Technical Specifications : Ropes. Netting. We endeavor to supply quality products with highest national and international standards.

Size: px

Start display at page:

Download "Technical Specifications : Ropes. Netting. We endeavor to supply quality products with highest national and international standards."

Kory Golden
5 years ago
Views:

requirements of CAP 437 ICOA annex 14 volume 2.

offshore, onshore oil and gas industries.

Technical Specifications : Ropes We use supreme quality of Sisal Rope yarn 16 mm / 20 mm which is manufactured as per IS

1 Helideck Landing Nets Our Landing nets are professionally crafted for our esteemed clients which meets and exceeds the requirements of CAP 437 ICOA annex 14 volume 2. Being the part of a group which primarily engaged in load testing and inspections of related tools and tackles used in offshore, onshore oil and gas industries. We endeavor to supply quality products with highest national and international standards. Technical Specifications : Ropes We use supreme quality of Sisal Rope yarn 16 mm / 20 mm which is manufactured as per IS 1321 / BS standard and conforms to the breaking test as specified in the respective standards. Construction - 3 strand hawser laid. Ropes are further treated with rot proofing agents thereby to increase the shelf life of the product. Netting - Tautly-stretched rope netting, Intersections are cross tucked to prevent distortion of the mesh. - The nets are secured at every 1.5 mtrs using adequate long ropes as per helideck requirement.

Testing, Certifications & Conformity Conforms to - CAP 437 ICOA annex 14 volume 2.

the breaking strength and construction. - Certificate of Conformity to CAP 437 ICOA annex 14 volume 2.

2 Testing, Certifications & Conformity Conforms to - CAP 437 ICOA annex 14 volume 2. DNV* / Major Class Surveyors * Break Load Test and Proof Load Test of the sample can be witnesses by class surveyors specific to customer requirement. Certifications - Proof Load Test Certificate of the ropes for tensioning up to 2225 N - Break Load Test Certificate of the ropes indicating the breaking strength and construction. - Certificate of Conformity to CAP 437 ICOA annex 14 volume 2. Photograph of the eye spliced sample of sisal rope being load tested at our in-house test bench Photograph of the sample sisal rope showing ultimate load results on our in-house test bench Packaging & Transport - Major World Ports served - Packaging as per requirements of ports. - Effective packaging for each net to prevent against water and pest during transit.

Navi Mumbai and Nashik. Products : Wire Rope Slings, Shackles, Polyester Slings, All types of fabricated items.

Services : Testing, Examination & Certification of all types of Lifting Appliances, Tools and Tackles, Pressure Vessels and Plants as per statutory regulations.

3 Company Profile Betal Group was established in August in response to the related necessities in the field of Ship Building, Shipping, Offshore and General industries Betal Group with its headquarter in Mumbai, India with state of the art facilities in Navi Mumbai and Nashik. Products : Wire Rope Slings, Shackles, Polyester Slings, All types of fabricated items. Tailor made Lifting Frames and Beams, Special purpose Machines, Lifting Equipments as per customer requirement, meeting national and international standard. Services : Testing, Examination & Certification of all types of Lifting Appliances, Tools and Tackles, Pressure Vessels and Plants as per statutory regulations. BETAL Group takes the responsibility to ensure total safety at work place through risk analysis, hazard observation and suitable mitigation plan. The Group also provides proper health and environmental protection to its employees and neighborhood. Nashik Factory Objectives with HSE Policy Ÿ Endeavor to create job, continuous employment opportunity and financial security for employees, directors, consultants and other business associates. Ÿ Create a fund under company's social responsibilities to provide financial assistance to charitable and socio-cultural organization engaged in development activities. Ÿ Employ skilled man power to produce quality products as per Indian and international standard procedure, to the satisfaction of customers and ultimate users. Ÿ Establish customer feedback system for continuous improvement of product quality Ÿ Establish procedures for Job safety analysis, tool box meeting, hazard observation and mitigation plan in place for every individual scope. Ÿ To achieve NIL time loss due to facility break down / personnel injury Ÿ Employ preventive maintenance for the plant and machineries to avoid facilities breakdown. Ÿ Use only quality raw material and to follow quality test procedure for the unfinished and finished products. Ÿ Proper Documentation of every procedure, customer feedback, action initiated and results. Ÿ Continuous improvement of personnel skill and product knowledge through quality training and up to date information system. Corporate Office

