OVERHEAD LINE SPLICES AUTOMATIC COPPER

Transcription

1 OVERHEAD INE SPICES AUTOMATIC COPPER Fastest method of splicing copper & copperweld conductor Inhibitor protected for optimum long term performance Individually bagged to seal out dirt before use Ratings: Solid Copper = 90% of Conductor RBS* Stranded Copper = 80% of Conductor RBS* Copperweld = 75% of Conductor RBS* *RBS = Rated Breaking Strength Material: Shell - Drawn Copper Tube Jaw - Bronze Alloy +RUS isted COPPER G100 CONDUCTOR RANGE APPROXIMATE CONDUCTOR O.D. DIMENSIONS COPPER SOID ASTM-B58 STRAND ASTM-B8 COPPERWED STRAND MIN/MAX INCHES MIN/MAX MM A B G (86).50 (13) G # (86).50 (13) G11+ 8A (89).56 (1) G113 3 (7) 6A (89).56 (1) G11 3 (7), 5A (110).75 (19) G110 or 3 3 (7), (7) (160).75 (19) G (7) A (110).75 (19) G116 1/0 1 (7), 3A (110).75 (19) G117+ /0 1/0 (7), 1 A (10).9 () G118+ 3/0 /0 (7) (10).9 () G119+ /0 3/0 (7) (180) 1. (30) G10+ /0 (7,19) (180) 1. (30) G11 50 (19,37) (180) 1. (30) G (19,37) (0) 1.5 (38) G (19) (0) 1.5 (38) G17 00 (19,37) (0) 1.5 (38) G18 50 (37) (0) 1.5 (38) G (19,37) (0) 1.5 (38) Splices for Metric Conductor APPROXIMATE CONDUCTOR O.D. DIMENSIONS CONDUCTOR MIN/MAX INCHES MIN/MAX MM A B G110M 6 mm (107).51 (13) G111M 10 mm (107).51 (13) G11M 16 mm Sol (111).55 (1) G113M 16 mm Str (111).55 (1) G11M 5 mm (139).71 (18) G115M 35 mm (139).71 (18) G117M 50 mm (165).90 (3) G118M 70 mm (165).90 (3) G119M 95 mm (03) 1. (31) G10M 10 mm (03) 1. (31) 1-1 ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

2 AUMINUM G00 OVERHEAD INE SPICES AUTOMATIC AUMINUM ANSI C119., full tension, Class A connector (95% of conductor breaking strength unless otherwise noted) Color coded end funnel guides for easy identification Factory inhibitor protected Fastest method of splicing aluminum, aluminum alloy and ACSR conductor Material: Shell - High Strength Aluminum Alloy Jaws - Aluminum Alloy CONDUCTOR SIZE APPROXIMATE CONDUCTOR O.D. DIMENSIONS ACSR ASTM-B3 AAAC ASTM-B399 AAC ASTM-B31 MIN/MAX. INCHES MIN./MAX. MM COOR CODE A B G Blue 1 (360) 1.0 *Includes compact conductor of same size - ASTM-B00 Note: For conductors other than those listed, consult factory. G0A Orange 9 (30) 0.9 (3) G0A Red 1 (305) 1.0 G0A Red- Orange 1 (305) 1.0 G06A 1/0 1/0 1/ Yellow 1 (305) 1.1 (8) G076A 1/0-/0 1/0-/0 1/0-/ Yellow-Gray 18 (60) 1. (36) G07 /0 /0 / Gray 18 (60) 1. (36) G08 3/0 3/0 3/ Black 0 (510) 1.6 (1) G098 3/0-/0 3/0-/0 3/0-/ Pink-Black (560) 1.7 (3) G09A /0 /0 / Pink 17 (30) 1.6 (1) G1185A 1/0 1/0-/ (30) 1.0 G1195A /0-3/0 3/ (60) 1. (31) G105A */ Natural 9 (30) 1. (31) APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

3 OVERHEAD INE SPICES AUTOMATIC AUMINUM (MUTIPE AYER STRAND CONDUCTORS) AUMINUM G00 Automatic for larger multiple layer stranded conductor used in primary distribution and transmission ANSI C119., full tension, Class A connector (95% of conductor breaking strength unless otherwise noted) Color coded end funnel guides for easy identification Factory inhibitor protected Fastest method of splicing aluminum, aluminum alloy and ACSR conductor 3-3 Material: Shell - Seamless High Strength Aluminum Alloy Jaws - High Strength Aluminum Alloy Note: For conductors other than those listed, consult factory. MUTIPE AYER STRAND CONDUCTORS-KCMI SIZES CONDUCTOR SIZE APPROXIMATE CONDUCTOR O.D. DIMENSIONS ACSR ASTM-B3 AAAC ASTM-B399 AAC ASTM-B31 MIN/MAX. INCHES MIN./MAX. MM COOR CODE A B G (18/1) 31.8 * Brown 19 (80) 1.7 (3) *Includes compact conductor of same size - ASTM-B00 +Maximum design rating 10,000 lb./.5 kn **Round only G (18/1) 39.5 *397.5,** Green 0 (510) 1.8 (6) G (18/1) 65. * Blue (560).0 (51) G13 77 (18/1) *556.5, White (610).1 (5) GT1316A 66.8 (6/7) Natural 36 (916). (56) GT1317A 336. (6/7) Green 5 (60) 1.8 (6) GT1319A 77 (6/7) White 36 (916). (56) G1333A (18/1) Consult Fargo Natural 15 (380).0 (51) G1355A+ Consult Fargo Consult Fargo 700, Natural 16 (10).0 (51) G1385A+ Consult Fargo Consult Fargo Natural 16 (10).0 (51) G11A+ Consult Fargo Consult Fargo Red 16 (10).0 (51) ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

4 AUMINUM G*KR OVERHEAD INE SPICES AUTOMATIC - CORROSIVE ENVIRONMENT AUMINUM Designed SPECIFICAY for high corrosive / problem environments Extensively tested, including Fault Current & Salt Spray. ANSI C119., Class 1, full tension connector (Unless otherwise specified) ANSI C119. Class A, temperature rated connector Sequence Tested: Salt Fog per ASTM G85, Current Cycle per ANSI C119., and Fault Current per IEEE837 Color coded end funnel guides for easy identification Fastest method of splicing aluminum, aluminum alloy, and ACSR conductor Special inhibitor blend for corrosive environments Stainless springs Stainless or plastic pilot cups Holes in shell & center stop for drainage & evaporation Positive conductor insertion, look in the holes Material: Shell - Seamless High Strength Aluminum Alloy Jaws - High Strength Aluminum Alloy Internal Components - Stainless Steel or Plastic Conductor Strands Corrosion Resistant Splice (KR) After 000 hours of Salt Fog, 1000 hours of Heat Cycle, and Three Rounds of Fault Current Testing CONDUCTOR SIZE Includes compact conductor of same size. + Maximum design rating 10,000 lbs (.5kN) ** Round Only Note: For conductor other than those listed, consult factory. APPROXIMATE CONDUCTOR O.D. INCHES (mm) COOR CODE DIMENSIONS, INCHES (mm) ACSR AAAC AAC MIN MAX A B G0AKR # # # 0.80 (7.11) 0.30 (8.13) Red 1 (305) 1.0 G0AKR # - # # - # # - # 0.0 (5.59) 0.30 (8.13) Red-Orange 1.8 (35) 1.0 G06AKR 1/0 1/0 1/ (9.0) 0.00 (10.16) Yellow 1 (305) 1.1 (8) G076AKR 1/0 - /0 1/0 - /0 1/0 - / (9.0) 0.70 (11.9) Yellow-Gray 18 (60) 1. (36) G07KR /0 /0 / (10.16) 0.70 (11.9) Gray 18 (60) 1. (36) G09AKR /0 /0 / (1.83) (15.11) Pink 17 (30) 1.6 (1) G11KR 336. (18/1) , 336.** (16.7) 0.7 (18.39) Green 0 (510) 1.8 (6) G1333AKR (18/1) Consult Factory Consult Factory 0.80 (1.3) 0.90 (3.37) Natural 16.5 (0).0 (51) APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

