Aluma EasySet Continuing Innovation from Aluma S ystems

Size: px

Start display at page:

Download "Aluma EasySet Continuing Innovation from Aluma S ystems"

Dale Welch
6 years ago
Views:

Product Sheet Aluma EasySet Aluma Systems Concrete Construction Aluma EasySet Continuing Innovation from Aluma S ystems Introduction With more than 35 years of experience in shoring and formwork,

1 Product Sheet Aluma EasySet Aluma Systems Concrete Construction Aluma EasySet Continuing Innovation from Aluma S ystems Introduction With more than 35 years of experience in shoring and formwork, Aluma Systems is pleased to introduce EasySet. This new integrated forming and shoring system can be used in virtually any application where reinforced cast-in-place concrete is the specified method of construction. As with all Aluma products, safety and quality are of primary importance, and when combined with competitive pricing, engineering and field support, contractors will be sure to see and experience the Aluma full service advantage. Versatility The EasySet system provides the option of a monolithic and/or a 2-stage casting design, offering flexibility to suit any application. EasySet offers stay-in-place posting for slab work, thus eliminating re-propping Safe Engineered by an experienced, safety-award-winning team. Manufactured under a tight quality control program. Smart Unique panel construction. Monolithic and/or 2 stage casting. Efficient Stay in place posting for slab work, no repropping required. Wedge and Pin allow for easy connection and quick stripping.

system Features offers a lightweight, cost effective, and complete all

Although this system is primarily aimed at low-rise residential

E - fficient, ease of assembly, no crane required, economical.

2 system Features offers a lightweight, cost effective, and complete all aluminum solution to the contractor s shoring and forming requirements. Although this system is primarily aimed at low-rise residential developments, it can be utilized for any CIP application. E - fficient, ease of assembly, no crane required, economical. A - daptable, can be used as monolithic or in two stage casting applciations for any geometry. S - ystematic, specifically designed to suit the clients needs, simple and easy to erect. Y - Why...because of the unbeatable value and service Aluma supplies with all its products.

Walls & Column Forms can be used to form large walls & columns where flat ties are not practical or not preferred.

EasySet Double Box Waler (50x50) EasySet Double Box Waler (100x50) Plumbing Brace Tie & Wing Nut (By Contractor) Waler Support

Using Hitch Pin & Rivets, Corner Tie Brackets are connected to the Walers to provide more tie support at column/wall corner

EasySet Double Box Waler (100x50) EasySet Panel Stiffener EasySet Double Box Waler (100x50) Waler Support Bracket The Waler

The bracket supports the double box waler until it is tied through by contractor.

3 Walls & Column Forms can be used to form large walls & columns where flat ties are not practical or not preferred. In this case to ensure the strength of the system, double box walers & ties are used. EasySet Double Box Waler (50x50) EasySet Double Box Waler (100x50) Plumbing Brace Tie & Wing Nut (By Contractor) Waler Support Bracket Hitch Pin & Rivet Waler - Panel Connector Waler Support Bracket Ties & Tie Plates (By Contractor) Corner Tie Bracket Using Hitch Pin & Rivets, Corner Tie Brackets are connected to the Walers to provide more tie support at column/wall corner locations. EasySet Double Box Waler (100x50) EasySet Panel Stiffener EasySet Double Box Waler (100x50) Waler Support Bracket The Waler Support Bracket hooks onto the panel stiffeners of an EasySet panel. The bracket supports the double box waler until it is tied through by contractor. Waler - Panel Connector Also, the Walers can be connected to the EasySet panels, with the Waler-Panel Connector, at any hole location along the side of the panel. This tightens and aligns the form, as well as gangs them together. M16x40 Bolt Assembly 60x60 Angle To protect the EasySet Panels from damage and to allow easy striking, angles are bolted to the bottom of the panels, allowing the panel to be tilted away during striking.

Stair forms are designed to allow walls and stairs to be poured simultaneously. The stair forms are completed with a step cover to allow for even faster pouring.

