T.O. COPING T.O. COPING SECOND FLOOR FIRST FLOOR ELEV.= 0'-0" 6 T.O. COPING FIRST FLOOR ELEV.= 0'-0"

Transcription

1 ELEV.= ±8'-0" ELEV.= ±'-" SECOND FLOOR ELEV.= ±'-0" ELEV.= ±5'-8" SECOND FLOOR ELEV.= ±'-0" E ELEV.= ±'-0" CHEVROLET EXISTING EAST ELEVATION /8" = '-0" PADDOCK Goodwrench Service Plus SERVICE SERVICE QUICK LUBE QUICK LUBE EXISTING SOUTH ELEVATION /8" = '-0" 9 8 EXISTING WEST ELEVATION /8" = '-0" ELEV.= ±8'-0" SECOND FLOOR ELEV.= ±'-0" ELEV.= ±8'-0" SECOND FLOOR ELEV.= ±'-0" 9 ELEV.= ±'-0". REMOVE ALL EXISTING SIGNAGE IN AREA OF WORK, TURN OVER TO OWNER.. REMOVE EXISTING ACCENT LIGHTING, REMOVE WIRING BACK TO SOURCE.. REMOVE EXISTING EIFS SYSTEM AS SHOWN, PREPARE AREA TO RECEIVE NEW FINISHES.. REMOVE PORTION OF EXISTING GLAZING AS NEW CONSTRUCTION, PREPARE AREA TO RECEIVE NEW CONSTRUCTION. 5. REMOVE EXISTING PYLON SIGN, COORDINATE POSSIBLE REUSE OF EXISTING PYLON SIGN FOUNDATION WITH SIGNAGE CONTRACTOR.. EXISTING EIFS, PATCH AND REPAIR AS INSTALLATION OF NEW FINISHES.. EXISTING GLAZING. 8. EXISTING DOOR. 9. EXISTING OVERHEAD DOOR.. EXISTING ALUMINUM COPING.. EXISTING CHAIN-LINK GARBAGE ENCLOSURE.. EXISTING GAS METER. X DEMOLITION NOTES. EXISTING PAINTED CMU, PATCH AND REPAIR AS INSTALLATION OF NEW FINISHES. AD-0 AD-0 ELEV.= ±'-0" ELEV.= ±'-0" ELEV.= ±8'-0" ELEV.= ±'-" SECOND FLOOR ELEV.= ±'-0" A AD-0 Delaware Ave. Kenmore, NY DEMOLITION A EXISTING NORTH ELEVATION /8" = '-0" KEY PLAN Scale: NTS E- AD AD-0

2 A AS- Delaware Ave. Kenmore, NY OVERALL SITE PLAN OVERALL SITE PLAN A SCALE: : AS-

3 SOMERTON AVENUE NEW ACM PANELS ABOVE DEALER SIGN ABOVE PER (" HIGH) EXISTING BUILDING LINE.08' TO PROPERTY LINE SALES ENTRY ELEMENT PER (0' WIDE x ' HIGH) '-0" 0'-0" 8'-0" '-8" EXISTING SIDEWALK NEW GMDI ENTRY ELEMENT TO EDGE OF CANOPY '-0" '-0" NEW ACM PANELS ABOVE EXISTING PADDOCK CHEVROLET PYLON SIGN PER DELAWARE AVENUE EXISTING PARKING LOT SERVICE SERVICE SIGN ABOVE PER (" HIGH) NEW ACM PANELS ABOVE NORTH END AVENUE Delaware Ave. Kenmore, NY ARCHITECTURAL SITE PLAN A ARCHITECTURAL SITE PLAN SCALE: /" = '-0" AS-

4 PLAN SCALE: /8" = '-0" A A- A A-50 A5 A- REMOVE EXISTING PARTITION WALL. PATCH ADJACENT SURFACES DAMAGED BY REMOVALS TO ALLOW FOR NEW CONSTRUCTION. NEW GLASS WALL TO MATCH EXISTING, PROVIDE BREAK METAL TO CAP END OF EXISTING WALL, REMOVE EXISTING DOOR, DOOR FRAME AND ASSOCIATED HARDWARE. NEW GLASS DOOR TO MATCH EXISTING, HEIGHT TO MATCH EXISTING FIELD VERIFY B5 CLEAR ANODIZED ALUM. CHANNEL AT HEAD TO MATCH EXISTING, SECTION AT PARTITION / GLASS SCALE: -/" = '-0" ALUM. CONNECTOR TO MATCH EXISTING, B PROVIDE BREAK METAL TO CAP END OF EXISTING WALL, B5 EXISTING PARTITION CLEAR ANODIZED ALUM. END CAP " TEMPERED GLASS EXISTING PARTITION - DRYWALL B SCALE: -/" = '-0" BASE SECTION AT BASE AT PARTITION METAL TRIM TO MATCH EXISTING, ALUM. END CAP - CLEAR ANODIZED " TEMPERED GLASS ALUM. BASE NEW /" TEMPERED GLASS WALL TO MATCH EXISTING, DOOR HARDWARE TO MATCH EXISTING, METAL KICK PLATE TO MATCH EXISTING, Delaware Ave. Kenmore, NY PLAN A ENLARGED PLAN SCALE: /" = '-0" LOCK, A5 INTERIOR ELEVATION SCALE: /8" = '-0" NEW GLASS DOOR TO MATCH EXISTING, FIELD VERIFY NEW GLASS DOOR TO MATCH EXISTING, PROVIDE TOP AND BOTTOM TO MATCH EXISTING ALL ALUM. TO BE CLEAR ANODIZED TO MATCH EXISTING A-

