MULTI-RIB/R-PANEL. R-Panel
|
|
- Ginger Norton
- 6 years ago
- Views:
Transcription
1
2 MULTI-RIB/R-PANEL Multi-Rib Multi-Rib Roofs & Walls 1 ( With Purlin Bearing Leg ) 36 Cover Width R-Panel 1.25 R-Panel Roofs & Walls ( With Purlin Bearing Leg ) 36 Cover Width Multi-Rib Walls Only ( Without Purlin Bearing Leg ) Cover Width R-Panel Walls Only ( Without Purlin Bearing Leg ) 36 Cover Width Multi-Rib and R-Panel Load Tables and Section Properties For any available Test Data, Section Properties or Load Tables, please visit For additional information, please contact the McElroy Engineering Department at Details: - Minimum slope: 1:12 (with sealant) - Multi-Rib is also available with MoistureLok Panel Options: - Roof panels: purlin bearing leg required - Wall panels: non-purlin bearing leg optional - Coating: - Kynar 500 (PVDF) - Silicone Modified Polyester (SMP) 1 - Substrate: - Standard 26 GA Galvalume (roof and wall panels) - Multi-Rib: optional 24, 22 GA Galvalume (wall panels) - R-Panel: optional 24, 22 GA Galvalume (wall panels only) Notes: - Oil canning is inherent in all metal panels and is not cause for panel rejection. - Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a McElroy Metal color chart. - Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroy s website at
3 MULTI-COR/M-COR Multi-Cor M-Cor 2.67 Multi-Cor Panel 2.67 M-Cor Panel Cover Width for Roofing and Siding Cover Width for Roofing and Siding Multi-Cor and M-Cor Load Tables and Section Properties For any available Test Data, Section Properties or Load Tables, please visit For additional information, please contact the McElroy Engineering Department at Details: - Multi-Cor minimum slope: 1:12 - M-Cor minimum slope: 1:12 - Tape sealant required on all slopes - Can be installed over solid deck or open framing - Multi-Cor and M-Cor are produced in Bossier City, LA Panel Options: - Coating: - Kynar 500 (PVDF) - Silicone Modified Polyester (SMP) - Substrate: - Standard 26 GA Galvalume - Optional 24, 22 GA Galvalume (Multi-Cor) - Optional 29, 24 GA Galvalume (M-Cor) Notes: - Oil canning is inherent in all metal panels and is not cause for panel rejection. - Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a McElroy Metal color chart. - Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroy s website at 2
4 U-PANEL U-PANEL PURLIN BEARING PROFILE 6 (typ.) Cover Width U-Panel U-PANEL NON- PURLIN BEARING PROFILE Master Coil Width: 4 U-PANEL NON- PURLIN BEARING PROFILE 6 (typ.) 6 (typ.) Cover Width 36 Cover Width Master Coil Width: 40 7/8 (29 GA Only) Master Coil Width: 41 9/16 U-Panel Load Tables and Section Properties For any available Test Data, Section Properties or Load Tables, please visit For additional information, please contact the McElroy Engineering Department at Details: - Minimum slope: 1:12 (with sealant) Panel Options: - Roof panels: purlin bearing leg required - Wall panels: non-purlin bearing leg optional - Coating: - Kynar 500 (PVDF) - Silicone Modified Polyester (SMP) - Substrate: - Standard 26 GA Galvalume (roof and wall panels) - Optional 29, 24, 22 GA Galvalume (wall panels) 3 Notes: - Oil canning is inherent in all metal panels and is not cause for panel rejection. - Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a McElroy Metal color chart. - Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroy s website at
5 MULTI-V/MINI-RIB Multi-V Mini-Rib 1 (Nom.) Multi-V Panel Mini-Rib Panel / Cover Width 36 Cover Width Multi-V and Mini-Rib Load Tables and Section Properties For any available Test Data, Section Properties or Load Tables, please visit For additional information, please contact the McElroy Engineering Department at Details: - Multi-V is to be used as a wall panel only - Mini-Rib is not applicable for exterior roof panels - Mini-Rib is produced in Bossier City, LA Panel Options: - Coating: - Kynar 500 (PVDF) - Silicone Modified Polyester (SMP) - Substrate: - Multi-V - Standard 26 GA Galvalume - Optional 24 GA Galvalume - Mini-Rib - Standard 26 and 29 GA Galvalume - Optional 24 GA Galvalume 4 Notes: - Oil canning is inherent in all metal panels and is not cause for panel rejection. - Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a McElroy Metal color chart. - Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroy s website at
