Refuse Systems & Hoggers
|
|
|
- Randall Robertson
- 6 years ago
- Views:
Transcription
1 Refuse Systems & oggers
2 Table of ontents Section escription Page oard Mills... 4 Sidewinder oggers oard Miils... 5 luminum oggers Step one oggers... 8 Straight Refuse ogger... 9 New eneration ogger...10 Spare Parts for oggers...11 Saw lades Leuco oggers...12 ndex Optional tems ores over one ore ubs and Trepans (up to 1 ) ubs and Trepans (over 1 to 2 ) Mounting oles (qty. 1-6) Mounting oles (qty. 7-12) eyways (Standard) ubs and Trepans (over 2 to 4 ) Sleeve ore North merica s largest carbide & diamond cutting tool manufacturer. 237
3 oard Mills Replacement Trim Saws Product No. Number of Teeth lade iameter TS " TS " Replacement Spare Parts Product No. S - roach Segments SN - Non roach Segments S - Segment Screws 5/16"-18 x 5/8" SS S - Trim Saw Screws 1/4"-20 x 5/8" SS ogger Sections - with Trim Saws (roached & Non-roached) Part No. ogger iameter - Large ore Size Section Width Number Segments T 14.17" specify 1.5" T 14.17" specify 1.5" 10 ogger dder Sections - without Trim Saws (roached & Non-roached) Part No. ogger iameter - Large ore Size Section Width Number Segments " specify 1.5" " specify 1.5" ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)
4 Patented Sidewinder ogger oard Mills Replacement Trim Saws Product No. Number of Teeth lade iameter TS " Replacement Spare Parts Product No. SS - Sidewinder nsert Screws NS-0039 S - Trim Saw Screws 1/4"-20 x 5/8" SS Protected by the following patents: US # US # US # Pat. Pend. in other countries 8 & 10 Wing ogger Sections - with Trim Saws Part No. ogger iameter - Large Wings ore Size utting Width No. of nserts S T 14.68" 8 specify 1.36" 24 S T 14.68" 8 specify 1.74" 32 S T 14.68" 8 specify 2.13" 40 S T 14.68" 8 specify 2.51" 48 S T 14.68" 8 specify 2.90" 56 S T 14.68" 8 specify 3.28" 64 S T 14.68" 8 specify 3.67" 72 S T 14.68" 8 specify 4.05" 80 S T 14.68" 8 specify 4.44" 88 S T 14.68" 10 specify 1.36" 30 S T 14.68" 10 specify 1.74" 40 S T 14.68" 10 specify 2.13" 50 S T 14.68" 10 specify 2.51" 60 S T 14.68" 10 specify 2.90" 70 S T 14.68" 10 specify 3.28" 80 S T 14.68" 10 specify 3.67" 90 S T 14.68" 10 specify 4.05" 100 S T 14.68" 10 specify 4.44" North merica s largest carbide & diamond cutting tool manufacturer. 239
5 Step one ogger pplications or use on double end tenons, double cut-off and roll feed machines, sizing machines, gang rip machines, and multiple cutting machines To hog off all material into sawdust while simultaneously producing a trim cut dvantages ynamically balanced to reduce vibration ndividual teeth for lower total maintenance cost Replacement Trim Saws Product No. Number of Teeth lade iameter " Technical nformation Laser cut trim saws Trim saws are 3:1 tooth style Standard 72 teeth Utilizes a progression from small diameter trim saw blades to large diameter hogger sections Step one ross ut Part No. Max. iameter Min. iameter utting Width " 10" 3/8" " 10" 3/4" " 10" 1-1/4" #1 S LOW ROP, OVR #3 P S PTUR S RT-N SW L WT TOP TOOT OMN 3 TO 1 TOOT ONURTON lat top tooth configuration on hogger sections. No face shear. oggers have 16 teeth each. The trim saws have a 3:1 tooth style for clean smooth cuts on the keep side of the material. Pictured is a right hand trim saw, top tooth face coming. Trim saws have 72 teeth each. 240 ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)
6 luminum oggers Technical nformation odies are made from aluminum alloy 1 or 1-1/2 wide sections can be bolted together to form various cutting widths Laser cut trim saws Trim saws are 3:1 tooth style (L or R) pplications or use on double end tenon, double cut-off and roll feed machines, sizing machines, gang rip machines, and multiple cutting machines To hog off all material into dust, simultaneously producing a trim cut dvantages Lighter to handle during tool changes Require less horsepower over steel hoggers Segments are easily replaced with allen wrench erodynamics of gullets in segments reduce air turbulence and noise levels ynamically balanced to reduce vibration Replacement Trim Saws Product No. Number of Teeth lade iameter TS " TS " TS " Replacement Spare Parts Product No. S - roach Segments SN - Non roach Segments S - Segment Screws 5/16"-18 x 5/8" SS S - Trim Saw Screws 1/4"-20 x 5/8" SS North merica s largest carbide & diamond cutting tool manufacturer. 241
