for better solutions... Product Range Our services Your solution H-BAU Technik GmbH made in Germany All product solutions at a glace
|
|
- Alexina Strickland
- 6 years ago
- Views:
Transcription
1 for better solutions... Product Range Our services Your solution H-BAU Technik GmbH made in Germany All product solutions at a glace
2 Contact Oslo Helsinki Moscow London Warsaw Kiev Paris H-BAU Bucharest Rome Madrid Ankara H-BAU Technik GmbH Am Güterbahnhof Klettgau Germany Phone +49 (0) Telefax +49 (0) Production and Delivery North-east Brandenburger Allee Nauen OT Wachow Germany Phone +49 (0) Telefax +49 (0) info.berlin@h-bau.de Production Chemnitz Beyerstraße Chemnitz Germany Phone +49 (0) Telefax +49 (0) South Paul Rieger Phone +49 (0) Telefax +49 (0) Mobile +49 (0) paul.rieger@h-bau.de North east Rudolf Till Phone +49 (0) Telefax +49 (0) Mobile +49 (0) rudolf.till@h-bau.de South West Oliver Etzrodt Phone +49 (0) Telefax +49 (0) Mobile +49 (0) oliver.etzrodt@h-bau.de 2 Product Range H-BAU Technik GmbH
3 Contents All product solutions at a glace for better solutions Contents PENTAFLEX Sealing System 5 KUNEX Joint Tapes 6 PLURAFLEX Injection Hoses 7 SWELLFLEX Waterstop Tapes 8 Surface Sealing 9 Systems FERBOX Reverse Bending Connector 10 FIBERNOX V-ROD Glass-fibre Rods 11 Stainless Steel 12 GRIPRIP Masonry 13 Shuttering RAPIDOBAT Shuttering Tubes 14 Shuttering 15 Sound Insulation Impact Noise Insulation 16 Thermal Insulation ISOPRO Thermal Insulation 80 mm 17 ISOMAXX Thermal Insulation 120 mm 18 ISOMUR Wall Base 19 Connection Systems Shear Dowels HED & JSD+ 20 UNICON Fast Connection System 21 Accessories Accessories 22 Shuttering Accessories 23 Double-Wall Transport Anchor KE 24 Product Range H-BAU Technik GmbH 3
4 H-BAU Technik GmbH for better solutions... Your solution is our objective Guided by the corporate principle "for better solutions" H-BAU Technik GmbH has set high standards in the building technolgy segment for 35 years. Wether sealing, reinforcement, shuttering, sound insulation or thermal insulation the company offers innovative solutions meeting the highest demands for quality. Long-standing experience, userorientated developement and a wide range of products are the basis for the succes of H-BAU. Quality - Made in Germany H-BAU stands for high-quality products and for safe processes and procedures. The company is certified in accordance with DIN EN ISO 9001:2008. The complete production is in Germany. The extensive experience of our employees builds the basis for a successful developement of innovative products. H-BAU makes the highest demands on material, quality and efficient processing. Innovation requires dialogue Constant improvements and a cooperative association with customers, partners and employees are the focus of H-BAU's corporate activities. Virtually every company likes to praise its innovative power but we really do deliver! Every new idea must be different, otherwise it does not deserve the name "idea". The most important source of ideas leading to efficient and practical solutions is the requirements and demands of customers. References Bath Paradise Black Forest (Germany) Solution Atelier Residance Warsaw Solution Thermal Insulation Daimler Chrysler Office Building Warsaw Solution Central Bus Station Munich Solution Shuttering Burda Media Offenburg Solution Thermal Insulation Eastgate Berlin Solution Shutterig 4 Product Range H-BAU Technik GmbH
5 PENTAFLEX Sealing System for better solutions PENTAFLEX is a joint sealing system for producing watertight concrete structures (white tank). The PENTAFLEX elements are completely provided with a special coating and have been designed for structures with premium utilisation. They reliably seal joints in the wall/foot or wall/ ceiling area, joints in the wall/wall or floor/floor area and joints in cast-in-situ concrete and component wall constructions reliably. Impervious up to 5.0 bar (according to general appraisal certificate 2.0 bar) Quick, secure sealing of all construction and control joints also after subsiding of the shrinking process in concrete Best possible safety for planning and execution Resistant against all organic effluents PENTAFLEX KB joint sheet, DFA expansion joint connection and floor lead-throughs PENTAFLEX KB with embedment line PENTAFLEX KB : joint sheet PENTAFLEX KB Plus: joint sheet and foundation earth electrode PENTAFLEX ABS: shuttering element PENTAFLEX FTS: prefabricated break-off element PENTAFLEX OBS: cast-in-situ break-off element PENTAFLEX : expansion joint connection PENTAFLEX sump well PENTAFLEX pipe lead-through PENTAFLEX sound insulation joint PENTAFLEX ABS shuttering element with thethed profile KB, FTS/OBS: galvanised steel sheet with special coating ABS: shuttering element made of expanded metal with reinforced steel construction, sealed by PENTAFLEX KB joint sheet. Pipe lead-through: made of PP or PVC with coated water stop Sump well: made from PE with coated water stop Approval General appraisal certificate Sealing with PENTAFLEX sealing system Product Range H-BAU Technik GmbH 5 Accesories Connection Systems Thermal Insulation Sound Insulation Shuttering
6 KUNEX Joint Tapes Construction and expansion joints in concrete are sealed securely by using KUNEX joint tapes from H-BAU. KUNEX joint tapes guarantee a very good mechanical connection from concrete to concrete hence a reliable sealing. The joint tapes are manufactured of thermoplastic PVC-P in the highest quality. Sealing tubes are used to seal dummy joints. Object-specific joint tape constructions are used to form watertight connections at existing buildings. KUNEX expansion joint tape Accessories Connection Systems Thermal Insulation Sound Insulation Shuttering Suitable for the use in structures corresponding to watertight structure guidelines. Flexibility thanks to a wide standard product range and joint tape constructions as per customer request Tested and proven thousandfold Sealing of a construction joint with KUNEX construction joint tape KUNEX construction joint tape internal and external KUNEX expansion joint tape internal and external KUNEX clamp waterstop KUNEX waterstop-corner joint KUNEX star tube KUNEX joint masking and closing tapes KUNEX joint end strip KUNEX silo construction joint KUNEX welded constructions Sealing of an expansion joint with KU- NEX expansion joint tape 6 Product Range H-BAU Technik GmbH Standard PVC-P raw material available as works standard with general appraisal certificate and DIN-Strips: DIN standard (DIN 18541) bitumen-compatible (BC) or non-bitumen-compatible (NB) Works standard bitumen-compatible (BC) or non-bitumen-compatible (NB) Approval General appraisal certificate Sealing of a construction joint with KUNEX waterstop-corner joint
7 PLURAFLEX Injektion Hoses for better solutions PLURAFLEX injection hoses are a jointing system that supplements the PENTAFLEX sealing system from H-BAU. The injection hoses are used in civil engineering and engineering construction when special requirements for methodical sealing of construction joints appear. Particularly in the construction of tunnels, it is the optimum solution for the first sinking under pressure. Can be compressed several times Proven in civil engineering, engineering and tunnel construction Proven in use PLURAFLEX type C11 PLURAFLEX C11: single-wall injection hose for low-viscosity injection material can be repeatedly compressed PLURAFLEX P11: double-wall injection hose for injection pastes and cements as well as low viscosity injection material can be repeatedly compressed PLURAFLEX P19: double-wall injection hose for Portland cement, injection pastes and cements as well as low viscosity injection material can be repeatedly compressed PVC injection hose: smooth surface that prevents an unrequested bond between injection hose and concrete. Injection also possible after many years because the smooth surface prevents fusion or sintering in the system. Approval General appraisal certificate Tunnel sealing with PLURAFLEX Tunnel sealing with PLURAFLEX Tunnel sealing with PLURAFLEX Product Range H-BAU Technik GmbH 7 Accesories Connection Systems Thermal Insulation Sound Insulation Shuttering
