Technical Brochure Corporate Flat Roof Accessory Portfolio 2017 / / SIKA SERVICES AG, TM ROOFING / ARMIN NAEF

Transcription

1 Technical Brochure Corporate Flat Roof Accessory Portfolio 2017 / / SIKA SERVICES AG, TM ROOFING / ARMIN NAEF

2 INHALT 1 Vapour control/barrier layer Sarnavap PE Vapour Control Layer (VCL) Sarnavap Vapour Barrier Self Adhesive / Primer S-Vap PE Vapour Barrier Self Adhesive / Primer Sarnavap Adhesive Tape / Sarnatape / Primer Sarnatape Separation, Slip, Levelling and Protection Layers Seperation and Fire Protection layer Separation and Protection Layer Levelling Layers Protection and Slip Layer Filter Layer Protection Layer Protection, Drainage and Filter Layer FPO Protection Layers PVC Protection Layers FPO Root-/Protection Sheet Paving Support Pad 11 3 Walkways FPO Walkway Pad FPO Walkway Sheet FPO Roll Walkway PVC Walkway Pad PVC Walkway Sheet 13 4 Prefabricated parts FPO Pipe Flashing Round Closed FPO Post Flashing Round Closed FPO Post Flashing Round Open FPO Pipe Flashing Round Closed (Dim. according to separate price list) FPO Pipe Flashing Round Open (Dim. according to separate price list) FPO Post Flashing Square Closed (Dim. according to separate price list) FPO Post Flashing Square Open (Dim. according to separate price list) FPO Point Flashing Injection Moulded incl. shrink hose FPO Seculine Vario Flashing incl. stainless steel clamping strap FPO Seculine Vario Seal Set incl. flashing, insulation plug and cap FPO Securant Vario Flashing incl. stainless steel clamping strap FPO Lightning Conductor Flashing Injection Moulded incl. shrink hose FPO Ligthning Conductor Clip and Disc FPO Corners Injection Moulded FPO Corners Injection Moulded Cup and Wave FPO Detailing Strip PVC Pipe Flashing Round Closed PVC Pipe Flashing PVC Post Flashing Round Closed (Dim. according to separate price list) PVC Post Flashing Round Open (Dim. according to separate price list) PVC Post Flashing Square Closed (Dim. according to separate price list) PVC Post Flashing Square Open (Dim. according to separate price list) PVC Universal Lead Through Flashing PVC Point Flashing Injection Moulded incl. shrink hose PVC Seculine Vario Flashing incl. stainless steel clamping strap 21 2/66

3 4.26 PVC Seculine Vario Seal Set incl. Flashing, Insulation and cap PVC Securant Flashing incl. stainless steel clamping strap PVC Lightning Conductor Flashing Injection Moulded incl. shrink hose PVC Ligthning Conductor Clip and Disc PVC Corners Injection Moulded PVC Corners Injection Moulded Cup and Wave Roof Cable Duct 23 5 Decor Profile FPO Decor Profile PVC Decor Profile Batten Profile 24 6 Drainage products FPO Rainwater Outlets FPO Gullies FPO Gully Sets FPO Gullies Balcony FPO Scuppers FPO Overflows FPO Gully Overflow Parapet Angled FPO Control Pipe PVC Rainwater Outlets PVC Gullies PVC Gully Sets PVC Gullies Balcony PVC Scuppers PVC Overflows PVC Gully Overflow Parapet Angled S-Control Pipe PVC Gully Overflow Screw-on Device Leafguard Attachment for Balcony Gully Inlet Element S10 for Balcony Gully Smell/Foam Stop for Balcony Gully Gravel Frame Gravel Frame with adjustable put-on frame Grid Square Perforated Strainer Duoseal Universal Coupling Control Box with insulated lid Control Neck 34 7 Sika roof control system (RCS) Sika RCS Set Complete Sika RCS Glass Fleece 35 8 Metal Sheet / Coil FPO Metal Sheet PVC Metal Sheet Sealing Tape 37 9 Fastening Profile Connection Clip FPO Welding Cord 38 3/66

