PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK
|
|
- Mitchell Howard
- 5 years ago
- Views:
Transcription
1 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH BILL No. 1 PIPE FITTINGS ITEM DESCRIPTION UNIT QTY RATE AMOUNT J1.0 CLASS J: PIPEWORK: FITTINGS, VALVES AND MASTER METERS NOTE: ALL FITTING SHAL BE AS PER KENYA Supply and transport to site, offload and store as directed by the employer HDPE PN12.5 Fittings as specified: J1.1 Bends as specified J1.1 Nominal bore 225mm 90 o bend 4 J1.2 Ditto but 22½⁰ bend Nr. 2 J1.3 Nominal bore 160mm 90 o bend Nr. 2 J1.4 Nominal bore 100mm 90 o bend Nr. 1 J2.0 Junctions and Branches as specified Supply and transport to site, offload and store as directed by the employer HDPE PN12.5 Saddle clamps and Flange G.I tee as J2.1 ND225mm x ND110mm G.I Flanged tee Nr. 2 J2.2 ND160mm x ND90mm G.I Flanged tee Nr. 1 J2.3 ND225mm x ND63mm HDPE Saddle Clamp PN 12.5 Nr. 4 J2.4 ND225mm x ND32mm HDPE Saddle Clamp PN 12.5 Nr. 3
2 BILL No. 1 PIPE FITTINGS ITEM DESCRIPTION UNIT QTY RATE AMOUNT J2.5 ND110mm x ND90mm HDPE Saddle Clamp PN 12.5 Nr. 2 J2.6 ND110mm x ND63mm HDPE Saddle Clamp PN 12.5 Nr. 20 J2.6 ND110mm x ND50mm HDPE Saddle Clamp PN 12.5 Nr. 20 J2.7 ND110mm x ND32mm HDPE Saddle Clamp PN 12.5 Nr. 15 PAGE TOTAL CARRIED FORWARD TO SECTION COLLECTION SHEET
3 BILL No. 1 PIPE FITTINGS ITEM DESCRIPTION UNIT QTY RATE AMOUNT J2.8 ND110mm x ND25mm HDPE Saddle Clamp PN 12.5 Nr J2.9 ND63mm x ND50mm HDPE Saddle Clamp PN 12.5 Nr J2.10 ND63mm x ND32mm HDPE Saddle Clamp PN 12.5 Nr J2.11 ND63mm x ND25mm HDPE Saddle Clamp PN 12.5 Nr J2.11 ND63mm x ND20mm HDPE Saddle Clamp PN 12.5 Nr J2.12 ND50mm x ND20mm HDPE Saddle Clamp PN 12.5 Nr J2.13 ND50mm x ND25mm HDPE Saddle Clamp PN 12.5 Nr J2.14 ND32mm x ND20mm HDPE Saddle Clamp PN 12.5 Nr Couplings J3.0 Supply and transport to site, offload and store as directed by the employer HDPE PN12.5 Couplings as specified: HDPE Fittings As per ISO 4427, metric series Standards J3.1 ND110mm HDPE Coupling PN 12.5 Nr. 10 J3.2 ND90mm HDPE Coupling PN 12.5 Nr. 10 J3.3 ND63mm HDPE Coupling PN 12.5 Nr. 15 J3.4 ND50mm HDPE Coupling PN 12.5 Nr. 20 J3.5 ND32mm HDPE Coupling PN 12.5 Nr. 30 J3.6 ND20mm HDPE Coupling PN 12.5 Nr J3.7 Coupling reducer 90mm x 63mm dia PN16 HDPE to EN Standard Nr. 1 J3.8 Coupling reducer 110mm x 90mm dia PN16 HDPE to EN Standard Nr. 2 J4.0 Stub Flange
4 BILL No. 1 PIPE FITTINGS ITEM DESCRIPTION UNIT QTY RATE AMOUNT J4.1 ND225mm HDPE Stub Flange PN 12.5 Nr. 5 J4.2 ND160mm HDPE Stub Flange PN 12.5 Nr. 3 J4.3 ND110mm HDPE Stub Flange PN 12.5 Nr. 3 J3.4 ND90mm HDPE Stub Flange PN 12.5 Nr. 2 J4.5 ND63mm HDPE Stub Flange PN 12.5 Nr. 20 J4.6 ND50mm HDPE Stub Flange PN 12.5 Nr. 10 PAGE TOTAL CARRIED FORWARD TO SECTION COLLECTION SHEET
5 BILL No. 1 PIPE FITTINGS ITEM DESCRIPTION UNIT QTY RATE AMOUNT Valves J5.0 Supply and transport to site, offload and store as directed by the employer Flanged Sluice Valve as specified by WASPA guideline J5.1 ND 200 Nr 3 J5.2 ND160 Nr 1 J5.3 ND100 Nr 4 J5.4 ND 75 Nr 4 J5.5 ND 50 Nr 30 J5.6 ND 40 Nr 20 J6.0 Gate Valves J6.1 DN 25 Nr 60 J6.2 DN20 Nr 3000 J6.3 DN15 Nr 500 J7.0 G.I Union J7.1 DN25 Nr 500 J7.2 DN20 Nr 3000 J8.0 Tapers as specified J x 150 Nr 1 J x 110 J x 100 Nr 1 PAGE TOTAL CARRIED FORWARD TO SECTION COLLECTION SHEET
6 BILL No. 1 PIPE FITTINGS ITEM DESCRIPTION UNIT QTY RATE AMOUNT J9.0 Adaptors Supply and transport to site, offload and store as directed by the employer PN12.5 HDPE to EN Standard Male Adaptors as specified: Male adaptor J mm dia Nr. 20 J9.2 90mm dia Nr. 60 J9.3 63mm dia Nr. 100 J9.4 50mm dia Nr. 100 J9.3 32mm dia Nr. 260 J9.4 20mm dia Nr. 500 J9.5 15mm dia Nr J10.0 Supply and transport to site, offload and store as directed by the employer HDPE PN12.5 Air Valves as specified: Air Valves to PN 16 Pressure as specified J10.1 Nominal bore 50mm double orifice air valve Nr. 8 J10.2 Nominal bore 25mm single orifice air valve Nr. 4 PAGE TOTAL CARRIED FORWARD TO SECTION COLLECTION SHEET K CLASS K PIPEWORK CHAMBERS AND PIPEWORK ANCILLARIES Supply and transport to site, offload and store as directed by the employer Heavy Duty Composite manhole Coversas specified: K1.1 Diameter 600mm Nr. 5 8, K mm Square Nr. 45 7, PAGE TOTAL CARRIED FORWARD TO SECTION COLLECTION SHEET