8 SWELLFLEX Waterstop Tapes SWELLFLEX waterstop tapes are a reliable supplement to conventional joint sealing systems. They seal joints in concrete constructions which are continuously or partially exposed to pressurised water. During concreting of the component, the expansion tapes are completely surrounded by the fresh concrete. They expand with water contact and build up a pressure that seals the construction joint. SWELLFLEX RB Shuttering Accessories Verbindungstechnik Thermal Insulation Sound Insulation Proven in civil engineering and engineering construction Expanding and shrinking process often indefinitely reversible Easy handling Wide product range Sealing of a construction joint with SWELLFLEX BT SWELLFLEX BS: sodium bentonite waterstop tape SWELLFLEX BT: sodium bentonite waterstop tape with patented rain-protection coating for processing irrespective of the weather conditions SWELLFLEX RB: rubber swelling tape Fastening of SWELLFLEX swelling tape with a metal rail 8 Product Range H-BAU Technik GmbH BS and BT: sealing tape based on bentonite and butyl rubber RB: extruded rubber composite, consisting of butyl natural rubber, water source resins, polyethylenes and silicones Approval General appraisal certificate
9 Surface Sealing for better solutions SWELLPROOF and SWELLFLEX are geotextile, water-activated seals for special application on external surfaces which have to be sealed. The sealing stripes offer new and unique possibilities due to the use of bentonite as a clay sealing strip (SWEELPROOF) or source-modified polymers (SWELLFLEX ). Also for sealing concrete building components with large surface areas which get into contact with the ground Innovative, efficient, safe Environmentally friendly and decay Tunnel exterior sealing with SWELLPROOF Surface sealing with SWELLFLEX EasySeal SWELLPROOF DS: hiqh-quality bentonite double surface sealing SWELLPROOF CS: in addition to DS, rotproof and radon impervious SWELLFLEX EasySeal: expanding agent sealing sheet with low mass per unit area SWELLFLEX SilverSeal: in addition to EasySeal, laminated PE film Surface sealing with SWELLPROOF DS DS: consisting of PE-3-D composite and standard bentonite sealing mat (GTD/GCL) CS: in addition to DS, with PE coating and radon sealing EasySeal: fleece with expanding agent, polymers SilverSeal: in addition to Easy- Seal, with PE film Surface sealing with SWELLPROOF bentonite sealing mat Product Range H-BAU Technik GmbH 9 Accesories Connection Systems Thermal Insulation Sound Insulation Shuttering
10 FERBOX Reverse Bending Connectors FERBOX reinforcement connections are prefabricated reverse bending connectors for easy and positive locking connection of reinforced concrete components of various phases of construction. In this way walls, ceilings, consoles, stairs will be subsequently and reliably connected. For more than 30 years, H-BAU has produced and distributed single and double-row reverse bending connectors in numerous standard and special types with retaining boxes in different versions. FERBOX type BQ Accessories Connection Systems Thermal Insulation Sound Insulation Shuttering Practical and easy-to-assemble reverse bending connectors Wide variety of types Shearforce transmission typetested according to EC2 as well as the console port connectors Cover made of dimensionally stable plastic safe, quick and easy to remove Uniform standard of quality ensured by continuous self-monitoring and external monitoring FERBOX rebending connection type D with reversed reinforcing beams FERBOX type E: single row connector FERBOX type B: double row connector FERBOX type BQ: double row connector, for joints shear force crossways FERBOX type BL: double row connector for joints shear force lenghtways FERBOX type D: double row connector for dimensions 270 mm FERBOX type F: double row connector for prefabricated walls FERBOX rebending connection type E installed on the shuttering 10 Product Range H-BAU Technik GmbH Retaining box made of steel sheet profile, reinforcement rods (ø 6 16 mm) B500B, cover made of plastic. Approval Type tested according to EC2 no /12 FERBOX rebending connection type B set in concrete on wall; for connection of a ceiling
11 FIBERNOX V-ROD GFK Bewehrungsstäbe for better solutions The FIBERNOX V-ROD reinforcement rods consist of environmentally sustainable fibre reinforced material. The glass-fibre reinforcement is distinguished by corrosion and alkali resistance, by a high tensile strength at a light weight and by a great adherence in the concrete. FIBERNOX V-ROD is an effective alternative to rust-proof or electro-plated reinforcement steel. Corrosion and alkali resistant In comparison to steel reinforced concrete: considerably higher durability of building structures which are exposed to aggressive environmental conditions High tensile strength at a light weight FIBERNOX V-ROD Permeable for magnetic fields and radio-frequencies Dimensionally stable and very good connection with concrete Certified in Canada by CAN CSA S Harbour fixation with FIBERNOX V-ROD Bridge reinforcement with FIBERNOX V-ROD Made of fibre reinforced material, consisting of glass-fibre lacings with synthetic resin and a special surface finish for best possible connection. Straight or bent bars are available. Column reinforcement with FIBERNOX V-ROD Product Range H-BAU Technik GmbH 11 Accesories Connection Systems Thermal Insulation Sound Insulation Shuttering
12 Stainless Steel Accessories Connection Systems Thermal Insulation Sound Insulation Shuttering The H-BAU stainless steel reinforcement RIPINOX and STAIFIX is designed for the areas in reinforced concrete with the highest requirements for the durability of the reinforcement. It is used in constructions where increased protection against external influences or a filigrane geometry of the components is required, e.g. in the event of a corrosive environment or little concrete covering. H-BAU also provides the optimum solution for renovating and reinforcing of masonry. Suitable for critical areas in reinforced concrete construction, e.g. bridge construction, for facade concrete slabs, for supporting walls or in swimming pools Straight or curved reinforcement beam available No risk of corrosion RIPINOX : can be weldable and antimagnetic STAIFIX : high tensile strength and fatigue resistant RIPINOX RIPINOX : rust-proof ribbed concrete reinforcement STAIFIX : high-strength and corrosion-resistant steel STAIFIX accessories: nuts couplings turnbuckles anchor plates RIPINOX stainless steel reinforcement STAIFIX anchor prestressing STAIFIX accessories 12 Product Range H-BAU Technik GmbH : RIPINOX : rust-proof reinforced ribbed concrete, reinforcement steel material no STAIFIX : rust proof stainless steel, tool steel material no , smooth or ribbed version Other materials (e.g. tool steelmaterial no , ) on request Approval RIPINOX : building-authority approved
13 GRIPRIP Masonry for better solutions GRIPRIP is used as butt joint anchoring or as constructional masonry reinforcement and serves as crack prevention. The combination of high-quality aramide fibre and the mesh form ensures an optimum division of force in the wall joints. Applicable in every mortar, also in thin-bed or lightweight mortars No corrosion problems of the bed joints in the masonry No risk of injury by protruding masonry commectors GRIPRIP masonry reinforcement GRIPRIP type S masonry reinforcement GRIPRIP type A: constructional masonry reinforcement to prevent cracks GRIPRIP type S: masonry connectors for butt joint anchoring GRIPRIP type S with masonry suitable for connection Mesh made of aramide fibres (polyamide fibre with excellent durability, excellent fatigue behavior, high strength and breaking strain). Masonry with GRIPRIP type S Product Range H-BAU Technik GmbH 13 Accesories Connection Systems Thermal Insulation Sound Insulation Shuttering
