EUROACCESSORIES COLUMN FORMERS
|
|
|
- Spencer Bond
- 5 years ago
- Views:
Transcription
1 EURO ACCESSORIES COLUMN FORMERS
2 Introduction: Euro Accessories are the sole distributors of the BAG Column Formers in the UK and Ireland. BAG have 15 years experience in the production and distribution of Column Formers throughout Europe. BAG Column Formers are a single use formwork system that gives an excellent smooth fair face surface finish. Our Column Formers are manufactured by welding together several layers of high quality polyethylene coated kraft paper, which are spirally wound and bonded together by heating the polyethylene. Once this step is complete, a water resistant foil is also spirally wound over the kraft paper, sealing the column against humidity. This manufacturing process requires no additional adhesives which reduces the wall thickness, making the BAG Column Formers light and easy to handle. Designs: Lined - BAG Column Formers have a PVC liner which is fitted the whole length of the inner diameter the Column Former, this provides an impeccably smooth finish. BAG Column Formers will only leave a hairline seam on the concrete from the point where the liner joint meets. Unlined - BAG Column Formers are also available unlined for applications where surface finish is not critical. This Column Former will leave a spirall effect on the finished column. Square - BAG can offer sqaure or rectangular columns on request, made from our standard Column Fomer with an additional polystyrene insert, manufactured to your specific requirements. Bespoke - BAG can also offer made to order bespoke designs. Please contact our sales team for more details. Advantages: Light easy to handle as opposed to steel shuttering. Labour saving. Easy to strip, no mould oils required. Quality fair faced finish. Can be used for protective cover for the completed columns. Water Resistant: The column formers are water resistant due to the manufacturing process and the outer layer of foil, both of which seal the column former against humidity. Protection will be required when stocking in direct contact with rain and water. DISCLAIMER: Please note BAG Column Formers are Water Resistant, not Water Proof.
3 Circular Range: Tube I/D (mm) Tube Wall Thickness (mm) Maximum Pour Height (mtr) Concrete Required (m 3 /mtr) Weight (kg/mtr) Caution: The concrete pour speed should not exceed more than 4 metres per hour. Concrete can be poured into the BAG Column former via skip or bucket for diameters of up to 450mm and lengths of 4 metres. Larger sizes will require concrete to be placed by a pump and hose. Concrete should be placed slowly to eliminate air entrapment between the tube liner. Do not force column formers into position. t
4 Installation: BAG Column Formers are very light and can be transported without any handling equipment. The tubes can be secured on the base using timber which is fixed to the floor or decking as required. The top of the tube can either be secured using timber or with our own tension belt system. When using our system you are able to fix three sloped bearings with a 120 degree angle. Normally two fixing points are sufficient at a 90 degree angle. If the Column Former is 7 metres or more we recommend that an additional fixing point is used at the middle point of the tube. Storage: BAG Column Formers are manufactured with a water resistant coating for extra durability. Our Column Formers can be stored vertically or horizontally, Protection will be required when stocking in direct contact with rain and water. Stripping: BAG Column Formers can be stripped after 48 hours. Our Column Formers are designed and manufactured with a steel wire that runs inside the layers to provide a quick and easy stripping system. Once stripped the former can be reused as a protective cover for the finished concrete pillar thus removing any chance of damage afterwards.