7 BILL No. 1 PIPE FITTINGS ITEM DESCRIPTION UNIT QTY RATE AMOUNT Bill 2 Collection Sheet Page No. 1 of 5 Page No. 2 of 5 Page No. 3 of 5 Page No. 4 of 5 Page No. 5 of 5 BILL 2 TOTAL CARRIED FORWARD TO SUMMARY SHEET
8 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH BILL No. 2 NRW EQUIPMENTS AND OTHER ACCESSORRIES ITEM DESCRIPTION UNIT QUANTITY RATE AMOUNT CLASS A: GENERAL ITEMS Contractual Requirements Specified Requirements 1 TOOLS AND EQUIPMENTS 1.00 Pipe testing equipments 1.01 Supply and deliver pipe testing equipments as follows: 1.02 Pipe diameter Nr Pipe thickness and eveness Nr Digital Pressure measurement devices Nr ElectroMechanical Equipment Portable Single Channel Data Loggers for measuring flow. Logging interval 0.1 to 60 minutes, data memory approximately 11,250 including pocket display unit Nr Software Set, Connector and Cables for the Loggers, including Laptop Computer (minimum specification for Laptop: DELL or approved equivalent, Latitude D620, Intel Centrino Duo, 1.8GHz, 512 MB RAM, 80GB HDD, DVD ± RW Optical Drive, with 15.4'' Wide Screen WiFi / 56K Modem, Bluetooth, with Win XP Professional and Microsoft Office 2003 or latest version. Nr Multi Purpose pipe locating device, Locmatic or approved equivalent. Nr Amplified Stethophone with wireless headphone set, complete with feeler rod microphone and ground microphone, for the quick recognizing of faulty water pipes with the acoustic pre location method on every access point of the network. Nr 1
9 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH BILL No. 2 NRW EQUIPMENTS AND OTHER ACCESSORRIES ITEM DESCRIPTION UNIT QUANTITY RATE AMOUNT Electronic Portable Pressure Logger 0 20 bar with provision for programming for 1,2,5,10,30 seconds, 1,5,10,30 minutes and 1 and 2 hours, with data memory for downloading the collected results Nr GPS machines as directed by the employer Nr Smart phone as directed by the employer Nr Leak detection equipments (collerators) Nr Surveyor's Measuring Wheel Nr Talbot Under Pressure Tapping Machine Model No. 2 or approved equivalent for Iron, Steel and HDPE Pipes (½" 2") Nr Tapping Collars and Ancillary Equipment i.e. ferrules, ferrule inner plugs, ferrule plug insertion tool etc. Set Talbot under pressure tapping machine Taldex MK111, or approved equivalent for upvc pipes (½" 2" drilling bit) complete with 3, 4, 6, 8, 10, and 12 inches saddles Nr 2 PAGE TOTAL CARRIED FORWARD TO SECTION COLLECTION SHEET
10 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH BILL No. 2 NRW EQUIPMENTS AND OTHER ACCESSORRIES ITEM DESCRIPTION UNIT QUANTITY RATE AMOUNT Bill 1 Collection Sheet Page No. 1 of 1 BILL 1 TOTAL CARRIED FORWARD TO SUMMARY SHEET
11 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH BILL No. 3 BULK AND CONSUMER METERS 1.10 Meters Supply and transport to site, offload and store as directed by the employer cold velocity water meters single jet class R200 as specified by Technical WASPA guildlines 1.11 Note: Make a provision of KShs 1000 per meter payable to the employer for fixing of the DN20 and DN 15 meters Nr 4000 ND 200 Nr ND100 Nr ND 75 Nr ND 50 Nr ND 40 Nr ND25 Nr ND 20 Nr ND15 Nr Supply and transport to site, offload and store as directed by the employer electromagnetic cold water meters with memory slot and data transnmission software as specified by Technical WASPA guildlines 2.11 ND 75 Nr ND 50 Nr ND 40 Nr ND25 Nr ND 20 Nr 2
12 2.16 ND15 Nr 2 PAGE TOTAL CARRIED FORWARD TO COLLECTION SHEET Bill 1 Collection Sheet Page No. 1 of 1 BILL 1 TOTAL CARRIED FORWARD TO SUMMARY SHEET
13
14 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH Bill No. 4: METER TESTING BENCH 1 METER TESTING BENCH 1.1 Supply, install, commission and making the test bench fully operational a Meter Test Bench for testing and calibration of domestic water meters from DN 15 to DN 63mm and complying with ISO Specification 4064/3 Generally, but not limited, the Meter Test Bench shall have the following basic specification: Width 1.6m, length 4.2m, height max. 3m Nr Water meter installation in series with at least 9 meters tested at ago, length of each n.e.300mm. Meter Test Flow Range from 5l/hr to 2,000l/hr Direct reading flow meter featuring seven calibers (two weak flow calibers using a water column and 5 medium and strong A vacuum gauge showing depression to 1 10 bars A vacuum pump of venturi type. Quick and easy supports and connections to facilitate fixing and dismantling of meters,. Water retrieval tank including internal and external drainage system. Flow viewing slit PAGE TOTAL CARRIED FORWARD TO COLLECTION SHEET Bill 1 Collection Sheet Page No. 1 of 1 BILL 1 TOTAL CARRIED FORWARD TO SUMMARY SHEET
