ALU-POWER ALU-POWER FRÄSER CARBIDE. - Aluminium Alloys and Silent Cutting. - Für Aluminiumlegierungen in schwerem und ruhigem Schnitt
|
|
|
- Melvyn Watson
- 6 years ago
- Views:
Transcription
1 Being the best through innovation FÄSE - Aluminium s and Silent Cutting - Für Aluminiumlegierungen in schwerem und ruhigem Schnitt
2 SELECTION GUIE ITEM MOEL ESCIPTION SIZE PAGE MIN MAX EG93 E5522 E5521, 2 FLUTE 25 HELIX CONE AIUS TiCN COATE VOLLHATMETALL, 2 SCHNEIEN 25 ECHTSSPIALE ECKENAIUS TiCN-BESCHICHTET, 2 FLUTE 45 HELIX VOLLHATMETALL, 2 SCHNEIEN 45 ECHTSSPIALE EG99, 2 FLUTE CONE AIUS TiCN COATE VOLLHATMETALL, 2 SCHNEIEN ECKENAIUS TiCN-BESCHICHTET EG91, 2 FLUTE 5 HELIX BALL NOSE TiCN COATE VOLLHATMETALL, 2 SCHNEIEN 5 ECHTSSPIALE STINAIUS TiCN-BESCHICHTET EG9 EP922 EP923 EP924 EP925, 3 FLUTE 4 HELIX BALL NOSE TiCN COATE VOLLHATMETALL, 3 SCHNEIEN 4 ECHTSSPIALE STINAIUS TiCN-BESCHICHTET PEMIUM -PM, 3 FLUTE 42 HELIX SHOT LENGTH OUGHING TiAlN COATE PEMIUM -PM, 3 SCHNEIEN 42 ECHTSSPIALE KUZ SCHUPPFÄSE TiAlN-BESCHICHTET PEMIUM -PM, 3 FLUTE 42 HELIX LONG LENGTH OUGHING TiAlN COATE PEMIUM -PM, 3 SCHNEIEN 42 ECHTSSPIALE LANG SCHUPPFÄSE TiAlN-BESCHICHTET ECOMMENE CUTTING CONITIONS EMPFOHLENE SCHNEIKONITIONEN phone: , fax: , yg1@yg1.kr
3 : Excellent, : Good Hardened ~HB225 HB225~325 Hc3~4 Hc4~45 Hc45~55 Hc55~7 phone: , fax: , yg1@yg1.kr 725
4 EG93 SEIES GLATTE ZYLINESCHAFT, 2 FLUTE 25 HELIX CONE AIUS TiCN COATE VOLLHATMETALL, 2 SCHNEIEN 25 ECHTSSPIALE ECKENAIUS TiCN-BESCHICHTET esigned for the machining aluminum and its alloys, non-ferrous materials. Increased tool life and higher cutting accuracy. Maximum-stock removal, chip ejection, stability. Corner adius for avoiding the chipping. Geeignet zum Fräsen von Aluminium, Aluminiunlegierungen und NE-Metallen. Höhere standzeit und höhere Schneidgenauigkeit. Sehr gute Spanabfuhr. Eckenradius zur Vermeidung von Abbröckelungen. X57 1 P.733 EP No. PLAIN Corner adius Mill 1 Shank of Cut Below Shank Overall Unit : mm Neck EG932 EG933 EG934 EG935 EG93 EG93 EG931 EG93 EG931 EG K-2 Mill ia. Tolerance(mm) ~-.3 Shank ia. Tolerance h ~HB225 HB225~325 Hc3~4 Hardened Hc4~45 Hc45~55 Hc55~7 : Excellent : Good 72 phone: , fax: , yg1@yg1.kr
5 E5522 SEIES E5521 SEIES GLATTE ZYLINESCHAFT FLAT SHANK SEITLICHE MITNAHMEFLÄCHEN, 2 FLUTE 45 HELIX VOLLHATMETALL, 2 SCHNEIEN 45 ECHTSSPIALE Suitable for high speed machining in aluminum and other nonferrous materials, excellent surface finishes, superior chip removal. Zur HSC- Bearbeitung von Aluminium und anderen Nichteisenmetallen. X57 P.734 PLAIN EP No. FLAT Mill Shank of Cut Overall Unit : mm E55223 E55224 E55225 E5522 E5522 E55221 E5522 E E55221 E55221 E55222 E55213 E55214 E55215 E5521 E5521 E55211 E5521 E E55211 E55211 E552 TiN, TiCN - coating & TiAIN - coating is available on your request High performance in machining aluminum and non-ferrous materials Special designed geometry with high rigidity cutting edge Improved surface roughness - cylindrical margin which is controlled tightly. Excellent chip removal - higher rake angle, higher helix angle(45 ), bigger chip pocket. K-2 Corner radius, Corner chamfer, Neck design is available on your request. TiN, TiCN & TiAlN coating is available on your request. FLAT SHANK UNCOATE E5522 E5521 TiN E522 E521 TiCN EG522 EG521 TiAlN EH522 EH521 CHIP POCKET CYLINICAL MAGIN ECCENTIC PIMAY ELIEF Mill ia. Tolerance(mm) Shank ia. Tolerance ~-.3 h ~HB225 HB225~325 Hc3~4 Hardened Hc4~45 Hc45~55 Hc55~7 : Excellent : Good phone: , fax: , yg1@yg1.kr 727