5 Square Range: Internal Dimensions (mm) Tube O/D (mm) Maximum Pour Height (mtr) Concrete Required (m 3 /mtr) Weight (kg/mtr) 200 x x x x x x x x Rectangular Range: Internal Dimensions (mm) Tube O/D (mm) Maximum Pour Height (mtr) Concrete Required (m 3 /mtr) Weight (kg/mtr) 175 x x x x x x x x x x x x x x x x x x x x x x x t
6 Column Formers with a difference: BAG Column Formers are the only ones available on the UK market with a textured finish option. Several different finshes are available on request. Pattern 001 Pattern 002 Pattern 003 Pattern 004 Pattern 005 Pattern 006 Pattern 007 Pattern 008
7 t
8 Branches: Euro Accessories Ltd (Head Office) Unit 11 Millbuck Way Elworth Sandbach Cheshire CW11 3HT t f Euro Accessories Ltd (Southern) Unit 45, Youngs Industrial Estate Paices Hill, Aldermaston Reading, RG7 4PW t f Euro Accessories Ltd (Ireland) Drumhierny Leitrim Village Co. Leitrim Rep. Of Ireland t./f m Euro Accessories Product Range: Plastic, Concrete & Wire Spacers Slab Accessories Magnet Systems Cast-in Channel Precast Accessories Screed Rails Reinforcement Continuity Systems Formwork Systems & Accessories Piling Accessories Lifting & Fixing Systems Double Walling Accessories Chemicals & Sprayers
TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B www.euroacc.co.uk Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger
NON - DRILL Rapid Post System
EURO ACCESSORIES NON - DRILL Rapid Post System www.euroacc.co.uk Introduction: The Non-Drill Rapid Post System utilises the Euro Accessories Pin Anchor lifting system as a ready-made fixing point for fencing,
Monotub DD Disposable formwork for circular columns
Monotub DD Disposable formwork for circular columns ANCHOR BAY CONSTRUCTION PRODUCTS LIMITED Monotub DD Disposable formwork for circular columns Monotub DD is a formwork for casting round columns. This
WORK BELOW LOWEST FLOOR FINISH 1/7 230, , , FRAME 2/6 96, , ,056.00
Description Page No Summary Amount Summary 1/7 230,694.60 22,019.25 22,642.65 2/6 96,801.30 80,150.60 114,056.00 Total Per Unit (MYR) 327,495.90 102,169.85 136,698.65 Total Unit(s) X 1 2 2 Total Per Type
Formwork Direct International. Tel: Aluminium Faced Cardboard Column Formwork
Formwork Direct International Tel: 0151 532 0179 sales@formworkdirect.co.uk www.formworkdirect.co.uk Aluminium Faced Cardboard Column Formwork Circular Column Formwork Circular Column Formwork TBT Circular
ITEM No. D E S C R I P T I O N UNIT QTY. 5-E343.2 In class III material m³ 1,260 - Max. Depth: m For disposal
EARTHWORKS Excavation for foundations 5E343.2 In class III material m³ 1,260 Max. Depth: 0.50 1 m For disposal 5E334.2 In class III material m³ 720 Max. Depth: 1 2 m For disposal Filling Ancillaries 5E723.0
FRANK Stremaform formwork elements
FRANK formwork elements technologies for the construction industry Applications Working joints working joints enable large structural elements to be formed in sections. The sequence of these working joints
CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS 602 MARCH 1993 CONSTRUCTION SPECIFICATION FOR THE INSTALLATION OF ELECTRICAL CHAMBER 602.01 SCOPE 602.02 REFERENCES 602.05 MATERIALS TABLE OF CONTENTS
Civil Engineering Construction I (CBE5031)
Civil Engineering Construction I (CBE5031) Precast Concrete 1 Definition of Precast Concrete Precasting means casting a concrete member at a place other than where it will be used and then moving it to
Preventing Water Leakage through Construction Joints using SYNKOFLEX Preformed Compressible Waterstop
Preventing Water Leakage through Construction Joints using SYNKOFLEX Preformed Compressible Waterstop Introduction A typical problem in most Water Retaining Structures is the leakage of water through Construction
Concrete Slab-on-Ground
Concrete Slab-on-Ground This training package provides information on concrete slab-on-ground construction, including reinforcement, formwork, mix, placement and curing, for village infrastructure and
Modular formwork. handier light weight enviroment friendly average low cost reusable short time