5 '-0" '-0" DEALER SIGN PER (" HIGH) PAINT (EP) EXISTING GLAZING () E ACM FASCIA (ACM) EAST ELEVATION /8" = '-0" SOUTH ELEVATION /8" = '-0" WEST ELEVATION /8" = '-0" ACM ACCENT BAND (ACM) ACM ENTRY (ACM) '-0" PAINT (EP) PAINT (EP) ENTRY ELEMENT PER (0' WIDE x ' HIGH) C5 A-0 GLAZING (GL) ACM FASCIA (ACM) ENTRY ELEMENT PER (0' WIDE x ' HIGH) 0'-0" PAINT (EP) ACM CANOPY (ACM) ACM FRAME (ACM) ACM ACCENT BAND (ACM) '-0" ALIGN FINISH SURFACE () ACM FRAME (ACM) A-50 PAINT (EP) PAINT (EP) PAINT (EP) ACM FASCIA (ACM) EXISTING GLAZING () PAINT (EP) EXISTING GLAZING () PAINT (EP) ACM ACCENT BAND (ACM) PAINT (EP) PAINT (EP) PAINT (EP) PAINT (EP) ALIGN FINISH SURFACE () ACM ACCENT BAND (ACM) ACM FASCIA (ACM) EXISTING GLAZING () ENTRY ELEMENT PER (0' WIDE x ' HIGH) C5 A-0 PAINT (EP) PAINT (EP) PAINT (EP) PAINT (EP) PAINT (EP) EXISTING GLAZING () SERVICE SIGN PER (" HIGH) ACM FASCIA (ACM) FINISH SCHEDULE NO. LOCATION COLOR & MATERIAL SPECIFICATIONS DESCRIPTIONS MANUFACTURER/ SUPPLIER ACM ACM ACM EP EP AT MAIN SHOWROOM STRUCTURE ENTRY ELEMENT ENTRY ELEMENT SERVICE BUILDING STRUCTURE AND ANY OTHER BUILDING EXCEPT MAIN SHOWROOM S AT MAIN SHOWROOM STRUCTURE PAINT TO MATCH ACM- ALPOLIC, TBX, BRIGHT ALUMINUM METALLIC ALPOLIC, CVB BLUE, COLOR TO MATCH PMS 00 CHEVROLET BLUE ALPOLIC, DM HLZ ALUMINUM, BRUSHED HAIRLINE ALUMINUM BENJAMIN MOORE, OC-, WHITE DIAMOND BENJAMIN MOORE, -0, SILVER HALF DOLLAR PAINT (EP) A-0 C A-0 ALUMINUM COMPOSITE MATERIAL ALUMINUM COMPOSITE MATERIAL ALUMINUM COMPOSITE MATERIAL GRADE PAINT GRADE PAINT A-0 ALPOLIC OR EQUAL, DAVE KEARNEY 5-8-5, ALT. SOURCE: ALUCOBOND, ALCOA ALPOLIC OR EQUAL, DAVE KEARNEY 5-8-5, ALT. SOURCE: ALUCOBOND, ALCOA ALPOLIC OR EQUAL, DAVE KEARNEY 5-8-5, ALT. SOURCE: ALUCOBOND, ALCOA LOCAL BENJAMIN MOORE PAINT SUPPLY STORE LOCAL BENJAMIN MOORE PAINT SUPPLY STORE A-0 A A-0 Delaware Ave. Kenmore, NY PAINT (EP) EXISTING GLAZING () PAINT (EP) PAINT (EP) PAINT (EP) A NORTH ELEVATION /8" = '-0" KEY PLAN Scale: NTS E- A A-0

6 F.R.T. BLOCKING REMOVE EXISTING METAL COPING, PREPARE SURFACE TO RECEIVE NEW FINISHES () TOP OF PARAPET ±'-" ABOVE MAIN F.F. " REVEAL () PANEL - ACM () () " REVEAL () SHEATHING () REMOVE EXISTING EIFS SYSTEM, PREPARE SURFACE TO RECEIVE NEW FINISHES () " REVEAL () PANEL - ACM () () " REVEAL () PANEL - ACM () DRIP EDGE () MAIN FINISH FLOOR +0'-0" EXIST. FOUNDATION WALL SECTION SCALE: /" = '-0" D A-50 PROVIDE NEW EPDM MEMBRANE ROOF SYSTEM PER MANUF. SPECS. (CONTINUE UP AND OVER PARAPET) AS REQUIRED BY NEW CONSTRUCTION EXIST. ROOF CONSTRUCTION INSTALLATION () EXIST. CMU WALL INSTALLATION () E A-50 F.R.T. BLOCKING REMOVE EXISTING METAL COPING, PREPARE SURFACE TO RECEIVE NEW FINISHES () TOP OF PARAPET ±'-" ABOVE MAIN F.F. " REVEAL () PANEL - ACM () () EXIST. CMU WALL " REVEAL () SHEATHING () REMOVE EXISTING EIFS SYSTEM, PREPARE SURFACE TO RECEIVE NEW FINISHES () PROVIDE BLOCKING FOR SIGNAGE AS REQUIRED () EXIST. MASONRY OPENING ±'-0" ABOVE MAIN F.F. PANEL, ADHERE TO EXISTING OPENING - ACM () EXISTING