Technical Specifications

Transcription

1

2 Technical Drawing not currently available for this sign type P-CS-01 Campus Signature A Prominent external location to be negotiated with and approved by Property Unit

3

4 P-CM-01 Campus Map Type A Wall Mounted Frutiger Prominent external location to be negotiated with and approved by Property Unit Fixed to A-Frame or wall using appropriate hidden fittings by negotiation with Property Unit

5 3mm mild steel plates seam welded at edges and paint finished Reflex Blue 3mm natural anodised aluminium face panels, pin fixed proud 1 diam.nominal bore CHS welded to internal cleats Logo-Cast Colour Deep Blue (050) to match reflex blue Anodised Aluminium P-CM-05 Campus Map Type B Bollard Frutiger At key/prominent campus entry points, exact location to be negotiated with and approved by Property Unit Transfer facing. City West: Dulux RMA Gold UniSA special colour used for backing of Bollard sign. All other campuses use Reflex blue for backing of sign.

6

7 180mm 70mm 70mm 70mm City West, City East, Mawson Lakes, Underdale and Whyalla street signs: Galvanised poles and alloy sign clamps. The plates have a white vinyl background with reflex blue lettering and no logos. 180mm The sign itself can be purchased from Heatpac, and they also supply all the clamps and bolts to fit. 180mm 60mm 690mm 7 P-SS-01 Campus Street B Short Flag Frutiger. Size shall be dependant upon number of text lines on flag, i.e 1 line-70mm, 2 & 3 lines-. At key directional locations Destination: The street signs used to show the distance between Australia and other countries is to be similar to the Oslo sign. The countries shape in silver and a red dot for the capital. The country name in reflex blue frutiger medium and the distance in reflex blue frutiger small all centered.

8 180mm 60mm Campus Central Security 8 900mm 70mm City West, City East, Mawson Lakes, Underdale and Whyalla street signs: Dulux Notre Dame Gloss powder coated poles and sign clamps. The plates have a white vinyl backing with reflex blue lettering and logo using Cast Colour Deep Blue (050). Campus Central Cafeteria Library Building A Building C 70mm 70mm Magill street signs: Dulux Deep Brunswick Green powder coated poles and sign clamps. The plates have a light beige vinyl backing with bottle green lettering and logo using cast colour Dark Green (086). P-SS-05 Campus Street A Long Flag Frutiger. Size shall be dependant upon number of text lines on flag, i.e 1 line-70mm, 2 & 3 lines-. Upper/lower in all instances. At key directional locations Destination: The street signs used to show the distance between Australia and other countries is to be similar to the Oslo sign. The countries shape in silver and a red dot for the capital. The country name in reflex blue frutiger medium and the distance in reflex blue frutiger small all centered.

9

10 20mm Radius = 1600mm Height of panel = 1300mm 5 20mm C B D C A G H A B I D E F A B C D E F G H I 18 mm thick HMR, MDF panel 1800mm H x 700mm W finished in satin, automotive acrylic lacquer to match PMS mm thick, satin natural anodised aluminium panel 1400mm H x 6 W rolled to specified radius and adhesive fixed with V.H.B. double sided tape and silicon adhesive. 1.2mm thick zinc anneal panel, finished in metallic silver automotive acrylic lacquer, with radius to face and double edge returns to both vertical sides. Size 1300mm H x 5 W. Key hole fix to face of panel A. 16mm thick MDF split batton, screw & glue fixed to rear of panel A. 16mm thick MDF split batton, mechanically fixed to wall with suitable fixings, to suit wall type. 16mm thick MDF spacer strip fixed to rear of panel A 90mm high, UniSA logo cut in 1.6mm thick, No. 4, satin finish stainless steel and adhesive fixed to panel A, where shown. Metallic silver (012) cast vinyl lettering in corporate Frutiger font as shown University of South Australia 17mm high lettering Building Name high lettering. Metallic Charcoal (027) cast vinyl lettering in corporate Fruitiger font. Size and justification as per 1:1 layout herewith. P-DB-01 Directory Board Type A Building Directory Board Frutiger Prominent location in main ground floor entries of each building Keep a zone of 2m min clear around each sign. People s names and titles are not to appear on this directory board

