A.H. Harris & Sons, Inc. Formwork and Shoring Solutions
|
|
|
- Heather Mathews
- 6 years ago
- Views:
Transcription
1 A.H. Harris & Sons, Inc. Formwork and Shoring Solutions For over 60 years, A.H. Harris has been a leading supplier of vertical and horizontal formwork and shoring solutions for the entire construction industry.
2 Harris Ply System The Harris Ply System is the most popular engineered, factory-built, reusable concrete forming system in use today. Made in USA Imperial dimension panels available in 90 different sizes Heavy duty panel construction 70 KSI steel frames 9 ply birch high density birch plywood Harris has been in the Construction industry since 1916, providing innovative solutions, quality products and professional services. Since 1950 Harris has been a leading supplier of concrete formwork and shoring equipment. We offer a complete line of vertical and horizontal formwork solutions for the entire construction industry p.s.f. concrete pour pressure rating No top or bottom Interchangeable panel orientation Accelerated learning curve Lightweight system Easily handled and erected Weighs 5 lbs. per sq. ft.
3 Harris 1500 Clamp System Now Available! 8 X 8 and 8 X 4 Panels Minimal tie and connection hardware Four ties required for an 8 x 8 panel Three clamps required per vertical & horizontal joint Stand alone panel with integral steel tube waler Does not require adjacent panel for tie hardware support Reduced stacking hardware Only two multi walers required per horizontal joint when stacking panels Gang form capability Large gangs can be assembled and picked The Harris 1500 concrete forming system is a modular design suitable for handset or gang form applications. Made in USA by AH Harris All imperial width & height dimension panels with no top or bottom --- greatly reduces the jobsite learning curve 1,500 p.s.f. rated pour pressure --- means a more rugged form system that allows faster pours and more productivity Quickly assembled --- only three clamps per 8 panel vertical joint Easily ganged --- panels can be manhandled and assembled into gangs on the ground without the use of a machine Multi walers reduced --- no multi walers required for 2-panel stack gangs Consistent concrete finish --- high density HDO plywood faces and a state of the art AH Harris reconditioning facility assures a reliable, consistent concrete finish from project to project
4 Harris Steel Frame Shoring Harris Steel Frame Shoring is designed and engineered for the maximum application and strength. Heavy duty Shoring Frames balance strength with versatility. Heavy Duty load capacity 10,000 lb. safe working load rating per leg Large frame spacing W8 x 10 steel stringers allow greater spans Lightweight aluminum or H20 joists for optimal strength to weight ratio Adjustable post shores Adjusts to floor heights 5-7 to 18-0 The Best Forming & Shoring Team in the Industry! Formwork & Shoring Sales Specialists will analyze your project and develop a formwork solution that is economical, efficient and safe. Forming & Shoring Technical Group makes sure the finer details of your project needs are addressed. Field Service Technicians are highly trained professionals that have years of experience assembling and cycling formwork and shoring.
5 XPS60 Shoring System The XPS60 Shoring System is a modular design suitable for handset or gang form applications. The system is versatile, lightweight and extremely powerful. Large load capacity high strength system 60,000 lb. working load per leg rating Towers can be assembled horizontally on the ground Modular versatility Frame sizes 4, 6, 8 & 10 Leg sizes 4, 6, 8, & 10 No loose nuts & bolts Lightweight components Heaviest component weighs 150 lbs. Ischebeck Megashore Heavy duty leg capacity 22,000 lb. safe working load rating per leg Lightweight aluminum components Easily handled and assembled by one man Versatile modular system Four basic components for fast erection & dismantling 3-9 screw jack adjustment Self-squaring & self-aligning frame to leg connection Can be assembled horizontally and set in large tower sections Ischebeck HV Slab Forming System Can be adapted to fit many plan layouts with just four main components: Main beam Secondary beam HV panel Drop-head Combines the advantages of panel, beam and drop head slab formwork Safe working: erecting and stripping formwork from a safe position below
