1.25mm Pitch Miniature Crimping Connector
|
|
- Alvin Sherman
- 5 years ago
- Views:
Transcription
1 1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting height.mm. (SMT mounting straight type) (For DIP type, the mounting height is to.mm to the straight and.mm at the right angle). Multi-contact The double row type achieves the multi-contact up to 0 contacts, and secures 0% higher density in the mounting area, compared with the single row type.. Correspond to Automatic Mounting The header provides the grade with the vacuum absorption area, and secures automatic mounting by the embossed tape packaging. In addition, the tube packaging can be selected.. Integral Basic Function Despite Miniature Size The header is designed in a scoop-proof box structure, and completely prevents mis-insertion. In addition, the surface mounting (SMT) header is equipped with the metal fitting to prevent solder peeling. Correspond to Automatic Mounting Secure the automatic plain area for the absorption type automatic mounting machine. Straight Type Right Angle Type Metal fitting Absorption area Absorption area Applications Note PC, mobile terminal, miniature type business equipment, and other various consumer equipment, including video camera Figure 1 B1
2 Product Specifications Rating Current rating 1A Operating Temperature Range: - to +ç (Note 1) Storage Temperature Range: - to +0ç(Note ) Voltage rating 10V AC Operating Moisture Range: 0 to 0% Storage Moisture Range: 0 to 0% (Note ) Item Specification Condition 1.Insulation Resistance 00M ohms min. 0V DC.Withstanding voltage No flashover or insulation breakdown. 00V AC/1 minute.contact Resistance 0m ohms max. 0mA.Single Insertion/Extraction Force 0.N (0gf) min., N (00gf) max. Measured at the square steel pin of 0.±0.00mm.Vibration No electrical discontinuity of 1µs or more Frequency: to Hz, single amplitude of 0. mm, hours in each of the directions..humidity (Steady state) Contact resistance: 0m ohms max. Insulation resistance: 00M ohms min. hours at temperature of 0ç and humidity of 0% to %.Temperature Cycle Contact resistance: 0m ohms max. Insulation resistance: 00M ohms min. (-ç: 0 minutes to ç: minutes ç: 0 minutes to ç: minutes) cycles.durability (Mating/un-mating) Contact resistance: 0m ohms max. Tin plating: 0 cycles Gold plating: 0 cycles.resistance to Soldering heat No deformation of components affecting performance. Flow: 0ç for seconds Manual soldering: 00ç for seconds Reflow: At the recommended temperature profile Manual soldering: 00ç for seconds Note 1: Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Beige ULV-0 Crimping Contact for Socket Contact Phosphor copper Tin plated or gold plated ---- Pin Header (Through hole) Insulator Polyamide Beige ULV-0 Contact Brass Tin plated ---- Insulator Polyamide Beige ULV-0 Pin Header (SMT) Contact Brass Tin plated or gold plated ---- Metal Fitting Phosphor copper Tin plated ---- Ordering Information Connector DF1 q # - * S - 1. C w e r t y q Series Name : DF1 e Number of Contacts t Contact Pitch: 1.mm w Style Symbol : Blank: With boss r Single row: to,, 1 y Contact Type V Type A: Without boss B: With boss, embossed tape type C: Without boss, embossed tape type r Double row:, 0, 0, 0 r Connector Type t S: Single row socket / P: Single row pin header t DS: Double row socket / DP: Double row pin header C : Crimping socket / DSA : Straight through hole DS : Right angle through hole / V : Straight SMT H : Right angle SMT Contact DF 1-0 SCF A q w e q Applicable Cable Size 0: AWG to 0 w Packaging Type SCF: Socket Contact/Reel e Plating Type Blank: Tin plated A : Gold plated B
3 Single Row Socket [Specific No.] - **, (**) Blank: 1 bag: 0 pcs. Photo: Contact insertion Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B DF1-S-1.C(**) ** 1..1 DF1- S-1.C(**) **.00.0 DF1-S-1.C(**) **.0.0 DF1-S-1.C(**) **..1 DF1-S-1.C(**) **.. DF1-S-1.C(**) -00--** DF1-S-1.C(**) **.00.0 DF1-S-1.C(**) -00--** 1.. DF1-S-1.C(**) **..1 DF1-S-1.C(**) **. 1.1 DF1-S-1.C(**) **.0.0 DF1-1S-1.C(**) -00--** DF1-S-1.C(**) **.. Note 1.The quantity at the specific No. "None" is delivered per bag (0 pcs.). If needed, please select and order the products per bag. Double Row Socket Photo: Contact insertion state Part Number DF1-DS-1.C(**) CL No ** Number of Contacts A.0 B.00 [Specific No.] **, (**) Blank: 1 bag: 0 pcs. DF1-0DS-1.C(**) -0--** 0.. DF1-0DS-1.C(**) -00--** DF1-0DS-1.C(**) -0-0-** 0.1. Note:The quantity at the specific No. "Blank" is delivered per bag (0pcs). If needed, please select and order the products per bag. B1
