POWER RAIL TM CATALOG PV Solar Roof and Structure Mounting System

Transcription

1 POWER RAIL TM TALOG PV Solar Roof and Structure Mounting System 2016 Preformed Line Products SL-ML P Printed in the USA IH

2

3 Table of Contents POWER RAIL TM Module Mounting System 3 POWER RAIL TM Extrusions P4 4 P6 6 P8 8 P14 10 D Series XD/UD 12 D Series LD/MD 13 POWER RAIL Mounting Attachments P4, P6 and P8 D Series Mounting Base Brackets 14 P14 "L" Foot 14 "L" Feet 15 Tilted "L" Feet 15 Easy Feet TM 16 Roof Rod Mount 16 Power Post TM Stanchions 17 Easy Power Post TM Stanchions 17 Offset Power Post TM Stanchions 18 Super Post Stanchions 18 Corrugated Roof Mounts 19 Easy Tile Hook 19 Power Rail TM Splice Plate Kits 20 Power Rail TM PV Flash 21 Low Profile Tilt Kits (One High Portrait Mounting) P6 Low-Profile Tilt Kits 22 P8 Low-Profile Tilt Kits 22 Two-Tier Tilt Kits (Two High Portrait Mounting) Two-Tier Tilt Kits 60 Cell 23 Two-Tier Tilt Kits 72 Cell 23 Module Clamps Pre-Assembled Module Clamps w/rad Hardware 24 Unassembled Module Clamps with RAD Hardware 25 Pre-Assembled Purlin Through Hole Clamps 26 Universal End Clamp 27 Pre-Assembled Module Clamps with WEEB Grounding 28 Power Rail TM Accessories Grounding Hardware 29 Turn Bolts 29 Power Post Flashing 30 Flat Roof Flashing 30 Wire Management Clips 31 1

4 2

5 Power RailTM Module Mounting System Power Rail Module Mounting System The PV module mounting system engineered to reduce installation costs and provide maximum strength for parallel-to-roof, tilt up or open structure mounting applications. The Power Rail mounting system is designed with the professional PV solar installer in mind. The top-clamping rails utilize a single tool with a revolutionary patented RADTM Fastener for faster bolt placement. The unique shape of the RAD provides an anti-rotation feature, locking the bolt in the proper orientation when installed. The high strength rigid rails also include an integral wiring channel for securing cables and providing a professional finish. The system includes a wide selection of mounting options designed for secure and water tight attachments to any roof style. Mounting Rail Options* P4/P6 P8 P14 Engineered to save cost on shorter span applications Engineered for longer span and heavier snow conditions Engineered for commercial applications with greater distances between supports XD/UD Engineered to save cost on commercial and shade structure applications LD/MD Engineered for long span commercial and shade structure applications *Reference Rail Span and Cantilever Charts located at Features High Strength Reliable Design Flexible Mounting Options Engineered rail profiles for maximum strength-to-weight ratio n L mounting feet multiple heights n Tilt Feet, 5 and 10 degrees n Structural Marine Grade Aluminum rail construction n Power Post solid Aluminum stanchions n High Strength stainless steel module clamps n Easy Feet attachment anywhere on metal or composite roof decking n PV Flashing hardware n Low Profile and Two-Tier Tilt Kits up to 45 degrees n Reduced Installation Time and Costs n Single Tool Assembly all 5/16" hardware n RADTM hardware for quick bolt placements that Lock-In-Place n Wiring Channel for securing cables n Standard lengths up to 27 feet eliminate costly rail splices AMP Clamp Integral module grounding (800) n 3

6 Power Rail TM Extrusions Power Rail Extrusions Power Rail is an engineered profile extrusion made from Series 6000 structural marine grade aluminum. Standard finish is mill-finish aluminum. and Anodized options available. P4 Power Rail P4 Extrusion 84" Standard Lengths Length 84" 2.67 per Quantities (Higher Volume P4-84 Mill P P P4-84 Mill P P P4-84 Mill P P P4-84 Mill P P P4-84 Mill P P P4-84 Mill P P " Standard Lengths Length 126" 4.00 per Quantities (Higher Volume P4-126 Mill P P P4-126 Mill P P P4-126 Mill P P P4-126 Mill P P P4-126 Mill P P P4-126 Mill P P " Standard Lengths Length 162" 5.15 per Quantities (Higher Volume P4-162 Mill P P P4-162 Mill P P P4-162 Mill P P P4-162 Mill P P P4-162 Mill P P P4-162 Mill P P Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized 4