6 EG99 SEIES GLATTE ZYLINESCHAFT, 2 FLUTE CONE AIUS TiCN COATE VOLLHATMETALL, 2 SCHNEIEN ECKENAIUS TiCN-BESCHICHTET Excellent cutting qualities on stainless steel, Aluminum, copper. Increased tool life and higher cutting accuracy. Zur Bearbeitung von Aluminium und anderen Nichteisenmetallen sowie rostfreien Stählen. Höhere standzeit und höhere Schneidgenauigkeit. X57 P.735 EP No. PLAIN Corner adius Mill Shank Below Shank of Cut Overall Unit : mm Neck EG994 EG99 EG99 EG991 EG99 EG991 EG Mill ia. Tolerance(mm) Shank ia. Tolerance ~-.3 h K-2 ~HB225 HB225~325 Hc3~4 Hardened Hc4~45 Hc45~55 Hc55~7 : Excellent : Good 72 phone: , fax: , yg1@yg1.kr
7 EG91 SEIES GLATTE ZYLINESCHAFT, 2 FLUTE 5 HELIX BALL NOSE TiCN COATE VOLLHATMETALL, 2 SCHNEIEN 5 ECHTSSPIALE STINAIUS TiCN-BESCHICHTET Excellent cutting qualities on stainless steel, Aluminum, copper. Increased tool life and higher cutting accuracy. Zur Bearbeitung von Aluminium und anderen Nichteisenmetallen sowie rostfreien Stählen. Höhere standzeit und höhere Schneidgenauigkeit. X57 1 P.735 EP No. PLAIN adius of Ball Nose (±.1) Mill 1 Shank of Cut Below Shank Overall Unit : mm Neck EG91 EG91 EG911 EG91 EG911 EG Mill ia. Tolerance(mm) ±.2 Shank ia. Tolerance h K-2 ~HB225 HB225~325 Hc3~4 Hardened Hc4~45 Hc45~55 Hc55~7 : Excellent : Good phone: , fax: , yg1@yg1.kr 729
8 EG9 SEIES GLATTE ZYLINESCHAFT, 3 FLUTE 4 HELIX BALL NOSE TiCN COATE VOLLHATMETALL, 3 SCHNEIEN 4 ECHTSSPIALE STINAIUS TiCN-BESCHICHTET Excellent cutting qualities on stainless steel, Aluminum, copper. Increased tool life and higher cutting accuracy. Zur Bearbeitung von Aluminium und anderen Nichteisenmetallen sowie rostfreien Stählen. Höhere standzeit und höhere Schneidgenauigkeit. X57 1 P.73 EP No. PLAIN adius of Ball Nose (±.1) Mill 1 Shank of Cut Below Shank Overall Unit : mm Neck EG92 EG925 EG93 EG935 EG94 EG95 EG9 EG9 EG91 EG9 EG K-2 Mill ia. Tolerance(mm) Shank ia. Tolerance ~-.3 h ~HB225 HB225~325 Hc3~4 Hardened Hc4~45 Hc45~55 Hc55~7 : Excellent : Good 73 phone: , fax: , yg1@yg1.kr
9 EP922 SEIES EP923 SEIES GLATTE ZYLINESCHAFT FLAT SHANK SEITLICHE MITNAHMEFLÄCHEN PEMIUM -PM, 3 FLUTE 42 HELIX OUGHING SHOT LENGTH TiAlN COATE PEMIUM -PM, 3 SCHNEIEN 42 ECHTSSPIALE SCHUPPFÄSE KUZ TiAlN-BESCHICHTET Maximum stock removal rates at High Speed Condition. educes vibrations and improves surface roughness. Sehr gute Spanabfuhr auch bei Hochgeschwindigkeitsfräsen. eduziert Vibrieren und verbessert Oberflächenrauheit. X57 P.73 PLAIN EP No. FLAT Mill js Shank h of Cut Overall Unit : mm EP922 EP92214 EP9221 EP9221 EP9222 EP92222 EP92225 EP9222 EP92232 EP923 EP92314 EP9231 EP9231 EP9232 EP92322 EP92325 EP9232 EP92332 Tolerances according to IN 71 & 711 Toleranzen nach IN 71 & 711 js h from 1 to 3 von 1 bis 3 Tolerance range in μm / Toleranzwerte in μm Nominal- in mm / Nennmaßbereich in mm over 3 to über 3 bis over to 1 über bis 1 over 1 to 1 über 1 bis 1 over 1 to 3 über 1 bis over 3 to 5 über 3 bis 5 ± 5 ± ± 75 ± 9 ± 15 ± K-2 ~HB225 HB225~325 Hc3~4 Hardened Hc4~45 Hc45~55 Hc55~7 : Excellent : Good phone: , fax: , yg1@yg1.kr 731
10 EP924 SEIES EP925 SEIES GLATTE ZYLINESCHAFT FLAT SHANK SEITLICHE MITNAHMEFLÄCHEN PEMIUM -PM, 3 FLUTE 42 HELIX OUGHING LONG LENGTH TiAlN COATE PEMIUM -PM, 3 SCHNEIEN 42 ECHTSSPIALE SCHUPPFÄSE LANG TiAlN-BESCHICHTET Maximum stock removal rates at High Speed Condition. educes vibrations and improves surface roughness. Sehr gute Spanabfuhr auch bei Hochgeschwindigkeitfräsen. eduziert Vibrieren und verbessert Oberflächenrauheit. X57 P.73 PLAIN EP No. FLAT Mill js Shank h of Cut Overall K-2 EP924 EP92414 EP9241 EP9241 EP9242 EP92422 EP92425 EP9242 EP92432 EP925 EP92514 EP9251 EP9251 EP9252 EP92522 EP92525 EP9252 EP92532 Tolerances according to IN 71 & 711 Toleranzen nach IN 71 & 711 js h from 1 to 3 von 1 bis 3 Tolerance range in μm / Toleranzwerte in μm Nominal- in mm / Nennmaßbereich in mm over 3 to über 3 bis over to 1 über bis 1 over 1 to 1 über 1 bis 1 over 1 to 3 über 1 bis over 3 to 5 über 3 bis 5 ± 5 ± ± 75 ± 9 ± 15 ± ~HB225 HB225~325 Hc3~4 Hardened Hc4~45 Hc45~55 Hc55~7 : Excellent : Good 732 phone: , fax: , yg1@yg1.kr