6 MEVA Imperial HD Clamp System Meva Systems feature feet and inch dimensions, flexible modular panel configuration, fast setup and takedown, high strength, moisture-proof facing material and a host of design features that give it real benefits in use. The highest industry pour pressure rating - 2,025 p.s.f. - allows faster placement and lower labor costs. ALKUS composite form face produces a consistent, flat concrete finish and can be easily repaired or patched. 12' x 8' panels reduce assembly and disassembly labor and produce less form joints, reducing joint remediation labor. No nuts and bolts are required, only a hammer is needed. Imperial dimension panels have no top or bottom: Panels are symmetrical, eliminating confusion on jobsite Imperial dimensions eliminate the metric learning curve Panels can be stacked in any configuration Dywidag threaded profile inserts attach with a simple flange screw which eliminates multiple components. MEVA Arcus Circular Formwork True radius with variable adjustment Adjustment range 9 to flat orientation Utilizes standard MEVA Imperial accessories Easy panel to panel connection with MEVA panel clamp Clamps to standard MEVA form panel
7 MEVA KLK Jump Bracket System The roll-back system allows jumping the formwork and the platform as a unit which guarantees safety and saves time. The carriage can be slid back by 2-3 which provides enough working space for cleaning and rebar installation. Versatile bracket design Can be used for work platform and roll-back applications Heavy duty bracket can support formwork heights to 24 Large gang sections can be moved in one lift MEVA STB One Sided Support Frame The support frames are mainly used for pouring against existing structures (walls, rock, soil, sheet piling, foundations etc.) if only one side of the formwork can be erected. Modular sections Adjustable heights from 4-9 to 40-0 Small footprint frame units Fits standard width truck with no oversize loads Ideal for narrow width site conditions
8 Harris, HarMac & Kenseal 52 Locations from Maine to North Carolina - And Growing! Visit ahharris.com for current news and events. A.H. HARRIS CONNECTICUT ENFIELD 1559 King Street (860) NEW HAVEN 102 Wheeler St (203) NEWINGTON 91 Holmes Rd (860) STAMFORD 226 Selleck St (203) MAINE AUGUSTA 23 Leighton Rd (207) BANGOR 284 Perry Rd (207) PORTLAND 14 Rainmaker Dr (207) MASSACHUSETTS AUBURN 275 Washington St / Rt 20 (508) BOSTON 420 E Street (617) HARMAC REBAR & STEEL MAINE FRYEBURG 103 Cornshop Road (207) CHICOPEE 323 Meadow St (413) EAST WAREHAM 3131 Cranberry Hwy (508) PLAINVILLE 6 Commerce Blvd (774) WESTFIELD 287 Lockhouse Rd (413) WOBURN 291 Salem St (781) NEW HAMPSHIRE MANCHESTER 701 E Industrial Park Dr (603) PORTSMOUTH 255 West Rd (603) WEST LEBANON 17 Plaza Heights Rd (603) NEW JERSEY FAIRFIELD 160 Fairfield Rd (973) PARLIN 287 Cheesequake Rd (732) KENSEAL CONSTRUCTION PRODUCTS CONNECTICUT WEST HAVEN 673 First Avenue (203) MARYLAND BALTIMORE 2960 Washington Blvd (410) BELTSVILLE Bacon Dr (301) MASSACHUSETTS BOSTON 474 Dorchester Ave (617) NEW JERSEY PARSIPPANY 799 Edwards Rd (973) NEW YORK BRONX 552 South Fulton Ave (914) NEW JERSEY SAYREVILLE 301 Hartle Street (732) NEW YORK ALBANY 17 Commercial Ave (518) ARDSLEY 425 Saw Mill River Rd (914) BROOKLYN 382 Hamilton Ave (718) BUFFALO 6515 Transit Rd (716) HENRIETTA 1140 Lehigh Station Rd (585) MASSENA 30 Hill St (315) PLATTSBURGH 63 Trade Rd (518) QUEENS Second St (718) ROCK TAVERN 165 Stone Castle Rd (845) SYRACUSE 106 Boss Rd (315) BROOKLYN 18-20th Street (718) LONG ISLAND CITY Borden Ave (718) PENNSYLVANIA PHILADELPHIA 1540 Delmar Dr (610) NORTH CAROLINA CHARLOTTE 2217 Dist Center Dr Suite A (704) NORTH CAROLINA CHARLOTTE 5900 W WT Harris Blvd (704) PENNSYLVANIA WHITEHALL 1139 Lehigh Ave, Unit 700 (610) RHODE ISLAND CRANSTON 30 Freeway Dr (401) VERMONT WILLISTON 294 Boyer Circle (802) VIRGINIA BRISTOL 2413 Lee Hwy (276) CHARLOTTESVILLE 1215 East Market St (434) CHESAPEAKE 1708 Lambert Ct (757) RICHMOND 2405 Hermitage Rd (804) ROANOKE 3535 Brandon Ave S (540) RALEIGH 2539 Noblin Rd (919) VIRGINIA CHANTILLY 3933 Avion Park Ct Unit B114 (703) NORFOLK 1301 Ingleside Rd (757)
FrameFast Shoring System
FrameFast FrameFast Shoring System The FrameFast shoring system is engineered for maximum strength, labor productivity and reuse capabilities. FrameFast components feature high strengthto-weight ratios.