7 luminum oggers ogger Sections - with Trim Saws (roached & Non-roached) Part No. ogger iameter - Large ore Size Section Width Number Segments T 10.25" specify 1" T 12.12" specify 1" T 12.12" specify 1" T 14.17" specify 1" T 14.17" specify 1" T 10.25" specify 1-1/2" T 12.12" specify 1-1/2" T 12.12" specify 1-1/2" T 14.17" specify 1-1/2" T 14.17" specify 1-1/2" 8 ogger dder Sections - without Trim Saws (roached & Non-roached) Part No. ogger iameter - Large ore Size Section Width Number Segments " specify 1" " specify 1" " specify 1" " specify 1" " specify 1" " specify 1-1/2" " specify 1-1/2" " specify 1-1/2" " specify 1-1/2" " specify 1-1/2" ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)
8 Straight Refuse ogger pplications Used on vertical spindles to size material (ie door sizing machines) dvantages No trim saw used with this system Trepanned for weight reduction Staggered tooth design for reduced cutting pressure and horsepower requirements ndividual teeth for lower total maintenance cost Technical nformation Staggered tooth design head N machined cutter bodies Straight Refuse ogger ead iameter Wings ore Size utting Width 10" /4" 3" 12" /4" 3" 10" /4" 4" 12" /4" 4" Note: dditional cutting widths, diameters, & bore sizes available upon request. TRPNN TO RU WT U OR North merica s largest carbide & diamond cutting tool manufacturer. 243
9 dvanced ogger for arbide or iamond New eneration ogger iameter Range ore Size utting Width 5" - 14" Specify Specify dvantages liminates chipping along and across the grain acilitates the aspiration of the chips Prevents blow-outs in the corners Noise reduction Requires less cutting force ost effective Technical nformation Staggered inserts at multiple diameters an be mounted on quick change system luminum body available for reduced weight our-sided cutting edge knives iamond blade can be used Replacement Parts U.S. Part No. N Part No. escription Torx Screw T-20- T nsert 14 x 14 x 2 Replacement Sawblades for Leuco oggers Part No. iameter Teeth ore Size erf Pin oles Rotation Type of System mm 40Z 80mm 4.0mm W mm 40Z 80mm 4.0mm W * 200mm 60Z 80mm 4.0mm W * 200mm 60Z 80mm 4.0mm W mm 60Z 80mm 4.0mm 6/154/6P W mm 60Z 80mm 4.0mm 6/154/6P W mm 48 80mm 4.0mm W * 250mm 48 80mm 4.0mm W * 250mm 72Z 80mm 4.0mm W Leuco-ogger mm 72Z 80mm 4.0mm W Leuco-ogger * 250mm 72Z 100mm 4.0mm W * 250mm 72Z 100mm 4.0mm W mm 48Z 100mm 4.0mm W mm 48Z 100mm 4.0mm W mm 60Z 80mm 4.0mm W mm 60Z 80mm 4.0mm W *Standard 244 ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)
10 ogger Sawblades and Spare Parts ixmatic lamping System Part No. escription iameter ogger Width ore Size or ogger 200mm ia. 147mm 35mm 35N or ogger 200mm ia. 147mm 40mm 40N Replacement Teeth or oggers Part No. escription Tungsten arbide (2) for natural wood. Per pack of 12 pieces Sawblades or ogger, lat Tooth Part No. iameter Teeth ore Size erf Rotation Type of System mm 44Z 80mm 4.0mm W ixmatic mm 44Z 80mm 4.0mm W ixmatic * 205mm 60Z 80mm 4.0mm W ixmatic * 205mm 60Z 80mm 4.0mm W ixmatic mm 48Z 80mm 4.0mm W mm 48Z 80mm 4.0mm W mm 48Z 100mm 4.0mm W ixmatic mm 48Z 100mm 4.0mm W ixmatic * 255mm 60Z 80mm 4.0mm W * 255mm 60Z 80mm 4.0mm W mm 60Z 100mm 4.0mm W ixmatic mm 60Z 100mm 4.0mm W ixmatic mm 54Z 80mm 3.2mm W mm 54Z 80mm 3.2mm W Replacement saw blades for hoggers on ixmatic rapid clamping system. *Standard North merica s largest carbide & diamond cutting tool manufacturer. 245
Circular Saw Blades. Thin-Kerf Saw Blades 1 1. Gang-Rip Saw Blades 1 3. Trimming Saw Blades 1 7. Sizing Saw Blades 1 9. Panel Sizing Saw Blades 1 19