OVERHEAD DOOR C MAIN FINISH FLOOR +0'-0" EXIST. FOUNDATION WALL SECTION SCALE: /" = '-0" D A-50 PROVIDE NEW EPDM MEMBRANE ROOF SYSTEM PER MANUF. SPECS. (CONTINUE UP AND OVER PARAPET) AS REQUIRED BY NEW CONSTRUCTION EXIST. ROOF CONSTRUCTION INSTALLATION () F.R.T. BLOCKING REMOVE EXISTING METAL COPING, PREPARE SURFACE TO RECEIVE NEW FINISHES () TOP OF PARAPET ±8'-0" ABOVE MAIN F.F. () REMOVE EXISTING EIFS SYSTEM, PREPARE SURFACE TO RECEIVE NEW FINISHES () EXIST. CMU WALL PANEL - ACM () PANEL - ACM () EXIST. MASONRY OPENING ±'-0" ABOVE MAIN F.F. PANEL, ADHERE TO REQUIRED - ACM () () EXISTING GLAZING () MAIN FINISH FLOOR +0'-0" C5 WALL SECTION SCALE: /" = '-0" D A-50 PROVIDE NEW EPDM MEMBRANE ROOF SYSTEM PER MANUF. SPECS. (CONTINUE UP AND OVER PARAPET) AS REQUIRED BY NEW CONSTRUCTION EXIST. ROOF CONSTRUCTION SHEATHING () INSTALLATION () Delaware Ave. Kenmore, NY WALL SECTIONS A-0

7 8 5 5 ABOVE X FLOOR PLAN NOTES: FLOOR PLAN NOTES. CLEAN AND PREPARE EXISTING FLOORING TO RECEIVE NEW FINISHES. PREPARATION SHALL BE COMPLIANT WITH MANUFACTURE OF NEW FINISH.. CLEAN AND PREPARE EXISTING CONCRETE FLOORING TO RECEIVE ASHFORD FORMULA SEALER. PREPARE PER MANUFACTURES SPECIFICATIONS. APPROVE WITH OWNER BEFORE APPLICATION OF PRODUCTS.. CLEAN AND PREPARE MILLWORK, COUNTER TOPS AND SHROUDS TO RECEIVE NEW FINISHES.. REMOVE ALL FLOOR AND WALL TILE. PATCH AND REPAIR WALLS AND PREPARE FOR NEW FINISHES. 5. RE LAMINATE ALL PLASTIC LAMINATE ON MILLWORK. FRONT FACE, CABINET, SIDES, SUPPORT AND ALL OTHER VERTICAL APPLICATIONS TO RECEIVE PL. TOE KICK/BASE TO RECEIVE PL-. COUNTER TOP/EDGE AND ALL HORIZONTAL SURFACES TO RECEIVE PL-.. REFINISH BATHROOM COUNTER TOP AND SHROUD WITH NEW COMPLIANT FINISHES. COUNTER TOP/EDGE TO RECEIVE GR-. SHROUD/SUPPORT TO RECEIVE PL-.. REFINISH COUNTER TOP AND ALL PLASTIC LAMINATE AT MILLWORK. FRONT FACE, SIDES, CABINET,SUPPORT, AND ALL OTHER VERTICAL APPLICATIONS TO RECEIVE PL-. TOE KICK/BASE TO RECEIVE PL-. COUNTER TOP/EDGE TO RECEIVE GR- 8. DOOR WINDOWS TO BE COVERED WITH BLACK VINYL FILM. 9. REMOVE EXISTING DOOR AND WALL AS SHOWN, PREPARE AREA TO RECEIVE NEW GLASS WALL AND DOOR, MATCH EXISTING SALES OFFICES.. REMOVE EXISTING GLAZING AS NEW CONSTRUCTION, PREPARE AREA TO RECEIVE NEW FINISHES.. NEW WALL : 5 8" METAL " O.C., " BATT INSULATION, 5 8" GYP. BD., FINISHES PER FINISH SCHEDULE.. PROVIDE NEW GLAZING AS REQUIRED BY NEW CONSTRUCTION, MATCH EXISTING GLAZING. GENERAL NOTES: GENERAL NOTES FURNITURE, SYSTEMS FURNISHINGS & SHELVING ARE N.I.C. FINAL EQUIPMENT LOCATIONS TO BE COORDINATED WITH OWNER PRIOR TO INSTALLATION OF ELECTRICAL, BLOCKING, ETC. PATCH AND REPAIR S AS REQUIRED BY NEW CONSTRUCTION. SEE ROOM FINISH SCHEDULE FOR ALL FINISH INFORMATION. AREA SHOWN ABOVE Delaware Ave. Kenmore, NY ENLARGED PLANS A A A ENLARGED PARTIAL FLOOR PLAN SC ALE: /" = '-0" KEY PLAN Scale: NTS A-0