Person by Director General & Chief Inspector of Dock Safety Division, Govt.

of Maharashtra with hands on experience since 1983 for providing services to

with Diploma in mechanical engineering, an associated member of Indian

engineering division for fifteen years and offshore petroleum exploration,

thirty years, specialized in the field of subsea engineering for inspection,

Avisek Gayen - Executive Director and Chief Financial Officer of BETAL The

4 Directors Profile Mr. Anup Kumar Gayen - Managing Director : The Founder and Visionary of Betal Group., A Rare Specialist Accredited Mechanical Engineer and declared Competent Person by Director General & Chief Inspector of Dock Safety Division, Govt. of India and by Directorate of Industrial Safety & Health Division of Govt. of Maharashtra with hands on experience since 1983 for providing services to the offshore and onshore support facilities for various oil and gas, shipping companies etc. Mr. Hriday Ranjan Mitra - Executive Director (Operations) : A commerce graduate with Diploma in mechanical engineering, an associated member of Indian Institute of Business management, served in Indian naval aviation engineering division for fifteen years and offshore petroleum exploration, production and product distribution network Industries for over a period of thirty years, specialized in the field of subsea engineering for inspection, repair and maintenance of offshore subsea assets. Mr. Avisek Gayen - Executive Director and Chief Financial Officer of BETAL Group. The responsibilities include Finance, Corporate Communications and Branding. Also responsible for the companies administration for the compliance of groups statutory Accounting system and Internal Audit functions. Mr. Avisek is a commerce graduate from Mumbai University. Our Clients...and many more

Contact Us Registered / Regional Office Mumbai * All documents to be marked here. Sagar CHS, Bldg : D13-2:4, Sector-29, Vashi, Navi Mumbai - 400 703, India.

5 Contact Us Registered / Regional Office Mumbai * All documents to be marked here. Sagar CHS, Bldg : D13-2:4, Sector-29, Vashi, Navi Mumbai , India. Telephone : co@betal.info Website : Regional Office Nashik, Maharashtra Sagarika CHS, Flat no : 8, Shantipark, Upnagar, Nashik Maharashtra, India Nashik Corporate Office sq ft. Regional Office Kolkata, West Bengal Sahara Apartment, Unit No : II-D, 2nd Floor, Narayantala (E), Baguiati, Kolkata, India. Overseas Offices : United States of America (As Agents) RJ Engineering Systems, Inc dba RJ Industrial Systems West Road Suite 350, Houston, Texas, USA Tel: Ex 306 Fax: Mobile: Mumbai Works / Test House C-304,MIDC, Pawne, Turbhe-Mhape Rd. Navi Mumbai , India. Tel : / Nashik [Maharashtra]Works / Test House Plot No: 1, Gat No. 408, Chandgiri, Shinde-Jhakhori Road., Taluka & District - Nashik Tel : Directors Contact Information : Mr. Anup Kumar Gayen anup@betal.info Mobile : UAE (As Exclusive Agents) RJ Engineering Systems, Inc. P.O.Box 8623, Z1-64 SAIF Zone, Sharjah, UAE Tel / Fax: Mobile: Mr. H R Mitra mitrahr@betal.info Mobile : Mr. Avisek Gayen avisekgayen@betal.info Mobile :

All applications are to be sent, in duplicate, in the prescribed format along with all enclosures to:

All applications are to be sent, in duplicate, in the prescribed format along with all enclosures to: DS-CP-01/2008 APPLICATION PROCEDURE, ELIGIBILITY, ETC. FOR GRANT OF APPROVAL AS COMPETENT PERSON UNDER REGULATION 2(d) OF THE DOCK WORKERS (SAFETY, HEALTH AND WELFARE) REGULATIONS, 1990. 1. APPLICATION