Alternatively, stairs without top covers can also be provided upon request.

4 Stair forms are designed to allow walls and stairs to be poured simultaneously. The stair forms are completed with a step cover to allow for even faster pouring. As an added safety feature, a thread plate is attached to each step cover to provide safe access for workers to travel up & down the stairs. Alternatively, stairs without top covers can also be provided upon request. Custom EasySet Wall Panels EasySet Stairs Side Form Step Cover with Thread Plate EasySet Post Shore EasySet Stair Form for Single Flight Stairs EasySet Stairs Ledger Form Step Cover with Thread Plate EasySet Panel with Thread Plate EasySet Stairs Side Form Stair forms can be easily configured for use inside building cores as an alternative to precast stairs. It can also be supplied as an independent stair core form for multi-storey buildings. EasySet Panel with Thread Plate EasySet Stairs Ledger Form EasySet Stair Form for Multi-Flight Stairs

system components Door Opening Monolithic Stairs Stripping Corner EasySet Panel Stripping Panel Wall Window Opening Wall Form Plumbing Brace Starter Panels Corner Catwalk

5 system components Door Opening Monolithic Stairs Stripping Corner EasySet Panel Stripping Panel Wall Window Opening Wall Form Plumbing Brace Starter Panels Corner Catwalk Bracket & Support Catwalk Support Strongback Standard Catwalk Bracket Cast in Anchor Aligner Bracket & Box Aligner Guardrail Support Aligner Bracket EasySet Post Shore & Post Head Panel

system Features Stainless Ring Bushing Centre Extrusion Side or End Rail Side Extrusion Box Stiffener Each extrusion of the panel is

Hole Details End Rail Non Structural Weld Quick strike chamfers allow for easy removal of slab and wall panels and create a systematic

Corner Stiffener Mechanical Lock Stainless Ring Bushing Each extrusion is mechanically locked by an aluminum stiffener` minimizing the amount

The stiffeners provide two functions: Continuous Structural (1) Structural strength Weld All Around (2) Practicality.

Easy to clean, flat side rails are designed for the rigidity and strength required by today s construction demands.

system offers an integrated pin and wedge system on all standard wall and deck panels which is easily replaceable if damaged.

there are less loose pieces to account for on site, reducing labour time and lost hardware.

6 system Features Stainless Ring Bushing Centre Extrusion Side or End Rail Side Extrusion Box Stiffener Each extrusion of the panel is manufactured using 6061-T6 aluminum alloy, configured to integrate the face sheets and rails using interlocking connections. Hole Details End Rail Non Structural Weld Quick strike chamfers allow for easy removal of slab and wall panels and create a systematic striking sequence that will be repeated every time the system is used. Corner Stiffener Mechanical Lock Stainless Ring Bushing Each extrusion is mechanically locked by an aluminum stiffener` minimizing the amount of welding, therefore reducing the maintenance required over the life of the panel while maintaining structural integrity and rigidity. The stiffeners provide two functions: Continuous Structural (1) Structural strength Weld All Around (2) Practicality. Panels can be easily maneuvered via the stiffeners. Easy to clean, flat side rails are designed for the rigidity and strength required by today s construction demands. Rails are notched for tie placement. system offers an integrated pin and wedge system on all standard wall and deck panels which is easily replaceable if damaged. EasySet Stripping Corner Pouring Position 150 Stripping Panel Typical EasySet Wall Panel Stripping Position By having an integrated pin, there are less loose pieces to account for on site, reducing labour time and lost hardware. Loose wedge and pins are included in the system to connect smaller nonstandard panels and accessories. Alternatively, bolts can also be used to connect smaller parts, thereofore, minimizing the nummber of loose pieces. The combination of pin and wedge connections allow easy connection of accessories such as guardrail brackets, aligner brackets and plumbing brace brackets. flat ties fits into pre-cut recesses in the EasySet panel and is secured to the panels using the Pin & Wedge. When properly secured, the flat ties provide lateral restrain for wall panels.

