Physical Specification Of Commonly Cast Heat Resistant Alloys
|
|
- Miles Parsons
- 5 years ago
- Views:
Transcription
1 Physical Specificatin Of Cmmnly Cast Heat Resistant Allys Clsest Equivalent Ally IS 4522 Clsest DIN ASTM Gr Micr- Structure Heat Treatment T.S. Kg/mm2 min. Y.S. Kg/mm2 min. Elng-actin min.% Applicatins HA Ferrite Gd xidatin resistance upt 650 Used in il refining industry. 28/4 - - HC - As Cast Gd sulphur and xidatin resistance upt Minimal lad bearing capacity. 5/28 9/ HD Ferrite+ 6 - HE Ferrite Can be used in high sulphur applicatin (avid at C) upt Mre ductile and higher crrsin resistance (avid at 815 C) upt 1050 C fr high S atmsphere. 9/ HF As Cast Suitable fr applicatins requiring high strength & crrsin resistance at 650 C t HH As Cast Suitable fr applicatins between
2 0 0 12/ C and 1093 Nt t be used frm 7500C t 8900C and fr peratins invlving thermal shck & carburizing cnditins. 12/ HH Type2 Fully As Cast Same as HH but with superir creep resistance and reduced ductility. Used frm 650 C t 1000 C under cnstant temperature cnditins. 15/28 20/25 20/ HI Higher crrsin resistance and higher strength at temperature upt 1050C (avid 815C) HK As Cast Suitable fr stressed parts wrking upt 1100C such as billet skids, heat treating trays & fixtures. Unsuited at 815C and in peratins invlving thermal shcks HK40 As Cast Same as HK but with better creep strength. AISI Slutin Annealed Same as HK but Si increased fr greater resistance t carburizatin. HKNb - - HK40 Nb /24 Nb IN519 As Cast Same as HK 40 but with enhanced high temperature resistance upt /20 25/ HL Higher crrsin resistance and higher strength at temperature upt 1100 C (avid 815C). - HN As Cast Suitable fr applicatins upt 1100 C fr furnace parts such as grates,
3 32/20 Nb Castally 800H etc. with increased ductility. As Cast Suitable fr maniflds and headers. Service limit upt 980 C with increased ductility. 35/ HP As Cast Resistant t bth xidizing and carburizing atmspheres at high temperatures upt /25 Nb HP mdified As Cast Same as HP but with enhanced high temperature resistance upt 1100 Suitable fr refrmer ethylene furnace tubes, radiant tubes, etc. HP-M As Cast / HT As Cast Suitable fr highly stressed parts upt 1095 C including fr carburizing peratin. High sulphur gases and thermal shcks are detrimental. 39/ HU As Cast Suitable fr applicatins upt 1095 C including fr carburizing peratins. Can withstand crrsive applicatins with rapid thermal cycles. 45/30 Nbw As Cast Useful fr cmpnents perating in ht zne f pyrlysis cils and cmpnents f Refrmer utlet manifld service limit 1150 C 22H As Cast Same as HP but with enhanced high temperature resistance upt 1150 Suitable fr radiant tubes, air injectin tubes, refrmer tubes and fittings fr petrchemical furnaces, tube sheets, tube
4 supprts, etc. Super 22H As Cast Same as 22H but with enhanced high temperature resistance upt / HW Excellent thermal shck resistance and resistance t carburisatin up t 1040 C where sulphur is nt present. 66/ HX As Cast Fr severe service applicatins upt 1150 C where crrsin resistance is required. Canally Bushes & sleeves fr ht dip galvanizing line. Canally Cntrlled Manganese Bushes & sleeves fr ht dip galvanizing line. UMCO Furnace parts in heat-treating furnaces, slag ntch rings and tundishes. Cbalt Ally 6 Cbalt Ally 12 Cbalt Ally Special - R Wear plates and bars, bushes & sleeves fr peratin in ht & crrsive atmsphere, where lubricatin is impssible, with superir perfrmance. - R Cutting tls and bushes & sleeves peratin in ht & crrsive atmsphere, where lubricatin is impssible, with superir perfrmance Fr better sliding wear prperty. Hardness is between 375 t 432 HRB.
5 40 Ni 60 CrNb 50 Ni 50 CrNb 60 Ni 40 CrNb CY-40 (70Ni15Cr) R ASTM 40/60 Nb ASTM 50/50 Nb - - ASTM 60/40 Nb - - ASTM A494 Gr CY As Cast Suitable fr applicatins upt 950 C in furnace parts. Can withstand fuel ash crrsin. Gd creep strength and gd resistance t xidatin and carburizatin. - As Cast Fr heat resisting and elevated temperature crrsin resistance applicatin such as tube hangers. As Cast Frequently used fr elevated temperature fittings in cnjunctin with Incnel. Suitable fr biler feed water plants and where high strength, high resistance t wear, crrsin and xidatin at elevated temperatures is required.