6 TRIM Simple Base Trim ITBD 2 3/ MULTI-RIB/R-PANEL 1 3/ 3/ Base Trim ITBT 1 3/ 2 5/8 Zee Trim ITZF 1 3/ 1 1/ 26 GA 2 5/8 Masonry Wainscoat ITMW 4 1/ Alternate Masonry Wainscoat ITAMW 1 1/ 1 1/ Outside Corner ITOC 1 3/ Color Side / 20ʼ - 1 3/ Inside Corner ITIC 1 3/ 1 3/ Outside Angle Trim ITOA Inside Angle Trim ITIA Jamb Trim ITJT 2 1/ 1/ 1 1/ Head Trim ITHT 1 1/ 2 1/ Mini Jamb / Header Cover ITMHJ Jamb / Head Cover Trim ITHJ 2 7/16 8 1/8 7ʼ - 8ʼ - 9ʼ - Eave Trim ITET 1 Sculptured Eave Trim ITSE 3 3/8 1 Rake Trim ITRT 1 3/ 6 1/ 1/ 2 1/8 20ʼ - 5 Rake Tie-In Trim ITEW 2 1/ specify roof pitch 5 1/ 1 3/ Rake Closure IT-RT 6 3/ Color Side Up High Side Eave Trim ITHS 8 3/ 1 20ʼ -
7 TRIM High Side Tie-In Trim ITSW 2 1/ MULTI-RIB/R-PANEL 1 Ridge Cap ITRC 11 1/ 11 1/ 1 Multi-Rib Formed Ridge Cap MRC 26 GA 1 6 1/ 15 or or 18 R-Panel Formed Ridge Cap RRC 1 Fixed Peak Box (Additional Roof Pitch Available) IT-PBF 1ʼ Variable Peak Box IT-PBV Field cut as required for pitch 2ʼ 2ʼ Field bend 15 or or /8 1ʼ - 8 Field cut as required for pitch Outside Corner Box for Standard Gutter (Right Hand Shown Left Hand Opposite) IT-OCB Gutter Corner Box For Sculptured Gutter (Right Hand Shown Left Hand Opposite) ITGCB 3 1/ 6 1/ High Side Corner Box (Right Hand Shown Left Hand Opposite) ITHSCB 8 4 1/ 1/2:12 up to 2:12 roof slopes with standard gutter. 2:12 up to 4:12 roof slopes with sculptured gutter. Standard Gutter 1/2:12 to 2:12 Pitch ITSG1 3/ 7/8 Snow guards required to prevent damage caused by sliding snow. 5 3/8 Standard Gutter End Cap (Right Hand Shown Left Hand Opposite) ITSGEC1 4 3/8 4 15/16 Color Side Up 1 1/8 20ʼ - Sculptured Gutter 2 to 4:12 Pitch ITSG4 1 1/ Snow guards required to prevent damage caused by sliding snow. Standard Gutter End Cap 2:12 to 4:12 Pitch ITSGEC4 1 15/ /16 Varies with Pitch 4 13/16 Color Side Up 3 1/ 1 Varies with Pitch 20ʼ - Gutter Strap IT-GS 15/16 15/16 Sculptured Gutter End Cap (Right Hand Shown Left Hand Opposite) ISGEC 4 3/ 2 11/16 Color 4 3/8 Side Up 5 1/ 1 5/8 0ʼ specify roof pitch 3 15/ / /16
8 TRIM x Downspout Elbow A-Style BBPELA MULTI-RIB/R-PANEL Aluminum Downspout Outlet BBPOUT 4 3/ Downspout x BBPDS 26 GA 1 3/8 9.5 Downspout Strap BBPDSS 14ʼ 8.5 Lock-Seam Downspout - Corner (Right Hand Corner Shown) Please specify left or right hand corner Lock-Seam Downspout Outlet - Standard 3 3/8 5 7/8 3 7/8 Lock-Seam Downspout - Center / Lock-Seam Downspout Strap 3 3/8 3 3/8 Skylight Side Trim - UL90 (For Use with Multi-RIb Panels) 1/ 1 3/8 1 1/ 1 3/8 Skylight Side Trim - UL90 (For Use with R-Panels) 1 5/8 1 1/8 4 1/ 1/ 1 3/8 TRIM Simple Base Trim CORSB MULTI-COR/M-COR Base Trim CORBT Masonry Wainscoat CORMW 4 1/ 26 GA 7 specify roof pitch 3/ 1 1/ /
9 TRIM Outside Angle Trim COROA MULTI-COR/M-COR Jamb Trim CORJT Head Trim CORHT 26 GA 2 1/ 1/ 3/ 2 3/ 7/8 Jamb / Head Cover Trim ITHJ Eave Trim CORET 1 Rake Trim CORRT 5 2 7/16 8 1/8 1/ 4 3/8 5/8 Rake-Tie-In COREW High Side Eave Trim CORHS 1 High Side Tie In Trim CORSW 1 2 5/8 4 5/8 2 1/ 4 3/ 3 7/8 5/8 6 1/ 7ʼ - 8ʼ - 9ʼ - Ridge Cap CORRF 11 1/ 11 1/ Downspout x BBPDS 1 Gutter CORGT 5 4 1/ 1 1 1/ 20ʼ - Gutter Strap COR-GS Gutter End Cap CORGEC 4 15/16 4 7/8 1 7/16 x Downspout Elbow A-Style BBPELA 3 7/8 14ʼ Aluminum Downspout Outlet BBPOUT 4 3/ /8 Downspout Strap BBPDSS 8 specify roof pitch 8.5
10 U-PANEL TRIM 26 GA Simple Base Trim U-SB Base Trim U-BT Zee Flashing U-ZF 1 3/ 3/ 1 1/ Masonry Wainscoat U-MW 4 1/ Outside Corner U-OC 1 1/16 3 3/16 1 1/16 Inside Corner U-IC 3/ 5 3/ 1 1/16 1 1/16 1/ 3 3/16 1 1/8 3/ Outside Angle Trim U-OA Inside Angle Trim U-IA Jamb Trim U-JT 2 1/ 1/ 3/ 7/8 Color Side Head Trim U-HT Eave Trim U-EF 1 Sculptured Eave Trim U-SE 3 13/ / 2 11/16 1/ Color Side 1/ 9 Rake Trim U-RT 1 1/16 specify roof pitch 5 1/ High Side Eave Trim U-HS 8 3/ 1 Rake Tie-In Trim U-EW 2 1/ 2 7/16 High Side Tie-In Trim U-SW 2 1/ 1 1/16 H Rake Closure U-RC 6 3/ Up 1 Ridge Cap U-RC 11 1/ 11 1/ 6 1/ 1 Indicates an open hem - All other hems are closed.
11 U-PANEL TRIM 26 GA Formed Ridge Cap URC 1 Fixed Peak Box (Additional Roof Pitch Available) U-PB 1ʼ Outside Corner Box for Standard Gutter (Right Hand Shown Left Hand Opposite) U-OCB Gutter Corner Box For Sculptured Gutter (Right Hand Shown Left Hand Opposite) U-GCB 6 1/ / 6 7/8 High Side Corner Box (Right Hand Shown Left Hand Opposite) U-HSC 8 1ʼ - 8 Gutter U-GT 1/2:12 up to 2:12 roof slopes with standard gutter. 5/8 7/8 5 7/8 4 1/ 2:12 up to 4:12 roof slopes with sculptured gutter. Sculptured Gutter U-SG 7/ / 6 7/8 Gutter End Cap UGEC5 4 7/8 4 13/16 Color Side Up 1 5/8 3 7/16 Gutter End Cap Sculptured UGECT 4 9/16 6 Color Side Up 3 5/ / /16 3 7/16 Gutter Strap U-GS Aluminium Downspout Outlet BBPOUT Downspout BBPDS 1 1/8 4 3/ 15/ /8 Downspout Strap BBPDSS 0ʼ - 6 A-Style Elbow BBPELA 14ʼ specify roof pitch 8.5 H Indicates an open hem - All other hems are closed.