11 ECOMMENE CUTTING CONITIONS EMPFOHLENE SCHNEIKONITIONEN, 2 FLUTE 25 HELIX CONE AIUS TiCN COATE VOLLHATMETALL, 2 SCHNEIEN 25 ECHTSSPIALE ECKENAIUS TiCN-BESCHICHTET EG93 SEIES MATEIAL ALUMINUM LOW SILICON ALUMINUM IAMETE X A A : Ø3 ~Ø1 =.25 Ø ~ Ø2 =.5 = rev./min. = mm/min. K-2 phone: , fax: , yg1@yg1.kr 733
12 ECOMMENE CUTTING CONITIONS EMPFOHLENE SCHNEIKONITIONEN, 2 FLUTE 45 HELIX VOLLHATMETALL, 2 SCHNEIEN 45 ECHTSSPIALE E5522, E5521 SEIES MATEIAL ALUMINUM LOW SILICON ALUMINUM X57 IAMETE A A : Ø3 ~Ø1 =.25 Ø ~ Ø2 =.5 = rev./min. = mm/min. K-2, 2 FLUTE 45 HELIX TiCN COATE VOLLHATMETALL, 2 SCHNEIEN 45 ECHTSSPIALE TICN-BESCHICHTET EG522, EG521 SEIES MATEIAL IAMETE ALUMINUM LOW SILICON ALUMINUM A A : Ø3 ~Ø1 =.25 Ø ~ Ø2 =.5 = rev./min. = mm/min. 734 phone: , fax: , yg1@yg1.kr
13 ECOMMENE CUTTING CONITIONS EMPFOHLENE SCHNEIKONITIONEN, 2 FLUTE CONE AIUS TiCN COATE VOLLHATMETALL, 2 SCHNEIEN ECKENAIUS TiCN-BESCHICHTET EG99 SEIES MATEIAL ALUMINUM ALUMINUM ALLOY COPPE ALLOY IAMETE X57.5 A A : ~Ø1=.25 Ø~Ø2=.5.5 A A : ~Ø1=.25 Ø~Ø2=.5 = rev./min. = mm/min., 2 FLUTE 5 HELIX BALL NOSE TiCN COATE VOLLHATMETALL, 2 SCHNEIEN 5 ECHTSSPIALE STINAIUS TiCN-BESCHICHTET EG91 SEIES K-2 MATEIAL IAMETE ALUMINUM ALUMINUM ALLOY ap=.2 ae=.5 ap ae COPPE ALLOY = rev./min. = mm/min. phone: , fax: , yg1@yg1.kr 735
14 ECOMMENE CUTTING CONITIONS EMPFOHLENE SCHNEIKONITIONEN, 3 FLUTE 4 HELIX BALL NOSE TiCN COATE VOLLHATMETALL, 3 SCHNEIEN 4 ECHTSSPIALE STINAIUS TiCN-BESCHICHTET EG9 SEIES MATEIAL ALUMINUM LOW SILICON ALUMINUM COPPE ALLOY X57 IAMETE ap=.2 ae=.5 ap ae = rev./min. = mm/min. K-2 PEMIUM -PM, 3 FLUTE 42 HELIX OUGHING TiAlN COATE PEMIUM -PM, 3 SCHNEIEN 42 ECHTSSPIALE SCHUPPFÄSE TiAlN-BESCHICHTET EP922, EP923, EP924, EP925 SEIES MATEIAL IAMETE ALUMINUM ALUMINUM ALLOY = rev./min. = mm/min. 73 phone: , fax: , yg1@yg1.kr
D-POWER CFRP D-POWER CFK CARBIDE. Being the best through innovation. - For composite materials including CFRP, GFRP
Being the best through innovation CFK - For composite materials including, GFP - Für Verbund Materialien einschl. CFK und GFK SELECTION GUIDE SIZE ITEM MODEL DESCIPTION PAGE MIN MAX GUF40 CABIDE, MULTI
Ball Corner Radius YE-EI10 INSERTS & STEEL / CARBIDE HOLDERS INSERTS & STEEL / CARBIDE HOLDERS
YE-EI10 Ball Corner Radius Ball Corner Radius INSERTS & STEEL / CARBIDE HOLDERS HEAD OFFICE 68, Cheongcheon-Dong, Bupyeong-Gu, Incheon 4-0, KOREA PHONE :+82--526-09, FAX:+82--526-4373 Http://www.yg1.kr
HIGH PERFORMANCE PRODUCT
HIGH PERFORMANCE PRODUCT SYNCHRO TAPS (HSS-PM) High Speed, High Precision for CNC Machining Synchro Tap has an optimized short thread length and high thread reliefs. We guarantee you shorter cycle time,
YE-VP16 HIGH PERFORMANCE CARBIDE END MILLS FOR STEEL, CAST IRON, STAINLESS STEEL. - 4 Flute Ball Nose - 6 Flute square & CorNer radius SERIES
YE-VP6 HIGH PERFORMANCE CARBIDE END MILLS FOR STEEL, CAST IRON, STAINLESS STEEL SERIES - 4 Flute Ball Nose - 6 Flute square & CorNer radius Leading Through Innovation The for Stainless Steels, Mild Steels,
4JER 4JER. For superalloy machining. High efficiency and stable machining for heat resistant alloys such as Inconel.
Solid end mill For superalloy machining High efficiency and stable machining for heat resistant alloys such as Inconel Resistant to breakage and capable of stable slotting and trochoidal machining Long
4JER 4JER. For Superalloy Machining. High Efficiency and Stable Machining for Heat Resistant Alloys such as Inconel.
Solid End Mill For Superalloy Machining High Efficiency and Stable Machining for Heat Resistant Alloys such as Inconel Resistant to Breakage and Capable of Stable and Trochoidal Machining Long Tool Life
END MILLS ROUGHING DRILLING RAMPING SLOTTING FINISHING. Now with corner radius!