4 Single Row Straight Pin Header (Through hole) [Specific No.] **, (**) Blank: Tin plated 0: Tin plated, tube packaging BTube Dimensions Board Through-hole Diameter:Ø0.±0.0 Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B DF1-P-1.DSA(**) DF1-P-1.DSA(**) DF1-P-1.DSA(**) DF1-P-1.DSA(**) DF1-P-1.DSA(**) DF1-P-1.DSA(**) DF1-P-1.DSA(**) -01--** -0-1-** -0--** -0--** -0-0-** -0--** -0--** DF1- P-1.DSA(**) DF1-P-1.DSA(**) DF1-P-1.DSA(**) DF1-P-1.DSA(**) DF1-1P-1.DSA(**) DF1-P-1.DSA(**) DF1-1P-1.DSA(**) -0--** -0-0-** ** -01--** -01--** -0--** ** Note 1.The quantity at the specific No. "None" is delivered per bag (0 pcs.). If needed, please select and order the products per bag. Single Row Right Angle Pin Header (Through hole) [Specific No.] **, (***) (0): Tin plated tube packaging BTube Dimensions Board Through-hole Diameter:Ø0.±0.0 Part Number CL No. Number of Contacts A B Tube Packaging Quantity Part Number CL No. Number of Contacts A B Tube Packaging Quantity DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) -0--** -0-0-** -01--** -0--** -01--** ** -01--** DF1- P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-P-1.DS(**) DF1-1P-1.DS(**) -01--** -01--** -00--** ** -0--** -0--** Note 1.Order the tube packaging product, multiplying the tube packaging quantity. B1
5 BSingle Row Straight Pin Header (SMT) [Specific No.] **, (**) (0): Tin plated tube package (0): Gold plated tube package This pin header is a box type style. Therefore, the header has neither vacuum absorption face nor embossed tape packaging specification. Part Number CL No. Number of Contacts A B C D E F DF1- P-1.V(**) ** DF1- P-1.V(**) -00--** DF1- P-1.V(**) -00--** DF1- P-1.V(**) ** DF1- P-1.V(**) -00--** DF1- P-1.V(**) -00--** DF1- P-1.V(**) ** DF1- P-1.V(**) -00--** DF1-P-1.V(**) -00--** DF1-P-1.V(**) -0--** DF1-P-1.V(**) -0--** DF1-P-1.V(**) -01--** DF1-1P-1.V(**) -0--** Note:Please order the tube packaging products, multiplying the tube packaging quantity. Tube Package Quantity Remark Guide post BPCB mounting pattern BTube Dimensions Note:If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact. B1
6 Single Row Straight Pin Header (SMT) (Three-Wall/Correspond to Vacuum Absorption) BPCB mounting pattern Note 1.This hole isn't needed for "No guide post". Note.If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact. [Specific No.] **, (**) (0): Tin plated tube packaging (1): Tin plated embossed tape packaging (0): Gold plated tube packaging (1): Gold plated embossed tape packaging Part Number DF1B- P-1.V(**) DF1B- P-1.V(**) DF1B- P-1.V(**) DF1B- P-1.V(**) DF1B- P-1.V(**) DF1B- P-1.V(**) DF1B- P-1.V(**) DF1B- P-1.V(**) DF1B-P-1.V(**) DF1B-P-1.V(**) DF1B-P-1.V(**) DF1B-P-1.V(**) DF1B-1P-1.V(**) DF1C- P-1.V(**) DF1C- P-1.V(**) DF1C- P-1.V(**) DF1C- P-1.V(**) DF1C- P-1.V(**) DF1C- P-1.V(**) DF1C- P-1.V(**) DF1C- P-1.V(**) DF1C-P-1.V(**) DF1C-P-1.V(**) DF1C-P-1.V(**) DF1C-P-1.V(**) CL No ** -00--** -00--** ** -00--** -00--** -00--** ** -00--** ** ** ** -00--** ** -00--** -00--** ** -00--** -00--** -00--** ** -00--** -0--** -0--** ** Number of Contacts 1 A DF1C-1P-1.V(**) -0--** Note 1.Please order the tube packaging product, multiplying the tube packaging quantity. Note.Please order the embossed tape packaging product according to reel number. (00 pcs. per reel) B C D E F G Tube Packaging Quantity pcs pcs Emboss Width Remarks With boss Without boss B1
7 Single Row Right Angle Pin Header (SMT) (Four-Wall/Correspond to Emboss Absorption) BPCB mounting pattern BTube Dimensions [Specific No.] **, (**) (0): Tin plated tube packaging (1): Tin plated embossed tape packaging (0): Gold plated tube packaging (1): Gold plated embossed tape packaging Part Number DF1- P-1.H(**) DF1- P-1.H(**) DF1- P-1.H(**) DF1- P-1.H(**) DF1- P-1.H(**) DF1- P-1.H(**) DF1- P-1.H(**) DF1- P-1.H(**) DF1-P-1.H(**) DF1-P-1.H(**) DF1-P-1.H(**) DF1-P-1.H(**) DF1-1P-1.H(**) DF1A- P-1.H(**) DF1A- P-1.H(**) DF1A- P-1.H(**) DF1A- P-1.H(**) DF1A- P-1.H(**) DF1A- P-1.H(**) DF1A- P-1.H(**) DF1A- P-1.H(**) DF1A-P-1.H(**) DF1A-P-1.H(**) DF1A-P-1.H(**) DF1A-P-1.H(**) CL No ** -0--** -0--** -0-0-** -0--** -0--** -0--** -0-0-** -0--** -00--** -01--** -0-0-** -0--** ** ** -00--** -00--** -00--** ** -00--** -00--** ** -0--** -0-1-** -01--** Number of Contacts 1 A DF1A-1P-1.H(**) -0-0-** Note 1.Please order the tube packaging product, multiplying the tube packaging quantity. Note.Please order the embossed tape packaging product according to reel number. (00 pcs. per reel) B C D E Tube Packaging Quantity pcs pcs Emboss Width Remarks With boss Without boss B1