7 Power Rail TM Extrusions Power Rail Extrusions P4 Power Rail P4 Extrusion 204" Standard Lengths Length 204" 6.48 per Quantities (Higher Volume 242" Standard Lengths Length 242" 7.60 per Quantities (Higher Volume 282" Standard Lengths Length 282" 8.95 per Quantities (Higher Volume 324" Standard Lengths Length 324" per Quantities (Higher Volume P4-204 Mill P4-242 Mill P4-282 Mill P4-324 Mill P P P P P P P P P4-204 Mill P4-242 Mill P4-282 Mill P4-324 Mill P P P P P P P P P4-204 Mill P4-242 Mill P4-282 Mill P4-324 Mill P P P P P P P P P4-204 Mill P4-242 Mill P4-282 Mill P4-324 Mill P P P P P P P P P4-204 Mill P4-242 Mill P4-282 Mill P4-324 Mill P P P P P P P P P4-204 Mill P4-242 Mill P4-282 Mill P4-324 Mill P P P P P P P P Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized 5

8 Power Rail TM Extrusions Power Rail Extrusions Power Rail is an engineered profile extrusion made from Series 6000 structural marine grade aluminum. Standard finish is mill-finish aluminum. and Anodized options available. P6 Power Rail P6 Extrusion 84" Standard Lengths Length 84" 5.0 per Quantities (Higher Volume 126" Standard Lengths Length 126" 7.5 per Quantities (Higher Volume 162" Standard Lengths Length 162" 9.5 per Quantities (Higher Volume P6-84 Mill P6-126 Mill P6-162 Mill P P P P P P P6-84 Mill P6-126 Mill P6-162 Mill P P P P P P P6-84 Mill P6-126 Mill P6-162 Mill P P P P P P P6-84 Mill P6-126 Mill P6-162 Mill P P P P P P P6-84 Mill P6-126 Mill P6-162 Mill P P P P P P P6-84 Mill P6-126 Mill P6-162 Mill P P P P P P Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized 6

9 Power Rail TM Extrusions Power Rail Extrusions P6 Power Rail P6 Extrusion 204" Standard Lengths Length 204" 12.0 per Quantities (Higher Volume 242" Standard Lengths Length 242" 14.0 per Quantities (Higher Volume 282" Standard Lengths Length 282" 16.5 per Quantities (Higher Volume 324" Standard Lengths Length 324" 19.0 per Quantities (Higher Volume P6-204 Mill P6-242 Mill P6-282 Mill P6-324 Mill P P P P P P P P P6-204 Mill P6-242 Mill P6-282 Mill P6-324 Mill P P P6-204 P P P6-204 P P P6-204 P P P6-204 P Mill Mill Mill Mill P P P6-242 P P P6-242 P P P6-242 P P P6-242 P Mill Mill Mill Mill P P P6-282 P P P6-282 P P P6-282 P P P6-282 P Mill Mill Mill Mill P P P6-324 P P P6-324 P P P6-324 P P P6-324 P Mill Mill Mill Mill P P P P Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized 7

10 Power Rail TM Extrusions Power Rail Extrusion Power Rail is an engineered profile extrusion made from Series 6000 structural marine grade aluminum. Standard finish is mill-finish aluminum. and Anodized options available. P8 Power Rail P8 Extrusion 84" Standard Lengths Length 84" 7.0 per Quantities (Higher Volume 126" Standard Lengths Length 126" 10.5 per Quantities (Higher Volume 162" Standard Lengths Length 162" 13.5 per Quantities (Higher Volume P8-84 Mill P8-126 Mill P8-162 Mill P P P P P P P8-84 Mill P8-126 Mill P8-162 Mill P P P P P P P8-84 Mill P8-126 Mill P8-162 Mill P P P8-84 Mill P P P8-84 Mill P P P8-84 Mill P P P P P8-126 Mill P P P8-126 Mill P P P8-126 Mill P P P P P8-162 Mill P P P8-162 Mill P P P8-162 Mill P P Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized 8