14 Winner of 2013 Concrete Element Supplier Industry s Innovation Prize RAPIDOBAT Shuttering Tubes With RAPIDOBAT shuttering tubes, H-BAU provides a system of column formwork for easy and economic manufacturing of round and rectangular columns. The shuttering tubes consist of multi-layered, very stable webs of paper and cardboard. In addition, the shuttering tubes could be specially refined depending on the demands placed on the exposed concrete and requirements of the architect. Various versions are available. RAPIDOBAT Cretcon HD Shuttering Accessories Connection Systems Thermal Insulation Sound Insulation RAPIDOBAT Cretcon HD: proven exposed concrete class SB4, thanks activatable hydrogelshuttering-skin Integrated ripcord for easy striking Material can be recycled Dimensionally stable, also in driving rain Suitable capitals and bases available RAPIDOBAT shuttering tubes on the building site RAPIDOBAT Cretcon HD: for outstanding, flawless exposed concrete columns, free of disturbing pores and marblings RAPIDOBAT lined: for a very smooth concrete surface RAPIDOBAT unlined: slight spiral attribute possible RAPIDOBAT square and rectangular: for rectangular columns with a very smooth concrete surface RAPIDOBAT lined; on the left side already removed 14 Product Range H-BAU Technik GmbH Shuttering tubes made of recyclable multilayered, very stable paper and cardboard webs with water-impermeable inner and outer web. Special solutions On request, manufactoring of creative and demanding special forms from conical shaped pillars to ellipses and L-columns. RAPIDOBAT special version
15 Shuttering for better solutions Whether permanent shuttering for construction joints or formwork elements for slab edges H-BAU shuttering elements always provide an optimum solution and are available in various versions for different applications. The suitable shuttering elements will be assembled on the construction site and attached to the reinforcement. The elements Warmbord and Schalbord considerably reduce the expenditure of time for setting a stop end of the ceiling edge. AX-R shuttering element for rough joints High stability Shuttering elements in teethed profile for transmission of high shear forces Fast and simple shuttering of floor edges Economical shuttering of concreting steps A-V shuttering element according to EC2 Shuttering elements A and AX: permanent formwork for construction joints Warmbord: permanent formwork for concrete ceilings and thermal insulation in one Schalbord: quick, economic slab-edge shuttering Slab-edge shuttering element Warmbord Shuttering element A and AX: made of expanded metal, available as raw or teethed joint in accordance with EC2 and in a steel-reinforced design (AX) for high demands Warmbord: made of styrofoam, thermal conduction group 035 Schalbord: made of cementbound wood fibre board Schalbord slab-edge shuttering Product Range H-BAU Technik GmbH 15 Accesories Connection Systems Thermal Insulation Sound Insulation Shuttering
16 Sound Insulation By using H-BAU impact noise insulation elements, flights of stairs and landings are reliably detached from impact sound. They serve as elementary attributes in housing construction and are required for execution corresponding to increased sound insulation in accordance with DIN The product range provides a suitable solution for every installation situation of reinforced concrete stairs and landings. Sound Insulation Connection Systems Thermal Insulation Sound Insulation Shuttering Type tested Sound insulation tested High reduction in impact sound Conforms to the requirements of increased sound insulation in accordance with DIN 4109 Wide variety of types available for linear and punctual connection Spiral staircase with ISODORN HQW sound insulation Schall-ISOBOX TSB: for stair landings Schall-ISOSTEP HTV: for straight flights of stairs Schall-ISODORN HQW: for spiral flights of stairs Schall-ISOTRITT Z and ZB: for prefabricated staircases Sound insulation plate TSP: to avoid sound bridging problems Mounted ISODORN HQW sound insulation and reinforcement TSB and HQW: sound box made from CFC and halogen-free, polyurethane integral foam with EPDM elastomer bearing, bearing element made from galvanised steel (HQW) HTV: damping element with framework made from B500B NR and integrated EPDM elastomer bearings Z and ZB: body made from polypropylene foam with integrated SD rib bearings TSP: roll goods made from polyethylene Model of a prefabricated staircase with ISOSTEP HTV sound insulation Accessories 16 Product Range H-BAU Technik GmbH
17 ISOPRO Thermal Insulation 80 mm for better solutions The thermal insulation elements ISOPRO from H-BAU reliably establish positive locking connections of external components made from concrete with internal components. With an insulation thickness of 80 mm, ISOPRO solves thermal insulation and structural weak points in the shell of the building. ISOPRO type IP Easy, quick, efficient Reduces heating costs Prevention of damage caused by mould and moisture Stainless steel for a reliable exclusion of corrosion problems and for the reduction of the thermal flow in the framework to a minimum ISOPRO elements fully mounted in the ceiling ISOPRO IP and IPT: for cantilevered slabs ISOPRO IPQ and IPQQ: for supported components ISOPRO IPTD: for continuous slabs ISOPRO IPQS and IPQQS: for the punctual connection of supported components ISOPRO elements during reinforcement work 80 mm insulation body: made from NEOPOR with l = W/mK beams: made from B500B and B500NR. Thrust bearing: made from special, high-strength concrete Approval Building-authority approved Z and Z , typetested according to EC2 Prefabricated balcony connected by using ISOPRO elements Product Range H-BAU Technik GmbH 17 Accesories Connection Systems Thermal Insulation Sound Insulation Shuttering
18 ISOMAXX Thermal Insulation 120 mm ISOMAXX is the further development of the well-known ISOPRO balcony insulation elements from H-BAU. The thermal insulation elements ISOMAXX reliably establish positive locking connections of external components made from concrete with internal components. With an insulation thickness of 120 mm and the excellent insulation characteristic, the elements are well suited for application in buildings with especially high demands on the thermal insulation. ISOMAXX type IMT Accessories Connection Systems Thermal Insulation Sound Insulation Shuttering Excellent insulation characteristics Prevention of damage caused by mould and moisture Stainless steel for reliable exclusion of corrosion problems and for the reduction of the thermal flow in the framework to a minimum Reduction of the heating costs ISOMAXX elements being fitted on the building site ISOMAXX IM and IMT: for cantilevered slabs ISOMAXX IMQ and IMTQQ: for supported components ISOMAXX IMTD: for continuous slabs ISOMAXX IMTQS and IMTQQS: for the punctual connection of supported components ISOMAXX special elements 18 Product Range H-BAU Technik GmbH 120 mm insulation body: made from NEOPOR with l = W/mK beams: made from B500B and B500B NR Thrust bearing: made from special, high-strenght concrete Approval Building-authority approved Z and Z , type-tested according to EC2 and sound insulation tested Prefabricated concrete parts connected by using ISOMAXX elements
19 ISOMUR Wall Base for better solutions Thermal bridges frequently present a typical weak point in the area of the wall foot above the basement ceiling. The wall foot elements ISOMUR solve the problem of the thermal bridge at the base of the wall. They close the gaps in the interrupted thermal insulation between the insulation above the basement ceiling and the external wall and minimise heat loss through the base of the building. ISOMUR Wall Base Element Healthy and comfortable indoor climate Minimised heat loss and saving of heating costs at the same time Prevents the generation of mould and condension water Various applications Made from non-absorbent material High pressure resistance ISOMUR wall base elements in combination with facing brickwork ISOMUR wall base element made from styrofoam with an integrated support structure made from high-strength lightweight concrete Positioning of ISOMUR elements on the building site Approval Building-authority Z approved ISOMUR wall base elements in combination with KS masonry Product Range H-BAU Technik GmbH 19 Accesories Connection Systems Thermal Wärmedämm- Insulation Sound Insulation Shuttering elemente
