ESTIMATING/TAKE-OFF AND ORDERING GUIDE
|
|
- Kimberly Park
- 5 years ago
- Views:
Transcription
1 SEPTEMBER, 2017 E.C ESTIMATING/TAKE-OFF AND ORDERING GUIDE
2 2 INDEX AUGUST, 2017 PAGE PARTS IDENTIFICATION ,4 MATERIAL TAKE-OFF PERIMETER HEAD DETAILS PERIMETER SILL DETAILS PERIMETER JAMB DETAILS INTERMEDIATE HORIZONTAL DETAILS INTERMEDIATE VERTICAL DETAILS ANCHOR CHART CORNERS - SS CORNERS - SSI CORNERS - SSIT ENTRANCE DETAILS MID ANCHOR DETAIL SHEAR BLOCK VERTICAL DETAILS SHEAR BLOCK HORIZONTAL DETAILS Consult the KawneerDirect website for the latest updates to the estimating/ take-off and ordering guides before beginning work on your project.
3 SEPTEMBER, 2017 E.C PART IDENTIFICATION 3 FRAMING 3 3/4" MULLIONS Extrusion # Profile Description FRAMING 5 1/4" MULLIONS Extrusion # Profile Description FILLERS Extrusion # Profile Male Half Vertical Female Half Vertical Head/Sill Horizontal Intermediate Horizontal Description PERIMETER TRIMS Extrusion # Profile Male Half Vertical Female Half Vertical Head/Sill Horizontal Intermediate Horizontal Description Open Back Filler for SS System GLASS CHAIRS Part # Profile Open Back Filler for Description SS System SSI System SSIT System INTERFACE Extrusion # Profile SSI & SSIT Systems Perimeter Trim Splice Sleeve Description SSI & SSIT Systems
4 4 PART IDENTIFICATION AUGUST, 2017 SPLICE JOINT ACCESSORIES Part # Profile Description GLAZING ACCESSORIES Part # Profile Description GLAZING TEMPS Splice Sleeve 3 3/4" Mullion Splice Sleeve 5 1/4" Mullion Splice Sleeve Stop Screw (Typical) Jamb Splice Sleeve Fixing Screw Profile Description SS System SSI System SSIT System Intermediate Splice Sleeve Fixing Screw SSIT / SBIT 3M VHB TAPE For 3M VHB Structural Glazing Tape B23F (Black face w/ gray edges) or G23F (Gray all sides) by authorized 3M Distributors, contact 3M/PVD at ( ). Mandatory project review by 3M/PVD is required before ordering 3M VHB (.09" x.875" ) tape. Part # Glazing Temporary Wedge Gasket INSTALLATION INSTRUCTIONS Part # Description Mullion Air Seal Gasket SSI Glazing Tape Perimeter Glazing Tape SS System Interior Gasket Interface Tape Square SSI & SSIT System Interior Gasket SS System Sealant Backer (12' Lengths) Toggle Assembly Perimeter Trim Clip SS/SSI/SSIT Stock Length Fabrication Instructions SB/SBI/SBIT Stock Length Fabrication Instructions Clearwall SS/SSI/SSIT Installation Instructions Clearwall SB/SBI/SBIT Installation Instructions Clearwall Door Adapter Installation Instructions
5 AUGUST, 2017 MATERIAL TAKE-OFF 5 FEMALE VERTICAL HALF MALE VERTICAL HALF FEMALE VERTICAL HALF * PERIMETER TRIM NOTE: 45 SQ/FT IS THE ALLOWABLE MAXIMUM GLASS SIZE LIMIT FOR A 4-1/2 LONG GLASS CHAIR. GLASS SIZES ABOVE THIS REQUIRE THE GLASS CHAIR AND SETTING BLOCK TO BE DOUBLED UP (SIDE BY SIDE) AT POINTS REQUIRED. HORIZONTAL MALE VERTICAL HALF INTERIOR WEATHERING SETTING BLOCK & CHAIR HORIZONTAL DESCRIPTION PART NUMBER TAKE-OFF GUIDE Vertical (24'-0" S/L) Horizontal (24'-0" S/L) Open Back Filler (24'-0" S/L) Interface (24'-0" S/L) Perimeter Trim (24'-0" S/L) Make Proper Selection Make Proper Selection Make Proper Selection Make Proper Selection Make Proper Selection Stock Lengths Required Stock Lengths Required Stock Lengths Required Stock Lengths Required Stock Lengths Required 3M VHB Tape (SSIT) Make Proper Selection Interface Footage Perimeter Trim Splice Sleeve 1 Per Perimeter Trim Splice Perimeter Trim Clip Setting Block Chair - SS, SSI, SSIT Setting Block - SS, SSI, SSIT Glazing Temporary Clip - SS, SSI, SSIT Toggle Assembly , , , , , , at Vert./Horiz. C/L Per Perim. Trim Part *2 Per D.L.O. *2 Per D.L.O. 20 Per Project (Re-use) Vertical/Horiz. Footage x 12 / 6" or 9" O.C. Air Seal Gasket x Vertical Footage Interior Weathering - SS Interior Weathering - SSI & SSIT x Interm. Vert./Horiz. Footage / 1 x Perim. 