Chemical Specification Of Commonly Cast Heat Resistant Alloys
hemical Specificatin Of mmnly ast Heat Resistant Allys lsest Equivalent Ally IS 4522 lsest DIN 17445 ASTM - A297 Gr % Ni % r % M % Si % Mn% thers % Applicatins - - - HA 0.20-8.00-10.00 0.90-1.20 0.35-0.65
More informationGuidelines for ASTM Specification and Metal Grades
Guidelines for ASTM Specification and Metal Grades CONTENTS 27/A 27M Standard Specification for Steel Castings, Carbon Suitable For General Applications... 1 A 128/ A 128M Standard Specification for Steel
More informationStainless Steel. What is Stainless Steel 4/1/2013. What is it and how is it made. What we will talk about. Summarize
Stainless Steel What is it and hw is it made Presented by: Rbert (Bb) Drab Quality Manager Crey Steel Cmpany Stainless Steel What it is and hw its made What we will talk abut Define stainless steel What
More informationSandvik Finemac free-cutting wire (Wire)
Datasheet updated 2014 10 20 16:04:46 (supersedes all previus editins) Sandvik Finemac free-cutting wire (Wire) Sandvik Finemac is a lead free, hardenable, free cutting carbn steel characterized by excellent
More informationNickel UNS N02200
Nickel 2 UNS N22 Cmmn trade names Nickel 2, Nickel 99.2 Nickel 2 is 99.6% pure nickel, ne f the tughest metals. The Nickel 2's characteristics include excellent mechanical prperties, a lw gas cntent, lw
More informationLubricants for Textile Industry Spinning / Preparation Machines
Lubricants fr Textile Industry Spinning / Preparatin Machines N. Lubricatin pint (Machine-Cmpnent/-Part) Name f lubricant Characteristics Advantages in applicatin 1 Ring Spinning Frame Tp rller Arbr Speed
More informationStandards & Specifications
Acme Alloys Products Standards & Specifications Page 1 of 12 Standards & Specifications Like any other technology, engineering and science; material science and metallurgy is an ever-widening field with
More informationMg & its Alloys. Introduction: Fig. ( 37 )
Intrductin: Mg is the lightest f the cmmercially engineering metals ( = 1.74 g/cm 3 ) and its structure (c. p. h.). The pure metal is readily available by electrlytic reductin frm seawater. The pure metal
More informationSandvik 20AP (Free-cutting wire)
Datasheet updated 2012 08 03 09:57:37 (supersedes all previus editins) Sandvik 20AP (Free-cutting wire) Sandvik 20AP is a hardenable, free cutting carbn steel characterized by excellent machinability and
More informationANAND ARC ANAND MELT-1
ANAND MELT1 Descriptin Typical Applicatins Classificatins ANAND MELT1 is an agglmerated Flux designed fr Arc Welding f mild, medium and high tensile steels in cmbinatin with ANAND SAW1 (EL8) Grade wire,
More informationMATERIAL AND PROCESS DEVELOPMENTS IN THE MANUFACTURE OF FORK ARMS FOR MATERIALS HANDLING
G.E.Bltn MATERIAL AND PROCESS DEVELOPMENTS IN THE MANUFACTURE OF FORK ARMS FOR MATERIALS HANDLING Technical Directr, MSI Mechfrge, Carr Hill, Balby, Dncaster, DN4 8DH ABSTRACT The mst safety critical item
More informationTECHNICAL DATA INDUSTRIAL WATER CHILLERS AIR COOLED. 1-4 kw Cooling Capacity MADE IN AUSTRALIA HAVCR ENGINEERING SOLUTIONS MAINTAINENCE SERVCIES
TECHNICAL DATA INDUSTRIAL WATER CHILLERS AIR COOLED 1-4 kw Cling Capacity The MIKRO series chillers are a lw capacity unit designed t be installed indrs r utdrs. All THERMEX MIKRO chillers have as standard
More informationWROUGHT HEAT RESISTING ALLOYS PROVIDE COST REDUCTIONS. J. Wilson & J. Kelly Rolled Alloys Temperance, Michigan
WROUGHT HEAT RESISTING ALLOYS PROVIDE COST REDUCTIONS J. Wilson & J. Kelly Rolled Alloys Temperance, Michigan Original Publication ASM Heat Treat Show 1997 Abstract The selection of high temperature materials
More informationNICKEL CHROMIUM ALLOYS
NICKEL CHROMIUM AND NICKEL THORIA ALLOYS 1 NICKEL CHROMIUM ALLOYS Two distinct groups of nickel chromium alloys for high temperature uses are as follow. The first group, which includes cast alloys containing
More informationINDUSTRIAL PROCESS WATER CHILLERS R Series I 2 t 9kW AUSTRALIAN DESIGN, DEVELOPMENT AND MANUFACTURE Aqua Cler Pty Ltd 161 Orchard Rd Chester Hill, NSW, 2162 Australia P +612 9721 9305 F +612 9721 9344
More informationINTEC-High Pressure Steam Generator for closed circuits Series inook
INTEC-High Pressure Steam Generatr fr clsed circuits Series inook 1. Functinality The ink is a High Pressure Steam generatr f vertical design especially develped fr clsed circuits. He is installed directly
More informationFoot Protection Standard
Ft Prtectin Standard Safety and Envirnment Systems Management System Dcumentatin Ft Prtectin Standard 1.0 PURPOSE This standard specifies the selectin, use, inspectin and care f ft prtectin at SaskPwer.
