Improvements to the Distribution Pipe Lines in Zalengi, Central Darfur Please insert the currency Item Description
|
|
|
- Wilfrid Morris
- 6 years ago
- Views:
Transcription
1 RETURNABLE BID SCHEDULE 4 BILL OF QUANTITIES Case No. SDPC/76613/WORKS/ITB056 Improvements to the Distribution Pipe Lines in Zalengi, Central Darfur Please insert the currency 1 General 1 Mobilization & Demobilization 1.1 Mobilization of Contractor's resources to the work and Demobilization at the end of completion of the works ST 1 Sub toatal of General Items sum 1 2 Supply of Pipe line material 2.1 Supply of HDPE materialsall Polyethylene material shall be PE 100,PN 10 SDR 17 ( unless otherwise stated ) suitable for butt fusion jointing and the rate shall include for supply and delivery to the work site of all pipes, fittings & specials including all other associated accessories such as gaskets, backing rings (to suite PN 16flange), bolts and nuts, etc. required for complete installation. HDPE Pipes OD 160,PN 10,SDR 17 pipes ( for eastern side) m OD 110,PN 10,SDR 17 pipes ( for eastern side) m OD 110,PN 10,SDR 17 pipes ( for western side) OD 63,PN 10,SDR 17 pipes (for eastern side) m 2200 HDPE Stub flanges OD 160 stub flange complete with DN 150 backing ring, nuts and bolts 2 HDPE Bends OD 110mm, OD 63mm,90 2 HDPE Tees for Junctions x160 tee x110 tee 1 UNOPS SDOC BOQ TM 1
2 x110 tee x63 tee 7 HDPE Reducers x110 1 End Caps mm mm Supply of DI materials Supply and delivery at site all DI pipes, fittings, specials & valves including rubber rings, lubricant, gaskets, bolts and nuts, denso or equivalent Double flange DI gate Valves DN 150 sluice valve for junctions 2 DI tapping saddles for air valves To suit200 HDPE pipe with 25mm treaded To suit 160 HDPE pipe with 25mm treaded To suit 110 HDPE pipe with 25mm treaded 10 PPR/DI tapping saddles for branches x 63 tapping saddle with suitable adapter to connect 63mm HDPE pipe 3 Flange Adapters suite HDPEs DN 150 for suite 160 HDPE 2 Lockable Surface boxes x 150 for valve installation 2 ST 2 sub Total of supply items 3 Supply of machinary for pipe welding Both welding machine and the generator shall be used during installation and should be handed over to UWA at the completion. 3.1 Supply of HDPE butt fusion welding machine to weld pipes diameter ranging from 63 mm (2') to 160mm (6"). 1 UNOPS SDOC BOQ TM 2
3 3.2 Industrial type gasoline generator (minimum 3 kw)in order to operate the HPPE welding machine above. ST 3 sub Total of supply machinary for pipe welding 1 4 Construction & Installations 4.1 Earth Works & Pipe Laying Earth work rate shall include for back filling, shoring, Excavation for pipe trenches for 160mm pipes in any material other than rock with a m 500 maximum depth not exceeding 1.1m Ditto, for depth of excavation exceeding 1.1m m Excavation for pipe trenches for 110mm pipes in any material other than rock with a m 1500 maximum depth not exceeding 1.0m Ditto, for depth of excavation exceeding 1.0m m Excavation for pipe trenches for 63mm pipes in any material other than rock with a maximum depth not exceeding 0.75m Extra over for item s. From to for excavation in rock (Provisional Quantity) Selected material for back filling & compaction of pipe trench as directed by the Engineer (Provisional Quantity) Laying and Jointing or Fixing in Open Trench OD 160mm HDPE pipes with Butt Fusion Welded Joints in all depth with Type "A" bedding as depicted in drawings m 2200 m 3 10 m m Ditto, for 110 HDPE pipes m Ditto, for 63 HDPE pipes m Extraover to 4.1.8,4.1.9 & with provision of Type" B"bedding where required (Provisional Quantity). m Ditto, for Type "C" Bedding (Provisional Quantity). m Ditto, for Type "D" Bedding (Provisional Quantity). m Installation of HDPE Fittings Installation of HDPE stub flanges, The rate shall include for additional,butt fusion Installation of OD 160 stub flange complete with backing ring, nuts and bolts in 2 Installation of HDPE bends, The rate shall include for additional,butt fusion UNOPS SDOC BOQ TM 3