END MILLS Now with corner radius! ROUGHING DRILLING RAMPING SLOTTING FINISHING Shank HA/HB Solid carbide 4-fluted 36 /38 helix Face geometry for drilling and ramping nano-si -coating Cutting edge preparation
CATALOGUE MILLS & DRILLS 2017 CARBIDE END MILLS 2 TEETH OR201, OR202 3 CARBIDE END MILLS 3 TEETH OR301 4 CARBIDE END MILLS 4 TEETH OR401, OR402 5
Mills Drills CATALOGUE MILLS & DRILLS 2017 CONTENTS CARBIDE END MILLS 2 TEETH OR201, OR202 3 CARBIDE END MILLS 3 TEETH OR301 4 CARBIDE END MILLS 4 TEETH OR401, OR402 5 CARBIDE END MILLS 4 TEETH WITH DOUBLE
Carbide Tip Coolant Fed Drills
KOOLTWIST, KOOLCARB, KOOLDEX Carbide Tip Coolant Fed Drills KOOLTWIST HIGH PERFORMANCE High performance, helical point, stub length. For alloy steels, tool steels, free machining stainless steels, Style
Mirus Square End Mills for Ultra-High Efficiency Roughing and Semi-Finishing FEATURES
Square End Mills for Ultra-High Efficiency Roughing and Semi-Finishing FEATURES New TH Coating for long tool life in both dry and wet machining Double gash guarantees high performance in both vertical
SERIES
eep Hole rills Spiral flute drilling from 15x to 40x CNC style solid carbide gun drills Miniature CNC style gun drills Classic gun drills with brazed head RT 100 T High penetration rate EB 100 CNC style
DHC. Differential Helix Cutter
DHC Differential Helix Cutter Universal Short and Long End Mills for the Highest Productivity in Roughing and Finishing Applications (Standard & with Corner Radius) 2 x d 1 x d DHC (Differential Helix
High-Performance Solid Carbide End Mills Hard Materials
High-Performance Solid Carbide Hard Materials..................................A39 A50 Series 7S05 Lists 7S05 7S15 7S25 Vision Plus..........................A40 Series 7S5F Vision Plus...........................A41
TAKE IT ON WITH TITANOX
YU-TP8 BEST VALUE IN THE WORLD OF CUTTING TOOLS FOR TITANIUM, STAINLESS STEEL AND ALLOY STEELS : TOUGH MATERIALS? TAKE IT ON WITH TITANOX INDUSTRY-LEADING SOLID CARBIDE END MILLS HIGH-PERFORMANCE MACHINING
HSS. Being the best through innovation GOLD-P DRILLS - GOLD-P COATING, HSS & 8% COBALT
Being the best through innovation - COATING, & 8% COBALT SELECTION GUIDE ITEM MODEL DESCRIPTION SIZE MIN MAX PAGE GP, COATED.0 3.0 1 D2GP191 Co8, COATED.0 3.0 144 DRILL SETS 1.0mm ~ 10.0mm 0.5mm STEP SET1(19PCS)
YU-VP17 YE- EI18 COATED EXCHANGEABLE CARBIDE INSERTS WITH CARBIDE & STEEL HOLDERS FOR VARIOUS MATERIALS
YU-VP17 YE- EI18 europe COATED EXCHANGEABLE CARBIDE INSERTS WITH CARBIDE & STEEL HOLDERS FOR VARIOUS For General Purpose, Pre-Hardened Steels, High-Hardened Steels, Stainless Steels and Graphite High Precision
CARBIDE. Being the best through innovation NC-SPOTTING DRILLS NC-ANBOHRER. - CENTERING and CHAMFERING. - Zentrier & Abfasen
Being the best through innovation NC-ANBOHRER - ING and CHAMFERING - Zentrier & Abfasen SELECTION GUIDE SOLID CARBIDE For General materials, Cast steels, Cast iron, Non-ferrous materials SIZE ITEM MODEL
REAMER REAMER CARBIDE / HSS YE-RM13 CARBIDE / HSS
REAMER CARBIDE / HSS YERM HEAD OFFICE, CheongcheonDong, BupyeongGu, Incheon, Korea PHONE :+00, FAX:+7 http://www.yg.kr Email:yg@yg.kr Tool specifications are subject to change without notice. REAMER CARBIDE
Countersinks. Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute
Countersinks Countersinks Smooth cutting, perfect chamfering - Counterbores - Cross Hole - Single Flute - Three Flute smooth cutting perfect chamfering countersinks Product Code: C108 This new generation
Countersink Section 2018 Master Catalog
Countersink Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance
May SAMURAI Series. 4 Flutes Square 4 Flutes Corner Radius 2,3 & 4 Flutes Ball. 59 Models Ø1 - Ø12mm
May 2017 SAMURAI Series 4 Flutes Square 4 Flutes Corner Radius 2,3 & 4 Flutes Ball 59 s Ø1 - Ø12mm SAMURAI GS - 4 Flutes Square ( Ø 1 Ø 10 ) d2 d1 l2 l1 Suitable for the machining of : Carbon Stainless
General Purpose Drill Section 2018 Master Catalog
General urpose Drill Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance
SLOTTING ROUGHING DRILLING & RAMPING
SLOTTING ROUGHING DRILLING & RAMPING Shank HA/HB Solid carbide 4-fluted 36 /38 helix Face geometry for drilling and ramping nano-si -coating Cutting edge preparation Optimal chip space SLOTTING High process
CARBIDE. Being the best through innovation NC-SPOTTING DRILLS. - CENTERING and CHAMFERING
Being the best through innovation - CENTERING and CHAMFERING SELECTION GUIDE ITEM MODEL DESCRIPTION SIZE MIN MAX PAGE D5306 D5307, D D 1 D5315 D5318, D3.0 D 111 RECOMMENDED CUTTING CONDITIONS 112 8 phone:+82-32-526-09,
The most demanding Industries Applications Materials demand DATA FLUTE. Shouldn t you?