8 5 ENLARGED PARTIAL FLOOR PLAN SC ALE: /" = '-0" X FLOOR PLAN NOTES: FLOOR PLAN NOTES. CLEAN AND PREPARE EXISTING FLOORING TO RECEIVE NEW FINISHES. PREPARATION SHALL BE COMPLIANT WITH MANUFACTURE OF NEW FINISH.. CLEAN AND PREPARE EXISTING CONCRETE FLOORING TO RECEIVE ASHFORD FORMULA SEALER. PREPARE PER MANUFACTURES SPECIFICATIONS. APPROVE WITH OWNER BEFORE APPLICATION OF PRODUCTS.. CLEAN AND PREPARE MILLWORK, COUNTER TOPS AND SHROUDS TO RECEIVE NEW FINISHES.. REMOVE ALL FLOOR AND WALL TILE. PATCH AND REPAIR WALLS AND PREPARE FOR NEW FINISHES. 5. RE LAMINATE ALL PLASTIC LAMINATE ON MILLWORK. FRONT FACE, CABINET, SIDES, SUPPORT AND ALL OTHER VERTICAL APPLICATIONS TO RECEIVE PL. TOE KICK/BASE TO RECEIVE PL-. COUNTER TOP/EDGE AND ALL HORIZONTAL SURFACES TO RECEIVE PL-.. REFINISH BATHROOM COUNTER TOP AND SHROUD WITH NEW COMPLIANT FINISHES. COUNTER TOP/EDGE TO RECEIVE GR-. SHROUD/SUPPORT TO RECEIVE PL-.. REFINISH COUNTER TOP AND ALL PLASTIC LAMINATE AT MILLWORK. FRONT FACE, SIDES, CABINET,SUPPORT, AND ALL OTHER VERTICAL APPLICATIONS TO RECEIVE PL-. TOE KICK/BASE TO RECEIVE PL-. COUNTER TOP/EDGE TO RECEIVE GR- GENERAL NOTES: GENERAL NOTES FURNITURE, SYSTEMS FURNISHINGS & SHELVING ARE N.I.C. FINAL EQUIPMENT LOCATIONS TO BE COORDINATED WITH OWNER PRIOR TO INSTALLATION OF ELECTRICAL, BLOCKING, ETC. PATCH AND REPAIR S AS REQUIRED BY NEW CONSTRUCTION. SEE ROOM FINISH SCHEDULE FOR ALL FINISH INFORMATION. AREA SHOWN ABOVE Delaware Ave. Kenmore, NY ENLARGED PLANS 8. DOOR WINDOWS TO BE COVERED WITH BLACK VINYL FILM. 9. REMOVE EXISTING DOOR AND WALL AS SHOWN, PREPARE AREA TO RECEIVE NEW GLASS WALL AND DOOR, MATCH EXISTING SALES OFFICES.. REMOVE EXISTING GLAZING AS NEW CONSTRUCTION, PREPARE AREA TO RECEIVE NEW FINISHES.. NEW WALL : 5 8" METAL " O.C., " BATT INSULATION, 5 8" GYP. BD., FINISHES PER FINISH SCHEDULE.. PROVIDE NEW GLAZING AS REQUIRED BY NEW CONSTRUCTION, MATCH EXISTING GLAZING. KEY PLAN Scale: NTS A-0

9 ACM PANEL, FINISH PER INSTALLATION () 8" F.R.T. TREATED SHEATHING () A A-50 '-0".08' TO PROPERTY LINE E D PNL REF. " PNL REF. " VERTICAL PANEL JOINT DETAIL SCALE: " = '-0" INSTALLATION () " PNL. REF. " ALIGN SURFACE WITH EXISTING EIFS SYSTEM () SHEATHING () INSTALLATION () PNL. REF. PANEL OUTSIDE PANEL DETAIL SCALE: " = '-0" '-0" '-0" TO EDGE OF CANOPY '-" '-" '-0" " " '-8" A A-50 ENTRY ELEMENT FRONT ELEVATION SCALE: /" = '-0" '-0" 5'-0" 8" '-" '-" 0'-0" " 8'-0" EQ.PANELS '-0" SHEATHING () " C5 A-50 " PNL. REF. PNL. REF. ACM PANEL, FINISH PER PROVIDE () GRADE RECESSED DOWNLIGHTS, CONNECT TO EXISTING LIGHTING CIRCUITS AS REQUIRED. '-8" '-8" EDGE OF CANOPY ABOVE PNL REF. PNL REF. " " ACM PANEL, FINISH PER INSTALLATION () SHEATHING () '-8" '-8" '-8" 0'-0" PROPERTY LINE E '-0" ALIGN SURFACE WITH EXISTING EIFS SYSTEM () SHEATHING () INSTALLATION () HORIZONTAL PANEL JOINT DETAIL SCALE: " = '-0" '-0" '-" '-" 8" D " " PNL. REF. PANEL PARAPET DETAIL SCALE: " = '-0" 5'-0" A A-50 '-0" '-8" " '-0" " " '-" '-" SLOPE '-8" ALIGN SURFACE WITH EXISTING EIFS SYSTEM () WEEP HOLE FIELD DRILL () PER PANEL () DRIP EDGE () SHEATHING () PROPERTY LINE " '-0" " " D A-50 E '-0" CANOPY " INSTALLATION () PANEL BASE CONDITION DETAIL SCALE: " = '-0" MECHANICAL FASTEN ACM PANEL TO CONSTRUCTION () PROVIDE NEW EPDM MEMBRANE ROOF SYSTEM PER MANUF. SPECS. (CONTINUE UP AND OVER PARAPET) AS REQUIRED BY NEW CONSTRUCTION () '-0" '- " '- " 8'-" '-0" METAL CANOPY CONSTRUCTION W/ 5 