Central Seam Plus. Central-Loc

Transcription

1 Central Seam Plus Central-Loc Product Guide HELPFUL INFORMATION ON PANELS, TRIMS, GUTTERS AND ACCESSORIES 3" 3" " or 18" COVERAGE " or 18" COVERAGE Central Seam Plus Field seamed Central-Loc Snaps together Copyright 2018 by Central States Manufacturing, Inc. D C GUID_PROD_CENTRALLOC-SEAM_180201

2

3 The men and women at Central States Manufacturing, Inc. would like to welcome you. OUR MISSION Central States Manufacturing, Inc. is a 100% employee-owned company devoted to the personal growth and well-being of our owners. We are dedicated to increasing the value of our company by making Raving Fans of our customers through exceeding their expectations, being easy to do business with, demonstrating excellence in all aspects of our business and being committed to improving their business. It is our promise to maintain honesty and integrity with everyone our lives may touch. With thanksgiving for the blessings we have been given, we are committed to serving the communities where we live and work by giving back a portion of our time, talents and profits. Effective 02/2018 Information subject to change 3

4 INDEX Information in the catalog may vary by plant location. Please call your salesperson to verify product availability. Delivery / Storage & Handling / Cutting...05 Central-Loc Information...06 Allowable Live Loads...07 Engineering UL Ratings...09 Central Seam Plus Information...10 Allowable Live Loads...11 Engineering UL Ratings...13 Square Conversions Trim Gutters...21 Eave Plates...22 Clips...23 Rake Support... Accessories Notice: The application and detail drawings in this manual are strictly for illustration purposes and may not be applicable to all building designs or product installations. Projects should conform to local building codes. Central States Manufacturing is not responsible for the performance of the material if it is not installed correctly. Information contained in this booklet was in effect at the time of publication and is subject to change without notice. 4 Effective 02/2018 Information subject to change

5 DELIVERY Additional freight charges may apply. Deliveries will be made using a tractor/trailer weighing approximately 80,000 lbs. It is imperative that all delivery locations be accessible by a vehicle of this size. Our drivers have the authority to refuse delivery to any location they see as unsafe or inaccessible. The customer is responsible for any charges incurred if truck is detained for any reason. RECEIVING & HANDLING The customer is responsible for unloading all trucks. Any damage that occurs at this point is the customer s responsibility. There must be either equipment or at least 3 people to unload truck. STORAGE AND HANDLING Galvalume steel sheets have a good service life when exposed to normal weather conditions. However, to protect the appearance of panels and trims from damage, there are a few simple precautions that can be taken. The steel sheets are subject to stain when water sits upon, or becomes trapped between, the sheets. If the Galvalume sheets are to be stored for any period of time, they should be stored only in a dry place, preferably under a roof. Stand panels on end and fan them out at the bottom to provide air circulation and moisture run off. If space does not allow this, the panels should be separated, blocked off of the floor at least 12 inches to allow air flow, and stored at an incline to encourage drainage. The panels should then be covered, yet still have good air flow through the sheets to prevent condensation. Do not use a plastic cover, as this may cause the panels to sweat or condensation to occur. Failure to follow these steps may result in wet storage stains and premature rusting. The manufacturer s warranty will be void at this time, and the manufacturer will not be responsible. When unloading panels, extreme caution must be employed. Care needs to be used when unloading panels with a forklift. Panel edges and under paint may become damaged if the forklift driver does not use caution. Once in the job site, care must be taken in order to protect the painted surface. When unbundling the panels, never drag them across the surface of one another. This may cause scratches across the underneath panels. It is recommended that the panels be rolled off the top of the bundle to prevent scratching. Never lift panels by the ends, instead lift the panels longitudinally and carry vertically. Panel edges are very sharp, therefore, safety equipment should be worn by all workers handling the material. Panels are bundled together, which causes them to curl up. This enhances the strength of the bundles. Panels bundled in this manner may be handled by a forklift in lengths of 30'. The forklift should have at least 5' between forks. Lengths in excess of 30' must be lifted utilizing a spreader bar. Special care must be given during handling to avoid damage to the locking edge of the panels. CUTTING A portable field shear is the ideal method for cutting panels. Nibblers or a power shear may also be used. Although we do not recommend it, if you decide to cut with a saw, it is very important that the panels be turned up down during cutting so that hot shavings do not come in contact with the painted surface. Make sure all adjacent panels are covered so that shavings are not imbedded in these panels. If metal shavings become imbedded in the paint surface, they will quickly rust. To avoid this, panels should be thoroughly wiped of all filings on both s of the panel. Failure to comply with the recommended cutting procedures releases the manufacturer of any responsibility. DRILLING Panels should not be drilled while stacked. This will cause shavings that will become imbedded in the paint surface. Shavings created by saw cutting or drilling may cause the panel to rust and will void warranties in affected areas. CAUTION Effective 02/2018 Information subject to change 5

