High Speed Transmission, 0.8 mm Pitch Connectors for PCB Connections

Size: px

Start display at page:

Download "High Speed Transmission, 0.8 mm Pitch Connectors for PCB Connections"

Joanna Robinson
5 years ago
Views:

3ap 1 Gbps transmission standard. Differential impedance data With a strict time of Tr = 35ps, its contact structure matches 1 Ohm ±1% differential impedance.

1 High Speed Transmission,.8 mm Pitch Connectors for PCB Connections FX18 Series High speed transmission characteristics ICR Insertion-loss-to-Crosstalk-Ratio Enough margin with regulated ICR data of IEEE82.3ap 1 Gbps transmission standard. Differential impedance data With a strict time of Tr = 35ps, its contact structure matches 1 Ohm ±1% differential impedance. Mating variation diagram ICR (db) Features.8 mm pitch Connection type: Coplanar /right angle / parallel (height: 1 to 45 mm) No of pos.: 4, 6, 8, 1, 12, 14 MF (multi-functional) contact The FX18 series utilizes guideposts on both sides of the connector. These guide posts double as multi-functional contacts as well as an aligning structure. 1) Enhanced ground connections between PCB s 2) Capable of being used as power source lines (3 A/line) 3) A sequenced 3-level structure that contains signal contacts Effective mating length of 2 mm (Signal contact) This connector utilizes a 2. mm effective mating length for its signal contacts and provides a sufficient amount of margin for its mating sequence. (MF contact A: 2.5 mm/ MF contact B: 1.5 mm) Resistant to excess mating force The structure is equipped with dip contacts that help prevent damage caused by excessive mating forces and provides stability to both sides of the connector. Simplified mating with large guides Generous lead-in shape simplifies the mating operation. (lead in opening amount: ± 1 mm). The guides also prevent inverse mating. ICR 1 ICR IEEE spec Z (Ohms) Impedance Time (ns) Parallel connection type (3 piece) FX18-**P-.8SV** Coplanar connection type 2.3 Right angle connection type Parallel connection type (2 piece) FX18-**PS-.8H FX18-**P-.8SV** 3545 FX18-**P-.8SH 7.8 FX18-**S-.8SV** FX18-**S-.8SH FX18-**P-.8SV FX18-**S-.8SH FX18-**S-.8SV** In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information

2 Product Specifications Ratings Item Specifications Conditions 1. Contact Resistance Maximum of 9 mø Measured with 1 ma 2. Insulation Resistance Minimum of 1, Mø Measured with DC 25 V 3. Withstanding Voltage No flashover or breakdown Electrifi cation for 1 minutes at AC 3 V 4. Durability Contact Resistance: Maximum of 1 mø 5 mating cycles 5. Vibration 1 cycles each for the three axial directions (1 cycle = 5 No electrical discontinuity of 1 µ or greater Resistance minutes) at frequency 1-55 Hz, half amplitude.75 mm 6. Shock Acceleration: 49 m/s 2, Retention time: 11 ms, Semisinusoidal 3 axes both directions 3 times each. No electrical discontinuity of 1 µ or greater Resistance 7. Humidity Contact Resistance:Maximum of 1 mø Resistance Insulation Resistance: Minimum of 1, Mø 96 hours at temperature: 4ç and humidity: 9~95% Contact Resistance: 8. Temperature Temperature -55 ç 85ç Maximum of 1 mø Cycles Time 3 3 minutes 5 cycles Insulation Resistance: Minimum of 1, Mø (Note 1) Includes the temperature rise of power lines (Note 2) The term storage refers to the long-term storage condition of unused products before PCB mounting. (Note 3) Rated current is per contact. Materials Right angle receptacle/right angle header/straight header Component Materials Color/Finish Specifi cations Insulator Polyamide resin Black UL94V- Signal Contact Phosphorous bronze Contact part: Gold plating Mounting part: Gold plating MF Contact Phosphorous bronze Contact part: Gold plating Mounting part: Pure tin plating Straight header 1 mm height /Straight receptacle 15 mm and 2 mm heights Component Materials Color/Finish Specifi cations Insulator Polyamide resin Black UL94V- Signal Contact Phosphorous bronze Contact part: Gold plating Mounting part: Gold plating MF Contact Copper alloy Contact part: Gold plating Mounting part: Pure tin plating Straight receptacle 1 mm height Component Materials Color/Finish Specifi cations Insulator Polyamide resin Black UL94V- Signal Contact Copper alloy Contact part: Gold plating Mounting part: Gold plating MF Contact Copper alloy Contact part: Gold plating Mounting part: Pure tin plating Interposer 15 mm height Component Materials Color/Finish Specifi cations Insulator Polyamide resin/pbt resin Black UL94V- Signal Contact Copper alloy Contact part: Gold plating MF Contact Copper alloy Contact part: Gold plating

