Finishing off smoothly just got easier

Transcription

1 Finishing off smoothly just got easier &

2 Product Information & Technical Data RHINOGLIDE 25kg RHINOGLIDE 10kg RHINOBED PRODUCT CODE BAR CODE TIME TO SET 1 hour 1 hour 2 hours TIME OF USE ONCE MIXED 1 hour 1 hour 2 hours TEMPERATURE FOR CORRECT USE 5 35ºC 5 35ºC 5 35ºC WATER/PLASTER RATIO 13 14l/25kg W/P= l/10kg W/P= l/25kg W/P= RECOMMENDED WATER PH SHELF LIFE 9 months 9 months 9 months Customer contact centre:

3 Product Benefits Finer product that requires 150 grit sandpaper Plastic lining in every bag Shelf life of 9 months Easy to mix and work with No lumps and reduced shrinkage Simple, clear, mixing and application diagrams and instructions on back of pack Gyproc RhinoGlide Gyproc RhinoGlide is designed as a filler for Gyproc plasterboard systems, but can also be used as an interior crack filler and for filling rough plaster surfaces prior to painting. A 25kg bag should be sufficient to finish approximately 42-50lm of jointing. A 10kg bag should be sufficient to finish approximately lm of jointing. Gyproc RhinoBed Gyproc RhinoBed is a quality setting adhesive for detailed finishing and fixing and joint filling of Gyproc RhinoCove. Gyproc RhinoBed can also be used in the Gyproc Drylining application.

4 Gyproc RhinoBed Application Instructions for Gyproc RhinoArt Cove or Gyproc RhinoArt Cornice 1 2 Apply to finger thickness to Gyproc RhinoArt Cove or Gyproc RhinoArt Cornice using a putty knife or trowel. Stick Gyproc RhinoArt Cove or Gyproc RhinoArt Cornice to surface. Gyproc RhinoGlide Application Instructions 1 Apply Gyproc RhinoTape over Gyproc RhinoBoard joints. 2 Apply Gyproc RhinoGlide on top of Gyproc RhinoTape using a wide taping knife. Allow to dry. 3 4 Remove excess Gyproc RhinoBed with putty knife. Wipe off Cove or Cornice with a damp sponge. 3 Apply second finishing coat using a 300mm trowel. Allow to dry. 4 Sand to a smooth finish using a 150 grit sandpaper. Application Instructions for Gyproc DryLining 1 For uneven background surfaces: Apply dabs of mixed plaster to background, 150mm in diameter. Dab spacing: dabs per m 2. 2 Press Gyproc RhinoBoard to the background. Dabs extent to 200mm at a thickness of 20mm. Use product within 90 minutes after mixing Don t apply when temperature is below freezing Ambient and background temperature should be between 5-35 C Surfaces to be clean of dust and oil residue before application For interior use only Not for human consumption Gyproc DryLining Coverage: 5kg/m 2 Gyproc RhinoArt Cove coverage: As per required application thickness for Gyproc RhinoArt Cove Store inside on a level surface, off the floor, in a dry place protected from the weather Shelf life: 9 months from date of manufacture Use mix within 1 hour after mixing Don t apply when temperature is below freezing Ambient and background temperature should be between 5-35 C Surfaces to be clean of dust and oil residue before application For interior use only Not for human consumption Plaster primer to be applied to gypsum plaster surfaces before application of paint. Please consult your paint manufacturing company for recommendations on plaster primers and paint Application of epoxy paint is not recommended Gyproc RhinoGlide is applied using the same tools and procedure as described in the Plasters Pocket Book or call Saint-Gobain Gyproc s Customer Care Centre Gyproc RhinoGlide coverage: 350 g/m 2 of total surface (wastage excluded) Store inside on a level surface, off the floor, in a dry place protected from the weather Shelf life: 9 months from date of manufacture

5 Leaders in innovative building solutions Saint-Gobain Gyproc will be revitalising and investing in the plasters and finishing market in South Africa for The first innovations are the new formulations for the well established brands Gyproc RhinoBed and Gyproc RhinoGlide. Highlighted by bright new packaging these products are now finer than ever before, create less dust, are easier to apply and allow a smooth finish with less effort. It s designed to make your customers jobs better.