2 x Interm. Vert./Horiz. Footage / 1 x Perim. SSI Interface Tape x Interm. Vert./Horiz. Footage / 1 x Perim. Perimeter Trim Tape Glazing Temporary Wedge Gasket Perimeter Trim Footage 3" Per Glazing Temp Backer - SS Vertical to Horizontal Framing Screw Vertical/Horizontal Footage 8 Per Interm. Horiz., 4 Per Head/Sill Horiz. Frame Fixing / Perim. Trim Clip Screw / Glazing Temp Mullion Footage / 3, 1 Per Perim. Trim Clip, 2 Per Glazing Temporary Jamb Fixing Washer Jamb Mullion Footage / 3 Interface Corner Screw - SSI, SSIT Per DLO Perimeter Trim to Clip Fixing Screw Per Vertical Perimeter Trim Part Drill Fixture (Vertical Prep.) As Required Interface Tape Square Per DLO (SSI / SSIT) NOTE: For other applications and accessories, reference shop drawings, installation instructions and Kawneer's website at
6 6 PERIMETERS - HEAD SEPTEMBER, 2017 E.C Screw Spline (SS) SEALANT AND BACK-UP ROD BY OTHERS SSG TAPE 1 1/8" VARIES PER PROJECT Screw Spline Interface (SSI) Screw Spline Interface Tape (SSIT) " 1"
7 SEPTEMBER, 2017 E.C PERIMETER - SILL 7 Screw Spline (SS) SSG TAPE SEALANT AND BACK-UP ROD BY OTHERS 3/8" DIA" WEEP TUBE BY OTHERS 1 1/8" SHIMS AS REQUIRED BY OTHERS Screw Spline Interface (SSI) 1" 1" Screw Spline Interface Tape (SSIT)
8 8 PERIMETER - JAMB SEPTEMBER, 2017 E.C Left Jamb Shown, Right Jamb Opposite Screw Spline Interface (SSI) Screw Spline (SS) SSG TAPE SEALANT AND BACK-UP ROD BY OTHERS Screw Spline Interface Tape (SSIT)
9 SEPTEMBER, 2017 E.C INTERMEDIATES - HORIZONTALS 9 1 1/8" Screw Spline (SS) 2 1/2" 5/8" Screw Spline Interface (SSI) 1" 1" Screw Spline Interface Tape (SSIT)
10 10 INTERMEDIATES - VERTICALS SEPTEMBER, 2017 E.C Screw Spline (SS) (5-1/4" MULLION) SPLICE SLEEVE AS REQUIRED (3-3/4" MULLION) SPLICE SLEEVE AS REQUIRED 5/8" Screw Spline Interface (SSI) 2 1/2" Screw Spline Interface Tape (SSIT)
11 AUGUST, 2017 ANCHOR CHART 11 PART NUMBER To be used with Mullion Depth / / /4" 5 1/4" MULLION ANCHOR ACCESS HOLES IN HORIZONTAL FASTENER PREPS ANCHOR
12 12 90 CORNERS - SS AUGUST, Inside Corner Shallow system shown, deep system similar HEAD SILL Deep System Reference T ANCHOR HEAD SILL HEAD SILL Outside Corner T ANCHOR HEAD SILL HEAD AND SILL
13 SEPTEMBER, 2017 E.C CORNERS - SSI Inside Corner Shallow system shown, deep system similar HEAD SILL Outside Corner HEAD SILL HEAD AND SILL T ANCHOR See sheet 12 for deep system reference
14 14 90 CORNERS - SSIT SEPTEMBER, 2017 E.C Inside Corner Shallow system shown, deep system similar HEAD SILL HEAD SILL Outside Corner HEAD AND SILL T ANCHOR See sheet 12 for deep system reference
15 AUGUST, 2017 ENTRANCE DETAILS 15 Screw Spline (SS) shown, SSI and SSIT similar
16 16 ANCHOR ASSEMBLY AUGUST, 2017 Intermediate Wind Load Mid-Anchor Details FOR ALTERNATE DETAIL CONDITION CONSULT FACTORY MULLION VARIES TEMPORARY SEPARATOR ANCHORS REQUIRED EACH SIDE OF MULLION SLIP WASHER WIND LOAD THRU BOLTS AS REQUIRED
17 AUGUST, 2017 CLEARWALL SB - VERTICALS 17 Clearwall SB shown, Clearwall SBI and Clearwall SBIT similar Kawneer Company, Inc., 2011
18 18 CLEARWALL SB - HORIZONTALS AUGUST, 2017 ADJUST PERIMETER JOINT FOR EXPANSION T-ANCHOR F ANCHOR Clearwall SB shown, Clearwall SBI and SBIT similar T-ANCHOR F ANCHOR USE CLIP AT LAST BAY HORIZONTAL Kawneer Company, Inc., 2011
19 AUGUST, 2017 NOTES 19 Kawneer Company, Inc., 2011
20 20 NOTES AUGUST, 2017 Kawneer Company, Inc., 2011 KAWNEER COMPANY, INC. TECHNOLOGY PARK/ATLANTA 555 GUTHRIDGE COURT NORCROSS, GEORGIA 30092
ESTIMATING/TAKE-OFF AND ORDERING GUIDE
MAY, 2017 1600 WALL SYSTEM 1 CURTAIN WALL 1 ESTIMATING/TAKE-OFF AND ORDERING GUIDE 2 1600 WALL SYSTEM 1 CURTAIN WALL MAY, 2017 INDEX PAGE PART IDENTIFICATION ------------------------------------------------------------
More information1600 WALL SYSTEM 2 ESTIMATING/TAKE-OFF AND ORDERING GUIDE (16 Pages) E.C.# (09/09/13)
1600 WALL SYSTEM 2 ESTIMATING/TAKE-OFF AND ORDERING GUIDE 162-904 (16 Pages) E.C.#95449-095 (09/09/13) KAWNEER COMPANY, INC., 2006 1600 WALL SYSTEM 2 INDEX PAGE PARTS IDENTIFICATION ---------------------------
More informationPART IDENTIFICATION...