11 G H Academics' Offices Administrative Suite Computer Pool CRC for Water Quality & Treatment Head of School Microelectronics Centre Reception Research Laboratory: Analysis & Sensors & Electrochemistry Teaching Laboratories: Analytical Chemistry Physical Chemistry Transfer Operations Tutorial Room B Radius = 3200mm Height of panel= mm University of South Australia BONYTHON JUBILEE BUILDING School of Chemical Technology ROOM ROOM ROOM R2-50- Exit - Link to Building Q Teaching Laboratories: R2-62 Lifts to Level 2 First Year Chemistry R2-01- R2-12 R2-41 Postgraduate Students R2-42 Room R2-48 Stairs to Level 2 R2-41B Teaching Laboratories: R2-41C Inorganic Chemistry R2-55 Organic Chemistry R2-47 R2-55 R2-43 R2-45 R2-31 R2-29 R2-38 R2-36 J B D 20mm C I 2 C 20mm A K D E A A B C D E F G H I J K K 18 mm thick HMR, MDF panel 875mm H x 15 W finished in satin, automotive acrylic lacquer to match PMS mm thick, satin natural anodised aluminium panel 5 H x 1200mm W rolled to specified radius and adhesive fixed with V.H.B. double sided tape and silicon adhesive. 1.2mm thick zinc anneal panel, finished in metallic silver automotive acrylic lacquer, with radius to face and double edge returns to both vertical sides. Size 4 H x 1100mm W. Key hole fix to face of panel A. 16mm thick MDF split batton, screw & glue fixed to rear of panel A. 16mm thick MDF split batton, mechanically fixed to wall with suitable fixings, to suit wall type. 16mm thick MDF spacer strip fixed to rear of panel A 125mm high, UniSA logo cut in 1.6mm thick, 37mm high "University of South Australia" Cut in 1.6mm thick No. 4, satin finish stainless steel and adhesive fixed to panel A, where shown. 60mm high Building name cut in 1.6mm thick No. 4 stainless steel adhesive fixed to panel A, where shown. 207mm high 'Floor No. cut in 1.6mm thick No. 4 stainless steel, adhesive fixed to panel A, where shown. Metallic silver (012) cast vinyl lettering in corporate Fruitiger font as shown University of South Australia 17mm high lettering Building Name high lettering. Metallic Charcoal (027) cast vinyl lettering in corporate Fruitiger font. Size and justification as per 1:1 layout herewith. 1.6mm thick satin, natural anodised aluminium panel 420mm H x 300mm W adhesive fixed 6mm proud of panel A, where shown. F P-DB-05 Directory Board Type B Floor Directory Board 1 Frutiger Prominent location in main ground floor entries of each building Keep a zone of 2m min clear around each sign. People s names and titles are not to appear on this directory board

12 G H D B Height of panel= 4 20mm C 470mm University of South Australia BUILDING R School of Chemical Technology ROOM ROOM Academics' Offices R2-50- Exit - Link to Building Q R2-62 Lifts to Level 2 Administrative Suite R2-41 Postgraduate Students Computer Pool R2-42 Room R2-48 CRC for Water Stairs to Level 2 Quality & Treatment R2-41B Teaching Laboratories: Head of School R2-41C Inorganic Chemistry R2-55 Microelectronics Centre Organic Chemistry R2-47 R2-55 Reception R2-43 Research Laboratory: Analysis & Sensors & Electrochemistry R2-45 Teaching Laboratories: Analytical Chemistry R2-31 Physical Chemistry R2-29 Transfer Operations R2-38 Tutorial Room R2-36 C 20mm A D E F A B C D E F G H I J K K 18 mm thick HMR, MDF panel 875mm H x 15 W finished in satin, automotive acrylic lacquer to match PMS mm thick, satin natural anodised aluminium panel 5 H x 1200mm W rolled to specified radius and adhesive fixed with V.H.B. double sided tape and silicon adhesive. 1.2mm thick zinc anneal panel, finished in metallic silver automotive acrylic lacquer, with radius to face and double edge returns to both vertical sides. Size 4 H x 1100mm W. Key hole fix to face of panel A. 16mm thick MDF split batton, screw & glue fixed to rear of panel A. 16mm thick MDF split batton, mechanically fixed to wall with suitable fixings, to suit wall type. 16mm thick MDF spacer strip fixed to rear of panel A 125mm high, UniSA logo cut in 1.6mm thick, 37mm high "University of South Australia" Cut in 1.6mm thick No. 4, satin finish stainless steel and adhesive fixed to panel A, where shown. 60mm high Building name cut in 1.6mm thick No. 4 stainless steel adhesive fixed to panel A, where shown. 207mm high 'Floor No. cut in 1.6mm thick No. 4 stainless steel, adhesive fixed to panel A, where shown. Metallic silver (012) cast vinyl lettering in corporate Fruitiger font as shown University of South Australia 17mm high lettering Building Name high lettering. Metallic Charcoal (027) cast vinyl lettering in corporate Fruitiger font. Size and justification as per 1:1 layout herewith. 1.6mm thick satin, natural anodised aluminium panel 420mm H x 300mm W adhesive fixed 6mm proud of panel A, where shown. J B P-DB-10 Directory Board Type C Floor Directory Board 1 Frutiger Prominent location in main ground floor entries of each building Keep a zone of 2m min clear around each sign. People s names and titles are not to appear on this directory board