More informationMECHANICAL PROPERTIES AND CORROSION CHARACTERISTICS OF IS400/12 GRADE DUCTILE IRON
MECHANICAL PROPERTIES AND CORROSION CHARACTERISTICS OF IS400/12 GRADE DUCTILE IRON N. D. Prasanna*, M. K. Muralidhara* Mhit Kumar Agarwal* and K. Radhakrishna** *Dept. f Mech.Engg., M. S. Ramaiah Institute
More informationThe moisture susceptibility of a mixture is determined based on the combined effect of material properties as well as mixture properties.
Asphalt Research Cnsrtium Misture Damage Hypthesis The misture susceptibility f a mixture is determined based n the cmbined effect f material prperties as well as mixture prperties. Material prperties
More informationCast Steels for Creep-Resistant Parts Used in Heat Treatment Plants
ARCHIVES of FOUNDRY ENGINEERING DOI: 1.2478/v1266-12-13- Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (2299-2944) Volume 12 Issue 4/212 31 38 Cast Steels
More informationKeep in shape when the heat is on. Kanthal APMT for strength and corrosion resistance at extreme temperatures
Keep in shape when the heat is on Kanthal APMT for strength and corrosion resistance at extreme temperatures Superior performance when the heat is on When furnace temperatures reach as high as 1250 C (2282
More informationStoughton High School. HVAC System: Basis of Design.
Stughtn High Schl HVAC System: Basis f Design. 1 Basis f Design Criteria Occupant Thermal Cmfrt Indr Air Quality Energy Efficiency / Envirnmental Impact System Nise First Cst / Return n Investment Maintenance
More informationPRODUCT PROFILE. SN100CLe
PRODUCT PROFILE ELECTROLOY in partnership with FCT Asia Pte Limited in Manufacturing Nihn Superir Lead Free Slder Bar SN100CL Prduct Name Prduct Cde LEAD FREE BAR LEAD FREE BAR (TOP UP ALLOY) SN100CL SN100CLe
More informationModule 2: Solid Fossil Fuel (Coal) Lecture 13: Coal liquefaction
1 P age Mdule 2: Slid Fssil Fuel (Cal) Lecture 13: Cal liquefactin IIT Kharagpur NPTEL Phase II Web Curses 2 P age Keywrds: Direct cal liquefactin, indirect cal liquefactin, EDS prcess, H-cal prcess 2.5
More informationFoot Protection Standard
Ft Prtectin Standard Safety and Envirnment Systems Management System Dcumentatin Ft Prtectin Standard 1.0 PURPOSE This standard specifies the selectin, use, inspectin and care f ft prtectin at SaskPwer.