2 1600 WALL SYSTEM 4 INDEX JUNE, 2010 E.C. 95468-36 PAGE PART IDENTIFICATION............................. 3, 4 MATERIAL TAKE-OFF GUIDE....................... 5 PERIMETER DETAILS..............................
More informationInstallation Instructions
Installation Instructions 400SS Series Curtainwall 3056 WALKER RIDGE DR. NW, SUITE G WALKER, MI 49544 800-866-2227 dependable@tubeliteinc.com Revised June 2016 dependable@tubeliteinc.com Page 1 TABLE OF
More information14 Product Selection Guide
14 Selection Guide 1600 Wall System TM 1 1600 Wall System TM 2 1600 Wall System TM 3 1600 Wall System TM 4 Catalog Section s s s s Sightline 2-1/2" 2-1/2" 2-1/2" 2-1/4" Depths 6", 7-1/2" 6", 7-1/2" 6",
More informationProduct Selection Guide
14 Selection Guide JULY, 2015 1600 Wall System TM 1 1600 Wall System TM 2 1600 Wall System TM 3 1600 Wall System TM 4 Catalog Section s s s s Sightline 2-1/2" 2-1/2" 2-1/2" 2-1/4" Depths 6", 7-1/2" 6",
More informationTABLE OF CONTENTS: HURRICANE RESISTANCE STOREFRONT SERIES IT600 REVISION D E S C R I P T I O N HURRICANE RESISTANT STOREFRONTS CRL / US ALUMINUM
TABLE OF CONTENTS: SHEET DWG D E S C R I P T I O N REVISION 1 2 3 4 HURRICANE RESISTANCE STOREFRONT 1 1.00 COVER 2 1.01 ELEVATION, PLAN AND SECTION 3 1.02 ELEVATION, PLAN AND SECTION 4 1.03 ELEVATION,
More informationSPECIAL NOTES: EXCLUSIONS: THE FOLLOWING ITEMS ARE NOT SUPPLIED - SEE SEPARATE SAMPLES FOR GLASS MAKE UP.
SPECIAL NOTES: - SEE SEPARATE SAMPLES FOR GLASS MAKE UP. A/C ACCESS CONTROLLED A.F.F. C L B.O.M. DIM. D.L.O. D.L. D.O. EL. F.D. F.F. G.C. ABOVE FINISHED FLOOR BOTTOM OF MULLION CENTER LINE DIMENSION DAYLIGHT
More informationSeries Silicone structural glazed. Installation Instructions
Series 5600 Silicone structural glazed Installation Instructions Part NO. Y306 May 2016 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines 3-4 II. Perimeter Applications. 5 III. Anchor Installation.
More informationapexfacades.com apexfacades.com. Keystone Pg- 1
1.866.970.5948 apexfacades.com apexfacades.com K E Y S T O N 1.2E H I G H 5 0 0 P E R F O R M A N C E Keystone Pg- 1 2 C U R T A I NPrintedW A L L on 04/03/18 THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com
More informationINSTALLATION INSTRUCTIONS 2-1/2 x 7-5/16 for 1-5/16 Glass
INSTALLATION INSTRUCTIONS 2-1/2 x 7-5/16 for 1-5/16 Glass -- Wet and Dry Glazed Captured System (Shown) June 2012 3010 Rice Mine Road, Tuscaloosa, Alabama 35406 1-800-772-7737 Fax 1-800-443-6261 www.coralind.com
More informationSeries Silicone structural glazed curtain wall. Installation instructions
Series 5900 Silicone structural glazed curtain wall Installation instructions Part NO. Y354 July 2015 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines.. 3-4 II. Perimeter Application..... 5-6
More informationSIGNATURE SERIES UNIT WALL
SIGNATURE SERIES UNIT WALL Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! 01 TABLE OF CONTENTS SHEET GENERAL INFORMATION Product Use Protection and Storage Check Material
More informationSeries Outside glazed curtain wall. Installation instructions
Series 5900 Outside glazed curtain wall Installation instructions Part NO. Y350 July 2015 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines 3-4 II. Perimeter Application...... 5-6 III. Anchor
More information200 Singleton Drive Waxahachie, Texas T: F:
200 Singleton Drive Waxahachie, Texas 75165 T: 972-937-9651 F: 972-937-0405 Page 2-D4 United States Aluminum SERIES 4250T AND 4250 CURTAIN WALL TABLE OF CONTENTS PAGE GENERAL NOTES...2-D4 and 3-D4 FRAME
More informationYCW 250 I-Beam Curtain Wall System Installation Manual
Installation Manual 2004 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS INSTALLATION NOTES..................................... Page ii PARTS DESCRIPTION Framing
More informationPINNACLE 600/650 HIGH PERFORMANCE CURTAIN WALL apexfacades.com. apexfacades.com 1.2 Pinnacle Pg- 1. Printed on 12/12/17
1.866.970.5948 apexfacades.com PINNACLE 600/650 apexfacades.com 1.2 Pinnacle Pg- 1 HIGH PERFORMANCE CURTAIN WALL THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.2 Pinnacle Pg- 2 Series Curtain Wall
More informationSERIES 5600PG PREGLAZABLE CURTAINWALL
SERIES 5600PG PREGLAZABLE CURTAINWALL Part Y56P EFCO 2016 Y56P Page 1 Section Page 1. General notes and Guidelines. 3-4 2. Parts Identification.. 5-8 3. Setting and Anchoring Units.... 9-13 4. Horizontal
More informationFlushglaze For Steel Tube Applications and Horizontal Panels. Façades Installation Guide
Flushglaze 7500 For Steel Tube pplications and Horizontal Panels Façades Installation Guide September 2016 BENCHMRK Welcome to Kingspan, global leaders in the design and manufacture of insulated metal
More informationArchitectural Testing ASTM E283, ASTM E330, ASTM E331 TEST REPORT. Report Number: C Rendered to: Tubelite Inc.