Circular Saw Blades Product Page Thin-Kerf Saw Blades 1 1 Gang-Rip Saw Blades 1 3 Trimming Saw Blades 1 7 Sizing Saw Blades 1 9 Panel Sizing Saw Blades 1 19 Scoring Saw Blades 1 31 Chop Saw Blades 1 40
Technical information / Clamping system Wedge clamping This classic positive insert clamping system allows the use of all models presenting this geome
Technical information Applications Code key M.02 M.03 M.03 M.04 Cutting data M.06 Tooling rilling & boring CANELA M.01 Technical information / Clamping system Wedge clamping This classic positive insert
Expansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts
MILLING JANUARY Page 1 / 8 Expansion of the HELIDO 690 LINE with Tools Carrying 10 mm Edged Inserts JANUARY Page 2 / 8 Highlights Milling cutters carrying a double-sided triangular insert with six 10 mm
The best of both worlds
The best of both worlds CoroMill 210 the ultimate roughing cutter for modern machining techniques Use CoroMill 210 for plunge milling to mill away large volumes of metal or for high feed milling of flat
Knot Wheel Brushes WHEEL BRUSHES
W HE E L B RU S H E S 4 5 Knot Wheel Brushes Knot Wheel Brushes Knot wheel brushes for grinders, angle grinders and stationary machines used in the preparation and reworking of bolt fillet and butt welds.
Dovetail insert clamping guarantees high productivity
MillLine Tungaloy Report No. 503-US DOTRIPLE-MILL Dovetail insert clamping guarantees high productivity CCELERTED MCHINING MillLine DoForce-Tri is a new series of tools with double-sided triangular insert
Thermowells and Bosses
Thermowells and osses TW, TS, T, TJ and S Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany Tel.: +9 69 8900 98 ax: +9 69 8900 95 ITOK, Inc. 1383 North
ROOF MOUNT KIT OWNERS MANUAL
ROOF MOUNT KIT OWNERS MANUAL Made in the USA by: Primus Wind Power, Inc. 938 Quail St. Lakewood, CO 80215 Phone: (303) 242-5820 www.primuswindpower.com AIR is a trademark of Primus Wind Power, Inc. ROOF
DHC. Differential Helix Cutter
DHC Differential Helix Cutter Universal Short and Long End Mills for the Highest Productivity in Roughing and Finishing Applications (Standard & with Corner Radius) 2 x d 1 x d DHC (Differential Helix
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com BORING TOOLS BORING TOOLS INDEX BORING BARS CARBIDE TIPPED...1
NEW HIGH FEED MILLING CUTTER HIGH FEED MILLING CUTTER 15G1F/5G_F
NEW HIGH FEED MILLING CUTTER 15G1F/5G_F HIGH FEED MILLING CUTTER Very smooth cutting insert geometry -edged inserts 2 different insert geometries in 3 different carbide grades Available as shell-type and
GET HENSLEY XS - CONSTRUCTION SOLUTIONS
GET HENSLEY XS - CONSTRUCTION SOLUTIONS Strength. Durability. Performance. Productivity HENSLEY EXTREME SERVICE EXTREME STRENGTH High performance, lasting value Construction operations worldwide depend
DoveTail Collapsible Cores
ovetail ollapsible ores ovetail ore dvantages Positive mechanically actuated ollapsible ore ollapse amount: 5% to 7% per side Eliminates costly Rack and Gear Systems Enables faster mold cycle times Patented
Keeping the Customer First. Tungaloy Catalogue TE0707-E2. Cutting Tools.
Keeping the Customer First Tungaloy Catalogue TE0707-E2 2007 Cutting Tools www.tungaloy-eu.com Selection Guides List of... 410 Selection Guides... 412 Specifications Solid Carbide s For High Speed Deep
EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS
EUROPEAN PRECISION AND QUALITY SAWS HIGH SPEED STEEL, COBALT & CARBIDE METAL CUTTING SAWS TMX Saws A History of European Quality & Craftsmanship The history of TMX saws dates to 1921 Poland with manufacturing
NC processing centre
NC processing centre When competitiveness means zero adjustments and zero downtime Made In Biesse 2 The market requires a change in production processes to meet the increasing demand for customer specific
COFA. Consistent deburring of even and uneven bore edges, front and back in one operation.