8 Double Row Straight Pin Header (SMT) (Four-Wall Type Compliant to Emboss Absorption) BPCB mounting pattern BTube Dimensions Note 1.If the pattern exists in the shaded area, and isn't treated with resist, it could touch the connector contact. Note.The hole isn't needed at "Without boss". [Specific No.] - **, (**) (0): Tin plated tube packaging (): Tin plated embossed tape packaging (0): Gold plated tube packaging (): Gold plated embossed tape packaging Number of Specification Specification Specification Specification Tube Package Emboss Part Number DF1A-DP-1.V(**) CL No. -0--** Contacts A.1 B C. D. (0) K () K (0) K () K Quantity 0 pcs Width Remarks DF1A-0DP-1.V(**) ** K K K K With DF1A-0DP-1.V(**) ** K K 1 boss DF1A-0DP-1.V(**) -0--** K K 1 DF1A-DP-1.V(**) **.1. K K K K 0 DF1A-0DP-1.V(**) -00--** K K K K Without DF1A-0DP-1.V(**) -0--** K K 1 boss DF1A-0DP-1.V(**) -01--** K K 1 Note 1.Please order the tube packaging product, multiplying the tube packaging quantity. Note.Please order the embossed tape packaging product according to reel number. (1 reel: 00 pcs.) Note.The absorption cap is attached to the embossed tape packaging product. B10
9 Crimping Contact Part Number CL No. Packaging Type Quantity Finish DF1-0SCF Reel,000 Tin plating DF1-0SCFA -0- Reel,000 Gold plating Applicable Cable (Tin Plating Annealed Copper Wire) Conductor Size (Wire construction) Jacket Diameter AWG( cores./0.mm) AWG( cores./0.mm) Ø0. to Ø1.0mm AWG0( cores./0.1mm) Note:If other cables are used instead of the applicable cable, please contact the Hirose sales department. Recommended Cable UL Strip Length 1. to 1.mm BApplicable Crimping Tool Type Part Number CL No. Applicable Contact Applicator AP-DF1-0S DF1-0SCF/SCFA Press Main Unit CM Manual Crimping Tool DF1-TB0HC DF1-0SCF Extraction Tool DF-C-PO(B) DF1-0SCF Note 1.If a trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any product. Note.The manual crimping tool is used to sequentially cut the reel contact with carrier. BApplication Pattern SMT (Single Row Product) Through hole (Single Row Product) SMT (Double Row Product) Straight Right Angle B11
10 BEmbossed Carrier Tape Dimensions KDF1B-*P-1.V With boss KDF1C-*P-1.V Without boss KDF1-*P-1.H KDF1A-*P-1.H Product Type Number of Contacts A B C D DF1B-*P-1.V DF1C-*P-1.V DF1-*P-1.H DF1A-*P-1.H, to 0 to Note:The 1 contacts is not serialized. B1
11 BPrecautions 1. Recommended Temperature Profile (SMT) Note 1.This process is allowed up to twice under the same condition. However, the interval between the first and second processes must be maintained at the room temperature. Note.The temperature indicates the board surface temperature in the connector lead area.. Recommended Soldering Manual soldering: 0ç for seconds Condition (SMT). Recommended Screen 0.1 to 0.mm Thickness (SMT). Board Warpage (SMT) Max 0.0mm in the connector center area, based on both connector edges. Recommended Soldering Flow: 0ç for seconds. Condition (Through hole) Manual soldering: 0ç for seconds. Cleaning Condition Refer to Nylon Connector Use Hand book.. Connection Condition Refer to Nylon Connector Use Hand book. Carefully carry out the crimping operation according to "Crimping Condition Sheet" and "Crimping Quality Standard", because the crimping contact is an extremely small style.. Cautions Be careful for the excessive scoop insertion/extraction, which will cause damage to the product. B1
0.65mm Pitch SMT Board to Board Connector
0.65mm Pitch SMT oard to oard onnector 15 Series orresponding to automatic mounting The vacuum area is secured the automatic mounting machine for vacuum. igure 1 eatures 1. ompatibility of Miniaturization
More information0.5mm Pitch SMT Board to Board Connector
The product information in this catalog is for reference only. Please request the ngineering rawing for the most current and accurate design information. ll non- products have been discontinued, or will
More information0.5mm Pitch SMT Board to Board Connector
.5mm Pitch SMT oard to oard onnector DF16 Series orrespond to Automatic Mounting The vacuum pick-up area is prepared for automatic mounting machine. Features 1. Miniaturizing and Slimming In addition to.5mm
More information0.65mm Pitch SMT Board to Board Connector