Architectural Testing ASTM E283, ASTM E330, ASTM E331 TEST REPORT Report Number: C0271.01-450-44 Rendered to: Tubelite Inc. Walker, Michigan MODEL DESIGNATION: 400 Series Curtainwall with 4 Sided SSG PRODUCT
More informationNote: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! FEBRUARY 2012
Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! TABLE OF CONTENTS General Information Building Codes Structural Sealants Perimeter Sealants Material Handling Cleaning Materials
More informationSERIES 487 CENTER GLAZED SLIDING DOOR WITH 1-1/2" TRIM
INSTALLATION INSTRUCTIONS SERIES 487 CENTER GLAZED SLIDING DOOR WITH 1-1/2" TRIM Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0200 GENERAL INSTALLATION NOTES Recommended
More informationFG/FT-451 S T O R E F R O N T. 2 x 4 1/2 THERMAL & NON THERMAL WALL DETAILBOOK TRULITE GLASS & ALUMINUM SOLUTIONS TM
FG/FT-451 B6 S T O R E F R O N T 2 x 4 1/2 THERMAL & NON THERMAL WALL DETAILBOOK TRULITE GLASS & ALUMINUM SOLUTIONS TM FG451 & FT451 FRAMING ( x 4-1/) C2-ELEV FG451/FT451 SYSTEM HIGHLIGHTS x 4 1/ FRAMING
More information7000 Series Curtain Wall Information Specifications
7000 Series Curtain Wall Information Specifications Information All framing members shown in this section, unless noted otherwise, are stock items in dark bronze or clear anodic coatings and are available
More informationSERIES 4250/4250T CURTAIN WALL
INSTALLATION INSTRUCTIONS SERIES 4250/4250T CURTAIN WALL Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com 11M0181 HANDLING, STORAGE, AND PROTECTION OF The following precautions
More informationSERIES ET350 STRIP WINDOW SYSTEM
INSTALLATION INSTRUCTIONS SERIES ET350 STRIP WINDOW SYSTEM Phone: (800) 262-5151 Fax: (866) 262-3299 crlaurence.com usalum.com crl-arch.com 11M0297 HANDLING, STORAGE, AND PROTECTION OF ALUMINUM The following
More informationSWING DOOR SPECIFICATION
SWING DOOR A1 Work included: Furnish all necessary materials, labour and equipment for the complete installation of aluminum entrance doors, door frames and hardware as detailed on the drawings and specified
More informationBallard Avenue Retail/Office Building For Lease
Ballard Avenue Retail/Office Building For Lease 50-5 Ballard Avenue NW, Seattle, WA 9807,850 SF Retail/Office space for lease with great visibility in downtown Ballard Prime location with over 5 feet of
More informationMETL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL
METL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL TEchnical bulletin PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY CONTENTS DETAIL TITLE FILE NO. PAGE NO. INTRODUCTION.......................................................................
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Report No.: A Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: A2653.02 401 44 Rendered to: CORAL ARCHITECTURAL PRODUCTS Tuscaloosa, Alabama PRODUCT TYPE: Curtain Wall SERIES/MODEL: PW257 Captured
More informationSECTION ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS
SECTION 08 4113 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Aluminum entrance doors and frames. 2. Glass infill panels. 3. Door hardware. B. Related Sections:
More informationC.R. Laurence Co., Inc. Los Angeles, California
TEST REPORT: AAMA 501-05 Performance and ASTM E 1996-09 and ASTM E 1886-05 Impact and Cyclic Test Report C. R. Laurence Co., Inc. Series: StormWall L Product/Type: SSG Twin Span Curtain Wall Test Date:
More informationTMW 450 TECHNICAL MANUAL
ARCHITECTURAL METALS, INC. TMW 450 TMW 450 TECHNICAL MANUAL TMW 450 ARCHITECTURAL METALS, INC. BLANK PAGE FEATURES ARCHITECTURAL METALS, INC. TMW 450 FEATURES TMW 450 is 6 3/4" deep with a 2" wide sightline
More informationCOMPOSITE PANEL SYSTEM SYSTEM OVERVIEW INDEX INSTALLATION SEQUENCE INSTALLATION SEQUENCE INSTALLATION SEQUENCE
COMPOSITE PANEL SYSTEM SYSTEM OVERVIEW INSTALLATION SEQUENCE TT 5-8 TT- 13 INSTALLATION SEQUENCE INSTALLATION SEQUENCE TT- 4 TT-10 TT-14 TT-12 TT- 3 TT-11 TT-10 TT- 9 TT-11 TT- 2 INDEX (TT- 0): SYSTEM
More informationDuracast Pressure Plate Installation Instructions
July 2015 EFCO CORPORATION 7/2015 PART NO. YW45 1 TABLE OF CONTENTS SECTION S-5600 / S-5900 DURACAST PRESSURE PLATE PAGE I. General Notes and Guidelines. 3-4 II. Glazing Preparation & Installation... 5
More informationSystem Thermal Clip Storefront System
Windows Curtain Walls Entrances Storefronts System 960 1 3 4 Thermal Clip Storefront System Configurations Shear Block Screw Spline System 960 has a face dimension of 1 3/4 and system depths from 2 3/4
