NIKKEN KOSAKUSHO WORKS, LTD.

Transcription

1 Fine boring head Min. readout : φ0.00 /0.000inch Easy digital display Wide boring range φ6 - φ0 Coolant through : 4Mpa evel of protection : IP67 NIKKEN KOSAKUSO WORKS, TD. 9

2 MODUAR TYPE emac DIGITA BORING EAD Precision Digital Scale Boring ead Boring ead φ 6 ~ 30 Digital Display Slide Coolant Nozzle φ 8 ~ 6 φ 4 ~ 86 * φ 80 ~ 0 Battery Cover *Counter weight is needed when boring over φ9 Slide travel distance shown on the digital display Min. readout :0.00mm / 0.000inch By direct scale Wide boring range :φ 6 ~ φ 0 Coolant through :4 MPa evel of protection :IP 67 Required Battery is SR44 ( off)

3 MODUAR TYPE emac DIGITA BORING EAD Combination with modular shank Q : Corresponding to various taper machines φ φ 6 φ 6 ~ 30 EJ φ 8 ~ 6 ECC-8-0 ECC-36-. ECCB-3 φ φ φ φ 4 ~ 0 φ φ Base older for Modular Type Q Please refer P.3, P.4 Digital Boring ead Q-EMAC60-6 Boring ead & EJ Boring Bit ECC Cartridge ayout ECC-4-9 ECC-4-BM0 ECC-9-CW ECCP-4 Boring Bits Cartridge for emac EJ,ECC φ6-30 φ8-6 φ4-86 φ80-0 φ9-0 φ6-8 EJ6-6- φ8- EJ6-8-8 φ-7 8 EJ6--40 φ6-3 EJ6-6- φ-30 EJ ECCB-3 φ8-44 ECC-8-0 φ36-6 ECC ECC-4 -BM0 φ4-86 ECC ECCP-4 φ80-0 ECC ECC-9-CW ECCP-4 φ9-0 ECC *φ6-φ30 Boring bit is the minimum layout of the set items Optimal boring bits are also available. Please refer P. for boring bits cartridge.

4 TAPER Coupling Dia. Weight Q C C No. Fig. (Kg) BT30 -Q B 3 0. BT40 -Q- 0. BT BN BT -Q N 70.4 NBT30 -Q B 3 0. NBT40 -Q BN NBT -Q N 70.4 MBT40 -Q BN MBT -Q N 70.4 NC- 46 -Q B NC- 63 -Q NC- 8 -Q- 7. NC BN NC-00 -Q SK40A -Q SKA -Q SK63A -Q BN SK00A-Q N C6 -Q- 7. BN 4 C8 -Q OCK NBT 3OCK MBT SK-A POYGONA TAPER NT A MT BASE ODER for MODUAR TYPE(Q) Interface of Taper Shank T30W -Q- 40 T40U -Q- 3 T40M -Q- 3 TU -Q- 4 TM -Q- 4 TT3 -Q- 3 TT4 -Q- 4 MT3T -Q- 4 MT4T -Q- 4 MTT -Q- 3 MT6T -Q B BN B BN K3 -Q K BN 0 K4 -Q The coupling bolt and wrench are supplied as standard. All series have center through (MAX : 4MPa). Other shanks are also available. Please contact us for more detail. 3

5 BASE ODER for MODUAR TYPE(Q) Interface of Taper Shank φq φc φc φq φc φc φq φc Fig. Fig. Fig.3 φqφc φc φqφc φc φqφc Fig.4 Fig. Fig.6 φqφc φq φc Fig.7 Fig.8 φc φ3.4 φq φc Fig.9 φq Fig.0 4

6 MODUAR TYPE emac DIGITA BORING EAD Digital Boring ead Q-EMAC60-6 Please select boring bit, cartridge and inserts accordingly for the boring head and your cutting conditions. Boring Bit Cartridge Optimum Boring Range φ Type Insert Tip Clamp Bolt Thread Size Insert Clamp andle EJ6-6- EJ6-8-8 EM0 TS TS M TORX T EJ EJ Boring Bit EJ6--4 EJ6-4- EM09 CST M. TORX T EJ EJ EJ Cartridge ECC-8-0 ECC-36-. ECC-4-9 EM09 EM CST CS300890T M. M3 TORX TORX T-8 T-8 Bit EJ6-0-3,EJ6--4,EJ6-4-,EJ is not included in the set. Please purchase single item. Carbide bit of /D = 7 times or more is also available. Please contact us for more detail. Insert Tip Material For the Boring of arge Diameter and Short Depth, the use of insert with large nose radius is recommended. The smaller nose radius inserts are ideal for smaller diameter boring or finishing operation. Grade Boring Bit Cartridge Dimension Material NOSE R EJ EM φ3.97 WCGT00 EM EJ ECC ECC Steel Stainless Steel Cast Iron Aluminium eat-resistant Alloy. Titanium φ.6 φ TPGX090 TPGX03 EM09- EM09-4 EM- EM Cermet(w/o coating) T NX Carbide K F TI Minimum quantity order is 0 pcs / case. Please use insert clamp bolt of other manufacturers when using insert of same manufacturers.