20 Shear Dowels HED & JSD+ Shear dowels from H-BAU are used when shear forces between concrete components need to be safely transmitted across construction and expansion joints. They are suitable for thinner components and low loads (HED) as well as for constructions which have to transmit high shear forces (JSD+). High-performance dowel JSD+ Shuttering Sound Insulation High-quality stainless steel design and permanent protection against corrosion R90 with fire protection sleeve Special sliding sleeves to accommodate lateral displacement of the slabs available Product Range Shear dowels HED: displacing the components along the longitudinal axis of the beam up to a joint width of 40 mm, as well as transmitting vertical and horizontal loads (e.g. wind loads) High-performance dowels JSD+: especially for transmitting high shear forces for uni-axial or bi-axial displacement HED: available in various grades of steel ex-stock; e.g. S355 galvanised, V4A corrosion protection cat.iii Sliding sleeves made from plastic or stainless steel JSD+: made from stainless steel with permanent protection against corrosion Thermal Insulation Connection Systems Slab dowelling with HED shear dowels Installed sliding sleeve for HED shear dowel Shear force transmission with highperformance dowels JSD+ Zubehör 20 Product Range H-BAU Technik GmbH
21 UNICON Fast Connection System for better solutions UNICON is an innovative fast connection system from H-BAU. It allows a positive locking connection of building elements as well as plugging of media in precast constructions just by putting the components together. With this modular system, prefabrication of the elements can be effected up to 100% at the prefabrication plant. It ensures a higher quality level of the construction parts and saves money at the same time. Various connecting elements are available. POWERCON Multi Revolutionary, universal fast connection system for building activities with precast components Simple plug-in assembly on the construction site Prefabrication of components at the prefabrication plant Integration of media connections Non-destructive deconstruction Connection of complete prefabricated parts by using POWERCON POWERCON : load connector POWERCON Multi: load connector with adjustability POWERCLIP: connector for floor/wall connection AQUACON : water system connector SANICON: ventilation and sewage system connector ENERCON : electricity and ductwork system connector POWERCON and POWERCON Multi: made from galvanised cast steel AQUACON : water plug made from dezincification-free brass with 3-fold o-ring seal and 1/2 internal thread connection SANICON: made from GRP plastic ENERCON : 7-pole connector, VDE approved in accordance with EIF BASECON: made from GRP plastic Connection of complete prefabricated Prefabricated wooden wall with parts by using POWERCON POWERCON and ENERCON connectors Product Range H-BAU Technik GmbH 21 Shuttering Accesories Connection Systems Thermal Insulation Sound Insulation
22 Accessories accessories are necessary to secure concrete ceilings and are required for the reinforcement layer as well as to ensure the construction of the upper and lower reinforcement layer. From fibre reinforced concrete, steel or plastic to tying wires and spring clip fixing ties H-BAU provides a comprehensive range of accessories for reinforcement on the construction site or at the prefabrication factory. accessories Connection Systems Thermal Insulation Sound Insulation Shuttering Reinforced concrete spacers tested in accordance with the DBV (German Concrete and Construction Technology Association) leaflet for compressive resistance, water penetration depth and frost/ thaw change Special spacers for vertical or horizontal installation Spacers are available for different requirements on the concrete surface Steel snake spacers between two reinforcement layers Steel accessories Steel snake spacers: spacers between the upper and lower reinforcement layer Spring clip fixing ties: for quick, easy binding of reinforced concrete Tying and double tie wires: for binding reinforced concrete Concrete spacers Single and surface spacers: to maintain the concrete ceiling required Fibre concrete spacers with vertical and horizontal reinforcement in the reinforced concrete components for horizontal and vertical reinforcement layers Plastic spacers Single and surface spacers: to maintain the concrete ceiling required in the reinforced concrete components for horizontal and vertical reinforcement layers Sample configuration of various reinforcement accessories Accessories 22 Product Range H-BAU Technik GmbH
23 Shuttering Accessories for better solutions Shuttering accessories are used in the production of cast-in-situ concrete components. They are required to maintain the width of the wall as well as to tie the formwork. H-BAU has a comprehensive range of products, including formwork spacers for exposed concrete or WU components, fixing technology as well as base plates and various plastic profiles. Shuttering Accessories Proven in use High-quality materials Tested manifold Formwork anchors Anchor bars in various versions Nuts and load distribution plates Water stops and cones Assembly and attachment anchors Formwork spacers Fibre concrete formwork spacers, WU-approved Tie points and distance pipes Various accessories Prefabrication plant Spacers for the production of double walls Assembly dowel for attaching prefabricated walls Accessory: formwork anchors Accessory: spacers and tie points Use of anchors and formwork accessories on the building site Connection Systems Thermal Insulation Sound Insulation Shuttering Product Range H-BAU Technik GmbH 23 Accessories
24 Double-Wall Transport Anchor KE The double-wall transport anchor KE ensures safe erecting, relocating and transporting of element walls in prefabrication plants and on construction sites. Carefully selected material and the proven construction significantly increase the flexibility. Double-Wall Transport Anchor KE III Connection Systems Thermal Insulation Sound Insulation Shuttering Unique product regarding safety, application technology and economy Graduated load capacities for efficient planning Fast and easy installation for an unproblematic production flow Position can be planned independent of the formwork girders CE marking Moving an element wall by using KE transport anchor Transport anchor type KE I: for small surface slabs with little weight Transport anchor type KE III: for common slab dimensions, with GS mark for the best possible safety Transport anchor type KE IV: for slabs with special requirements Installed KE transport anchor Made from smooth, high-ductile round steel with a precise pressure element made from high-quality laminated veneer lumber. Element walls with KE transport anchors Accessories 24 Product Range H-BAU Technik GmbH
25 Notes for better solutions Product Range H-BAU Technik GmbH 25
26 Notes Product Range H-BAU Technik GmbH 26
27 Notes for better solutions Product Range H-BAU Technik GmbH 27
28 Systematic concreting... ISOMAXX ISOPRO PENTAFLEX RAPIDOBAT FERBOX KUNEX HED GRIPRIP SCHALL-ISO PLURAFLEX RIPINOX WARMBORD SCHALBORD UNICON KE III ACCESSORIES 120 mm thermal insulation elements 80 mm thermal insulation elements Sealing technology Shuttering tubes Rebending connection systems Sealing technology Sliding arbors Masonry tie Sound insulation elements Sealing technology Stainless steel, corrosion-resistant Shuttering elements Shuttering elements Fast connectors Transport anchors Spacers H-BAU Technik GmbH Am Güterbahnhof Klettgau Phone +49 (0) Telefax +49 (0) Production And Delivery North-East Brandenburger Allee Nauen OT Wachow Phone +49 (0) Telefax +49 (0) info.berlin@h-bau.de Production Chemnitz Beyerstraße Chemnitz Phone +49 (0) Telefax +49 (0) /2013
RAPIDOBAT shuttering tubes
for better solutions... RAPIDOBAT shuttering tubes For round and angular reinforced concrete columns RAPIDOBAT made in Germany Rounded or squared,...we re always prepared. RAPIDOBAT Contact Oslo Helsinki
More informationTHE worldwide innovation. For walls as safe as Fort Knox. for better solutions...