Aluminum Beam Gang System
Aluminum Beam Gang Aluminum Beam Gang System Symons Aluminum Beam Gang Forming System offers computer-optimized aluminum beams with an extremely high strength-toweight ratio. The unique beam attachment
P: F: Resi-Ply FORMING SYSTEM BY DAYTON SUPERIOR
Resi-Ply FORMING SYSTEM BY DAYTON SUPERIOR Resi-Ply System The Resi-Ply forming system is a 1 1 thick plywood with steel backing bars designed especially for residential foundations and low industrial
HANDSET WALL FORM. Handset Wall Form. Quick Assembly - can be built using only a hammer. Reduced weight increases productivity
HANDSET WALL FORM Quick Assembly - can be built using only a hammer Reduced weight increases productivity Unsurpassed flexibility in design and availability of panels for a wide variety of applications
Components. Jacks 2 Leg Assembly. Jacks. Typical Frame
ShorFast Components ShorFast Leg Assembly The ShorFast legs are manufactured entirely from aluminum. The body is extruded with four large keyways to accept ShorFast Frames and provides a positive rigid
Elevated Slab Sequence
Elevated Slab Sequence The following group of photos shows the sequence for installa4on of a one- way elevated slab. (Slab & Beam with Reinforcing & Post- Tensioning) Columns Placed & Form Support (Scaffolding)
Smarter. Safer. Leaner.
Smarter. Safer. Leaner. Fast Installation and Removal Decrease Leading Edge Exposure by 87% OSHA Compliant Versatile and Reusable Use Perimeter Protection Posts During Construction: At Building Perimeter
MEGALITE Medium duty steel panel formwork in imperial sizes
MEGALITE Medium duty steel panel formwork in imperial sizes // Light, durable, Handset Forming // Table of contents Features Advantages Solutions Basic components 2 4 5 7 // Features Modular wall and column
Alternate Formwork System Evaluation
Alternate Formwork System Evaluation Executive Summary The current handset aluminum formwork system used in the Navy League Building s parking garage is a labor and material (plywood) intensive process.
Standards for Testing and Rating Shoring Equipment
ANSI/SSFI SH300-2007 American National Standard Standards for Testing and Rating Shoring Equipment Scaffolding, Shoring & Forming Institute, Inc. Sponsor: Scaffolding, Shoring & Forming Institute, Inc.
Titan HV panel decking system from
Titan HV panel decking system from Virtually no plywood required Drop-head allows early striking Main components erected from below All components man handleable Titan HV panel decking system The Titan
SLIDE RAIL SHORING SYSTEMS
SLIDE RAIL SHORING SYSTEMS THE LEADING PRODUCER & DISTRIBUTOR OF TRENCH SHIELDING & SHORING EQUIPMENT SINCE 1995 Pro-Tec Equipment Slide Rail Shoring Systems What is Pro-Tec Equipment s Slide Rail? The
Bonner Bridge Replacement Update:
Bonner Bridge Replacement Update: Jerry D. Jennings, PE - NCDOT Division 1 Engineer Pablo A. Hernandez, - NCDOT Resident Engineer September 18, 2017 Bonner Bridge Replacement Timeline Refresher Bonner
Noetop is a versatile, robust integrated formwork panel system. The basic panels incorporate the strongbacks and
NOEtop Noetop is a versatile, robust integrated formwork panel system. The basic panels incorporate the strongbacks and walers into one timber faced panel. The panel range provides economic forming with
PACIFIC SHORING, LLC ALUMINUM SHORING PRODUCTS PSH HYDRAULIC STRUT. TABULATED DATA Effective December 10, 2013
1 Effective December 10, 2013 PSH 265 Roberts Avenue Santa Rosa, Ca. 95407 (707) 575-9014 Construction Engineering Resource 1837 Wright Street Santa Rosa, Ca. 95404 jmtengr2@aol.com (707) 484-4704 2 Contents
Aluma EasySet Continuing Innovation from Aluma S ystems
Product Sheet Aluma EasySet Aluma Systems Concrete Construction Aluma EasySet Continuing Innovation from Aluma S ystems Introduction With more than 35 years of experience in shoring and formwork, Aluma
PERFORM WITH PRECISION BOX CULVERT TRAVELER CONCRETE CONSTRUCTION PRODUCTS APPLICATION GUIDE
PERFORM WITH PRECISION BOX CULVERT TRAVELER CONCRETE CONSTRUCTION PRODUCTS APPLICATION GUIDE A WORD ABOUT SAFETY High productivity depends on safety; even a minor accident causes job delays and inefficiency,
DIVISION 03 CONCRETE SPECIFICATION : FORMS AND FORMWORK
DIVISION 03 CONCRETE SPECIFICATION 031000: FORMS AND FORMWORK PART 1.0 GENERAL 1.1 DESCRIPTION The work of this specification includes furnishing of all labor, materials, equipment and incidentals to install,
INNOVATION IN PROP DESIGN. For propping enquiries Australia wide call:
Propping Equipment INNOVATION IN PROP DESIGN A leader in innovative design, Coates Hire has designed the Universal Prop System 30 and 60 to meet challenging applications. Able to prop up to 30 and 60 tonne
APPLICATION GUIDE PERFORM WITH PRECISION