12 MULTI-V TRIM 26 GA Simple Base Trim ITBD 2 3/ 3/ Base Trim ITBT 1 3/ 2 5/8 Masonry Wainscoat ITMW 4 1/ 1 3/ 2 5/ / Alternate Masonry Wainscoat ITAMW 1 1/ 1 1/ Multi-V Outside Corner 1 3/ 5 1/ Outside Angle Trim ITOA 20ʼ - 1 3/ 5 1/ Inside Angle Trim ITIA Jamb Trim ITJT Head Trim ITHT 2 1/ 2 1/ 1/ 1 1/ 1 1/ Jamb / Head Cover Trim ITHJ 2 7/16 8 1/8 TRIM Inside Angle Trim ITIA MINI-RIB Outside Angle Trim ITOA 11 specify roof pitch
13 MULTI-RIB / R-PANEL / MULTI-COR M-COR / U-PANEL / MULTI-V / MINI-RIB ACCESSORIES 1/4-14 x 1 1/ TEK2 ZAC Self-Driller (Part # Varies by Color) 1/4-14 x 7/8 LAPTEK ZAC Self-Driller (Part # Varies by Color) #14 x 1 1/ Type AB ZAC (Part # Varies by Color) #12-14 x 1 1/ TEK2 HWH w/washer Self-Driller (Part # Varies by Color) #12-14 x 1 1/ TEK2 ZAC Self-Driller (Part # Varies by Color) 1/4-14 x 7/8 LAPTEK HWH w/washer Self-Driller (Part # Varies by Color) #9-15 Type A Woodgrip W/Washer (Part # varies by color) 1 1/ 2 1/ #10-15 Woodgrip HILO ZAC (Part # varies by Color) 43D Pop rivets (Part # varies by color) Touch-Up Paint Pen (Part # Varies by Color) Roll Tape Sealant 3/3 X X 45ʼ Item #: Roll Tape Sealant 1/8 x x 30ʼ Item #: White Urethane Sealant Item #: Titebond Caulk Sealant (Part # varies by color) Butyl Tube Sealant Item #: Multi-Rib Outside Closure With Adhesive: Without Adhesive: R-Panel Outside Closure With Adhesive: Without Adhesive: Multi-V Outside Closure Multi-Rib Inside Closure With Adhesive: Without Adhesive: R-Panel Inside Closure With Adhesive: Without Adhesive: Multi-V Inside Closure Mini-RIb Closure Multi-Cor Closure M-Cor Closure Images not drawn to scale.
14 MULTI-RIB / R-PANEL / MULTI-COR M-COR / U-PANEL / MULTI-V / MINI-RIB ACCESSORIES Multi-Rib Fiberglass Panel Available in Clear, White and Opal 11ʼ ʼ ʼ R-Panel Fiberglass Panel Item #: U-Panel Fiberglass Panel 37 3/8 X 12ʼ Item #: ʼ Sunsky Clear Polycarbonate Panel (For MULTI-RIB) Available in Clear and White Sunsky Clear Polycarbonate Panel (For R-PANEL) Available in Clear and White Not inventoried at all locations. 8ʼ 10ʼ 12ʼ Not inventoried at all locations. 8ʼ 10ʼ 12ʼ Notes: 13 Images not drawn to scale.
15
16 5215 Leo St. Alexandria, LA Wilso Dr, Baltimore, MD Hamilton Rd. Bossier City, LA Yadkin Road Chesapeake, VA Meadowbrook Rd. Clinton, IL Highway 59 Diamond, MO N. Valley Dell Dr. Fenton, MO Lovejoy Road Ft. Walton Beach, FL Lincoln Court Garland, TX Aldine Bender Road Houston, TX E. 59th Street Indianapolis, IN US Hwy. 60 W. Lewisport, KY Terminal Dr. McFarland, WI Cave Road Nashville, TN Hwy. 70 E. North Little Rock, AR North Bierdeman Rd. Pearl, MS Tower Street Richland Hills, TX Oakley Industrial Blvd. Union City, GA rd Street Sacramento, CA Silstar Rd. West Columbia, SC Dean Forest Rd. Savannah, GA McGhee Rd. Winchester, VA MM424-A Rev
PBR & PBU PANELS. Technical/Installation Information
PBR & PBU PANELS Technical/Installation Information IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE Retro-R PANELS. THE MANUFACTURER DETAILS MUST BE FOLLOWED AS
More information238T and 138T Panel and Accessories Price List 9/29/2017 (price good for shipments through 11/31/2017) Customer Job Date Sales Rep 238T PANEL ITEM #
238T and 138T Panel and Accessories Price List 9/29/2017 (price good for shipments through 11/31/2017) Customer Job Date Sales Rep 238T PANEL ITEM # DESCRIPTION SELLING PRICE UOM 238T 238T Seam Cap 24
More informationCentral Texas Metal Roofing Supply Co., Inc 36" NET COVERAGE SHEET WIDTH 38 ¼ 40 ¼ 38 ¼ 40 ¼ 38 ¼ 40 ¼ 40 ¼ 40 ¼
36" 1 2 " 6" GAUGE PANEL FINISH NET COVERAGE SHEET WIDTH WEIGHT PER SQ. 26 26 26 26 24 24 24 24 TEXAS RIB CHANNEL GUARD TEXAS RIB CHANNEL GUARD TEXAS RIB CHANNEL GUARD CHANNEL GUARD CHANNEL GUARD GALVALUME
More informationPIPE. Central Texas Largest Distributor. Structural Steel, Pipe and Metal Building Components
Central Texas Largest Distributor Structural Steel, Pipe and Metal Building Components PIPE Waco Location P.O. Box 154485 913 South Loop Dr. Waco Texas 76705 Local - 254-754-2611 Bryan Location 9401 E.