THE worldwide innovation Reinforcement and reinforcement connections For walls as safe as Fort Knox for better solutions... www.h-bau.de THE worldwide innovation Paul Rieger Tel. +49 (0) 7742 / 9215-21
More informationPRODUCT OVERVIEW. It's all about diversity. Sealing Thermal insulation Formwork Sound insulation Reinforcement Connection Accessories
PRODUCT OVERVIEW It's all about diversity Sealing Thermal insulation Formwork Sound insulation Reinforcement Connection Accessories OUR MISSION: FORWARD CONSTRUCTING. It is our mission not only to provide
More informationSealing products. The new Generation of sealing-products
Sealing products The new Generation of sealing-products Product Overview Product wolfseal KB 16 Application wolfseal KB 16.7 can be installed in construction joints of all types in concrete units up to
More informationReinforcements and reinforcement connectors
for better solutions Reinforcements and reinforcement connectors for reinforcement and joining of concrete structural components Reinforcement for a secure connection www.h-bau.com Locations of our regional
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-11267-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 17.08.2018 to 01.10.2022 Holder of certificate: Materialprüfanstalt
More informationThermal insulation elements DIN
for better solutions... Thermal insulation elements DIN 1045-1 for balconies and thermally-insulated external components ISOPRO made in Germany ISOPRO insulation at its highest level www.h-bau.com H-Bau
More informationBBA 001 Documents included under the scope of BBA s ISO UKAS accreditation
BBA 001 Documents included under the scope of BBA s ISO 17065 UKAS accreditation Product Standard Building Systems and Kits BBA Technical Specification 001 Ceiling Products BBA Technical Specification
More informationType II Environmental Declaration according ISO 14021:2001/A1:2011
Type II Environmental Declaration according ISO 14021:2001/A1:2011 Product: Hunter Douglas Panels Module 200-600mm Product code: 26005 Module 601-900mm Product code: 26025 Module 901-1200mm Product code:
More informationTECHNICAL MANUAL. TENLOC Panel Connector. Hidden Latch Connection for Precast Panels
TECHNICAL MANUAL TENLOC Panel Connector Hidden Latch Connection for Precast Panels Version: Peikko Group 06/2018 TENLOC Panel Connector Fast connection for precast elements TENLOC Panel Connector is a
More informationFRANK Stremaform formwork elements
FRANK formwork elements technologies for the construction industry Applications Working joints working joints enable large structural elements to be formed in sections. The sequence of these working joints
More informationOPTIWIN PURISTA. Technical Description. Synopsis:
Technical Description OPTIWIN PURISTA Synopsis: 1. Product "OPTIWIN PURISTA" General Description... 2 2. Materials... 3 2.1. Wood... 3 2.2. Surface... 3 2.2.1. Inside... 3 2.2.2. Outer shell... 4 2.3.
More informationCHARACTERISTICS / ADVANTAGES
PRODUCT DATA SHEET Flexible PVC Waterstops PRODUCT DESCRIPTION Flexible PVC waterstops used to seal construction and expansion joints in concrete structures. Sika -Waterbars are available in different
More informationBlast Resistant Enhanced Curtain Wall. Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION PERFORMANCE
Blast Resistant Enhanced Curtain Wall Blast Resistant Enhanced Curtain Wall Reference Brand: Sapa Building System Elegance 85PF GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More informationSika KAB combination joint waterbars waterstopping systems
PRODUCT DATA SHEET Sika KAB combination joint waterbars Waterbars for waterproofing construction and crack induced shrinkage joints in new reinforced concrete structures PRODUCT- DESCRIPTION KAB 125/KAB
More informationPENTAFLEX. Sealed joints for pressurised and non-pressurised water ETA-15/0003
PENTAFLEX Sealed joints for pressurised and non-pressurised water ETA-15/0003 Sealing Thermal insulation Formwork Sound insulation Reinforcement Connection Accessories PENTAFLEX OUR CONVICTION: FORWARD
More information(Text with EEA relevance) (2017/C 10/02)
C 10/2 EN Official Journal of the European Union 13.1.2017 Commission communication in the framework of the implementation of Regulation (EU) No 305/2011 of the European Parliament and of the Council laying
More informationPLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION
DRAINAGE SOLUTIONS SINCE 1908 PLATON RUGGED, DIMPLED HIGH-DENSITY POLYETHYLENE (HDPE) MEMBRANE THAT KEEPS FOUNDATIONS AND FLOORING DRY ADVANCED TECHNOLOGY EASY INSTALLATION PROVEN PERFORMANCE ARMTEC.COM
More informationSpacer Technologies. P:
P A R C H E M C O N S T R U C T I O N S U P P L I E S Spacer Technologies P: 1800 801 108 www.parchem.com.au Parchem / Max Frank Parchem Construction Supplies is the National Distributor of the Max Frank
More informationUnitised Curtain Wall Beaded
Unitised Curtain Wall Beaded Glazed Frame Unitised Curtain Wall Reference Brand: Sapa Building System Elegance 72 GF GENERAL DESCRIPTION Unitised curtain wall system using glazing beads for glass retention.
More informationOPTIWIN MOTURA. Technical Description. Synopsis:
Technical Description OPTIWIN MOTURA Synopsis: 1. Product "OPTIWIN MOTURA" General Description... 2 2. Materials... 3 2.1. Wood... 3 2.2. Surface... 3 2.2.1. Inside... 3 2.2.2. Outer shell... 4 2.3. Glazing...