11 Power Rail TM Extrusions Power Rail Extrusion Power Rail P8 Extrusion P8 204" Standard Lengths Length 204" 17.0 per Quantities (Higher Volume 242" Standard Lengths Length 242" 20.2 per Quantities (Higher Volume 282" Standard Lengths Length 282" 23.5 per Quantities (Higher Volume 324" Standard Lengths Length 324" 27.0 per Quantities (Higher Volume P8-204 Mill P8-242 Mill P8-282 Mill P8-324 Mill P P P P P P P P P8-204 Mill P8-242 Mill P8-282 Mill P8-324 Mill P P P8-204 P P P8-204 P P P8-204 P P P8-204 P P Mill Mill Mill Mill P P P8-242 P P P8-242 P P P8-242 P P P8-242 P P Mill Mill Mill Mill P P P8-282 P P P8-282 P P P8-282 P P P8-282 P P Mill Mill Mill Mill P P P8-324 P P P8-324 P P P8-324 P P P8-324 P P Mill Mill Mill Mill Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized 9

12 Power Rail TM Extrusions Power Rail Extrusions Power Rail is an engineered profile extrusion made from Series 6000 structural marine grade aluminum. Standard finish is mill-finish aluminum. and Anodized options available. P14 Power Rail P14 Extrusion 84" Standard Lengths Length 84" 15.5 per Quantities (Higher Volume 126" Standard Lengths Length 126" 23.5 per Quantities (Higher Volume 162" Standard Lengths Length 162" 29.0 per Quantities (Higher Volume P14-84 Mill P Mill P Mill P P P P P P P14-84 Mill P Mill P Mill P P P P P P P14-84 Mill P Mill P Mill P P P P P P P14-84 Mill P Mill P Mill P P P P P P P14-84 Mill P Mill P Mill P P P P P P P14-84 Mill P Mill P Mill P P P P P P Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized Super Post TM Stanchions may be used with the P14 Power Rail refer to page

13 Power Rail TM Extrusions Power Rail Extrusions Power Rail P14 Extrusion P14 204" Standard Lengths Length 204" 38.0 per Quantities (Higher Volume 242" Standard Lengths Length 242" 44.5 per Quantities (Higher Volume 282" Standard Lengths Length 282" 52.0 per Quantities (Higher Volume 324" Standard Lengths Length 324" 60.0 per Quantities (Higher Volume P Mill P Mill P Mill P Mill P P P P P P P P P P P P P P P P P Mill Mill Mill Mill Mill P P P P P P P P P P P P P P P P P Mill Mill Mill Mill Mill Reference for Span/Cantilever Charts. Standard - Mill - Anodized - Anodized P P P P P P P P P P P P P P P P P Super Post TM Stanchions may be used with the P14 Power Rail refer to page 18. Mill Mill Mill Mill Mill P P P P P P P P P P P P P P P P P Mill Mill Mill Mill Mill

14 Power Rail TM D Series Power Rail Extrusions Power Rail is an engineered profile extrusion made from Series 6000 structural marine grade aluminum. Standard finish is mill-finish aluminum. and Anodized options available. XD Power Rail XD and UD Extrusions 242" Standard Lengths Length 242" " Standard Lengths Length 282" " Standard Lengths Length 324" 21.6 per Quantities (Higher Volume Quantity Price XD Quantity Price XD Quantity Price XD UD 242" Standard Lengths Length 242" " Standard Lengths Length 282" " Standard Lengths Length 324" 34.8 per Quantities (Higher Volume Quantity Price UD Quantity Price UD Quantity Price UD