More informationS BI COM P ON E NT CA T ALOG
SBI METAL BUILDINGS & COMPONENTS S BI COM P ON E NT CA T ALOG Date: 03 / 16 / 2017 COMMERCIAL PRODUCTS Commercial Panels and Trim Cee, Zee, Eave Struts, Angle, Channel, and Clips Accessories FT 0 1 2 3
More informationPBR & PBU Panels. Technical/Installation Information
PBR & PBU Panels Technical/Installation Information TABLE OF CONTENTS A. PBR Panel 1. General Description..................................................................... 2 2. Architect/Engineer Information............................................................
More informationResidential Pricing Guide
Guide TABLE OF CONTENTS Panels 5V Crimp Slimline 2 4 Accessories Flat Sheets Coils V-Groove Soffit Ridge Caps Roof Jacks Touch-up Paint Insulation Slimline Rib Cover Closure Strips Tube Sealant 6 6 7
More informationTRIAD CORRUGATED METAL, INC.
TRIAD CORRUGATED METAL, INC. C O M M E R C I A L R E S I D E N T I A L A G R I C U L T U R A L Snap Loc Panel Guide Snap Loc metal panels are a perfect fit for residential, architectural and commercial
More informationWestern States 7/8 Corrugated
Western States 7/8 Corrugated Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer / Installers..1 Fastener Placement and Selection.2-3 Key
More informationCentral Texas Metal Roofing Supply Co., Inc NET COVERAGE SHEET WIDTH
1 2 " 1 24" GAUGE PANEL FINISH NET COVERAGE SHEET WIDTH WEIGHT PER SQ. 26 5 Vee GALVALUME 24 26 3/8 95.00 PRICE PER SQ. PRICE PER LINEAR FOOT PANEL PRICING: 1. Price per Square is based on 26 3/8 sheet
More informationTREMLOCK SL INSTALLATION MANUAL
TREMLOCK SL INSTALLATION MANUAL TREMLOCK SL TremLock SL i a concealed fatener architectural tanding eam roof panel. The TremLock SL panel are eaily intalled over decking, utilizing metal clip. TremLock
More informationCentral Seam Plus. Central-Loc
Central Seam Plus Central-Loc Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 3" 3" " or 18" COVERAGE " or 18" COVERAGE Central Seam Plus Field seamed Central-Loc Snaps together
More informationCATALOG 2017 METAL ROOF & WALL SYSTEMS
CATALOG 2017 METAL ROOF & WALL SYSTEMS Table Of Contents Thomas E. McElroy Sr. (Mr. Mac) in 1963 posing with the company s first rollformer. From humble beginnings in 1963, McElroy Metal has grown into
More informationNUCOR VR 16 II STANDING SEAM ROOF SYSTEM TABLE OF CONTENTS
NUCOR VR 16 II STANDING SEAM ROOF SYSTEM TABLE OF CONTENTS Nucor VR16 II Vertical Rib Standing Seam Roof System...2 Nucor VR16 II Property and Span Tables...3 Standard Details...5 ED3010PE - Gutter...5
More informationMIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 NOTICE OF ACCEPTANCE
More informationSECTION METAL ROOF PANELS
SECTION 07 41 13 PART 1 GENERAL 1.1 SECTION INCLUDES A. Standing-seam roof panels. B. Metal roofing accessories. 1.2 RELATED SECTIONS A. Section 07 62 00 - Sheet Metal Flashing. B. Section 07 72 00 - Roof
More informationRetro-R DESIGN/INSTALLATION INFORMATION
Retro-R DESIGN/INSTALLATION INFORMATION IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE Retro-R PANELS. THE MANUFACTURER DETAILS MUST BE FOLLOWED AS A MINIMUM TO
More informationINSTALLATION INSTRUCTIONS for MP-RC1 TWO PIECE CONSTRUCTION TO BE INSTALLED ON COMPLETED ROOF DECK
INSTALLATION INSTRUCTIONS for MP-RC1 TWO PIECE CONSTRUCTION TO BE INSTALLED ON COMPLETED ROOF DECK A. 1. Using curb ribs as a guide, layout and mark roof openings on completed roof deck as outside curb
More informationDETAIL MANUAL A COMPREHENSIVE GUIDE TO METAL ROOFING GULFLOKTM HIDDEN SCREW METAL ROOF SYSTEM
DETAIL MANUAL A COMPREHENSIVE GUIDE TO METAL ROOFING GULFLOKTM HIDDEN SCREW METAL ROOF SYSTEM Gulf Coast Standing Seam Roofing Panels Since 2004, Gulf Coast Supply and Manufacturing has been happy to offer
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PP-01-KSV PANEL PROFILES CS-PP-02-KSV PANEL PROFILES CS-PP-03-KSV PANEL PROFILES CS-PJ-01-KSV KS SERIES EXPANDED PANEL JOINT CS-PJ-02-KSV KS SERIES ENGAGED PANEL JOINT CS-PJ-03-KSV
More informationDrexel Metals Clips and Accessories
Drexel Metals Clips and Accessories Your machine makes one component of the total metal roof system. Drexel Metals has invested millions of dollars to ensure our metal roof system meet the required building
More informationPrior to ordering and installing materials, all dimensions should be verified by field measurements.