COFA Consistent deburring of even and uneven bore edges, front and back in one operation. Table of Contents Introduction Characteristics and Advantages 3 Applications and Typical Work Pieces 5 Tool Description
AMADA MACHINE TOOLS AMERICA, INC. THE VISION OF PRECISION. Saw Blades
MD MCHINE TOOLS MERIC, INC. THE VISION OF PRECISION Saw lades mada Machine Tools merica Contents mada Machine Tools merica 1 With more than 70 years of industry experience, mada Machine Tools merica is
High Yield Rip Systems
High Yield Rip Systems 130 Salt Point Turnpike Poughkeepsie, NY 12603 Tel: 800.952.1320 Fax: 845.452.0764 www.cameronautomation.com Skew: up to 7,000 board feet per shift Cameron Automation has pushed
BRUKS Drum Chippers.
drum chippers BRUKS Drum Chippers BRUKS Drum Chippers produce high-quality wood chips according to the specifications from various industries. 50 years of continuous development and experience from applications
TOOL NEWS B055A Update. Multi-functional Indexable Cutter APX3000/4000. Holder Expansion. A new generation of high performance cutters.
TOOL NEWS 2015.11 Update Multi-functional Indexable Cutter APX3000/4000 B055A Holder Expansion A new generation of high performance cutters. Multi-functional Indexable Cutter APX3000/4000 Multi functional
HiPos-Alu High-Speed Aluminum Machining
Cutter Styles: End Mill 1AX2K, 1AX2Q Face Mill AX2K, AX2Q Cutter Diameters: 1.000" - 6.000" Inserts Sizes: 16mm 22mm Inserts Radii:.015",.020",.031",.062",.094",.125",.197",.250" Grade: IN10K HiPos-Alu
P o w e r To o l A c c e s s o r i e s
P o w e r To o l A c c e s s o r i e s H O L E S A W S Made in the USA, the Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime
5230VS Series. Chevron Long Edge Milling Cutter (Porcupine)
5230VS Series Chevron Long Edge Milling (Porcupine) Shoulder / Profiling / Slotting HIGH PERFORMANCE LONG EDGE MILLING CUTTERS The Stellram 5230VS09 and VS12 Series is perfectly quali ed for pro ling and
USA Headquarters. Global Headquarters
USA Headquarters Long Beach, California 5855 Obispo Ave., Long Beach, CA 90805 Tel. 562-808-8000 Fax: 562-808-8137 losangeles@brightonbest.com Global Headquarters Tainan, Taiwan No. 122, Yi-Lin Road, Rende
PELLET MILL. N-MIDI pellet mill has the following general specifications, valid for each model: PELLET MILL Unit of measurement N-MIDI
PELLET MILL N-MIDI pellet mill has the following general specifications, valid for each model: PELLET MILL Unit of measurement N-MIDI Dies cutter internal diameter mm 400 Rollers diameter mm 180 Pellet
MANUFACTURING PROCESSES
1 MANUFACTURING PROCESSES - AMEM 201 Lecture 8: Forming Processes (Rolling, Extrusion, Forging, Drawing) DR. SOTIRIS L. OMIROU Forming Processes - Definition & Types - Forming processes are those in which
Forest Industry Chains
Since 876 Forest Industry s your link to total value websterchain.com 800-24-927 ISO900 Registered HISTORY Webster Since 876 Webster Industries, Inc has provided conveying solutions of all types to a broad
A New Positive Multi Corners Milling Line
1/9 A New Positive ulti Corners illing Line 2/9 With the increasing popularity of small machining centers, TaeguTec is pleased to launch a new single-sided line of positive seven corners insert that generates
DOUBLE SIDED POSITIVE INSERT WITH 6 CUTTING EDGES!
DOUBLE SIDED POSITIVE INSET WIT 6 CUTTING EDGES! s: 0-60 Cutting Edge : WNGU09 - WNGU3 - Geometry: ipos Corner Configurations:, 20, 3, 39, 62 Nominal Lead Angle: 0º Applications: oughing, finishing, one-cuts,
CASTOR / CASTOR / CASTOR
/ / Your LUCAS G. dealer BALE FEEDER STRAW BLOWER SILAGE LOADER BALE FEEDER STRAW BLOWER SILAGE LOADER RECIRCULATING FEEDER STRAW BLOWER ALL FODDER Pictures, weights and technical specifications are only
1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc.
Product Name Picture Alloy Temper Thickness Width 5 bars Tread Plate /Aluminu m Checker Plate 1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc. H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38,
CUTTING TOOL TECHNOLOGY
CUTTING TOOL TECHNOLOGY Tool Life Tool Materials Tool Geometry Cutting Fluids Cutting Tool Technology Two principal aspects: 1. Tool material 2. Tool geometry Three Modes of Tool Failure Fracture failure
4123: Power-driven saws and knives. (A) Reserved. (B) Reserved. (C) Bandsaws, band resaws, and band knives.