13 20mm 20mm 70x85mm silver logo 100mm 20mm H channel plastic extrusion, clear acrylic slides into grooves 30mm Space Blue backing board 180mm 300mm Clear Plastic Extrusion with silver vinyl on the top, fixed with double sided tape 100mm 700mm 800mm Font for the Staff transparencies to be frutiger or the closest font to that. Approximately names should be included on each A4 transparency. The space between the extrusion on the two sides and the bottom will need to be far enough apart to fit 3xA4 transparencies. Clear plastic covering to hold the transparencies in place, needs to fit tight to the curve. natural anodised aluminium backing P-DB-15 Directory Board Type D Staff Directory Board Frutiger Adjacent to Directory Boards Types A-C (note 2m clear zone), otherwise to be approved by Property Unit Direction shall be sought from Signage Officer, Services Unit for details of font, type and size

14 DIRECTORY IDENTIFICATION SIGNS

15 600mm 320mm 120mm 90mm 600mm Section 5-1 January 2001 P-BI-01 Building Identification Type A Alpha Sign Frutiger. metallic colour Charcoal vinyl (027) Prominent external location on main facade of building exact location to be negotiated with and approved by Property Unit Sign to be 600x600x20mm natural anodised Concealed fixings to be used that suit surface application.

16 CENTENARY BUILDING 3mm thick anodised aluminium P-BI-05 Building Identification Type B Name on Building Helvetica. Font size shall be determined through consultation with customer and Property/Services Units. Prominent external location on main facade of building exact location to be negotiated with and approved by Property Unit Background of lettering should provide suitable contrast for ease of reading. Direction should be sought from Property Unit if contrast is unsuitable. Concealed Fixings to be used that suit surface application.

17 3mm natural anodised aluminium face panels, pin fixed proud 3mm mild steel plates seam welded at edges and paint finished Reflex Blue 1 diam. Nominal bore CHS welded to internal cleats Logo-Cast Colour Deep Blue (050) to match reflex blue Text-cast colour charcoal (027) 2000mm 3100mm 200mm Anodised Aluminium 1 diameter nominal bore CHS 3mm thick 800mm 500mm diameter concrete pier 100mm P-BI-10 Building Identification Type C Stand Alone Bollard Sign Frutiger. Cast colour charcoal (027).Font size shall be determined on application Prominent external location adjacent main entrance/forecourt to building, exact location to be approved by Property Unit UniSA logo shall use Cast Colour Deep Blue (050) to match Reflex Blue Standard. Integrity of logo and text shall adhere to standards specified in Your Guide to our Visual Identity-UniSA Design Standards. Text information and layout shall be determined in consultation with customer and Property Services Units upon application. Refer diagram above

18

19 25mm from main frame Curved panel fixed proud of back panel 236.5mm 80mm 63mm Logo-Cast Colour Deep Blue (050) to match reflex blue 1800mm 265mm CAMR Centre for Advanced Manufacturing Research Anodised Aluminium (1.0) Text-cast colour charcoal (027) 6 P-CI-01 Corporate Identification A Wall Mounted Frutiger Prominent wall location adjacent to Corporate Area key entry point

20 Technical Drawing not currently available for this sign type P-CI-05 Corporate Identification B Stand Alone Bollard Sign Frutiger At key entry point to Corporate Area

21

22 20mm 20mm gap from backing board on each side 60mm Back plate is a double sided curved Galvanised envelope. 20mm depth at ends, 100mm depth at centre 120mm Logo-Cast Colour Deep Blue (050) to match Reflex Blue 1.0mm Natural Anodised Face fixed with double sided tape 700mm 500mm School of Nursing & Midwifery Type cap height to be a minimum of 18mm in Charcoal metallic vinyl (cast 027) upper and lower case Backing board is powder coated to match Reflex Blue using courtaulds Colour Space Blue Gloss MJ008A 3 400mm P-FA-01 Functional Area ID B Small Frutiger.18mm min.metallics Charcoal vinyl (027) Prominent wall location at key entry point to division/school/ centre/institute/unit. Mount top of sign 15mm below ceiling height Integrity of logo and text shall adhere to standards specified in Your Guide to our Visual Identity-UniSA Design Standards. Concealed Fittings to be used that suit surface application

23 20mm 60mm 20mm gap from backing board on each side Back plate is a double sided curved Galvanised envelope. 20mm depth at ends, 100mm depth at centre Logo-Cast Colour Deep Blue (050) to match Reflex Blue 180mm 1.0mm Natural Anodised Face fixed with double sided tape 900mm 700mm 80mm School of Nursing & Midwifery Type cap height to be a minimum of 30mm in Charcoal metallic vinyl (cast 027) upper and lower case Backing board is powder coated to match Reflex Blue using courtaulds Colour Space Blue Gloss MJ008A 80mm 4 500mm P-FA-05 Functional Area ID A Large Frutiger.30mm min.metallics Charcoal vinyl (027) Prominent wall location at key entry point to division/ school/centre/institute/unit Integrity of logo and text shall adhere to standards specified in Your Guide to our Visual Identity-UniSA Design Standards. Concealed Fittings to be used that suit surface application