The most demanding Industries Applications Materials demand DATA FLUTE. Shouldn t you? American Made American Owned A LITTLE HISTORY Data Flute s heritage stretches back to its humble beginnings as a specialty
YE-SY16. Coated HSS-PM (Powder Metallurgy) Taps for High-Speed Tapping on Rigid CNC Machine
YE-SY16 Coated HSS-PM (Powder Metallurgy) Taps for High-Speed Tapping on Rigid CNC Machine FEATURES OF GEOMETRY Shorter thread length will reduce chip trouble at higher speed tapping conditions Tolerance
Jongen UNI-MILL VHC milling cutter
Jongen Werkzeugtechnik Jongen UNI-MILL VHC milling cutter Trochoidal milling at the highest level Jongen UNI-MILL VHC milling cutter Static and dynamic "trochoidal milling" is a combination of circular
Carbide Modular Shrink System
Carbide Modular Shrink System Insert Shrink Fit HEA Shrink Fit SHANK Type Code Tool imensions imensions Ø1 Tool Ø1 VB, VRBS CHTAV-0250-0.460 1.700 0.879 CHTAV-0312-0.460 1.700 0.827 TO, HF, FB, BS, MB,MBT,
Deep Hole Drills. RT 100 T coolant fed, solid carbide twist drills EB 100 solid carbide gun drills EB 80 Conventional brazed head gun drills
eep Hole rills RT 100 T coolant fed, solid carbide twist drills EB 100 solid carbide gun drills EB 80 Conventional brazed head gun drills RT 100 T High penetration rate carbide twist drill EB 100 Solid
High Performance Varibale Index End Mills for Difficult to Machine Materials HY-PRO CARB VGX. Vol 7
High Performance Varibale Index End Mills for Difficult to Machine Materials HY-PRO CARB VGX Vol 7 Technical Data Chatter free, high performance machining! The HY-PRO CARB VGx End Mill Series from OSG
Solid End Milling. Solid End Milling Introduction... K2 K17. High-Performance Solid Carbide End Mills... L1 L150
Solid End Milling Solid End Milling Introduction... K2 K17... L1 L150 General Purpose Solid Carbide End Mills... M1 M43 K1 Solid Carbide End Mills How to Choose the Correct End Mill End Mills Z = number
Special Tool Configurations
Special Tool Configurations Special Overall and/or Flute Lengths While we recoend using a standard overall and flute length whenever possible, there are situations where the use of special overall and/or
Range of products. Ern st Reime The tradition continues!
PI 0902 Range of products Ern st Reime The tradition continues! escription of the symbols Cutting geometry Thread form S 30 S = Helix angle 2x Through hole Blind hole Thread depth 2x Shank design Plain
Kennametal Inc Technology Way Latrobe, PA USA. Tel: (United States and Canada)
C WORLD HEADQUARTERS Kennametal Inc. 1600 Technology Way Latrobe, PA 15650 USA Tel: 800.446.7738 (United States and Canada) E-mail: ftmill.service@kennametal.com EUROPEAN HEADQUARTERS Kennametal Europe
Solid Carbide Taps.
Solid Carbide Taps www.vergnano.com VERGNANO CARBIDE TAPS The use of carbide tools has increased significantly in the last few years. Nowadays turning, drilling and milling operations are done, for the
Your Cutting Tool Solution for DRILLS
Your Cutting Tool Solution for DRILLS DRILLS / VISUAL INDEX AQUA DRILL EX STUB LENGTH AQ EX List 9600 List 9601 h8 15 0 h6 Metric s Fractional s Specs/s Speeds/s P22, 2 P2 AQUA DRILL EX JOBBER LENGTH AQ
Cutting Speed Vc [M/min] Hardness
![Cutting Speed Vc [M/min] Hardness](/thumbs/94/119491657.jpg "Cutting Speed Vc [M/min] Hardness")
HPD METRIC Non-alloyed steels, 1213, 13L13, 12, Cast steels Free-machining steels 12L14,1118 etc Low-alloyed steels, Cast steels(
AQDEXOH10D, 15D, 20D, 25D, 30D, 40D, PLT AQMD
New USA Stock Items AQUA DRI EX CARBIDE DRI SERIES Aqua EX 2D, 4D Aqua EX Oil Hole 3D, D, D Aqua EX Deep Hole D, 1D, 20D, 2D, 30D, 40D Aqua EX Oil Hole Pilot Aqua EX Oil Hole Three Flute 3D, D Aqua Micro
4 Flutes UTCOAT. Size φ1~φ20 CZS
UTCOAT Size φ1~φ20 CZS Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SUS Prehardened Steels NAK HPM Hardened Steels Cast Iron Aluminum
4 Flute All Purpose. duramill.com. for steels, stainless steels and high-temp alloys. roughing, slotting, pocketing & ramping applications
4 Flute All Purpose for steels, stainless steels and high-temp alloys roughing, slotting, pocketing & ramping applications duramill.com 2 4 Flute AP The new WhisperKut GEN2 4 Flute AP has been engineered
Jongen Werkzeugtechnik. Working depth. Drilling by JONGEN. 3 x D. BP 04 to 12
Jongen Werkzeugtechnik Working depth 3 x D Drilling by JONGEN BP 04 to 12 THE TOOL New at Jongen: universally applicable high-performance drill for use on lathes and milling centers. It offers the highest
SGS: Experts in Mold & Die.
