Facade Facade claddings Natural stone slab. Designing facades Insulating facades. With natural stone slabs

Transcription

1 Facade Facade claddings Natural stone slab Designing facades Insulating facades With natural stone slabs

2 Our natural stone slabs Limestone, mined and processed in our own quarries in Germany It should be noted that the details, illustrations, general technical information, and drawings contained in this brochure are only general proposals and details which describe the functions. They are not dimensionally accurate. The applicator/customer is independently responsible for determining the suitability and completeness for the product in question. Neighbouring works are described only schematically. All specifications and information must be adjusted or agreed in the light of local conditions and do not constitute work, detail, or installation plans. The technical specifications and product information in the Technical Data Sheets and in system descriptions/certificates must be observed.

3 Range Our subsidiary VeroStone GmbH mines the historic Kirchheim shell limestone (Sto-Fossil SKL and SBL) and Jura limestone (Sto-Fossil Bavaria Yellow, Travertin, and Greyblue) from its own quarries. The stone is then processed into 10-mm-thick natural stone slabs with different surfaces. They are available in S2, M2, and L2 formats. Sto-Fossil SKL (NSF004) Sto-Fossil SBL (NSF005) Sto-Fossil Bavaria Yellow (NSF001) Sto-Fossil Bavaria Travertin (NSF002) Sto-Fossil Bavaria Greyblue (NSF003) Facts about our natural stones: Five limestones with various surfaces Slab thickness: 10 mm Formats: S2, M2, L2 (see page 6) Different types of stone, formats, and surfaces can be combined with one another. All five limestones are suitable for application on EWIS. finely honed (C 320) finely honed (C 320) finely honed (C 320) finely honed (C 320) finely honed (C 320) Scale of the samples shown: edge length approx. 15 cm coarsely honed (C 60) coarsely honed (C 60) coarsely honed (C 60) coarsely honed (C 60) coarsely honed (C 60) sand-blasted sand-blasted sand-blasted 4 Range Range 5

4 Modular stone formats The natural stone slabs are available in three formats and can be combined with one another however you choose. Modular formats allow you to realise a huge range of facade designs even in a short period of time and at reduced costs. 524 S2 M2 L2 L2 M2 S Dimensions in mm 6 Formats

5 Surfaces and bonds The diverse range of stones, surfaces, and formats offers numerous design possibilities. There are various sequences and bonds available, including the parquet bond, combining light and dark, smooth and rough stones. Not forgetting the closed joints, which can be turned into an additional design element with the colour shade of the joining mortar. Stretcher bond, format L2 Sequence, formats S2, M2, L2 Stretcher bond, formats S2, M2, L2 8 Application

6 Patterns and joints ¼ offset stretcher bond Format: S2 Stone: Sto-Fossil Bavaria Travertin Surface finishing: C60 (coarsely honed) ½ offset stretcher bond Formats: S2, M2, L2 Stone: Sto-Fossil SKL Surface finishing: C320 (finely honed) ¼ offset stretcher bond Format: M2 Stone: Sto-Fossil SKL Surface finishing: sand-blasted Parquet bond Formats: S2, M2, L2 Stone: Sto-Fossil Bavaria Travertin Surface finishing: C60 (coarsely honed) ¼ offset stretcher bond Format: L2 Stone: Sto-Fossil Bavaria Travertin Surface finishing: C60 (coarsely honed) Sequence Formats: S2, M2, L2 Stone: Sto-Fossil SKL Surface finishing: C320 (finely honed) 10 Application XXXXXXXX Application 11

7 Reliability Adhesive Insulation Base coat Reinforcing coat with glass fibre mesh Fixing Mineral levelling coat, if required (not shown) Adhesive Pointing mortar Natural stone slab Joint sealant in accordance with the Technical Data Sheet with Sto-Backing Strip for Ceramics, execution in accordance with IVD data sheet Sto-Joint Sealing Tape in accordance with Technical Data Sheet Old render Adhesive Insulate the reveal with 4 cm of board thickness Reinforced base coat Sto-Glass Fibre Mesh G StoColl KM Insulation board StoColl FM-S Sto-Mesh Angle Bead Bond the covering/cladding using the floating-buttering method. System build-up Construction detail Connection of the reveal to a pre-placed window with joint sealant Tested systems Extensive planning data Personal consultation Videos on EWIS installation with facade claddings Reaction to fire: StoTherm Vario (insulant: polystyrene): B-s1, d0 in accordance with EN StoTherm Mineral (insulant: mineral wool): A2-s1, d0 in accordance with EN German technical approval: Z Ageing tests using hygrothermal weathering have been carried out on all system configurations offered Practical experience gained since 1994 All system components, including the stone from our own quarries, are subject to constant quality control Constant monitoring The following information is available online: Construction details for all standard solutions Patterns for various bonds Tileable image data for the stones Our team of advisors comprising project managers, sales advisors, and technical advisors will support you throughout all planning phases, including sampling, detailing, tendering, and applicator training. The team of advisors is in turn supported by the stone experts from our subsidiary VeroStone GmbH, and by the EWIS experts from our technical project service. 12 System System 13

8 New approach to EWIS Every year in Europe around 170 million square metres of facade surface are insulated with external wall insulation systems (EWIS). Render has established itself as the surface of choice. We can offer alternatives for your projects. 14 Facade claddings

9 Sweden Sto Scandinavia AB Box 1041 SE Linköping Street adress: Gesällgatan 6, SE Linköping Phone Fax Denmark Sto Danmark A/S Avedøreholmen 48 DK-2650 Hvidovre Phone Fax Finland Sto Finexter Oy Mestarintie 9 FI Vantaa Phone Fax asiakaspalvelu@sto.com Norway Sto Norge AS Waldemar Thranes gate 98A NO-0175 Oslo Phone Fax info.no@sto.com Sto Scandinavia AB, Rev.nr. 01/