4 9.4 PVC Welding Cord Fasteners Washers Insulation Washers Tubes Row Termination Plate Gravel Stop Fall arrest system Seculine Vario Type 3 / on concrete or concrete beam Seculine Vario Type 4 / on concrete Seculine Vario Type 5 / on wooden planking Seculine Vario Type 7 / on wooden beam with counter plate Seculine Vario Type 8 / on wooden beam Seculine Vario Type 9 / on corrugated metal Seculine Vario Ancillary Products ABS Point L3-BE / on concrete ABS Point LX-T / on corrugated metal Chemical Technical Products Insulation Adhesive Membrane Adhesive UPstand / Parpet Adherd Systems Special Adhesive Primers Cleaners / Solvents Tools Sarnamatic Auxiliary Tools Sika vacuum seam test Dilatec Sarnafil T Dilatec Sikadur Combiflex Adhesive Selants / Primer Sarnaplast Primer for Sealant connection Strip Sarnafil TG 55/TG Sarnafil FPO/PVC Sikagard Sikagard Primer for Sikagard Legal Note 65 4/66

5 INTRODUCTION SIKA IS KNOWN as reliable and innovative system provider which supplies not only membranes, but also roof accessory and ancillary products. We know how to solve problems at detailing and how to improve the quality and efficiency of the roofing application. Based on this knowledges, we have a wide range of roofing accessories with reliable quality and reasonable design. 5/66

6 1 VAPOUR CONTROL/BARRIER LAYER 1.1 SARNAVAP PE VAPOUR CONTROL LAYER (VCL) Art.no. Type Sd-Value Dimension E 100 m 5 x 25 m E 220 m 5 x 25 m E 420 m 4 x 25 m M (with integrated adhesive tape and a back foam coat) 250 m 1.5 x 50 m VCL made of polyethylene (PE). Warm roofs. 1.2 SARNAVAP VAPOUR BARRIER SELF ADHESIVE / PRIMER Art.no. Type Sd-Value Dimension E SA 1500 m 1.08 x 30 m E SA FR 1) 1500 m 1.38 x 40 m E SA FR 1) 1500 m 1.08 x 40 m Primer kg pail Primer kg pail 1) FR = Fire Reduced according to DIN Polymer modified self-adhesive bitumen with glass fibre reinforcement and an aluminium foil as top layer. Warm roofs. 1.3 S-VAP PE VAPOUR BARRIER SELF ADHESIVE / PRIMER Art.no. Type Sd-Value Dimension E SA FR 1) 1500 m 1.20 x 70 m Primer kg pail Primer kg pail 1) FR = Fire Reduced according to DIN Cross laminated PE-film with aluminium inlay and a hot melt adhesive on the back side. Warm roofs. 6/66

7 1.4 SARNAVAP ADHESIVE TAPE / SARNATAPE / PRIMER Art.no. Type Dimension Packing F 1 x 15 mm / 40 m Box with 3 rolls x 20 mm / 20 m Box with 10 rolls x 200 mm / 20 m Box with 1 roll Primer 130 Tin with 400 ml incl. brush Butyl-rubber adhesive tapes. Air and vapour tight connections for PE VCL s. 1.5 SARNATAPE 60 Art.no. Name Dimension Packing Sarnatape m Box with 10 rolls Sarnatape 60 with one-side adhesion and fabric reinforcing, is a pliant and ductile polyethylene membrane sealing tape with polyacrylate adhesive technology. Taping of seams, connections and terminations as well as details according to application instructions for Sarnafil MT sub-roof membranes (FPO), Sarnavap Vapour Control Layers (PE). 7/66

8 2 SEPARATION, SLIP, LEVELLING AND PROTECTION LAYERS 2.1 SEPERATION AND FIRE PROTECTION LAYER Art.no. Type Dimension S-Glass Fleece x 100 m Separation and fire protection layer made of glass fibre. Separation layer between Sarnafil or Sikaplan membranes and EPS/XPS insulation and fire protection layer. 2.2 SEPARATION AND PROTECTION LAYER Art.no. Type Dimension S-Felt T x 50 m Separation, levelling and protection layer made of polyester (PES fibres). Separation and levelling layer between Sarnafil or Sikaplan membranes and incompatible substrates and as a protection layer between Sarnafil or Sikaplan membranes and any protective topping or pavement. 2.3 LEVELLING LAYERS Art.no. Type Dimension S-Felt A x 50 m SPL W Felt x 25 m S-Felt S x 25 m Levelling layers made of polypropylene (PP). Levelling layer between Sarnafil or Sikaplan membranes and rough surfaces. 2.4 PROTECTION AND SLIP LAYER Art.no. Type Dimension S-Felt GK x 50 m Protection and slip layer made of polypropylene (PP) with a polyethylene (PE) coating on one side. Protective and slip layer beneath paving or poured cementitious topping and gravel ballasted roofs. 8/66