0.65mm Pitch SMT oard to oard onnector 15 Series orresponding to automatic mounting The vacuum area is secured the automatic mounting machine for vacuum. igure 1 eatures 1. ompatibility of Miniaturization
More informationRibbon Cable connector Compliant with MIL Standard
Ribbon Cable connector Compliant with MIL Standard HIF3B Series Features 1. Product Compliant with MIL Standard HIF3B series has been developed as a product compliant with MIL standard, and used for wide
More informationSubstrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source
Substrate Twin (Pair) Cable Swing-Lock Connector for Low-Profile Power Source DF57 Series Swing-Lock Structure explanatory drawing Before mating Lock portion Features 1.Reinforced lock structure with swing
More information3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationCard Edge Type Ribbon Cable Connector
Card Edge Type Ribbon Cable Connector HIF5 Series pplications Computers, FDD, various kinds of electronic equipment. Features 1. Product Variation The area to install the connector body is classified into
More informationLow Profile 0.5mm Pitch Connectors For FPC
Low Profile 0.5mm Pitch Connectors For FPC FH17 Series FH17 (on-board type) flip-lock mechanism Features 1. Low profile 0.5mm pitch FPC connectors As products become lighter/thinner/shorter/smaller, requests
More informationCard Edge Type Ribbon Cable Connectors
Card Edge Type Ribbon Cable Connectors HIF5 Series Product Specifications Rating 1. Insulation Resistance 1000M min. 2. Withstanding voltage No flashover or insulation breakdown. 3. Contact Resistance
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series Receptacle (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More information4.5 mm pitch, Horizontal Mating 2-Piece System Connectors
NW 4.5 mm pitch, Horizontal Mating 2-Piece System Connectors D64 Series (UL pending) The floating structure of the BTB connection provides increased flexibility by absorbing the movement of the PCB s.
More informationHirose Korea Board To Board Connector
Hirose Korea Board To Board Connector KN13-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products ---------------------------------
More informationHirose Korea Board To Board Connector
Hirose Korea Board To Board Connector BM30-Series 1. Characteristic of Products ------------------------------------------------- 2 page 2.Specifications & Formation of Products --------------------------------
More informationStandard Connectors. MD Series NEW
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
More informationFeatures. FX22 Series NEW
NEW FX22 Series Floating range: ±.6mm Z X Fig.1 Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam
More informationFeatures. FX22 Series
FX22 Series Floating range: ±.6mm Z X Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam contact
More information0.35mm Pitch 0.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board
NEW.35mm Pitch.8mm Height Hybrid Power/Signal Connectors for Board-to-Board and FPC-to-Board BM24 Series Conventional type (P=.35 mm, 2 contacts) Features 1 Rated current : 5A The compact BM24 Series features
More informationFloating Stacking 0.5mm Pitch Board to Board Connector
Floating Stacking 0.5mm Pitch Board to Board Connector FX20 Series X direction Floating range : 0.6 to 0.8mm Y direction Floating range : 0.6mm Features 1. 0.5mm pitch 2. Connection type: Stacking 3. Number
More information0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector
0.4/0.5 mm Pitch, 1.5 mm Height, High Speed Transmission (5 + Gbps) FPC Connector FH55/FH55M Series Dimensions: 40 pos Features 1. High-Speed Transmission(5 + Gbps) FPC Connector Capable of transmitting
More informationNARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S
NARROW-PITCH CONNECTORS FOR BOAR-TO-BOAR CONNECTION NARROW PITCH (0.6mm) CONNECTORS P6 SERIES P6S Compliance with RoHS irective FEATURES 1. Bellows-type contacts Bellows-type contacts resist mating stress
More informationHS h e n EU omplia t 2002 / 9 5 / C
9 57-30500 0 0 E U 2 C A mp hen 2/ 5 / E omplia Ro HS ol C nt hen z n She 57-30360 DE-09P & DE-09S Standards: UL File: E119881 Connectors according to MIL C24308 SPECIFICATIONS : MATERIALS AND Shells Steel
More informationNARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 8
Amphenol Amphenol Taiwan Corporation Sheet 1 of 8 Title: Part Number: Description: Micro Power Plus Product Specification G88MP Series 3.0 mm Pitch, PCB Mount / Cable Crimping Type Revisions Control Rev.