More informationSECTION E INDEX CURTAINWALL FRAMING SYSTEMS
SECTION E INDEX CURTAINWALL FRAMING SYSTEMS E PAGE DESCRIPTION 0 CURTAINWALL FRAMING SPECIFICATION 0 SERIES /" () WIDE THERMALLY IMPROVED CURTAIN WALL FRAMING SYSTEM FOR SEALED UNIT GLAZING. 00 SERIES
More informationPanel Clip with (2) ¼ 14 x 2 Fasteners at Each Panel Joint. Base Angle. Fasteners to Concrete 24 O/C Base Z Flashing
EXTERIOR BASE DETAIL (FLUSH) EXTERIOR BASE DETAIL (OVERHANG) Base Trim with Panel Clip with (2) ¼ 14 x 2 Fasteners at Each Panel Joint Sealant Marriage Bead to Vertical Panel Joint Above and Below Z Flashing
More informationTMS 152 / 152T / 152XT TECHNICAL MANUAL
TMS 152 / 152T / 152XT TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES TMS 152 (non-thermal), 152T (single thermal barrier), and 152XT (double thermal barrier) are front set flush glazed systems that are
More informationWall Assembly - ACM Metal Panel at Steel Stud Framing SCALE: 3" = 1'-0"
Thermafiber "RainBarrier 45" Nvelope "NH2" Bracket Adapter Nvelope Wall Bracket (90mm or as Req'd) ACM Metal Panel System Metal Panel Extrusion per ACM Manufactuer 1 2 " Self-Drilling Stainless Steel Fastener
More informationKS SERIES - VERTICAL INSTALLATION
CS-DS-01-KSV CS DISCLAIMER CS-PP-01-KSV PANEL PROFILES CS-PP-02-KSV PANEL PROFILES CS-PP-03-KSV PANEL PROFILES CS-PJ-01-KSV KS SERIES EXPANDED PANEL JOINT CS-PJ-02-KSV KS SERIES ENGAGED PANEL JOINT CS-PJ-03-KSV
More informationT SERIES WINDOW SPECIFICATIONS
SPECIFICATIONS Part 1 - GENERAL Scope The framing shall be Metro "T" Series fixed window system with thermal break as manufactured by Metro Glass. Furnish all materials, labour, and services for the complete
More informationSECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 08 51 69.11 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
More informationTMS 114 XT TECHNICAL MANUAL
TECHNICAL MANUAL BLANK PAGE FEATURES FEATURES is center set flush glazed systems that are 4 1/2" deep with a 2" wide sightline Glaze from the outside or inside Screw spline or shear block fabrication Glazing
More informationYOW 250 T Window System
MegaTherm Glass Fiber With 6/6 Nylon Thermal Break YOW 250 T SYSTEM DESCRIPTION YOW 250 T PERFORMANCE FEATURES 2-1/2 Overall Depth MegaTherm Thermal Break Separate Interior/Exterior Finish Options Variations:
More informationSECTION B3 SERIES COS451 FRONT GLAZED STACKING SYSTEM
SECTION B SERIES COS51 FRONT GLAZED STACKING SYSTEM for STOREFRONT / WINDOW WALL x ½ for 1 GLASS ARCHITECTURAL DETAILS EXTERIOR GLAZED Effective October 01 www.cardcompro.com 1 INTERIOR GLAZED www.cardcompro.com
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Extruded aluminum windows with fixed sash..2 Factory glazed..3 Perimeter sealant. 1.2 RELATED SECTIONS.1 Section 05500 - Metal Fabrications.2
More informationYES SSG TU Vent Window System
YES SSG TU VENT SYSTEM DESCRIPTION 3-1/2" Overall Depth Flat and Pocket Frame Options Variations: Casement Outswing Projected Outswing 1" Glazing Optional Screens YES SSG TU VENT PERFORMANCE FEATURES AAMA/WDMA/CSA
More informationArchitectural Wall Products Guide Specifications
Western States Metal Roofing 901 W. Watkins St. Phoenix, AZ 85007 PH: 602-495-0048 FX: 602-261-7726 Architectural Wall Products Guide Specifications FORMED METAL WALL PANELS This Guide Specification is
More informationSECTION ALUMINUM ENTRANCES AND STOREFRONTS. A. Section Includes: Aluminum doors and window wall frames.
SECTION 08410 ALUMINUM ENTRANCES AND STOREFRONTS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Aluminum doors and window wall frames. B. Related Sections: 1. Section 08480 Balanced Doors 2. Section
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Cast
More informationPatent No. 9,045,900 Technical Glass Products Architectural Specification Manual
Technical Glass Products Architectural Specification Manual 800.426.0279 fireglass.com FIREFRAMES ALUMINUM SERIES INTERIOR APPLICATION ONLY Fireframes Aluminum Series combined with Pilkington Pyrostop
More informationGuardian Wall Panel Installation Manual
Guardian 275 4 Wall Panel Installation Manual Guardian 275 4 Wall Panel Installation Manual This instructional manual provides General Installation Instruction. Installers should refer to the "as-built"
More informationSECTION STAINLESS STEEL WALL PANELS
SECTION 07400 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Dry joint, Rainscreen stainless steel wall panel system. 2. Accessories including attachments, clips, sub girts, shims, and fasteners 3.