APPLICATION GUIDE PERFORM WITH PRECISION APPLICATION GUIDE TABLE OF CONTENTS A Word about Safety...1 General Shoring Safety Rules... 2 Single and Independent Post Shore System Safety Rules... 4 General
REINFORCING TABLES INSTALLATION MANUAL
REINFORCING TABLES 201 REINFORCING TABLES Design Limitations Introduction The structural wall reinforcing and lintel design tables contained within the Appendix of NUDURA s Installation Manual have been
Universal Panels & Accessories
Universal Panels & Accessories Erection Procedures INTRODUCTION Use common sense when working with Scaffold Your Safety is our #1 Concern Universal Scaffolds are designed with your safety in mind every
User Guide MEGALITE 01FDL34
User Guide MEGALITE 01FDL34 IMPORTANT: Any safety provisions as directed by the appropriate governing agencies must be observed when using our products. The pictures in this brochure are snapshots of situations
Contents of my presentation
1 Design and Techniques for Safety in High Rise Buildings- Focus on Temp. Structures-Formwork Dr. Kumar Neeraj Jha Department of Civil Engineering Indian Institute of Technology Delhi Email: knjha@civil.iitd.ac.in
CONCRETE FORMWORK CHECKLIST AT SITE
CONCRETE FORMWORK CHECKLIST AT SITE Concrete formwork is a temporary supporting structure for concrete when it is placed at the construction site to keep the concrete in position and shape till it gets
Introduction. Estimated length: 30 minutes Audience: construction workers
Introduction Scaffold User Training Welcome! The purpose of this Click Safety course is to provide instruction for basic safety provisions when using scaffolds in construction activities. Estimated length:
PERI PD 8 The cost-effective shoring for slab tables and high loads
PERI PD 8 The cost-effective shoring for slab tables and high loads Edition 06/2010 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)7309.950-0 Fax +49 (0)7309.951-0
Pick Smarter. Pick Better. Pick UNEX. MODULAR FLOW-THROUGH WORK STATIONS FOR ASSEMBLY AND LINESIDE STORAGE
MODULAR Pick Smarter. Pick Better. Pick UNEX. FLOW-THROUGH WORK STATIONS FOR ASSEMBLY AND LINESIDE STORAGE UNEX Flow Cells keep processes and profits flowing Accelerate productivity. Improve Ergonomics.
How to Construct a Feral Enclosure
How to Construct a Feral Enclosure by Bob Breeze For questions and further information: bob.breeze@gmail.com April 2016 Please note, this is a living document. If you need further information or would
CITY OF FARGO SPECIFICATIONS SIGNING
SIGNING PART 1 DESCRIPTION OF WORK The work to be done under this section of the Specifications and the accompanying plans consists of furnishing all labor, material and accessories necessary to complete
www.fastformsystems.com info@fastformsystems.comm South Tel: 00 44 (0) 207 1481274 North Tel: 00 44 (0) 8456 171152 Fast-Form The Complete Formwork system Safer / Faster / Greener / Cheaper One system,
1. Cast-in-place concrete is specified in Section
SECTION 03 38 00 PART 1 - GENERAL 1.01 DESCRIPTION A. This Section describes the requirements for furnishing and installing post-tensioned slabs, jacks, jacking and anchors at Parking Structure, and record
PRODUCT BROCHURE. RMD Kwikform United Kingdom. Minima
RMD Kwikform United Kingdom Minima Product Overview Faster Efficient tie hole positioning reduces the number of ties required, lowering costs and construction times. Modular components reduces the time
H 12 Heavy Duty Modern Tripod 8 Seat Swing Heavy Duty Hangers
Page 1 IMPORTANT Please retain this instruction sheet in your files. It contains important replacement parts information. All equipment should be installed in accordance with these instructions. It is
SECTION PLATE CONNECTED WOOD TRUSSES
SECTION 06173 PLATE CONNECTED WOOD TRUSSES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Shop fabricated wood trusses for roof and floor framing. 2. Bridging, bracing, and anchorage. B. Related Sections:
THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK
THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK or our breadth of capability. Of all the storage tank manufacturers doing business today, no other offers Caldwell s range of capability. We are the only manufacturer
A-Series Aluminum Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 A-Series Aluminum Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an A-Series Gantry Crane into a competitive bid project or
Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi
STRUCTURAL NOTES MATERIAL STRENGTHS Structural Steel Reinforcing Steel Concrete Masonry Structural Lumber Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel
Brace Badger Helical Anchor System. MB Badger Advantages Installation Requirements MB Super Braces Brace Attachment Criteria.