9 2.5 FILTER LAYER Art.no. Type Dimension S-Felt VS x 50 m Filter layer made of polypropylene (PP). Filter layer in inverted roofs to prevent small particles from penetrating gaps and voids in the thermal insulation layer. 2.6 PROTECTION LAYER Art.no. Type Dimension S-Protection Sheet RS 6mm 1.25 x 10 m S-Protection Sheet RS 8mm 1.25 x 8 m Protection layer made of technical grade recycled rubber granulate, polyurethane-bonded. Versatile protection layer on flat roofs and building structures. Not compatible in direct contact with PVC membranes. 2.7 PROTECTION, DRAINAGE AND FILTER LAYER Art.no. Type Dimension Aquadrain x 25 m Protection, drainage and filter layer made of polypropylene (PP). Protection, drainage and filter layer for extensive and intensive green roof systems with a minimal slope of 1.5 %. Art.no. Type Dimension Drainage Layer 25 board 1 x 2.25 m Protection, drainage and filter layer made of cross-linked, closed cell polyethylene (PE) foam flakes. Protection, drainage and filter layer for extensive and intensive green roof systems. 9/66

10 2.8 FPO PROTECTION LAYERS Art.no. Type Roll dimension Colour SF TG x 25 m Greenish SF TG x 15 m Anthracite SF TG x 10 m Anthracite Protection sheet based on flexible polyolefin (FPO) with inlay of glass non-woven. Protection layer on top of Sarnafil T roof waterproofing membrane in ballasted flat roof systems. 2.9 PVC PROTECTION LAYERS Art.no. Type Roll dimension Colour SF G (reinforced) 2 x 15 m Beige SPL-18 Protection (reinforced) 2 x 15 m Dark grey SPL-15 Protection (unreinforced) 2 x 20 m grey SPL-18 Protection (unreinforced) 2 x 20 m Black SPL SBV (unreinforced with polyester fleece on back side) 2 x 20 m Anthracite Protection sheet based on polyvinyl chloride (PVC). Protection layer on top of Sarnafil or Sikaplan PVC roof waterproofing membrane in ballasted flat roof systems FPO ROOT-/PROTECTION SHEET Art.no. Type Roll dimension Colour SF TG x 20 m Brown Root-/Protection sheet based on flexible polyolefin (FPO) with inlay of glass non-woven. Root-/Protection layer on top of bituminous roof waterproofing membrane in ballasted flat roof systems and shall be completely protected from UV-irradiation. 10/66

11 2.11 PAVING SUPPORT PAD Art.no. Type Packing Colour Paving levelling shim Box with 100 pcs. Black Paving support pad 1/20 with joint cross Black Paving support pad 1/20 with joint cross and Paving levelling shim are made of high density polyethylene (HD-PE) by injection moulding procedure. Paving support pad 1/20 with joint cross and Paving levelling shim are used for easy placement of paving slabs on flat roofs, plaza decks, balconies, verandas, courtyards etc. 11/66

12 3 WALKWAYS 3.1 FPO WALKWAY PAD Art.no. Type Dimension Packing Colour SF T Walkway Pad 600 x 600 mm Box with 15 pcs. Grey Sarnafil T Walkway Pad is made of high quality polyolefin from new Sarnafil T factory waste roofing membrane by injection moulding procedure. Provide a durable slip resisting walkway for roof maintenance or access on any Sarnafil T roofing system. 3.2 FPO WALKWAY SHEET Art.no. Type Roll dimension Colour SF TG 20 WW 0.66 x 20 m Window grey RAL SF TG 20 WW 1 x 20 m Window grey RAL SF TG 20 WW 1 x 20 m Pure white RAL 9010 Sarnafil TG 20 WW is a protection/walkway sheet based on flexible polyolefin (FPO) with inlay of glass non-woven. Provide a durable walkway for roof maintenance or access on any Sarnafil FPO roofing system. 3.3 FPO ROLL WALKWAY Art.no. Type Roll dimension Colour SF T TuffLane 0.76 x 15 m White with yellow border Sarnafil T TuffLane 40 YB is a protection/walkway sheet based on flexible polyolefin (FPO) with yellow border technology. Provide a durable slip resistant walkway for roof maintenance or access on any Sarnafil FPO roofing system. 12/66