15 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH SUMMARY SHEET ITEM DESCRIPTION AMOUNT (KSHS) 1 Bill No. 1 Pipe Fittings 2 Bill No. 2 Non Revenue Water Tools and Equipments 3 Bill No. 3 Bulk and Consumer Meters 4 Bill No. 4 Meter Testing Bench SubTotal Add 10% Contingency Grand Total TOTAL COST TAKEN TO FORM OF TENDER
16 EMPLOYER: MATHIRA WATER & SANITATION COMPANY LTD PROJECT NAME: REHABILITATION OF KARATINA URBAN WATER SUPPLY NETWORK CONTRACTOR: CONTRACT No. MAWASCO/RFB/WBP/ /C2: SUPPLY OF PIPE FITTINGS, NON REVENUE WATER EQUIPMENT, COLD WATER METERS AND METER TESTING BENCH METHODOLY, WORK PLAN AND TIME SCHEDULE ACTIVITY SCHEDULE TIMELINES M1 M2 M3 M4 M5 M6 W1 W2 W3 W4 W5 W6 W7 W8 W9 W10W11W12W13W14W15 W16 W17 W18 W19 W20 W21 W22 W23 W24 STAFF SCHEDULE AND INPUTS TIME INPUTS (DAYS) W1 W2 W3 W4 W5 W6 W7 W8 W9 W10 W11 W12 W13 W14 W15 W16 W17 W18 W19 W20 W21 W22 W23 W24 FIELDOFFICETOTAL
A Provide for Contractor's Office, Store etc. Sum
BILL NO.1 - PRELIMINARIES AND GENERAL CONDITIONS A Provide for Contractor's Office, Store etc. Sum B C Provide for Insurance in accordance with the Conditions of the Contract. Allow for the provision of
More informationImprovements to the Distribution Pipe Lines in Zalengi, Central Darfur Please insert the currency Item Description
RETURNABLE BID SCHEDULE 4 BILL OF QUANTITIES Case No. SDPC/76613/WORKS/ITB056 Improvements to the Distribution Pipe Lines in Zalengi, Central Darfur Please insert the currency 1 General 1 Mobilization
More informationDUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS
DUCTILE IRON PIPES AND FITTINGS DETAILED PRODUCTS SPECIFICATIONS General All Materials shall be EN, ISO or equivalent standard and shall be supplied from approved manufacturers. According to the International
More informationUltimate Pipeline Systems POWER PLASTIC FACTORY LLC.
Ultimate Pipeline Systems POWER PLASTIC FACTORY LLC e-mail: powerbmm@emirates.net.ae www.powergroups.ae Disclaimer All information in this catalogue is correct to our best of knowledge at the time of preparation.
More informationTITLE: SLAUGHTER HOUSE SEPTIC TANK. ITEM No. D E S C R I P T I O N UNIT QTY
D DEMOLITION & SITE CLEARANCE D1 GENERAL CLEARANCE 6-D152 Open bush and thicket in and around ha 0.02 the ponds. Locally disposed. D2 REMOVAL OF TREES AND STUMPS 6-D212 Trees of girth: 150 mm - 500 mm
More informationHAWLE-range of products
HAWLE-pRODucTS All OvER ThE world since 1948 HAWLE-range of products HAWLE subsidiaries HAWLE partners Illustrations, technical data, dimensions and weights are subject to alteration without notice. Edition
More informationITEM No. D E S C R I P T I O N UNIT QTY. 5-E343.2 In class III material m³ 1,260 - Max. Depth: m For disposal
EARTHWORKS Excavation for foundations 5E343.2 In class III material m³ 1,260 Max. Depth: 0.50 1 m For disposal 5E334.2 In class III material m³ 720 Max. Depth: 1 2 m For disposal Filling Ancillaries 5E723.0
More informationBILL OF QUANTITY ENGINEERING & MANAGEMENT CONSULTING CENTRE. "Beit Hanoun Emergency Water Supply Project"
"Beit Hanoun Emergency Water Supply Project" " Rehabilitation and Construction of Beit Hanoun Water Network " BILL OF QUANTITY ENGINEERING & MANAGEMENT CONSULTING CENTRE Bill of Quantities PREAMBLE TO
More informationNairobi Funeral Home and Forensics BOREHOLE BILLS OF QUANTITIES
Nairobi Funeral Home and Forensics BOREHOLE BILLS OF QUANTITIES 26/10/2015 Item Description Qty Unit Supply, deliver, install, test and commission the following borehole equipment including all materials
More informationDorot Irrigation Meter
DIM-A Irrigation Meter Application The DIM meter is designed for agriculture control applications. The turbine is located at the top of the pipe. Major section of the pipe is free for water flow. Features
More informationUnit Rate. Subtotal in SDG. Site Clearing Preliminary Works. 1.0 Job. Excavation & Earth Works. Stone Masonry Works in foundation 100 M.