Brace Badger Helical Anchor System MB Badger Advantages Installation Requirements MB Super Braces Brace Attachment Criteria MB BRACE BADGER HELICAL ANCHOR SYSTEM There are times in tilt-up construction
E-Series Steel Gantry Crane
SPANCO PRODUCT SPECIFICATIONS 1 E-Series Steel Gantry Crane This guide can be used to prepare a bid specification for the incorporation of an E-Series Gantry Crane into a competitive bid project or application.
SELF-CLIMBING SYSTEMS
High efficiency for highrise construction Table of content ATR Self-climbing system RKS Rail climbing system HWS Perimeter safety screen Basic components 8 11 14 ATR Self-Climbing Systems Features Formwork
SECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
(c) Presentation of Information. Information is presented in several forms as follows:
CONSTRUCTION SEQUENCE FOR TIMBER SHORING FOR TRENCHES (a) Scope. This appendix contains information that can be used when timber shoring is provided as a method of protection from cave-ins in trenches
AISC Steel & Timber Research for High-Rise Residential Buildings
AISC Steel & Timber Research for High-Rise Residential Buildings Final Report December 4 th, 2017 SOM Designed Benchmark Concrete Building Skidmore, Owings, and Merrill, LLP 2017 224s Michigan Avenue Suite
Mammut XT. Mammut XT. New
Mammut XT Mammut XT New Choose. Set. Done: Tie from One Side. Or Both! The new wall formwork system for civil engineering and architectural construction Tieing from one side only can be an advantage when,
BoSS Climalite Camera and lighting tower
Contents Safety First Safety First Quantity Schedules Toeboard 2 9 13 33 INTRODUCTION Please read this guide carefully. Please note that diagrams are for illustrative purposes only. User guides are also
FIBERGLASS DECKING SYSTEMS
EXCLUSIVELY FIBERGLASS DECKING SYSTEMS SAFPLANK, SAFPLANK HD, SAFDECK, STRONGDEK SAFPLANK SAFPLANK HD SAFDECK STRONGDEK SAFPLANK Interlocking Decking System SAFPLANK panels are used as air-tight drainage
Motto. History CSE CSE
SOLUTIONS ENGINEERED SOLUTIONS ENG INEERED SOLUTIONS ENGINEERED SOLUT IONS ENGINEERED SOLUTIONS ENGINEERE D SOLUTIONS ENGINEERED SOLUTIONS E NGINEERED SOLUTIONS ENGINEERED SOL UTIONS ENGINEERED SOLUTIONS
Including RedForm LVL, RedForm-I65, I90 and I90H Joists. Lightweight for Fast Installation. Compatible with Standard Framing
FORMING AND SHORING Including RedForm LVL, RedForm-I65, I90 and I90H Joists Lightweight for Fast Installation Compatible with Standard Framing Available in Long Lengths Uniform and Predictable Resource-efficient
Fast-Form The Complete Formwork Solution www.fastformsystems.com www.sheetpilecappingsystem.co.uk www.roadforms.com www.formwork-sales.com Safer / Faster / Greener / Sustainable 'One system, endless possibilities'
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes
NPCA Precast Learning Lab. Dunnage, Loading & Shipping. Precast Show 2017 NPCA 1
NPCA Precast Learning Lab What is it? A new library of short, educational videos What can I learn? Topics cover production best practices and sales and marketing How many videos are available? Four videos
Tabulated Data Waler Rails
Tabulated Data Waler Rails Revised June 1, 1999 Copyright, U.S.A.,Griswold Machine & Eng., Inc., 1998 594 West Highway M-60, Union City, MI 49094 (800) 248-2054 Fax: (517) 741-7483 CAUTION EXCAVATION PROCEDURES
Maximize Your Space. Mezzanines are ideal for:
www.vertispace.ws Maximize Your Space Worker productivity and manufacturing efficiencies are under constant scrutiny in today s business world. Whether you re an operations manager charged with expanding
Concrete Framing systems. Design choices. Basic flavors
Concrete Framing systems Design choices Site Cast Concrete gives a designer a lot of freedom in the design and construction of walls, columns and surface textures. When it comes to spanning, concrete offers
easy formwork system
easy formwork system Ponteggi Edilponte S.p.A. was created in 1963 in a small building in Povegliano Veronese. Thanks to the experience acquired in more than 40 years of activity in the national and international
JORACK. Storage Solutions from Design to Installations.