5 OVERHEAD INE SPICES AUTOMATIC REDUCING Allows easy splicing from one size conductor to another size conductor Allows utilities the option of not stocking old conductor that isn t used anymore Splice provides full strength of the weaker of the two conductors and a resistance lower than the equivalent conductor Same design philosophy and material as used in the copper and aluminum automatic splices. Material: Copper Shell - Drawn Copper Tube Jaws - Bronze Alloy Aluminum Shell - Aluminum Alloy Jaws - Aluminum Alloy Copper ACSR REDUCING G 5-5 COPPER REDUCING SPICES CONDUCTOR SIZE DIMENSIONS ARGE END SMA END SOID STRAND SOID STRAND A B G150 6 (100).56 (1) G (100).56 (1) G15 3 (100).56 (1) G (130).75 (19) G (130).75 (19) G (130).75 (19) G (130).75 (19) G (130).75 (19) G (130).75 (19) G159 1/ (130).75 (19) G160 1/ (130).75 (19) G161 1/ (130).75 (19) G16 /0 1/0 3 6 (150).9 () G163 /0 1/0 3 6 (150).9 () G16 /0 1/0 1 6 (150).9 () G165 /0 1/0 6 (150).9 () G166 /0 1/0 1/0 1 6 (150).9 () G167 3/0 /0 3 6 (150).9 () G168 3/0 /0 3 6 (150).9 () G169 3/0 /0 1 6 (150).9 () G170 3/0 /0 1/0 1 6 (150).9 () G171 3/0 /0 /0 1/0 6 (150).9 () G17 /0 3/0 3/0 /0 7. (190) 1.3 (33) G173 /0 /0 1/0 7. (190) 1.3 (33) G17 /0 3/0 /0 7. (190) 1.3 (33) G175 /0 /0 3/0 7. (190) 1.3 (33) G /0 7. (190) 1.3 (33) ACSR REDUCING SPICES G06A0A 1/0-1.1 (307) 1. (30) G (530).0 (51) ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

6 BI-META G OVERHEAD INE SPICES AUTOMATIC BI-META (COPPER TO AUMINUM) 6 Provide a permanent electrical and mechanical connection of copper to ACSR, aluminum or aluminum alloy conductors Factory loaded inhibitor to ensure long term corrosion free performance Individually bagged to seal out dirt before use Material: Shell - Aluminum Alloy Jaws on side - Aluminum Alloy Jaws on copper side - Plated Bronze Alloy CONDUCTOR RANGE DIMENSIONS COPPER END AUMINUM END SOID STRAND ACSR AAAC AAC A B G113195A 3 /0-3/0 3/0 - /0 8.5 (0) 1.3 (33) G11185A 3 1/0 1/0 - /0 8.5 (0) 1.3 (33) G11195A 3 /0-3/0 3/0 - /0 8.5 (0) 1.3 (33) G117018A /0 1/0 1/0 /0 8.5 (0) 1.3 (33) G118195A 3/0 /0 /0-3/0 3/0 - /0 8.5 (0) 1.3 (33) G0A (39) 1.0 G0A (39) 1.0 G0A (39) 1.0 G /0 1/0 1/0 13 (331) 1.3 (33) G1118 3/0 / (18/1) (39) 1.8 (6) G (18/1) (50).0 (51) APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

7 SPICES AUTOMATIC GUY WIRE AUMINUM GS For splicing applications with overhead or support guy wires. Fargo GS500x series automatic splices are designed for use on High Strength (HS), Common (Com), Siemens-Martin (SM), Utilities (Util) and Bell System strand. 7-7 Fargo GS50x series automatic splices are designed for use on all guy wire types listed above, plus Extra High Strength (EHS) and Alumoweld (AW). All GS automatic splices will hold a minimum of 90% of the guy wire rated breaking strength. Material: Shell - High Strength Aluminum Alloy Jaws - Plated Steel GS5000 GS5001 GS500 GS500 GS501 GS50 GS503 GS50 PRIMARY STRAND APPICATION 1/ HS, Com, S-M, Util 6.6M Strand (Bell) 5/16 HS, Com, S-M, Util 6M Strand (Bell) 3/8 HS, Com, S-M, Util 10M Strand (Bell) 1/ EHS (Plus HS, Com, S-M, Util) 7#1 (6M) AW 5/16 EHS (Plus HS, Com, S-M, Util) 7#10 (10M), 7#11 (8M) AW 3/8 EHS (Plus HS, Com, S-M, Util) 3#5, 7#8, 7#9, 1.5M, 1M, 16M AW #-/5, #-3/, #1-5/ AWAC 7/16 EHS (Plus HS, Com, S-M, Util) 7#7 (0M), 18M AW #-/5, #1-3/, #1/0-5/ AWAC 1/ EHS {Plus HS, Com, S-M, Util}, 5M, 7#6 AW, #1-/5, #1/0-3/, #/0-5/, #/0-/3 AWAC EHS TO BE USED WITH: DIMENSIONS HS, COM, AW / S-M, UTI, AWAC BE RANGE (IN.) RANGE (MM) A B (163) (3) ANDERSON HUBBE POWER SYSTEMS FARGO APRI (185) 8.1 (06) 8.3 (11) 8.6 (18) 10.0 (5) 11.0 (79) 10.8 (7) 1.1 (8) 1.3 (33) 1.13 (8) 1. (31) 1.8 (38) 1.60 (1) 1.70 (3)

8 AUMINUM VACS OVERHEAD INE SPICES: A AND A-CU COMPRESSION VERSATIE SPICE MINIMUM TENSION 8 ANSI C119., minimum tension, Class 3 connector (5% of conductor breaking strength) For use with either VERSA-CRIMP or conventional compression tools For aluminum to aluminum, aluminum to copper and copper to copper (except as noted) conductor splicing Color coded end plugs for easy die selection D Material: Body - Aluminum Alloy-Tin Plated Factory Inhibited A9CU (90 C Rated) ISTED 61 AUMINUM OR COPPER CONDUCTOR DIMENSIONS CONVENTIONA Δ RANGE VERSA-CRIMP SYSTEM RANGE VERSA-CRIMP TOO TYPE D WT. EACH BS. (KG) I.D. VACS8 #8 Str. Al/Cu #8 Str. Al/Cu 1-7/8 (7.6) 7/8 (.).007 (.003).166 (.) VACS6 #6 Str. Al/Cu #6 Str. Al/Cu /8 (7.6) 7/8 (.).01 (.005).06 (5.) VACS # Str. Al/Cu # Str. Al/Cu -1/8 (5.0) 1 (5.).01 (.009).5 (6.) VACS # Str. Al/Cu #6 # Str. Al/Cu -3/8 (60.3) 1-1/8 (8.6).03 (.013).31 (7.3) VACS1 #1 Str. Al/Cu # #1 Str. Al/Cu -3/8 (60.3) 1-1/8 (8.6).0 (.0).350 (8.9) VACS10 1/0 Str. Al/Cu #8-1/0 Str. Al/Cu -11/16 (68.3) 1-5/16 (33.3).05 (.0).393 (10) VACS0 /0 Str. Al/Cu #-/0 Str. Al/Cu -11/16 (68.3) 1-5/16 (33.3).06 (.03).50 (11.) VACS30 3/0 Str. Al/Cu #-3/0 Str. Al/Cu -11/16 (68.3) 1-5/16 (33.3).08 (.0).50 (1.7) VACS0 /0 Str. Al/Cu #-/0 Str. Al/Cu 3-3/8 (85.7) 1-5/8 (1.3).11 (.05).56 (1.3) VACS50 50 MCM Al/Cu 1/0-50 MCM Al/Cu 3-3/8 (85.7) 1-5/8 (1.3).15 (.07).605 (13.) VACS MCM Al/Cu 1/0-300 MCM Al/Cu 3-3/8 (85.7) 1-5/8 (1.3).19 (.08).660 (16.8) VACS MCM Al/Cu /0-350 MCM Al/Cu 5 (17.0) -7/16 (6.0). (.10).711 (18.1) 3 VACS00 00 MCM Al/Cu 3/0-00 MCM Al/Cu 5 (17.0) -7/16 (6.0).7 (.1).758 (19.) FT VACS MCM Al/Cu /0-500 MCM Al/Cu 5 (17.0) -7/16 (6.0).36 (.16).83 (1.) MCM Al.93 VACS600* 600 MCM Al MCM Cu FT 6 (15.) -15/16 (7.6).7 (.1) (3.) VC8 VACS750* 750 MCM Al MCM Al 6 (15.) -15/16 (7.6).65 (.0) 1.08 (6.1) VACS1000* 1000 MCM Al MCM Al VC8 6-3/8 (161.9) 3-1/8 (79.).97 (.) 1.18 (30) Δ Refer to pages - & -3 for recommended tool and die information. * Not for copper to copper. HIGH VOTAGE APPICATIONS All Aluminum/Copper and Copper ugs (VCE,VAC,VHC, VHCS and VCEC) are rated at 3.5kV. The other U.. listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum U voltage requirement of less than 000 volts, however Anderson recommends these connectors for application through 3.5 KV subject to the manufacturers limitations and recommendations for the insulation material. For further information, contact factory. APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