15 Power Rail TM D Series Power Rail Extrusions Power Rail is an engineered profile extrusion made from Series 6000 structural marine grade aluminum. Standard finish is mill-finish aluminum. and Anodized options available. LD Power Rail LD and MD Extrusions 242" Standard Lengths Length 242" " Standard Lengths Length 282" " Standard Lengths Length 324" 46.1 per Quantities (Higher Volume Quantity Price LD Quantity Price LD Quantity Price LD MD 242" Standard Lengths Length 242" " Standard Lengths Length 282" " Standard Lengths Length 324" 59.1 per Quantities (Higher Volume Quantity Price MD Quantity Price MD Quantity Price MD

16 Power Rail TM Mounting Attachments P4, P6 and P8 D Series Mounting Base Brackets Mounting base brackets are fabricated from Series 6000 structural marine grade aluminum. 5/16" hardware included. MBB-LD-MD MBB-XD-UD MBBGC LD/MD Mounting Base Bracket XD/UD Mounting Base Bracket Grounding Washer for MBB-LD-MD Base Bracket Quantity Price Mounting Base Bracket with 5/16" Coated Hardware Grounding Washer P14 "L" Foot P14 "L" Feet are fabricated from high strength 1/4" Series 6000 marine grade aluminum. 1/2" hardware included. P14-LF Power Rail P14 L-Mounting Foot Quantity Price P14 L Style Foot w/1/2" Hardware 1/2" ance Hole 14

17 Power Rail TM Mounting Attachments P4, P6 and P8 "L" Feet "L" Feet are fabricated from high strength 3/16" aluminum and include a vertical slot for adjusting to irregular surfaces. 5/16" coated hardware included. FOR ORDERING Stainless Steel Finish: ADD (-SS suffix) LF2 LF3 LF5 LF6 PPB 2.5" Tall L-Mounting Foot 3.5" Tall L-Mounting Foot 5" Tall L-Mounting Foot 6" Tall L-Mounting Foot Power Post Bracket (lbs.) Quantity Price L Style Foot w/turn Bolt 3/8" ance Slot Power Post Bracket w/turn Bolt 3/8" ance Slot Tilted "L" Feet "L" Feet are fabricated from high strength 3/16" aluminum. Tilted "L" Feet provide a low cost solution to increase module tilt angles by 5 or 10. 5/16" coated hardware included (lbs.) Quantity Price FF5 5 Front Foot BF5 5 Back Foot FF10 10 Front Foot BF10 10 Back Foot /8" ance Slots 15

18 Power Rail TM Mounting Attachments P4, P6 and P8 Easy Feet Easy Feet mount directly over metal and composite shingles into roof decking and do not require attachment to a roof structural member. Sealing butyl mastic backing and PHEinox TM RSS screws are included. PEF-1.5 PEF-2.0 PEF-3.0 Pivot Easy Mounting Foot w/1.5" Screws Pivot Easy Mounting Foot w/2.0" Screws Pivot Easy Mounting Foot w/3.0" Screws PHEinox TM RSS screws are manufactured by GRK Fasteners. Quantity Price Butyl Mastic, Turn Bolt, Roof Screws and Neoprene Washers Included Roof Rod Mount Roof Rod mounts attach directly to the roof deck and are suitable for tile and other roofing materials. Simply, drill a hole through the roofing material. Sealing butyl mastic backing and PHEinox TM RSS screws included. Per Quantity Price RRM Threaded Rod Mount Maximum adjustment is 6 inches. Butyl Mastic, "L" Foot, Turn Bolt, Roof Screws and Neoprene Washers Included 16

19 Power Rail TM Mounting Attachments P4, P6 and P8 Power Post Stanchions Power Posts offer high strength solid aluminum construction and may be used with flashing cones or with built-up roofs. Diameter (lbs.) Quantity Price PP3 3" Power Post 1.31" PP4 4" Power Post 1.31" PP5 5" Power Post 1.31" PP6 6" Power Post 1.31" PP7 7" Power Post 1.31" /16" ance Holes 5/16" Hardware Easy Power Post Stanchions Easy Power Posts mount directly to the roof deck. Sealing butyl mastic backing and PHEinox TM RSS screws are included. Diameter (lbs.) Quantity Price EP3 3" Easy Post 1.31" EP4 4" Easy Post 1.31" EP5 5" Easy Post 1.31" EP6 6" Easy Post 1.31" EP7 7" Easy Post 1.31" Butyl Mastic, Roof Screws and Neoprene Washers Included 5/16" Hardware 17