Modular formwork handier light weight enviroment friendly average low cost reusable short time handier The biggest panel is 120x60cm, weight only 10.5kg, which can be lift and set up by only one person
Introduction. A publication by Aquamor
Introduction Very large numbers of family owned wells have been built in Zimbabwe. This number far exceeds 100 000. In almost every case the family itself has excavated the well and in many cases also
SikaProof Bentonite Plastic DPM overlap - Compacted Backfill Scale 1:5. Detail no: SB01 - Nov 2013
100 100 1.1 Metre wide piece of fully bonded to cast concrete 300 SikaSwell P Profile 2010H Compacted backfill Plastic DPM Min. 300mm overlap with Bentonite Paste in the lap 300 300 Plastic DPM overlap
TILT-UP PRECAST CONCRETE SANDWICH PANELS. A. Work includes, but is not limited to, the following:
PART 1 GENERAL 1.01 SUMMARY SECTION 03460 TILT-UP PRECAST CONCRETE SANDWICH PANELS A. Work includes, but is not limited to, the following: 1. Architectural precast concrete sandwich wall panels. 2. Integral
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" 1 of 10 Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 X-Chairs.. 4 Rod Spacers.. 4 Type-A. 5 Sand
Prestressed Concrete Tanks. Design & Construction
Prestressed Concrete Tanks Design & Construction The PRELOAD Advantage PRELOAD has maintained a focused vision on designing and constructing the highest-quality and most-durable liquid storage tanks for
tried tested trusted since 1982 manufacturing
tried tested trusted F O R 3 0 Y E A R S Developed in the early 80 s Pecafil was patented by the FRANK Group in 1982 and has been developed into a complete permanent formwork system that primarily speeds
Rapid Clamp EUROBUYSERVICES EBS
Rapid Clamp Forming System EUROBUYSERVICES EBS System Design The Symons Rapid Clamp system is a highstrength concrete forming system designed for fast-paced gangform operations. Panels and fillers This
Sealing products. The new Generation of sealing-products
Sealing products The new Generation of sealing-products Product Overview Product wolfseal KB 16 Application wolfseal KB 16.7 can be installed in construction joints of all types in concrete units up to
Intermountain Section AWWA Conference - 2.0MG Layton Water Tank. Jake O Brien
Intermountain Section AWWA Conference - 2.0MG Layton Water Tank Jake O Brien Presentation Outline Layton City s decision process Tank Design/Construction Tendon Tanks - don t shed the good stuff Layton
LAUNCHING ITS INNOVATIVE ANTI-IMPALEMENT REACTER CAP
LAUNCHING ITS INNOVATIVE ANTI-IMPALEMENT REACTER CAP SPECIALIST CONSTRUCTION ACCESSORY SUPPLIERS 2 RFA-TECH CONTINUES TO OFFER NEW AND INNOVATIVE PRODUCTS TO ITS CUSTOMERS IN ORDER TO ENHANCE ITS POSITION
Dock shelter and dock seal Full choice of dock shelters and dock seals can be included, refer to Stertil Stokvis brochure.
Dock houses A Stertil Stokvis Dock House forms a complete self-contained loading bay which can be installed directly on the façade of a building, so that no internal space is lost. Units are purpose-made,
PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
04 05 PRODUCTS AND SYSTEMS FOR ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES Over floor trunking 0 300 9 0 300 93 0 38 00 Conform to standard EN 50085-- For creating a link between trunking, column,
SECTION TILT-UP PRECAST CONCRETE SANDWICH PANELS. A. Work includes, but is not limited to, the following:
PART 1 GENERAL 1.01 SUMMARY SECTION 03460 TILT-UP PRECAST CONCRETE SANDWICH PANELS A. Work includes, but is not limited to, the following: 1. Architectural precast concrete sandwich wall panels. 2. Integral
TECHNICAL INFORMATION
PAGE 1 of 8 TECHNICAL INFORMATION TOPFLOW HORIZONTAL TOPFLOW Horizontal s finishing characteristics and high quality surface finish can eliminate the need to power float concrete on site dependant on project
84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes System Components.
