Circular Connectors for Audio Equipment

Size: px

Start display at page:

Download "Circular Connectors for Audio Equipment"

Blanche Loreen Gregory
6 years ago
Views:

1 Circular Connectors for Audio Equipment HA Series Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Product Specifications Ratings Features Rated voltage Rated current 5A A (PCB dip type) AC0V, DC80V 4 5A 5 4A.Circular connectors with lock mechanism for audio equipment Additional grounding feature prevents external noise. This series includes four different receptacle sizes and two types of cable clamping mechanisms used on the plugs. Receptacle selection will depend on your particular design and available mounting space. Operation temperature range Storage temperature range -5 to to +60 Items Specifi cations Conditions. Contact resistance. Insulation resistance. Withstanding voltage 4. Vibration resistance 5.Shock resistance 6. Mating Cycles and 4 : 5 mø max. (PCB dip type), 5 : 0 mø min. Measured at DC A,000 Mø min. Measured at DC 500 V No fl ashover or dielectric breakdown. No electrical discontinuity for 0 µs or greater No electrical discontinuity for 0 µs or greater and 4 : a maximum of 0 mø (PCB dip style) 5 : 0 mø max. 7. Temperature cycle Insulation resistance:,000 Mø max. 8. Moisture resistance Insulation resistance: 0 Mø (at high humidity) min. 00 Mø (when dry) min. AC,400 V for one minute 0 to 55 Hz/cycle, amplitude: 0.75 mm, in axis directions, for hours each direction Acceleration: 490 m/s, duration: ms, axis directions, cycles each direction,000 times -55 C: 0 minutes Normal temperature: 0 to 5 minutes 85 C: 0 minutes Normal temperature: 0 to 5 minutes, left for 5 cycles Temperature: 40 C, relative humidity: 90 to 95%, left for 96 hours Materials Parts Material Finish Remarks Shell Aluminum alloy or zinc alloy Matte fi nished, nickel plating Insulator Polyamide resin or PBT resin UL94V-0 Contact Copper alloy Silver plating 04.w

2 Ordering information Plug and receptacle HA 6 PR N - SF - A (**) q w e r t y u i o qmodel name: HA Series wshell size: Shell size is the outer diameter of the mating interface of the plug. Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. econnector shape: P: Plug R: Receptacle PR: Plug receptacle J: Jack rshell variation: A, B, C, etc. is used to note exterior shell changes. tnumber of ycontact form: P: Male contact S: Female contact u Contact termination method or shape: A, B, C, etc. is used to note any changes to the termination method or type. igang type: Notes a ganged arrangement of receptacles. oother specifi cations: A two-digit number is added to indicate other specifi cations.

3 Plug Guide key B Ø9 Ø6 ØA ØA B Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Jack HA6PA-S(7) HA6P-4S(7) HA6JA-P(76) HA6PA-S(7) HA6PK-4S(7) A B HA6P-S(7) HA6P-4S(7) HA6P-5S(7) Ø9 Guide Notch Ø9 ØA HA6JA-P(76) Ø5. Ø 7 47 Ø9 Ø5. HA6J-4P(76) HA6J-P(76) HA6J-4P(76) HA6J-5P(76)

4 HA Series Circular Connectors for Audio Equipment Receptacle (Solder Type) (Large Flange Type).5 Guide Notch 7 9 Ground lug Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HA6R-P(76) (Medium Flange Type) HA6RD-P(76) (Small Flange Type) HA6RA-P(76) HA6R-P(76) HA6RD-P(76) HA6RD-4P(76) Ground lug HA6RA-P(76) HA6RA-4P(76) HA6RA-5P(76) Ground lug Receptacle (Solder Type) (Inside Mount Type) Ground lug.4 Ø.5.5 M HA6RM-P(76) HA6RM-P(76)

5 HA Series Circular Connectors for Audio Equipment Receptacle (PCB Through Hole Type) (Inside Mount Type, Straight Dip) Ø0.8.4 Ø.5.5 M (Ground) Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HA6RM-PE(76) (Inside Mount Type, Right Angle Dip) HA6RM-PB(76) Plug-Receptacle (Solder Type) (Small Flange Type) HA6PRH-S HA6PRK-4S (The above shapes are examples. The left bend type is shown in this fi gure.) Weight Remarks HA6RM-PE(76) M A HA6RM-PB(76). Dip post down bent HA6RM-PD(76) 5.8 Dip post left bent HA6PRH-S HA6PRH-4S HA6PRH-5S HA6PRK-S HA6PRK-4S Ø A Ø (Ground) Ground lug Without ground lug With ground lug Plug-Receptacle (Solder Type) (Inside Mount Type) Ø.5.5 M Ground lug HA6PRM-S(05) HA6PRM-S(05)

6 HA Series Circular Connectors for Audio Equipment Plug-Receptacle (PCB Through Hole Type) (Inside Mount Type, Straight Dip) (Ground) M Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HA6PRM-SE(7) (Inside Mount Type, Right Angle Dip) HA6PRM-SB(7) Gang Type (Plug-Receptacle Solder Type) HA6PRM-SE(7) M (Ground) HA6PRM-SB(7) 8 Dip post down bent 8 Ø.6Hole Ø(Hole) Side face hole HA6PRN-SF-A(7) HA6PRN-SF-A(7) 80 4 chain type 6

(Plug-Receptacle PCB Through Hole Type) 4 ØHole.8 4 4.8.4 8 Ø.6Hole 8 88 Convex Portion Height 0.5.6.Side face hole HA6PRN-SE-A(7) Dip post down bent type Panel Cutout Receptacle (Large Flange Type) 6.