6 CENTRAL-LOC Central-Loc is a snap-together trapezoidal roofing system available in " standard coverage and an optional 18" panel. Its floating clips allow for thermal roof expansion and contraction during extreme temperature changes. A factory applied sealant insures a weather-tight and secure lap. This panel can be used for both new construction and retrofit. Central-Loc is manufactured from Galvalume which offers two to four times the corrosion resistance of galvanized steel. Weather-tight 3" high standing seam with concealed clips and fasteners Factory applied hot melt seam and clip sealant Large selection of clip sizes to accommodate various types of construction and insulation thicknesses Panels can be pre-punched, combined with self-engaging backup plates for ease of installation. No field seaming Reversible end-for-end panels so each of the roof can be installed simultaneously. Panels are factory notched for ease of installation at the endlap Comprehensive step-by-step erection manuals come with each Standing Seam order. 3" " or 18" COVERAGE 6 Effective 02/2018 Information subject to change

7 Coverage Width - Minimum Slope - Panel Attachment - Panel Substrate - " with minor ribs - 6 pre-punched holes or no punching 18" with minor ribs - 5 pre-punched holes or no punching 1/4:12 Gauge - Finishes - Panel Coating - Low, high (fixed or floating), or utility (no insulation clearance) Galvalume Smooth with minor ribs Fluropon or arcylic Galvalume CENTRAL-LOC Note: Oil canning in the flat area of the panels is common to the industry and does not affect the integrity of the panel. Therefore, oil canning is not a reason for rejection. CENTRAL-LOC - " COVERAGE Gauge (Fy = 50 KSI) - All loads in pounds per square foot. ALLOWABLE S SPAN LOAD Span (ft) TYPE TYPE SPAN SPAN SPAN SPAN CENTRAL-LOC - 18" COVERAGE Gauge (Fy = 50 KSI) - All loads in pounds per square foot. SPAN LOAD Span (ft) TYPE TYPE SPAN SPAN SPAN SPAN Allowable loads are based on uniform span lengths and panel yield strength (Fy) of 50 ksi. is an allowable live load limited by shear & bending or web crippling. Above loads conr a maximum deflection ratio of L/180. Weight of the panel has not been deducted from allowable loads. Contact CSMI for wind uplift values. Effective 02/2018 Information subject to change 7

8 CENTRAL-LOC ENGINEERING IMPORTANT - READ THIS FIRST Application and design details are for illustration purposes only, and may not be appropriate for all environmental conditions or building designs. Projects should be engineered to conform to applicable building codes, regulations, and accepted industry practices. CAUTION Central-Loc is a snap together system. Use of a mechanical seaming tool on the Central-Loc system will void all warranties. In order to design, quote or order a Central-Loc roof system, you must determine which system you need, based on building width and insulation requirements. LOW FIXED SYSTEM Double slope buildings 200' wide or less and single slope buildings 100' wide or less, with or without a 3/8" thermal spacer. See Insulation/Thermal Spacer Selection Chart below. HIGH FIXED SYSTEM Double slope buildings 200' wide or less and single slope buildings 100' wide or less, with 3/8", 5/8", or 1" thermal spacers. See Insulation/Thermal Spacer Selection Chart below. Fixed systems utilize fixed clips that do not allow the roof panels to float on the substructure. For this reason, use fixed systems only on pre-engineered metal buildings with purlins, subject to the building width restrictions outlined above. Do not use fixed systems on buildings with bar joist construction, wood decks or metal decks. LOW FLOATING SYSTEM Double slope buildings over 200' wide or single slope buildings over 150' wide, with or without 3/8" thermal spacer. See Insulation/Thermal Spacer Selection Chart below. HIGH FLOATING SYSTEM Double slope buildings over 200' wide or single slope buildings over 150' wide, with 3/8", 5/8" or 1" thermal spacer. See Insulation/Thermal Spacer Selection Chart below. Thermal calculations should be performed for each project to ensure that the thermal movement of the roof is not greater than the floating clip s capacity. Various densities of blanket insulation may affect the installation and or the appearance of a metal roof system. The installer is responsible for selecting the proper clip and thermal spacer for their conditions. INSULATION/THERMAL SPACER SELECTION CHART Insulation Thickness Low System High System No Insulation 3/8" Thermal Spacer High System Not Recommended 3" Insulation Thermal Spacer Not Recommended 1" Thermal Spacer Recommended 4" Insulation Thermal Spacer Not Recommended 5/8" Thermal Spacer Recommended 6" Insulation Low System Not Recommended 3/8" Thermal Spacer Recommended NOTES: 1. As with all standing seam roof systems, sound attenuation (example: blanket insulation) is required between the panel and the substructure to prevent roof rumble during windy conditions. Some composite roof systems may require additional acoustical conration to ensure that thermal vibration noises are isolated from the building interior. Contact your architect and/or engineer for proper acoustical design. 2. The following are examples of conditions that may cause condensation: (A) Projects where out winter temperatures below 40 F are anticipated and where average winter interior relative humidity of 45% or greater is expected. (B) Building usages with high humidity interiors, such as indoor swimming pools, textile manufacturing operations, food paper or other wet-process industrial plants. (C) Construction elements that may release moisture after the roof is installed, such as interior concrete and masonry, plaster finishes and fuel burning heaters. Manufacturer is not responsible for determining if condensation will be an issue on any particular application. THERMAL SPACER DISCLAIMER The above thermal spacer chart is intended to be used as a general guideline only. Because of the various densities of insulation currently available, the manufacturer cannot guarantee that this chart will be accurate in all situations. Further, the manufacturer does not specifically require that the roofing contractor use thermal spacers with its Central-Loc roof system. However, please review the following information: Although the manufacturer does not require a thermal spacer, the architect or building owner may. In certain environments, the compression of the fiberglass insulation, without a thermal spacer, may create a thermal break which can cause condensation to form on the purlins/joists. On uninsulated buildings, eliminating the thermal spacer: (1) may cause roof rumble and (2) you may encounter problems holding panel module. When a high clip is used without a thermal spacer: (1) you may encounter problems holding panel module and (2) foot traffic on the panel ribs may result in bent clips. Using a low clip with too much insulation or too thick a thermal spacer: (1) may cause purlin read (2) may cause difficulty in properly installing the panel laps, and (3) you may encounter problems holding panel module. 8 Effective 02/2018 Information subject to change