9 VCSE VCSE55 VCSE66 VCSE77 VCSE88 VCSE99 D *500 for use with aluminum conductor only in range MCM. PASTIC SEC VERSA CRIMP SYSTEM CONDUCTOR RANGE #10(7)-1/0 (19) AAC #8 (6/1)-1/0 (6/1) ACSR #10 Sol.-1/0(19) Cu #8(7)-3/0 (19) AAC #6 (6/1)-/0 (6/1) ACSR #8 Sol.-3/0 (19) Cu # (7)-66.8 (19) AAC # (6/1)-/0 (6/1) ACSR # Sol.-50 (37) Cu /0 (7)-350 (37) AAC /0 (6/1)-336. (18/1) ACSR /0 (7)-350 (37) Cu /0 (7)-500 (37) AAC /0 (6/1)-77 (18/1) ACSR /0(7)-500(37) Cu 500 (19)-750 (61) AAC 77(18/1)-636 (6/7) ACSR 500 (37) Cu OVERHEAD INE SPICES: A AND A-CU COMPRESSION VERSA-CRIMP SPICE MINIMUM TENSION RANGE TAKING VERSA-CRIMP TOO TYPE *500 3 FT FT VC8 AUMINUM VCSE ANSI C119., minimum tension, Class 3 connector (5% of conductor breaking strength) For use with VERSA-CRIMP tools only For aluminum to aluminum and aluminum to copperconductor splicing. Not for copper to copper splicing. Aluminum alloy conductor recommendations include 5005, 601 (AAAC) and ACAR of the same maximum diameter as a given ACSR conductor shown below. In addition, compressed (compact) conductor sizes within listed AAC range are recommended. Material: Body - Aluminum Alloy Factory inhibited (50.8) 3 (76.) (101.6) 5 (17.0) 5 (17.0) 6 (15.) OVERHEAD AND SERVICE ENTRANCE INE SPICES COMPRESSION PASTIC COVER DIMENSIONS D 1/3 (16.7) 1-7/16 (36.5) 1-7/8 (7.6) -3/8 (60.3) -3/8 (60.3) -7/8 (73.0) WT. EACH BS. (KG).063 (.08).11 (.05).18 (.08).7 (.1).8 (.1).5 (.0) 9-9 **RUS isted Snap on cover for minimum tension splice Material: Black thermoplastic DESCRIPTION WT. EACH BS. (KG) SEC ** For use on any 5/8 OD splice up to long.0 (.0) SEC6 ** For use on any.80 OD splice up to long.06 (.03) ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

10 10 AUMINUM VAUS OVERHEAD INE SPICES: A AND A-CU COMPRESSION VERSAtile REDUCING SPICE MINIMUM TENSION ANSI C119., minimum tension, Class 3 connector (5% of conductor breaking strength) For use with either VERSA-CRIMP or conventional compression tools standard die sizes For aluminum to aluminum or aluminum to copper conductor splicing. Not for copper to copper connections. Color coded end caps for quick conductor sizing thru /0 Material: Aluminum Alloy Factory Inhibited with Non-Petroleum Sealant Continued on next page. **RUS isted DIEESS VERSA-CRIMP: 5/8 DIE SIZE: STD. TOOS VERSA CRIMP SERIES TOOING RANGES INSIDE DIAM. (INCHES) A/B ENDS CONVENTIONA DIE-TYPE CONDUCTOR RANGES STANDARD DIE SETS A/B COOR CODED ENDS WT. EACH BS. (KG) VAUS68** #8 Str. # Sol. Al/Cu & #6 ACSR #6 Str. # Sol. Al/Cu & #6 ACSR Blue #8 Str. Al & #8 Str. #6 Sol. Cu #8 Str. Al & #8 Str. #6 Sol. Cu Green (.06) VAUS66** #8 Str. # Sol. Al/CU & #6 ACSR #6 Str. # Sol. Al/Cu & #6 ACSR Blue.057 (.06) VAUS8** #8 Str. # Sol. Al/Cu & #6 # ACSR # Str. # Sol. Al/Cu & # ACSR Orange #8 Str. Al & #8 Str. #6 Sol. Cu #8 Str. Al & #8 Str. #6 Sol. Cu Green (.06) VAUS6** #8 Str. # Sol. Al/Cu & #6 # ACSR # Str. # Sol. Al/Cu & # ACSR Orange #8 Str. # Sol. Al/Cu & #6 ACSR #6 Str. # Sol. Al/Cu & #6 ACSR Blue (.05) VAUS** #8 Str. # Sol. Al/Cu & #6 # ACSR # Str. # Sol. Al/Cu & # ACSR Orange.08 (.0) VAUS18** #8 #1 Str. Al/Cu & #6 # ACSR # #1 Str. Al/Cu & # ACSR Red #8 Str. Al & #8 Str. #6 Sol. Cu #8 Str. Al & #8 Str. #6 Sol. Cu Green (.0) VAUS16** #8 #1 Str. Al/Cu & #6 # ACSR # #1 Str. Al/Cu & # ACSR Red #8 Str. # Sol. Al/Cu &#6 ACSR #6 Str. # Sol. Al/Cu & #6 ACSR Blue (.0) VAUS1** #8 #1 Str. Al/Cu & #6 ACSR # #1 Str. Al/Cu & # ACSR Red #8 Str. # Sol. Al/Cu & #6 # ACSR # Str. # Sol. Al/Cu & # ACSR Orange (.03) VAUS11** #8 #1 Str. Al/Cu & #6 # ACSR # #1 Str. Al/Cu & # ACSR Red.08 (.0) VAUS108** #8 1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR Yellow #8 Str. Al & #8 Str. #6 Sol. Cu #8 Str. Al & #8 Str. #6 Sol. Cu Green (.0) VAUS106** #8 1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR Yellow #8 Str. # Sol. Al/Cu & #6 ACSR #6 Str. # Sol. Al/Cu & #6 ACSR Blue (.0) VAUS10** #8 1/0 Str. Al Cu/ASCR 1/0 Str. Al/Cu/ACSR Yellow #8 Str. # Sol. Al/Cu & #6 # ACSR # Str. # Sol. Al/Cu & # ACSR Orange (.01) VAUS101** #8 1/0 Str. Al/Cu/ASCR 1/0 Str. Al/Cu/ACSR Yellow #8 #1 Str. Al/Cu & #6 # ACSR # #1 Str. Al/Cu & # ACSR Red (.00) VAUS1010** #8 1/0 Str. Al/Cu/ASCR /0 Str. Al/Cu/ACSR Yellow.039 (.018) VAUSH101** VAUSH1010** VAUS06** VAUS0** DIEESS VERSA-CRIMP: # 1/0 Str. Al/Cu/ACSR #6 #1 Str. AI/CU & #6 # ACSR # 1/0 Str. Al/Cu/ACSR # 1/0 Str. Al/Cu/ACSR #.0 Str. Al/Cu/ACSR #8 Str. # Sol. Al/Cu & #6 ACSR # /0 Str. Al/Cu/ACSR #8 Str. # Sol. Al/Cu & #6 # ACSR /16 15/ /8 DIE SIZE EEI-8A Burndy BG Index 3 Kearney 5/8 T&B/Blackburn TU5.80 DIE SIZE: STD. TOOS 1/0 Str. Al/Cu/ACSR-/0 Comp # #1 Str. Al/Cu & # ACSR #1 1/0 Comp. 1/0 Str. Al/Cu/ACSR /0 Comp. 1/0 Str. Al/Cu/ACSR /0 Comp. /0 Str. Al/Cu/ACSR 3/0 Comp #6 Str. # Sol. Al/Cu & #6 ACSR /0 Str. Al/Cu/ACSR-3/0 Comp. # Str. # Sol. Al/Cu & # ACSR APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO.906 EEI-IIA Burndy K80/9 1-7/8 1-7/8 Yellow Red Yellow Gray Blue Gray Orange.80 DIE SIZE.0 (.11).0 (.11).13 (.097).10 (.095)