3 Product Number Structure Refer to the charts below for determining specific part number characteristics. Please select connectors listed in this catalog when placing orders and be sure to check the latest delivery specifications at the time of ordering the product. FX18-6 S -.8 SH FX18-6 P -.8 SH FX18-6 P -.8 SV 1 FX18 Series Mating Diagram Right angle receptacle FX18-**S-.8SH Straight receptacle FX18-**S-.8SV1 FX18-**S-.8SV15 FX18-6 S -.8 SV 15 Coplanar connection Right angle connection Parallel connection (2 piece) FX18-6 PS -.8 H 15 Series Name No. of Contacts Connector Type Contact Pitch Product Shape Stacking Height FX18 S: Receptacle type P: Header type :.8 mm SH: Right angle type SV: Straight type H: Interposer type Right angle header FX18-**P-.8SH Straight header FX18-**P-.8SV FX18-**P-.8SV1 FX18-**S-.8SV2 Parallel connection (3 piece) FX18-**PS-.8H15 Fixed mating side Interface mating/unmating side 3

2 piece Parallel Connection Type Straight header FX18-**P-.8SV** Straight receptacle FX18-**S-.8SV** Stack height variation table (2 piece) FX18-**P-.8SV FX18-**P-.8SV1 FX18-**S-.

4 2 piece Parallel Connection Type Straight header FX18-**P-.8SV** Straight receptacle FX18-**S-.8SV** Stack height variation table (2 piece) FX18-**P-.8SV FX18-**P-.8SV1 FX18-**S-.8SV1 1mm 2mm FX18-**S-.8SV15 15mm 25mm FX18-**S-.8SV2 2mm 3mm 3 piece parallel connection type Interface mating/ unmating side Fixed mating side BSI Data Contact assignment We recommend the following contact configuration to match 1 ohm differential impedance and reduce crosstalk. Contact assignment (4 pos.) Coplanar connection type showing signal contact shape Contact No.1 Contact No.21 Impedance Straight header FX18-**P-.8SV** Interposer FX18-**PS-.8H15 Straight receptacle FX18-**S-.8SV** Satisfies 1 ø ±1% at Tr = 35 ps Contact No. 2 Contact No. 4 Signal pin Diff pair Ground pin FX18-**PS-.8H15 FX18-**P-.8SV FX18-**P-.8SV1 FX18-**S-.8SV1 25mm 35mm FX18-**S-.8SV15 3mm 4mm FX18-**S-.8SV2 35mm 45mm Z (Ohms) 1 Z (Ohms) Time (ns) Time (ns) 4

5 Insertion loss Maintains a good insertion loss of up to 1 GHz S (db) -1.5 S (db) Return loss Enough margin to satisfy IEEE82.3ap 1 Gbps transmission protocol. RL (db) RL RL (db) RL IEEE Spec IEEE Spec NEXT Lower crosstalk up to 1 GHz S12 S S (db) -3 S (db)