Bill of Quantities Nature of work : Construction of Health Center with 8 rooms (Clinics, Pharmacy, Labs, Fence & Latrines) Location: Shakreen- El Fasher Town- North Darfur State No. Description Qty Unit
More informationDISTRIBUTED BY EMPIRE INFRASTRUCTURE PTY LTD
DISTRIBUTED BY EMPIRE INFRASTRUCTURE PTY LTD Contents Introduction Applications Standards Quality Classification Product Range Jacking Pipes Relining Pipes Introduction The company The process We are proud
More informationDevelopment of the Urban Water and Sanitation Sector in South Sudan (DUWSS) Bill of Quantities. for LOCATED AT PRIMARY & SECONDARY SCHOOL.
Development of the Urban Water and Sanitation Sector in South Sudan (DUWSS) Bill of Quantities for SIX CHAMBER VIP LATRINE FACILITY LOCATED AT PRIMARY & SECONDARY SCHOOL YEI RIVER COUNTY South Sudan JUN,
More informationNairobi Funeral Home and Forensics INCINERATOR BILLS OF QUANTITIES
Nairobi Funeral Home and Forensics INCINERATOR BILLS OF QUANTITIES 26/10/2015 Item Description Qty Unit INCINERATOR INSTALLATION Supply, deliver, install, test and commission the following incinerator
More informationList of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION
List of products of harmonised standards Code 28: PIPES-TANKS AND ANCILLARIES NOT IN CONTACT WITH WATER INTENDED FOR HUMAN CONSUMPTION EN 295-1 Part 1: Requirements for pipes, fittings and joints Vitrified
More informationOPTIMISING WATER DISTRIBUTION AVK DISTRICT METERED AREAS SOLUTIONS 1
AVK DISTRICT METERED AREAS SOLUTIONS OPTIMISING WATER DISTRIBUTION AVK DISTRICT METERED AREAS SOLUTIONS 1 CONTENT: DISTRICT METERED AREAS (DMA)... 4 5 IMPORTANCE OF RELIABLE HIGH-QUALITY VALVES... 6 7
More informationDR MARK C WEBB. Managing Director. SSIS Sahara (Pty) Ltd. South Africa
DR MARK C WEBB Managing Director SSIS Sahara (Pty) Ltd South Africa LEAK DETECTION TECHNOLOGY PRECISE LEAK DETECTION TECHNOLOGY FOR ASSESSING THE CONDITION OF BULK WATER PIPELINES Outline 1. Pipeline Inspection
More informationTHOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
More informationVIKING JOHNSON EASIRANGE. Repair and Tapping Solutions
VIKING JOHNSON EASIRANGE Repair and Tapping Solutions EasiRange Repair and Tapping Solutions A C The Viking Johnson EasiRange has been developed to provide a comprehensive range of pipe repair and tapping
More informationPLASTIC FITTINGS Avenue Edmonton, AB Canada T6E 5Z7. Toll Free: Phone: (780) Fax: (780)
9333 45 Avenue Edmonton, AB Toll Free: 1-800-272-9693 Phone: (780) 436-1930 Fax: (780) 435-4849 info@can-con.com TABLE OF CONTENTS PLASTIC FITTINGS POLYETHYLENE PIPE...- 1 - SERVICE RISERS... - 3 - TRANSITION
More informationMoisture analyzers (moisture meters) FIZEPR-SW100
www.fizepr.ru Design Bureau FIZELEKTRONPRIBOR Moisture analyzers (moisture meters) FIZEPR-SW100 for liquid, paste-like and bulk materials including petroleum, fuel oil, sand, coal, ore, concrete mixture,
More informationITEM NO. 824 SERVICE SUPPLY LINES (WATER)
ITEM NO. 824 SERVICE SUPPLY LINES (WATER) 824.1 DESCRIPTION: This item shall consist of water service supply lines installation and adjustment installed in accordance with these specifications and as directed
More informationPluvia Product and Installation Guide
Pluvia Product and Installation Guide Valid from 1. April 2013 Siphonic System Elements Guide All Geberit Pluvia rainwater systems in the UK and Ireland are installed by fully trained Approved Installers,
More informationPONDICHERRY UNIVERSITY ENGINEERING WING SCHEDULE OF WORK
PONDICHERRY UNIVERSITY ENGINEERING WING SCHEDULE OF WORK Name of the work: Supply, erection and commissioning of 20HP submersible motor pump set at Pondicherry University, Karaikal campus S.No. Description
More informationSan Antonio Water System Standard Specifications for Construction ITEM NO. 824 SERVICE SUPPLY LINES (WATER)
San Antonio Water System Standard Specifications for Construction ITEM NO. 824 SERVICE SUPPLY LINES (WATER) 824.1 DESCRIPTION: This item shall consist of water service supply lines adjustment and installation
More informationSECTION WASTEWATER FORCE MAINS
SECTION 02732 WASTEWATER FORCE MAINS PART - GENERAL 1.01 GENERAL: A. This section includes the general requirements for design and installation of force main systems serving wastewater lift stations. B.
More informationMaster Meter Testing at Water Plants and Pump Stations. Jeff Cruickshank, PE
Master Meter Testing at Water Plants and Pump Stations Jeff Cruickshank, PE NC AWWA-WEA Spring Conference Asheville, NC April 11, 2015 Presentation Outline What types of meters are used at WTPs and pump
More informationDIVISION II TECHNICAL SPECIFICATIONS SECTION S-003 SANITARY SEWER FORCE MAIN SYSTEM
DIVISION II TECHNICAL SPECIFICATIONS SECTION S-003 SANITARY SEWER FORCE MAIN SYSTEM TABLE OF CONTENTS: I. DESCRIPTION:... 2 II. COORDINATION:... 2 III. CONSTRUCTION LAYOUT:... 3 IV. MATERIALS:... 3 V.