13 3.4 PVC WALKWAY PAD Art.no. Type Dimension Packing Colour SF PVC Walkway Pad 600 x 600 mm Box with 15 pcs. Grey Sarnafil PVC Walkway Pad is made of high quality PVC from new Sarnafil factory waste roofing membrane by injection moulding procedure. Provide a durable slip resisting walkway for roof maintenance or access on any Sarnafil PVC or Sikaplan PVC roofing system. 3.5 PVC WALKWAY SHEET Art.no. Type Roll dimension Colour SPL Walkway 20 1 x 10 m Slate grey SPL Walkway 20 1 x 10 m Brick red SPL Walkway 40 1 x 10 m Slate grey Sikaplan Walway 20 is a protection sheet made of polyvinyl chloride (PVC). Provide a durable walkway for roof maintenance or access on any Sikaplan PVC roofing system. 13/66

14 4 PREFABRICATED PARTS 4.1 FPO PIPE FLASHING ROUND CLOSED Art.no. Type Inside ø Height Flange Colour V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm Beige V mm 400 mm 300 x 300 mm RAL V mm 400 mm 300 x 300 mm RAL 9016 Sarnafil T Pipe flashing is made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for pipe/vent flashing. 4.2 FPO POST FLASHING ROUND CLOSED Art.no. Type Inside ø Height Flange ø Colour P5 23 mm 300 mm 210 mm Beige P5 23 mm 300 mm 210 mm RAL P5 29 mm 300 mm 210 mm Beige P5 29 mm 300 mm 210 mm RAL P5 29 mm 300 mm 210 mm RAL P5 35 mm 300 mm 210 mm Beige P5 35 mm 300 mm 210 mm RAL P5 44 mm 300 mm 210 mm Beige 14/66

15 P5 44 mm 300 mm 210 mm RAL P5 49 mm 300 mm 210 mm Beige P5 49 mm 300 mm 210 mm RAL P5 64 mm 300 mm 210 mm RAL 7040 Sarnafil T Post flashing is made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for pipe flashing. 4.3 FPO POST FLASHING ROUND OPEN Art.no. Type Inside ø Height Flange ø Colour P6 23 mm 300 mm 210 mm Beige P6 23 mm 300 mm 210 mm RAL P6 29 mm 300 mm 210 mm Beige P6 29 mm 300 mm 210 mm RAL P6 35 mm 300 mm 210 mm Beige P6 35 mm 300 mm 210 mm RAL P6 44 mm 300 mm 210 mm Beige P6 44 mm 300 mm 210 mm RAL P6 49 mm 300 mm 210 mm Beige P6 49 mm 300 mm 210 mm RAL 7040 Sarnafil T Post flashing is made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for pipe flashing. 4.4 FPO PIPE FLASHING ROUND CLOSED (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside ø Height Flange ø Colour Round closed Various 380 mm Various Beige Round closed Various 380 mm Various RAL Round closed Various 380 mm Various RAL Round closed Various 380 mm Various RAL 7016 Sarnafil T Pipe flashing is made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for pipe flashing 15/66

16 4.5 FPO PIPE FLASHING ROUND OPEN (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside ø Height Flange ø Colour Round open Various 380 mm Various Beige Round open Various 380 mm Various RAL Round open Various 380 mm Various RAL Round open Various 380 mm Various RAL 7016 Sarnafil T Pipe flashing is made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for pipe flashing. 4.6 FPO POST FLASHING SQUARE CLOSED (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside Height Flange Colour Square closed Various 380 mm Square various Beige Square closed Various 380 mm Square various RAL Square closed Various 380 mm Square various RAL Square closed Various 380 mm Square various RAL 7016 Sarnafil T Post flashing is made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for post flashing. 4.7 FPO POST FLASHING SQUARE OPEN (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside Height Flange Colour Square open Various 380 mm Square various Beige Square open Various 380 mm Square various RAL Square open Various 380 mm Square various RAL Square open Various 380 mm Square various RAL 7016 Sarnafil T Post flashing is made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for post flashing. 4.8 FPO POINT FLASHING INJECTION MOULDED INCL. SHRINK HOSE Art.no. Type Inside ø Height Flange ø Colour Point Flashing 17 mm 250 mm 180 mm Beige Point Flashing 17 mm 250 mm 180 mm RAL Point Flashing 21 mm 250 mm 180 mm Beige Point Flashing 21 mm 250 mm 180 mm RAL 7040 Sarnafil T Point flashing 2.0 mm thick produced by injection moulding process. Prefabricated part for pipe flashing e.g. Secupoint, ABS Point fall arrest anchors. 16/66