More information2-1/4" Flush Projected Architectural Thermal Aluminum Windows. Project In TR-2400 (AW-PG80-AP) or Project Out TR-2500 (AW-PG80-AP)
2-1/4" Flush Projected Architectural Thermal Aluminum Windows Project In TR-2400 (AW-PG80-AP) or Project Out TR-2500 (AW-PG80-AP) TR-2000 Series Thermal Windows Durability, Adaptability and Thermal Performance
More informationFACADES - ACM BASE AT OVERHANG (WITH BASE FLASHING) INDEX SHEET
KPH-DS-01-MTLV KPH-PJ-01-MTLV KPH-PJ-02-MTLV KPH-PJ-03-MTLV KPH-PJ-04-MTLV KPH-PJ-05-MTLV KPH-BS-01-MTLV KPH-BS-02-MTLV KPH-BS-03-MTLV KPH-BS-04-MTLV KPH-OC-01-MTLV KPH-IC-01-MTLV KPH-SF-01-MTLV KPH-SF-02-MTLV
More informationPERFORMANCE TEST REPORT. Rendered to: TREMCO INC. SERIES/MODEL: Proglaze ETA - System 3 PRODUCT TYPE: Pre-Engineered Air Barrier Transition Assembly
PERFORMANCE TEST REPORT Rendered to: TREMCO INC. SERIES/MODEL: Proglaze ETA - System 3 PRODUCT TYPE: Pre-Engineered Air Barrier Transition Assembly Title Summary of Results Air Infiltration
More informationKARRIER PANEL - BRICK
KPH-DS-01-BRICK KPH-PJ-01-BRICK KPH-PJ-02-BRICK KPH-PJ-03-BRICK KPH-BS-01-BRICK KPH-BS-02-BRICK KPH-BS-03-BRICK KPH-OC-01-BRICK KPH-FO-01-BRICK KPH-FO-02-BRICK KPH-FO-03-BRICK KPH-FO-04-BRICK KPH-FO-05-BRICK
More informationProject: U.S. Federal Courthouse, Coeur d Alene, ID
0- ALUMIUM Table of Contents BLAST MITIGATIO SECTIO PAGE SPECIFICATIOS...0- and 0- TECHICAL DATA...04- SPECIAL FEATURES...05- TYPICAL DETAILS...0- thru 08- TYPICAL DETAILS FOR MID-SPA ACHORS AD MULLIO
More information4-5/8" Offset Projected Architectural Thermal Aluminum Windows. Project In TR-740 (AW-PG80-AP) or Project Out TR-750 (AW-PG80-AP)
4-5/8" Offset Projected Architectural Thermal Aluminum Windows Project In TR-740 (AW-PG80-AP) or Project Out (AW-PG80-AP) TR-700 Window Wall Multifaceted Window System for Flexible Design The Admiral at
More informationTEST REPORT. Report No.: G Rendered to: CR LAURENCE CO., INC. Vernon, California
TEST REPORT Report No.: G9949.01-303-47 Rendered to: CR LAURENCE CO., INC. Vernon, California PRODUCT TYPE: Fixed Lite Storefront System SERIES/MODEL: IT451 Title Summary of Results Design Pressure ±1440
More informationThis Addendum forms part of the Tender Documents and amends the Tender Documents as described below.
BRAMALEA SECONDARY SCHOOL ARCHITECTURAL ADDENDUM NO. 1 ADULT EDUCATION - CLASSROOM & OFFICE RENOVATIONS PEEL DISTRICT SCHOOL BOARD Tender No. L18-4165 February 23, 2018 This Addendum forms part of the
More informationSECTION COMPOSITE WALL PANELS PART 1 GENERAL 1.01 SECTION INCLUDES
SECTION 07 4243 - PART 1 GENERAL 1.01 SECTION INCLUDES A. Composite wall panel system consisting of aluminum-faced composite panels in a rainscreen application as part of the assembly described below.
More information2018 Special-Lite ALUMINUM FRAMING
201 Special-Lite ALUMINUM FRAMING Framing Aluminum Framing Better materials and construction make our framing more durable. The frame is the foundation of any entrance. It must be capable of holding the
More informationIce Rink Renovation & New Clubhouse
SECTION 074243- METAL COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationStudent Services & Classroom Addition
SECTION 074243 - METAL COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationAluminum-Framed Entrances and Storefronts
University of New Hampshire University of New Hampshire Scholars' Repository Division 08 Openings Chapter 5 Technical Construction and Renovation Standards 1-25-2013 084113 - Aluminum-Framed Entrances
More informationSTOREFRONT, CURTAINWALL & ENTRANCES
2007 STOREFRONT, CURTAINWALL & ENTRANCES 14.02 14000 Series Flush Glaze Guide Specifications General Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum
More informationMARLIN WINDOWS, INC 3500 HC SERIES 3 3 8" SLIDING WINDOW PAGE 1
PAGE 1 SPECIFICATIONS GENERAL Sliding windows shall be Marlin series #3500-HC (thermally improved) as manufactured by Marlin windows, and shall conform to ANSI/AAMA 101-88 HS-HC40. Series #3500 shall have
More informationProject: U.S. Federal Courthouse, Coeur d Alene, ID
0- ALUMIUM Table of Contents BLAST MITIGATIO SECTIO PAGE SPECIFICATIOS...0- and 0- TECHICAL DATA...04- SPECIAL FEATURES...05- TYPICAL DETAILS...0- thru 08- TYPICAL DETAILS FOR MID-SPA ACHORS AD MULLIO
More informationPella 250 Series. Wood Frame Construction with Vinyl Siding... V250-ID-888 Wood Frame Construction with Brick Veneer...