More information(52.9) Rev 1.0 November 2009 John Newton & Co. Ltd. NEWTON SYSTEM 500 TITAN-PRO WHITE - PUMPING SYSTEM FOR NEWTON SYSTEM 500 INSTALLATION MANUAL
Cl/SfB 993 (52.9) X Rev 1.0 November 2009 John Newton & Co. Ltd. NEWTON SYSTEM 500 TITAN-PRO WHITE - PUMPING SYSTEM FOR NEWTON SYSTEM 500 INSTALLATION MANUAL INTRODUCTION CONTENTS The Titan-Pro White Pumping
More informationDescription Unit Quantity Rate Kshs. Amount Kshs.
BILL No.1 40m3 MASONRY STORAGE TANK No. Description Unit Quantity Rate Kshs. Amount Kshs. 1 SETTING OUT AND EARTH WORKS 1.1 General site clearance and setting out 1.2 Excavate over site 200mm to remove
More informationEPIC B2134 J345 X721 1/2015
EPIC B2134 J345 X721 1/15 Ekoplastik System made from granulate of leading European producers unique 3 layer pipe reinforced with basalt fiber new materials of 4. generation PP-RCT high pressure and temperature
More informationElectrical Services Standard Specification Cable Tray Installation. May For ROYAL HOLLOWAY UNIVERSITY OF LONDON
Electrical Services Standard Specification 4.0 - Cable Tray Installation May 2010 For ROYAL HOLLOWAY UNIVERSITY OF LONDON Prepared For The Estates Division By: Hulley & Kirkwood Consulting Engineers Ltd
More informationSECTION WASTEWATER FORCE MAINS
SECTION 02732 WASTEWATER FORCE MAINS PART 1 GENERAL 1.01 GENERAL: A. This section includes the general requirements for design and installation of force main systems serving wastewater lift stations. B.
More informationWORLD S NO.1 DUCTILE IRON PRODUCTS
1 WORLD S NO.1 DUCTILE IRON PRODUCTS 2 3 TO GROW THROUGH LEARNING, TO EXPAND THROUGH INNOVATION FOR BETTER BUSINESS, GO WITH KXD KSP KSP-Xinxing DIP Co., Ltd. Min Sup Lim Chairman KSP is a global business
More informationCopper-Type K soft Drawn 40, 50 HDPE 100 and larger
1.0 GENERAL 1.1 Scope 1.1.1 The work covered by this section involves the installation of water and sewer service connections and all other associated work. 1.2 Authorization 1.2.1 Do not install service
More informationTECHNICAL RANGE. The Complete Pipe Fitting s Handbook
TECHNICAL RANGE The Complete Pipe Fitting s Handbook CONTENTS Compression Fittings Introduction Copper Tubing for Economy Making a Compression Joint Compression Fittings Gate Valves Stop Taps Capillary
More informationYW Wholesale Policy on the installation, repair and replacement of a Non-Household Water Meter 14/03/2017
YW Wholesale Policy on the installation, repair and replacement of a Non-Household Water Meter 14/03/2017 Classification (external) Contents Introduction... 4 Aim... 5 Exclusions from Market Codes... 5
More informationFlow Meter Calibration
fluid mechanics H4 A compact unit that compares and shows the accuracy, losses and use of fundamental flow meters Key Features Unique quick-change flow meter adaptors and pressure connections Four tube
More informationPOLSAFE. Gas Distribution System
POLSAFE Gas Distribution System PIPELIFE INTERNATIONAL Pipelife International GmbH is one of the world's leading suppliers of plastic piping systems. Plastic pipes and fittings are produced in 34 Pipelife
More informationAVK 26 AVK UK Water Mains to Meter Offer & Price List 2017
AVK 26 AVK UK Water Mains to Meter Offer & Price List 2017 Technical introduction AVK is a new patented range of composite push fittings combining the safety and strength of a traditional mechanical fitting
More informationU-BOLT MECHANICAL TEE (SADDLE-LET) Model 300U
U-BOLT MECHANICAL TEE (SADDLE-LET) U Pipe Material Carbon steel, Schedule 10, Schedule 40. For use with alternative materials and wall thicknesses please contact ARGCO. Maximum Working Pressure Up to 365
More informationPipe Joints. Requirements and Test Methods. VdS-Guidelines for water extinguishing systems. VdS en. VdS en : (01)
VdS-Guidelines for water extinguishing systems VdS 2100-6en Requirements and Test Methods Reproduction prohibited even for internal use VdS 2100-6en : 2004-01 (01) Publisher and Publishing house: VdS Schadenverhütung
More informationTHOMAS. Buffalo Saddles. Tap In Products PIPE PRODUCTS. Universal Live Tap In Saddles for All Rigid Pipe Materials.
THOMAS PIPE PRODUCTS Tap In Products Buffalo Saddles Universal Live Tap In Saddles for All Rigid Pipe Materials A1 TAP IN PRODUCTS KITWE VALLEY - Copper Belt Province - Zambia PROJECT Kitwe Valley Pivot
More information2 PIPELINE COMPONENTS
2 PIPEINE COMPONENTS PROCESS PNT COMPONENTS P 302 e.1 PIPEINE COMPONENTS Introduction QVF borosilicate glass 3.3 pipeline is widely used in the chemical, pharmaceutical and allied industries together with
More informationUNDP / PAPP OFFICE BUILDING RAMALLAH HVAC WORKS
UNDP / PAPP OFFICE BUILDING RAMALLAH WORKS Bill of Quantities July 2008 ENGINEERING UNIT Project: system The contractor shall, when pricing the rates of this bill take into consideration including and
More informationDONKIN GAS SERVICE SOLUTIONS
AVK INNOVATION, QUALITY, EXPERIENCE DONKIN GAS SERVICE SOLUTIONS AVK AND DONKIN A WINNING COMBINATION Hyde Factory Manufacturing Fittings and Gas Valves since 1847 AVK UK and the Donkin brand are a winning
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...