More informationCurtain Wall Stick System (Capped)
Curtain Wall Stick System (Capped) Stick Construction Capped Curtain Wall Reference Brand: Sapa Building System Elegance 52 ST GENERAL DESCRIPTION Grid based thermally insulated curtain wall system with
More informationGLASS FIBRE MESH FABRICS. Stronger ideas for a sustainable world ETICS. Marble slab reinforcement. Lightweight construction boards reinforcement
GLASS FIBRE MESH FABRICS Marble slab reinforcement ETICS Mosaic reinforcement Lightweight construction boards reinforcement Profile manufacture Render reinforcement Floor heating mats Stronger ideas for
More informationConcrete Framing Systems - Walls and Columns
Concrete Framing Systems - Walls and Columns Casting a Concrete Wall Wall Footing Reinforcing Wall Forms Pouring Concrete Finishing the Concrete Controlling Cracking Insulating Concrete Forms (ICF) Tilt-Up
More informationConstruction. Tricosal Waterstops - Tricomer. Waterstops for joint sealing in watertight concrete construction according to DIN and DIN
Construction Product Data Sheet Edition 19 April 2013 Tricosal Waterstops - Tricomer Waterstops for joint sealing in watertight concrete construction according to DIN 18541 and DIN 18541-2 Product Description
More informationReinforced concrete double walls
Reinforced concrete double walls Build faster, pay less. Strength in building technology Uses The Kerkstoel reinforced double walls consist of two slabs of reinforced concrete joined to each other by lattice
More informationWATERPROOFING SikaSwell HYDROPHILIC PROFILES AND SEALANTS ACTIVE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS
SikaSwell HYDROPHILIC PROFILES AND SEALANTS ACTIVE SOLUTIONS FOR CONSTRUCTION JOINTS SikaSwell ACTIVE SYSTEM HYDROPHILIC JOINT SEALING SYSTEMS like SikaSwell profiles and sealants are waterstops which
More informationWATERPROOFING SikaSwell Hydrophilic Profiles and Sealants ACTIVE WATERPROOFING SOLUTIONS FOR CONSTRUCTION JOINTS
SikaSwell Hydrophilic Profiles and Sealants ACTIVE SOLUTIONS FOR CONSTRUCTION JOINTS SikaSwell ACTIVE SYSTEM HYDROPHILIC JOINT SEALING SYSTEMS like SikaSwell profiles and sealants are waterstops which
More informationmatteco CONSTRUCTION sound insulation products
matteco CONSTRUCTION sound insulation products for walls and ceilings for timber and solid structures A small financial investment increases the value of your property. You gain peace and quiet and living
More informationSystem Description BRF. Drinking water pipes. BRUGG drinking water pipe, Type BRF made of stainless steel V2A / V4A. Construction: 07.
System Description 10. BRUGG drinking water pipe, Type made of stainless steel V2A / V4A The pipe is a preinsulated plastic jacket pipe system for transporting drinking water or sewage. It is a pipe system
More informationConstruction. SikaProof A. Fully bonded FPO sheet waterproofing membrane system for basement and other below ground structures. Product Description
Construction Product Data Sheet Edition 17 April 2012 SikaProof A Fully bonded FPO sheet waterproofing membrane system for basement and other below ground structures Product Description SikaProof A is
More informationCable entries and earthings for secondary substations and industrially manufactured technical buildings
Always. Reliable. Tight. Cable entries and earthings for secondary substations and industrially manufactured technical buildings cablepipebuildingentry Cable entries for secondary substations and industrially
More informationTECHNICAL MANUAL. PEC Column Shoe. Heavy-duty Bolted Column Connections
TECHNICAL MANUAL PEC Column Shoe Heavy-duty Bolted Column Connections Version: PEIKKO GROUP 09/2018 PEC Column Shoe For bolted column connections Advanced casting process with the help of standard accessories
More informationXtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as
More informationConstruction. Injectable hose for sealing construction joints in watertight structures. Product Description. Product Data. Tests.
System Product Data Sheet Edition 09/01/2009 Identification no: 02 07 03 07 010 2 000099 ( SikaFuko Eco 1 Injectable hose for sealing construction joints in watertight structures Construction Product Description
More informationStremaform. Formwork elements. Edition International
Formwork elements Edition International www.maxfrank.com Formwork elements Content Applications...................................4 System........................................6 Material types..................................7
More informationCONCRETE BLOCK MASONRY
CONCRETE BLOCK MASONRY CONTENT Introduction Types Manufacturing process Properties Advantages Introduction These are the concrete blocks either hollow or solid. A hollow unit is that unit which has core
More informationEXCELLENCE ON RAILS SYSTEMS FOR SAFE TRACTION POWER SUPPLY FOR UNDERGROUND/SUBURBAN RAILWAYS. Construction Automotive Industry
EXCELLENCE ON RAILS SYSTEMS FOR SAFE TRACTION POWER SUPPLY FOR UNDERGROUND/SUBURBAN RAILWAYS www.rehau.com Construction Automotive Industry EXCELLENCE ON RAILS SYSTEMS FOR SAFE TRACTION POWER SUPPLY FOR
More informationConstruction. Flexible PVC waterstops. Product Description. Product Data. Tests. Form. Storage. Technical Data
Construction Product Data Sheet Edition 2016-07_1 Flexible PVC waterstops Product Description Uses Characteristics / Advantages Flexible PVC waterstops used to seal construction and expansion joints in
More informationEXP. Tilux-Line 4-6 DURABASE WP 7. Tilux Quick finder 11
EXP TILUX-LINE Linear drainage Level-access shower boards TILUX Point drainage Tilux-Line 4-6 DURABASE WP 7 Tilux 8-10 Quick finder 11 Tilux-Line Linear drainage Tileable shower boards Tilux Point drainage
More informationSECTION 415 REINFORCING FOR CONCRETE
SECTION 415 REINFORCING FOR CONCRETE Module 5 August 2018 Release 10, Module 5 1 Release 10, August 2018 5-1 415 1 Description Furnish and place steel and fiber reinforced polymer (FRP) reinforcing of
More informationPreventing Water Leakage through Construction Joints using SYNKOFLEX Preformed Compressible Waterstop
Preventing Water Leakage through Construction Joints using SYNKOFLEX Preformed Compressible Waterstop Introduction A typical problem in most Water Retaining Structures is the leakage of water through Construction
More informationBETOCRETE C-Series. Integral waterproofing for concrete
BETOCRETE C-Series Integral waterproofing for concrete BETOCRETE C-Series Introduction The BETOCRETE C-Series becomes an integral part of the concrete matrix with mechanical damage to the microstructure
More informationStyrodur C, Environmentally friendly extruded polystyrene free of CFC, HCFC, and HFC filled with air.