SGS: Experts in Mold & Die. SGS has the tools you need when it comes to high efficiency, high accuracy machining of hardened mold & die materials. Mold & die work requires tools that can handle difficult
INDEX. Drills. High Speed Steel 1/2" Round Shank S & D, 118 Point, Surface Treated Drill Sets
D R I L L S 2 0 0 1 NOTES INDEX PRODUCT STYLE NO. PAGE STYLE NO. PAGE JOBBERS LENGTH, GENERAL PURPOSE High Speed Steel Fractional Sizes, 118 Point, Surface Treated................1600.....1 Fractional
Made in Germany. SELECTION Milling 2017 valid until Economical Tools for Milling
Made in Germany SELECTIO Milling 2017 valid unti8.02.2018 Economical Tools for Milling EMUGE-FRAKE Industry Solutions Economical high performance cutting tools for the demanding industries of today and
Feature of Flute Design
Feature of Flute Design Recommended on a wide range of soft materials Raw materials and Hardened steels up to 55 HRC. Variable Helix design and Positive Rake angle offers stable milling under high speed
GENERAL CARBIDE DRILLS CARBIDE UNIVERSELLE VHM - BOHRER. Being the best through innovation - JOBBER & STUB LENGTH. General Purpose, DIN338 & DIN6539
Being the best through innovation UNIVERSELLE VHM - BOHRER - JOBBER & STUB LENGTH General Purpose, DIN338 & DIN6539 - Kurz & Extra Kurz Für allgemeinen Einsatz, DIN338 und DIN6539 SELECTION GUIDE SOLID
CARBIDE INSERT. Being the best through innovation. Available for General Steels and for Stainless Steels
INSERT Being the best through innovation Available for General and for Stainless SELECTION GUIDE ITEM MODEL DESCRIPTION PAGE YA1A / YB1A YA2C / YB2C i / idream Drill General / idream Drill INOX 34 YB1A
POW R PATH enduro STREAKERS POW R FEED OMEGA-6 INCONEX
Power. Precision. Performance. POW R PATH enduro STREAKERS POW R FEED OMEGA-6 INCONEX M E T A L M O R P H O S I S THE NEW FRONTIER OF ADVANCED END MILLS M E T A L M O R P H O S I S THE NEW FRONTIER OF
Keeping the Customer First. Tungaloy Catalogue TE0707-E2. Cutting Tools.
Keeping the Customer First Tungaloy Catalogue TE0707-E2 2007 Cutting Tools www.tungaloy-eu.com Selection Guides List of... 410 Selection Guides... 412 Specifications Solid Carbide s For High Speed Deep
ALU-POWER HPC DREAM DRILLS TANK-POWER V7 PLUS A MINICUT TITANOX YU-AS19. Helping Aerospace Manufacturers Reach New Heights in Productivity
YU-AS19 BEST VALUE IN THE WORLD OF CUTTING TOOLS A E R O S P A C E S O L U T I O N S Helping Aerospace Manufacturers Reach New Heights in Productivity HIGH-PERFORMANCE TOOLS for Milling, Holemaking and
UTTING TOOLS. Stellram Cutting Tools NEW HIGH FEED 7793VX012 DOUBLE SIDED INSERT MILLING CUTTER SYSTEM
UTTING TOOLS Stellram Cutting Tools NEW HIGH FEED 7793VX012 DOUBLE SIDED INSERT MILLING CUTTER SYSTEM 7793 VXO12 Features & Benefits Silver satin plated surface & Improved heat treatment Improved body
Carbide Modular Shrink System
Carbide Modular Shrink System Millstar s Carbide Modular Shrink System offers versatility, strength and accuracy. The carbide shank offers strength and rigidity and the shrink tolerances offer better accuracy
5 flute Trochoidal end mills with variable helix
BASIC LINE+ 5 flute Trochoidal end mills with variable helix The SCT 5 flute Trochoidal end mills combine a few unique characteristics to make them ideally suited for machining different types of steel
RF 100 Speed GUHRING - YOUR WORLD-WIDE PARTNER. High-performance roughing even at deep cutting depths. Smooth operation and high metal removal rate
High-performance roughing even at deep cutting depths Smooth operation and high metal removal rate HPC milling in tough, low-alloyed and high-alloyed steels, and other difficult-to-machine materials GUHRING
The best of both worlds
The best of both worlds CoroMill 210 the ultimate roughing cutter for modern machining techniques Use CoroMill 210 for plunge milling to mill away large volumes of metal or for high feed milling of flat
Finishing cutter Multicut XF Surface Master new!
passion for precision Finishing cutter Multicut XF Surface Master new! Multicut XF EXtreme Finishing [ 2 ] The new Multicut XF can be applied in circumstances with very stringent requirements with regard
THREAD MILLS THREAD MILLS YE-TM14. Higher cutting speeds and feeds than tapping. One tool for blind holes and through holes.