8" F.R.T. TREATED SHEATHING () TREATED WOOD REQUIRED () ACM PANEL, FINISH PER STEEL PER CANOPY SECTION D E () () PROVIDE NEW EPDM MEMBRANE ROOF SYSTEM PER MANUF. SPECS. (CONTINUE UP AND OVER PARAPET) AS REQUIRED BY NEW CONSTRUCTION () 5 8" METAL " O.C. () PROVIDE NEW EPDM MEMBRANE ROOF SYSTEM PER MANUF. SPECS. AS REQUIRED BY NEW CONSTRUCTION () 5 8" METAL " O.C. () " METAL " O.C. '-0" " " CAN VARY. PANEL SOFFIT DETAIL SCALE: " = '-0" CANOPY SECTION SCALE: " = '-0" NOTE: ALL WOOD BLOCKING AND PLYWOOD/ SHEATHING SHALL BE TREATED. 5 8" METAL STUDS " O.C. () '-8" " " SHEATHING. () " PANEL REFERENCE '-0" " " SLOPE SLOPE SHEATHING () '- " '-" ACM PANEL, FINISH PER ACM PANEL (ACM) '-0" CANOPY PROPERTY LINE ACM PANEL (ACM) SLOPE ACM PANEL (ACM) ACM PANEL BEYOND (ACM) TREATED WOOD PLUMB AND SQUARE INSTALLATION () ALIGN SURFACE WITH EXISTING EIFS SYSTEM () 5 8" METAL " O.C. () " ACM PANEL SYSTEM (ACM) " SHEATHING () LAYER 5 8" F.R.T. TREATED SHEATHING W/ " REQUIRED, 8" TOTAL THICKNESS. SHEATHING () " ACM PANEL SYSTEM (ACM) '-0" ±'- 8 " '-5 8 " 8" 8'-" C5 '-0" E5 () ACM PANEL (ACM) " METAL " O.C. () ACM PANEL (ACM) '-8" LAYER 5 8" F.R.T. TREATED SHEATHING W/ /" REQUIRED, 8" TOTAL THICKNESS. () " PANEL ABUTMENT DETAIL SCALE: " = '-0" NEW 5 8" METAL STUD WALL, 5 8" GYP. BD., " BATT INSULATION, FINISH TO MATCH NEW FINISHES. EXISTING GLAZING '-0" ENTRY ELEMENT SECTION SCALE: " = '-0" HSS xx0.5 W/ " BASE & CAP, () " Ø A.B. () "Ø ANCHOR " O.C. () EXISTING SLAB, SAWCUT AS NEW CONSTRUCTION () " ACM PANEL SYSTEM (ACM) SHEATHING () NEW GLAZING, VERIFY ACTUAL WIDTH IN FIELD, MATCH EXISTING GLAZING " METAL " O.C. () SHEATHING () B5 C8x.5 C8x.5 ENTRY ELEMENT CONSTRUCTION W/ 5 8" F.R.T. TREATED SHEATHING () " HSS xx0.5 W/ " BASE & CAP, () " Ø A.B. () LAYER 5 8" F.R.T. TREATED SHEATHING W/ " REQUIRED, 8" TOTAL THICKNESS. " ACM PANEL SYSTEM (ACM) " '-0" 8" C8x.5 '-" C8x.5 C8x.5 " '-" " REMOVE EXISTING GLAZING AS NEW CONSTRUCTION () W8x8 '-0" '-" '-" '-0" CANOPY FRAMING PLAN SCALE: /8" = '-0" 8" B E PANEL INSIDE CORNER DETAIL SCALE: " = '-0" W8x8 NEW GLAZING, VERIFY ACTUAL WIDTH IN FIELD, MATCH EXISTING GLAZING C8x.5 W8x8 C8x.5 "Ø ANCHOR " O.C. () EXISTING SLAB, SAWCUT AS NEW CONSTRUCTION () '-0" CANOPY FRAMING SECTION PLAN SCALE: /8" = '-0" 5 8" METAL " O.C. () SHEATHING () " ACM PANEL SYSTEM (ACM) " METAL " O.C. SHEATHING. HSS xx0.5 W/ " BASE & CAP, () " Ø A.B. () C8x.5 BEYOND SHEATHING () 9 8 " " '- 8 " " 8" C8x.5 HSS xx0.5 W/ " BASE & CAP, () " Ø A.B. () 8" '-" '-8" PLUMB AND SQUARE INSTALLATION () HSS xx0.5 W/ " BASE & CAP, () " Ø A.B. () HSS xx0.5 W/ " BASE & CAP, () " Ø A.B. () MOMENT CONNECTION () Delaware Ave. Kenmore, NY DETAILS & NOTES A ENTRY ELEMENT SECTION SCALE: /" = '-0" A-50 A SCALE: /" = '-0".08' PROPERTY LINE ENTRY ELEMENT SIDE ELEVATION A ENTRY ELEMENT SECTION SCALE: /" = '-0".08' PROPERTY LINE 8" WALL () # " O.C. () () # BAR CONT. TOP & BOTTOM () A () #5 BAR () '-0" '-0" '-0" MIN. FOUNDATION COLUMNS SCALE: /8" = '-0" 8" WALL () # " O.C. () () # BAR CONT. TOP & BOTTOM () A () #5 BAR () SCALE: /8" = '-0" '-" FOUNDATION SECTION '-0" '-0" MIN A-50