84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 Protecting Membranes 90 System Components installation/ SYSTEM COMPONENTS INSTALLATION ADVICE LAPPING and JOINTING
Intelligent magnetic shuttering solutions for precast concrete elements with connecting reinforcement and complex geometries
Ratec GmbH, 68766 Hockenheim, Germany Intelligent magnetic shuttering solutions for precast concrete elements with connecting reinforcement and complex geometries Connection technology represents a particular
Garage Beam System DAYTONSUPERIOR.COM FORMING. For Post-Tensioned Beam and Slab Parking Structures
Garage Beam System For Post-Tensioned Beam and Slab Parking Structures FORMING The Garage Beam System is a complete forming system designed specifically for post-tensioned beam and slab multi-story parking
Requirements for Measuring and Pricing of Structural Concrete
Requirements for Measuring and Pricing of Structural Concrete October 2016 TRANSPORT INFRASTRUCTURE IRELAND (TII) PUBLICATIONS About TII Transport Infrastructure Ireland (TII) is responsible for managing
Concrete Framing Systems - Walls and Columns
Concrete Framing Systems - Walls and Columns Casting a Concrete Wall Wall Footing Reinforcing Wall Forms Pouring Concrete Finishing the Concrete Controlling Cracking Insulating Concrete Forms (ICF) Tilt-Up
The superior self-compacting concrete
LAFARGE READYMIX The superior self-compacting concrete The superior selfcompacting concrete THE ADVANTAGES ARE IMPRESSIVE REDUCES LABOUR COSTS Lafarge has developed a superior range of concretes in response
AQUABIT One-component paste waterproofing for foundations, terraces and balconies.
WATERPROOFING paste AQUABIT 161817 One component paste water-based waterproofing, modified to improve workability and covering features. The product is enriched with polystyrene microspheres that allow
BROCHURE. Steel Forming System. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. DAYTONSUPERIOR.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. DAYTONSUPERIOR.COM Max-A-Form System Design The Max-A-Form Forming
Testing. Test drainage products according to the applicable AASHTO or ASTM specification, except as otherwise noted.
909.01 Section 909. DRAINAGE PRODUCTS 909.01 General Requirements. If only the size and class are specified for a culvert or sewer, use the pipe materials as shown in Table 401-1 and 402-1 respectively.
w w w. m d u e. i t - i n f m d u e. i t
PRICED BILL OF QUANTITIES Supply of Emmedue double panel PDM, made up with two EPS slabs, density 30 kg/m 3, cm 5+5 thickness, reinforced with external metal grids realized with steel wires having diameter
INFORMATION AGILIA HORIZONTAL
AGILIA HORIZONTAL PAGE 1 of 7 INFORMATION AGILIA HORIZONTAL Agilia Horizontal s finishing characteristics and high quality surface finish eliminate the need to power float concrete on site. Applications
ADVANTAGES THE LIGHTEST FILLING SOLUTION HIGH LOAD-BEARING CAPACITY
SINGLE-USE FORMWORK SYSTEM UP TO 300 CM elevetor new the evolution of crawl space LOGISTICAL ADVANTAGES THE LIGHTEST FILLING SOLUTION HIGH LOAD-BEARING CAPACITY w w w. g e o p l a s t. i t BUILDING 02
84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 protecting Membranes 90 System Components.
84 Lapping & Jointing 86 Service Pipe Penetrations 87 Sealing to Cavity Wall Constructions 88 protecting Membranes 90 System Components installation/ SYSTEM COMPONENTS INSTALLATION ADVICE LAPPING and JOINTING
Halfen systems for the support and restraint of brickwork
Halfen Brickwork Support Systems Halfen systems for the support and restraint of brickwork Introduction Halfen is a leading supplier of channel fixing systems and building components, with manufacturing
Inverted Double T BEAMS and SLABS Applications
NORDIMPIANTI P R O D U C T S APPLICATIONS T U R N K E Y S E R V I C E G L O B A L Inverted Double T BEAMS and SLABS Applications Inverted Double T Beams U Panels Inverted Double T Slabs Inverted Triple
Concrete Framing systems. Design choices. Basic flavors
Concrete Framing systems Design choices Site Cast Concrete gives a designer a lot of freedom in the design and construction of walls, columns and surface textures. When it comes to spanning, concrete offers
Construction Specification for Utility Adjustments
Engineering & Construction Services Division Standard Specifications for Road Works TS 4.50 September 2017 for Utility Adjustments Table of Contents TS 4.50.01 SCOPE... 2 TS 4.50.02 REFERENCES... 2 TS
FALSEWORK SOLUTIONS: SLAB SHORING SYSTEM - ROYALFRAME50 SERIES