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: Micro Power Wafer Product Specification G881A / G881B / G881MA / G881H / G881C 3.0 mm Pitch, PCB Mount / SMT Type / CRIMPING
More informationNARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION NARROW PITCH (0.4mm) CONNECTORS P4S SERIES Compliance with RoHS Directive http://www.mew.co.jp/ac/e/ FEATURES 1. Space saving Compared to the currently sold
More information10 + Gbps 0.5mm pitch Stacking Connectors
1 + Gbps.5mm pitch Stacking onnectors XG1 Series 1.3 1.1 Mechanical Features.5mm Pitch / ouble-row SMT Stacking Height : 15~23mm ( 2 pieces ) 25~44mm ( 3 pieces ) Number of ontacts : / / 14 / 1 / 156 /
More informationJN FPC P CONNECTOR MANUFACTURER SIGNATURE
DOC. NO.: - ISSUE DATE: 20 / / CUSTOMER: PART NAME: PART NO.: FPC P CONNECTOR 1 APP. DATE: MANUFACTURER SIGNATURE P-TWO INDUSTRIES INC. NO. 9, SHIN HWA RD, KWEI SHAN IND. PARK TAOYUAN, 330 TAIWAN, R.O.C.
More information3M 4-Wall Header Low Profile, SMT Straight, Straight and Right Angle Thru Hole2500 Series
M 4-Wall Header.100.100 Low Profile, SMT Straight, Straight and Right ngle Thru Hole2500 Series Low profile, space saving design Center slot polarization prevents mis-insertions and reduces insertion time
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM RLC10, 16, 20, 32, 35, 50, 63. AEC-Q200 qualified
No.: RLC-K-HTS-0001 /17 Date: 2017. 4. 21 Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM Style: RLC10, 16, 20, 32, 35, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and
More informationCircular Connectors Conforming to JIS C 5432
Circular Connectors Conforming to JIS C 5432 JR Series Features 1. These round connectors conform to JIS C 5432 "Circular connectors for electric appliances." Product Specifications Ratings Ratings Ratings
More informationMAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
More informationCannon Trident Connector System
These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly
More informationSp e c i f i c a t i o n
K M Y Last update: 2015.4.4 No.RLC-K-HTS-0001-15 (Uncontrolled copy) Sp e c i f i c a t i o n (Reference) FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND LOW OHM Style: RLC10, 16, 20, 32, 35, 50,
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible with lead-free solder processes Extensive pin count availability from 4 to
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 1.0 SCOPE This Product Specification covers the 3.96 mm (.156 inch) centerline
More information3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series
3M Pin Strip Header 2 mm and 2 mm x 2 mm Straight, Surface Mount 951 Series High temperature dielectric No lead reflow solder compatible Maximizes use of PC board space End stackable feature Mates with
More informationSpecifications A1251 SERIES. Standards E E326732
Specifications Current rating:1 C,DC Voltage rating:125v C,DC Temperature range:-40 C~+105 C Contact resistance:20m Max. Insulation resistance:100m Min. Withstanding voltage:500v C/minute *Compliant with
More informationAVX Specialty Catalog
AVX Specialty Catalog MOBO Connectors www.avx.com Version 16.4 Table of Contents BATTERY ORS........................................................... 2-35 Standard 2.5mm Pitch 9155-000.............................................
More informationTAPE THICKNESS.003 (0,08) .050 (1,27) Pitch .016 (0,41) Unless otherwise specified, tolerances are ±0.008 (0,20) TAPE.002 (0,05) .