7 (Plug-Receptacle PCB Through Hole Type) 4 ØHole Ø.6Hole 8 88 Convex Portion Height Side face hole HA6PRN-SE-A(7) Dip post down bent type Panel Cutout Receptacle (Large Flange Type) 6.95 Ø9.5 6 Ø9.5 (Small Flange Type) Ø. Ø HA6PRN-SE-A(7) 68 4 chain type (Middle Flange Type) HA6RM.6 Ø 8 Ø.7 Ø.8 Ø.8 Plug Receptacle Type (Small Flange Type) 9 (Inside Mount Type) 5 4 Ø..6 Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Ø.7 Ø.8 Ø.8 8 HA6PRM 7

8 Panel Cutout Gang Type (Plug-Receptacle) Ø Ø.5.5 Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Receptacle Dip Post Layout (The figure below shows the board surface in which connector terminal dip posts are to be inserted.) Dip post down bent type HA6RM-PB(76) Ø.(Ground) Ø.96 Dip post left bent type HA6RM-PD(76) Plug-Receptacle Dip Post Layout Ø.54 Ø. (Ground) Ø.(Ground) Dip post straight type (As viewed from the mating surface) HA6RM-PE(76) Ø. Ground M (The figure below shows the board surface in which connector terminal dip posts are to be inserted.) Dip post down bent type HA6PRM-SB(7) Ø Dip post straight type (As viewed from the mating surface) HA6PRM-SE(7) Ø. Ground HA6PRN-SE-A(7) 6 4 Ø. (Ground) M Ø Mounting hole (5 places) Ø 8

9 Coupling Combination Female Pin Male Pin (Plug) (Receptacle) Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (Plug-Receptacle) Termination procedure Plug side (HA6 type, jack side connector follows the same assembly procedure) Plug shell unit Metal clamper mm approx. Screw Body (Jack) Cable end(ref.) mm mm Operation procedure. Please choose a cable of which the outside diameter is 4-6mm.. Strip insulation of the cable end in the size as shown above.. Solder the cable to plug shell. 4. Crimp cable clamper, which holds cable, with a tool. 5. Fit the P shell unit to the cord tube, and tighten the locking screw with a Torque of N-m(.5-4kg-cm) to complete the work. For details, contact our sales or engineering department before using the model HA6 plugs. Receptacle side Precautions If heat shrink tubing is applied to the solder terminating section for insulation purposes, overheating could reduce the torque of the screw tightness. Such overheating may result in loosening and possible loss of the screw. It is advised to confirm that a minimum torque of at least 0. N m is obtained after termination. If a torque of at least 0. N m is not realized, the screw should be tightened to between 0. and 0.4 N m. Screw For details on usage, please contact our Sales or Engineering Department. 9

10 Terminal arrangement and major specifications Terminal arrangement 4 Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 4 Withstanding voltage AC,400V a minute AC,400V a minute Current rating 5A A(Board dip type) 5A Insulation resistance,000mø MIN.,000 Mø MIN. Contact resistance 5 mø MAX. 0 mø MAX. 5 mø MAX. Terminal arrangement 5 Withstanding voltage AC,400V a minute Current rating 4A Insulation resistance,000 Mø MIN. Contact resistance 0 mø MAX. Note. The above fi gures show the receptacle as viewed from the mating side.. The withstand voltages show test voltages.. The insulation resistances show the values at 500V DC. 4. The contact resistance show the values at A DC

12 Powered by TCPDF ( HA Series Circular Connectors for Audio Equipment USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 688 Westhills Court, Simi Valley, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 55 Scott Boulevard, Building 7, Suite 0 Santa Clara, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE 580 Waters Edge Lane, Suite 05 Lombard IL 6048 Phone : Mail : inquiries@hirose.com Apr..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 7677 Professional Center Drive, Suite #00C Livonia, MI 4854 Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE Muggenhofer Str Nuernberg Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A00, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 0005 Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 0 8F, No.87, Zhengzhou Rd., Taipei Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.59, Regus-Green Boulevard, Level5, Tower C, Sec6, Plot B-9A, Block B, Noida, 00, Uttar Pradesh, India Phone : Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 0 CC Amsterdam Z-O Phone : Fax : UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-, 9/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 500 Shen Nan Dong Road, Shenzhen City, Guangdong Province, Phone : Fax : KOREA: HIROSE KOREA CO., LTD. 6-0, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,74 Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No.0, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore Karnataka, India Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-7760 Ostfildern (Scharnhauser Park) Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 60, Henderson Metropolitan, NO.00, East Nanjing Road, Huangpu District, Shanghai, China 0000 Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 00, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 0 Anson Road #6-, International Plaza 07990, Singapore Phone : Fax : MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. (REPRESENTATIVE OFFICE) -0-07, Penang Cybercity (64),Lintang Mayang Pasir,950, Bayan Baru, Penang, Malaysia. Phone : Fax : ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of /04. Contents are subject to change without notice for the purpose of improvements.

High Speed Transmission, 0.8 mm Pitch Connectors for PCB Connections

High Speed Transmission, 0.8 mm Pitch Connectors for PCB Connections High Speed Transmission,.8 mm Pitch Connectors for PCB Connections FX18 Series High speed transmission characteristics ICR Insertion-loss-to-Crosstalk-Ratio Enough margin with regulated ICR data of IEEE82.3ap