ROYALFRAME50 SLAB SHORING SYSTEM ROYAL FRAME 50 ROYALframe50 is a lightweight, improved alternate formwork shoring frame. It has galvanised tube legs, each with a 51mm outside diameter and a safe work
Stylite. T-Beam Suspended Floor Insulation Technical Datasheet. Stylite T-Beam Floor Insulation
T-Beam Floor Insulation Lambda from 0.030 W/mK Reduces cold bridging Lightweight Cost effective Can be used on all suspended floors Quick & easy installation Use in commercial & residential property Minimal
The difference is Guidance for the preparation of Deck Manufacturing Schedules
The difference is Guidance for the preparation of Deck Manufacturing Schedules innovation, commitment, support. 2 Guidance for the preparation of Deck Manufacturing Schedules Minimum Requirements for Schedule
IRON AND STEEL PRODUCTS
Announcement: Please be informed that the Fast Track Clearance facilities will expire on 21 st August 2013. In addition, with effective from 22 nd August 2013, all Certificate of Approval applications
THE PERFORMANCE OF CONCRETE GROUND FLOOR SLAB REINFORCEMENT TO CONTROL SHRINKAGE CRACKING. D H Chisholm 1
THE PERFORMANCE OF CONCRETE GROUND FLOOR SLAB REINFORCEMENT TO CONTROL SHRINKAGE CRACKING D H Chisholm 1 ABSTRACT In a typical residential concrete floor slab, the cast in strip footings on the slab perimeter
Channel Drain Shower Base. Aqua Line pro. Installation Instructions
Channel Drain Shower Base. Aqua Line pro Installation Instructions 02 JACKOBOARD Aqua Line pro System components a JACKOBOARD Aqua Line pro b JACKOBOARD Aqua Line pro - Horizontal Drain (Art. No. 4510370)
Pipeline Accessories. PSI Wall Sleeves. General Information Selection Guide Technical Data Installation Instruction
Pipeline Accessories PSI Wall Sleeves General Information Selection Guide Technical Data Installation Instruction 1 PSI Wall Sleeves made of steel General Information An economic method to seal hydrostatically
TECHNICAL EVALUATION REPORT No. 27/2008/2060
TECHNICAL EVALUATION REPORT No. 27/2008/2060 Sheet 1 of 16 Sheets This report is a correct record of the measurements and observations made. The report is intended for the private information of those
Heavy Rib. Page 1 of 6. Expanded Mesh & Metal Products. Key Product Features:
TMI- is used widely in construction work for joints, stop-end, retaining walls and columns. It creates a strong bond base for successive pours. is fixed as permanent formwork. Key Product Features: Unique
Construction. Hydrophilic, swellable hose for sealing construction joints in watertight structures. (formerly Sika Injectoflex HPM)
System Product Data Sheet Edition 06/12/2010 Identification no: 02 07 03 07 010 2 000099 (formerly Sika Injectoflex HPM) SikaFuko Swell 1 (formerly Sika Injectoflex HPM) Hydrophilic, swellable hose for
1 Exam Prep Placing Reinforcing Bars Tabs and Highlights
1 Exam Prep Placing Reinforcing Bars Tabs and s These 1 Exam Prep Tabs are based on the CRSI Placing Reinforcing Bars Recommended Practices, 9 th Edition. Each 1 Exam Prep tabs sheet has five rows of tabs.
City of Mesquite General Design Standards Revision Date:
SCREENING WALLS (Public and Private) Page 1 of 6 Section 1 General Design & Notes 1.1 Standards 1.1.1 All screening walls in the City of Mesquite and within its Extraterritorial Jurisdiction (ETJ), both
Spacers, Formwork and Precast System
Spacers, Formwork and Precast System INVISIBLE BUT INDISPENSABLE We are there when it is about small building projects and large projects. Where concrete is installed, our products make a fundamental contribution
10 EXTREME BASEMENT PANELS
10 EXTREME BASEMENT PANELS On Granular Footings 1. The type of soil is a factor in determining foundation construction details such as footing design, backfill, and drainage provisions. Soils are classified
Lattice Plate Flooring
Lattice Plate Flooring Introduction Pekso Precast manufacturers and supplies a range of precast concrete structural building products ranging from foundations and flooring systems that includes Lattice
Demidec. cornish concrete products Demidec Flooring and Permanent Formwork
Demidec cornish concrete products Demidec Flooring and Permanent Formwork Demidec What is Demidec? Demidec is a thin precast concrete plate, typically 60mm deep, although this can vary depending on the
Alisply Walls. Product brochure
Alisply Walls Product brochure Encofrados J. Alsina S.A. Pol. Ind. Pla d en Coll Camí de la Font Freda, 1 08110 Montcada i Reixac (Barcelona - Spain) Tel.: (+34) 935 753 000 Fax: (+34) 935 647 059 E-mail:
User Manual. Formwork System.