4 4.2.2 OD 315mm, OD 250mm, OD 160mm, OD 160mm, OD 110mm, OD 110mm,45 6 Installation of HDPE Tees, The rate shall include for additional,butt fusion welding, excavation, shoring, dewatering, etc. necessary for the complete installation. HDPE Tees in Junctions x160 tee x110 tee x110 tee 1 Installation of HDPE Reducers, The rate shall include for additional,butt fusion welding, excavation, shoring, dewatering, etc. necessary for the complete installation x110 1 Installation of end caps mm mm Installation of Valves Installation of DN 150Sluice Valve in HDPE pipe junctions including flange adapters Installation of 25 mm dia sigle orifice air valve with isolation cock including tapping Connecting to exsting pipe lines Installation of tapping saddle in existing 160 HDPE line to make 63mm barnch including exposing the pipe Extraover to the installation of Valves,Falnge adaptors,and HDPE fittings,expose the existing pipe line and cut the required length and making connction at J22A & J22 tank premises. 3 sum Extraover to the installation of Valves,Falnge adaptors,and HDPE fittings,expose sum 1 UNOPS SDOC BOQ TM 4
5 4.4.4 Chamber construction and concrete works Construction of air valve chamber with brick work as depicted in drawings for single orifice air valves. Rate shall be included supply and installation of galvanized chequerd plate cover with locking arrangement installation of 150 surface box with Grade 25 concrete for sluice valves as depicted in the drawing. Rate shall include for supplying and fixing 150mm heave duty GS protective pipe and concrete for the valve support. ST4 sub total of installations Testing & Commissioning handover Hydraulic pressure testing and disinfection of OD 160mm dia. PE pipeline. The rate shall include for supply of water and provision of necessary equipment to complete the hydraulic pressure testing in the presence of state Water Corporation representative & the preparation of hydraulic pressure testing report m Ditto, for 110 HDPE pipes m Ditto, for 63 HDPE pipes m 2200 ST5sub total oftesting & Commissioning handover A Total cost (Total of ST1,ST2,ST3,ST4 & ST5) B Contingency (5%) (Ax5%) C Grand Total (A+B) UNOPS SDOC BOQ TM 5
Annex III - Bill of Quantity PREAMBLE TO BILL OF QUANTITIES BILL OF QUANTITIES DAY WORKS RATES
Annex III - Bill of Quantity PREAMBLE TO BILL OF QUANTITIES BILL OF QUANTITIES DAY WORKS RATES Table of Contents PREAMBLE TO BILL OF QUANTITIES TABLE OF CONTENTS Page Nr. PREAMBLE TO BILLS OF QUANTITIES
ANNEX 3 DETAILED PRICE SCHEDULE RELATED TO THE BILL OF QUANTITIES 1. GENERAL DESCRIPTION OF ITEMS PRICES TO BE FULLY INCLUSIVE...
ANNEX 3 DETAILED PRICE SCHEDULE RELATED TO THE BILL OF QUANTITIES 1. GENERAL... 3 2. DESCRIPTION OF ITEMS... 5 3. PRICES TO BE FULLY INCLUSIVE... 5 4. COVERAGE... 6 5. BIDDER TO PRICE EACH ITEM... 6 6.
BILL OF QUANTITY ENGINEERING & MANAGEMENT CONSULTING CENTRE. "Beit Hanoun Emergency Water Supply Project"
"Beit Hanoun Emergency Water Supply Project" " Rehabilitation and Construction of Beit Hanoun Water Network " BILL OF QUANTITY ENGINEERING & MANAGEMENT CONSULTING CENTRE Bill of Quantities PREAMBLE TO
A Provide for Contractor's Office, Store etc. Sum
BILL NO.1 - PRELIMINARIES AND GENERAL CONDITIONS A Provide for Contractor's Office, Store etc. Sum B C Provide for Insurance in accordance with the Conditions of the Contract. Allow for the provision of
Price Schedule 1 1. GENERAL DESCRIPTION OF ITEMS PRICES TO BE FULLY INCLUSIVE COVERAGE BIDDER TO PRICE EACH ITEM...
Price Schedule 1 1. GENERAL... 3 2. DESCRIPTION OF ITEMS... 5 3. PRICES TO BE FULLY INCLUSIVE... 5 4. COVERAGE... 6 5. BIDDER TO PRICE EACH ITEM... 6 6. DESCRIPANCIES BETWEEN RATES... 6 7. MEASUREMENT...
SECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE)
SECTION 02623 HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE) PART 1 - GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install high density
PLASTIC FITTINGS Avenue Edmonton, AB Canada T6E 5Z7. Toll Free: Phone: (780) Fax: (780)
9333 45 Avenue Edmonton, AB Toll Free: 1-800-272-9693 Phone: (780) 436-1930 Fax: (780) 435-4849 info@can-con.com TABLE OF CONTENTS PLASTIC FITTINGS POLYETHYLENE PIPE...- 1 - SERVICE RISERS... - 3 - TRANSITION
Description Unit Quantity Rate Kshs. Amount Kshs.