11 OVERHEAD INE SPICES: A AND A-CU COMPRESSION VERSAtile REDUCING SPICE MINIMUM TENSION (CONTINUED) DIEESS VERSA-CRIMP: Δ For -350/-500 Conductor range is limited to conventional tool/die wire range. **RUS isted 1-5/16 Die Size.80 DIE SIZE: STD. TOOS AUMINUM ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01 VAUS VERSA CRIMP SERIES TOOING RANGES INSIDE DIAM. (INCHES) A/B ENDS CONVENTIONA DIE-TYPE CONDUCTOR RANGES STANDARD DIE SETS A/B COOR CODED ENDS WT. EACH BS. (KG) VAUS01** #-/0 Str. Al/Cu/ACSR /0 Str. Al/Cu/ACSR-3/0 Comp. Gray #6-#1 Str. Al/Cu & #6-# ACSR #-#1 Str. Al/Cu & # ACSR-#1-1/0 Comp. Red (.09) VAUS010** #-/0 Str. Al/Cu/ACSR /0 Str. Al/Cu/ACSR-3/0 Comp. Gray #-1/0 Str. Al/Cu/ACSR 1/0 Str. Al.Cu/ACSR-/0 Comp. Yellow (.088) VAUS00** #-/0 Str. Al/Cu/ACSR /0 Str. Al/Cu/ACSR-3/0 Comp. Gray.189 (.086) VAUS30** #-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-/0 Comp. Black #8 Str.-# Sol. Al/Cu & #6-# ACSR # Str.-# Sol. Al/Cu & # ACSR Orange (.091) VAUS301** #-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-/0 Comp. Black #6-#1 Str. Al/Cu & #6-# ACSR #-#1 Str. Al/Cu & # ACSR-#1-1/0 Comp. Red (.088) VAUS3010** #-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-/0 Comp. Black #-1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR-/0 Comp. Yellow (.08) VAUS300** #-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-/0 Comp. Black #-/0 Str. Al/Cu/ACSR /0 Str. Al/Cu/ACSR-3/0 Comp. Gray (.08) VAUS3030** #-3/0 Str. Al/Cu/ACSR /0 Str. Al/Cu/ACSR-/0 Comp. Black.171 (.078) VAUS0** # Sol. -50 Str. Al/Cu & #5-/0 ACSR /0-50 Str. Al/Cu/ACSR Comp. Pink #8 Str.-# Sol. Al/Cu & #6-# ACSR # Str.-# Sol. Al/Cu & # ACSR Orange (.08) VAUS01** # Sol.-50 Str. Al/Cu & #5-/0 ACSR /0-50 Str. Al/Cu /0 ACSR Comp. Pink #6-#1 Str. Al/Cu & #6-# ACSR #-#1 Str. Al/Cu/ACSR-#1-1/0 Comp. Red (.083) VAUS010** # Sol.-50 Str. Al/Cu & #5-/0 ACSR /0-50 Str. Al/Cu /0 ACSR Comp. Pink #-1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR-/0 Comp. Yellow (.080) VAUS00** # Sol.-50 Str. Al/Cu& #5-/0 ACSR /0-50 Str. Al/Cu /0 ACSR Comp. Pink #-/0 Str. Al/Cu/ACSR /0 Str. Al/Cu/ACSR-3/0 Comp. Gray (.077) VAUS030** # Sol.-50 Str. Al/Cu & #5-/0 ACSR /0-50 Str. Al/Cu /0 ACSR Comp. Pink #-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-3/0 Comp. Black (.073) VAUS00** # Sol.-50 Str. Al/Cu & #5-/0 ACSR /0-50 Str. Al/Cu /0 ACSR Comp. Pink.151 (.068) VAUS3930** #1-350 Str. & # /1 ACSR Str. & /1 ACSR Comp. None #-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-/0 Comp. Black (.10) VAUS390** #1-350 Str. & # /1 ACSR Str. & /1 ACSR Comp. None # Sol.-50 Str. Al/Cu & #5-/0 ACSR /0-50 Str.-/0 ACSR Comp. Pink (.10) VAUS3939** #1-350 Str. & # /1 ACSR Str. & /1 ACSR Comp. None.190 (.10) DIEESS VERSA-CRIMP: 1-1/8 DIE SIZE: STD. TOOS VAUS300300**Δ 3/0-300 Str. Al/Cu Str. Al/Cu & Comp None 3/0 (6/1)-66.8 (18/1) ACSR /0 (6/1)-66.8 (18/1) ACSR (.17) VAUS350350**Δ 3/0-350 Str. Al/Cu Str. Al/Cu & Comp None 3/0(6/1)-336. (18/1) ACSR 66.8 (6/1)-336.(18/1) ACSR (.158) VAUS0000**Δ /0-00 Str. Al/Cu Str. Al/Cu & 500 Comp None /0 (6/1)-397-(18/1) ACSR 336. (36/1)-397 (18/1) ACSR (.1) VAUS500500**Δ VAUS7575** VAUS575575** VAUS675675** /0-500 Str. Al/Cu /0 (6/1)-77 (18/1) ACSR DIEESS VERSA-CRIMP: /VC8 /0-500 Str. /0 (6/1)-77 (18/1) ACSR Str. 66.8(18/1) /1 ACSR Str (18/1)-605 6/7 ACSR /16-7/16 1-1/8 Die Size Str. Al/Cu & 600 Comp (18/1)-77 (18/1) ACSR 7-1/ Str. & 600 Comp. 397 (18/1) (/7) (6/7) (30/7) ACSR 77 (36/1) (18/1) ACSR Str. & Comp. 77 (18/1) (/7) (6/7) ACSR 556 (36/1) (18/1) ACSR Str. & Comp. 77 (30/7) (18/1) (/7) (6/7) (30/7) ACSR 636 (18/1) (36/1) 605 (36/1) (/7) (6/7) ACSR 3-9/16 3-9/16 EEI-11A Burndy K80 Index 9 T&B TX 76 76H Blackburn 80 B9EA Kearney: 80 EEI-13A Burndy: U3 ART Index 655 & 7 705, 316 Kearney: 1 1/8 T&B 96 & 96H Blackburn: B80EA 1-5/16 DIE SIZE: STD. TOOS EEI-1A Burndy: Index 317,37,719 Kearney: 1-5/16 T&B 106H Blackburn: B0AH None None None None.75 (.15).78 (.389).66 (.307).78 (.389) 11-11

12 1 AUMINUM VCSN ANSI C119., partial tension, Class connector (0% of conductor breaking strength) For use with VERSA-CRIMP Type (all) tools, only For Aluminum or ACSR messenger-neutrals of triplex service drop cables and loop jumper use Material: Body Aluminum Alloy Factory Inhibited VCSN AUMINUM VANS # (7)-1/0 (19) AAC #6 (6/1)-1/0 (6/1) ACSR OVERHEAD INE SPICES: A/ACSR COMPRESSION VERSA-CRIMP SPICE PARTIA TENSION AUMINUM CONDUCTOR RANGE VERSA-CRIMP TOO DIMENSIONS MAIN TAP TYPE D # (7)-1/0 (19) AAC 3-9/16 #6 (6/1) - 1/0 (6/1) ACSR (90.5) OVERHEAD INE SPICES COMPRESSION VERSAtile TRIPEX NEUTRA SPICE PARTIA TENSION For use with VERSA-CRIMP or conventional tools. Connectors have partial tension (0%) rating when used with Aluminum and ACSR conductors. Connectors have minimum tension (5%) rating when used with copper conductors. Connectors are for splicing ACSR/Aluminum conductors to ACSR/Aluminum or ACSR/Aluminum to copper. Not for copper to copper Material: Aluminum Alloy Factory Inhibited with Non-Rubber Swelling Inhibitor and Sealed With Color Coded Caps D D 1-3/ (.5) WT. EACH BS. (KG).1 (.05) VANS66 VANS VANS11 VERSA-CRIMP SYSTEM CONDUCTOR RANGE #8 Str.-# Sol. Al/Cu #6 ACSR #8 Str.-# Sol. Al/Cu #6-# ACSR #8-#1 Str. Al/Cu #6-# ACSR AUMINUM OR COPPER CONDUCTOR VERSA-CRIMP TOO TYPE CONVENTIONA WIRE RANGE #6 Str.-# Sol. Al/Cu #6 ACSR #-# Sol. Al/Cu # ACSR #-#1 Str. Al/Cu # ACSR DIMENSIONS CONVENTIONA COOR TOO-DIES CODED END D EEI-8A Burndy: BG Index 3 OH-5 Kearney: 5/8 Nose Somerset: TU, 5 Blackburn: 5/8 Nose Blue Orange VANS1010 #8-1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR Yellow Red -1/ (107.95) -1/ (107.95) -1/ (107.95) 5 (17.0) -1/16 (5.39) -1/16 (5.39) -1/16 (5.39) -7/16 (61.91) WT. EACH BS. (KG).13 (.055).115 (.05).093 (.0).097 (.0) APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