17 4.9 FPO SECULINE VARIO FLASHING INCL. STAINLESS STEEL CLAMPING STRAP Art.no. Type Inside ø Height Flange ø Colour Seculine Vario Flashing 51 mm 250 mm 180 mm Beige Seculine Vario Flashing 51 mm 250 mm 180 mm RAL 7040 Sarnafil T Seculine Vario Flashing is made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for pipe flashing e.g. Seculine Vario fall arrest anchor FPO SECULINE VARIO SEAL SET INCL. FLASHING, INSULATION PLUG AND CAP Art.no. Type Inside ø Height Flange Colour Seculine Vario seal set 112 mm 400 mm 300 x 300 mm Beige Seculine Vario seal set 112 mm 400 mm 300 x 300 mm RAL Seculine Vario seal set 112 mm 400 mm 300 x 300 mm RAL 9016 Sarnafil T Seculine Vario seal set made of 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66 and includes the insulation plug and the red cap. Prefabricated part for thermal bridge free flashing e.g. Seculine Vario fall arrest anchor FPO SECURANT VARIO FLASHING INCL. STAINLESS STEEL CLAMPING STRAP Art.no. Type Inside ø Height Flange ø Colour Securant Flashing 77 mm 250 mm 180 mm Beige Securant Flashing 77 mm 250 mm 180 mm RAL 7040 Sarnafil T Securant Flashing is made 1.5 mm thick synthetic roof waterproofing membrane Sarnafil TG 66. Prefabricated part for pipe flashing e.g. Securant fall arrest anchor FPO LIGHTNING CONDUCTOR FLASHING INJECTION MOULDED INCL. SHRINK HOSE Art.no. Type Inside ø Height Flange ø Colour Lightning Conductor Flashing Lightning Conductor Flashing Lightning Conductor Flashing 11 mm 250 mm 160 mm Beige 11 mm 250 mm 160 mm RAL mm 250 mm 160 mm RAL 9016 Sarnafil T Lightning Conductor flashing 2.0 mm thick is made by injection moulding procedure. Prefabricated part for pipe flashing e.g. Lightning Conductor. 17/66

18 4.13 FPO LIGTHNING CONDUCTOR CLIP AND DISC Art.no. Type Application Colour KD 45/8 Conductor clip Grey KD 45/8 V2A Conductor clip V2A grey Disc Welding disc Beige Disc Welding disc RAL Disc Welding disc RAL 9016 Prefabricated parts to fix the Lightning conductors with diam mm FPO CORNERS INJECTION MOULDED Art.no. Type Application Packing Colour I / 90 Inside corner 10 pcs. per bag Beige I / 90 Inside corner 10 pcs. per bag RAL I / 90 Inside corner 10 pcs. per bag RAL I / 90 Inside corner 10 pcs. per bag RAL I / 90 Inside corner 10 pcs. per bag RAL A / 90 Outside corner 10 pcs. per bag Beige A / 90 Outside corner 10 pcs. per bag RAL A / 90 Outside corner 10 pcs. per bag RAL A / 90 Outside corner 10 pcs. per bag RAL A / 90 Outside corner 10 pcs. per bag RAL 7035 Sarnafil T Cornes 1.8 mm thick are made by injection moulding procedure. Prefabricated corner patches FPO CORNERS INJECTION MOULDED CUP AND WAVE Art.no. Type Application Packing Colour CI / 90 Inside corner (Cup) 10 pcs. per bag Beige CI / 90 Inside corner (Cup) 10 pcs. per bag RAL WA / 90 Outside corner (Wave) 10 pcs. per bag Beige WA / 90 Outside corner (Wave) 10 pcs. per bag RAL 7040 Sarnafil T Cornes 1.5 mm thick are made by injection moulding procedure. Prefabricated corner patches. 18/66