9 UNDERWRITERS LABORATORIES APPROVAL CENTRAL-LOC Construction number Panel Width (Inches) Gauge Clip Type Clip Spacing Substrate UL-2218 Impact Resistance UL-263 Fire Rating UL-580 Rating B A B min. min. min. min. min. min. min. min. min. min. 26 min. B A A B C A B A B B B 5'-0" 5'-0" 5'-0" 5'-0" 5'-0" 5'-0" 5'-0 1/4" 5'-0 1/4" 5'-0" 5'-0 1/4" 5'-0" Open Framing Composite Open Framing Open Framing Plywood Composite Open Framing Open Framing Composite Composite Plywood NOTES: 1. Wind uplift test procedures are in accordance with Underwriters Laboratories Standard UL-580 under Tests For Uplift Resistance of Roof Assemblies. 2. A detailed installation method is available for each Construction Number above and can be found in the UL Roofing Materials and Systems Directory or at The panels must be installed in a certain manner to achieve the published results. 3. The panel qualifies for a fire rating in compliance with Underwriters Laboratories Standard UL The panel system is listed under the following Fire Resistance Design Numbers: P2, P225, P227, P230, P233, P237, P265, P268, P508, P510, P512, P701, P711, P715, P717, P720, P722, P7, P726, P731, P734, P736, P801, P803, P814, P815, P819, P821, P823. Refer to the UL Fire Resistance Directory for specific construction methods and hourly ratings. 5. Central-Loc panels carry a rating under UL-2218 Test Standard for Impact Resistance. Clip Type: A (Fixed or Floating); B (Floating); C (Utility). ICBO APPROVAL The ICBO Evaluation Service, Inc., has approved the Central-Loc roofing system details, engineering, calculations, computer printouts and product data. This information has been found to comply with 1997 UBC Code and is listed in evaluation report number ER A copy of this report is available on request. FLORIDA BUILDING CODE PRODUCT APPROVAL Roofing System details and engineering load tables have been examined by the State of Florida and comply with Florida Building Code Product Approval Number FL Effective 02/2018 Information subject to change 9

10 CENTRAL SEAM PLUS Central Seam Plus is a field seamed trapezoidal roofing system available in " standard coverage and an optional 18" panel. Its floating clips allow for thermal roof expansion and contraction during extreme temperature changes. A factory applied sealant insures a weather-tight and secure lap. This panel can be used for both new construction and retrofit. Central Seam Plus is manufactured from Galvalume which offers two to four times the corrosion resistance of galvanized steel. Central Seam Plus begins and ends in the high, reducing the risk of leakage at the rake that can occur when finishing in the low. Factory applied hot melt seam and clip sealant Large selection of clip sizes to accommodate various types of construction and insulation thicknesses A standard clip allows for a total of two inches of thermal movement and is constructed from 14 gauge material. The clip provides a 3/8" or 1 3/8" clearance at the purlin to reduce water ponding on low pitch roofs. Constructed from 12 gauge material, this clip is an integral part of maintaining panel module. Panels can be pre-punched, combined with self-engaging backup plates for ease of installation. Reversible end-for-end panels so each of the roof can be installed simultaneously. Panels are factory notched for ease of installation at the endlap Comprehensive step-by-step erection manuals come with each Standing Seam order. 3" " or 18" COVERAGE 10 Effective 02/2018 Information subject to change

11 Coverage Width - Minimum Slope - Panel Attachment - Panel Substrate - " with minor ribs - 6 pre-punched holes or no punching 18" with minor ribs - 5 pre-punched holes or no punching 1/4:12 Gauge - Finishes - Panel Coating - Low or high (floating) Galvalume Smooth with minor ribs Fluropon or arcylic Galvalume Note: Oil canning in the flat area of the panels is common to the industry and does not affect the integrity of the panel. Therefore, oil canning is not a reason for rejection. CENTRAL SEAM PLUS - " COVERAGE Gauge (Fy = 50 KSI) - All loads in pounds per square foot. CENTRAL SEAM PLUS Seamer rental information available on our website ALLOWABLE S SPAN LOAD Span (ft) TYPE TYPE SPAN SPAN SPAN SPAN CENTRAL SEAM PLUS - 18" COVERAGE Gauge (Fy = 50 KSI) - All loads in pounds per square foot. SPAN LOAD Span (ft) TYPE TYPE SPAN SPAN SPAN SPAN Allowable loads are based on uniform span lengths. is limited by bending, shear, combined shear & bending, or web crippling. Above loads conr a maximum deflection ratio of L/180. Panel weight has not been deducted from allowable loads. The use of any field seaming machine other than those provided by the manufacturer will void all engineering data. Contact CSMI for wind uplift values. Effective 02/2018 Information subject to change 11