More informationProgrammable, adjustable constant output current which can be adjusted to match LED module requirements
Rev. 1.3 2017. 12. 08 1 Prgrammable Multi-Channel Driver PMD-25D-SU SLP-DUA025DAWW Key Features Prgrammable, adjustable cnstant utput current which can be adjusted t match LED mdule requirements Device
More informationATTACHMENT. to ISO 9001:2008 certificate of approval No N dated 9 January 2018, expiring on 14 September 2018 issued to: Fondinox S.p.A.
to ISO 9001:2008 certificate of approval No N. 0029990 dated 9 January 2018, expiring on 14 September 2018 issued to: Fondinox S.p.A. Via Marconi 42/48, 26010 Sergnano (Cremona) Italia The Quality Management
More informationPremium-6 Hexagonal Wire Netting for roofing applications
CONTENTS SUMMARY OF FEATURES... 2 TECHNICAL INFORMATION... 2 Prduct Descriptin... 2 Applicatins... 2 Prduct Infrmatin... 2 Handling & Strage... 4 Technical Data... 4 Installatin infrmatin... 4 Size Range
More informationMETAL-CUTTING CIRCULAR SAW BLADES
METAL-UTTING IRULAR SAW BLADES TEHNIAL ATÁLOGO TÉNIO ATALOGUE SIERRAS METAL-UTTING IRULARES IRULAR PARA METALES SAW BLADES Three generatins We are specialists in the prductin f cutting tls fr the metallurgical
More informationBorn from fire, made to endure NICKEL ALLOYS
Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster
More informationHL STRATEGIC INITIATIVES
HL7 2012 STRATEGIC INITIATIVES 1 S T R AT E G I C INI TI AT I V E S - SUM M AR Y HL7 Recgnitin: Attain recgnitin as the lead develper and harmnizer f glbal technical and functinal health infrmatics standards
More informationHeat-resistant alloys for hydrocarbon processing
Heat-resistant alloys for hydrocarbon processing MANOIR PETROCHEM Owned by Sun Capital Partners, an American investment fund, the Manoir Industries Group, a specialist in steel transfor mation through
More informationPOLYBRIDGE Training Ltd
Injectin Mulding Training Injectin Mulding Appreciatin Thery & Practice 2 day curse POLYBRIDGE Training Ltd Training Dates 2014 January March May 20 th & 21 st 18 th & 19 th 18 th & 19 th inf@plybridgetraining.c.uk
More informationMaterials & Processes in Manufacturing. Introduction. Introduction ME 151. Chapter 6 Ferrous Metals and Alloys
2003 Bill Young Materials & Processes in Manufacturing ME 151 Chapter 6 Ferrous Metals and Alloys 1 Introduction Figure 6-1 Page 106 2003 Bill Young 2 Introduction Metals are example of a material (The
More informationJ.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
More informationNEW LINE. of saw blades in our offer
NEW LINE f saw blades in ur ffer HM saw blades MULTIX PRO fr raw wd ripping 207 IMPACT RESISTANT LONGER LIFETIME The use f a new type f sintered carbide with increased impact resistance allws the efficient
More informationVAJ2FM013/GM013 SERIES SOLENOID OPERATED SPOOL VALVES
Iss 22, Octber 2013 INSTALLATION, OPERATION AND MAINTENANCE MANUAL VAJ2FM013/GM013 SERIES SOLENOID OPERATED SPOOL VALVES 5/2 WAY 1 Iss 22, Octber 2013 01. INTRODUCTION This manual prvides infrmatin n installatin,
More informationSaving Energy using PICVs
Saving Energy using PICVs Hw Dynamic-Balancing f Hydrnic Systems Yields up t 30% in Energy Distributin Savings Keeping temperatures under cntrl PICVs cmbine cst savings and cmfrt Pressure-independent cmbi
More information3-digit Nrth American Industrial Classificatin System (NAICS) Electr-Technlgy Fd 311 Beverage & Tbacc 312 Textile Mills & Prducts 313; Textile Prduct Mills 314 Clthing Mfgrs 315 Leather & Allied 316 Wd
More informationAlloy 20 29Ni-20.5Cr-3.5Cu-2.5Mo A351 CN7M J Mo 20Cr-18Ni-6.5Mo-N-Cu A351 CK3MCuN J93254
The typical Austentic Stainless Steel 18%Cr + 10% Ni have been adopted in corrosion resistant application for decades. In accordance with more and more application, the typical Austentic stainless steel