Important Information The application and detail drawings in this manual are strictly for illustration purposes and may not be applicable to all building designs or product installations. All projects
More informationCS-100 Guide Specifications
MANUFACTURER CUSTOM-BILT METALS 1333 Corporate Drive, Suite 103 Irving, Texas 75038-2520 (800) 826-7813 or info@custombiltmetals.com www.custombiltmetals.com CS-100 Guide Specifications This Guide Specification
More informationSTILE. Panel Information. Design/Installation Considerations. Flashing Profiles. Detail Conditions. Notes. Accessory Profiles. Testing Information
Table of ontents Product Page No. Product Page No. Panel Information Profile...PST-2 Panel Overview...PST-2 Flashing Profiles Eave...PST- Extended Eave...PST- leat...pst- Stile Starter...PST- Box Gutter...PST-
More informationM-Loc. Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 36" COVERAGE
M-Loc Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 13 /" 36" COVERAGE 6" Copyright 2018, Central States Manufacturing, Inc., All Rights Reserved. D C GUID_PROD_MLOC_180201
More informationBuilt to Last a Lifetime
Built to Last a Lifetime Welcome to Lincoln 2 This brochure will introduce you to Lincoln Steel Buildings from the ground up starting with the framing of the building all the way to the roof and finally
More informationNuRoof Retrofit Systems. Technical/Installation Information
Retrofit Systems Technical/Installation Information INTRODUCTION If your roof is causing problems due to leaks, high maintenance costs and low energy efficiency, the MBCI NuRoof Retrofit System is the
More informationPRE-ENGINEERED METAL BUILDING SYSTEM
PRE-ENGINEERED METAL BUILDING SYSTEM PART 1 GENERAL 1.1 SUMMARY A. The building shall include all primary and secondary structural framing members, connection bolts, roof and wall covering, flashing, gutter,
More informationCLIP-LOC. Panel Information. Detail Conditions. Flashing Profiles. Notes. Accessory Profiles. Testing Information. Design/Installation Considerations
LIP-LO Table of ontents Product Page No. Product Page No. Panel Information lip-loc Panel Profile... PL-2 Panel Overview... PL-2 Flashing Profiles Eave... PL- leat... PL- Box Gutter... PL- Box Gutter End...
More informationRIB PANEL INSTALLATION
GOLDIN METALS, INC. www.goldinmetals.com 12440 SEAWAY ROAD Mailing Address: 14231 SEAWAY ROAD, SUITE 7000 GULFPORT, MS 39503 (228) 896-6216, Ext. 230 FAX (228) 896-4873 4400 PETERS ROAD P.O. BOX 700 HARVEY,
More informationDRAWING INDEX Description
DRAWING INDEX Qty. Description TOOL LIST PAGE #1 PANEL & PANEL RACK HANDLING TIPS 2 BASIC BUILDING COMPONENTS 3 ELEVATIONS 4 MATERIALS LIST 5 BUILDING LAYFLAT 6 FOUNDATION PREPARATION PLAN VIEW 7 BASE
More informationSpecifier Note: Revise paragraph below to suit project requirements. Add section numbers per CSI MasterFormat and specifier s practice.
McElroy Metal, Inc. 1500 Hamilton Rd. Bossier City, LA 71111 Phone: (800) 562-3576 Phone: (318) 747-8097 Fax: (318) 747-8099 E-mail: info@mcelroymetal.com www.mcelroymetal.com This MANU-SPECª utilizes
More informationCentral Snap. Condition Details C SNAPDETAILS
Central Snap Condition Details D C SNAPDETAILS150612.2 The men and women at Central States Manufacturing, Inc. would like to welcome you. OUR MISSION Central States Manufacturing, Inc. is a 100% employee-owned
More informationProduct Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES
5V Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES ½" 24" COVERAGE Copyright 2018, Central States Manufacturing, Inc., All Rights Reserved. D C GUID_PROD_5V_180201 The men
More information200 / 300 SERIES PANELS COLD STORAGE
CS-DS-01-200/300 DISCLAIMER CS-CD-01-200/300 KINGSPAN CEILING DESIGN POLICY AND PROCEDURES CS-CD-02-200/300 KINGSPAN CEILING DESIGN POLICY AND PROCEDURES CONTINUED CI-PP-01-200 PANEL PROFILES 200 SERIES
More informationT-Rib Roofing System
T-Rib Roofing System Installation Manual 3449 Hempland Road Lancaster, PA 17601 (717) 397-2741 308 Alabama Blvd. Jackson, GA 30233 (770) 775-4484 World Wide Web: www.fabral.com E-Mail: fabinfo@fabral.com
More information5V CRIMP. Technical/Installation Information
5V CRIMP Technical/Installation Information IMPORTANT NOTICE READ THIS MANUAL OCMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE SYSTEM. ALWAYS INSPECT EACH AND EVERY PANEL AND ALL ACCESSORIES BEFORE
More informationDAN S CUSTOM SHEETMETAL Manufacturer and Distributor
About the Company DAN S CUSTOM SHEETMETAL Manufacturer and Distributor In 1993, DCSM was the first manufacture in the state of Florida to fabricate metal eave closure for tile. We have established a reputation
More informationGuide Specification SDP 200
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Sheet metal roofing panels, metal trim, accessories, fasteners, closures, and sealants. [Specifier Note: Edit paragraph below to suit project requirements.]