More informationØ mm. SYSTEM KAN-therm. High quality for reasonable price TECHNOLOGY OF SUCCESS ISO 9001
Ø 16 110 mm SYSTEM KAN-therm PP High quality for reasonable price TECHNOLOGY OF SUCCESS Contents 3 System KAN-therm PP The material... 94 Sanitary systems installation... 95 Pipes... 95 Thermal elongation...
More informationPART A : CPVC PIPES AND FITTNGS (EXTERNAL WATERSUPPLY):
PART A : CPVC PIPES AND FITTNGS (EXTERNAL WATERSUPPLY): 01 Providing and Fixing of CPVC pipes confirming to ASTM standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer
More informationProLine Pipes Brochure 2018
ProLine Pipes Brochure 2018 ProLine Pipes With ProLine pipes, EPS Group has introduced the latest high-tensile, high-impact upvc threaded pipes popularly known as column pipes for submersible pumps. ProLine
More informationCMT MANUAL 5.1 DOSING UNIT INSTALLATION AND CYCLE TIME
CMT MANUAL 5.1 DOSING UNIT INSTALLATION AND CYCLE TIME TABLE OF CONTENTS INDEMNITY... 3 DOCUMENT INFORMATION... 3 ACKNOWLEDGEMENTS... 3 5.1.1 CHANNEL DESCRIPTION... 4 5.1.1.1 INLINE... 4 5.1.1.2 BYPASS...
More informationSUM i) Carry out calibration of 100,000 litres day tank. ii) Pipes, valves and other fittings connection to fuel offloading SUM
31 st July 2017 TENDER FOR RELOCATION OF ONE GE FRAME 6 GAS TURBINE FROM EMBAKASI IN NAIROBI TO MUHORONI NEAR KISUMU: KGN-GT-012-2017 KenGen wishes to make the following clarification and changes through
More informationAnnex: CONTRACT NOTICE
CORRIGENDUM No: 1 to the Publication Ref: 2014TC16I5CB007-2015-1-124/LP-TD01 Subject: Reconstruction of medieval fortress Kale" (upper and middle town and part of down town) Location: Pirot, Pirot`s district,
More informationStandpipe Meters and Hydrant Flushing Unit STM-E, STM-N, STM-T, STW The mobile tapping points for taking water from hydrants
Standpipe Meters and Hydrant Flushing Unit STM-E, STM-N, STM-T, STW The mobile tapping points for taking water from hydrants Flow rate Q n 2.5... 25. Weatherproof: designed for the tough conditions outdoors.
More informationSECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE)
SECTION 02623 HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE) PART 1 - GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install high density
More informationAVK Couplings and Adaptors
AVK SAUDI VALVES AVK Couplings and Adaptors Solutions for All Applications 2 A Comprehensive Range of Couplings and Adaptors Product quality The complete coupling range is manufactured by AVK in accordance
More informationSUMMARY OF PRICES FOR FOR FIRE FIGHTING WORKS FOR Phase-1,(Block-G&H) Type-B
SUMMARY OF PRICES FOR FOR FIRE FIGHTING WORKS FOR Phase-1,(Block-G&H) Type-B Design Centre Consulting Engineers Pvt Ltd, Ghaziabad, NCR Delhi, Tel-0120 4333451, 4333452 Page 1 BILL OF QUANTITIES S. NO.
More informationEast Central College
SECTION 221116 - DOMESTIC WATER PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationCHAPTER 11: Microsprinklers
Pressurized Irrigation Techniques 11.1 CHAPTER 11: Microsprinklers INTRODUCTION Microsprinklers are low capacity water emitters, sprinkler in type, but smaller in size than the conventional sprinklers
More informationTECHNO GROUP TECHNO PLAST. TECHNO PLAST : Pipe Extrusion manufacturer. TECHNO FIT : Injection moulding manufacturer
TECHNO GROUP TECHNO PLAST : Pipe Extrusion manufacturer TECHNO FIT : Injection moulding manufacturer TECHNO ALIMCO : Blow Moulding manufacturer TECHNO COR : Corrugated Pipe manufacturer TECHNO THERM :
More informationAgrément Certificate 2011/393
Agrément Certificate 2011/393 Copyright Agrément South Africa, August 2011 Subject: Geberit Pluvia Syphonic Roof Drainage System The master copy of this document appears on the website: www.agrement.co.za
More informationWATER AND SEWAGE SYSTEMS
MORE THAN 30 YEARS OF EXPERIENCE INDUSTRY CATALOGUE WATER AND SEWAGE SYSTEMS WATER AND SEWAGE SYSTEMS INDUSTRY AND MINING TELECOMMUNICATI ONS AND POWER INDUSTRY INTERNAL INSTALLATION S SPORTS AND RECREATION
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
More informationWellmaster Installation Manual Edition 4
Wellmaster Installation Manual Edition 4 The Flexible Rising Main CONTENTS Please read this manual completely before attempting any installation. it is especially important to check Section 3 which lists
More informationK-FLEX SOLAR SYSTEM SOLAR SYSTEM
K-FLEX SOLAR SYSTEM SOLAR SYSTEM K-FLEX offers a line of products designed specifically for solar heating, renewable energy sources used to produce hot water using solar energy. The product range consists
More informationCentral Concrete Product Limited. Product Catalogue
January 2007 Concrete Pipes Reinforced Concrete Pipe Internal Wall Thickness Pipe Strengths Pipe Pipe Weight Diameter (mm) Length (kg) (mm) B Wall C Wall B Wall C Wall (mm) B Wall C Wall 300 50 n/a Class
More informationPRODUCT GUIDE 2019 EFFECTIVE MARCH 25, 2019
PRODUCT GUIDE 2019 EFFECTIVE MARCH 25, 2019 TABLE OF CONTENTS 3 BOX CULVERTS 5 OPSD 804.03 FLAT HEADWALL 6 OPSD 804.04 V TYPE HEADWALL 7 OPSD 804.05 HEADWALL GRATES 8 MAINTENANCE HOLES 15 CATCH BASINS
More informationANNEX 3 DETAILED PRICE SCHEDULE RELATED TO THE BILL OF QUANTITIES 1. GENERAL DESCRIPTION OF ITEMS PRICES TO BE FULLY INCLUSIVE...