10 ROOM NUMBER ROOM NAME FLOOR BASE ROOM FINISH SCHEDULE WALLS CEILING MILLWORK NORTH SOUTH EAST WEST MAT'L HEIGHT FACE OF CAB./SHRO UD SHOWROOM PT-, C- PT- P- P- P- P- EXIST EXIST FINANCE WAITING AREA PT- PT- -- P EXIST EXIST COUNTER TOP REMARKS MILLWORK TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDES AND ALL VERTICAL SURFACES OF MILLWORK. PL- FOR COUNTER TOPS/EDGE AND ALL HORIZONTAL SURFACES. PL- FOR TOE KICKS. KEY TRACK NON CUSTOMER TOUCH POINT RECEPTION PT- PT- P- P- -- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST HALLWAY PT- PT- P- P- P- P- EXIST EXIST HALLWAY PT- PT- P- P- P- P- EXIST EXIST RECEPTION DESK AND BACK COUNTER TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDES OF DESK/SUPPORT. PL- FOR COUNTER TOP/EDGE. PL- FOR TOE KICKS. COFFEE AREA TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDE OF CABINET/SUPPORT. GR- FOR COUNTER TOP/EDGE. PL- FOR TOE KICK AT CABINETS CLOSET NON CUSTOMER TOUCH POINT MEN'S ROOM PT- PT- P- P- P- PT- EXIST EXIST PL- GR- 8 WOMEN'S ROOM PT- PT- P- P- PT- P- EXIST EXIST PL- GR- BATHROOM COUNTER/SHROUD TO RECEIVE NEW FINISHES. GR- FOR COUNTER TOP/EDGE. PL- FOR SHROUD/ALL SUPPORT BATHROOM COUNTER/SHROUD TO RECEIVE NEW FINISHES. GR- FOR COUNTER TOP/EDGE. PL- FOR SHROUD/ALL SUPPORT 9 RETAIL PARTS COUNTER GF- VB- P- -- P- P- EXIST EXIST STAINLESS COUNTER 0 RETAIL PARTS DISPLAY GF- VB- P- -- P- P- EXIST EXIST PL- GR- TECH PARTS COUNTER GF- -- P- P- -- P- EXIST EXIST PL- GR- PARTS GF- -- P- P- P- P- EXIST EXIST CLOSET GF- -- P- P- P- P- EXIST EXIST HALLWAY GF- -- P- P- P- P- EXIST EXIST PARTS RECEIVING GF- -- P- P- P- P- EXIST EXIST PARTS STORAGE GF- -- P- P- P- P- EXIST EXIST MEN'S ROOM PT- PT- P- PT- P- P- EXIST EXIST COUNTER TO RECEIVE NEW FINISHES. ALL HORIZONTAL SURFACES/EDGES TO RECEIVE PL-. ALL SUPPORT TO RECEIVE PL- COUNTER TO RECEIVE NEW FINISHES. ALL HORIZONTAL SURFACES/EDGES TO RECEIVE PL-. ALL SUPPORT TO RECEIVE PL- 8 CLOSET NON CUSTOMER TOUCH POINT 9 WOMEN'S ROOM PT- PT- PT- P- P- P- EXIST EXIST REFRESMENTS/ HOSPITALITY PT- PT- -- P- -- P- EXIST EXIST PL- PL- CASHIER PT- PT- -- P- P- P- EXIST EXIST PL- PL- CHILDREN'S PLAY AREA RF- VB- P- P- P- P- EXIST EXIST CUSTOMER LOUNGE PT- PT- P- P- P- P- EXIST EXIST PL- GR- LOBBY PT- PT- P- P- P- P- EXIST EXIST SERVICE MANAGERS OFFICE VCT- VB- P- P- P- P- EXIST EXIST SERVICE GF- -- P- P- P- P- EXIST EXIST STORAGE GF- -- P- P- P- P- EXIST EXIST MILLWORK TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDE OF DESK/CABINET/SUPPORT. PL- FOR COUNTER TOP/EDGE. PL- FOR TOE KICK MILLWORK TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDE OF DESK/CABINET/SUPPORT. PL- FOR COUNTER TOP/EDGE. PL- FOR TOE KICK CUSTOMER BUSINESS CENTER MILLWORK TO RECEIVE NEW FINISHES. PL- FOR FACE, BACK AND SIDES OF MILLWORK WALL AND COUNTER SUPPORT. GR- FOR COUNTER TOP/EDGE. PL- FOR TOE KICK/ BASE COLOR 8 SERVICE STALLS GF- -- P-, P-, P- P-, P-, P- P-, P-, P- P-, P-, P- EXIST EXIST SEE ELEVATION C- AI- FOR PAINT LOCATION AND SIZES () 9 TECHNICIAN LOCKER ROOM GF- -- P- P- P- P- EXIST EXIST MECHANICAL GF- -- P- P- P- P- EXIST EXIST SERVICE GF- -- P- P- P- P- EXIST EXIST MACHINE ROOM GF- -- P- P- P- P- EXIST