ACTION: Original DATE: 03/03/2010 12:47 PM 4123:1-5-08 Power-driven saws and knives. (A) Reserved. (B) Reserved. (C) Bandsaws, band resaws, and band knives. All portions of the saw blade or band blade
PORTA-FAB Cleanroom Wall Systems
PORTA-FAB Cleanroom Wall Systems FABLINE FURRING 500 INSTALLATION INSTRUCTIONS IMPORTANT Porta-Fab Advises A Thorough Reading of These Instructions Before Beginning Installation. INTRODUCTION Porta-Fab
I H L STAR TOOL SUPPLY / GRAND TOOL SUPPLY SAW BLADES BAND SAW BLADES SELECT THE RIGHT BAND SAW BLADE IN SIX STEPS
Tel: 2015188461 / Fax: 2015963427 BAND SELECT THE RIGHT BAND SAW BLADE IN SIX STEPS To get the best, most efficient performance from your band saw machine requires the proper band saw blade. The information
Forest Industry Chains your link To Total Value
Forest Industry s your link To Total Value websterchain.com 800-24-927 ISO900 Registered HISTORY Webster For over 00 years, Webster Industries, Inc., has provided conveying solutions to a diverse range
For Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing METR Advanced Technologies for Gear, Spline and Rack Manufacturing See it in action The VARDEX Gear Milling Concept Advanced milling tools with multi-flute indexable
GET. HENSLEY XS - MINING SOLUTIONS Strength. Durability. Performance. Productivity
GET HENSLEY XS - MINING SOLUTIONS Strength. Durability. Performance. Productivity HENSLEY EXTREME SERVICE EXTREME STRENGTH High performance, lasting value Construction operations worldwide depend on the
Minerals Enduron HPGR High Pressure Grinding Roll
Minerals Enduron HPGR High Pressure Grinding Roll *First choice for energy efficient grinding 1 High Pressure Grinding - proven technology High Pressure grinding has become the go to technology for size
Modular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
MaxiMill HFC 'Feed matters', rapid milling
MaxiMill HFC 'Feed matters', rapid milling EN CERATIZIT - secrets of success Secrets of success CERATIZIT is your partner for exceptional hard material solutions. Hard materials and tools from CERATIZIT
The new force in machining.
Product handbook Milling _ SILVER, BLACK, STRONG The new force in machining. Yesterday, it was machining. Today, it s tigering. Cutting tool materials with the Tiger tec technology brand are setting the
7220VM Series. Disk Mill Cartridge Cutters
Series Disk Mill Cutters Slotting / Shoulder DISK MILL CARTRIDGE CUTTERS 7220VM Disk Mill Cutter series with adjustable cartridges are designed for machining deep slots or side shoulder milling operations.
Post Style with ABS Real Tuff
Post Style with ABS Real Tuff Mantova s patented Post Shelving with ABS Real Tuff removable shelves have been making life easier for thousands of Australian businesses for more then a decade. Removable
STRENGTH HIGH PERFORMANCE, LASTING VALUE
STRENGTH HIGH PERFORMANCE, LASTING VALUE Construc on opera ons worldwide depend on the safe, cost effec ve performance of Hensley G.E.T. systems. The KMAX System of ground engaging tools uses strength,
- Rated voltage: 240/415 VAC - Rated frequency: 50Hz - IEC SABS RCC IP65 (IEC529)
JKA Wiring & Cable Accessories Bill Fireman Switch Extra heavy duty N5 0A N303 3A Protection: IP55 rated Code: VSSWFIRE Aluminium Fireman Switch FS -Series Current Rating Pole 4 Pole Features: 0 Amps FS0
80_0VA90-_R-16 Series
Series Cartrige Shouler Milling Cutter Facing Slotting 90 CARTRIDGE SHOULDER MILLING ASSEMBLIES Applications: 80_0VA90 cutter series are assemble with cartriges for AP..16 milling inserts for face an shouler
FS and FD Cast Hub Device Boxes UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.