ANNEX 3 DETAILED PRICE SCHEDULE RELATED TO THE BILL OF QUANTITIES 1. GENERAL... 3 2. DESCRIPTION OF ITEMS... 5 3. PRICES TO BE FULLY INCLUSIVE... 5 4. COVERAGE... 6 5. BIDDER TO PRICE EACH ITEM... 6 6.
More informationFLUIDISTOR GAS FLOWMETER GD 100 (EX)
FLUIDISTOR GAS FLOWMETER GD 100 (EX) for measuring of all technical and medical gases DN25 - DN400 Oscillating measuring principle, without moving parts Resistent to dirt, e.g. oil and rust residues in
More informationCHAPTER 7 - UTILITY SERVICES WATER SUPPLY AND RETICULATION
CHAPTER 7 - UTILITY SERVICES WATER SUPPLY AND RETICULATION Page 175 of 309 7.1 EXTRACTS FROM THE DISTRICT PLAN Refer Appendix 17 Subdivision and Development Standards Utility Services: Water Supply and
More informationMulti-level individual metering guide. Version 3: December 2013
Version 3: December 2013 Contents 1 Introduction 4 2 Approach to introducing individual metering 5 2.1 Stage 1: Preparing the building for individual metering 5 2.2 Stage 2: Requirement for individual
More informationAcoustic technology for internal live gas distribution pipeline inspection
GDN-17-08 Call for Innovation Acoustic technology for internal live gas distribution pipeline inspection Introduction The Energy Innovation Centre (EIC) works in partnership with the UK electricity and
More informationWater & Industrial Products Catalog
Water & Industrial Products Catalog www.smith-blair.com info@smith-blair.com Phone: 800..9705 or 870.77.527 After Hours Number: 90.277.998 Fax: 800.8.792 or 870.77.52 EMERGENCY PHONE 90.277.998 In the
More informationUtility Systems product overview
Utility Systems product overview Utility Systems WMD, Bulk WMD, Aquadata and ancillary products form the basis of a configurable smart water metering system and prepayment water metering system. The components
More informationFittings. Elbow Pipe. Specifications:
Elbow Pipe This type of fitting is widely used in piping systems to connect two straight sections of pipes of equal or different nominal diameter and with a curvature at a certain angle to change its direction;
More informationb) General instructions and documents to be submitted by an interested company:
REFERENCE: EOI/675/2015 Date: July 23, 2015 Dear Sir / Madam, United Nations Development Programme in Belarus (UNDP) invites companies to submit Expressions of Interest in participating in the subsequent
More information7. Allowable Fittings.
7. Allowable Fittings. a. General Requirements. 1) The fittings listed in this section are generally the allowable fittings for the design of DIP and PVC pipe. For steel pipe and fittings, see Part One,
More informationAddendum-1. Ref. Original clause Amended Clause
Following clauses of Bid Document for Infrastructure works for Integrated Industrial Township are amended 1 5 Article 19 Clause 19.2.1 Page 64 of 453 2 22 Form of price proposal. 3 31 Schedule-H Contract
More informationHydroelectricity Pipeline Services
2013 Hydroelectricity Pipeline Services Design Installation Rehabilitation Where Smart Solutions Flow Hydroelectricity Pipeline Services Harnessing the Power of Water RadiusPLUS have the skills and competency
More informationHDPE PIPE SYSTEM ACE FLOWTECH CO., LTD. GLOBAL PIPING SOLUTIONS PROVIDER!
R ACE FLOWTECH CO., LTD HDPE PIPE SYSTEM R Ace Flowtech Co., Ltd, a subsidiary of JM Quan en Group Office address: No.2, 2-1601, Rongyuan Road, Huayuan Industrial Park, Tianjin Binhai Hi- Tech Area, Tianjin
More informationSECTION 401 WATER PIPE AND FITTINGS 2.2 POLYVINYL CHLORIDE (PVC) PIPE AND FITTINGS
SECTION 401 PIPE AND FITTINGS PART 2 MATERIALS 2.2 POLYVINYL CHLORIDE (PVC) PIPE AND FITTINGS A. PVC Pressure Pipe sizes 4 inch through 12 inch: ANSI/AWWA C 900 1. DR18 B. PVC Pressure Pipe sizes 14 inch
More informationflow measurement Methods
fluid mechanics h10 Demonstrates the application of Bernoulli s equation and the typical methods of measuring the flow of an incompressible fluid Key Features Includes Venturi meter, orifice plate and
More informationSIROPLAST-K. Pipe system for civil engineering subsoil drainage inspection chambers and subsoil drainage pipes to DIN
HEGLER II/1 Pipe system for civil engineering subsoil drainage inspection chambers and subsoil drainage pipes to DIN 4262-1 : Pipe system consisting of inspection chambers and subsoil drainage pipes. Twin
More informationSection 12 Hydraulics.