EXIST TOOL ROOM GF- -- P- P- P- P- EXIST EXIST STORAGE GF- -- P- P- P- P- EXIST EXIST E5 ENLARGEMENT FOR FLOOR MATERIAL AT SHOWROOM PT C RF CF P SCALE: /" = '-0" FINISH SELECTIONS PORCELAIN TILE: (PT-) MFG: CROSSVILLE STYLE: CROSS-COLORS MINGLES COLOR: A85 MERCURY SIZE: " X " CUSTOM SIZE GROUT: FLEXTILE: SILVER GREY CARPET: (CPT-) MFG: INTERFACE COLLECTION: CONCRETE MIX STYLE: 80050H GROOVED COLOR: 0088 LIMESTONE SIZE: 50CM X 50CM RESILIENT FLOORING: (RF-) LINOLEUM MFG: ARMSTRONG STYLE: MARMORETTE COLOR: LP050 SILVER GREY SIZE: '-" ROLLED GOODS,.5MM THICK CONCRETE FLOORING: (CF-) CHEMICALLY PROCESSED CONCRETE SEALER MFG: ARMSTRONG STYLE: MARMORETTE COLOR: LP050 SILVER GREY SIZE: '-" ROLLED GOODS,.5MM THICK PAINT: (P-) MFG: BENJAMIN MOORE COLOR: SILVER HALF DOLLAR -0 FINISH: EGGSHELL (P-) (P-) (P-) MFG: BENJAMIN MOORE COLOR: SILVER SPRING 0-50 FINISH: EGGSHELL NOT USED PORCELAIN TILE CARPET RESILIENT FLOORING CONCRETE FLOORING PAINT VB BASE PL GR ROOM FINISH LEGEND PLASTIC LAMINATE GRANITE COMPOSITE MFG: BENJAMIN MOORE COLOR: SILVER SPRING 0-50 FINISH: EGGSHELL IN MAIN AREAS, SEMI GLOSS IN RESTROOMS GENERAL NOTES NO CHANGES OR SUBSTITUTIONS WILL BE MADE TO THE FOLLOWING FINISHES UNLESS DIRECTED BY THE OWNER OR ARCHITECT. ALL MATERIALS AND FINISHES ARE TO BE PREPARED AND INSTALLED PER MANUFACTURES SPECIFICATIONS MANY FINISH MATERIALS REQUIRE A SUBSTANTIAL LEAD TIME. IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO ORDER ALL MATERIALS AT THE APPROPRIATE TIME. ANY FEE'S INCURRED AS A RESULT OF FINISHES NOT BEING ORDERED ON TIME WILL BE THE RESPONSIBILITY OF THE CONTRACTOR. ANY AND ALL FINISH SELECTIONS/ COLORS MUST BE SUBMITTED TO ARCHITECT FOR APPROVAL ACCOUNTING FOR PROPER LEAD TIME. ANY FINISH THAT IS INSTALLED WITHOUT ARCHITECTS APPROVAL MAY BE REQUIRED TO BE REMOVED AND REPLACED BY THE GENERAL CONTRACTOR. ALL HARDWARE SHALL BE SATIN CHROME AS A STANDARD INCLUDING CABINETRY PULLS AND DOOR HARDWARE. ALL CABINETRY (DOORS AND DRAWERS) TO RECEIVE STANDARD WIRE PULL UNLESS OTHERWISE NOTED. CEILINGS: GYPSUM BOARD CEILINGS ARE TO BE PAINTED CEILING WHITE UNLESS OTHERWISE NOTED. C- PT- P- ELEVATION AT SERVICE STALL WALL () C-5 SCALE: /8"='-0" VINYL BASE: (VB-) MANUF: ARMSTRONG COLOR: - MILK PLASTIC LAMINATE: (PL-) HIGH PRESSURE WOOD GRAIN LAMINATE MFG: WILSONART STYLE: -0 KENSINGTON MAPLE (PL-) HIGH PRESSURE LAMINATE MFG: WILSONART STYLE: D8-0 FASHION GREY (PL-) NOT USED (PL-) HIGH PRESSURE LAMINATE MFG: WILSONART STYLE: D9-0 SLATE GREY GRANITE COMPOSITE: (GR-) MFG: SILESTONE COLOR: GREY EXPO SIZE: " THICK EDGE: SQUARE GENERAL NOTES ALL MECHANICAL DUCT COVERS SHALL BE PAINTED TO MATCH THE SURROUNDING WALL/ CEILING COLOR. PRIME AS NECESSARY. WALLS: PROVIDE () COAT WALL PRIMER FOLLOWED BY () COATS WALL PAINT ON ALL INTERIOR WALL SURFACES. FLOORS: PROVIDE APPROPRIATE SCHLUTER SYSTEMS, INC. NICKLE FINISH: SATIN TRANSITION STRIPS WHERE TILE AND OTHER FLOOR FINISHES MEET. PROVIDE THE ARCHITECT WITH COLOR SAMPLES. FINAL COLOR TO BE SELECTED BY ARCHITECT. BASE: PROVIDE A STRAIGHT BASE WHERE CARPET IS LOCATED UNLESS OTHERWISE NOTED ON THE DRAWINGS. WINDOWS: 