System features To properly secure panels at an outside corner, a 60x60 aluminum

For multi-story buildings, a set of EasySet Starter Panels are employed to

This maintains a consistent construction joint.

the concrete with a re-useable high tensile concrete screw & M16 bolt.

required to form any upturn beams above the slab edge.

connection to existing ties to provide a safe working platform for workers to

At locations where there is an opening, a Catwalk Support Strongback can be used

7 System features To properly secure panels at an outside corner, a 60x60 aluminum angle is used to connect the two adjacent panels. For multi-story buildings, a set of EasySet Starter Panels are employed to provide a starting platform for the panels of the subsequent pour. This maintains a consistent construction joint. When the structure ends at a slab edge, the slab edge panel will be anchored into the concrete with a re-useable high tensile concrete screw & M16 bolt. The slab edge panels can now act as starter panels for any panels that are required to form any upturn beams above the slab edge. Catwalk Brackets are fixed to completed concrete walls using a simple pin & wedge connection to existing ties to provide a safe working platform for workers to access the exterior of the building. At locations where there is an opening, a Catwalk Support Strongback can be used to provide mounting point for the Catwalk Bracket. panels are fully strikeable, propping remains in position to support green concrete. Corner Catwalk Bracket allow additional perimeter access where required, providing additional room at the corners of the building.

SYSTEM FEATURES Aluma EasySet is designed for 6100 kg/m 2 concrete pressure. Typical tie bar spacing at 30 cm or 60 cm c/c depending on wall height and pour rate.

Custom widths and lengths can be supplied according to project requirements. Face sheet thicknes s from 3.2 mm to 3.5 mm. For custom panels the face sheet thickness is 4.0 mm.

Extruded corners with chamfer edges are made to allow monolithic wall/slab pour and quick-easy stripping.

8 SYSTEM FEATURES Aluma EasySet is designed for 6100 kg/m 2 concrete pressure. Typical tie bar spacing at 30 cm or 60 cm c/c depending on wall height and pour rate. Panel width between 15 to 60 cm with standard panel height in increments of 30 cm to a maximum height of 2.1 m (approx. 20 kg/m 2 ). Custom widths and lengths can be supplied according to project requirements. Face sheet thicknes s from 3.2 mm to 3.5 mm. For custom panels the face sheet thickness is 4.0 mm. Chamfered edge panels have been developed to assure quick and easy stripping. Extruded corners with chamfer edges are made to allow monolithic wall/slab pour and quick-easy stripping. Extruded corners with chamfer edges are made to allow monolithic wall/slab pour and quick-easy stripping. WORLDWIDE CONTACTS GLOBAL MIDDLE EAST MEXICO Aluma Systems Concrete Construction Aluma Systems (Middle East) L.L.C. Brand Aluma de Mexico,S. de R.L. P.O. Box , de C.V. 55 Costa Road Street 17, Al Quoz, Toronto, Ontario Montecito 38, Piso 21, Industrial Area 4 Canada L4K 1M8 Oficina No. 32, Dubai, U.A.E. Col. Napoles, T +1 (905) T +971 (4) Mexico, D.F. C.P F +1 (905) F +971 (4) T (Sólo Canadá y EE.UU.): T +52 (55) ( 888) F +52 (55) Consult our Engineering Department for assistance in the application of these accessories. Illustrations and photos are not to scale. All dimensions nominal. Learn More & Subscribe to Mailing list at: Aluma Systems is a Brand Services Company Brand Services Inc.

ALISPLY. Scaffold Plank. Aligner. Plate Washer ½ x 6 x 6

ALISPLY. Scaffold Plank. Aligner. Plate Washer ½ x 6 x 6 Alisply components and accessories illustrated herein have been designed with safety and performance in mind to help achieve a safe and productive forming operation. It is recommended that all construction