19 4.16 FPO DETAILING STRIP Art.no. Type Application Roll dimension Colour SF T D Detailing 0.50 x 20 m Beige/RAL SF T D Detailing 0.50 x 20 m RAL SF T D Detailing 0.50 x 20 m RAL SF T D Detailing 0.50 x 20 m RAL 7016 Sarnafil T D is an unreinforced multi-layer strip. Detailing strip for various applications PVC PIPE FLASHING ROUND CLOSED Art.no. Type Inside ø Height Flange Colour R 1/75 77 mm 400 mm 300 x 300 mm No light grey R 1/75 77 mm 400 mm 300 x 300 mm No lead grey R 1/80 82 mm 400 mm 300 x 300 mm No light grey R 1/90 92 mm 400 mm 300 x 300 mm No light grey R 1/90 92 mm 400 mm 300 x 300 mm No lead grey R 1/90 92 mm 400 mm 300 x 300 mm RAL R 1/ mm 400 mm 300 x 300 mm No light grey R 1/ mm 400 mm 300 x 300 mm No lead grey R 1/ mm 400 mm 300 x 300 mm RAL R mm 400 mm 300 x 300 mm No light grey R 1/ mm 400 mm 300 x 300 mm No lead grey R 1/ mm 400 mm 300 x 300 mm RAL R 1/ mm 400 mm 300 x 300 mm No light grey R 1/ mm 400 mm 300 x 300 mm No light grey R 1/ mm 400 mm 300 x 300 mm No light grey R 1/ mm 400 mm 300 x 300 mm No light grey R 1/ mm 400 mm 300 x 300 mm No light grey S-Pipe flashing is made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410. Prefabricated part for pipe/vent flashing PVC PIPE FLASHING Art.no. Type Roll dimension Colour Pipe Flashing 0.30 x 1.20 m Light grey Pipe Flashing 0.30 x 1.20 m Slate grey Sikaplan Pipe flashing is made of 1.8mm thick synthetic homogenous roof waterproofing membrane Sikaplan S. One side widened strip for on job site customized pipe/vent flashing. 19/66

20 4.19 PVC POST FLASHING ROUND CLOSED (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside ø Height Flange ø Colour P1 Various 285 mm diam. various No light grey P1 Various 285 mm diam. various No lead grey P1 Various 285 mm Diam. various RAL 9016 S-Post flashing is made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410. Prefabricated part for post flashing PVC POST FLASHING ROUND OPEN (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside ø Height Flange ø Colour P2 Various 285 mm Diam. various No light grey P2 Various 285 mm Diam. various No lead grey P2 Various 285 mm Diam. various RAL 9016 S-Post flashing is made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410. Prefabricated part for post flashing PVC POST FLASHING SQUARE CLOSED (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside Height Flange Colour P3 Various 285 mm Square various No light grey P3 Various 285 mm Square various No lead grey P3 Various 285 mm Square various RAL 9016 S-Post flashing is made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410. Prefabricated part for post flashing PVC POST FLASHING SQUARE OPEN (DIM. ACCORDING TO SEPARATE PRICE LIST) Art.no. Type Inside Height Flange Colour P4 Various 285 mm Square various No light grey P4 Various 285 mm Square various No lead grey P4 Various 285 mm Square various RAL 9016 S-Post flashing is made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410. Prefabricated part for post flashing. 20/66

21 4.23 PVC UNIVERSAL LEAD THROUGH FLASHING Art.no. Type Inside ø Height Flange ø Colour Universal 10, 18 and 33mm 150 mm 170 mm Light grey Universal lead through flashing is 2.0mm thick made by injection moulding procedure. Prefabricated part for post flashing PVC POINT FLASHING INJECTION MOULDED INCL. SHRINK HOSE Art.no. Type Inside ø Height Flange ø Colour Point Flashing 17 mm 250 mm 180 mm Light grey Point Flashing 21 mm 250 mm 180 mm Light grey S-Point flashing 2.0mm thick produced by injection moulding procedure. Prefabricated part for pipe flashing e.g. Secupoint, ABS Point fall arrest anchors PVC SECULINE VARIO FLASHING INCL. STAINLESS STEEL CLAMPING STRAP Art.no. Type Inside ø Height Flange ø Colour Seculine Vario Flashing 51 mm 250 mm 180 mm No light grey Seculine Varui Flashing 51 mm 250 mm 180 mm No lead grey S-Seculine Vario Flashing is made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410. Prefabricated part for pipe flashing eg. Seculine Vario fall arrest anchor PVC SECULINE VARIO SEAL SET INCL. FLASHING, INSULATION AND CAP Art.no. Type Inside ø Height Flange Colour mm 400 mm 300 x 300 mm No light grey mm 400 mm 300 x 300 mm RAL 9016 S-Seculine Vario seal set made of 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410 and includes the insulation plug and the red cap. Prefabricated part for thermal bridge free flashing e.g. Seculine Vario fall arrest anchor. 21/66