12 CENTRAL SEAM PLUS ENGINEERING IMPORTANT - READ THIS FIRST Application and design details are for illustration purposes only, and may not be appropriate for all environmental conditions or building designs. Projects should be engineered to conform to applicable building codes, regulations, and accepted industry practices. CAUTION The use of any field seaming machine other than that rented from our approved seamer listed on our website may damage the panels, void all warranties and will void all engineering data. In order to design, quote or order a Central Seam Plus roof system, you must determine which system you need, based on building width and insulation requirements. LOW FLOATING SYSTEM Double slope buildings over 200' wide or single slope buildings over 100' wide, with or without 3/8" thermal spacer. See Insulation/Thermal Spacer Selection Chart below. HIGH FLOATING SYSTEM Double slope buildings over 200' wide or single slope buildings over 100' wide, with 3/8", 5/8" or 1" thermal spacer. See Insulation/Thermal Spacer Selection Chart below. Thermal calculations should be performed for each project to ensure that the thermal movement of the roof is not greater than the floating clip s capacity. Various densities of blanket insulation may affect the installation and or the appearance of a metal roof system. The installer is responsible for selecting the proper clip and thermal spacer for their conditions. INSULATION/THERMAL SPACER SELECTION CHART Insulation Thickness Low System High System No Insulation 3/8" Thermal Spacer High System Not Recommended 3" Insulation Thermal Spacer Not Recommended 1" Thermal Spacer Recommended 4" Insulation Thermal Spacer Not Recommended 5/8" Thermal Spacer Recommended 6" Insulation Low System Not Recommended 3/8" Thermal Spacer Recommended 8" Insulation Low System Not Recommended Thermal Spacer Not Recommended 10" Insulation Low System Not Recommended High System Not Recommended 12" Insulation Low System Not Recommended High System Not Recommended NOTES: 1. As with all standing seam roof systems, sound attenuation (example: blanket insulation) is required between the panel and the substructure to prevent roof rumble during windy conditions. Some composite roof systems may require additional acoustical conration to ensure that thermal vibration noises are isolated from the building interior. Contact your architect and/or engineer for proper acoustical design. 2. The following are examples of conditions that may cause condensation: (A) Projects where out winter temperatures below 40 F are anticipated and where average winter interior relative humidity of 45% or greater is expected. (B) Building usages with high humidity interiors, such as indoor swimming pools, textile manufacturing operations, food paper or other wet-process industrial plants. (C) Construction elements that may release moisture after the roof is installed, such as interior concrete and masonry, plaster finishes and fuel burning heaters. Manufacturer is not responsible for determining if condensation will be an issue on any particular application. THERMAL SPACER DISCLAIMER The above thermal spacer chart is intended to be used as a general guideline only. Because of the various densities of insulation currently available, the manufacturer cannot guarantee that this chart will be accurate in all situations. Further, the manufacturer does not specifically require that the roofing contractor use thermal spacers with its Central Seam Plus roof system. However, please review the following information: Although the manufacturer does not require a thermal spacer, the architect or building owner may. In certain environments, the compression of the fiberglass insulation, without a thermal spacer, may create a thermal break which can cause condensation to form on the purlins/joists. On uninsulated buildings, eliminating the thermal spacer: (1) may cause roof rumble and (2) you may encounter problems holding panel module. When a high clip is used without a thermal spacer: (1) you may encounter problems holding panel module and (2) foot traffic on the panel ribs may result in bent clips. Using a low clip with too much insulation or too thick a thermal spacer: (1) may cause purlin read (2) may cause difficulty in properly installing the panel laps, and (3) you may encounter problems holding panel module. 12 Effective 02/2018 Information subject to change