User Manual Formwork System www.scformwork.com Content Square column system...3 Specs & Capability...4 How to set up...5 Clamps...7 Pour rate & Safe filling height...09 Circular column system...11 Detail
Injection Systems RASCOtec
Injection Systems RASCOtec Injection System RASCOtec Injection System From a technical point of view, injection systems are widely recognized as the number-one solution for waterproofing buildings exposed
This precast prestressed concrete pedestrian
The Rockach Boulevard Pedestrian Bridge by ELIEZER SHAMIR Partner, E. Shamir - H. Posner Consulting Engineers Tel-Aviv, Israel This precast prestressed concrete pedestrian bridge crosses the Rockach Boulevard,
Delta Level 1000 Hinged Lip Pit Mounted & Suspended Frame Dock Leveller
Delta Level 1000 Hinged Lip Pit Mounted & Suspended Frame Dock Leveller Product Description The Delta Level 1000 is one of our ranges of hinged lip dock levellers. Dock levellers are indispensable for
Tender Schedule for the Work "Construction of Staff qtrs. at Tainda S/S (1no.)
1.Amount put to Tender:- Rs 7,48,024/- 2.E.M.D. Required: - R 8,000/- 3. Class of contractor :- "D" & "C" 4. Cost of Tender Paper:- R 4,200/- Sl- No Tender Schedule for the Work "Construction of Staff
PRESENTATION PLAN A MODEL COMPARISON FLOOR CONSTRUCTION
PRESENTATION PLAN A MODEL COMPARISON FLOOR CONSTRUCTION An overview of costing strategies for wood framed construction elements CREATING A PROJECT ENDLESS POSSIBILITIES COMPATORS LIST A FLOOR Cast in Place
PRODUCT DATA SHEET. SikaFuko Eco-1 PRODUCT- DESCRIPTION. Re-injectable hose for sealing construction joints in watertight structures
PRODUCT DATA SHEET SikaFuko Eco-1 Re-injectable hose for sealing construction joints in watertight structures PRODUCT- DESCRIPTION USES PRODUCT CHARACTERISTICS TESTING & APPROVALS Re-injectable hose system
Main Roads Standard Specification
Main Roads MRS. Manufacture of Precast Concrete Culverts December 7 COPYRIGHT State of Queensland (Department of Main Roads) 7 Copyright protects this publication. Except for the purposes permitted by
IRON, STEEL AND ALUMINIUM PRODUCTS
IRON, STEEL AND ALUMINIUM PRODUCTS NO. PDK 2017 PDK 2012 DESCRIPTION OF GOODS 7207 Semi-finished products of iron or non-alloy steel. - Containing by weight less than 0.25% of carbon: 1 7207110000 720711000
Chuck Brooks, P.E., P.Eng. C&S Engineers
Chuck Brooks, P.E., P.Eng C&S Engineers 315-455-2000 cbrooks@cscos.com AGENDA INTRO BASICS KEY CONSIDERATIONS DESIGN CONSTRUCTION Questions to be Explored 1. Concrete Tiltup Panels are designed for the
Bonner Bridge Replacement Update:
Bonner Bridge Replacement Update: Jerry D. Jennings, PE - NCDOT Division 1 Engineer Pablo A. Hernandez, - NCDOT Resident Engineer September 18, 2017 Bonner Bridge Replacement Timeline Refresher Bonner
***************************************************************************************************************
03100 CONCRETE FORMWORK *************************************************************************************************************** SPECIFIER: CSI MasterFormat 2004 number 03 11 00 ***************************************************************************************************************
Pro-Con Structural Study of Alternate Floor Systems
Andrew Covely Structural Dr. Linda Hanagan The Helena New York City, NY October 27, 2004 Pictures courtesy of Fox & Fowle Architects Pro-Con Structural Study of Alternate Floor Systems Executive Summary
PLAYGROUND FENCING AND GATES
PLAYGROUND FENCING AND GATES We offer a variety of solutions in timber and steel for school, playground and play area applications where security, safety, durability and sustainability are key considerations.