6 Contact assignment (4 pos.) Contact assignment (4 pos.) FEXT S (db) Lower crosstalk up to 1 GHz ICR-FEXT S14 Enough margin to satisfy IEEE82.3ap 1 Gbps transmission protocol. 6 Fig 1. Signal pin Diff pair Ground pin S (db) S14 Fig 2. Signal pin Diff pair Ground pin ICR (db) 3 ICR (db) ICR IEEE spec ICR IEEE spec

Right angle receptacle Part No. HRS No. A B C D E F G FX18-4S-.8SH CL579-9-4 15.2 27.9 25. 18.4 24.65 2 21 4 FX18-6S-.8SH CL579-1-3 23.2 35.9 33. 26.4 32.65 3 31 6 FX18-8S-.8SH CL579-11-6 31.2 43.

7 Right angle receptacle Part No. HRS No. A B C D E F G FX18-4S-.8SH CL FX18-6S-.8SH CL FX18-8S-.8SH CL FX18-1S-.8SH CL FX18-12S-.8SH CL FX18-14S-.8SH CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details Part No. HRS No. A B C D E F G FX18-4P-.8SH CL FX18-6P-.8SH CL FX18-8P-.8SH CL FX18-1P-.8SH CL FX18-12P-.8SH CL FX18-14P-.8SH CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details 7

Straight header Straight header (1 mm stack height) Part No. HRS No. A B C D E F G FX18-4P-.8SV CL579-16- 27.9 15.2 24.95 18.4 24.65 2 21 4 FX18-6P-.8SV CL579-17-2 35.9 23.2 32.95 26.4 32.

8SV CL579-21- 67.9 55.2 64.95 58.4 64.65 7 71 14 Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details Part No. HRS No.

8 Straight header Straight header (1 mm stack height) Part No. HRS No. A B C D E F G FX18-4P-.8SV CL FX18-6P-.8SV CL FX18-8P-.8SV CL FX18-1P-.8SV CL FX18-12P-.8SV CL FX18-14P-.8SV CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details Part No. HRS No. A B C D E F G FX18-4P-.8SV1 CL FX18-6P-.8SV1 CL FX18-8P-.8SV1 CL FX18-1P-.8SV1 CL FX18-12P-.8SV1 CL FX18-14P-.8SV1 CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details 8

A.2 Straight receptacle (1 mm stack height) No.H B.15 C.2 P=.8.15.35.1 No.G No.F No.1 6.7.3 7.8.2 3.6.15 5.1.2 D.25 E.25 1.35.15.3 Part No. HRS No. A B C D FX18-4S-.8SV1 27.9 25 15.2 18.4 26.

9 A.2 Straight receptacle (1 mm stack height) No.H B.15 C.2 P= No.G No.F No D.25 E Part No. HRS No. A B C D FX18-4S-.8SV FX18-6S-.8SV FX18-8S-.8SV FX18-1S-.8SV FX18-12S-.8SV FX18-14S-.8SV1 CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details Straight receptacle (15 mm stack height) Part No. HRS No. A B C D FX18-4S-.8SV15 CL FX18-6S-.8SV15 CL FX18-8S-.8SV15 CL FX18-1S-.8SV15 CL FX18-12S-.8SV15 CL FX18-14S-.8SV15 CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details 9

Straight receptacle (2 mm stack height) Part No. HRS No. A B C D E F G H (No. of contacts) FX18-4S-.8SV2 CL579-3- 27.9 25 15.2 18.4 26.5 2 21 4 FX18-6S-.8SV2 CL579-31-3 35.9 33 23.2 26.4 34.