13 OVERHEAD INE SPICES: AAC AND ACSR COMPRESSION VERSA-CRIMP SPICE PARTIA TENSION RANGE TAKING AUMINUM VCJSR D For use with VERSA-CRIMP tools only For aluminum, ACSR, compact, 5005, 601 and ACAR partial tension (0% tension rating) conductor jumper splicing Aluminum alloy conductor recommendations include 5005 and ACAR having the same diameter as a given ACSR conductor shown below. In addition, compressed (compact) conductor sizes within the same decimal conductor range are recommended. Use 800 series connectors only, if 601 (AAAC) aluminum alloy conductor is involved Material: Body - Aluminum Alloy Factory inhibited VCJS36R VCJS50R CONDUCTOR RANGE VERSA CRIMP TOOS VERSA-CRIMP TOO DIMENSIONS AAC ACSR TYPE D #6 (7), # (7), #3 (7), #6 (6/1), # (7/1), (6/1), -5/8-1/ # (19, 7) # (7/1), (6/1) (117.5) (57.) # (19, 7), #1 (19, 7), 1/0 (19, 7), # (7/1, 6/1), #1 (6/1), 1/0 (6/1), 6-15/16 /0 (19, 7) /0 (6/1) (15.) (7.6) 1/0 (6/1), /0 (6/1), 3/0 (6/1), 7-3/8 3-5/8 /0 (6/1) (187.3) (9.1) VCJS61R 1/0 (19, 7), /0 (19, 7), 3/0 (19, 7), /0 (19, 7) VCJS85R VCJS831R /0 (19, 7), 50 (37, 19), 66.8 (19, 7) 300 (37, 19), 336. (19), 350 (37, 19), (19), 00 (37), 50 (37, 19), 77 (37, 19), 500 (37, 19) 50 (37, 19), 66.8 (19, 7), 300 (37), 336. (19), 350 (37,19), (19), 00 (37), 50 (37, 19), 77 (37, 19) 500 (37, 19), (37, 19) VCJS83R (37), 636 (37) VCJS833R 700 (61), (61, 37) 795 (61, 37) VCJS83R 900 (61, 37) VCJS835R 95 (61, 37), 1000 (61), 1,033.5 (61, 37) /0 (6/1), 66.8 (18/1) 336. (18/1, 36/1), (18/1, 36/1), 77 (18/1, 36/1) 66.8 (30/7, 6/7, /7, 18/1), 366. (30/7, 6/7, /7, 18/1), (6/7, /7, 18/1), 77 (6/7, /7,18/1) 77 (6/7), (6/7, /7), 636 (18/1, 36/1) 605 (6/7, /7), 636 (6/7, /7, 18/1), (/7), 795 (36/1) 715 (6/ 7), 795 (6/7, 5/7, /7, 5/7, 36/1) 1,033.5 (61, 37), 1,000 (61) 95 (5/7, 5/7) 900 (5/7, 5/7) 795 (6/7) FT VC8 7-3/8 (187.3) 11-1/8 (8.6) 1-7/8 (37.0) 1-7/8 (37.0) 1-5/8 (371.5) 1-5/8 (371.5) 3-5/8 (9.1) 5-1/ (139.7) 6-3/8 (161.9) 6-3/8 (161.9) 7-1/ (18.) 7-1/ (18.) WT. EACH BS. (KG).13 (.06).5 (.11).5 (.0).5 (.) 1.3 (.59) 1.6 (.7) 1.7 (.77).1 (.95). (1.00) ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

14 AUMINUM PTA OVERHEAD INE SPICES: AAC COMPRESSION PARTIA-TENSION SPICES AAC 1 For use with VERSA-CRIMP or standard die-type compression tools Prefilled with tension compound Installed with popular compression dies from several manufacturers. Shorter barrel requires fewer crimps than higher strength splices for alloyed conductors. Meets industry requirements for partial tension (0% of conductor breaking strength) splicing per ANSI C119., Class Material: Aluminum Note: Refer to type PTR partial tension sleeves for splicing higher strength alloyed aluminum condutors and single core ACSR. PTA10 PTA0 PTA337 PTA350 PTA77 PTA556 PTA636 PTA795 CONDUCTOR RANGE CONVENTIONA DIES DIEESS AAC COMPACT STR. BURNDY INDEX KEARNEY T & B EEI DIES TOO: ANDERSON 1/0 (7,19) Str /8 BG, 3 5 8A ( ) 5/8-1 /0 (7,19) Str A ( ) , 705, 1-1/ or 37 Str. ( ) / , 1-1/8-1 19, 36, 61 Str. ( ) /8-96 FT 77 or , or 37 Str. ( ) 6 1-1/ A FT , 19 or 37 Str. ( ) / A VC Str. ( ) / 15 VC or 61 Str. ( ) 3 1-5/8 10 VC8 ENGTH 3.5 (83).00 (10).50 (11) 6.50 (165) 6.5 (159) 8.75 () 7.50 (191) 10.5 (67) WT. 100 BS. (KG) 8 () 16 (7) 7 (1) (19) 5 (0) 93 () 87 (39) 151 (68) APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

15 OVERHEAD INE SPICES: AAC AND ACSR COMPRESSION PARTIA-TENSION SPICES ACSR AUMINUM PTR For use with VERSA-CRIMP or standard die-type compression tools Positive center stop Installed with popular compression dies from several manufacturers Prefilled with tension compound Meets industry requirements for partial tension (0% of conductor breaking strength) splicing per ANSI C119., Class Material: Aluminum Note: Refer to type PTA partial tension sleeves for AAC application only PTR5 PTR10 PTR05 PTR30 PTR0 PTR336 PTR397 PTR77 PTR795 CONDUCTOR RANGE TYPES BURNDY CONVENTIONA DIES KEARNEY EEI DIEESS TOO: & SIZES INDEX REF. DIES ANDERSON ACSR (7/1) 737 ACSR (6/1) C, 167, 7 or 10A AAAC (7) ( ) or AAC (7) 1/0 ACSR (6/1) 1/0 AAAC (7) 1/0 AAC (7) /0 ACSR (6/1) /0 AAAC (7) /0 AAC (7) 3/0 ACSR (6/1) 3/0 AAAC (7) 3/0 AAC (7) /0 ACSR (6/1) /0 AAAC (7) /0 AAC (7) 336. ACSR (18/1) 336. AAC (19) ACSR (18/1) 350 & AAC 7 ACSR (18/1) 77 & 500 AAC 795 ACSR (36/1) 795 AAC Rd. Str ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) C, 167, or or 77 10A 659 3/ A /8-1 or 1-1/8-1-1/8-1 or 1-1/8-1A 13A 1A -3 -FT -3 -FT /16 15A VC / VC8 ENGTH 5.00 (17) 6.5 (159) 5.6 (13) 5.5 (133) 5.5 (133) 5.5 (133) 5.75 (16) 9.00 (7) (79) WT. 100 BS. (KG) (10) 5 (11) 5 (11) 5 (11) 3 (15) 37 (17) 0 (18) 86 (39) 13 (65) ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