Design Guidelines Section 12 Hydraulics. www.canterbury.ac.nz/learningresources Standards in the Design Guidelines Suite Design Standard Guidelines Index: 01 General 02 Architecture 03 Audio Visual 04
More informationRUNYI GROUP. Main Features. STLU Vortex Flow Meter
STLU Vortex Flow Meter Main Features STLU Intelligent Vortex Flow Transducer is piezocrystal built in bluff body to avoid fluid turbulence caused by external type, no zero drift, and high reliability.
More informationADDENDUM NO. 2 TO THE TENDER DOCUMENTS FOR THE CORPORATION OF THE CITY OF PENTICTON 2015 Capital Works 2015-Tender-02
ADDENDUM NO. 2 TO THE TENDER DOCUMENTS FOR THE CORPORATION OF THE CITY OF PENTICTON April 28, 2015 To All Tenderers: This Addendum is issued prior to the Tender Closing Date April 30, 2015, in accordance
More informationOTCO 12/11/13 Water Audits Meter Testing & Leaks
OTCO 12/11/13 Water Audits Meter Testing & Leaks Aaron M. Horbovetz PMP, EIT Project Engineer What is a Water Audit? It s like a Scouting before you hunt. Why is an Audit Important? It tells you where
More informationCOMPLETE REVISION October Process Industry Practices Piping. PIP PNSC0036 High Density Polyethylene (HDPE) Piping Installation Specification
Piping High Density Polyethylene (HDPE) Piping Installation Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has
More informationBill of Quantity (BOQ)
Bill of Quantity (BOQ) PART-I : FIRE FIGHTING SYSTEM. Sr No Description Qty Unit Rate/Unit Amount 1 Dismantling, loading, shifting and unloading of following Fire Fighting Equipments from Berth No.8 to
More informationADDENDUM NO. 1 TO THE TENDER DOCUMENTS FOR THE CORPORATION OF THE CITY OF PENTICTON 2015 Capital Works 2015-Tender-02
ADDENDUM NO. 1 TO THE TENDER DOCUMENTS FOR THE CORPORATION OF THE CITY OF PENTICTON April 23, 2015 To All Tenderers: This Addendum is issued prior to the Tender Closing Date April 30, 2015, in accordance
More informationViking Johnson Couplers and Flange Adaptors
Viking Johnson Couplers and Flange Adaptors Scan for more information Technical Guide W5.1 Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology.
More informationCHINO VALLEY FIRE DISTRICT FIRE PROTECTION STANDARD
CHINO VALLEY FIRE DISTRICT FIRE PROTECTION STANDARD SPECIFICATIONS Establishing Minimum Standards for as Related To Fire Protection STANDARD # 103 REVISED 04/01/19 PAGES 7 SCOPE: These specifications shall
More informationGULF TECHNICAL FACTORY
1/6/2019 ' ~ \ bulflek GULF TECHNICAL FACTORY (GulfTek) was established in 2013 with an aim to support Aramco IKTVA initiative, by experienced & qualified engineers. GulfTek has two world class facilities,
More informationAPPLICABILITY TABLE. Council BSC CHRC GRC IRC LSC MRC RRC Applicable Yes Yes Yes Yes Yes Yes Yes
Precast roof slabs refer Standard Drawing CMDG-D-03 Special cast iron cover and frame, refer Service Authority. Special cast iron cover and frame, refer Service Authority. Cast iron cover and frame Ø 200
More informations t o c k g u i d e A generic stock list of products reported to be regularly available ex stock
stainless steel s t o c k g u i d e A generic stock list of products reported to be regularly available ex stock Essential information for anyone designing in stainless steel. Edition 4 January 2009 h
More informationSpecification texts FRIAFIT sewage system
Specification texts FRIAFIT sewage system Norm Conformity The FRIAFIT sewage system of PE 100 complies with EN 12666 and hence is deemed a regulated construction product. It therefore does not need general
More informationPART 1 COMMON FOR WATER & WASTEWATER CONSTRUCTION TITLE By Other Than Open Cut (Non-T.x.D.O.T. - Non Railroad) --- 101 Highway Crossing - All Wastewater Mains & Water Mains 12" and Smaller in Diameter.
More informationBONDSTRAND Glassfiber Reinforced Epoxy Piping Systems for Offshore Applications
BONDSTRAND Glassfiber Reinforced Epoxy Piping Systems for Offshore Applications Bondstrand Glassfiber Reinforced Epoxy Piping Systems Historically, offshore production platform, drilling rig and FPSO owners
More informationREPUBLIC OF KENYA MINISTRY OF HEALTH
REPUBLIC OF KENYA MINISTRY OF HEALTH EAST AFRICA S CENTERS OF EXCELLENCE FOR SKILLS AND TERTIARY EDUCATION IN BIOMEDICAL SCIENCES PROPOSED CONSTRUCTION OF EAST AFRICA S KIDNEY INSTITUTE COMPLEX AT KENYATTA
More informationTrenchless rehabilitation of water mains using the Primus Line system
Andreas Gross M.Sc., Head of International Business Development andreas.gross@primusline.com +49-9971-4003-240 Trenchless rehabilitation of water mains using the Primus Line system Company Introduction
More information