13 UNDERWRITERS LABORATORIES APPROVAL CENTRAL SEAM PLUS Construction number C A Panel Width (Inches) Gauge min. min. min. min. min. min. min. min. Clip Type B B B B B B B B Clip Spacing 5'-0 5'-0" 5'-0" 5'-0" 5'-0" 5'-0 1/4" 5'-0" 5'-0" Substrate Open Framing Composite Open Framing Composite Open Framing Open Framing Composite Composite UL-2218 Impact Resistance UL-263 Fire Rating UL-580 Rating Clip Type: A (Fixed or Floating); B (Floating); C (Utility). NOTES: 1. Test procedures are in accordance with Underwriters Laboratories Standard UL-580 under Tests for Uplift Resistance of Roof Assemblies. 2. A detailed installation method is available for each Construction Number above and can be found in the UL Roofing Materials and Systems Directory. The panels must be installed in a certain manner to achieve the published results when installed over a substructure. 3. The panel qualifies for a fire rating in compliance with Underwriters Laboratories Standard UL The panel system is listed under the following Fire Resistance Design Numbers: P2, P225, P227, P230, P233, P237, P265, P268, P508, P510, P512, P701, P711, P715, P717, P720, P722, P7, P726, P731, P734, P736, P801, P803, P814, P815, P819, P821, and P823. Refer to the UL Fire Resistance Directory for specific construction methods and hourly ratings. 5. Construction Number 450 includes the use of a domed skylight. ICBO APPROVAL The ICBO Evaluation Service, Inc., has approved the Central Seam Plus roofing system details, engineering, calculations, computer printouts and product data. This information has been found to comply with 1997 UBC Code and is listed in evaluation report number ER A copy of this report is available on request. FLORIDA BUILDING CODE PRODUCT APPROVAL Roofing System details and engineering load tables have been examined by the State of Florida and comply with Florida Building Code Product Approval Number FL Effective 02/2018 Information subject to change 13

14 Effective 02/2018 Information subject to change 14 FEET " " " " " " " " " " " " " COVERAGE SQUARE FEET PER PANEL

15 Effective 02/2018 Information subject to change 15 FEET " " " " " " " " " " " " " COVERAGE SQUARE FEET PER PANEL

16 TRIMS GA. TRIMS ARE FLUROPON PAINT SYSTEM. 26 GA. TRIMS ARE SMP PAINT SYSTEM. Color matching between Fluropon -coated panels and SMP trim is not exact and will fade at different rates. For best match, use ga. Fluropon trims. All angles are 90 or 45 unless otherwise noted. PART # GAUGE DIM. "A" LENGTH GIRTH ROOF SLOPE RIDGE CAP FLOATING SS200RCP102(color) 3 1/2" 10'2" 15.5" 1/4-2:12 2 1/2 A 120 SS202RCP102(color) 4 1/2" 10'2" 17.5" 2 9/16-4:12 SS213RCP102(color) 6 1/2" 10'2" 21.5" 1/4-2:12 SSRCP102(color) 7 1/2" 10'2" 23.5" 2 9/16-4: /4 SS200(color) /2" 10'2" 15.5" 1/4-2:12 SS202(color) /2" 10'2" 17.5" 2 9/16-4:12 SS213(color) /2" 10'2" 21.5" 1/4-2:12 SS214(color) /2" 10'2" 23.5" 2 9/16-4:12 Specify roof slope. Use with ventilator - " peak purlin spacing. RIDGE END CAP A SS201RCE(color) 3 1/2" use with SS200RCP102(color) SS203RCE(color) 4 1/2" use with SS202RCP102(color) SS896RCE(color) 6 1/2" use with SS213RCP102(color) SSRCE(color) 7 1/2" use with SSRCP102(color) SS201(color) /2" use with SS200 SS203(color) /2" use with SS202 SS896(color) /2" use with SS213 SS897(color) /2" use with SS214 Specify roof slope. SCULPTURED EAVE TRIM SSEA102(color) n/a 10'2" 14.25" n/a SSEA204(color) n/a 20'4" 14.25" n/a SS250(color) 26 n/a 10'2" 14.25" n/a SS251(color) 26 n/a 20'4" 14.25" n/a SCULPTURED HIGH SIDE EAVE TRIM SSHI102-2(color) 2" 10'2" " 1/4-1 3/4:12 Specify roof slope. Specify open hem when using SS338 Continuous Cleat. SSHI102>2(color) 3 11/16" 10'2" " 1 3/4-4:12 SSHI204-2(color) 2" 20'4" " 1/4-1 3/4:12 SSHI204>2(color) 3 11/16" 20'4" " 1 3/4-4:12 A SS265A(color) 26 2" 10'2" " 1/4-1 3/4:12 SS265B(color) /16" 10'2" " 1 3/4-4:12 SS266A(color) 26 2" 20'4" " 1/4-1 3/4:12 SS266B(color) /16" 20'4" " 1 3/4-4:12 Specify roof slope. 16 Effective 02/2018 Information subject to change

17 GA. TRIMS ARE FLUROPON PAINT SYSTEM. 26 GA. TRIMS ARE SMP PAINT SYSTEM. TRIMS Color matching between Fluropon -coated panels and SMP trim is not exact and will fade at different rates. For best match, use ga. Fluropon trims. All angles are 90 or 45 unless otherwise noted. SCULPTURED RAKE PART # GAUGE DIM. "A" LENGTH GIRTH ROOF SLOPE SSRA102(color) n/a 10'2" 19.25" n/a SSRA204(color) n/a 20'4" 19.25" n/a SS110(color) 26 n/a 10'2" 19.25" n/a SS111(color) 26 n/a 20'4" 19.25" n/a RAKE SLIDE SSRS102(color) n/a 10'2" 3" n/a SS115(color) 26 n/a 10'2" 3" n/a PARAPET HIGH SIDE EAVE FLASH - FLOATING 4 ¾ Specify pitch A 1 ¼ SS275EF102(color) 3.5" 10'2" 12.5" specify pitch SSEF102(color) 4.5" 10'2" 13.5" specify pitch SS " 10'2" 12.5" specify pitch SS " 10'2" 13.5" specify pitch ½ PARAPET RAKE FLASH 4 A 1 PARAPET RAKE CLEAT 1 SS285SF102(color) 3" 10'2" 8" n/a SSSF102(color) 5" 10'2" 10" n/a SSPRF102(color) 7" 10'2" 12" n/a SS " 10'2" 8" n/a SS " 10'2" 10" n/a SS " 10'2" 12" n/a SSPRC102(color).75" 10'2" 2.25" n/a SS290(color) 26.75" 10'2" 2.25" n/a ¾ Effective 02/2018 Information subject to change 17

