating on outside levers that lead to loading platforms, stages, mechanical and electrical rooms, stairs other than exit stairs, and other hazardous locations as required. D. Internal electrified functions, when called for in groups, shall be as modified by the lock manufacturer, or as modified by Architectural Control Systems, Inc PUSH BUTTON ACCESS CONTROL LOCKS Description Alarm Lock Kaba-Ilco Locknetics Push Button Access Control Lock DL PRO5196 B. Mechanical key override shall be keyed into the building master key system EXIT DEVICES Description Dorma VonDuprin Precision Yale Corbin/Russwin Sargent Wide Stile Rim Rim ED Wide Stile Surf. Vert. Rod ED Wide Stile Conc. Vert. Rod ED Wide Stile Mortise ED Narrow Stile Rim Rim ED Narrow Stile Conc. Vert. Rod ED B. Furnish exit device types and functions as specified in the hardware schedule. C. Lever handles supplied with exit devices shall match the design specified for locks and latches D. Internal electrified functions, when called for in groups, shall be as modified by the exit device manufacturer, or as modified by Architectural Control Systems, Inc PULLS, PUSHBARS, PUSH/PULL PLATES Description Trimco Hiawatha Burns Hager 1" dia. straight pull B 26C 4J 1" dia. offset pull A 39C 12J 1" dia. pushbar LBP S.75" dia. straight pull A 25B 3G push/pull plate F 54 30S B. length of push bars shall be sufficient to mount each end on center of stile. Pushbars on flush doors shall be 3" less than door width COORDINATORS

5 Description Door Controls Int'l Trimco Ives Coordinator 600 Series 3094 COR Series Mounting bracket AB 3095 MB2 Mounting bracket C 3096 MB1 B. Furnish filler bars to fill the complete opening width, mounting brackets for all stop applied hardware, carry bars, and special preparation for top latches where applicable DOOR CLOSERS Description Dorma Norton LCN Sargent Yale Heavy Duty Reg. Arm Heavy Duty Parallel Arm 8900 SPA PR EDA 350 PED PR4400 Heavy Duty Stop Arm 8900 DS CLP CUSH 350 PS CLP4400 Medium Duty Standard Duty - No Cover B. Furnish complete with mounting brackets, drop plates, spacers, special shoes, and thru bolts as may be required by the door and frame conditions LOW ENERGY AUTOMATIC OPERATORS Description Dorma LCN Dor-O-Matic Horton Stanley Besam Operator - Push Side ED800J M x x R/LHR 3121 x SM455 OS Operator - Pull Side ED800T M x x R/LH 3121 x SM455 IS Hard Wired Wall Switch 800WS C Wireless Wall Switch 800WS/RFT R C1260-4RL x Wireless Receiver 800RFR C B. Provide arms, mounting plates, sizes, stops, and any components that may be necessary to interface with electrified hardware that are required for complete and proper operation of the openings affected. Completed installation must meet or exceed requirements of ANSI A C. Provide actuators as detailed in groups. D. Conduit, electrical back boxes, wiring, and 120 VAC input power by Division 16 - Electrical PROTECTIVE PLATES A. Acceptable manufacturers: Trimco Hiawatha Burns Hager B. All kick plates shall be 10" high and 2" less door width for single doors and 1" less door width for pairs. C. All mop plates shall be 4" high and 1" less door width. D. Thickness shall be.050" (16 gauge) and all plates shall have countersunk holes and beveled (all four) edges OVERHEAD STOPS Description Dorma Rixson Glynn-Johnson A.B.H. Sargent Heavy Duty Surface Heavy Duty Concealed Standard Duty Surface Standard Duty Concealed B. Furnish a 700S overhead stop for doors equipped with regular arm surface type closers that swing more than 140 degrees before striking a wall. If the regular arm door closer being supplied limits the swing to less than 140 degrees, an overhead stop must be supplied any time the door can swing beyond that point. Furnish an overhead stop if a door opens against equipment, casework, sidelights, or other objects that would make wall bumpers inappropriate, and as specified in the hardware groups.