20 Power Rail TM Mounting Attachments P4, P6 and P8 Offset Power Post Stanchions Offset Power Posts are made of high strength solid aluminum and center the flashing cone and avoid potential gaps with the Power Post base. Diameter OP3 OP4 OP5 OP6 OP7 3" Offset Mounting Post 4" Offset Mounting Post 5" Offset Mounting Post 6" Offset Mounting Post 7" Offset Mounting Post (lbs.) Quantity Price " " " " " /16" ance Holes 5/16" Hardware Super Post Stanchions* Super Posts offer high strength solid aluminum construction for larger arrays and higher roof clearance. Diameter SP7 SP8 SP9 SP10 7" Super Mounting Post 8" Super Mounting Post 9" Super Mounting Post 10" Super Mounting Post * May also be used with the P14 Rail. (lbs.) Quantity Price " " " " /2" Hardware 5/16" ance Holes 18

21 Power RailP6 TM Mounting and P8 Mounting Attachments Attachments P4, P6 and P8 Corrugated Roof Mounts The CMB offers high strength solid aluminum and provides a mounting bridge over the peak of a metal corrugated roof keeping the penetration above the water diverting valleys. Includes Butyl Mastic, L-Foot not included. Quantity Price CMB Mounting Bridge to Span Peaks of Corrugated Metal Roofs /8" ance Hole Includes Butyl Mastic, "L" Foot Ordered Separately Note: Not all corrugated metal roofs are the same. Please contact DPW Solar to design mounting bridges that are specific to your application. Provide "X" and "Y" Dimensions for your roof. subject to change. "L" Foot not included. Y X Easy Tile Hook The all stainless steel Easy Tile Hook attaches underneath concrete/clay tiles and sweeps out from underneath, allowing for a PV module installation without the need to penetrate tiles. Includes Butyl Mastic and PHEinox TM RSS screws. Quantity Price /8" ance Slot ETH Easy Tile Hook PHEinox TM RSS screws are manufactured by GRK Fasteners. 19

22 Power Rail TM Mounting Attachments P4, P6 and P8 Power Rail Splice Plate Kits The Power Rail Splice Kits are made from High Strength Aluminum. Includes hardware. Splice Plates P4-SPK P4-4HSPK P6-SPK P6-4HSPK P8-SPK P14-SPK Splice Plate for P4 Two Hole Splice Plate for P4 Four Hole Splice Plate for P6 Two Hole Splice Plate for P6 Four Hole Splice Plate for P8 Splice Plate for P14 (lbs.) Quantity Price P4/P6-2-Hole Splice Plates P4/P6/P8-4-Hole Splice Plates 5/16" Hardware Included XD-SPK UD-SPK LD-SPK MD-SPK Splice Plate Set for XD Splice Plate Set for UD Splice Plate Set for LD Splice Plate Set for MD P14 - Splice Plate (Each kit includes 2 splice plates with selftapping screws) XD, UD, LD, and MD Splice Plates 20

23 Power Rail TM Mounting Attachments P4, P6 and P8 Power Rail PV Flash Power Rail PV Flash includes one universal slotted compression block, and one 8" x 12" flashing in matte, black color. L-Foot ordered separately. PFU* PVU* Attachment Hardware 5/16" x 6" hangerbolt Stainless Steel Base Plate and 3" Fasteners Shipping (lbs.) Non- Discountable Price Qty PFU PVU *MUST order in quantities of

24 Power Rail TM Tilt Kits Low Profile Tilt Kits One High Portrait Mounting The all aluminum Low Profile Tilt Kits mount a set of Power Rail extrusions (sold separately) at the tilt angle specified. Tilt kits are designed for portrait module mounting and aid in increasing energy production. P6 Low-Profile Tilt Kits P6-OP15 P6-OP25 P6-OP35 P6-OP45 Low Profile P6 15 tilt kit Low Profile P6 25 tilt kit Low Profile P6 35 tilt kit Low Profile P6 45 tilt kit (lbs.) Quantity Price P6 Low-Profile Tilt Kit Includes Strong Back, Fixed Leg, Mounting Feet, Rail Brackets and Hardware. P6 Power Rail Extrusions ordered separately. P8 Low-Profile Tilt Kits P8-OP15 P8-OP25 P8-OP35 P8-OP45 Low Profile P8 15 tilt kit Low Profile P8 25 tilt kit Low Profile P8 35 tilt kit Low Profile P8 45 tilt kit (lbs.) Quantity Price P8 Low-Profile Tilt Kit Includes Strong Back, Fixed Leg, Mounting Feet, Rail Brackets and Hardware. P8 Power Rail Extrusions ordered separately. 22