Surface Mount SERIES 97 Half-Pitch Half the Size of Standard Switches Available in,, 6, 8, and 0 Positions Low Profile Less Mass for Easy Vacuum Pick & Place APPLICATIS Used in any application where space
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of PC board space Mates with boardmount and
More informationFrelTec GmbH. Shielded SMD Power Inductors
GmbH Mathildenstr. 10A 82319 Starnberg Germany 1/23/2014 1/11 GmbH www.freltec.com SPECIFICATION Part Number 171 7032 * 101 * M E0A ** Type Size Value Tolerance Packing 171 : Shielded SMD Power Inductor
More informationMulti-contact Compact Circular Connectors
Multi-contact Compact Circular Connectors RM Series Jun..06 Copyright 06 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Product Specifications Ratings Rated current Rated voltage [RM5] 0 ( and 4 contacts)
More information1,35 1,0 0,6. Scale - 6:1
Dimensions: [mm] Recommended Land Pattern: [mm] 3 4 0,5 0,6 1,5 O 0,65 +0,1-0,0 0,8 1 2 0,4 1 4,7 2 3 4 2,2 1,6 4,05 1 3,5 Scale - 6:1 1,0 1,35 Schematic: 3,9 ±0,15 h 0,1 ref. 0,5 0,6 1 2 2,9 3,55 3 4
More information3M Pin Strip Header, 1512 Series 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight
2 2 Solder Tail Straight & Right Angle, Surface Mount Straight Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible with lead-free solder processes
More informationDimensions: [mm] Recommended Land Pattern: [mm] Pattern Properties: Article Properties: Serie mm Screwless SMT - WR-TBL
Dimensions: [mm] Recommended Land Pattern: [mm] 1,2 ±0,30 1 End 2,4 ±0,30 2,5 ±0,10 0,10 ±0,10 Pl ±0,15 L1 ±0,15 L2 ±0,15 0,30 ±0,10 9 ±0,30 0,25 ±0,10 5 ±0,30 r 0,15 r 0,15 2,7 ±0,30 6,3 ±0,30 1 End 2,6
More informationTip Jacks. Johnson Components P.O. Box 1732 Waseca, MN Fax:
.060" (1.5 mm) Shrouded Tip Jack (Solder or Crimp) 5.060" (1.5 mm) Uninsulated Tip Jack (Solder or Crimp) 5.060 (1.50) Shrouded Tip Jack (Solder or Crimp) 5.060 (1.50) Uninsulated Tip Jack (Solder or Crimp)
More informationheavy mate D Rated voltage 250 V Rated current 10 A A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128
heavy mate D Rated voltage 250 V Rated current 10 A... 16 A Termination: crimp Number of contacts: 7, 15, 25, 40, 50, 64, 128 22 heavy mate D Brief information Approvals, Testhouse Characteristics Approval-Number
More information3Pin and Socket Connectors
AMPLIMITE Connectors Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-208 Industrial versions available that use the same manufacturing process of MIL-C-
More informationPIN Sockets & PIN Connectors General Specifications Part Numbers And Product Identification
Sockets & Connectors General Specifications Part Numbers And Product Identification GENERAL SPECIFICATIONS The values listed below are general specs applying for LEYCONN socket and pin connectors. Please
More informationCOSMTEC. SMA Female to N Female Adapter. RF Connector Technical Data Sheet S-024. Description Minimum Typical Maximum Units
Configuration SMA Female Connectr 1 N Female Connectr 2 50 Ohms SMA Female to N Female Adapter S-024 Features Max VSWR of 1.3:1 up to 18 GHz SMA Interface compliant with MIL-STD-348A N Interface compliant
More informationSMA SERIES COAXIAL CONNECTORS
General R Reference Standards MIL-PRF-3912 MIL-DTL-83517 MIL-STD-348 (Interface) IEC 6169-15 CECC 12211 Materials Bodies and nuts Contacts Insulators Gaskets Crimp ferrules Non-magnetic stainless steel
More information3M Pak Wall Header Latch/Ejector, Straight and Right Angle 3000 Series
Pak 100 4-Wall Header.100.100 Latch/Ejector, Straight and Right ngle 3000 Series Military (with 's 3518 polarizing key) and centerbump polarization Standard ejector latches Mounting holes for securing
More informationRecommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:
Dimensions: [mm] Recommended Land Pattern: [mm] pl 1 2 1,2 ±0,1 L 4 ±0,1 Pl 3 4,6 ±0,3 14 6 3,5 2 1 2 3 11,7 ±0,2 1,4 ±0,3 13,1 Pattern Properties: Pin to Pin (Middle) p l 8 mm Article Properties: Pins
More informationRecommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties:
Dimensions: [mm] Recommended Land Pattern: [mm] pl 1 2 1,2 ±0,1 L 4 ±0,1 Pl 3 4,6 ±0,3 14 6 3,5 2 1 2 3 11,7 ±0,2 1,4 ±0,3 13,1 Pattern Properties: Pin to Pin (Middle) p l 4 mm Article Properties: Pins
More informationContents B Description
Contents Description Page CONTACT TECHNOLOGY 1-12 General Technical Specifications 1 CLIPS 4 Printed Circuit Pins, Pin Connectors 5 Pin Receptacles, Sockets Contacts 8 DUAL-IN-LNE Sockets & PGA Sockets
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
Industry standard compatible High temperature dielectric "No lead" wave and reflow solder compatible Unique lengths available Maximizes use of P board space Mates with boardmount and wiremount products
More informationN-Series: High-Temperature Connectors
N-Series: High-Temperature Connectors DIMENSIONS NMHT I/O Cable (Male) NMHT interconnects are used in hightemperature applications. These rugged cable connectors come with a variety of termination, hardware
More information.050" 4 thru 25 Contacts
.050" 4 thru 25 Contacts MM-11... MM-12... MM-12, MK-16, MK-18 receptacles MM-11, MK-15, MK-17 plugs PAGE 1 OF 4 PAGES BODY CONTACTS OPTIONS SERIES SIZE HARDWARE MM.050" Rugged Metal I/O Connector (MM