PRECAST RECTANGULAR CHAMBERS
STANDARD MODELS GENERAL ROUGH SKETCH Available for: Sewer manhole, valve chamber, trouser manhole, and pumping station. Ø60-Ø762 ADJUSTMENT RING 7-00-2-0 20-2 30-60 RING 200-30 60-60 000-220 9ø 6 FLAT
www.fastformsystems.com info@fastformsystems.comm South Tel: 00 44 (0) 207 1481274 North Tel: 00 44 (0) 8456 171152 Fast-Form The Complete Formwork system Safer / Faster / Greener / Cheaper One system,
COST EFFECTIVE BUILDING SYSTEMS FOR RAPID CONSTRUCTION IN TROPICAL CLIMATES
COST EFFECTIVE BUILDING SYSTEMS FOR RAPID CONSTRUCTION IN TROPICAL CLIMATES M.T.R. Jayasinghe *, K.K.G.K.D. Kariyawasam, C. Jayasinghe Department of Civil Engineering; University of Moratuwa-Sri Lanka
PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS
![PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS](/thumbs/93/113339169.jpg "PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS")
PRE-CAST YARDS / LIGHTWEIGHT PANEL / HOLLOW CORE / TELECOM MANHOLE / MRTC [SUB-WAY] / PLASTIC SHIMS LONG PUN ENTERPRISE PTE LTD SPACER SPECIALIST SDN BHD FORMWORK PRODUCT CATALOGUE PRE-CAST YARDS CATERPILLAR
INDEX. introduction 4. access scaffolding 5. selflock system 16. wall system 17. column boxes 29. slab system 31. props 36. contact details 40
PRODUCT BROCHURE INDEX introduction 4 access scaffolding 5 selflock system 16 wall system 17 column boxes 29 slab system 31 props 36 contact details 40 INTRODUCTION Augusta Manufacturing was established
PROTAN EXPOSED ROOF SYSTEMS
PROTAN EXPOSED ROOF SYSTEMS STANDARD OVERLAP SECRET-FIX PROVAC PRE-FABRICATED SHEETS ADHERED PROTAN SOLUTIONS the forefront of membrane technology. Protan (UK) Ltd offers a range of oldest roofs continue
CHRYSO Flexo. An Innovative System for Precast Insulated Concrete Sandwich Panel. Products for the Reinforced Concrete Construction Industry
CHRYSO Flexo An Innovative System for Precast Insulated Concrete Sandwich Panel Products for the Reinforced Concrete Construction Industry Description CHRYSO Flexo is an advanced technology for insulated
CONCRETE ACCESSORIES. Formwork Accessories FORMWORK
CONCRETE CCESSORIES Formwork ccessories 69 MGNETS K SERIES The K Series magnet is machined from solid material and fitted with high performance magnets, providing a high power system for securing DR nchors.
CONCRETE ACCESSORIES
CONCRETE CCESSORIES Formwork ccessories 74 MGNETS K SERIES The K Series magnet is machined from solid material and fitted with high performance magnets, providing a high power system for securing DR nchors.