25 Power Rail TM Tilt Kits Two-Tier Tilt Kits Two High Portrait Mounting The all aluminum Two-Tier Tilt Kits mount two sets of Power Rail extrusions (sold separately) at the tilt angle specified. Tilt kits are designed for portrait module mounting and aid in increasing energy production. 60 Cell Modules P14-OP15-60 P14-OP25-60 P14-OP35-60 P14-OP Cell Modules P14-OP15-72 P14-OP25-72 P14-OP35-72 P14-OP45-72 Two-Tier 15 tilt kit 60 Cell Module Two-Tier 25 tilt kit 60 Cell Module Two-Tier 35 tilt kit 60 Cell Module Two-Tier 45 tilt kit 60 Cell Module Two-Tier 15 tilt kit 72 Cell Module Two-Tier 25 tilt kit 72 Cell Module Two-Tier 35 tilt kit 72 Cell Module Two-Tier 45 tilt kit 72 Cell Module (lbs.) Quantity Price (lbs.) Quantity Price Two-Tier Tilt Kit Includes Strong Back, Fixed Leg, Mounting Feet, Rail Brackets and Hardware. P8 Power Rail Extrusions ordered separately. Two-Tier Tilt Kit Includes Strong Back, Fixed Leg, Mounting Feet, Rail Brackets and Hardware. P8 Power Rail Extrusions ordered separately. Cross Bracing may be required. See Assembly Instructions. 23

26 Power Rail TM Module Clamps Pre-Assembled Module Clamps with RAD TM Hardware Module Clamps are Type 304 stainless steel for higher yield strength and durability. Pre-assembled module clamps feature no loose parts and a spacer that keeps free standing clamps in place for a quicker module installation. Patent Pending. Pre-Assembled End Clamp with RAD Bolt Hardware Hardware / Finish PA- EC- -RAD Coated PA- EC- -RAD-SS Stainless Steel PA- EC- -RAD-B Pre-Assembled Module End Clamp w/rad Hardware Per Unit (lbs.) 0.15 Note: Replace xxx with module depth from the Solar Module Specification Sheet. Example: PA-EC-46-RAD end clamp for Sharp NU-U240F1 modules Quantity Coated or SS Price Finish Price Pre-Assembled End Clamp w/rad Bolt Pre-Assembled AMP TM Mid Clamp with RAD Bolt Hardware The AMP Clamp eliminates the need for a seperate bonding washer. Hardware / Finish (lbs.) Quantity Coated or SS Price Finish Price PA-GMC RAD Coated Pre-Assembled Module Mid PA-GMC RAD-SS Stainless Steel Clamp for mm PA-GMC RAD-B Thick Frame PA-GMC RAD Coated Module Mid PA-GMC RAD-SS Stainless Steel Clamp for mm PA-GMC RAD-B Thick Frame PA-GMC RAD Coated Module Mid PA-GMC RAD-SS Stainless Steel Clamp for mm PA-GMC RAD-B Thick Frame PA-GMC RAD Coated Module Mid PA-GMC RAD-SS Stainless Steel Clamp for mm PA-GMC RAD-B Thick Frame PA-GMC RAD Coated Module Mid PA-GMC RAD-SS Stainless Steel Clamp for mm PA-GMC RAD-B Thick Frame Pre-Assembled AMP Mid Clamp w/rad Bolt 24