More informationPRODUCT PROFILE ELECTROLOY LEAD FREE BAR
PRODUCT PROFILE ELECTROLOY LEAD FREE BAR Prduct Name Prduct Cde SOLDER BAR LEAD FREE ALLOY Sn99.0/Ag0.3/Cu0.7+Bi LF- 315XB LEAD FREE ALLOY Sn99.7/Ag0.3+Bi LF- 315XBE (TOP UP ALLOY) The infrmatin and statements
More informationBase Models: 1-22SV Major Components GOULDS PUMPS. Commercial Water
Base Models: 1-22SV Base Models: 1-22SV F, P, R VERSIONS 1 Pump Body Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 2 Impeller Stainless Steel AISI 304 EN 10088-1-X5-CrNi-10 (1.4301) 3 Diffuser
More informationMGS22 - MGS 32 VERY HIGH PRESSURE SOLID-FRONT PRESSURE GAUGES
INDUSTRIAL INSTRUMENTATION FOR PRESSURE AND TEMPERATURE NUOVA FIMA S.P.A. CAP. SOC.. 1.300.000 IV. VIA C. BATTISTI, 59/61 28045 INVORIO (NO) ITALY TEL. +39 0322 253200 FAX +39 0322 253232 http://www.nuvafima.cm
More informationGanado Unified School District (Welding I / 11 th Grade)
Ganad Unified Schl District ( I / 11 th Grade) PACING Guide SY 2014-2015 Timeline & Resurces AZ Cmmn Cre Standards Essential Questin 1 st QTR: (HESS Matrix) Learning Gal Vcabulary (Cntent/Academic) Mdule
More informationThe facts speak for themselves
The facts speak for themselves If you install the most sophisticated radiant tubing in your gas-heated furnace, it will enhance your operation to produce optimum yields. At Kanthal we have a unique knowledge
More informationSYSTEM FOR MEASUREMENT AND IMPROVEMENT OF PRODUCTIVITY SYMAPRO
SYSTEM FOR MEASUREMENT AND IMPROVEMENT OF PRODUCTIVITY TRAINING AND PRODUCTIVITy. symapr GUIDE 11 What is the? The is a permanent, hlistic and inclusive learning system in rganizatins that is geared t
More informationGanado Unified School District (Welding II)
Ganad Unified Schl District ( II) PACING Guide SY 2017-2018 Timeline & Resurces 1 st QTR: Mdule 29201-09 Symbls AZ Cllege and Career Readiness Standard. STANDARD 1.0 LAYOUT AND FIT UP PROJECT FROM BLUEPRINTS
More informationMaterials for elevated temperature heat exchangers in reactors
Materials for elevated temperature heat exchangers in reactors Several materials have been introduced for heat exchangers in 4 th generation extremely high temperature reactor (EHTR) also called as next
More informationProgrammable, adjustable constant output current which can be adjusted to match LED module requirements
Rev. 2.7 2017. 10. 23 1 Prgrammable Multi-Channel Driver PMD-75C-LU SLP-DUA47531WW Key Features Prgrammable, adjustable cnstant utput current which can be adjusted t match LED mdule requirements Native
More informationFAA Program Update on Additive Manufacturing
FAA Prgram Update n By: Rbert Grant Date: Outline State f (AM) What Is AM Challenges T Be Addressed Examples f Risk Factrs fr AM Surces f Variability Regulatry Requirements Recent FAA Activities invlving
More informationCustomisation for low volumes at affordable costs, to make YOU competitive
Custmisatin fr lw vlumes at affrdable csts, t make YOU cmpetitive COMPACT PROCESS INDUSTRIAL FLAMEPROOF with IECEx CC OVED APPR www.rin-instruments.cm Bulletin N. : KA120430 Abut Us Established in 1977,
More informationPOLYBRIDGE Training Ltd
Injectin Mulding Training Injectin Mulding Appreciatin Thery & Practice 2 day curse POLYBRIDGE Training Ltd Training Dates 2014 January March May 20 th & 21 st 18 th & 19 th 18 th & 19 th inf@plybridgetraining.c.uk
More informationBHARAT HEAVY ELECTRICALS LIMITED RAMACHANDRAPURAM:: HYDERABAD , INDIA
BHARAT HEAVY ELECTRICALS LIMITED RAMACHANDRAPURAM:: -500 032, INDIA Enq:- D1A1N16713 Sub: Qualifying criteria fr the vendrs participating in "pen tender" t supply BQ Plates t BHEL Hyderabad Reg. * * *
More informationMICROSTRUCTURAL CHANGES OF THERMALLY SPRAYED COATINGS AFTER HIGH TEMPERATURE CYCLING