22 4.27 PVC SECURANT FLASHING INCL. STAINLESS STEEL CLAMPING STRAP Art.no. Type Inside ø Height Flange ø Colour Securant Flashing 77 mm 250 mm 180 mm No light grey S-Securant Flashing is made 1.5mm thick synthetic roof waterproofing membrane Sarnafil G 410. Prefabricated part for pipe flashing e.g. Securant fall arrest anchor PVC LIGHTNING CONDUCTOR FLASHING INJECTION MOULDED INCL. SHRINK HOSE Art.no. Type Inside ø Height Flange ø Colour Lightning Conductur Flashing Lightning Conductor Flashing 11 mm 250 mm 160 mm No light grey 11 mm 250 mm 160 mm RAL 9016 S-Lightning Conductor flashing 2.0mm thick is made by injection moulding procedure. Prefabricated part for pipe flashing e.g. Lightning Conductor PVC LIGTHNING CONDUCTOR CLIP AND DISC Art.no. Type Application Colour KD 45/8 Conductor clip grey KD 45/8 V2A Conductor clip V2A grey Disc Light grey Disc RAL 9016 Prefabricated parts to fix the Lightning conductors with diam. 8 10mm PVC CORNERS INJECTION MOULDED Art.no. Type Application Packing Colour I / 90 Inside corner 10 pcs. per bag Light grey I / 90 Inside corner 10 pcs. per bag Slate grey I / 90 Inside corner 10 pcs. per bag RAL I / 90 Inside corner 10 pcs. per bag Beige I / 90 Inside corner 10 pcs. per bag Black I / 90 Inside corner 10 pcs. per bag Pale green I / 90 Inside corner 10 pcs. per bag Brick red I / 90 Inside Corner 10 pcs. per bag Anthracite A / 90 Outside corner 10 pcs. per bag Light grey A / 90 Outside corner 10 pcs. per bag Slate grey 22/66

23 A / 90 Outside corner 10 pcs. per bag RAL A / 90 Outside corner 10 pcs. per bag Beige A / 90 Outside corner 10 pcs. per bag Black / R A / 90 Outside corner 10 pcs. per bag Pale green A / 90 Outside corner 10 pcs. per bag Brick red A / 90 Outside Corner 10 pcs. per bag Anthracite S-Corners PVC mm thick are made by injection moulding procedure. Prefabricated corner patches PVC CORNERS INJECTION MOULDED CUP AND WAVE Art.no. Type Application Packing Colour CI / 90 Inside corner (Cup) 10 pcs. per bag Light grey CI / 90 Inside corner (Cup) 10 pcs. per bag Slate grey WA / 90 Outside corner (Wave) 10 pcs. per bag Light grey WA / 90 Outside corner (Wave) 10 pcs. per bag Slate grey S-Corners PVC mm thick are made by injection moulding procedure. Prefabricated corner patches ROOF CABLE DUCT Art.no. Type Application Packing Colour Pipe bend 110 Cable duct 1 pcs. per box Black The corresponding roof drain 110 and the pipe flashing 110 needs to be ordered separately. Sika Roof Cable Duct is prefabricated pipe bend with sliding socket made of PE-HD. Cable bushing. 23/66