7 of ISO Standard Insert Tip T P G T Insert Shape T : W : C : M : S : A : Grade & Material Grade NX TI MODUAR TYPE emac DIGITA BORING EAD Cutting Edge ength Normal Clearance B : C : 7 P : N : 0 E :0 Grade Indication Cermet Carbide K K0 Insert Tip Material Indication T F Specification The general material for the steel and the cast iron with the heat resistance and the toughness. Toughness and the excellent wear resistance. Applicable for the cast iron, non-ferrous metal and the non-metal. Reference Cutting Speed Best Good - Unsuitable Insert Tip Thickness Corner Radius Tolerance Class G : Ground M : Pressed Grade Cutting Direction : eft N : Either Tip Breaker & ole Configuration W : T : R : B : : M : X : Special Please add the grade indication into, and add the insert tip material indication at the end off the e.g. EM09-T4(NX) SS4 SC SCM SKD SC FC,FCD SUS A,AC Ti or T NX - 00~300 00~300 00~300 80~ 80~ ~60 80~ - F TI ~30 300~0 30~40 Please set the optimum conditions in reference to the above conditions. The cutting speed is recommended to be reduced to % for the interrupted cutting. Rapid speed : ~6000min-. Reference Cutting Condition (Removal,Feed) Boring Range Boring Bit Type Cartridge Best Condition mm/φ mm/rev. MAX. Condition mm/φ mm/rev. φ 6~ EJ ~ ~ φ 0~ 30 EJ ~ ~ φ 8~ 6 ECC ~ ~ φ 4~0 ECC ~0. 0.0~ Spindle Speed n(min - ) = Feed per Min. Vf(mm/min - )= Vc 000 πd n f (Feed per rev.) ogical Surface Finish(mm) = 8 Nose/R Feed per rev. depends on Nose/R and accuracy required. Vc: Cutting Speed(m/min - ) π : 3.4 D : Cutting Diameter(mm) f : Feed per Revolution(mm/rev) 6

8 MODUAR TYPE emac DIGITA BORING EAD emac Boring Set Parts ist Code. No. Part name Q'ty Weight emac Boring ead Q-EMAC EJ EJ EJ EJ EJ ECCB-3 0. S ECC M ECC ECC ECC -4-BM0 0.0 ECCP-4 0. ECC-9-CW 0. EM0-T NX EM09-T NX EM-T NX TS TS CST CS300890T Boring Bit Extension Bar for Cartridge S/M Cartridge S.EMAC60 Bush Plate for Cartridge Counter Weight for arge Dia. Insert Tip Clamp Bolt / Spare Wrench Set Exclusive Case Base holder for modular type is sold separately. Please refer Please refer P. for inserts. Kg P.3, P.4. Specifications are subject to change without notice. NIKKEN KOSAKUSO WORKS,TD. OSAKA, JAPAN. -, -chome, Minamishinden, Daito-shi, Osaka-fu, Japan. Telephone Telefax U.S.A YNDEX-NIKKEN Tel MEXICO ERRAMIENTAS YNDEX-NIKKEN S.A.de C.V. Tel FRANCE PROCOMO-NIKKEN S.A.S Tel.+33-(0) UK NIKKEN KOSAKUSO UK TD. Tel.+44-(0) F.R.GERMANY NIKKEN DEUTSCAND Gmb Tel.+49-(0) ITAY VEGA INTERNATIONA TOOS S.P.A Tel SWITZERAND NIKKEN SWITZERAND AG Tel.+4-(0) SCANDINAVIA NIKKEN SCANDINAVIA AB SWEDEN Tel.+46-(0) SPAIN CUTTING TOO S. (TOOING) Tel.+34-(0) PORTUGA NIKKEN EUROPE DIVISORES ESPANA (CNC ROTARY TABE) Tel.+34-(0) NIKKEN KESICI TAKIMAR SAN. VE UUSARARASI TIC. A.S Tel.+90-(0) KOREA KOREA NIKKEN TD. Tel.+8-(0) P.R.CINA SANGAI ZONG YAN TRADING CO., TD Tel.+86-(0)-0- SINGAPORE NIKKEN KOSAKUSO ASIA PTE, TD Tel TAIAND SIAM NIKKEN Co., TD. Tel.+66(0)78-03 TURKEY osaka@nikken-kosakusho.co.jp Please give your order to the following agent. D.JJ.0.