18. 2. 5. 21, Ržnv pd Radhštěm, Česká Republika MICROSTRUCTURAL CHANGES OF THERMALLY SPRAYED COATINGS AFTER HIGH TEMPERATURE CYCLING Rstislav MEDLÍN a, Olga BLÁHOVÁ a, František ZAHÁLKA b, Jan ŘÍHA a a
More informationManaging Supply Chain with Third Party Logistics Provider an Overview of the Integration
Managing Supply Chain with Third Party Lgistics Prvider an Overview f the Integratin Applies t: Supply Chain Management Summary Businesses have t manage their Supply Chain effectively t prvide Rapid Respnse
More informationARCANOL ROLLING BEARING-TESTED GREASE
ARCANOL ROLLING BEARING-TESTED GREASE Fr a lnger bearing life: FAG rlling bearing grease FAG Kugelfischer Gerg Schäfer AG Industrial Bearings and Services A GREASE HAS A LONG WAY TO GO BEFORE IT MAY CALL
More informationInstruction for Correct Installation
Instructin fr Crrect Installatin Figure 1 Figure a. T btain a unifrm rtary mtin always use either tw ppsite single jints r ne duble jin. The pillw blcks are t be psitined as clse as pssible t the jints
More informationDelivering World Class Support Services
The Cmpass Service Framewrk Delivering Wrld Class Supprt Services Our Standard Operating Platfrm The Cmpass Service Framewrk (CSF) is ur Standard Operating platfrm develped t deliver high quality and efficient
More informationTopics on Heavy Oil. Production and Processing
One-Day Wrkshp n Heavy Oil Tpics n Heavy Oil Prductin and Prcessing Organizer: Oil and Gas Exp 2015 http://il-gas.micsgrup.cm/ Speaker: Prf. M. R. Riazi www.riazim.cm Venue: Crwn Plaza Dubai - UAE http://www.ihg.cm/crwneplaza/htels/gb/en/dubai/dubtc/hteldetail
More informationCCWE**H, CCWE**H11 CCWE**E, CCWE**E10 COP (W/W) 5.8~ ~ ~7.2 Compression stage Capacity (Ton)
hiller Water cled centrifugal chiller With half century technlgy imprvement Midea H series centrifugal chiller ffers custmer high reliability and excellent perfrmance. Full prduct range frm 00 t 00Tn in
More informationKCP&L LaCygne Unit 1 - CFD Modeling for SCR Optimization
February 5, 2014 KCP&L LaCygne Unit 1 - CFD Mdeling fr SCR Optimizatin EUEC Cnference 2014 Reid Thmas AGENDA KCPL Prblem Statement Flue gas flw maldistributin and excessive flyash pluggage in LaCygne 1
More informationPot Magnets. If you don t find a standard pot in our program that meets your requirements, please contact us for assistance.
Hlding frce in % Pt Magnets Pwerful hlding frce with permanent magnets and directed magnetic field Sura Pt magnets are widely used fr many different applicatins in all types f industry all ver the wrld.
More informationAlloys SUPER SQUARE
Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7
More informationNB SEMIPLATE NI 100 Nickelsulfamate process
NB SEMIPLATE NI 100 Nickelsulfamate prcess INTRODUCTION NB SEMIPLATE NI 100 is a nickelsulfamate electrplating prcess that prduces a pure, ductile, finegrained, semi-bright lw stress nickel depsit required
More informationInnovative Resin Technologies for. World Class PWR Chemistry Operations. September 4 & 5, 2008
Innvative Resin Technlgies fr Wrld Class PWR Chemistry Operatins September 4 & 5, 2008 Intrductin Graver Technlgies principal custmer is the pwer utility. We are fcused n the business and supprt fr thse
More informationIt is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
More informationLOW HEAT INPUT WELDING ALLOYS
ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,
More informationTHERMAL ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING MAT LAB AND FLOEFD SOFTWARE
IJRET: Internatinal Jurnal f Research in Engineering and Technlgy ISSN: 319-1163 THERMAL ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING MAT LAB AND FLOEFD SOFTWARE A.GpiChand 1, A. V. N. L. Sharma, G.