0.75 " transparent hose w/ valve for head measurements fixed to screws 20 MIL PVC liner. 6" gate valve
0.75 " transparent hose w/ valve for head measurements fixed to screws 250x1000 RC beam 6" gate valve Foundation preparation in accordance with technical specifications and as approved by engineer 25 cm
Contact Tel No : Fax No: Add:
Contact Tel No : +974 40053333 Fax No: +974 40059902 Email Add: info@castle-mba.com www.castlemba.com 0 Clip Spacer (MC) Product Code Item Description Concrete Cover (mm) For Steel Bar Diameter (mm) Packing
PZ H-BEAM FORMWORK PAVLOS ZENONOS & SONS LTD CATALOGUE
PZ HBEAM FORMWORK PAVLOS ZENONOS & SONS LTD CATALOGUE PZ HBEAM FORMWORK PZ HBEAM FORMWORK SOLUTIONS PZ HBEAM FORMWORK SYSTEMS & APPLICATIONS PZ HBEAM COLUMN FORMWORK PZ HBEAM RETAINING WALL FORMWORK PZ
Formwork being erected
CONCRETE FORMWORK Formwork being erected Most of the pads and concrete footing poured Formwork for the parkade walls is built for each pour Most of the parkade walls been completed 2 TYPES OF FORMWORK
Standard Details for FAST TREAD Preformed Stairs
Standard Details for FAST TREAD Preformed Stairs REV.7 050517 1.1 FAST TREAD TYPICAL LANDING CONNECTION DETAIL Galvanised steel stringer Formwork setback dimension Concrete landing pour line Reinforcement
Steel Forming System BROCHURE. A durable, all-steel forming system that is ideal for pier caps and self-spanning applications.
Max-A-Form Steel Forming System BROCHURE A durable, all-steel forming system that is ideal for pier caps and self-spanning applications. Max-A-Form System Design The Max-A-Form Forming System combines
MEET THE BETTER IDEAS. Products & Services. for an efficient production of high quality precast concrete elements.
MEET THE BETTER IDEAS Products & Services for an efficient production of high quality precast concrete elements. Shuttering Magnets For higher efficiency and quality in a concrete factory. RATEC shuttering
POOL. Pool made easy INSULATING FORMWORK PANELS
POOL Pool made easy INSULATING FORMWORK PANELS POOL MADE EASY AN INNOVATIVE AND PATENTED PROCESS With KEPS, simplicity comes in the field of pool s building, for a high-performance, economical and sustainable
BISON PRECAST FLOORING SPECIFICATION
BISON PRECAST FLOORING SPECIFICATION 1.0 SCOPE OF THE SPECIFICATION 1.01 Relates to: This specification covers the design, manufacture and associated site work of the following types of floors:- Hollowcore
POST TENSIONED SLABS. Imagineering the possibilities
POST TENSIONED SLABS Imagineering the possibilities imagineering... CCL post - tensioned slab solutions represent continuous development through involvement in building structures worldwide. CCL systems
We Offer Solutions. Temporary Storage
We Offer Solutions Temporary Storage Why Temporary Storage? It Makes Economic Sense The Union Iron Works Temp-Stor temporary grain storage systems are an inexpensive alternative to traditional permanent
De Montfort Mark 7 Incinerator (Flatpack)
De Montfort Mark 7 Incinerator (Flatpack) Introduction This design is specially for those occasions when a large number of incinerators are to be built at one location and transported to the places where
Stylite. T-Beam Suspended Floor Insulation Technical Datasheet. Stylite T-Beam Floor Insulation.
T-Beam Floor Insulation Lambda from 0.030 W/mK Reduces cold bridging Lightweight Cost effective Can be used on all suspended floors Quick & easy installation Use in commercial & residential property Minimal
Miller Collective Safety at Height Solutions EPIC ULTRA Barrier System EPIC Post-N-Barrier System EPIC Basic Barrier System
For over 65 years the Miller brand has been synonymous with personal fall protection products and services. As the global leader in safety at height solutions, Honeywell Safety Products introduces a new
GOVIND SHUTTERING STORE. Quality Assured Consistent Delivery
GOVIND SHUTTERING STORE Quality Assured Consistent Delivery About us Govind Shuttering Store is a performance based service driven, renowned name in scaffolding and shuttering material supplier industry.
Chapter 2 Notation and Terminology
Reorganized 318 Chapter Titles Chapter 1 General 1.1 Scope 1.2 Purpose 1.3 Interpretation 1.4 Drawings and Specifications 1.5 Testing and Inspection 1.6 Administatration and Enforcement 1.6.1 Retention
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ITEM 03100 CONCRETE FORMWORK 1.0 GENERAL 1.1 DESCRIPTION This section defines requirements and limitations for design, construction, erection, and removal of concrete formwork for