18 TRIMS GA. TRIMS ARE FLUROPON PAINT SYSTEM. 26 GA. TRIMS ARE SMP PAINT SYSTEM. Color matching between Fluropon -coated panels and SMP trim is not exact and will fade at different rates. For best match, use ga. Fluropon trims. All angles are 90 or 45 unless otherwise noted. PART # GAUGE DIM. "A" LENGTH GIRTH ROOF SLOPE LOW VALLEY SSVAL102(color) n/a 10'2" 38" n/a 16 HIGH VALLEY 3 45 SSVAL204(color) n/a 20'4" 38" n/a SS700(color) 26 n/a 10'2" 38" n/a SS702(color) 26 n/a 20'4" 38" n/a Specify roof slope. SSHVAL102(color) n/a 10'2" 41.5" n/a SSHVAL204(color) n/a 20'4" 41.5" n/a SS712(color) 26 n/a 10'2" 41.5" n/a SS713(color) 26 n/a 20'4" 41.5" n/a Specify roof slope. ZEE CLOSURE 1 SSZEE102(color) n/a 10'2" 5" n/a 3 1 SS360(color) 26 n/a 10'2" 5" n/a Use at hip conditions. CONTINUOUS CLEAT 2 ½ 135 SSCC102(color) n/a 10'2" 3" n/a SS338(color) 26 n/a 10'2" 3" n/a ½ VARIABLE TERMINATION SSVT102(color) n/a 10'2" 10.25" n/a 9 SS117(color) 26 n/a 14'2" 10.25" n/a ¾ Effective 02/2018 Information subject to change

19 GA. TRIMS ARE FLUROPON PAINT SYSTEM. 26 GA. TRIMS ARE SMP PAINT SYSTEM. TRIMS Color matching between Fluropon -coated panels and SMP trim is not exact and will fade at different rates. For best match, use ga. Fluropon trims. All angles are 90 or 45 unless otherwise noted. BOX PANEL CAP TRIM PART # GAUGE DIM. "A" LENGTH GIRTH ROOF SLOPE SSPC102(color) n/a 10'2" 8.5" n/a SS272(color) 26 n/a 10'2" 8.5" n/a Specify roof slope. OFFSET PANEL CAP TRIM SSOPC102(color) n/a 10'2" 7.5" n/a SS271(color) 26 n/a 10'2" 7.5" n/a Specify roof slope. COUNTERFLASH ½ ½ SSCF102(color) n/a 10'2" 4.5" n/a SS341(color) 26 n/a 10'2" 4.5" n/a Specify roof slope. ALTERNATIVE COUNTERFLASH SSACF102(color) n/a 10'2" 4.5" n/a SS343(color) 26 n/a 10'2" 4.5" n/a FLAT SHEET FSK102(color) 10'2" 48.5" Additional pallet charge on orders of 10 or more. Order quantity under 10 sheet may be packaged in a roll. Effective 02/2018 Information subject to change 19

20 TRIMS GA. TRIMS ARE FLUROPON PAINT SYSTEM. 26 GA. TRIMS ARE SMP PAINT SYSTEM. Color matching between Fluropon -coated panels and SMP trim is not exact and will fade at different rates. For best match, use ga. Fluropon trims. All angles are 90 or 45 unless otherwise noted. FIXED PEAK BOX PART # GAUGE DIM. "A" LENGTH GIRTH ROOF SLOPE SSFXPB(color) n/a 1'6" 21" 1/2-6:12 SS121FXPB(color) n/a 2'6" 21" 1/2-3 3/4:12 SS120(color) 26 n/a 1'6" 21" 1/2-6:12 SS121(color) 26 n/a 2'6" 21" 1/2-3 3/4:12 Specify roof slope. Use with Central-Loc roof system. Use with SS110 or SS111 sculptured rake trim. FLOATING PEAK BOX SSPB102(color) n/a 2'1" 33.5" 1/4-6:12 SS126PB(color) n/a 2'6" 37.25" 1/4-6:12 SS125(color) 26 n/a 2'1" 33.5" 1/4-6:12 SS126(color) 26 n/a 2'6" 37.25" 1/4-6:12 Specify roof slope. Kit includes cinch angles and flexible membrane. Use with SS110 or SS111 sculptured rake trim. Check with sales representative for lead times. SCULPTURED RAKE END SSRE(color) n/a n/a n/a n/a SS134(color) 26 n/a n/a n/a n/a Use with SS110 sculptured rake trim. Specify left or right. OUTSIDE CORNER BOX SSOCB(color) n/a 18" 16" n/a SS230(color) 26 n/a 18" 16" n/a Specify roof slope. INSIDE CORNER BOX SSICB(color) SS231(color) 26 Specify roof slope. 20 Effective 02/2018 Information subject to change