thread mill(1..1) 1.2.17 2:1 A ` 2 Yun OI_CYK T YE-T1 THREA ILLS THREA ILLS Higher cutting speeds and feeds than tapping. One tool for blind holes and through holes. Higher cutting speeds and feeds than
Profile Milling Program Tools
Profile Milling Program Tools Small Ball Nose & Back raft Inserts VRBS 2 imensions R XRN TN HSN escription VRBS-0250 0.250 0.294 0.125 Used for semi and finish-milling small radius or detail work, VRBS-0312
POW R PATH enduro STREAKERS POW R FEED OMEGA-6 INCONEX trucore
Power. Precision. Performance. M E T A L M O R P H O S I S POW R PATH enduro STREAKERS POW R FEED OMEGA-6 INCONEX trucore THE NEW FRONTIER OF ADVANCED END MILLS 1 2 M E T A L M O R P H O S I S THE NEW
RD-SAF Face milling and profiling cutter with positive round inserts
RD-SAF Cutter program, RD 2, RD 6, RD 20 ødm (CM) m l 2 ødm m B ød c ød c Morse taper Arbor mounting D c D 3 Max. dm m l 2 l 3 B F Z Nb of inserts Coolant channels Morse taper RD-2/032-03-CM3-080 20.00
Hydraulic Valve Body. Intelligent tooling solutions cutting your costs
Hydraulic Valve Body Intelligent tooling solutions cutting your costs Benefit from our knowledge Introdution Hydraulic valve bodies in many varieties are one of the most widespread industrial components
SQUARE T4-08 & T4-12
SQUARE T4-08 & T4-12 SQUARE T4-08 & T4-12 DEFINITION Square T4 Definition Definition of Square T4-08/T4-12 Square = Square shoulder cutter T4 = Tangentially mounted inserts with 4 edges/insert 08/12 =
2010 Product Catalog
2010 Product Catalog What s new in this year s catalog? At IMCO, we design and manufacture tools to give you the best performance for your dollar. This year, we extended that approach to our catalog and
/ 2019 full product line
www.tungaloyamerica.com 2018 / 2019 full product line Coated CVD Coated PVD Ceramic Cermet CBN (T-CBN) PCD (T-DIA) Uncoated Cemented Carbide TurnLine Insert External Toolholder Internal Toolholder Miniature
Carbide-tipped or Cermet-tipped Special Designs Ø>20mm up to 76.2mm HR 500 HIGH-PERFORMANCE REAMERS GUHRING - YOUR WORLD-WIDE PARTNER
Carbide-tipped or Cermet-tipped Special Designs Ø>20 up to 76.2 HIGH-PERFORMANCE REAMERS GUHRING - YOUR WORLD-WIDE PARTNER Pictograms Tool material Carbide Carbide-tipped Cermet tipped Internal coolant
passion for precision SpheroCarb diamond-coated ball nose end mill for cutting hard metals
passion for precision SpheroCarb diamond-coated ball nose end mill for cutting hard metals Diamond-coated ball nose end mills for the allround processing of hard metals and technical ceramics [ 2 ] SpheroCarb
SG Powdered Metal Drills
SG Powdered Metal Drills Features of SG-Drill Powder Metal with a TiCN Based Multi-Layered Coating End Mill Shank for High Precision Drilling Features: High Accuracy 3 Rake Relief (SG-ESS) 2 Rake + X-Thinning
Solid Carbide Endmills
A100 Series for Aluminium Alloy Micro grain carbie ro is suitable for general machining. High efficient processing can be achieve by great chip evacuation. High helix angle offers stable an excellent finishe
Tungsten Carbide Rotary Burrs.
Tungsten Carbide Rotary Burrs www.procut.ie Introduction Procut is an internationally renowned brand of high quality carbide burrs, and forms a key part of ATA Group, a privately owned organisation with
2016 New Revision HIGH PERFORMANCE TAPS
2016 New Revision HIGH PERFORMANCE TAPS Greenfield Industries is excited to announce the addition of high performance taps to the Cleveland brand. All taps in the Cleveland line are designed to machine
SUMMARY TECHNICAL INSTRUCTIONS. Technical Information. Geometries and feed rates. Cutting data. Carbide grades for grooving and parting off
SUMMARY TECHNICAL INSTRUCTIONS Technical Information Grooving / Side turning Face grooving Profiling Threading Parting off Page 2-5 6 7 8-9 10-11 Geometries and feed rates Cutting data Inserts type 217
passion for precision Sphero-CVD High-performance milling of carbides with diamond milling tools
passion for precision Sphero- High-performance milling of carbides with diamond milling tools Cost-effective milling of carbides with tools made of pure diamond [ 2 ] Thanks to its great durability, carbide
High Performance Catalog
High Performance Catalog www.sgstool.com As a technological leader, SGS Tool Company is committed to provide you with leading-edge, high-performance products. We address the complexities of High-Speed
WIDIA Slim Line. Distributed by:
WIDIA Slim Line Distributed by: WIDIA Slim Line High-Performance Solid Carbide End Mills VariMill..........................................................................................2 3,8 Roughing...........................................................................................7
SOLID END MILLS CATALOGUE & TECHNICAL GUIDE 2015
SOLID END MILLS CATALOGUE & TECHNICAL GUIDE 2015 Contents General Index...2 Product introduction and technical information...3-19 Universal Product information and cutting data...20-135 P K M N H S TS/P
Technical Information
Technical Information Quality LUKAS carbide burrs are manufactured using high quality types of carbide and modern CNC automatic grinding machines in order to guarantee precision and repeatability of angle,
THREAD MILLS SOLID CARBIDE THREAD MILLS
YE-T18 YU-V17 europe THREAD ILLS SOLID CARBIDE THREAD ILLS Excellent erformance on Various Work Higher Cutting Speeds and Feeds than Tapping One Tool for Blind Holes and Through Holes HEAD OFFICE 211,
Tungsten-carbide burrs
18 Technical Information 19 A suary of available shapes 20 Recoendations for use and cuts 22 Coatings 23 Tungsten-carbide burrs Product line marking The product lines are illustrated by star symbols at
Index. MEGA-Spike-Drill. Product presentation 4 General information 5 Technical specification 5. MEGA-Spike-Drill M9535 6
The tool specialists for the trade. Standard product line MEGA-Spike-Drill The tool specialists for the trade. MILLER GmbH, Präzisionswerkzeuge in Altenstadt is a member of the tool-traders-partner association
PRECISION CUTTING TOOLS,INC
CARBIDE DRILLS CARBIDE ENDMILLS COBALT ENDMILLS PRECISION CUTTING TOOLS,INC POWDER METAL ENDMILLS MACHINING Titanium MACHINING stainless StEEls For many years, Titanium has been the most commonly used
Vol 2. Carbide Flat Drills Designed for Various Applications EXOCARB ADF ADF-2D
Carbide Flat Drills Designed for Various Applications EXOCARB ADF Vol 2 Cutting Data Improved Cutting Edge for reduced cutting forces and smaller chip size. Wide Chip Room for superior chip evacuation.
TOOLS NEWS B055E Update. Multi-functional Indexable Cutter APX3000/4000. A new generation of high performance cutters.