SECTION DIRECTORY General Information Introduction... V250-ID-886 Installation Accessories and Applications... V250-ID-886 Typical Sealant Placement Details... V250-ID-887 Fin Installation Details Wood
More informationDivision 8 Section "Flush Wood Doors" for louvers in wood doors. Division 15 Sections for louvers that are a part of mechanical equipment.
0 0 0 0 0 SECTION 000 - LOUVERS AND VENTS PART GENERAL RELATED DOCUMENTS EASTLAKE FIRE STATION REPLACEMENT HILLSBOROUGH COUNTY CIP # Drawings and general provisions of the Contract, including General and
More informationTEST REPORT. Report No.: G Rendered to: C.R. LAURENCE CO., INC. Vernon, California
TEST REPORT Report No.: G6910.01-303-47 Rendered to: C.R. LAURENCE CO., INC. Vernon, California PRODUCT TYPE: Side Hinged Door - Outswing SERIES/MODEL: 925 Title Summary of Results Design Pressure ±2640
More informationELEVATION FOR DETAIL REFERENCE ONLY
#smr_elev 5b SEC 2 8i SEC 2 33 SEC 4 1a SEC 2 37 SEC 4 36 SEC 4 35 SEC 4 SOFFIT FRONT 6d SEC 2 7a SEC 2 SOFFIT REAR INSIDE CORNER (REAR) OUTSIDE CORNER (FRONT) 10a SEC 2 9b SEC 2 4e SEC 2 ELEVATION FOR
More informationA. Pre-Installation Conference: Conduct conference at [project site] <insert location>.
SECTION 074213.23 METAL COMPOSITE MATERIAL WALL PANELS PART 1 GENERAL 1.1 SUMMARY A. Exterior cladding consisting of formed metal composite material (MCM) sheet, secondary supports and anchors to structure,
More informationRAMAPO COLLEGE OF NEW JERSEY PHASE II HOUSING REHABILITATION C 2012
SECTION 10200 - LOUVERS AND VENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationInstallation Guide and Safety Manual Resilient Sound Isolation Clips (SIC Clips)
Installation Guide and Safety Manual Resilient Sound Isolation Clips (SIC Clips) SOUND ISOLATION CLIP SPECIFICATIONS Width...1.00 inch Height...1.06 inch Length...3.86 inch Weight....025 lbs Max Spacing...48
More informationSpecification Section Storefront Systems has been revised. Omit previously issued Storefront section.
December 28, 2018 ADDENDUM NO. 2 To: Re: Bidders Corey Pitts, NewQuest Properties This Addendum forms a part of the contract documents identified above. Acknowledge the receipt of this Addendum on the
More information12 - V0 CFP-12 PANEL INDEX. Delta Series CONCEALED FASTENED PANELS BUILDING PRODUCTS VERTICAL PANELS
CONCEALED FASTENED PANELS CFP-12 PANEL INDEX 12 - V0 BASE DETAILS HORIZONTAL JOINT DETAIL PARAPET ROOF DETAIL INSIDE CORNER DETAIL OUTSIDE CORNER DETAIL SOFFIT DETAIL WINDOW JAMB DETAIL WINDOW HEAD DETAIL
More information200 / 300 SERIES PANELS COLD STORAGE
CS-DS-01-200/300 DISCLAIMER CS-CD-01-200/300 KINGSPAN CEILING DESIGN POLICY AND PROCEDURES CS-CD-02-200/300 KINGSPAN CEILING DESIGN POLICY AND PROCEDURES CONTINUED CI-PP-01-200 PANEL PROFILES 200 SERIES
More informationMR2 SERVICES Site Reconstruction 54 College Street Des Moines, IA
Existing Yard Security Light Proposed Rooftop Mechanical Screening (Slate Gray) Proposed 3 x4 x 4 x4 Windows Metal Awning Existing Doors Metal Siding(Slate Gray) Trim (Matte Black) 14 14 Proposed Addition
More informationInstruction and Safety Manual Resilient Sound Isolation Clips (SIC Clips)
SOUND ISOLATION CLIPS Installation Manual Instruction and Safety Manual Resilient Sound Isolation Clips (SIC Clips) SOUND ISOLATION CLIP SPECIFICATIONS Width...1.00 inch Height...1.06 inch Length...3.86
More informationSECTION ALUMINUM COMPOSITE MATERIAL WALL PANELS. A. Section includes aluminum composite material wall panels.