More informationUNA-CLAD Metal Roofing Systems Application Guide
UNA-CLAD Metal Roofing Systems Application Guide UC-3 Double-Lock Architectural Series UC-4 No-Clip Architectural Series UC-6 Double-Lock Structural Series UC-14 Snap-Lock Standing Seam Series March 22,
More informationSapphire Metal Tile Roofing System
Sapphire Metal Tile Roofing System Sapphire Metal Tile Roofing Benefits of Sapphire Metal Tile - Beauty and function - Tile Beauty, Steel Strength, Lasts a lifetime - Excellent long term investment - Pays
More informationStrongSeam SSFF1 Panel
StrongSeam SSFF1 Panel Installation Manual May 2016 12 TO 24 COVERAGE CLIP OFFSET STRIATED PANEL (2 STRIATION BEADS ON PANEL) 0.875 0.9375 26 ga. & 24 ga. UL90 #529 UL2218 Class IV/Impact UL790 Class A/Fire
More informationFACADES - ACM BASE AT OVERHANG (WITH BASE FLASHING) INDEX SHEET
KPH-DS-01-MTLV KPH-PJ-01-MTLV KPH-PJ-02-MTLV KPH-PJ-03-MTLV KPH-PJ-04-MTLV KPH-PJ-05-MTLV KPH-BS-01-MTLV KPH-BS-02-MTLV KPH-BS-03-MTLV KPH-BS-04-MTLV KPH-OC-01-MTLV KPH-IC-01-MTLV KPH-SF-01-MTLV KPH-SF-02-MTLV
More information1 1/2" SSR. FABRAL The pursuit of excellence since 1967
1 1/2" SSR Detail Manual and Estimate Guide 16" 1 1 2" PROPER STORAGE When moisture remains in contact with Galvanized panels in the absence of freely circulating air, white, black or dark gray corrosion
More informationSpecifications for FL-100 Soffit Panel
Union Corrugating Company Specifications for FL-100 Soffit Panel SECTION 07410 METAL SOFFIT PANELS PART 1 GENERAL 1.1 DESCRIPTON A. Section Includes: 1. Preformed metal soffit panel system 2. Associated
More informationSECTION MANUFACTURED ROOF AND WALL PANELS SECTION SHEET METAL ROOFING
SPECIFICATIONS www.englertinc.com MANUFACTURER ENGLERT, INC. 1200 Amboy Avenue Perth Amboy, New Jersey 08861 Tel: (732) 826-8614 Fax: (732) 826-8865 PART I - GENERAL 1.01 WORK INCLUDED SECTION 07410 -
More informationHANDBOOK OF CONSTRUCTION DETAILS
HANDBOOK OF CONSTRUCTION DETAILS ARCHITECTURAL PRODUCTS FOR THE BUILDING INDUSTRY 12" SSR, Decor-Flush 7, Amp Lok, Double Lock, GrandCurve, High Seam, Posi-Lock Soffit, Slim Seam 7, Snap-on-Batten, Snap-On-Seam,
More informationTABLE OF CONTENTS IMAGE II. Detail Conditions. Panel Information. Flashing Profiles
TABLE OF ONTENTS Product Page No. Product Page No. Panel Information Profi les...pim-2 Panel Overview...PIM-2 Flashing Profiles Eave...PIM-3 Extended Eave...PIM-3 leat...pim-3 Offset leat...pim-3 5K Gutter...PIM-3
More informationALLMET CONTINENTAL INSTALLATION GUIDE
ALLMET CONTINENTAL INSTALLATION GUIDE www.allmet.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Allmet Continental
More informationSECTION METAL ROOFING MASTER SPECIFICATION
SECTION 07 41 13 METAL ROOFING MASTER SPECIFICATION PART I - GENERAL REQUIREMENTS 1.01 DESCRIPTION OF WORK: A. Section Includes: The extent of each type of preformed metal roofing panel as indicated on
More informationIntroduction Standard Panels Fasteners R Panel Trim R Panel Info Tex-Rib Trim Tex-Rib Info...
Contents Introduction... 1 Standard Panels... 2 Fasteners... 5 R Panel Trim... 6 R Panel Info... 9 Tex-Rib Trim... 10 Tex-Rib Info... 12 U Panel Trim... 13 U Panel Info... 15 General Trim... 16 Building
More informationFOR FIELD USE PLEASE DISTRIBUTE TO THE ERECTION CREW
COVER INSTRUCTIONS FOR INSTALLING NBS CLASSIC ROOF FOR FIELD USE PLEASE DISTRIBUTE TO THE ERECTION CREW WATERLOO, IN 305 Industrial Parkway Waterloo, IN 46793 Phone: 260-837-7891 Fax: 260-837-7384 SWANSEA,
More informationINSTALLATION GUIDE.
INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Gerard Canyon Shake counter batten
More informationGeneral Overview SECTION PBR & R PANEL - PREFORMED ROOF AND WALL PANELS
SECTION 07410 - PREFORMED ROOF AND WALL PANELS # Specifier: Notation (#) means that text following is a specifier s note or sample. PART 1 - GENERAL 1.01 Description # Specifier: Do not alter paragraph
More informationStile. Spanish Tile Installation Guide
Stile Spanish Tile Installation Guide IMPORTANT INFORMATION THE APPLICATION AND DETAIL DRAWINGS IN THIS MANUAL ARE STRICTLY FOR ILLUSTRATION PURPOSES AND MAY NOT BE APPLICABLE TO ALL BUILDING DESIGNS OR
More informationPacific Tile Counter Batten and Batten
Pacific Tile Counter Batten and Batten INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation
More informationPRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590
More informationProfessional Engineering Services. The Brand of Choice
The Brand of Choice Nucor Building Systems, a division of Nucor Corporation, is one of the most flexible and diverse building manufacturers in operation today. Nucor Corporation is a Fortune 500 Company,
More informationARCHITECTURAL METAL PANELS PRODUCT SELECTION GUIDE
A r c h i t e c t u r a l E n g i n e e r e d P r o d u c t s ARCHITECTURAL METAL PANELS PRODUCT SELECTION GUIDE 800-733-4955 www.aepspan.com Product Index and Application Guide Application Paint Systems
More informationAgricultural METAL ROOFING
Agricultural METAL ROOFING Building Relationships Since 1908 American Building Components started its business by serving the agricultural consumer. Since 1908, we have worked side by side with our customers
More informationSteelway Building Systems. Product Specifications Guide
Steelway Building Systems Product Specifications Table of Contents 1.0 Scope... 2 2.0 Design Standards... 3 3.0 Product Standards... 3 3.1 Plate, Coil and Hot-Rolled... 3 3.2 Bolts and Fasteners... 3 4.0
More informationPRODUCT SPECIFICATIONS
LokSeam LokSeam 12" One of the most versatile architectural metal panels available today, LokSeam by ABC, is a snap-together, concealed fastener, standing seam roof system with a 13/4" tall vertical rib,
More informationHIXWOOD METAL INC RESIDENTIAL METAL ROOFING PRODUCT INFORMATION
HIXWOOD METAL INC RESIDENTIAL METAL ROOFING PRODUCT INFORMATION HIXWOOD METAL INC CONTENTS SUPER-RIB... RESIDENTIAL-RIB... SNAP PANEL... SIDING MACHINE... SUPER-RIB - POST FRAME TRIM... 5-9 SUPER-RIB
More informationVERTICAL SEAM TABLE OF CONTENTS
TABLE OF ONTENTS Product Page No. Product Page No. Panel Information Vertical Seam Panel Profi les... PVS- Panel Overview... PVS- Flashing Profiles Eave... PVS- Extended Eave... PVS- leat... PVS- Offset
More informationPRE-ENGINEERED METAL BUILDINGS
PRE-ENGINEERED METAL BUILDINGS CONTENTS Section 1: General Section 2: Structural Steel Design Section 3: Basic Material Specifications Section 4: Structural Framing Section 5: Roof and Wall Covering Section
More informationTop Ten List: What Gets Metal Roof Designers in Trouble?