21 GA. TRIMS ARE FLUROPON PAINT SYSTEM. 26 GA. TRIMS ARE SMP PAINT SYSTEM. GUTTERS Color matching between Fluropon -coated panels and SMP trim is not exact and will fade at different rates. For best match, use ga. Fluropon trims. All angles are 90 or 45 unless otherwise noted. SCULPTURED GUTTER PART # GAUGE LENGTH GIRTH ROOF SLOPE 6 SSGU102(color) 10'2" 23 13/16" 1/4-4:12 SSGU204(color) 20'4" 23 13/16" 1/4-4:12 SS0A(color) 26 10'2" 23 13/16" 1/4-4:12 SS1A(color) 26 20'4" 23 13/16" 1/4-4:12 Specify roof slope. Use in installations where eave plates are not used. DOWNSPOUT W/O KICKOUT GIRTH 16" PART # GAUGE LENGTH PART # GAUGE LENGTH CSLDS102(color) 10'2" CSLDS122(color) 12'2" CSLDS142(color) 14'2" CSLDS162(color) 16'2" CSLDS182(color) 18'2" CSLDS204(color) 20'4" DS102(color) 26 10'2" DS122(color) 26 12'2" DS142(color) 26 14'2" DS162(color) 26 16'2" DS182(color) 26 18'2" DS204(color) 26 20'4" DOWNSPOUT WITH KICKOUT CSLDK102(color) 10'2" CSLDK122(color) 12'2" CSLDK142(color) 14'2" CSLDK162(color) 16'2" CSLDK182(color) 18'2" CSLDK204(color) 20'4" DK102(color) 26 10'2" DK122(color) 26 12'2" DK142(color) 26 14'2" DK162(color) 26 16'2" DK182(color) 26 18'2" DK204(color) 26 20'4" GUTTER END CAP SSGEN(color) GUTTER STRAP CL6 SS5(color) 26 specify roof slope. Left and right. 10 DOWNSPOUT OUTLET DSOUTLET(color) 26 specify pitch. DOWNSPOUT CONNECTOR CSLDSLVE(color) DSLVE(color) 26 1/2" turn downs DOWNSPOUT ELBOW CSLDSE45(color) DOWNSPOUT STRAP CSLDSS(color) DSE45(color) 26 DSE90(color) /2" DSS2(color) /4" 2" Effective 02/2018 Information subject to change 21

22 EAVE PLATES *Longer lead times may apply. EAVE PLATE - LOW 1 1/2 PART # FINISH GAUGE SIZE LENGTH WEIGHT CL7600 Red Oxide /2" x 3/8" x 1 1/2" 8'0" 7.75 lbs. 3/ /2 optional - use with low clips EAVE PLATE - HIGH 1 ½ CL7616 Red Oxide /2" x 1" x 1 1/2" 8'0" 7.75 lbs. 1 1 ½ FLOATING EAVE PLATE - LOW Mandatory - use with high clips. CL7617 Red Oxide /2" x 3/8" x 4 1/2" 8'0" lbs. Use at eave when attaching panels to substructure at mid-point. Use with 8 x 5 x 5 Eave Strut. FLOATING EAVE PLATE - HIGH CL7618 * Red Oxide /2" x 1" x 5 7/16" 8'0" lbs. Use at eave when attaching panels to substructure at mid-point. Use with 8 x 5 x 5 Eave Strut. 22 Effective 02/2018 Information subject to change

23 CLIPS *Longer lead times may apply. CLIP - LOW FIXED PART # SYSTEM GAUGE HEIGHT LENGTH WEIGHT CL200 Central-Loc n/a 3 3/8" n/a.13 lbs. Clip fasteners must be ordered separately. CLIP - HIGH FIXED CL204 Central-Loc n/a 4 3/8" n/a. lbs. Clip fasteners must be ordered separately. CLIP - UTILITY CL208 * Central-Loc n/a 3" n/a.12 lbs. Clip fasteners must be ordered separately. For applications that do not require 3/8" clearance provided by the low and high clips. For use over solid substrate only. CLIP - 2" LOW SLIDING CL2102 Central-Loc n/a 3 3/8" n/a.56 lbs. CSP2122 * Central Seam Plus n/a 3 3/8" n/a.56 lbs. CL2102 CSP2122 Clip fasteners must be ordered separately. 1 3/8" movement in each direction. Specify system. CLIP - 2" HIGH SLIDING CL2104 Central-Loc n/a 4 3/8" n/a.68 lbs. CSP21 Central Seam Plus n/a 4 3/8" n/a.68 lbs. CL2104 CSP21 Clip fasteners must be ordered separately. 1 3/8" movement in each direction. Specify system. Effective 02/2018 Information subject to change 23