BILL No.1 40m3 MASONRY STORAGE TANK No. Description Unit Quantity Rate Kshs. Amount Kshs. 1 SETTING OUT AND EARTH WORKS 1.1 General site clearance and setting out 1.2 Excavate over site 200mm to remove
PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK
EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/20182019/C2: SUPPLY OF PIPE FITTINGS, NON REVENUE
PART A : CPVC PIPES AND FITTNGS (EXTERNAL WATERSUPPLY):
PART A : CPVC PIPES AND FITTNGS (EXTERNAL WATERSUPPLY): 01 Providing and Fixing of CPVC pipes confirming to ASTM standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
Bill of Quantity (BOQ)
Bill of Quantity (BOQ) PART-I : FIRE FIGHTING SYSTEM. Sr No Description Qty Unit Rate/Unit Amount 1 Dismantling, loading, shifting and unloading of following Fire Fighting Equipments from Berth No.8 to
CALAVERAS COUNTY WATER DISTRICT Ebbetts Pass Water System Reach 3A Pipeline Replacement Project CCWD CIP No ADDENDUM 2
CALAVERAS COUNTY WATER DISTRICT Ebbetts Pass Water System Reach 3A Pipeline Replacement Project CCWD CIP No. 11078 ADDENDUM 2 Date Issued: December 2, 2015 **** Receipt of addenda must be acknowledged
Bill No.1: Preliminaries
Bill No.1: Preliminaries Item No. Description of Works Qty. 1 Mobilization 1.1 This item should include site office for the use of the Engineer's and Employer's staffs with the necessary facilities, furniture,
Large Diameter Piping System DURABLE PE-PIPING SYSTEM FOR HIGH- VOLUME FLOW
Large Diameter Piping System DURABLE PE-PIPING SYSTEM FOR HIGH- VOLUME FLOW 1 The Plastics Experts. AGRU Pipe & Fitting Systems offer a complete range of high-quality pipes, fittings, valves and customized
TITLE: SLAUGHTER HOUSE SEPTIC TANK. ITEM No. D E S C R I P T I O N UNIT QTY
D DEMOLITION & SITE CLEARANCE D1 GENERAL CLEARANCE 6-D152 Open bush and thicket in and around ha 0.02 the ponds. Locally disposed. D2 REMOVAL OF TREES AND STUMPS 6-D212 Trees of girth: 150 mm - 500 mm
ARTICLE 26 UTILITY LINE INSTALLATION REQUIREMENTS
UTILITY LINE INSTALLATION REQUIREMENTS Index 26.01 JACK AND BORE OPERATIONS 26.02 PRESSURE PIPE RESTRAINT 26.03 PRESSURE CONNECTION BACK TO TABLE OF CONTENTS Section 26.01 JACK AND BORE OPERATIONS 26.01.01
SUPPLEMENTARY SECTION: STANDARD SPECIFICATIONS PAGE 1 STORMWATER MAINS & CULVERTS MAY 2018
STANDARD SPECIFICATIONS PAGE 1 STORMWATER MAINS & CULVERTS MAY 2018 PART 1 - GENERAL... 2 1.1 Work Included... 2 1.2 Related Sections... 2 1.3 Reference Standards... 2 1.4 Shop Drawings... 3 1.5 Certificates...
COMPLETE REVISION October Process Industry Practices Piping. PIP PNSC0036 High Density Polyethylene (HDPE) Piping Installation Specification
Piping High Density Polyethylene (HDPE) Piping Installation Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
The Manitoba Water Services Board SECTION Standard Construction Specifications September 2013 Page 1 of 5
September 2013 Page 1 of 5 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work described herein shall consist of the construction of a water intake including: The supply and installation of pipe and appurtenances
Hydroelectricity Pipeline Services
2013 Hydroelectricity Pipeline Services Design Installation Rehabilitation Where Smart Solutions Flow Hydroelectricity Pipeline Services Harnessing the Power of Water RadiusPLUS have the skills and competency
SECTION 401 WATER PIPE AND FITTINGS 2.2 POLYVINYL CHLORIDE (PVC) PIPE AND FITTINGS
SECTION 401 PIPE AND FITTINGS PART 2 MATERIALS 2.2 POLYVINYL CHLORIDE (PVC) PIPE AND FITTINGS A. PVC Pressure Pipe sizes 4 inch through 12 inch: ANSI/AWWA C 900 1. DR18 B. PVC Pressure Pipe sizes 14 inch
Development of the Urban Water and Sanitation Sector in South Sudan (DUWSS) Bill of Quantities. for LOCATED AT PRIMARY & SECONDARY SCHOOL.