JORACK Storage Solutions from Design to Installations Profile Jorack, the range of Industrial racks from Josts is a perfect storage solution for all types of items, as the design allows the span to be
W. Mark McGinley March 3, 2016 ISEA MEETINGS 1
J.B. SPEED SCHOOL OF ENGINEERING Design of s for Masonry Veneers W. Mark McGinley, Ph. D., PE FASTM MASONRY DAY Indianapolis March 3, 2016 Objectives Present a Brief Overview of: Masonry Veneer Wall systems
Industrial Shelving. Q Line, Z-Line/Steel Shelves, Bulk Storage and Heavy-Duty Reinforced Shelving SYSTEMS FOR SUCCESS
Industrial Shelving Q Line, Z-Line/Steel Shelves, Bulk Storage and Heavy-Duty Reinforced Shelving Q Line & Z-Line/Steel Shelving Heavy Duty Reinforced Shelving & Bulk Storage Shelving 2 Industrial Shelving
all VAC LIFT ALL-VAC-LIFT Phone Redstart Street Fax
ergonomic vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production. HIGH
Cantilever Racking Store Any Size, Any Shape
Cantilever Racking Store Any Size, Any Shape Cantilever Racking Applications Cantilever Racking for Metal Tube & Piping Storage - 4 Very Narrow Aisle (VNA) Cantilever Racking - 5 Cantilever Roofs for Four-Season
Minimum Guidelines for the Design and Use of Underpins When Performing Foundation Stabilization and/or Supplementation UP-08
Minimum Guidelines for the Design and Use of Underpins When Performing Foundation Stabilization and/or Supplementation UP-08 Table of Contents 1. Title 2. Designation 3. List of Figures 4. Scope 5. Referenced
Modular Wood Framing Goes Vertical
Modular Wood Framing Goes Vertical By: Troy Bean, P.E., S.E. DCI Engineers January 2013 The Wood Products Council is a Registered Provider with. Credit(s) earned on completion of this program will be reported
Making space work for you...
Making space work for you... www.uaeshelving.com WE SPECIALISE IN Slotted Angle Shelving Drive-in Pallet Racking Bolt-Free Shelving Shuttle Racking Medium Duty Long Span VNA (Very Narrow Aisle) Mobile
Table of Contents.2. Introduction...3 Gravity Loading and Deflections..4. Existing Structural System..8
WISCONSIN PLACE RESIDENTIAL TECHNICAL ASSIGNMENT 2 OCTOBER 29, 2007 KURT KRASAVAGE THE PENNSYLVANIA STATE UNIVERSITY STRUCTURAL OPTION FACULTY ADVISOR: DR. ALI MEMARI 1 Table of Contents Table of Contents.2
CANTILEVER RACK SPECIFICATIONS PART 1 GENERAL 1.1 SCOPE 1.2 APPROVED MANUFACTURER 1.3 REGULATORY ORGANIZATIONS AND GROUPS 1.4 QUALITY ASSURANCE
CANTILEVER RACK SPECIFICATIONS PART 1 GENERAL 1.1 SCOPE This specification is intended to describe the general requirements applicable to a proper structural cantilever rack design. In addition, it is
Eric Alwine Structural Option George Read Hall The University of Delaware Dr. Boothby Technical Assignment #2 October 31, 2005 EXECUTIVE SUMMARY:
EXECUTIVE SUMMARY: THIS REPORT IS A COMPARISON OF ALTERNATE FLOOR SYSTEMS FOR GEORGE READ HALL. FOUR DIFFERENT SYSTEMS WERE DESIGNED AND COMPARED TO THE EXISTING HAMBRO FLOOR SYSTEM. THE FOUR SYSTEMS WERE
SOLVING SITE PROBLEMS WITH LANE STRUCTURAL PLATE PRODUCTS
SOLVING SITE PROBLEMS WITH LANE STRUCTURAL PLATE PRODUCTS ABOUT LANE ABOUT LANE Lane Enterprises specializes in partnering with cusmers from consultation installation provide highly engineered products
CFRP Strengthening and Load Testing of the Concrete Deck of I-10 KCS Railroad Overpass Mohsen Shahawy, Ph.D, PE SDR Engineering Consultants, Inc.