5'-0" '-0" LOCATION AND DIMENSIONS OF CARPET TO BE COORDINATED WITH EXACT SIZE AND LOCATION OF CUBICAL FURNITURE. CARPET IS TO SPAN UNDERNEATH THE CUBICAL FURNITURE, REST OF SHOWROOM TO BE PT- FINISH SELECTIONS REFINISH ALL PLASTIC LAMINATE WINDOW SILLS TO THE FOLLOWING: PL-: HIGH PRESSURE WOOD GRAIN LAMINATE MANUF: WILSONART COLOR: KENSINGTON MAPLE -0 SUBMIT SAMPLE TO ARCHITECT FOR APPROVAL. '-0" '-0" TO CEILING REST OF WALL TO CEILING P- '-0" BAND OF P- FIRST '-0" TO RECIEVE P- Delaware Ave. Kenmore, NY FINISH PLAN AND SCHEDULE AI-

11 A SPACE ALLOCATION PLAN SCALE: /8" = '-0" NOTE: FURNITURE SHOWN AS REFERENCE ONLY NOT IN CONTRACT ROOM NUMBER ROOM NAME FLOOR BASE ROOM FINISH SCHEDULE WALLS CEILING MILLWORK NORTH SOUTH EAST WEST MAT'L HEIGHT FACE OF CAB./SHRO UD SHOWROOM PT-, C- PT- P- P- P- P- EXIST EXIST FINANCE WAITING AREA PT- PT- -- P EXIST EXIST COUNTER TOP REMARKS MILLWORK TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDES AND ALL VERTICAL SURFACES OF MILLWORK. PL- FOR COUNTER TOPS/EDGE AND ALL HORIZONTAL SURFACES. PL- FOR TOE KICKS. KEY TRACK NON CUSTOMER TOUCH POINT RECEPTION PT- PT- P- P- -- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST SALES MANAGER'S OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST FINANCE OFFICE C- VB- P- P- P- P- EXIST EXIST HALLWAY PT- PT- P- P- P- P- EXIST EXIST HALLWAY PT- PT- P- P- P- P- EXIST EXIST RECEPTION DESK AND BACK COUNTER TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDES OF DESK/SUPPORT. PL- FOR COUNTER TOP/EDGE. PL- FOR TOE KICKS. COFFEE AREA TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDE OF CABINET/SUPPORT. GR- FOR COUNTER TOP/EDGE. PL- FOR TOE KICK AT CABINETS CLOSET NON CUSTOMER TOUCH POINT MEN'S ROOM PT- PT- P- P- P- PT- EXIST EXIST PL- GR- 8 WOMEN'S ROOM PT- PT- P- P- PT- P- EXIST EXIST PL- GR- BATHROOM COUNTER/SHROUD TO RECEIVE NEW FINISHES. GR- FOR COUNTER TOP/EDGE. PL- FOR SHROUD/ALL SUPPORT BATHROOM COUNTER/SHROUD TO RECEIVE NEW FINISHES. GR- FOR COUNTER TOP/EDGE. PL- FOR SHROUD/ALL SUPPORT 9 RETAIL PARTS COUNTER GF- VB- P- -- P- P- EXIST EXIST STAINLESS COUNTER 0 RETAIL PARTS DISPLAY GF- VB- P- -- P- P- EXIST EXIST PL- GR- TECH PARTS COUNTER GF- -- P- P- -- P- EXIST EXIST PL- GR- PARTS GF- -- P- P- P- P- EXIST EXIST CLOSET GF- -- P- P- P- P- EXIST EXIST HALLWAY GF- -- P- P- P- P- EXIST EXIST PARTS RECEIVING GF- -- P- P- P- P- EXIST EXIST PARTS STORAGE GF- -- P- P- P- P- EXIST EXIST MEN'S ROOM PT- PT- P- PT- P- P- EXIST EXIST COUNTER TO RECEIVE NEW FINISHES. ALL HORIZONTAL SURFACES/EDGES TO RECEIVE PL-. ALL SUPPORT TO RECEIVE PL- COUNTER TO RECEIVE NEW FINISHES. ALL HORIZONTAL SURFACES/EDGES TO RECEIVE PL-. ALL SUPPORT TO RECEIVE PL- 8 CLOSET NON CUSTOMER TOUCH POINT 9 WOMEN'S ROOM PT- PT- PT- P- P- P- EXIST EXIST REFRESMENTS/ HOSPITALITY PT- PT- -- P- -- P- EXIST EXIST PL- PL- CASHIER PT- PT- -- P- P- P- EXIST EXIST PL- PL- MILLWORK TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDE OF DESK/CABINET/SUPPORT. PL- FOR COUNTER TOP/EDGE. PL- FOR TOE KICK MILLWORK TO RECEIVE NEW FINISHES. PL- FOR FACE AND SIDE OF Delaware Ave. Kenmore, NY 09 SPACE ALLOCATION PLAN 0-0- AI-