16 AUMINUM FTA OVERHEAD INE SPICES COMPRESSION FU TENSION SPICES-AAC 16 Positive center stop and tapered ends Installed with popular compression tools and dies from several manufacturers, or VERSA-CRIMP dieless system Prefilled with tension joint compound Meets industry requirements for full tension (95% of conductor breaking strength) splicing per ANSI C119., Class 1 Material: Aluminum Note: Refer to type FTR full tension sleeves for splicing higher strength alloyed aluminum conductors and single core ACSR. FTR splices may also substitute for FTA splice installations. CONDUCTOR RANGE CONVENTIONA DIES AUMINUM BURNDY INDEX KEARNEY REF. EEI DIES ENGTH WT. 100 BS. (KG) FTA10 1/0 (7, 19) Str ( ) BG, 3 5/8 5/8-1 8A 7.5 (18) 16 (7) FTA0 /0 (7, 19) Str ( ) 5 5/8 5/8-1 9A 9.5 (3) 5 (11) FTA0 /0 (7, 19) Str ( ) A (66) 0 (18) FTA or 37 Str ( ) 31, 705, / / (51) 58 (6) FTA , 36, 61 Str ( ) 90, / / (79) 70 (3) FTA397 FTA77 FTA556 FTA636 FTA795* Str. 77 or or 37 Str or 37 Str Str or 61 Str ( ) ( ) ( ) ( ) ( ) 68, / /8-13A 317, 37, 6 1-1/8-1A 61, /16 15A / 3 1-1/ 1-5/8 1.5 (311) 1.75 (3) 1.75 (3) 13.5 (33) 13.6 (36) 8 (38) 113 (51) 138 (63) 157 (71) 199 (90) Compact strand sizes within the O.D. inch range may be used. *Consult factory; FTR795 option also available. APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

17 OVERHEAD INE SPICES COMPRESSION FU TENSION JIFFY SPICES ACSR (and AAC) AUMINUM FTR Positive center stop and tapered ends Installed with popular compression tools and dies from several manufacturers Prefilled with tension joint compound Meets industry requirements for full tension (95% of conductor breaking strength) splicing per ANSI C119., Class 1 Material: Aluminum Note: Refer to type FTA full tension sleeves for AAC application only FTR** FTR** FTR5** FTR10** FTR05** FTR30** FTR0** FTR336 FTR397 FTR77 FTA795 CONDUCTOR RANGE CONVENTIONA DIES TYPES & BURNDY KEARNEY EEI SIZES INDEX REF. DIES ACSR (7/1) ACSR (6/1) A AAAC (7) (.6-6.5) (305) AAC (7) ACSR (6/1) AAAC (7) AAC (7) ACSR (7/1) ACSR (6/1) AAAC (7) AAC (7) 1/0 ACSR (6/1) 1/0 AAAC (7) 1/0 AAC (7) /0 ACSR (6/1) /0 AAAC (7) /0 AAC (7) 3/0 ACSR (6/1) 3/0 AAAC (7) 3/0 AAC (7) /0 ACSR (6/1) /0 AAAC (7) /0 AAC (7) 336. ACSR (18/1) 336. AAC (19) ACSR (18/1) 350 & AAC 77 ACSR (18/1) 7 & 500 AAC 795 ACSR (36/1) 795 AAC ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Compact and 5005 cable sizes within the O.D. range may be used. **RUS isted BG, 3 or 687 C 167, 7, 70 C 167, 660, 7, /8 5/8-1 or or 3/ 9A 10A A or 1-1A /8-1 13A or /8-1A /16 15A 3 1-1/ ENGTH 10.5 (60) (330) 1.75 (375) (06) 18.5 (68) (70) 19.5 (89).00 (559) 3.00 (58) 5.00 (635) WT. 100 BS. (KG) 37 (17) 8 (13) (6) 70 (3) 88 (0) 10 (5) 137 (6) 15 (70) 0 (100) 35 (17) ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

18 AUMINUM VCA, VCAR, VCR VERSA-CRIMP AUMINUM COMPRESSION SPICE TYPES VC-A, VC-AR, VC-R FU TENSION-AAC and ACSR 18 ANSI C119., full tension, Class 1 connector (95% of conductor breaking strength) For use with VERSA-CRIMP tools only For aluminum, single core ACSR, 5005, 601 and compact conductor splicing Compressed (compact) conductor sizes within the same decimal conductor range are recommended. One piece splice eliminates cutting back the aluminum strands on ACSR conductors, except on VC90R which requires the outside layer (aluminum strands) to be cut back 5 on each side. D Material: Body Aluminum Alloy Factory inhibited CONDUCTOR RANGE VERSA CRIMP TOOS VERSA-CRIMP TOO DIMENSIONS AAC ACSR 5005 OR AAAC (601) TYPE Δ D VC36R** # (19), # (7), # (7) # (7/1, 6/1), # (7/1, 6/1) 8.69 (7), 77.7 (7) 13-1/8 6-1/ (333.) (165.1) VC10A # (7), # (7), 1/0 (7) 6-1/ 3-1/16 (158.8) (77.8) VCR # (7), 1/0 (19), 1/0 (7) # (7/1, 6/1), 1/0 (6/1) 77.7 (7), 13.3 (7) 15-7/8 7-7/8 (03.) (00.0) VC50R** # (7), 1/0 (19,7), /0 (19,7) # (6/1, 7/1), 1/0 (6/1), 17-1/ 8-9/ (7), 155. (7) /0 (6/1) (38.) (17.5) VC58A 1/0 (7), /0 (7), 3/0 (7), /0 (7) 7-5/8 3-3/ (193.7) (95.3) 1R** 1/0 (19,7), /0 (7), 3/0 (7), 1/0 (6/1), /0 (6/1), 3/0 (6/1), 155. (7), (7), 19-7/8 9-3/ /0 (7) /0 (6/1) 6.9 (7) (50.8) (7.7) VC70A /0 (7), 66.8 (19,7), (19) (8.6) (11.7) VC80R** /0 (7), 6.8 (19,7), /0 (6/1), 6.8 (18/1), -7/8 11-3/ (19), (19) 336. (18/1), (18/1) (581.0) (88.9) VC85A 336. (19), (19), A 11-3/ 5-13/16 77 (37,19) except 350 (98.5) (17.6) VC90R (18/1), 77 (18/1) -7/8 11-3/8 (581.0) (88.9) 77 (37, 19), 500 (37,19) (18/1), 77 (18/1), 1-5/8 10-3/ *VC81R (37,19) (18/1) (59.3) (73.0) VC8 1-5/8 10-3/ *VC813AR 65. (19), 70.8 (37) (59.3) (73.0) *VC813R 636 (37), 795 (61, 37) 795 (36/1) 1-5/8 10-3/ (59.3) (73.0) * Three end crimps are factory formed to minimize vibration damage to conductor. **RUS isted Δ For 350/500 connector and conductor recommendations, see application label in top of tool case. WT. EACH BS. (KG).3 (.1).16 (.07).55 (.5).65 (.9).35 (.16) 1.1 (.50).8 (.) 1.6 (.7).81 (.37) 1.7 (.77).3 (1.0).5 (1.13).5 (1.13) APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

19 OVERHEAD INE SPICES-CU COMPRESSION VERSAtile COMPRESSION SPICE MINIMUM TENSION STANDARD ENGTH COPPER VHSS ANSI C119., minimum tension, Class 3 connector (5% of conductor breaking strength) For use with either VERSA-CRIMP or conventional compression tools For copper stranded conductor, only Color coded bands for easy die selection D Material: Copper Tin plated ISTED 61 COPPER CONDUCTOR VERSA-CRIMP DIMENSIONS CONVENTIONA WIRE SIZE VERSA CRIMP SYSTEM RANGE TOO TYPE D VHSS6 #6 Str. #6 Str. 1-3/ 13/ (.5) (0.6) VHSS # Str. # Str / 13/16 (.5) (0.6) VHSS # Str. #6 # Str. 1-7/8 7/8 (7.6) (.) VHSS1 #1 Str. #6-#1 Str. 1-7/8 7/8 (7.6) (.) 1-7/8 7/8 VHSS10 1/0 Str. #6-1/0 Str. (7.6) (.) 15/16 VHSS0 /0 Str. #-/0 Str. (50.8) (3.81) -1/8 1 VHSS30 3/0 Str. #-3/0 Str. VC7 (53.98) (5.) -1/8 1 VHSS0 /0 Str. #1-/0 Str. (53.98) (5.) VHSS50 50 MCM 1/0-50 MCM -1/ 1-1/16 (57.15) (6.97) VHSS MCM /0-300 MCM -1/ 1-1/16 (57.15) (6.97) -3/8 1-1/8 VHSS MCM 3/0-350 MCM -3 (60.3) (8.58) VC7-1/ 1-3/16 VHSS00 00 MCM /0-00 MCM FT (63.5) (30.16) VC7FT -7/8 1-3/8 VHSS MCM /0-500 MCM VC8** (73.0) (3.9) VHSS MCM MCM -7/8 1-3/8 FT (73.0) (3.9) VC7FT VHSS MCM MCM VC8** I.D. (INCHES) ANDERSON HUBBE POWER SYSTEMS FARGO APRI /8 (85.7) 1-5/8 (1.8) WT. EACH BS. (KG).0 (.01).06 (.01).0 (.018).05 (.03).057 (.05).065 (.09).09 (.0).09 (.0).1 (.05).1 (.063).17 (.077).31 (.1).3 (.1).1 (.19).5 (.) Refer to page - for recommended tool and die information. **Type VC8 compression tool crimping range is MCM Cu. HIGH VOTAGE APPICATIONS All Aluminum/Copper and Copper ugs (VCE, VAC, VHC, VHCS and VCEC) are rated at 3.5 KV. The other U.. listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum U voltage requirement of less than 000 volts, however Anderson recommends these connectors for application through 3.5 kv subject to manufacturers limitations for insulation material. For further information, contact factory