More informationSHIELDED METAL ARC WELDING ELECTRODES/MANUAL METAL ARC WELDING ELECTRODES
SHIELDED METAL ARC WELDING ELECTRODES/MANUAL METAL ARC WELDING ELECTRODES CELLUTHERME CELLUTHERME-M CODIFICATION : AWS : E6010 IS : EC4310X Cellutherme is a light cated cellulsic type DC(+) electrde. Ideally
More informationTechnical Welding. Course Design EASTERN ARIZONA COLLEGE Industrial Technology Education. Technical Welding
Curse Infrmatin Organizatin Divisin Curse Number MSP 210 Title Credits 2 Develped by Lecture/Lab Rati Transfer Status Activity Curse Technical Welding Curse Design 2005-2006 EASTERN ARIZONA COLLEGE Industrial
More informationModel Library Industrial Utilities
Mdel Library Industrial Utilities The mdel library Industrial Utilities is a tlbx cntaining the cmmn utilities used in the pwer engineering industry: Cmpressed air generatin device Heat pump/chiller Gas
More informationREMI - Outline performance and technical specifications
REfurbishment as Manufacturing Industry REMI Prject 24 May 2016 REMI - Outline perfrmance and technical specificatins WP2.2 - WP3.1 Deliverable Intrductin The cncept f deep retrfit is nt new. The main
More informationIntroduction to Stainless Steels p. 1 Production of Stainless Steels p. 1 Applications for Stainless Steels p. 1 Designations for Wrought Stainless
Foreword p. vi Preface p. vii Introduction to Stainless Steels p. 1 Production of Stainless Steels p. 1 Applications for Stainless Steels p. 1 Designations for Wrought Stainless Steels p. 2 Designations
More informationPrinciples for Sound Stress Testing Practices and Supervision
P1.T4. Valuatin & Risk Mdels Principles fr Sund Stress Testing Practices and Supervisin Binic Turtle FRM Study Ntes By David Harper, CFA FRM CIPM www.binicturtle.cm Principles fr Sund Stress Testing Practices
More information5, 7, 9, 11 ROLLER HOT DOG COOKER/GRILLERS OPERATING MANUAL
Pictured: Ultra Dawg 11 Rller Ht Dg Machine 4095 Cmmercial Ht Dg Machine 5, 7, 9, 11 ROLLER HOT DOG COOKER/GRILLERS OPERATING MANUAL Cpyright 2010 DTX Internatinal B I G D A W G / T O P D A W G / M A D
More informationBest Practices in Selecting Coatings and Pottings for Solar Panel Systems; Junction Boxes and Inverters
Best Practices in Selecting Catings and Pttings fr Slar Panel Systems; Junctin Bxes and Inverters DfR Slutins, HB Fuller and Tnsan 2004-2007 2010 9000 Virginia Manr Rd Ste 290, Beltsville MD 20705 301-474-0607
More informationSIRIUS 253: A rare earth containing heat resistant steel. Thermal conductivity (W.m - 1.K - 1 ) Resistivity
Indu SIRIUS 253 SIRIUS 253: A rare earth containing heat resistant SIRIUS 253 grade is a fully austenitic stainless containing 21 Cr, 1.7 Si, 0.17N and Rare Earth elements (cerium, lanthane,...) which
More informationCTG-05 LED Grow Light
Shenzhen CT Lighting C.,Ltd CTG-05 LED Grw Light 300W Water Prf LED Grw Light fr Greenhuse Pattern N. 201120089570.4 Technical Specificatin Release Versin: V2.1 Release Date: 2011/3/6 TEL:+86-755-33866388
More informationSIRIUS 314: A 25% Cr - 1.8% Si Heat Resistant Stainless Steel. Thermal conductivity (W.m - 1.K - 1 ) Resistivity
Industeel SIRIUS 314 SIRIUS 314: A 25% Cr - 1.8% Si Heat Resistant Stainless Steel SIRIUS 314 grade is a fully austenitic stainless steel containing 25% Cr, 20% Ni and 1.8% Si. The alloy is designed for
More informationGlossary of Steel Terms
Glossary of Steel Terms Steel Terms Explained. Below we list some of the most common steel terms and explain what they mean. AISI Alloy Alloy Steel Annealing ASTM Austenitic Bar Brinell (HB) Bright Drawn
More informationThe Development of High Strength Steel Plate with Improved Toughness and Weldability for Steel Box Girder of Elevated Highway Application
The Development of High Strength Steel Plate with Improved Toughness and Weldability for Steel Box Girder of Elevated Highway Application Zaenal A. Muslim, Anang Sya roni, Syahriar Fakhrurrozi 2017 Introduction
More informationEnergy Management Program. Durez Canada Company Ltd By Anyssa Mohammed & Mandy Wychreschuk
Energy Management Prgram Durez Canada Cmpany Ltd By Anyssa Mhammed & Mandy Wychreschuk Agenda 1. Intrductin 2. Energy Management Relatinship t Safety 3. Site Utility Csts 4. Energy Prgram Initiative 5.
More informationTrademarks. Appendix I. A number of alloys discussed in this publication are marketed under trademarks.