S and ast Hub evice oxes UNILTS for use with Threaded Rigid onduit and IM. ll device boxes have ridge top construction. pplications ccommodate wiring devices such as switches and receptacles. Provide excellent
PANELITE. Bonded Series Fabrication Guide
PANELITE Bonded Series Fabrication Guide www.panelite.us (c) Panelite 2012 PANELITE Bonded Series Handling and Storage General The plastic film protects panel surfaces. Keep the protective film in place
QForm. Form3D. Advanced software for forging simulation
QForm Form3D Advanced software for forging simulation The goals of forging technology : Make the parts of the required shape Provide required properties Do it in time and at the lowest cost Forging process
Alignment Problems and Techniques for Saw Grinders
Alignment Problems and Techniques for Saw Grinders Bruce Lehmann TKT Engineering Inc. Surrey, B.C., Canada This paper presents some simple tools and methods for accurate setup and alignment of top, face
TECHNICAL INFORMATION
TECNICAL INFORMATION Feed rates and time calculation It is simple and easy to calculate your speed and feeds using ORN S CT program. We recommend that you calculate the cutting data with this program as
New Tip Geometry for Flat Bottom Hole-Making
New ip Geometry for Flat Bottom HoleMaking iameters: Metric: 8.00mm to 25.5mm (.5mm increments) Inch:.312" 1" Geometry: Steel & General Purpose PF esignation Grade: IN2505 Focus: ie Spring Industry SHCS
The Latest Profiling Technologies
The Latest Profiling Technologies Contents 1. Objectives of the system 2. Typical arrangement 3. The profiling concept in details 4. Scanning & Optimization 5. PLC/Controls & HMI Objective of the system
Producing Metal Parts
Producing Metal Parts CNC vs. Additive Manufacturing www.3dhubs.com METAL KIT 2 Introduction This Kit discusses how to select the right manufacturing process for metal parts by comparing CNC and Additive
Invitation No
Invitation No.: 010-16 Location: All Districts Commodity: Bull Hog Excavator Wood Shredders or approved equal Pricing: http://www.dot.state.oh.us/divisions/contractadmin/contracts/purchdocs/010pricing.xls
INDUSTRIAL CURTAINS INSTALLATION INSTRUCTIONS CHAIN SUPPORT MOUNTING
INDUSTRIAL CURTAINS INSTALLATION INSTRUCTIONS MOUNTING GETTING STARTED Open all carton(s) containing hardware and remove all items. Position the hardware on the floor under the opening. Next, look in the
hors Anc Eaton's B-Line series fasteners 183
183 Glossary Prefix - Description Screw Dia. Length Suffix ACB - Concrete Anchor Bolt 4 - #4 75-3 /4" AN - Acorn Nut ACPD - Bang-IT 6 - #6 81-13 /16" CH - Combo Head ACPW - Wood-Knocker 8 - #8 87-7 /8"
B.C. Saw Filer s Association Trade Show In Print
B.C. Saw Filer s Association Trade Show In Print It s shaping up to be another challenging year for the forest industry, with the current downturn affecting all sectors, from the forest to the sawmills,
11/2 HOUR UL CLASSIFIED CURTAIN TYPE (D)IBD2, (D)IBD2SS AND IBDT FIRE DAMPERS
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 INSTALLATION INSTRUCTIONS 11/2 HOUR UL CLASSIFIED CURTAIN TYPE (D)IBD2, (D)IBD2SS AND IBDT FIRE DAMPERS APPLICATION The fire
12"-18" Capacity Drum-Style Chippers
12"-18" Capacity Drum-Style Chippers Compact and capable. Bandit s powerful medium-capacity drum-style s are taking the industry by storm. The durability of a Bandit meets the high production of a larger
CONSTRUCTION B UCKET
CONSTRUCTION BUCKETS HENSLEY BUCKETS EXTREME STRENGTH HIGH PERFORMANCE, HIGH PRODUCTIVITY Hensley buckets are designed for maximum production, built to take on any job. Continuous commitment to quality
Cutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba
Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those
AISI A2 Cold work tool steel
T OOL STEEL FACTS AISI A2 Cold work tool steel Great Tooling Starts Here! General AISI A2 is an air- or oil hardening chromiummolybdenum-vanadium alloyed tool steel characterized by: Good machinability
NIKKEN KOSAKUSHO WORKS, LTD.
Fine boring head Min. readout : φ0.00 /0.000inch Easy digital display Wide boring range φ6 - φ0 Coolant through : 4Mpa evel of protection : IP67 NIKKEN KOSAKUSO WORKS, TD. 9 MODUAR TYPE emac DIGITA BORING
Metal extrusion. Metal stamping
Metal extrusion Answer the following questions 1. In which of the following extrusion operation is friction a factor in determining the extrusion force (one best answer): (a) direct extrusion or (b) indirect
Tri Custom Manufacturing
Catalog 106 Tri Custom Manufacturing Balusters / Spindles Porch & Newel Posts Caps / Post Skirts Railing Brackets Post Mount Towers Gate Hardware Faux Rock Pillars Post Wraps Quality Products for the Fence,
G.W.B. (BY OTHERS) DRYWALL SETBACK
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE FSC-25N CHANNEL GUARD INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION
DYMAX WORK TOOLS STAY IN THE LOOP TABLE OF CONTENTS.