Top Ten List: What Gets Metal Roof Designers in Trouble? Brian Gardiner, FRCI, RRC, CCS BMG Enterprises, LLC 180 elvira, Canyon lake, TX 78133 Phone: 512-784-3791 e-mail: brian.bmgent@gmail.com Charlie
More informationSECTION MANUFACTURED ROOF AND PANELS SECTION SHEET METAL ROOFING
SPECIFICATIONS www.englertinc.com MANUFACTURER ENGLERT, INC. 1200 Amboy Avenue Perth Amboy, New Jersey 08861 Tel: (732) 826-8614 Fax: (732) 826-8865 PART I - GENERAL 1.01 WORK INCLUDED SECTION 07410 -
More informationBattenLok HS. Technical/Installation Information
BattenLok HS Technical/Installation Information IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE ROOFING SYSTEM. THE MANUFACTURER DETAILS MUST BE FOLLOWED AS A MINIMUM
More informationLight-Metal Roof Edge, Raised
NAIL WOOD CANT TO BLOCKING 2 ROWS STAGGERED EACH ROW 24 O.C. 1/2 MIN. 10 0 MAX. FASTEN 18 O.C. WITH NEOPRENE GASKETED FASTENERS 3-1/2 MIN. 4 6 JOINT COVER PLATE SET IN TWO BEADS OF SEALANT 4 MIN. SPECIFIED
More informationGeneral. 2. Design. 3. Anchor Bolts And Foundations. 4. Drawings. 5. Structural Framing. 6. Roof Covering Nucor Classic Roof Panel
The following Nucor Building Systems Specification Guide provides the owner or design professional a detailed description of all standard Nucor Building Systems (NBS) products. This guide is designed to
More informationOlympia is recognized as one of the industry leaders in providing superior quality, service and durability at low prices.
40 Our buildings are manufactured entirely in the United States and include a 40-year limited rust-through perforation warranty on AZ55 Galvalume roof panels. Olympia is recognized as one of the industry
More informationBrava Spanish Tile. Installation Manual. Brava Roof Tile Phone: Fax:
Brava Spanish Tile Installation Manual Brava Roof Tile Phone: 319-338-5706 Fax: 319-343-1038 www.bravarooftile.com This document includes the recommended and suggested installation procedures for Brava
More informationROOFING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION
ROOFING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION Revised September 14 The General Trade Knowledge portion of the examination is administered daily in Computer Based Testing (CBT)
More informationMetal Roof Panels
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 074113 - Metal
More informationGENERAL SPECIFICATIONS
GENERAL SPECIFICATIONS 1. GENERAL 1.1 Scope 1.1.1 These specifications delineate the design criteria, material quality, and fabrication processes used in metal building systems designed, manufactured and
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ROOFING AND SIDING PANELS REPORT HOLDER: KINGSPAN INSULATED PANELS, INC.
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1143 Reissued 04/2017 This report is subject to renewal 04/2018. DIVISION: 07 00 00 THERMAL
More informationRS32 Multi-Section Skylight System under/over seam clip double diverter
INSTALLATION INSTRUCTIONS RS32-x RS32 Multi-Section Skylight System under/over seam clip double diverter www.rnssales.com sales@rnssales.com 805.375.3980 Fax 805.375.3981 SKYLIGHT ACRYLIC skyline series
More informationRoof Replacement. Notes: T-1 (Title Sheet) Roof Key Plan Russell House Student Union 1400 Greene Street Columbia, South Carolina 29208
Notes: Drawing Index T-1 Title R-1 Roof Plan - Existing Conditions R-2 Roof Plan - New D-1 Roof Details D-2 Roof Details D-3 Roof Details M-1 Mechanical - Roof Plan M-2 Mechanical - Details Roof Key Plan
More informationThe Olympia Difference
The Olympia Difference Valued Customer, Thank you for choosing Olympia Steel Buildings as the solution to your building needs. You can be confident that the Olympia team of professionals will provide you
More informationCATALOG STEEL BUILDING
CATALOG STEEL BUILDING 2 Why Metal Depots 9 Carports 14 Windows TABLE OF CONTENTS 2 Build Your Dream 10 Light-Gauge Structural 14 Roll-Up Doors 3 Handyman Series 11 Light-Transmitting Panels 15 Sealants
More informationSECTION MANUFACTURED ROOF AND WALL PANELS SECTION SHEET METAL ROOFING
SPECIFICATIONS www.englertinc.com MANUFACTURER ENGLERT, INC. 1200 Amboy Avenue Perth Amboy, New Jersey 08861 Tel: (732) 826-8614 Fax: (732) 826-8865 PART I GENERAL 1.01 WORK INCLUDED SECTION 07410 - MANUFACTURED
More informationInstallation Instructions
Installation Instructions RainTight Decks www.raintightdecks.com Underdeck Installation Instructions Table of Contents Page 3 Page 4 Page 5 Page 6 Page 7 Tools Required Introduction and How the system
More informationJackson Plant: 308 Alabama Blvd. Jackson, GA (800) /Fax: (800)
Jackson Plant: 308 Alabama Blvd. Jackson, GA 30233 (800)884-4484/Fax: (800)765-4484 Idabel Plant: Rt. 3 Idabel, OK 74745 (800)926-8509/Fax: (800)289-6007 Headquarters: Lancaster Plant: 3449 Hempland Road