CFRP Strengthening and Load Testing of the Concrete Deck of I-10 KCS Railroad Overpass Mohsen Shahawy, Ph.D, PE SDR Engineering Consultants, Inc. SDR Engineering Consultants, Inc. 2260 Wednesday Street,
WHAT IS CANTILEVER RACK?
PRODUCT INFORMATION WHAT IS CANTILEVER RACK? 2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email info@snyderequipment.com www.snyderequipment.com MODERN EQUIPMENT COMPANY,
BEARING METAL STUD FRAMING
L-1 Section 05410 Long Form Specification LOAD BEARING METAL STUD FRAMING This section includes axially loaded steel studs, with unique slotted top channels, usually of 0.91, 1.2 and 1.5 mm (16, 18, or
GUIDE SPECIFICATIONS For STRUCTURAL PRECAST HOLLOW CORE SLABS SECTION 03410
GUIDE SPECIFICATIONS For STRUCTURAL PRECAST HOLLOW CORE SLABS SECTION 03410 Note to user: These guide specifications are provided by Mid- States Concrete Products as a service to you; they are NOT specific
Overturning Forces. 12 times 300 lbs = 3,600 lbs of shear force along top of wall. Shear Wall
2,400 lbs of compression Overturning Forces Overturning forces act on all shear walls. However, sometimes a shear wall will be subjected to very strong overturning forces that can damage the shear wall.
Com-Tray. Under Floor
Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting
ECNAMRFO ER P R FO ED EER IN G EN / S N TIO LU O S E G A R TO S
STORAGE PRODUCTS STORAGE SOLUTIONS / ENGINEERED FOR PERFORMANCE STORAGE SYSTEMS The Company Excel Storage Products, LP is one of the leading manufacturers of high quality industrial storage rack and mezzanine
Structural Design of Dam Sluice Gate Walkway Slabs: Retrofit and Replacement Options
Structural Design of Dam Sluice Gate Walkway Slabs: Retrofit and Replacement Options A local utility company issued a Request for Proposal to our university s capstone design class for structural improvements
Form Liners. Architectural Concrete. Form Liners
When it is time to choose concrete formliners, make your first choice Dayton Superior. For stock or custom orders, we have you covered. Choose from three product lines: TherMOform, Vinyltite and Elasto-TEX.
Moduline. Acoustic Enclosure System. Rugged Noise Control Structures Using Acoustically Rated & Field Proven Demountable Components
Moduline Acoustic Enclosure System Rugged Noise Control Structures Using Acoustically Rated & Field Proven Demountable Components Lab certified acoustic ratings Broad range of performance levels 63 Hz
SECTION TOILET COMPARTMENTS. A. Section Metal Fabrications: Concealed steel support members.
SECTION 10155 TOILET COMPARTMENTS PART 1 GENERAL 1.1 SECTION INCLUDES A. Plastic laminate partitions. 1.2 RELATED SECTIONS A. Section 05500 - Metal Fabrications: Concealed steel support members. B. Section
ES230 Strength of Materials Exam 6 - Compilation Prof. Kurtz, ES230 STRENGTH OF MATERIALS Exam 6 Wednesday, April 26, 2017, 7pm
Given Formulae Bending M/EI = 1/ = -y/ =My/I = E Beam Shear Stress = VQ/It q = VQ/I q = F/s Torsion I = ( /4)r 4 for a solid, circular shape of radius r Pressure Vessels hoop = Pr/t long = Pr/2t ES230
PACIFIC SHORING, LLC ALUMINUM SHORING PRODUCTS PSH. TABULATED DATA Effective December 10, 2013 RED
1 Effective December 10, 2013 PSH Construction Engineering Resource 265 Roberts Avenue Santa Rosa, Ca. 95407 (707) 575-9014 1837 Wright Street Santa Rosa, Ca. 95404 jmtengr2@aol.com (707) 484-4704 2 Contents
CITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT. Submittal Requirements
CITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT 1 East Franklin Street Phone: 301-790-4163 Third Floor Hagerstown, MD 21740 Fax: 301-791-2650 BUILDING PERMIT APPLICATION FOR RESIDENTIAL ACCESSORY
SJI Updates Expanded Load Tables for Noncomposite Joists / Joist Girders and Development of New Composite Joist Series
SJI Updates Expanded Load Tables for Noncomposite Joists / Joist Girders and Development of New Composite Joist Series SUMMARY David Samuelson Steel joists are growing in recognition as being a very economical
TERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B www.euroacc.co.uk Introduction The Terwa Parallel Threaded Coupler is a full bar strength system (the coupling is stronger
CTP STITCH-TIE AGAIN! Quick and easy way to re-anchor existing veneers to back-up structures.