1/11 SECTION 074213.23 - ALUMINUM COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section includes aluminum composite material wall panels. 1.2 PRE-INSTALLATION MEETINGS A. Pre-installation
More informationInstallation Guide and Safety Manual Resilmount A237R (Resilient Sound Isolation Clips)
Installation Guide and Safety Manual Resilmount A237R (Resilient Sound Isolation Clips) 3" RESILMOUNT A237R SPECIFICATIONS 1d " f" Width...1.375 inch Height...3.25 inch Depth...1.125 inch Weight....025
More informationCentral Dartmouth Section Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Dartmouth, NS
Exterior Envelope Renovations METAL-CLAD WOOD DOORS Page 1 of 5 Part 1 General 1. RELATED SECTIONS 1. Section 07 92 10 Joint Sealing 2. Section 08 71 00 Door Hardware 2. REFERENCES 1. American Society
More informationSECTION C1. SERIES CWW451T THERMALLY BROKEN FRONT GLAZED WINDOW WALL / STOREFRONT SYSTEM 2" X 4 1 /2" for 1" GLAZING ARCHITECTURAL DETAILS
SECTION C1 SERIES CWW51T THERMALLY BROKEN FRONT GLAZED WINDOW WALL / STOREFRONT SYSTEM " X 1 /" for 1" GLAZING ARCHITECTURAL DETAILS EXTERIOR GLAZED Effective October 01 www.cardcompro.com 1 INTERIOR GLAZED
More informationSECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
More informationHORIZONTAL SLIDER SERIES 700. Main Frame Depth: 2 3/4 Glazing Thickness (Maximum): 5/8 Thermal Break:
GUIDE SPECIFICATION Boyd Aluminum Manufacturing Company P.O. Box 1565 3248 E. Division Street Springfield, MO 65801-1565 800-737-2800 417-862-1232 fax boydaluminum.com HORIZONTAL SLIDER SERIES 700 Main
More informationSECTION GYPSUM BOARD
SECTION 09250 GYPSUM BOARD PART 1GENERAL 1.1 SUMMARY A. Related Documents: General and Supplementary Conditions of the Contract, Division 1 - General Requirements, and Drawings are collectively applicable
More informationALUMINUM (800) (866) BLAST MITIGATION. BR604/BR606/BT601 Storefront BR7500/BW7600/BW8000 BW8100/BW8200 Windows Accessory Hardware
BLAST MITIGATION BR60/BR606/BT601 Storefront BR700/BW7600/BW8000 BW8/BW800 Windows Accessory Hardware Toll ree Phone Service (800) 6-11 Toll ree ax Service (866) 6-99 U.S. and Canada usalum.com BLAST MITIGATION
More informationProject: North Charleston City Hall, North Charleston, SC
0- ALUINU Table of Contents STOR WALL Series IW50 SECTION PAGE SPECIFICATIONS...0- and 0- TECHNICAL DATA...04- SPECIAL FEATURES...05- TYPICAL DETAILS FOR 7/6" () GLAZING...06- TYPICAL DETAILS FOR -/6"
More informationA. Pre-Installation Conference: Conduct conference at [project site] <insert location>.
SECTION 074213.23 METAL COMPOSITE MATERIAL WALL PANELS PART 1 GENERAL 1.1 SUMMARY A. Exterior cladding consisting of formed metal composite material (MCM) sheet, secondary supports and anchors to structure,
More informationWindow Installation Instructions Fixed Systems with Subframes
STANDARD PROCEDURE No. I-103 Window Installation Instructions Fixed Systems with Subframes Examined, Accepted and Approved By: D Ray VanNess Title: President SUBJECT: Window Installation Instructions Page
More informationRS32 Multi-Section Skylight System under/over seam clip double diverter
INSTALLATION INSTRUCTIONS RS32-x RS32 Multi-Section Skylight System under/over seam clip double diverter www.rnssales.com sales@rnssales.com 805.375.3980 Fax 805.375.3981 SKYLIGHT ACRYLIC skyline series
More informationSPECIFICATION For the Supply and Installation of BRITAL UN Four Sided Unitized Structurally Glazed Curtain Walling
SPECIFICATION For the Supply and Installation of BRITAL UN-4-76 Four Sided Unitized Structurally Glazed Curtain Walling Issue date Revision Comment 07/05/09 R0 Draft 11/05/09 R1 Approved for Issue R1 Amended
More informationWindow Installation Instructions Hung Window Systems with Receptor Pan
STANDARD PROCEDURE No. I-110 Window Installation Instructions Hung Window Systems with Receptor Pan Examined, Accepted and Approved By: D Ray VanNess Title: President SUBJECT: Window Installation Instructions
More informationMETAL COMPOSITE MATERIAL WALL PANELS
MasterSpec Full Length 1 of 10 SECTION 074213.23 - METAL COMPOSITE MATERIAL WALL PANELS PART 1 - GENERAL 1.1 SUMMARY A. Section includes metal composite material wall panels. 1.2 PREINSTALLATION MEETINGS
More informationInstallation Guide and Safety Manual
Installation Guide and Safety Manual Resilmount A237R (Resilient Sound Isolation Clips) REQUIRED FURRING CHANNEL REQUIRED FURRING CHANNEL* 1 4" 2 2" Minimum f" Gauge:...25 Gauge With Hemmed Edge (Do Not
More informationTEST REPORT. Report No.: E Rendered to: INTERNATIONAL WINDOW Fullerton, California
TEST REPORT Report No.: E5564.01-301-44 Rendered to: INTERNATIONAL WINDOW Fullerton, California PRODUCT TYPE: Sliding Glass Door (XXO) SERIES/MODEL: 8880 SPECIFICATION(S): AAMA/WDMA/CSA 101/I.S.2/A440-11,
More information