Styrodur C, Environmentally friendly extruded polystyrene free of CFC, HCFC, and HFC filled with air. Thermal insulation does more than protect the climate Effective thermal insulation with Styrodur C
More informationPVC profile waterstops for joint sealing
Product Data Sheet Edition 29/08/2014 Identification no: 02 07 03 01 005 0 000007 Sika - PVC Waterbars PVC profile waterstops for joint sealing Construction Product Description Uses Characteristics / Advantages
More informationHALFEN HLB LOOP BOX Z-HLB-M50 13-E CONCRETE
HALFEN HLB LOOP BOX Z-HLB-M50 13-E CONCRETE Translation of the General Certificate of Approval Approval Office: German Institute for Construction Engineering (Deutsches Institut für Bautechnik DIBt) Kolonnenstrasse
More informationArt Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966"
Art Mould Plastics "SUPPORTING THE REINFORCING CONCRETE INDUSTRY SINCE 1966" 1 of 10 Table of Contents Individual Support Chairs Linden Chairs. 3 Sand Plates 3 X-Chairs.. 4 Rod Spacers.. 4 Type-A. 5 Sand
More informationEasylationWall. External Wall Insulation System. bringing european innovation
EasylationWall External Wall Insulation System bringing european innovation EasylationWall... the new External Wall Insulation System using brick slips for stunning façades. EXTERNAL WALL INSULATION (EWI)
More informationWORK SPECIFICATION BUILDING COMPONENT: STAIRCASE DENISA-MARIA BUCUROIU 4TH BK INTERNATIONAL
WORK SPECIFICATION BUILDING COMPONENT: STAIRCASE DENISA-MARIA BUCUROIU 4TH BK INTERNATIONAL Chapter : 1. Works specification Chap. Pg. : 1.-1/2 Contents Date : 12/05/2014 1. Contents 2. Extent 2.1. General
More informationExternal Reinforcement System
(Revised October 2013) Specifications of SMC Water Tank Product External Reinforcement System DOHA INDUSTRY CO., LTD. Table of Contents 1. General Matters A. Scope of Application B. Product Requirements
More informationSchöck Isokorb Structural Thermal Break. Schöck Isokorb Structural Design
Schöck Isokorb Schöck Isokorb Products Schöck Isokorb Structural Design Schöck Isokorb Installation 7 Schöck Isokorb Thermal Insulation Thermal protection Minimizing our use of energy and natural resources
More informationFirestone UltraPly TPO The light colored roofing choice
TM Firestone UltraPly TPO The light colored roofing choice TPO Roofing Systems Firestone UltraPly TPO roofing systems Firestone: over a century of experience Firestone Building Products entered the commercial
More informationRequirements for Measuring and Pricing of Structural Concrete
Requirements for Measuring and Pricing of Structural Concrete October 2016 TRANSPORT INFRASTRUCTURE IRELAND (TII) PUBLICATIONS About TII Transport Infrastructure Ireland (TII) is responsible for managing
More informationPRODUCT DATA SHEET SikaProof A
FULLY BONDED FPO SHEET MEMBRANE WATERPROOFING SYSTEM FOR BASEMENTS AND OTHER BELOW GROUND STRUCTURES DESCRIPTION is a fully and permanently bonded, selfadhesive, composite sheet membrane waterproofing
More informationGeneral Design Approval
General Design Approval Approval body for construction products and types of construction A public agency financed jointly by the Federal Government and the Länder Member of EOTA, UEAtc and WFTAO Date:
More informationIntroduction. Applications. Everest Facade Advantages
EVEREST FACADE Everest Façade with Endura Everest Industries Limited Introduction The Everest Commercial Facade System provides a versatile and durable façade which is suitable for an extensive range of
More informationLuka Quality Assurance Manual (Eng)
Luka Quality Assurance Manual (Eng) Contents: 1 General... 3 1.01 Foreword... 3 2. Quality assurance standards for air ducts... 4 A.1.00 Rectangular galvanised steel ducts... 4 A.2.00 Embedded galvanised
More informationSmarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
More informationPRODUCT DATA SHEET. SikaFuko Eco-1 PRODUCT- DESCRIPTION. Re-injectable hose for sealing construction joints in watertight structures
PRODUCT DATA SHEET SikaFuko Eco-1 Re-injectable hose for sealing construction joints in watertight structures PRODUCT- DESCRIPTION USES PRODUCT CHARACTERISTICS TESTING & APPROVALS Re-injectable hose system
More informationISOPRO Thermal insulation elements DIN EN
ISOPRO Thermal insulation elements DIN EN 1992-1-1 For balconies and thermally isolated external components ISOPRO made in Germany ISOPRO insulating to the highest standard ISOPRO Oslo Helsinki Moscow
More informationPRODUCT DATA SHEET. SikaFuko VT PRODUCT- DESCRIPTION
PRODUCT DATA SHEET SikaFuko VT Re-injectable hose system with integral valves for sealing construction joints in watertight concrete structures PRODUCT- DESCRIPTION USES PRODUCT CHARACTERISTICS TESTING
More informationStylite. T-Beam Suspended Floor Insulation Technical Datasheet. Stylite T-Beam Floor Insulation
T-Beam Floor Insulation Lambda from 0.030 W/mK Reduces cold bridging Lightweight Cost effective Can be used on all suspended floors Quick & easy installation Use in commercial & residential property Minimal
More informationcornish concrete products Crosswall Construction low carbon fast track buildings
cornish concrete products Crosswall Construction low carbon fast track buildings / Basements / double walls / crosswall / Thermofloor / Thermowall / Stairs Introduction What is thermal mass? 30 o C Comfort
More informationAGRUSAFE CONCRETE PROTECTIVE LINERS
AGRUSAFE CONCRETE PROTECTIVE LINERS Worldwide Competence in Plastics AGRU - Competence in Plastics AGRU Kunststofftechnik GmbH is a successful, Austrian family business with worldwide activities in production
More informationReinforced concrete double walls
Reinforced concrete double walls HOW YOUR BUILDING WORKS TAKES PLACE FASTER WHILE YOUR COSTS REMAIN LOW DOUBLE WALLS Strength in building technology The Kerkstoel reinforced double walls consist of two
More informationAccording German Standard DIN part 1. Standard range of PVC-P based flexible waterstops for movement (expansion) and construction joint sealing
Product Data Sheet Edition 08/08/2014 Identification no: 02 07 03 50 330 0 000001 Sika Waterbar PVC-P Sika Waterbar PVC-P According German Standard DIN 18541 part 1 Standard range of PVC-P based flexible
More informationConstruction. Injectable Hose for Sealing Construction Joints in Watertight Structures. Product Description. Tests. Product Data
Construction System Product Data Sheet Edition: 03/09/2013 Identification no: 02 07 03 07 010 2 000099 Version: GCC Injectable Hose for Sealing Construction Joints in Watertight Structures Product Description
More informationSGL2100 Sliding Systems
SGL2100 Sliding Systems High Performance Thermally Broken Sliding System Reference Brand: Sapa Building System Confort 160 Lift and slide GENERAL DESCRIPTION Thermally insulated sliding door system with
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ITEM 03100 CONCRETE FORMWORK 1.0 GENERAL 1.1 DESCRIPTION This section defines requirements and limitations for design, construction, erection, and removal of concrete formwork for
More informationExterior Wall Solutions Building Shell
A strong, water tight and thermally insulated building shell will ensure the buildings sustainability of usage over time. The Exterior Shell is the most important factor of protection to ensure that the
More informationTECHNICAL EVALUATION REPORT No. 27/2008/2060
TECHNICAL EVALUATION REPORT No. 27/2008/2060 Sheet 1 of 16 Sheets This report is a correct record of the measurements and observations made. The report is intended for the private information of those
More informationWATERPROOFING CONSTRUCTION JOINTS
WaterproofingSystems WATERPROOFING CONSTRUCTION JOINTS Area waterproofing Backing rod KÖSTER Joint Sealant FS-H KÖSTER FS Primer 2C Contents Basics Connective, loadable and resilient: Joints in building
More informationHIGH PERFORMANCE REINFORCEMENT PRODUCTS. Product Catalogue.
HIGH PERFORMANCE REINFORCEMENT PRODUCTS Product Catalogue www.hrc-europe.com HRC and its product philosophy The use of T-headed bars in concrete structures has some remarkable benefits compared to the
More informationProduct Data Sheet SikaFuko Swell-1 Positioning Description Uses Advantages Approval / Standards Construction Product Data Packaging
Product Data Sheet Version Nos.: 0414 SikaFuko Swell-1 Hydrophilic, swellable hose for sealing construction joints in watertight structures Construction Positioning Description Uses Swellable and injectable
More informationThe Art of Construction and The Design. Direct, rebar chair.