20 COPPER VHS OVERHEAD INE SPICES-CU COMPRESSION, VERSAtile SPICE MINIMUM TENSION, HEAVY DUTY ENGTH 0 ANSI C119., minimum tension, Class 3 connector (5% of conductor breaking strength) For use with either VERSA-CRIMP or conventional compression tools For copper stranded conductor, only Color coded bands for easy die selection Material: Copper Tin plated ISTED 61 DIMENSIONS COPPER CONDUCTOR VERSA-CRIMP CONVENTIONA VERSA CRIMP TOO WIRE SIZE SYSTEM RANGE TYPE D -3/8 1-1/8 VHS6** #6 Str. #6 Str. 350 (60.3) (8.58) 500-3/8 1-1/8 VHS** # Str. # Str. (60.3) (8.58) -3/8 1-1/ VHS** # Str. #6 # Str. (60.3) (31.75) -7/8 1-3/8 VHS1** #1 Str. #6-#1 Str. (73.0) (3.9) -7/8 1-3/8 VHS10** 1/0 Str. #6-1/0 Str. (73.0) (3.9) 3-1/8 1-1/ VHS0** /0 Str. #-/0 Str. (79.38) (38.1) 3-1/8 1-1/ VHS30** 3/0 Str. #-3/0 Str. VC7 (79.38) (38.1) 3-3/8 1-5/8 VHS0** /0 Str. #1-/0 Str. (85.7) (1.8) 3-3/8 1-5/8 VHS50** 50 MCM 1/0-50 MCM (85.7) (1.8) -1/8 VHS300** 300 MCM /0-300 MCM (10.78) (50.8) -1/8 VHS350** 350 MCM 3/0-350 MCM -3 (10.78) (50.8) VC7-3/8-1/8 VHS00** 00 MCM /0-00 MCM FT (111.1) (53.98) VC7FT -5/8-1/ VHS500** 500 MCM /0-500 MCM VC8*** (117.8) (57.15) 5-1/ -11/16 VHS600** 600 MCM MCM FT (139.7) (68.6) VC7FT 5-7/8-7/8 VHS750** 750 MCM MCM VC8*** (19.) (73.0) 6-15/16 VHS800** 800 MCM MCM (15.) (7.61) VHS1000** 1000 MCM MCM VC8*** VHS1500** 1500 MCM MCM 6-1/8 6-1/ 3 3-3/16 (155.58) (165.1) (76.) (80.96) WT. EACH BS. (KG).03 (.01).03 (.01).05 (.0).06 (.07).08 (.036).09 (.0).11 (.05).15 (.068).18 (.08).5 (.11).9 (.13).37 (.17).50 (.3).78 (.35).9 (.3) 1.09 (.9) 1.30 (.59).0 (1.00) I.D. (INCHES) Refer to page -5 for recommended tool and die information. ** RUS isted ***Type VC8 tool crimping range is MCM Cu. HIGH VOTAGE APPICATIONS All Aluminum/Copper and Copper ugs (VCE, VAC, VHC, VHCS and VCEC) are rated at 3.5 KV. The other U.. listed compression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum U voltage requirement of less than 000 volts, however Anderson recommends these connectors for application through 3.5 KV subject to the manufacturers limitations and recommendations for the insulation material. For further information, contact factory. APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO D

21 OVERHEAD INE SPICES COPPER COMPRESSION VERSA-CRIMP COMPRESSION SPICE FU TENSION COPPER (RANGE TAKING) COPPER VCC 1-1 D ANSI C119., full tension, Class 1 connector (95% of conductor breaking strength) For use with VERSA-CRIMP Type and VC7 series tools, only For copper and copperweld conductors and compact sizes within concentric wire ranges are recommended. Material: Body Copper Factory inhibited CONDUCTOR RANGE VERSA-CRIMP TOO DIMENSIONS COPPER COPPERWED TYPE D VCC8** #6 (7, 1), #5 (7, 1) -5/8-1/ 8A, 7A, 6A # (7, 1) (117.5) (57.) 5-7/8-7/8 VCC37** # (7, 1), #1 (7) A (19.) (73.0) 8-3/8-1/8 VCC #1 (7, 19), 1/0 (7, 19) A, 1/0F (1.7) (10.8) VC7 8-3/8-1/8 VCC6** 1/0 (7, 19), /0 (7, 19) (1.7) (10.8) VCC57 3/0 (7, 19), /0 (7, 19) 8-3/8-1/8 (1.7) (10.8) **RUS isted WT. EACH BS. (KG).16 (.07).3 (.1).7 (.33).76 (.3).95 (.3) I.D. (INCHES) ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

22 VAC/VACS/VACT Anderson/Burndy CONVENTIONA COMPRESSION DIE TOOING (Crimps per Connection) ANDERSON VERSA-CRIMP COMPRESSION TOOS (Crimps per Connection) Burndy Indentor s (1 Crimp) Burndy (Crimps) VERSA-CRIMP s (Number of Crimps) Wire Size Y86RB (Indentor) Y8B (Indentor) Y3B (Indentor) Y3A (Indentor) MY-9 Y86RB Y8B Y3B s Y35 Y39 Y3A Die Die Die Die Die Die Nest Nest Nest Nest Die Index No. Die Color Code (AWG or MCM) VC8 A NIBS FT 350 * 500 V-C s Wire Range (AWG or MCM) Catalog Number VAC VACS () VACT () #8 U8CABT Blue 37 #8-8 #8 1 1 BCD (Y3PA) ACD (Y3PA) #6 # # #1 1/0 /0 3/0 /0 B6CD U6CABT A6CAB Gray 36 #6 # # #1 1/0 /0 3/0 / #6 1 1 B1CD (Y3PA) B6D (Y3PA) A1CD (Y3PA) A6D (Y3PA) CCAB BCD BCD B1CD B5D B6D B7D B8D B9D B30D B31D B3D UCABT * ACAB ACAB A5AR A5AR A6AR A7AR A8AR A9AR A30AR Green # UCABT Pink 38 - #6-# B7D (Y3PR-5) A7D (Y3PR-5) U5ART * Tan 96-1 #8-#1 B7D (Y3PR-5) B9D (Y3PR-5) B30D (Y3PR-5) B31D (Y3PR-5) B3D (Y3PR-5) A7D (Y3PR-5) A9D (Y3PR-5) A30D (Y3PR-5) A31D (Y3PR-5) A3D (Y3PR-5) U5ART * Tan 96-1/0 #8-1/0 U6ART Olive 97 -/0 #-/0 U7ART U8ART U9ART U30ART U31ART U3ART () Ruby 67-3/0 #-3/0 F8AR C8AR White 98 -/0 #-/0 3 3 F9AR F30AR F31AR F3AR C9AR C30AR C31AR C3AR Red / F3D (Y8PR-1) C3D (Y8PR-1) No Die A3D (Y3PR-11) Blue / F35D (Y8PR-1) F36D (Y8PR-1) C35D (Y8PR-1) C36D (Y8PR-1) Brown / Green / F3AR C3AR No Die Required U3ART () Green / F3AR C3AR U3ART () A Pink A CU -600 F3AR FAR C3AR CAR U3ART () A Pink A 500 CU -750 F6D (Y8PR-1) C6D (Y8PR-1) A Brown A TBM-8 ONY H Anderson HC-1 Dies, Burndy s Y-35 Dies and Blackburn s JB-1 Dies are interchangeable. VAC ug sizes -350 to -500 take 1 less crimp ( s) than shown. Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Blackburn, Kearney & T&B Hyd. s/dies. The VAC lugs are qualified for U HV applications. () The VACS sleeves and VACT tee connectors are for A to A or A to CU connections ONY. (NOT for CU to CU connections). * Not U isted-pending completion of test. APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