Helical Wall Tie System for Stabilizing Veneers and Structural Repair AGAIN! ANOTHER CTP SOLUTION! CTP STITCH-TIE Quick and easy way to re-anchor existing veneers to back-up structures. Brick to Concrete
151 First Side. Technical Assignment 2 November 16 th, William J. Buchko. AE 481w Senior Thesis The Pennsylvania State University
November 16 th, 2007 William J. Buchko AE 481w Senior Thesis The Pennsylvania State University Thesis Advisor: Kevin Parfitt Table of Contents Executive Summary... 3 Structural System Overview Foundation...
Raised Basement. Mechanical Installation Guide
R Raised Basement Mechanical Installation Guide Ensure masonry work is correct. If recessed, the depth must be 14 inches deep unless otherwise specified for a custom application. Width and length may vary
Contents DESIGNER S STRUCTURAL PRODUCTS GUIDE. Tegral Purlins & Rails
DESIGNER S STRUCTURAL PRODUCTS GUIDE Introduction Contents Tegral Purlins & Rails Zeta Purlins & Rails Zeta Purlins page 8 Zeta Rails page 15 Zeta Purlin & Rail Cleats page 22 Zeta 2 Purlins & Rails Zeta
Trench Duct Class Catalog 5230CT9601R10/08
5230CT9601R10/08 2009 Class 5230 CONTENTS Application.................................................5 Unassembled Trench Duct Components.........................6 Factory Assembled Trench Duct..............................11
I-94/I-69 Interchange Bridge Construction
I-94/I-69 Interchange Bridge Construction General Project Information Let in August 2013 Cost of $76 million Prime Contractor Walter Toebe Construction Company Reconstruction of I-94 from Griswold to Lapeer
SECTION CLIMBING WALLS
SECTION 13120-1 PART 1 - GENERAL 1.1 SUMMARY A. This section includes the following: 1. Custom Climbing Wall. B. Related Sections 1. Section Structural Steel 2. Section Rough Carpentry 3. Finishes 1.2
CHAPTER 9 STAIR CASES 9.1 GENERAL FEATURES 9.2 TYPES OF STAIR CASES
CHAPTER 9 STAIR CASES 9.1 GENERAL FEATURES Stair cases are provided for connecting successive floors. It is comprised with flights of steps with inter mediate landings which provides rest to the user and
The Perfect Choice for Mezzanines in Custom Metal Buildings
The Perfect Choice for Mezzanines in Custom Metal Buildings Ecospan composite floor system. The Ecospan Composite Floor System is an innovative, simple, effective and economical method of providing all
In Service Replacement of Box Girder Bottom Slab
In Service Replacement of Box Girder Bottom Slab WSDOT Bridge No. 5/537S - Span 11 Craig R. Boone, P.E., S.E. Lynn Peterson Secretary of Transportation 2015 Western Bridge Engineers Seminar Reno, Nevada
Tips For Designing Constructable Concrete Buildings
Tips For Designing Constructable Concrete Buildings by Clifford Schwinger, P.E. The Harman Group, Structural Engineers King of Prussia, Pa. Structural Engineers Association of Ohio Annual Conference Presentation
GARAGES/ONE-STORY City of Grand Rapids Building Safety Division
GARAGES/ONE-STORY City of Grand Rapids Building Safety Division 218-326-7601 www.cityofgrandrapidsmn.com This handout is intended only as a guide and is based in part on the 2015 Minnesota State Building
Administrative Changes
Revised 11/29/06 Knox County Residential Building Codes Significant Changes From The 1995 CABO One And Two Family Dwelling Code To The 2006 International Residential Code All one and two family dwellings
PUSH-BACK. storage rack systems EXCEL STORAGE PRODUCTS EXCEL STORAGE PRODUCTS EXCEL STORAGE PRODUCTS EXCEL STORAGE
EXCEL STORAGE PRODUCTS EXCEL STORAGE PRODUCTS E X C E L S T O R A G E P R O D U C T S EXCEL STORAGE PRODUCTS EXCEL STORAGE PRODUCTS EXCEL STORAGE PRODUCTS EXCEL STORAGE PUSH-BACK XCEL STORAGE PRODUCTS
SECTION STRUCTURAL PRECAST HOLLOW CORE SLABS
PART 1 GENERAL 1.01 SCOPE OF WORK A. The Contractor shall furnish all labor, materials, equipment and incidentals to provide a complete structural precast hollow core slab system as shown on the Contract
built build to FORMWORKS CLIMBING, RETAINING WALLS, SPECIAL
uilt build to FORMWORKS Company Projects Products CLIMBING SYSTEMS Pilosio s CLIMBING SYSTEM with mechanical handling enable vertical construction joints to be created in succession without the aid of