DYMAX WORK TOOLS TABLE OF CONTENTS HISTORY...3 TREE SHEARS FOR EXCAVATORS...4-5 CONTRACTOR SERIES GRAPPLE SHEARS...6 180 ROTATION LIMB SHEARS...7 14 TIMBERWOLF TREE SHEARS...8 14 RANCH AXE TREE SHEARS...9
Mounted points. Table of contents. Hardness R for foundries Cylindrical ZY 35 Tree SP 35 Tapered KE 36
Fine grinding and polishing tools iamond and CBN tools 204 205 Mounted points able of contents Contents Page General information 3 he fast way to the best tool 4 Ordering instructions 6 Extensions for
Jongen UNI-MILL VHC milling cutter
Jongen Werkzeugtechnik Jongen UNI-MILL VHC milling cutter Trochoidal milling at the highest level Jongen UNI-MILL VHC milling cutter Static and dynamic "trochoidal milling" is a combination of circular
BRUSHES WITH SHANK 62 63
6 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0.5 0.0 STH 0.50 0.00 ROH 0.50 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 75 9 /8 5 5/8 8 5,000
Installation Guide for Domestic Decking in Recycled Plastic
Daisy Mill (Gate 3), Unit B Daisy Street, Waterside Colne, Lancashire, BB8 8ER T: 01282 861325 E: sales@kedeltrade.co.uk W: www.kedeltrade.co.uk Installation Guide for Domestic Decking in Recycled Plastic
An effective sensor for tool wear monitoring in face milling: Acoustic emission
Sādhanā Vol. 33, Part 3, June 2008, pp. 227 233. Printed in India An effective sensor for tool wear monitoring in face milling: Acoustic emission M T MATHEW 1, P SRINIVASA PAI 2 andlarocha 1,3 1 Centre
NATIONAL SMOKEJUMPER TRAINING GUIDE USFS Chapter 3 CROSS CUT SAW USE
Chapter 3 CROSS CUT SAW USE 1 LESSON PLAN OUTLINE PROGRAM: SMOKEJUMPER LESSON: CROSSCUT SAW USE OBJECTIVES: Upon completion of this lesson, the trainee will be able to safely and effectively use a crosscut
Technical Information
Steel 305 Technical Information Flexovit is able to offer a broad range of industrial wire brushes which are used in industry of surface processing. The range encompasses crimped and knotted wire power
Nexus Cutting Tools. Accurate. Simplify. Nexus ShrinkMILL and Face Mills. Innovative. Solutions that are innovative, accurate, and simple.
Nexus Cutting Tools Solutions that are innovative, accurate, and simple. Minimize T.I.R. Maximize rigidity Increase tool life Lamina High-Performance Eliminate insert guesswork Minimize set up time Maximize
ECONO 200 INPLANT OFFICE
Warehouse Storage & Material Handling Equipment+ ECONO 200 INPLANT OFFICE INSTALLATION & ASSEMBLY INSTRUCTIONS American Surplus Inc. 1 Noyes Ave. East Providence, RI Phone: (800) 989-7176 Fax: (401) 434-7414
Modular Biesse Concept
Modular Biesse Concept When competitiveness means reorganising manufacturing process Made In Biesse 2 The market demands Interior design is moving from rectangular to shaped forms. Traditional production
COFA. Consistent deburring of even and uneven bore edges, front and back in one operation.
COFA Consistent deburring of even and uneven bore edges, front and back in one operation. Table of Contents Introduction Characteristics and Advantages 3 Applications and Typical Work Pieces 5 Tool Description
- Sawing trunks or logs, saws specially adapted therefor: B27B 1/00, B27B 3/00, B27B 7/00, B27B 15/00
B27B SAWS FOR WOOD OR SIMILAR MATERIAL; COMPONENTS OR ACCESSORIES THEREFOR (saws specially adapted for pruning or debranching A01G 3/08; sawing apparatus specially adapted for felling trees A01G 23/091;
Quend 700. Extra High Strength Structural Steel. Dimensions. 1 Steel description and applications. 4 Flatness, tolerances & surface properties
Extra High Strength Structural Steel Quend 700 1 Steel description and applications Quend 700 is extra high strength structural steel produced as quenched and tempered with a minimum yield strength of
Precision Stripe Coating by Nonmeniscus
Precision Stripe Coating by Nonmeniscus Guide Slot Die Naoki S. Rikita Technical Director R&D Marketing Division, MMC Ryotec 7F. KFC BLDG 1-6-1, YOKOAMI, SUMIDA-KU, TOKYO, 1300015 JAPAN email: rikita@mmc.co.jp
Cross-cutting system KSS 80 Ec / 370