27 Power Rail TM Module Clamps Unassembled Module Clamps with RAD TM Hardware Module clamps provide a low profile design and slim 3/8 gap between modules for a professional appearance and higher module density. The standard hardware is ECOGUARD coated to provide corrosion resistance and to avoid galling. The patented RAD hardware locks in place for a more secure and reliable PV module attachment. All stainless steel construction or a black finish is also available. RAD End Clamp with RAD Bolt Hardware Hardware Finish EC- -RAD Coated EC- -RAD-SS Stainless Steel EC- -RAD-B Module End Clamp w/rad Hardware (lbs.) 0.15 Quantity Note: Replace xxx with module depth in millimeters from the Solar Module Specification Sheet. Example: EC-46-RAD end clamp for Sharp NU-U240F1 modules Coated or SS Price Finish Price End Clamp w/rad Bolt 5/16" hardware AMP TM Clamp Integrated Grounding RAD TM Mid Clamp The AMP Clamp eliminates the need for a seperate bonding washer. Hardware Finish (lbs.) Quantity Coated or SS Price Finish Price GMC RAD Coated Module Mid GMC RAD-SS Stainless Steel Clamp for mm GMC RAD-B Thick Frame GMC RAD Coated Module Mid GMC RAD-SS Stainless Steel Clamp for mm GMC RAD-B Thick Frame GMC RAD Coated Module Mid GMC RAD-SS Stainless Steel Clamp for mm GMC RAD-B Thick Frame GMC RAD Coated Module Mid GMC RAD-SS Stainless Steel Clamp for mm GMC RAD-B Thick Frame GMC RAD Coated Module Mid GMC RAD-SS Stainless Steel Clamp for mm GMC RAD-B Thick Frame AMP Clamp w/rad Bolt 5/16" hardware RAD TM Fastener is patented. 25

28 Power Rail TM Module Clamps Pre-Assembled Purlin Through Hole Clamps Purlin Through Hole clamps are Type 304 Stainless steel for higher strength and durability. The clamp allows for direct PV module mounting to purlins and other structural members. The patent pending Pre-assembled clamps eliminate handling small parts on the job site and provide for a faster installation. End Clamp with Carriage Bolt Hardware PA-EC- PA-EC- PA-EC- -PT -PT-SS -PT-B Module End Clamp w/carriage Bolt Hardware (lbs.) 0.15 FOR ORDERING SPECIFY: Standard Coated Finish (-PT suffix), Finish (-B suffix), Stainless Steel Finish (-SS suffix) Coated or SS Price Finish Price Quantity End Clamp w/carriage Bolt Note: Replace xxx with module depth in millimeters from the Solar Module Specification Sheet. Example: PA-EC-46-PT end clamp for Sharp NU-U240F1 modules Mid Clamp with Carriage Bolt Hardware (lbs.) Quantity Coated or SS Price Finish Price PAW-MC PT PAW-MC PT-SS Module Mid Clamp for mm Thick Frame PAW-MC PT-B PAW-MC PT PAW-MC PT-SS Module Mid Clamp for mm Thick Frame PAW-MC PT-B PAW-MC PT PAW-MC PT-SS Module Mid Clamp for mm Thick Frame PAW-MC PT-B PAW-MC PT PAW-MC PT-SS Module Mid Clamp for mm Thick Frame PAW-MC PT-B PAW-MC PT PAW-MC PT-SS Module Mid Clamp for mm Thick Frame PAW-MC PT-B Mid Clamp w/carriage Bolt FOR ORDERING SPECIFY: Standard Coated Finish (-PT suffix), Finish (-B suffix), Stainless Steel Finish (-SS suffix) 26

29 Power Rail TM Module Clamps Universal End Clamp Universal End Clamps are Type 304 Stainless steel for higher strength and durability. The clamps secure a wide range of PV module frames and reduce SKUs Universal End Clamp Flange Mount Bottom Access P6-ECU P8-ECU Universal End Clamp w/set Bolt for P6 Universal End Clamp w/set Bolt for P8 Per Quantity Price