The Art of Construction and The Design Direct, rebar chair. Prefabricated element, made out of a thin steel rebar with plastic tipped legs in order to prevent corrosion of the support area between the
More informationNew Veneers Allow Greater Flexibility
New Veneers Allow Greater Flexibility A number of new veneer systems are being used with exterior insulation or standard insulation batts to create panels that are easily applied, provide outstanding insulation
More informationSheet Metal Protective Films
Sheet Metal Protective Films Protective films manufactured by R-FOLL based on an adhesive polyethylene film are designed for protecting surfaces from mechanical and chemical damage. Our films form a temporal
More informationThe TKI success kit. The excellently thought-out aluminium profi le system for windows, doors and façades.
The TKI success kit The excellently thought-out aluminium profi le system for windows, doors and façades. Presented by MKF Metallbaukontor Frankfurt GmbH More than 40 years of excellent system engineering
More informationfischer Test Report Fixing Tests for Bison Hollow Core Slabs
fischer Test Report Fixing Tests for Bison Hollow Core Slabs Testing on Bison Hollow Core Slabs 1. Introduction Contents Test Parameters Bison Hollow Core Slab Information 2. Fixings Products Tested FISV
More informationConstruction. Fully bonded FPO sheet membrane waterproofing system for basement and other below ground structures. Product Description.
Product Data Sheet Version 2014-05-27 Identification no: 020704103000000001 SikaProof A SikaProof A Fully bonded FPO sheet membrane waterproofing system for basement and other below ground structures Construction
More informationInjectable hose for sealing construction joints in watertight structures
System Product Data Sheet Edition 2011-11_1 Injectable hose for sealing construction joints in watertight structures Construction Product Description Uses Characteristics / Advantages Tests Approval /
More informationPRODUCT DATA SHEET. SikaProof A
PRODUCT DATA SHEET FULLY BONDED FPO SHEET MEMBRANE WATERPROOFING SYSTEM FOR BASEMENT AND OTHER BELOW GROUND STRUCTURES (ONLY TO BE APPLIED BY A SIKA APPROVED CONTRACTOR) PRODUCT DESCRIPTION SikaProof A
More informationSliding Door Systems
Sliding Door Systems Standard Sliding System Reference Brand: Sapa Building System Plaisance 24 GENERAL DESCRIPTION Sliding window and door system with a frame depth of 50 mm (two rail version), 97mm (three
More informationTECHNICAL MANUAL. MODIX Rebar Coupler Safe and Flexible Rebar Coupling System
TECHNICAL MANUAL MODIX Rebar Coupler Safe and Flexible Rebar Coupling System Version: PEIKKO GROUP 01/2016 MODIX Rebar Couplers Safe and flexible rebar splicing system Reduces congestion of reinforcement
More informationSection 1 - Introduction 1.1 Introduction Welcome to Fox Blocks. You have made an excellent decision to use Fox Blocks Insulated Concrete Forms (ICFs)
Section 1 Introduction 1.1 Introduction 1.2 Company History 1.3 Description of General Types of ICF Wall System Products 1.4 Description of Fox Blocks ICF Wall System Products 1.5 The Fox Blocks Clever
More informationSilverSeal CEMproof EasySeal is a light-weight waterproofing system for the use of any watersealing
CEMproof SilverSeal CEMproof SilverSeal active SilverSeal swelling non-woven, laminated with PE-membrane. SilverSeal is a light weight, swelling, water-reactive, selfhealing sealing membrane. SilverSeal
More informationSPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details
More informationWaterproofing Products for UNDERGROUND STRUCTURES
Waterproofing Products for Underground structures level: the parts of a building which are most often in contact with water and aggressive elements in the ground. All structures below ground level come
More informationPRODUCT SPECIFICATIONS FOR PRODUCTS AND MATERIALS. Numerical Listing
S FOR PRODUCTS AND MATERIALS Numerical Listing WSA PS 200 WSA PS 201 WSA PS 202 WSA PS 202S Ductile Iron Pipes (CIOD) for Pressure Applications - Water Supply and Sewerage Ductile Iron Fittings (CIOD)
More informationVisqueen Gas Barrier STRUCTURAL WATERPROOFING AND GAS PROTECTION SYSTEMS. CE Mark to EN 13967
LAST UPDATED: 27.10.2014 Page 1 of 6 BBA approved. Low permeability to methane, radon and carbon dioxide. Approved for use in NHBC Amber 2 applications. Multi-layer reinforced LDPE membrane with aluminium
More informationFRANK Puddle Flanges. The Original. Geosynthetics
FRANK Puddle Flanges The Original Geosynthetics 2 FRANK Puddle Flanges FRANK puddle flanges The original In the early 1980s, FRANK developed and patented the FRANK puddle flange, a sealing system in use
More informationBS EN :2004 EN :2004 (E)
Contents List 1. General 1.1 Scope 1.1.1 Scope of Eurocode 2 1.1.2 Scope of Part 1-1 of Eurocode 2 1.2 Normative references 1.2.1 General reference standards 1.2.2 Other reference standards 1.3 Assumptions
More informationPrestressed Hollowcore Slabs PRECAST CONCRETE SOLUTIONS.
PRECAST CONCRETE SOLUTIONS Prestressed Hollowcore Slabs HOLLOWCORE: THE CONCEPT Hollowcore slabs are prestressed concrete elements that have a constant cross section. They are manufactured using high tensile
More informationPrestressed Concrete Tanks. Design & Construction
Prestressed Concrete Tanks Design & Construction The PRELOAD Advantage PRELOAD has maintained a focused vision on designing and constructing the highest-quality and most-durable liquid storage tanks for
More informationReinforced edge channels KE-200
Drainage with system Reinforced edge channels KE-00 SERVICE ANRIN provides custom solutions and possibilities for the contract business. Here you benefit from reliable cooperation with our technical office
More informationEnjoy some peace and silence and the satisfaction of your customers by using MÜPRO s special vibration control products
Vibration control Enjoy some peace and silence and the satisfaction of your customers by using MÜPRO s special vibration control products Even today, the most expensive defects in buildings are still those
More informationSwellable joint sealing profiles
Product Data Sheet Edition 01/06/2007 Identification no: 02 07 03 07 001 0 000005 Swellable joint sealing profiles Construction Product Description Uses Characteristics / Advantages Tests Sealing profiles
More informationConstruction. Hydrophilic, swellable hose for sealing construction joints in watertight structures. (formerly Sika Injectoflex HPM)
System Product Data Sheet Edition 06/12/2010 Identification no: 02 07 03 07 010 2 000099 (formerly Sika Injectoflex HPM) SikaFuko Swell 1 (formerly Sika Injectoflex HPM) Hydrophilic, swellable hose for
More informationSchöck Isokorb type KS
Schöck Isokorb type Schöck Isokorb type Fig. 1: Schöck Isokorb type Schöck Isokorb type Suitable for cantilevered steel balconies and canopies. It transfers negative moments and positive shear forces.
More informationXtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade)
CERTIFICATE NO. 03/0183 DETAIL SHEET 1 Xtratherm Thin-R Partial Fill Cavity Wall Board (XT/CW Grade) PRODUCT DESCRIPTION This Detail Sheet relates to Xtratherm Thin-R Partial Fill Cavity Wall Board, as
More information