24 RAKE SUPPORT *Longer lead times may apply. RAKE SUPPORT - LOW PART # FINISH GAUGE SIZE LENGTH WEIGHT CL7710 Red Oxide /8" x 2 1/2" 20'0" lbs. Use with low clips. RAKE SUPPORT - HIGH CL7720 Red Oxide /8" x 1 1/2" 20'0" lbs. Use with high clips. RAKE SUPPORT - UTILITY CL7722 * Red Oxide 14 3" x 2 7/8" 20'0" lbs. Use with utility clips. Effective 02/2018 Information subject to change

25 ACCESSORIES *Longer lead times may apply. BACK UP PLATE MODIFIED PART # FINISH GAUGE SIZE LENGTH WEIGHT CL7760 * Red Oxide 16 " 16'0" 2.45 lbs. CL7769 * Red Oxide 16 18" 16'0" 2.00 lbs. 1/8 OUTSIDE CLOSURE CL430(color) ".81 lbs. CL432(color) 18".65 lbs. closures will have longer lead time. METAL CLOSURE - INSIDE CL426(color) Galvalume 18 3/4".22 lbs. closures will have longer lead time. BEARING PLATE CL7500 Red Oxide 16 3/4".32 lbs Use with all clips. For use over ridged board installation. SPACER TOOL CL619 Aluminum n/a 26".20 lbs. For use with Central-Loc THERMAL SPACER PART # MATERIAL SIZE LENGTH QTY PER BOX BOX WEIGHT CL575 POLYSTYRENE 1" X 3" 23 7/8" LBS. CL576 POLYSTYRENE 5/8" X 3" 23 7/8" LBS. CL577 POLYSTYRENE 3/8" X 3" 23 7/8" LBS. Specify system Effective 02/2018 Information subject to change 25

26 ACCESSORIES FASTENER #1 1/4" - 14 X 1" Driller 5/16" Hex Washer Head w/ 5/8" O.D. Washer PART # HEAD SIZE TYPE #PER BAG 1FASTENER 5/16" Driller 250 Clip to purlin with up to 4" insulation thickness. Eave plate to eave strut. In closure to eave plate or eave strut. Rake support to purlin (fixed system only). FASTENER #1E 1/4" - 14 X 11/4" Long life driller 5/16" Hex Washer Head w/sealing Washer 1EFASTENER 5/16" Long Life Driller 250 Panel to eave plate or eave strut. Rake trim to roof panel. Out Closure Endlap FASTENER #1F 1/4" - 14 X 11/2" Driller 5/16" Hex Washer Head w/ 5/8" O.D. Washer 1FFASTENER 5/16" Driller 250 Clip to purlin with up to 4" insulation thickness. FASTENER #4 1/4" - 14 X 7/8" Long life lap TEK 5/16" Hex Washer Head w/sealing Washer 4FASTENER * 5/16" Long Life Lap TEK 250 Ridge and other flashing to out closure. Gutter to panel. Gutter to strap. Trim to trim connections. FASTENER #5 1/4" - 14 X 11/4" Shoulder TEK 5/16" Hex Washer Head 5FASTENER * 5/16" Shoulder TEK 250 Rake support to purlin. Floating eave plate to eave strut. FASTENER #7 1/4" - 20 X 11/4" Shoulder TEK 4 5/16" Hex Washer Head 7FASTENER * 5/16" Shoulder TEK 250 Rake support to bar joist. Floating eave plate to bar joist. 26 Effective 02/2018 Information subject to change

27 ACCESSORIES FASTENER #12 2/2" Quadrex Driller PART # HEAD SIZE TYPE #PER BAG 12FASTENER 2/2" Driller 250 Support plate to purlins at valley and hip conditions. Rake angle to purlins. FASTENER #14 1/8" x 0.337": Pop Rivet Stainless steel 14FASTENER n/a Pop Rivet 100 Gutter strap to snow gutter. FASTENER #14A 1/8" x 0.525": Pop Rivet Stainless steel 14AFASTENER n/a Pop Rivet 100 Snow gutter to eave plate. Out closure to back-up angle at hip condition. POP RIVET POP(color) 3/16" Pop Rivet 100 FOR FLASHING JOINTS TAPE SEALER CL512A PART # TYPE WIDTH THICKNESS LENGTH #PER CARTON CARTON WT. CL512A Minor Rib 1 3/8" 7/32" 4" 144pc lbs CL502A Triple Bead 2 1/2" 3/16" 20' 6 rolls 23.0 lbs CL504A Tri-Bead 7/8" 3/16" 26' 8 rolls 20.0 lbs CL502A Use to fill any voids at the minor ribs of panel for eave and valley conditions. Sold by carton only. CL504A SEALANT PART # TYPE COLOR TUBE SIZE #PER CARTON CARTON WT. GEOC Tripolymer Clear 10.3 oz..85 lbs GEOG Tripolymer Gray 10.3 oz..85 lbs GEOW Tripolymer White 10.3 oz..85 lbs MRS(color) call for colors 10.3 oz. MRSCLEAR clear 10.3 oz. Effective 02/2018 Information subject to change 27

28