More informationDesigner Series. Technical/Installation Information
Technical/Installation Information IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE Designer Series WALL SYSTEM. MBCI MUST BE FOLLOWED AS A MINIMUM TO INSURE APPROPRIATE
More informationCentral Snap. Product Guide. 16" or 18" COVERAGE 1¾" HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES
Central Snap Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 1¾" 16" or 18" COVERAGE Copyright 2018, Central States Manufacturing, Inc., All Rights Reserved. D C GUID_PROD_CENTRALSNAP_180201.1
More informationGuardian. Standing Seam Roof System. Manual THIS MANUAL REPLACES ALL PREVIOUS MANUALS EFFECTIVE JANUARY 1, 2006 / JC & JEN
Guardian Standing Seam Roof System Erection Manual THIS MANUAL REPLACES ALL PREVIOUS MANUALS / JC & JEN IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE GUARDIAN
More informationPROJECT STATEMENT OF WORK ROOFING PHASE AREA CAMP BLANDING JOINT TRAINING SITE STARKE, FL 32091
PROJECT 214020 STATEMENT OF WORK ROOFING PHASE 2 4800 AREA CAMP BLANDING JOINT TRAINING SITE STARKE, FL 32091 1. SCOPE: Camp Blanding Joint Training Site requires the services of a Florida Licensed General
More informationROOF ICE MELT RIM SYSTEM
ROOF ICE MELT RIM SYSTEM This design guide provides the information necessary to help our design engineers design your Raychem Roof Ice Melt (RIM) system. For other applications or for design assistance,
More informationMETAL BUILDING SYSTEM SPECIFICATIONS
METAL BUILDING SYSTEM SPECIFICATIONS 1. GENERAL 1.1. SCOPE 1.1.1. These specifications apply to metal buildings systems as engineered, designed, and fabricated by Tyler Building Systems, L.P. ( Tyler ).
More informationTOPCOAT Product Catalog
TOPCOAT Product Catalog (TOPGN235) Updated: 7/14 gaf.com TOPCOAT L I Q U I D-APPL IED R O O F I N G gaf.com Energy-Saving Liquid-Applied Roofing Solutions! FEWER COATS FEWER GALLONS FEWER LABOR HOURS BIGGER
More informationAlply CLASSIC WALL Architectural Insulated Panel Wall System
SECTION 07 42 13 INSULATED METAL WALL PANELS ALPLY Insulated Panels Alply CLASSIC WALL Architectural Insulated Panel Wall System PART 1 / GENERAL 1.1 SYSTEM DESCRIPTION A. Smooth, non-embossed steel, insulated
More informationHip Detail. Construction Details. KS1000 LP/CR Roof. Hip Detail STANDARD ENHANCED ENHANCED STANDARD. Mineral fibre insulation
Hip Detail Hip Detail STANDARD Mineral fibre insulation ENHANCED Hip flashing with 150mm sealed butt straps Panels site cut to suit rake angle Apex dam (Ref: LP1/A) Rake cut profiled filler sealed top
More informationOur buildings are manufactured entirely in the United States with a 25 year steel mill backed guarantee.
Our buildings are manufactured entirely in the United States with a 25 year steel mill backed guarantee. Olympia is recognized as one of the industry leaders in providing superior quality, service, and
More informationARCHITECTURAL DESIGN GUIDE
CFR INSULATED METAL ROOF PANEL ARCHITECTURAL DESIGN GUIDE PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY CONTENTS INTRODUCTION........................................................2
More informationSECTION METAL BUILDING SYSTEMS
SECTION 13 3419 PART 1 GENERAL 1.01 SECTION INCLUDES A. Manufacturer-engineered, shop-fabricated structural steel building frame. B. Insulated Metal wall and roof panels including gutters and downspouts.
More informationPrestige Roofing System
Prestige Roofing System Installation Manual 3449 Hempland Road Lancaster, PA 17601 (800) 477-2741 308 Alabama Blvd. Jackson, GA 30233 (800) 884-4484 World Wide Web: www.fabral.com E-Mail: architecturalsystems@fabral.com
More informationRPR Insul-Mate Sheet and Roll Jacketing
RPR Insul-Mate Sheet and Roll Jacketing ALUMINUM PRODUCTS Rolled Jacketing Sheeting (Flat and Corrugated) Cut to Length Cut & Rolled Width/Length: 36 and 48 wide 100, 50 and cut to length (thicker gauges
More informationSenergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board
Senergy Platinum CI Stucco Typical details for an impact resistant cement plaster stucco system featuring Neopor GPS Plus Rigid Insulation Board NOTES Senergy Platinum CI Stucco Typical details for an
More informationMS-100 MS-150. MS SERIES Flashing and Details Guide. MS150 Flashing and Details Guide. MS200 Flashings and Details Guide
Taylor Metal Products - Phone: 503-581-8338 or 800-574-1388 - Fax: 503-581-6877 - www.taylormetal.com MS200 Flashings and Details Guide MS150 MS SERIES MS-100 MS-150 MS-100 MECHANICALLY SEAMED The MS-100
More informationFW-120. Technical/Installation Information
Technical/Installation Information IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE S. THE MANUFACTURER DETAILS MUST BE FOLLOWED AS A MINIMUM TO INSURE APPROPRIATE
More information