More information3M MetPak 2-FB Socket
M MetPak 2-FB Socket End-to-end stackable Offset dual-beam contact minimizes insertion force Molded guide fingers provide integrated alignment Alignment wafer for true position Mates with MP2-P inverse
More informationDTS-HC High-Current Connectors
ROBUST DTS-HC High-Current Connectors Signal and power contacts in same housing Up to four 150 A or one 300 A high-current contacts Threaded coupling with self-locking mechanism for anti-vibration 100%
More informationFEMALE SOCKET CONNECTORS
PRODUCT DESCRIPTION The Thomas & Betts Female Socket Connectors are designed to mate with a wide variety of Male Headers in PC board applications which require repeated connection and disconnection. The
More informationsolutions HIGH DENSITY CONNECTORS Custom designed Contact arrangements
Custom designed HIGH DENSITY CONNECTORS NANO-D PITCH As the need for increased miniaturisation is becoming ever greater, AXON has developed an ultra-high density solution within the existing micro connector
More informationDistributed by: www.jameco.com 1-800-81-4242 The content and copyrights of the attached material are the property of its owner. M Four-Wall Header Low Profile, SMT Straight, Straight and Rt ngle Through-Hole
More informationPLCC Sockets Through Hole - M43 Series
Through Hole - M43 Series PART NUMBER LEGEND M43X-XX-XX NUMBER OF CONTACTS 20, 28, 32, 44, 52, 68, 84, 100 (-10 Style) 44, 52, 68, 84 (-11 Style) STYLE -10 Standard wall thickness, through hole -11 Thin
More informationGORE SMT EMI Gaskets and Grounding Pads
GORE SMT EMI Gaskets and Design Guide SMT EMI Gaskets and GORE Introduction GORE SMT EMI Gaskets and, Supersoft Series solves many grounding and shielding challenges in automotive electronics by delivering
More informationD*M High Density 104 Contacts 90 Bent PCB Terminations
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with ot without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationGORE SMT EMI Gaskets and Grounding Pads
GORE SMT EMI Gaskets and Design Guide SMT EMI Gaskets and GORE Introduction GORE SMT EMI Gaskets and, Supersoft Series solves many grounding and shielding challenges in automotive electronics by delivering
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Low-Inductance X5R / X7R
Product Specification November 21, 2016 V.1 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS - X5R / X7R 6.3 V TO 50 V 10 nf to 1 uf RoHS compliant & Halogen Free 2 SCOPE This specification describes
More informationOverview. Benefits. Applications. Tantalum Through-Hole Capacitors Molded Radial T330 Molded Radial
Overview The KEMET T330 polar-type, radial lead, rectangular Precision Molded Tantalum (PMT) capacitors are primarily designed for applications that demand full use of the premium space available in printed
More informationHigh Reliability Hyperboloid Contacts
High Reliability Hyperboloid Contacts ICO SERIES TM Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate TM Contacts are high quality, high reliability hyperboloid TM contacts
More informationAmphenol Fast Connector
Amphenol The Winning Connection Amphenol Fast Connector For all your Autosport connector requirements Fast Connector Series For Autosport Applications Contact Arrangement Amphenol have developed the FAST
More informationSPECIFICATION FOR THHN/THWN-2/THW/THWN/TW ARROW ROUTE, FONTANA CA
SPECIFICATION FOR THHN/THWN-2/THW/THWN/TW THHN/THWN-2/THW/THWN/TW Listed E-492385 / E-472248 APPLICATIONS THHN/THWN-2 building wire is primarily used for general purpose applications in conduit and cable
More information3M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug
M Shielded Compact Ribbon (SCR) Connectors Boardmount Right Angle Plug 61 Series Robust ribbon style contact for reliable, repetitive plugging Body tabs provide lateral support to solder joints and help
More information2.54mm Pitch Board to Cable Connector
2.54mm Pitch Board to Cable Connector FRC5 Series Conforming Standard MIL-DTL-8353 FETURE UL pproved (File No. E72124) Conform to MIL-DTL-8353 Polarizing key prevents from mis-mating. SPECIFICTIONS Rated
More informationSSL Series 1.2 IP X8 waterproof solution. Product Data Sheet. REV. 0, 2014 August
SSL Series 1.2 IP X8 waterproof solution Product Data Sheet REV. 0, 2014 August General Specification Number of Positions Current Rating Wire Information Voltage Rating Dielectric Withstand Voltage Durability
More informationApplications R41 3 I M1 M
R41, Class Y2, 300 VAC, 110 C (Automotive Grade) Overview The R41 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements
More informationRJ Vista. EMI Quiet. Right Angle. Top Entry
www.rjvista.com Contents Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
More informationMar11 Rev D
Product Specification 108-1836 11Mar11 Rev D 3 mm Micro MATE-N-LOK* Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the 3 mm Micro MATE-N- LOK*
More informationFeb12 Rev D
Product Specification AMPSEAL* Connectors 108-1329 01Feb12 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for AMPSEAL* connectors. 1.2. Qualification
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: USB3.1 Connector Product Specification GSB4X series A / B type, Receptacle, Thru hole, PCB mount Revisions Control Rev.