Appendix I Trademarks A number of alloys discussed in this publication are marketed under trademarks. Trademark Alumel AM 350 AM 355 Chromel Duranickel Hastelloy HNM Illium Incoloy Inconel Invar Iso-Elastic
More informationConnect for SAP (Classic)
Cnnect fr SAP (Classic) Fact Sheet 1 Abut Cnnect fr SAP (Classic) Cnnect fr SAP is an bject-riented sftware library. It has been specially designed fr an access t SAP applicatin servers by using Embarcader
More informationTypes of Metal Alloys
Types of Metal Alloys Metal alloys Ferrous Nonferrous Steels Cast iron 257 Uses low carbon
More informationFABLAB SAFETY SAFETY GUIDELINES OF FABLAB SEOUL Eduardo Chamorro
FABLAB SAFETY SAFETY GUIDELINES OF FABLAB SEOUL 2016-Eduard Chamrr CONTENT- FAB LAB SAFETY MANUAL 1 NOISE EXPOSURE: 2 EYE PROTECTION: 3 RESPIRATORY PROTECTION: 4 SKIN PROTECTION: 5 HOT THINGS ARE HOT:
More informationDECK PERMIT INFORMATION
DECK PERMIT INFORMATION REQUIRED INFORMATION: 1) A Plt Plan shwing the prpsed deck with the distances t the side rear and frnt f prperty lines. Als, shw lcatins f existing structures and septic system
More informationshort name: NR* technical product sheet created :57 1/10 seamless tube EN tol. acc. EN/ISO 1127 NR ,0 0,075 4,0 0,125
technical product sheet short name: NR* seamless tube EN 10216-5 tol. acc. EN/ISO 1127 Art.-Nr. kg s D NR-033-020 NR-030-040 NR-030-030 NR-030-020 NR-030-016 NR-028-035 NR-026-032 NR-026-026 NR-026-023
More informationEpicor Commerce Connect (ECC) Services Specification
Epicr Cmmerce Cnnect (ECC) Services Specificatin This Epicr Cmmerce Cnnect Services Specificatin ( Specificatin ) utlines the services and services levels assciated with Epicr s delivery f its Epicr Cmmerce
More informationWelding. Course Design
Welding Curse Design 2007-2008 Curse Infrmatin Organizatin Eastern Arizna Cllege Divisin Industrial Technlgy Educatin Curse Number MSP 110 Title Welding Credits 2 Develped by Newell Dryden Lecture/Lab
More informationHigh Temperature Micro MDM Connector Series. Features & Benefits
High Temperature Micr MDM nnectr Features & Benefits Reliable. Durable. Versatile. ITT annn s High Temperature Micr MDM nnectrs are designed t perfrm in the harshest and mst demanding envirnments With
More informationProposed EASR Regulation Standard Systems and Equipment. AWMA Breakfast Sessions Fall 2013
Prpsed EASR Regulatin Standard Systems and Equipment AWMA Breakfast Sessins Fall 2013 What This Presentatin Will Cver New prpsed activities t be added t the EASR Prpsed exemptins t be added t O. Reg. 524/98
More informationJob Related Information
TO prvide Jb Related Infrmatin This dcument includes infrmatin abut the rle fr which yu are applying and the infrmatin yu will need t prvide with yur applicatin. 1. Rle Details Vacancy reference 13456
More informationOur technical capabilities Moulding department 2 rapid prototyping machines 1 supervisor 50 ton continuous mixer 20 ton continuous mixer
MANUFACTURING AND T Factory area Total area 20 000 m 2 Surface covered 10 000 m 2 Surface for administration 1 200 m 2 Our technical capabilities Moulding department 2 rapid prototyping machines 1 supervisor
More informationINNEGRA TECHNOLOGIES. Corporate Presentation. 2014: Ver. 4
INNEGRA TECHNOLOGIES Crprate Presentatin 2014: Ver. 4 Our Cmpany Innegra Fiber was develped in Greenville SC 2004-2008 Cmmercial prductin began 2009 Extensive dmestic & internatinal patent prtfli INNEGRA
More informationBismuth-free Stainless Flux-Cored Wires for High Service Temperatures
Bismuth-free Stainless Flux-Cored Wires for High Service Temperatures voestalpine Böhler Welding www.voestalpine.com/welding Lasting Connections Creating lasting connections is the most important part
More informationHygienic Sliding Doors Complete Solutions
Hygienic Sliding Drs Cmplete Slutins Chsen by by the the wrld s leading pharma, fd and healthcare cmpanies Acustic Drs Cldstre Drs Fire Drs FRP Drs Glass Drs GRP Drs Hermetic Drs Hygienic Drs Rapid Rll
More informationNB SEMIPLATE CU 100 Copper electroplating process
NB SEMIPLATE CU 100 Cpper electrplating prcess INTRODUCTION The NB SEMIPLATE CU 100 prcess is an acid cpper plating frmulatin engineered fr wafer plating applicatins including cpper bump plating, intercnnects
More information