30 Power Rail TM Module Clamps Pre-Assembled Module Clamps with WEEB Grounding The patent pending Pre-assembled clamps eliminate handling small parts on the job site and provide for a faster installation. Includes grounding washer for penetrating and bonding PV modules to anodized or coated mounting rails. Pre-Assembled Mid Clamp with RAD TM Bolt Hardware and WEEB-DPR (lbs.) Hardware / Finish Quantity Coated or SS Price Finish Price PAW-MC RAD Pre-Assembled Coated Module Mid PAW-MC RAD-SS Clamp Stainless Steel for mm PAW-MC RAD-B Thick Frame PAW-MC RAD Module Mid Coated PAW-MC RAD-SS Clamp for mm Stainless Steel PAW-MC RAD-B Thick Frame PAW-MC RAD Module Mid Coated PAW-MC RAD-SS Clamp for mm 0.08 Stainless Steel PAW-MC RAD-B Thick Frame PAW-MC RAD Module Mid Coated PAW-MC RAD-SS Clamp for mm Stainless Steel PAW-MC RAD-B Thick Frame PAW-MC RAD Module Mid Coated PAW-MC RAD-SS Clamp for mm Stainless Steel PAW-MC RAD-B Thick Frame Pre-Assembled Mid Clamp w/rad Bolt and WEEB-DPR Note: Pre-assembled Mid Clamps provide for a 3/8" gap between modules. 28

31 Power Rail TM Accessories Grounding Hardware WEEB-DPF* WEEB-11.5* Module Grounding Clip Splice Plate Grounding Clip (lbs.) WEEBL-8.0-KIT* Rail Grounding Lug 0.19 WEEB-8.0-RBJ- KIT* ACC-PV* ACC* Rail Bonding Jumper ACME PV Cable Clip ACME 2 Cable Clip NOTE: Cable Clips snugly hold 1 or 2 designated cables. *MUST order in quantities of 10 Quantity Non- Discountable Price FOR ORDERING SPECIFY: Standard Coated Finish (-PT suffix), Finish (-B suffix), Stainless Steel Finish (-SS suffix) WEEB-DPF Module Grounding Clip WEEB 11.5 WEEB Rail Grounding Lug Rail Bonding Jumper ACME PV Cable Clip Turn Bolts ACME-2 Cable Clip Hardware / Finish (lbs.) Quantity Price TB Coated 5/16" x 3/4" Turn Bolt w/ TB-SS Stainless Steel Flange Nut TB-1 Coated 5/16" x 1" Turn Bolt w/ TB-1-SS Stainless Steel Flange Nut

32 Power Rail TM Accessories Power Post Flashing OF* SMF* RFC* Attachment Hardware Oatey Flashing with Rubber Boot for 1.31" posts Aluminum One Piece Flashing Rubber Flashing Collar (lbs.) Qty. Price NOTE: Oatey No-Calk NC-1 Solar flashing are galvanized with a UV Rubber Boot that fits onto the Power Post. Oatey flashing may be used on roofs with 0-45 degree angles. *MUST order in quantities of 12 No-Calk is a registered trademark of Oatey Co. Non- Discountable Price RFC OF - Flashing with Rubber Boot SMF Rubber Flashing Collar (for use with solid metal flashing) Flat Roof Flashing LPK4* 4" Lockin Pocket 1.7 LPK6** 6" Lockin Pocket 2.6 HFUS Hurricane Force Universal Sealer Non- Discountable (lbs.) Quantity Price Price Lockin Pocket NOTE: Lockin' Pockets and Hurricane Force Sealer are backed by a third party warranty on all flat roof penetrations. BPAG Battery Powered Applicator Gun *MUST order in quantities of 6 **MUST order in quantities of 4 30

33 Power Rail TM Accessories Wire Management Clips Wire management clips are made from stainless steel and secure cables to PV modules and mounting rails to simplify wire management (lbs.) Quantity Price XD-WC XD Wire Management Clip XD/UD/MD/LD Clip UD-WC UD Wire Management Clip LD-WC LD Wire Management Clip MD-WC MD Wire Management Clip

34

35

36 2716 Vassar Place NE Albuquerque, New Mexico USA Telephone: Toll Free: (800) Fax: Web site: Preformed Line Products SL-ML P Preformed Line Products (Canada) Limited 1711 Bishop St. N Cambridge, ON N1T 1N5 Telephone: Fax: Web site: sales@preformed.ca