Development of the Urban Water and Sanitation Sector in South Sudan (DUWSS) Bill of Quantities for SIX CHAMBER VIP LATRINE FACILITY LOCATED AT PRIMARY & SECONDARY SCHOOL YEI RIVER COUNTY South Sudan JUN,
SPECIFICATION for ISCO HDPE DUAL CONTAINMENT PIPE
SPECIFICATION for ISCO HDPE DUAL CONTAINMENT PIPE SECTION 15000 MECHANICAL 1. GENERAL 1.1 This specification shall govern the materials and installation of polyethylene dual contained system of pipe, structures
SECTION PIPE & PIPE FITTINGS PART 1 GENERAL
SECTION 02610 PIPE & PIPE FITTINGS PART 1 GENERAL 1.01 DESCRIPTION A. This Section includes the material and bedding requirements for all pipe and pipe fittings for underground pressure and non-pressure
Copper-Type K soft Drawn 40, 50 HDPE 100 and larger
1.0 GENERAL 1.1 Scope 1.1.1 The work covered by this section involves the installation of water and sewer service connections and all other associated work. 1.2 Authorization 1.2.1 Do not install service
SECTION 027 SPECIFICATIONS - PIPE MATERIALS FOR SEWERS
SECTION 027 SPECIFICATIONS - PIPE MATERIALS FOR SEWERS Pipe material used to construct, repair or modify sewers shall conform to the specifications within this Section. 1.0 Clay Pipe Construction of clay
THOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
WATER 6.1 GUIDELINES
6-1 6.0 WATER 6.1 GUIDELINES The requirements of the Queensland Water Resources Commission Guidelines for Planning and Design of Urban Water Supply Schemes shall be followed in general. The requirements
Water & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
SECTION UTILITY POLYETHYLENE CONTAINMENT PIPE SYSTEMS
SECTION 02670 UTILITY POLYETHYLENE CONTAINMENT PIPE SYSTEMS PART 1 - GENERAL 1.01 WORK INCLUDED A. Trenching and other excavation. B. Ground water control. C. Pipe bedding. D. Installation of containment
0.75 " transparent hose w/ valve for head measurements fixed to screws 20 MIL PVC liner. 6" gate valve
0.75 " transparent hose w/ valve for head measurements fixed to screws 250x1000 RC beam 6" gate valve Foundation preparation in accordance with technical specifications and as approved by engineer 25 cm
Model Specifications for Sclairpipe High Density Polyethylene (HDPE) Pipe
This publication is intended for use as a guide to support the designer of piping systems. The recipient is encouraged to independently verify all information and agrees that such information is not to
SECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS
SECTION 02620 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required to install High Density Polyethylene (HDPE) pressure pipe, fittings, and appurtenances
7. Allowable Fittings.
7. Allowable Fittings. a. General Requirements. 1) The fittings listed in this section are generally the allowable fittings for the design of DIP and PVC pipe. For steel pipe and fittings, see Part One,
CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 441 APRIL 2017 (Formerly OPSS 441, November 2014 Note: The PROV implemented in April 2017 replaces OPSS 441 COMMON, November 2014 with no technical
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION POLYETHYLENE PRESSURE PIPE
SUB WATER DEPARTMENT STANDARD CONSTRUCTION SPECIFICATIONS TABLE OF CONTENTS SECTION 33 11 13.24 POLYETHYLENE PRESSURE PIPE PART 1 GENERAL... 2 1.1 Description... 2 1.2 Reference Specification... 2 1.3
SECTION STORM DRAINAGE SYSTEM Excavating, Backfilling, and Compaction for Utilities Cast-in-place Concrete.
SECTION 02720 STORM DRAINAGE SYSTEM PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 02221 - Excavating, Backfilling, and Compaction for Utilities. 2. 03300 - Cast-in-place Concrete. 1.02 REFERENCES
CITY OF FARGO SPECIFICATIONS SEWER AND WATER SERVICE CONNECTIONS
SEWER AND WATER SERVICE CONNECTIONS PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of the furnishing of all labor, material,
SUMMARY OF PRICES FOR FOR FIRE FIGHTING WORKS FOR Phase-1,(Block-G&H) Type-B
SUMMARY OF PRICES FOR FOR FIRE FIGHTING WORKS FOR Phase-1,(Block-G&H) Type-B Design Centre Consulting Engineers Pvt Ltd, Ghaziabad, NCR Delhi, Tel-0120 4333451, 4333452 Page 1 BILL OF QUANTITIES S. NO.
THOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
Unit Rate. Subtotal in SDG. Site Clearing Preliminary Works. 1.0 Job. Excavation & Earth Works. Stone Masonry Works in foundation 100 M.
Bill of Quantities Nature of work : Construction of Health Center with 8 rooms (Clinics, Pharmacy, Labs, Fence & Latrines) Location: Shakreen- El Fasher Town- North Darfur State No. Description Qty Unit
REVISED PER ADDENDUM No. 1 - Unit Price Bid Schedule
1. Mobilization, Insurance, Bonds, General Requirements, BMPs, Record Drawings, Testing Requirements, Utility Location, Demobilization and Site Maintenance. 1 L.S. 2. Supply and install complete 384,238
***************************************************************************************************************
02720 STORM DRAINAGE SYSTEM *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 33 40 00. ***************************************************************************************************************
CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.MUNI 441 NOVEMBER 2016 CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT TABLE OF CONTENTS 441.01 SCOPE 441.02 REFERENCES 441.03 DEFINITIONS
CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 441 NOVEMBER 2010 CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT TABLE OF CONTENTS 441.01 SCOPE 441.02 REFERENCES 441.03 DEFINITIONS
July Bill No.1: Preliminaries
Bill No.1: Preliminaries 1 Mobilization 1.1 This item should include site office for the use of the Engineer's and Employer's staffs with the necessary facilities, furniture, computers, printers, photocopier,
SEWER FORCE MAIN HDPE PIPE
SECTION 15150 SEWER FORCE MAIN HDPE PIPE PART 1: GENERAL 1-1 DESCRIPTION: This specification governs the material, pipe, fittings, joining methods and general construction practice for High Density Polyethylene
DIVISION II TECHNICAL SPECIFICATIONS SECTION S-003 SANITARY SEWER FORCE MAIN SYSTEM
DIVISION II TECHNICAL SPECIFICATIONS SECTION S-003 SANITARY SEWER FORCE MAIN SYSTEM TABLE OF CONTENTS: I. DESCRIPTION:... 2 II. COORDINATION:... 2 III. CONSTRUCTION LAYOUT:... 3 IV. MATERIALS:... 3 V.
SECTION MEASUREMENT AND PAYMENT
SECTION 01026 PART 1 GENERAL 1.1 SECTION INCLUDES A. Explanation and Definitions B. Measurement C. Payment D. Schedule of Values E. Application for Payment 1.2 EXPLANATION AND DEFINITIONS A. The following
Comparative Statement of Various Pipes for Gravity Sewers
Comparative Statement of Various Pipes for Gravity Sewers EVALUATION 1. 2. 3. Length Diameters Type of Joint 0.6m 2 to 2.5m 6 or 12m 6 m 6 or 12m 100 to 300mm for higher diameters it is not economical.
SECTION VI POTABLE WATER, RECYCLED WATER, AND SANITARY SEWER SYSTEM FACILITY CONSTRUCTION
SECTION VI POTABLE WATER, RECYCLED WATER, AND SANITARY SEWER SYSTEM FACILITY CONSTRUCTION SECTION VI POTABLE WATER, RECYCLED WATER, AND SANITARY SEWER SYSTEM FACILITY CONSTRUCTION A. CONSTRUCTION STEPS
Addendum No. 1 GORDON WATER MAIN REPLACEMENT PWP Bid No.: WA TMWA Capital Project No.: October 3, 2018
Addendum No. 1 GORDON WATER MAIN REPLACEMENT PWP Bid No.: WA-2019-004 TMWA Capital Project No.: 10-0001.053 October 3, 2018 The following information, clarifications, changes and modifications are by reference
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
APPENDIX C TECHNICAL SPECIFICATIONS HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS
PART 1 GENERAL 1.01 DESCRIPTION: C TECHNICAL SPECIFICATIONS HIGH DENSITY POLYETHYLENE (HDPE) PIPE AND FITTINGS Scope This section specifies high density polyethylene pipe (HDPE) and fittings for water
UNIVERSITY OF MISSOURI Hydronic Energy Distribution 2016 Q1
GENERAL: The scope of this document is to provide instruction for the installation and testing of chilled water piping installed for the University of Missouri. DESIGN GUIDELINES: 1. Materials 1.1. Pipe
HDPE Pipe Fittings PIPE & FITTING SYSTEMS
HDPE Pipe Fittings PIPE & FITTING SYSTEMS 1 The Plastics Experts. AGRU Pipe & Fitting Systems offer a complete range of high-quality pipes, fittings, valves and customized components made from polyethylene.