6 2.13 WALL STOPS Description Door Controls Int'l Trimco Ives Hager Concave Wrought Wall Bumper 3211T W1274CSS WS407CCV 236W Hvy. Duty 3-3/4" Projection Wall Stop 3260X 1205 WS11X 255W B. When "wall stop" is called for in hardware group, provide a 3211T. When 3260X or overhead stops are required, they will be specified by product number in the group. C. Wall stops shall not be mounted to casework, cabinet work, sidelights, or equipment. D. Where wall stops are specified, but not applicable, supply an overhead stop as specified in paragraph 2.12.B 2.14 ELECTROMAGNETIC DOOR HOLDERS Description Dorma Rixson LCN Floor Mounted - Single EM-FM24120 FM980 SEM7820 Floor Mounted - Double EM-DFM24120 FM981 Not Available Flush Wall Mount - Std. Catch Plate EM-F24120 FM998 SEM7850 Surface Wall Mount EM-S24120 FM996 SEM7830 B. Provide the voltage as required by electrical THRESHOLDS, SWEEPS, WEATHERSTRIP, DRIP CAPS, GASKET, ASTRAGALS Description National Guard Reese Pemko Threshold 425E S A Sweeps 200NA N Weatherstrip 135N S Drip Caps 16 R Gasket S88 Meeting Stile Astragals 115N N B. Where specified in the hardware groups, furnish the above products unless otherwise detailed DOOR HARDWARE FINISHES A. Unless indicated otherwise in the groups provide finishes as follows: Hinges, exterior: US32D Hinges, interior: US26D Flush Bolts: US26D Exit Devices: US32D Locks and Latches: US26D Pulls, Pushbars, Push/Pull Plates: US32D Coordinators: Prime Coat Painted Door Closers: Painted Aluminum Low Energy Automatic Operators: Painted Aluminum Protective Plates: US32D Overhead Stops: Painted Aluminum Wall Stops: US32D/US26D Electromagnetic Door Holders: Satin Chrome Gasket: Black Thresholds: Mill Aluminum Weatherstrip, Sweeps, Drip Caps: Aluminum 2.17 KEYING

7 A. System: All locks and cylinders shall be keyed to a new master key system. B. Quantity: Provide four (4) Grand Master keys, four (4) Master keys for each Master key set, and three (3) Change keys for each lock or cylinder. C. Meeting: The Hardware Supplier shall prepare a preliminary keying schedule, then meet with the owner to review it and make changes to accommodate the owners requirements. D. Delivery of Keys: Shall be by Registered Mail, or otherwise as requested by the owner, to the individual and address that the owner specifies at the keying meeting. E. Key Cabinet: 1. Acceptable manufacturers and respective catalog numbers: Description M.M.F. Lund Telkee Two Tag Wall Mount Cabinet series 1200 series RWC/AWC series 2. Furnish one key cabinet with a capacity 1-1/2 times the number of key sets. Supply the owner with instructions on how to prepare the numerical, lock location, and key change number indexes, as well as how to maintain the key control system in the future. PART 3 EXECUTION 3.01 EXAMINATION A. Examine doors, frames, and related items for conditions that would prevent the proper application of finish hardware. Do not proceed until defects are corrected INSTALLATION A. Install each hardware item in strict compliance with the manufacturer's printed instructions and recommendations, using only fasteners supplied by, or called for by the manufacturer. B. Set units level, plumb and true to the line and location. Prepare and reinforce the attachment substrate as necessary for proper installation and operation. C. Mortise and cut to close tolerance and conceal evidence of cutting in the finished work. Drill and countersink units which are not factory prepared for anchorage fasteners. D. If manufacturers instructions do not call out a mounting location, refer to the Door and Hardware Institute's publication Recommended Locations for Architectural Hardware. Install wall stops 3210T and 3211T to engage levers or pulls. E. Deliver to the owner one (1) complete set of installation and adjustment instructions, as well as all tools that were furnished with the hardware ADJUSTMENT AND CLEANING A. At final completion, adjust and check each operating item of hardware at each door to ensure proper operation and function of every unit. Lubricate any moving parts that do not operate freely, smoothly, and quietly using only lubricant as recommended by the manufacturer of the hardware item. Replace units that can not be adjusted or lubricated to operate properly. B. Instruct the owners personnel in the proper adjustments of the hardware as needed. C. Clean and restore hardware to the original finish HARDWARE SCHEDULE END OF SECTION