23 VAC/VACS/VACT Anderson/Others CONVENTIONA COMPRESSION DIE TOOING (Crimps per Connection) ANDERSON VERSA-CRIMP COMPRESSION TOOS (Crimps per Connection) Thomas & Betts (Crimps) Kearney (Crimps) Blackburn (Crimps) VERSA-CRIMP s (Number of Crimps) 15 Ton Hyd. 1 Ton Hyd. s TBM5 TBM8 s (No. of Crimps) JB-1A OD-58 WH- PH- Die Die Die WH-1 PH-1 Die Die Die O-5 Die Color Code Wire Size (AWG or MCM) VC8 A NIBS FT 350 * 500 V-C s Wire Range (AWG or MCM) Catalog Number VAC VACS () VACT () Blue 1/ B73CH BY17C Blue #8-8 # H 6 71H 76 87H 9H 99H H 106H H 76H 87H 9H 99H 96H () 106H 106H Gray Green Pink Tan Tan Olive Ruby +White () +Red +Blue +Brown 5/16 B7CH BY19C BY1C BY3C BY3C () BY5C () BY31C () BY7C BY35C BY37C Gray #6 # # #1 1/0 /0 3/0 / # /8 UCABT * Green - # 1/ BO6CH Pink - #6-# 9/16 () U5ART * Tan -1 #8-#1 9/16 () U5ART * Tan -1/0 #8-1/0 5/8-1 () B09CH Olive -/0 #-/0 11/16 B6CH B10CH1 B11CH B61EA B1CH1 B80EA B80EA B0AH B0AH Ruby -3/0 #-3/0 781 White -/0 #-/ Red -50 1/ /3 Blue / /8-1 Brown -350 / /8-1 Green -00 3/ /8- Green -500 / /16 () A Pink A CU /16 () A Pink A 500 CU A Brown A TBM-8 ONY H Anderson HC-1 Dies, Burndy s Y-35 Dies and Blackburn s JB-1 Dies are interchangeable. VAC ug sizes -350 to -500 take 1 less crimp ( s) than shown. Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Blackburn, Kearney & T&B Hyd. s/dies. The VAC lugs are qualified for U HV applications. () The VACS sleeves and VACT tee connectors are for A to A or A to CU connections ONY. (NOT for CU to CU connections). * Not U isted-pending completion of test. 3-3 ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01

24 Conductor Insulation Strip engths (Min.) 15/16 15/ /16 1-1/8 1-1/8 1-3/16 CONVENTIONA COMPRESSION DIE TOOING (Crimps per Connection) ANDERSON VERSA-CRIMP COMPRESSION TOOS (Crimps per Connection) Thomas & Betts (Crimps) Kearney (Crimps) Burndy ongitudinal Indent (Crimps) 1-3/16 Burndy (Crimps) Hyd. s 1, 15 0 & 0 Ton s TBM5 TBM8 s WH s O s Y35 Y39 Y5 Y86RB Indentor Y8PR 1-1/ Y8B Indentor Y8PR YB Indentor YPR Y3B Indentor Y3PR Y3A Indentor Y3PR MY9-3 VERSA-CRIMP s (Number of Crimps) Copper Wire Size AWG Nest Setting Nest Nest Nest Nest Nest Die Die Die Die Die Die Color Code 1-5/16 or MCM STR VC8 A NIBS VC7 FT FT VC7-350 * -500 V-C s Wire Range AWG or MCM Stranded (Copper Only) Catalog Number VHSS VHCS Blue U5CRT B6CD 1-1/ A6CD #6-6 #6 1 1 #6 Blue Gray Brown Green Pink Black Orange Purple Yellow +White +Red +Blue 5/16 1-1/ 5/16 UCRT UCRT U1CRT U5RT U6RT U7RT U8RT U9RT U30RT U31RT U3RT BCD BCD B1CD B5D B6D B7D B8D B9D B30D B31D B3D ACD ACD A1CD A5D A6D A7D A8D A9D A30D A31D A3D # # #1 1/0 /0 3/0 / # 1 1 # Gray 3/8 3/8 - #6-# # Brown 1-3/ -1 #6-# #1 Green H 1/ 1/ E5D 1-3/ -1/0 #6-1/ /0 Pink 5 9/16 9/16 5/8-1 11/ /16 9/16 5/8-1 11/ E6D E7D E8D E9D E30D E31D E3D -/0 #-/ /0 Black /0 Orange -1/8 VHSS & VHCS -3/0 #-3/0 F8D C8D /0 Purple -/0 #1-/ F9D F30D F31D F3D C9D C30D C31D C3D 50 Yellow -50 1/ H 66 71H 71 76H White -300 / Red / Blue 3-00 / H 87 +Brown 1 or 1- ( ) U3RT F3D C3D E3D No Die Required A3D Brown -500 / H 9 U36RT F36D C36D E36D Green 106H 106 F39D F0D C39D C0D E39D E0D 750 Black H H 15 FD CD No Die Required F6D C6D TBM-8 ONY Burndy Y5 head requires an adapter for use with U series dies. Users of and VC7 tools must strip off an extra 1-5/8 of insulation from one end of cable to permit removal of tool over conductor sizes 50 MCM and larger on VHSS sleeves. VC8 tool crimps 500 MCM ONY. VC8 tool crimps MCM ONY. * Not U isted-pending completion of test. APRI 01 ANDERSON HUBBE POWER SYSTEMS FARGO

25 CONVENTIONA COMPRESSION DIE TOOING (Crimps per Connection) ANDERSON VERSA-CRIMP COMPRESSION TOOS (Crimps per Connection) Thomas & Betts (Crimps) Conductor Insulation Strip engths (Min.) Kearney (Crimps) Burndy ongitudinal Indent (Crimps) 1-1/ Burndy (Crimps) 1-1/ Hyd. s 1, 15 0 & 0 Ton 1-3/8 s TBM5 TBM8 s WH s O s Y35 Y39 Y5 Y86RB Indentor Y8PR Y8B Indentor Y8PR YB Indentor YPR Y3B Indentor Y3PR Y3A Indentor Y3PR MY9-3 VERSA-CRIMP s (Number of Crimps) Copper Wire Size AWG Nest Setting Nest Nest Nest Nest Nest Die Die Die Die Die Die Color Code or MCM STR 1-1/ VC8 A NIBS VC7 FT FT VC7-350 * / V-C s Wire Range AWG or MCM Stranded (Copper Only) Catalog Number VHS VHC Blue U5CRT B6CD A6CD 1-5/8 #6-6 #6 #6 Blue 1-5/ Gray Brown Green Pink Black Orange Purple Yellow +White () +Red () +Blue () 5/16 5/16 UCRT UCRT U1CRT U5RT U6RT U7RT U8RT U9RT U30RT U31RT U3RT BCD BCD B1CD B5D B6D B7D B8D B9D B30D B31D B3D ACD ACD A1CD A5D A6D A7D A8D A9D A30D A31D A3D # # #1 1/0 /0 3/0 / / - # # Gray 3/8 3/8 # Brown 1-3/ VHS & VHC - #6-# -1/8-1 #6-#1 3 3 #1 Green H 1/ -1/8 1/ E5D -1/ -1/0 #6-1/ /0 Pink 5 9/16 9/16 5/8-1 11/ /16 9/16 5/8-1 11/ E6D E7D E8D E9D E30D E31D E3D -3/8 -/0 #-/0 3 3 /0 Black /0 #-3/ /0 Orange F8D C8D -13/16 -/0 #1-/0 3 3 /0 Purple F9D F30D F31D F3D C9D C30D C31D C3D -50 1/ Yellow 66H() 66 71H() 71 76H() / White 3-1/ / Red -00 / Blue 87H() 87 +Brown () 1 or 1- U3RT () F3D C3D E3D 3-1/8 No Die Required A3D 500 Brown -500 / H() 9 U36RT F36D C36D E36D Green 106H() 106 F39D F0D C39D C0D E39D E0D Black H() H() 15 FD CD No Die Required F6D C6D / TBM-8 ONY Burndy Y5 head requires an adapter for use with U series dies. Users of and VC7 tools must strip off an extra 1-5/8 of insulation from one end of cable to permit removal of tool over conductor sizes 50 MCM and larger on VHS sleeves. VC8 tool crimps 500 MCM ONY. VC8 tool crimps MCM ONY. * Not U isted-pending completion of test. 5-5 ANDERSON HUBBE POWER SYSTEMS FARGO APRI 01