PERMANENT PAVEMENT REPAIR NO SCALE
SAWCUT EXISTING PAVEMENT 2" BITUMINOUS CONCRETE SURFACE COURSE, CLASS 2 (MIN) CLEAN EDGE PRIOR TO PAVING AND PAINT WITH LIQUID BITUMEN. INSTALL SEALANT OVER JOINT UPON COMPLETION 2" BITUMINOUS CONCRETE
CONSTRUCTION SPECIFICATION FOR SEWAGE FORCEMAIN INSTALLATION IN OPEN CUT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 412 NOVEMBER 2009 CONSTRUCTION SPECIFICATION FOR SEWAGE FORCEMAIN INSTALLATION IN OPEN CUT TABLE OF CONTENTS 412.01 SCOPE 412.02 REFERENCES 412.03
CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 441 NOVEMBER 2012 CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT TABLE OF CONTENTS 441.01 SCOPE 441.02 REFERENCES 441.03 DEFINITIONS
Public Water Supply District #2 of St. Charles County, Missouri
Public Water Supply District #2 of St. Charles County, Missouri POLICIES, PROCEDURES, AND REQUIREMENTS FOR CONNECTION AND INSPECTIONS OF: RESIDENTIAL WATER AND/OR SEWER SERVICE CONNECTIONS COMMERCIAL WATER
SITE SERVICES GUELPH TRANSIT OPERATIONS & MAINTENANCE SECTION WATSON ROAD FACILITY PAGE 1 OF 6 WATER RECLAMATION PROJECT JUNE 2013
WATSON ROAD FACILITY PAGE 1 OF 6 PART 1 GENERAL 1.1 Description The work covered by this Section includes all labour, materials, equipment, and supervision necessary to complete the site services as shown
East Wenatchee Water District Supplemental Provisions to the 2012 WSDOT/APWA Standard Specifications
East Wenatchee Water District Supplemental Provisions to the 2012 WSDOT/APWA Standard Specifications 1-01 DEFINITIONS and TERMS 1-01.3 Definitions This section is supplemented with the following Deleted
AGRULINE large diameter piping system THE DURABLE PE-PIPING SYSTEM FOR HIGH VOLUME FLOW
AGRULINE large diameter piping system THE DURABLE PE-PIPING SYSTEM FOR HIGH VOLUME FLOW EN The Plastics Experts. The AGRULINE product group offers a complete, high-quality product range of pipes, fittings,
Technical Manual PE PIPE SYSTEM MAINTENANCE GUIDE ISSUE 1.1
Technical Manual PE PIPE SYSTEM MAINTENANCE GUIDE ISSUE 1.1 Ref: TM001 28 June 2008 Disclaimer In formulating this manual PIPA has relied upon the advice of its members and, where appropriate, independent
SECTION MEASUREMENT AND PAYMENT
SECTION 012000 Applies only to Collier County Public Utilities Projects or Works and Utilities Portions of Collier County Transportation Projects, but not to Private Developments PART 1 GENERAL 1.1 SECTION
CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 701 NOVEMBER 2006 CONSTRUCTION SPECIFICATION FOR WATERMAIN INSTALLATION IN OPEN CUT TABLE OF CONTENTS 701.01 SCOPE 701.02 REFERENCES 701.03 DEFINITIONS
SECTION 18. AMERICAN General Index
SECTION 18 AMERICAN General Index General Index A Abbreviations Organizations...1-1 Standard, American...17-23 Abrasion Resistant Pipe...12-12 Accessories (See Joint Materials) American Flow Control Valves
STANDARD CONSTRUCTION DETAILS SANITARY SEWER REVISED MARCH 2018 DEPARTMENT OF ENGINEERING
STANDARD CONSTRUCTION DETAILS REVISED MARCH 2018 GENERAL NOTES EMBEDMENT DETAILS EMBEDMENT DETAILS TWO-WAY CLEANOUT - EXISTING LATERAL TWO-WAY CLEANOUT - NEW CONSTRUCTION TYPICAL SEWER HOUSE SERVICE CONNECTION
PART 2 SECTION 9 WATERLINES
PART 2 SECTION 9 WATERLINES 9-1 General - All pipe, pipeline installations and facilities related thereto, shall be as specified herein. All pipe installation shall be in accordance with the manufacturers
DIVISION 2 SITE WORK SECTION SYSTEM WATER LINES
DIVISION 2 SITE WORK SECTION 02667 SYSTEM WATER LINES PART 1 GENERAL 1.01 SUMMARY A. Section includes: 1. Pipe and fittings for water lines including, HDPE sludge mains. 2. Gate valves and appurtenances.