10 Straight receptacle (2 mm stack height) Part No. HRS No. A B C D E F G H (No. of contacts) FX18-4S-.8SV2 CL FX18-6S-.8SV2 CL FX18-8S-.8SV2 CL FX18-1S-.8SV2 CL FX18-12S-.8SV2 CL FX18-14S-.8SV2 CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details A.2 Interposer (15 mm height) B.2 P=.8.15 C No.1 No.E No.F P=.8.15 B.2 D.15 No.G Part No. HRS No. A B C D E F FX18-4PS-.8H FX18-6PS-.8H FX18-8PS-.8H FX18-1PS-.8H FX18-12PS-.8H FX18-14PS-.8H15 CL Indicates products that are currently available. Other contact counts may be under development, contact your local rep for details 1

11 Recommended Land Pattern Dimensions (PCB thickness: t = 1.6 mm/metal mask thickness: t =.12 mm) Right angle receptacle/right angle header 6.5±.5 4.5± ± (TH) 1.1 (TH) 1.1 (TH) (TH) R.5 Straight header 2.1 (TH) P=.8±.5 A±.5 B±.5 C± Straight header (SV 1 mm height ) ±.5 8.4±.5 PCB EDGE Straight receptacle (SV1/SV15/SV2 mm heights ) Part No. A B C FX18-4S-.8SH FX18-4P-.8SH FX18-6S-.8SH FX18-6P-.8SH FX18-8S-.8SH FX18-8P-.8SH FX18-1S-.8SH FX18-1P-.8SH FX18-12S-.8SH FX18-12P-.8SH FX18-14S-.8SH FX18-14P-.8SH Part No. A B C FX18-4P-.8SV FX18-6P-.8SV FX18-8P-.8SV FX18-1P-.8SV FX18-12P-.8SV FX18-14P-.8SV Part No. A B C FX18-4P-.8SV FX18-6P-.8SV FX18-8P-.8SV FX18-1P-.8SV FX18-12P-.8SV FX18-14P-.8SV Part No. A B C FX18-4S-.8SV1/15/ FX18-6S-.8SV1/15/ FX18-8S-.8SV1/15/ FX18-1S-.8SV1/15/ FX18-12S-.8SV1/15/ FX18-14S-.8SV1/15/

12 Packaging tray (dimensions and quantities) Right angle receptacle/right angle header Part No. FX18-4S-.8SH FX18-4P-.8SH Quantity 7 Straight header/straight receptacle for 1 mm stack height FX18-6S-.8SH FX18-6P-.8SH FX18-8S-.8SH FX18-8P-.8SH FX18-1S-.8SH FX18-1P-.8SH FX18-12S-.8SH FX18-12P-.8SH FX18-14S-.8SH FX18-14P-.8SH Part No. FX18-4P-.8SV FX18-4S-.8SV1 FX18-6P-.8SV FX18-6S-.8SV1 FX18-8P-.8SV FX18-8S-.8SV1 FX18-1P-.8SV FX18-1S-.8SV Quantity FX18-12P-.8SV FX18-12S-.8SV1 4 FX18-14P-.8SV FX18-14S-.8SV1 4 12

13 Interposer 15 mm height Part No. FX18-4P-.8SV1 FX18-4S-.8SV15 FX18-4S-.8SV2 FX18-6P-.8SV1 FX18-6S-.8SV15 FX18-6S-.8SV2 FX18-8P-.8SV1 FX18-8S-.8SV15 FX18-8S-.8SV2 FX18-1P-.8SV1 FX18-1S-.8SV15 FX18-1S-.8SV2 FX18-12P-.8SV1 FX18-12S-.8SV15 FX18-12S-.8SV2 FX18-14P-.8SV1 FX18-14S-.8SV15 FX18-14S-.8SV2 Quantity Part No. Quantity FX18-4PS-.8H15 6 FX18-6PS-.8H15 6 FX18-8PS-.8H15 5 FX18-1PS-.8H15 4 FX18-12PS-.8H15 4 FX18-14PS-.8H

