PROTEKTOR PROFILES FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS

Transcription

1 PROTEKTOR PROFILES FOR EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS

2 Page Page Page Page Table of contents By profile numbers

3 Connecting profile Mounting set includes connecting profiles Box-shaped starter Profiles a } Base profiles for thermal insulation systems, matched to various insulation thicknesses Connecting piece for base profiles. Mounting set consisting of levelling pieces ( mm), dowels and connecting pieces for base profiles. Aluminium Stainless steel * 01* 1* 0* clear Width Insulation (a) Piece Connecting profile 0 0 Mounting set Levelling pieces Connecting profile Dowel 0 0 * not a stock item, delivery time on request

4 Pre-cut corner piece Variable render profiles for thermal insulation systems Two-piece, variable aluminium render profile for insulation thicknesses from 0 to 00 mm. 0 Pre-cut corners to suit box-shaped base profiles made of aluminium for precise corner formation. approx. cm. Starting with an insulation thickness of 10 mm, corners are supplied with a full-length wall side for improved handling. Aluminium Corner piece * * * not a stock item, delivery time on request clear Width Insulation

5 Clip-on profiles 12/ / / Aluminium, stainless steel and PVC-profiles to clip on to the base profiles. 12/21/00 For mm plaster thickness. 121/210/01 For mm plaster thickness. 122/212/02 For 1/1 mm plaster thickness. Aluminium Stainless steel PVC Plaster thickness 1 1

6 Adjustable starter profile PVC base profile 0 0 Various insulation thicknesses in combination with PVC render profiles Mounting bracket in combination with For insulation thicknesses 0 1 mm 0 10 mm 10 mm 0 1 mm 0 1 mm PVC base profile Possible insulation thicknesses in combination with PVC render profiles , 0 Mounting bracket in combination with For insulation thicknesses 0 10 mm 0 10 mm 0 mm 0 10 mm 0 10 mm 00 0 PVC render profile without thermal bridge for recessed base, for insertion between façade and perimeter insulation. 12 PVC mounting bracket with adhesion gel as a mounting aid for the insulating boards. 1 PVC mounting bracket as a lower support for the insulating boards. PVC Stk/Karton 1 clear Width Insulation 0-0 Plaster thickness 1 Side length

7 1 1 2 a Base profiles for curved walls, plaster stops a 1 1 Base profiles for thermal insulation systems, matched to various insulation thicknesses. Pre-stamping makes it possible to use these profiles on curved walls. Procedure: Cut out punching in the wall side and bend the profile to follow the course of the wall. Observe the recommendations of the thermal insulation system supplier. 2 Aluminium stop profiles for thermal insulation systems, adapted to different insulation thicknesses. Aluminium Aluminium clear Width Insulation (a) * 1* 2* * clear Width Insulation (a) * not a stock item, delivery time on request

8 Profile combination forming horizontal sliding joints Mauerwerk Masonry Gleitlager Sliding joints Concrete Beton 11/ / Installation instructions: Place the fastening side of the bottom part profile on the upper edge of the insulation panel that runs parallel to the joint or sliding joint in the building at a given height and apply a light coat of adhesive. A polystyrene strip approx. mm thick with compression tape is then placed on the bottom part. Set the render profile on top of the polystyrene strip and fasten it to the subsurface. After laying in the insulation panels, hang the perforated clip-on profile. Ensure that the butt joints between profiles are to be arranged offset. The bottom parts and perforated clip-on profiles are designed for organic and mineral plaster applications. Aluminium Stainless steel Plaster thickness 1 1

9 Water drip profiles 011/ /21/ 1/2 Water drip profiles for the execution of a clean finish with insulating attic realisation or balcony underside. Aluminium Stainless steel PVC Plaster thickness 1

10 Movement joint/expansion joint profiles 1 21/ 2 / Movement joint profile made of stainless steel for thin-layer thermal insulation systems, mm plaster thickness. Movement absorption: +/ 1 mm 21/ ➃ Expansion joint profiles made of stainless steel for thermal insulation systems, mm plaster thickness, with alkali-resistant glass fibre mesh. For 2 mm joints. Movement absorption: +/ 2 mm 2/22 ➃ Without alkali-resistant glass fibre mesh. Note: Only for vertical use. Centre piece can only sustain limited coatings Stainless steel Joint width Plaster thickness Colour no. Mesh dimensions in m with elastic centre piece, colour no. = white hard PVC with soft PVC bridge, colour no. = white

11 Movement joint/expansion joint profiles 1 Movement joint profile made of PVC, suitable for surfaces and interior corners up to 0. Movement absorption: +/ 1 mm 0/0 Expansion joint profiles with soft PVC centre piece for thermal insulation systems, with alkali-resistant glass fibre mesh. Movement absorption: +/- mm Note: Only for vertical use. Centre piece can only sustain limited coatings. PVC Plaster thickness 11