TOOLS NEWS 2014.01 Update B055E Multi-functional Indexable Cutter APX3000/4000 A new generation of high performance cutters. Multi-functional milling Cutter APX3000/4000 Multi functional The APX is highly
ROUGHER/FINISHER ENDMILLS-SOLID CARBIDE
CHUCK JAWS LATHE WORKHOLDING MACHINE VISES RETENTION KNOBS ER, DA, TG COLLETS TOOLHOLDERS INDEXABLE DRILLS TURNING & BORING ENDMILLS, DRILLS TAPS & REAMERS ABRASIVES MEASURING TOOLS MRO & SAFETY FLAT STOCK/DRILL
Milling tools made by JONGEN! C10 FP 124. Face Milling
Milling tools made by JONGEN! Face Milling C10 FP 124 THE TOOL Especially efficient face milling cutter for the roughing and finishing machining Axial depth of cut max. 5 mm, with 8 effective cutting edges
Cost reduction through Performance. SHARK-CUT + SHARK-CUT Rebore. Introducing Shark-Cut Rebore Tools and Inserts for boring
Introducing SharkCut Rebore Tools and Inserts for boring www.arno.de Due to the unique positioning and insert geometry excellent hole quality is achieved also for deeper holes. Easy handling and efficient
Application Products. High Performance Taps Thread Mills Carbide & PM End Mills
2018 Application Products High Performance Taps Thread Mills Carbide & PM End Mills We have made it our mission to invest in the resources, technology, and people that enable us to provide these qualilty
Ferritic/martensitic cast steel. Stainless steel Austenitic
Machining Data for Threading ISO Material Condition Tensile Strength [N/mm ] Hardness HB Material < 0. %C Annealed 0 1 1 No. Non-alloy steel and cast steel, free cutting steel >= 0. %C Annealed 0 190
Price/1. Price/1. Price/1. 1/ 8 3/ 8 1 1/ 2 1/ 8 10g -4580K / 4 3/ 4 2 1/ 2 1/ 4 30g -4660K / / 2 3/ 8 60g -4740K 291.
2 Flute For optimum performance and maximum swarf removal when plunging, slotting and routing in most materials including brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards.
Excellent stability und. ARNO SHORT-Cut -SIS. w w w. a r n o. d e. Introducing SHORT-Cut -SIS for internal groove turning. The new SHORT-Cut holder
Introducing SHORT-Cut -SIS for internal groove turning New w w w. a r n o. d e The new SHORT-Cut holder with optimum insert clamping. Easy handling and efficient in production. ARNO SHORT-Cut -SIS Excellent
HX-NVS: 10 times faster penetration in high-hard steels with HPC and HDC machining
passion passion for precision for precision X-NVS: times faster penetration in high-hard steels with PC and DC machining Rough milling in hard and high-hard materials [ 2 ] You want to machine very hard
SUPER ALLOYS & STAINLESS STEEL ENGINEERED SOLUTIONS
SUPER ALLOYS & STAINLESS STEEL ENGINEERED SOLUTIONS SUPER ALLOYS & STAINLESS STEELS Energy Oil & Gas Automotive Aviation Medical Cutting tools in industries such as aerospace, medical, oil & gas, are being
5315VA Series. Long Edge Milling Cutter
5315VA Series Long Edge Milling Cutter Profiling / Slotting LONG EDGE MILLING CUTTER The 5315VA family is the long edge cutter version of our versatile 7690VA shoulder milling series. This 5315VA series
POWER MILL WITH. Solid Carbide Endmills.
POWER MI WITH Solid Carbide Endmills www.haimer-usa.com CONTENTS Table of Content Page HAIMER Power Mill background information 3 Safe-ock TM pull out protection 4 6 HAIMER Power Mill Characteristics and
NEW EXTENDED PROGRAM AND INTERNAL COOLING
EXTENDED PROGRA AND INTERNAL COOLING Universally applicable for all materials and milling strategies for outstanding performance and tool life Drilling» special face geometry for drilling and ramping»
SG DRILL SERIES POWDERED METAL COBALT DRILLS
SG DRILL SERIES POWDERED METAL COBALT DRILLS Contributing to Progress in the World of Product Manufacture The NACHI Difference ~ NACHI-FUJIKOSHI CORP. is a pioneer of precision cutting tools in Japan and
Jongen Werkzeugtechnik GmbH
STEP MILLING Type B22 Jongen Werkzeugtechnik GmbH Siemensring 11 D-47877 Willich Germany Phone: 0049 2154 9285 2900 Fax: 0049 2154 9285 9 2900 www.jongen.de Email: export@jongen.de THE TOOL Especially
SAWS FOR METAL CUTTING
SAWS FOR METAL CUTTING High Speed Steel Cobalt Carbide TMX Saws A History of European Quality & Craftsmanship The history of TMX saws dates to 1921 Poland with manufacturing of saws for woodworking industry.
passion for precision Sphero-X Finishing and roughing from 40 to 70 HRC
passion for precision Sphero-X Finishing and roughing from 40 to 70 Sphero-X Finishing and roughing from 40 to 70 [ 2 ] Sphero-X denotes the new highperformance class of tool for efficient machining of
TMSD. Thread Mill for Deep Holes INCH
TMSD Thread Mill for Deep Holes INCH 2012 1 TMSD Thread Mill for Deep Holes A multiflute, highproductivity, and economical solution for milling threads in deep holes Weldon Shank Carbide Cylindrical Shank
TOOL NEWS B055A Update. Multi-functional Indexable Cutter APX3000/4000. Holder Expansion. A new generation of high performance cutters.
TOOL NEWS 2015.11 Update Multi-functional Indexable Cutter APX3000/4000 B055A Holder Expansion A new generation of high performance cutters. Multi-functional Indexable Cutter APX3000/4000 Multi functional