SECTION GRAVITY IRRIGATION PIPELINES RUBBER GASKETED REINFORCED CONCRETE PIPE (RGRCP)
SECTION 02513 GRAVITY IRRIGATION PIPELINES RUBBER GASKETED REINFORCED CONCRETE PIPE (RGRCP) PART 1 GENERAL 1.01 SECTION INCLUDES A. Irrigation pipeline, as herein specified, consists of installing pipe
HDPE PIPE SYSTEM ACE FLOWTECH CO., LTD. GLOBAL PIPING SOLUTIONS PROVIDER!
R ACE FLOWTECH CO., LTD HDPE PIPE SYSTEM R Ace Flowtech Co., Ltd, a subsidiary of JM Quan en Group Office address: No.2, 2-1601, Rongyuan Road, Huayuan Industrial Park, Tianjin Binhai Hi- Tech Area, Tianjin
CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 602 MARCH 1993 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER 602.01 SCOPE 602.02 REFERENCES 602.05 MATERIALS TABLE OF CONTENTS
ELEVATION (A - A) PLAN GATE W ELL JOB NO. SHEET NO. DATE MARCH 2015 OF. Gate Wel Dimensions - Inches
CL Gate Wel Opening East Jordan Iron Works, Inc. Manhole Cover No. 1040 (or approved equal) w/ bolted frame 01-APR-2015 15:29 = I:\MSV8i\Plotting\piblack.ptb V:\201001\\C\8x11_Howell_Det\wm_det01_8x11_wm01.dgn
Job Order Sewer Repair Services
Job Order Sewer Repair Services Bid Addendum No. 1 October 10, 2018 All Contractual Requirements as defined within the Contract Documents shall remain in full force to the extent that they are not modified
Installation Overview
Installation Overview Access Cover & Frame See page 6 for detail Cover Supports Hardwood, Concrete or Galvanised Angle 225mm PVC Push On Cap Code: 750191 Shroud Code: 750138 225mm PVC Extension Pipe Cut
Water and Wastewater Frequently Asked Questions
Page 1 of 7 Water and Wastewater Frequently Asked Questions Any technical information contained herein is provided for convenience only, without any warranty or guarantee of any kind, either express or
en LARGE DIAmEtER PIPING system up to Ø2250 mm
LARGE DIameter PipING system up to Ø2250 mm en Worldwide competence in plastics AGRU Kunststofftechnik GmbH is a family-owned enterprise headquartered in Austria with worldwide activities in production
The Weak Links in the Wastewater Collection System: Manholes and Access Devices. Antonio V Almeida, PE CMOM 2014 Austin Texas August 19, 2014
The Weak Links in the Wastewater Collection System: Manholes and Access Devices Antonio V Almeida, PE CMOM 2014 Austin Texas August 19, 2014 Agenda Manhole Design The Manhole Paradigm past, present & future
PUBLIC WORKS SKAGIT COUNTY SAMISH ISLAND ROAD SAMISH ISLAND ROAD SLIDE REPAIR
EASEMENT NOTES:. EASEMENT LIMIT SHOWN AS PROVIDED BY. TESC NOTES:. CONTRACTOR SHALL DEVELOP TEMPORARY EROSION AND SEDIMENT CONTROL PLAN AND PROVIDE ONSITE CERTIFIED EROSION AND SEDIMENT CONTROL LEAD (CESCL)
1.1 SECTION INCLUDES.1 Materials and installation for water mains, hydrants, valves, valve boxes, and valve chambers, including service connections.
Issued 2005/06/01 Section 02511 Water Mains Page 1 of 10 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Materials and installation for water mains, hydrants, valves, valve boxes, and valve chambers, including service
Date: 13/04/2015 1:14:38 PM
Date: 13/04/2015 1:14:38 PM Cad File No: J:\500-Cad-data\Standard_Drawings\Flow Systems\FSI-1000-FS_On-Lot Infrastructure Installation Set Out Details.dwg Date: 25/02/2015 11:18:14 AM Cad File No: J:\500-Cad-data\Standard_Drawings\Flow
Construction Specification for Watermain Installation in Open Cut
Engineering & Construction Services Division Standard Specifications for Sewers and Watermains TS 441 September 2017 Amendment to OPSS.MUNI 441 (Nov 2016) Construction Specification for Watermain Installation
HITT STREET UNIVERSITY PROJECT #: CP REFER TO CP PLANS FOR ELECTRICAL DUCTBANK IN HITT STREET INSTALL:
N 1133521.33 E 1689742.43 STA: 10+53.07 INSTALL: 2-10" 90 BENDS CONNECT TO MIDDLEBUSH HALL INTERIOR PLANT PLUMBING MIDDLEBUSH HALL HW1 HWS HWR 10+00 FREDRICK APARTMENTS FINE ARTS INSTALL 422 LF 10" HWS
SECTION NATURAL GAS DISTRIBUTION
SECTION 33 51 00 PART 1 - GENERAL 1.1 DESCRIPTION SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph
HDPE PIPE FOR GOLF COURSE USE
PART 1: MATERIALS 1-1 PIPE: Select the pipe resin that apply A. Pipe shall be manufactured from a PE 4710 resin listed with the Plastic Pipe Institute (PPI) as TR-4. The resin material will meet the specifications
This section includes materials and installation of ductile-iron pipe and fittings for potable and recycled water systems.