12 Mesh corner beads 0/1 // 0/0/0 b b a b a a 2 a b Variable angle positions 2 0/1 Mesh corner beads made of PVC, aluminium, stainless steel and polystyrene, equipped with fine glass 0/0/0 fibre mesh, for thermal insulation systems // 2 PVC mesh corner beads "on the roll" with alkali-resistant glass fibre mesh ( x mm). The "kink fold" allows the formation of corner angles from sharp to blunt (e.g. 1 etc.). The roll length of 0 meters allows joint-free corner formation (e.g. on house corners). Even windows of different sizes can be formed without cutting the profile. Aluminium Stainless steel PVC Polystyrene Mesh dimensions a b Rolle á 0 m 1 Rolle

13 1/2/ a b a b a 1, b Mesh corner beads and corner profiles 1/2/ Mesh corner angles made of sturdy armoured fibre, can also be used for interior corners. / ➁ ➂ Aluminium corner profile with alkali-resistant glass fibre mesh ( x mm) and PVC nose. For corner formation and reinforcing mineral finish thermal insulation systems. Aluminium white Plaster thickness Colour no. Mesh dimensions a b ➁ Coating: hard PVC, colour no. = white ➂ Base coat white 1

14 Support and connecting profiles 11/ , ø , 2, 2, 2, Aluminium connecting profiles for coupling mineral fibre panels in mechanically secured mineral finish thermal insulation systems. 1 Hard PVC connecting profiles for coupling polystyrene panels in mechanically secured thermal insulation systems. 11/0 Aluminium or hard PVC support profile for mechanically secured thermal insulation systems with mineral fibre panels or polystyrene panels. An mm Ø hole pattern is provided for fixation.fastening is performed with approved façade screw dowels. Base rails made of PVC. Aluminium PVC = 2. cm panel =0 cm panel 0, = 0 cm panel 1 carton = lengths/piece 0 pieces 0 pieces 2 lengths lengths 2 lengths 0 pieces 1

15 22 Plaster stop for roof ventilation Aluminium plaster stop for roof ventilation. For mounting onto the insulation. Vent cross-section: cm 2 /running metre. Aluminium white 22 Overhang 1 Base coat white 1

16 Metal sheet connecting profile , PVC metal sheet connecting profile with alkali-resistant glass fibre mesh designed especially for fast, technically perfect formation of a connection to sheet metal flashings in thermal insulation systems. 1 PVC edge profile with alkali-resistant glass fibre mesh designed as a cover for cutting edges for cimentbased outdoor panels, e.g. in lintel and base areas. PVC 1 2 Plaster thickness 1

17 Plaster stop profiles //1 PVC plaster stop profiles with alkali-resistant glass fibre mesh for different plaster thicknesses, for renovation and thermal insulation systems PVC Plaster thickness 1

18 Soffit connecting profiles Self-adhesive PVC profile with sealing lip and alkali-resistant glass fibre mesh ( x mm) for producing exact soffit connections in thermal insulation systems. 2 Self-adhesive PVC profile with movement chamber, sealing lip and alkali-resistant glass fibre mesh ( x mm) for producing exact soffit connections in thermal insulation systems. Note: Minimum processing temperature for the soffit connecting profile is + C. Maximum processing length is cm because of potential linear expansion. Soffit connecting profiles must never abut! Do not use on metallic surfaces with a luminosity value <! PVC 21 2, 0 0 Colour no. 1

19 Competent partners Sales areas Northern region Phone + [0] Fax + [0] Southern region Phone + [0] Fax + [0] Distributin warehouses PROTEKTORWERK Florenz Maisch GmbH & Co. KG Viktoriastraße D-1 Gaggenau Phone + [0] Fax + [0] PROTEKTORWERK Division Roof drainage Zusestraße 1 D-22 Itzehoe/Holstein Phone + 21/ Fax + 21/ 0 0- PROTEKTORWERK Merowingerstr. 1 D-1 Kirchheim/bei München Phone + [0].1 0. Fax + [0] Distributin warehouses Willemsen GmbH Factory representatives Customer Service Centre West Konrad-Adenauer-Ring D-1 Duisburg-Neumühl Phone + [0] Fax + [0] PROTEKTORWERK Gewerbestraße 1 D-1 Hoppegarten Phone + [0] 2.. Fax + [0] PROTEKTORWERK Großpötzschau Nr. a D-0 Espenhain/OT Pötzschau Phone + [0]. 0. Fax + [0]. 0.2 Headquarters Production Site PROTEKTORWERK Florenz Maisch GmbH & Co. KG Viktoriastr. D-1 Gaggenau Phone + [0] Fax + [0]

20 PROTEKTORWERK Florenz Maisch GmbH & Co. KG P.O. Box, D- Gaggenau Viktoriastr., D-1 Gaggenau Phone + [0] Fax + [0] info@protektor.com, Version: 1 0/1 K 1