More informationORDERING INFORMATION: P/N K S 5 E U x CAT. 5e TOOLLESS RJ45 KEYSTONE JACKS (UNSHIELDED) P111
CAT. 5e TOOLLESS RJ45 KEYSTONE JACKS (UNSHIELDED) Insulation Resistance: 500M ohms (min.) Contact Resistance: 20m ohms (max.) Current Rating: 1.5 Amps. DC Resistance: 0.1 ohm (max.) Withstanding Voltage:
More informationOCT 16 Rev A
Product Specification 108-151041 10 OCT 16 Rev A Jiffy Splice System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Jiffy Splice
More informationDATA SHEET Metal Element Current Sensing Chip Resistor CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor 0.5% TO 5%, TCR ±25 TO ±450 SIZE: 1206/2010/2512/2725/2728/4527/4527S RoHs Compliant 14 October, 2016 V.4 DS-ENG-007 23 Page: 2 of 1. SCOPE 1.1 This
More informationApplications R46 K I P0 M
Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material that meets the requirements of UL 94 V 0. Applications For worldwide
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 7
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Title: Part Number: Description: Micro SD Card Connectors Product Specification GTFP08 SERIES Micro SD Card Connectors push-push type Revisions Control
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 ACCESSORIES Introduction Technical Reference Accessories Pressure Viewport Isolator Thermocouple Coaxial Multipin Connector Feedthrough Description Accessories is the product classification given by
More informationWill accommodate up to 35 conductors while maintaining separation required to withstand instrumentation voltages
H.0 Accessories Introduction Description Accessories is the product classification given by CeramTec for miscellaneous hardware that is used to connect, terminate, install, or isolate Ceramaseal products.
More informationRecommended Land Pattern: [mm] Dimensions: [mm] Pattern Properties: Article Properties: 0.50mm SMT ZIF Vertical Type A WR-FPC
Dimensions: [mm] Recommended Land Pattern: [mm] 1,3 ±0.15 1 2 0,20 ±0.05 0,50 ±0.15 L ±0.15 Pl ±0.10 4,50 End Cap 2 ±0.15 3,4 ±0.15 Cap h 0.13 3,50 3,5 ±0.15 4,3 ±0.20 1,50 ±0,15 0,50 ±0,15 2 pl ±0,10
More informationSMB. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
SMB Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
More informationQualification Test Report VAL-U-LOK* Connectors
Qualification Test Report VAL-U-LOK* Connectors 501-534 09Apr09 Rev A 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on VAL-U-LOK* Connectors to determine their conformance to the requirements
More informationShielded SMD Power Inductor
Features -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface mounting Applications
More informationCHIP TECHNOLOGIES INC. Chip Resistor Specification
CHIP TECHNOLOGIES INC. Chip Resistor Specification Utech Electronics 1-5250 Finch Ave. East Scarborough, Ontario Canada, M1S 5A4 1-800-268-8832 www.utech.ca 1 1.0 SCOPE... 3 2.0 Part Number Designation.
More informationDimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6. Pattern Properties: Article Properties:
Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6 1 End 2,2 1 End 2,6 1,0 ±0,05 L ±0,15 L2 ±0,1 Pl ±0,1 h 0,13 0,35 ±0,05 3,00 ±0,15 1,7 General tolerance ±0,05 Pl Pl 1,7 1,7 ±0,25 7,1
More informationMQEC Metal Alloy Low Resistance Resistor Specifications LR4527/5W
1. Scope: 1.1 This specification is for LR4527 (5.0W) product only. 2. Product Features: 2.1 Proprietary processing technique produces extremely low Resistance values. 2.2 Ultra Low and stable T.C.R. (
More informationMQ Series Medical Grade MLCC General Specifications
General Specifications GENERAL DESCRIPTION AVX offers a wide variety of medically qualified passive components. Medical devices require the utmost reliability with respect to the components incorporated
More information