NORTH MARIN WATER DISTRICT STANDARD SPECIFICATIONS SECTION 15056 DUCTILE-IRON PIPE AND FITTINGS PART 1 GENERAL 1.01 DESCRIPTION This section includes materials and installation of ductile-iron pipe and
PVC. System Specifications TABLE 1 TABLE 2
TRICON PVC TABLE 1 Pipe Size Minimum Insulation Thickness PVC Jacket O.D. PVC Jacket Wall 2 1.81 6.14.070 3 1.25 6.14.070 4 1.75 8.16.080 6 1.69 10.20.100 8 1.69 12.24.120 10 1.65 14.32.140 12 1.47 16.00.160
***************************************************************************************************************
02732 SANITARY FORCE MAIN *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 33 34 00. ***************************************************************************************************************
ONE PIPE LENGTH MAX (REFER TO 1/4"/FT SLOPE (MIN) 5'-0" (MIN) OR 4" LATERAL NOTE #1) INCREASER RIGHT-OF-WAY/ 4"x6" REFER TO TYPICAL EXCAVATION,
VENT CAP (MUSHROOM TYPE) SOLID CAP EXIST GRADE MIN BUILDING REFER TO NOTE #4 MIN CONCRETE SIDEWALK CURB OR EDGE OF SIDEWALK STREET CLEANOUT (REFER TO NOTE #3) VENT PIPE 4" PVC 6" PVC CLEANOUT CONCRETE
TECHNICAL SPECIFICATIONS GRAVITY AND PRESSURE SEWER LINE AND MATERIALS
TECHNICAL SPECIFICATIONS GRAVITY AND PRESSURE SEWER LINE AND MATERIALS Scope of Work Work performed under this contract shall consist of furnishing and installing, complete and ready for service, the sewer
SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL
SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL This section covers the furnishing and installation of ductile iron water pipe, fittings, thrust restraint and pipe disinfection. Ductile Iron Pipe MATERIALS
SECTION DUCTILE IRON FITTINGS. A. This section includes materials, installation, and testing of ductile iron fittings 48 inches and smaller.
PART 1 - GENERAL 1.1 DESCRIPTION A. This section includes materials, installation, and testing of ductile iron fittings 48 inches and smaller. 1.2 RELATED WORK SPECIFIED ELSEWHERE A. Section 01300 Record
EXTERNAL WORKS EXCAVATION,BACKFILLING & SITE WORKS
BILLS OF QUANTITIES - Name of Project CONSULTANT: Name of Office DATE:APR. 2008 External Works EXTERNAL WORKS EXCAVATION,BACKFILLING & SITE WORKS page 1 BILLS OF QUANTITIES - Name of Project CONSULTANT:
WATER SUPPLY CODE SCHEDULE OF AMENDMENTS
SEQ Water Supply and Sewerage Design & Construction Code (SEQ WS&S D&C Code) WATER SUPPLY CODE SCHEDULE OF AMENDMENTS Amendment No.2 December 2018 December 2018 SEQ WS&S D&C Code Water Supply Code - Amendment
AVK Couplings and Adaptors
AVK SAUDI VALVES AVK Couplings and Adaptors Solutions for All Applications 2 A Comprehensive Range of Couplings and Adaptors Product quality The complete coupling range is manufactured by AVK in accordance
ITEM NO SLIPLINING SANITARY SEWERS
ITEM NO. 1100 SLIPLINING SANITARY SEWERS 1100.1 DESCRIPTION: Sliplining is accomplished by pulling or pushing liner pipe into existing sewers by use of mechanical or hydraulic equipment. Once in place,
SECTION LAYING AND JOINTING BURIED PIPELINES
SECTION 02650 LINES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Installation of all underground pipelines. Provide pipeline materials, coatings and linings as specified and pipe of the types, sizes
SECTION POLYVINYL CHLORIDE (PVC) WATERLINE
SECTION 02632 POLYVINYL CHLORIDE (PVC) WATERLINE PART 1 - GENERAL 1.01 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required, and install polyvinyl chloride (PVC) waterline,