Portable circular saws K 85 / K 85 Ec Cross-cutting system KSS 80 Ec / 370 The saw of the future, available now. Pivot point aligned with bottom edge of track Perfect cutting quality, even when executing
Food preparation equipment
blenders actuators application internal thread teeth material 698248-38,5 2 M6L 6 rubber - amilton each 28002302 2 65008 for jar 27 2 M6L 8 plastic - VEMA XRFR6 3 65009 for jar 27 4 M6L 4 plastic - VEMA
Thermal Surfacing Powder choice with ease
Thermal Surfacing Powder choice with ease Why Thermal Surfacing Thermal surfacing is a cost effective method to achieve high performance characteristics on exposed metallic surfaces. A metal object can
Chop Saws & Radial Arm Saws Combination Saws Conic Scoring Saws Dado Sets/ Additional Chippers Door Jamb Saws Double Cut Off Saws
Table of Contents TYPE OF SAW PREFIX CODE PAGE 22-3 Saws GA 246 Additional Items Various Blind Cutting Saws NM, LTL, KC 13 Chop Saws & Radial Arm Saws & TH 14 Combination Saws CR 6 Conic Scoring Saws SC
BAND SAW BLADES NEW. Blades & Solutions. The Professionals Edge TM
BAND SAW BLADES NEW Blades & Solutions The Professionals Edge TM What do we mean by The Professionals Edge TM? It all comes down to confidence in quality products. With Simonds products you have the peace
Catalog Contents: Profile and Copy Milling Program Inch 6 Metric 58. Graphite Machining Program Inch 8 Metric 60. PCD & CBN Inserts Inch 18 Metric 72
Catalog Contents: Profile and Copy Milling Program Inch 6 58 Graphite Machining Program Inch 8 60 PC & CBN Inserts Inch 18 72 Copy Milling / Button Insert Cutters Inch 24 77 APKT Square Shoulder Cutters
LIFT TRUCKS FOR EVERY APPLICATION
LIFT TRUCKS FOR EVERY APPLICATION Container ports and terminals Intermodal and barge handling Steel and aluminum Mining General manufacturing Pulp & paper, wood Automotive Wind power Oil & gas Nuclear
MEASURING THE DYNAMIC TWISTING BEHAVIOUR OF SAW BLADES IN THE KERF DURING THE SAWING PROCESS
Journal of Machine Engineering, Vol. 16, No. 3, 2016 Received: 12 January 2016 / Accepted: 23 March 2016 / Published online: 20 June 2016 band saw, cutting, vibration, measurement Daniel ALBRECHT 1* Thomas
Installation Guide. PrivacyShield Outdoor Enclosure
Installation Guide PrivacyShield Outdoor Enclosure Table of Contents 1.0 Introduction... 2 2.0 Materials, Delivery & Tools... 2 3.0 Layout and Post Locations. 3 4.0 Foundations... 5 5.0 PVC Installation....
Wave Radius Mill RSX Series
TOOLING NEW E-122 M K N H Radius Mill for Exotic Alloys Wave Radius Mill RX RX Features The Wave Radius Mill RX is developed for exotic alloys as well as for stainless steel machining. In combination with
SERIES
eep Hole rills Spiral flute drilling from 15x to 40x CNC style solid carbide gun drills Miniature CNC style gun drills Classic gun drills with brazed head RT 100 T High penetration rate EB 100 CNC style
Unverferth. Tillage. Ripper-Stripper Strip-Till Tillage Tool. One-Stop, Strip-Till Shop. Models 332 and 312
Unverferth Tillage Ripper-Stripper Strip-Till Tillage Tool One-Stop, Strip-Till Shop Models 332 and 3 Seedbed Tillage Options Numerous tillage attachments, including variations of blades, baskets and firmers
Drag Finishing
www.rosler.us Drag Finishing Mass Finishing at its Best Rosler has a long and successful history of using advanced mass finishing techniques such as drag finishing and plunge finishing. Early efforts focused
Optimization and Process Parameters of CNC End Milling For Aluminum Alloy 6082
Optimization and Process Parameters of CNC End Milling For Aluminum Alloy 6082 K. Siva Kumar PG Student Department of Mechanical Engineering, MITS, Madanapalle, Chittoor/Andhra Pradesh, India Bathina Sreenivasulu
Diamond and CBN tools
iamond and CBN tools iamond and CBN tools able of contents Contents Page Industries, PFRRGONOMICS, packaging 3 he fast way to the best tool 4 Abrasives, materials, grit sizes 6 Comparison of bond types
INDUSTRIAL THERMOMETERS
JJ SIKA thermometers for industry and marine sector JJ Special versions and accessories JJ SIKA thermometers for heating, air conditioning and ventilation (HVAC) INDUSTRIAL THERMOMETERS Contains products