14 Temperature Profile This temperature profile was tested under the following conditions, and any attempt to recreate will vary depending on the external conditions. Temperature (ç) Washing conditions Washing with organic solvent Washing in normal temperature Washing in heated condition Water based cleaning When using water based cleaning agents (including terpene, and alkali saponifiers), pay special attention to how the cleaning agent will react to specific metals and plastics before selecting one of them. Various cleaning agent manufacturers publish reaction tables for their cleaning agents. Do not leave connectors with moisture remaining on them. Cautions when washing The electrical performance may deteriorate if the flux or cleaning detergent is left on the connector after the cleaning. Check thoroughly to ensure that there is no residue left on any of the surfaces. Operating Precautions Mating gap permitted The effective mating length of the MF contact A is 2.5 mm, signal contact is 2 mm and MF contact B is 1.5 mm. The approved amount of gap between the header and receptacle should not exceed 1 mm. No more than 1 mm 15ç 2ç (9 to 12 seconds) Preheating time (15 to 2ç) (Peak temperature: 25ç MAX) (Maximum of 6 seconds) Soldering time (22ç or above) No more than 1 mm 22ç (Applicable Conditions) Test PCB Size Dimensions : (mm) Material : Glass epoxy Solder composition : Sn- 3 Ag-.5 Cu Flux contained quantity : 11 wt Metal mask thickness :.12 mm (Note 1) This temperature profile contains recommended values and is for reference only. (Note 2) Reflow process should not exceed 2 times. (Note 3) Cream solder type: Will differ due to the amount used and manufacturer No more than 1 mm Interface Fixed mating No more than 1 mm Coplanar connection type Right angle connection type Parallel connection type (2 piece) Parallel connection type (3 piece) Provide another form of support to the PCB, this connector was not designed to be the main form of support. Do not mate the connectors at an angle, refer to the rotation mating/unmating guideline (TADC ). (For the guideline, please contact the sales representative of our company.) When using the 15 mm height interposer, be cautious of the items listed below. 1) The lock on the fixed mating side of the interposer is not designed to be the mate/unmate point. This section should not be mated/unmated more than 5 times. 2 When mating these connectors, make sure to mate the fixed mating side first then mate the interface mating/umating side to the header. 3) The effective mating length of the MF contact A is 2.5 mm, signal contact is 2 mm and MF contact B is 1.5 mm. 4) The approved amount of gap between the header and receptacle should not exceed 1 mm. 14

15 MEMO : 15

16 Powered by TCPDF ( FX18 Series High Speed Transmission,.8 mm Pitch Connectors for PCB Connections USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. San Jose Office 3255 Scott Boulevard, Building 7, Suite 11 Santa Clara, CA 9554 Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) Professional Center Drive, Suite #1C Livonia, MI Phone : Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 111 CC Amsterdam Z-O Phone : Fax : CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. 161,Henderson Metropolitan,NO.3,East Nanjing Road,Huangpu District, Shanghai,China 21 Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 11, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 1 Anson Road #26-1 International Plaza 7993 Phone : Fax : MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office) 1-1-7, Penang Cybercity (1164),Lintang Mayang Pasir 3,1195, Bayan Baru, Penang, Malaysia. Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. German Branch Herzog-Carl-Strasse 4 D-7376 Ostfildern (Scharnhauser Park) Phone : Fax : CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. Beijing Branch A11, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, 125 Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 13 8F, No.87, Zhengzhou Rd., Taipei Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office Unit No.3, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 5666 Karnataka, India Phone : Fax : UNITED KINGDOM: HIROSE ELECTRIC EUROPE B.V. UK Branch 22 Vincent Avenue, Crownhill Business Centre, Crownhill, Milton Keynes, MK8 AB Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 9-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 52, ShenNanDong Road, ShenZhen City, Guangdong Province, 5188 Phone : Fax : KOREA: HIROSE KOREA CO., LTD , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,7124 Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office Suite No. 66 5th Floor SB Tower 1A/1 Sector 16 A Filmcity Noida 2131 Uttar Pradesh-India Phone : Fax : ,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 1/214. Contents are subject to change without notice for the purpose of improvements.

Floating Stacking 0.5mm Pitch Board to Board Connector

Floating Stacking 0.5mm Pitch Board to Board Connector FX20 Series X direction Floating range : 0.6 to 0.8mm Y direction Floating range : 0.6mm Features 1. 0.5mm pitch 2. Connection type: Stacking 3. Number