24 5 DECOR PROFILE 5.1 FPO DECOR PROFILE Art.no. Brand Length Packing Colour Sarnafil 3 m Tube with 25 pcs. Beige Sarnafil 3 m Tube with 25 pcs. RAL Sarnafil 3 m Tube with 25 pcs. RAL 7016 Sarnafil T Décor Profiles are made by profile extrusion. Profile to imitate a traditional standing-seam metal roof. Can be hot air welded to the roofing membrane. 5.2 PVC DECOR PROFILE Art.no. Brand Length Packing Colour Sarnafil 3 m Tube with 25 pcs. Light grey no Sarnafil 3 m Tube with 25 pcs. Lead grey no Sarnafil 3 m Tube with 25 pcs. RAL Sarnafil 3 m Tube with 25 pcs. Patina green no Sarnafil 3 m Tube with 25 pcs. RAL Sikaplan 3 m Tube with 25 pcs. Light grey Sikaplan 3 m Tube with 25 pcs. Slate grey PVC Décor Profiles are made by profile extrusion. Profile to imitate a traditional standing-seam metal roof. Can be hot air welded to the roofing membrane. 5.3 BATTEN PROFILE Art.no. Name Length Colour Batten Profile Nr m Lead grey Batten Profile Jointing Piece Lead grey Batten Profile End Piece Lead grey The Batten Profile is a PVC-P extruded profile. Batten Profile creates an appearance of a traditional Batten Rolled Lead roof. Batten Profile can be applied to any exposed Sarnafil PVC roof systems. Batten End piece Batten Jointing piece 24/66

25 6 DRAINAGE PRODUCTS 6.1 FPO RAINWATER OUTLETS Art.no. Type Spigot ø Spigot Length Base plate Colour mm 450 mm 250 x 250 mm Beige mm 450 mm 250 x 250 mm Beige mm 300 mm 320 mm Beige mm 300 mm 320 mm Beige mm 500 mm 320 mm Beige mm 300 mm 320 mm Beige mm 500 mm 320 mm Beige mm 300 mm 320 mm Beige mm 500 mm 320 mm Beige mm 300 mm 320 mm Beige mm 500 mm 320 mm Beige mm 300 mm 380 mm Beige mm 500 mm 380 mm Beige mm 300 mm 380 mm Beige mm 500 mm 380 mm Beige mm 300 mm 380 mm Beige mm 500 mm 380 mm Beige mm 300 mm 380 mm Beige mm 500 mm 380 mm Beige Sarnafil T Drains are made of high quality polyolefin (PP) by injection moulding procedure. Rainwater outlets in flat roofs. 6.2 FPO GULLIES Art.no. Type Spigot ø Base plate Colour Vertical 75 mm 355 mm Beige Angled 75 mm 355 mm Beige Vertical 110 mm 355 mm Beige Vertical heatable 110 mm 355 mm Beige Angled 110 mm 355 mm Beige Vertical 125 mm 355 mm Beige Vertical heatable 125 mm 355 mm Beige Sarnafil T Gullies are made of high quality polyolefin (PP) by injection moulding procedure. Rainwater outlets in flat roofs. 25/66

26 6.3 FPO GULLY SETS Art.no. Type Spigot ø Base plate Colour Vertical 75 mm 355 mm Beige Angled 75 mm 355 mm Beige Vertical 110 mm 355 mm Beige Vertical heatable 110 mm 355 mm Beige Angled 110 mm 355 mm Beige Vertical 125 mm 355 mm Beige Vertical heatable 125 mm 355 mm Beige Sarnafil T Gully sets are made of high quality polyolefin (PP) by injection moulding procedure. Two-part Rainwater outlets in flat roofs. 6.4 FPO GULLIES BALCONY Art.no. Type Spigot ø Base plate Colour Vertical 50 mm 320 mm Beige Angled 50 mm 320 mm Beige Vertical 75 mm 320 mm Beige Angled 75 mm 320 mm Beige Vertical 110 mm 320 mm Beige Sarnafil T Gullies balconies are made of high quality polyolefin (PP) by injection moulding procedure. Rainwater outlets in balconies and terraces. 6.5 FPO SCUPPERS Art.no. Type Spigot Spigot length Inclination Colour Round 40 mm 450 mm 0 Beige Round 50 mm 450 mm 0 Beige Round 63 mm 465 mm 5 Beige Round 75 mm 465 mm 5 Beige Round 90 mm 465 mm 5 Beige Round 110 mm 490 mm 5 Beige Round 125 mm 490 mm 5 Beige Square 58 x 98 mm 490 mm 5 Beige Square 128 x 68 mm 450 mm 5 Beige Sarnafil T Scuppers are made of high quality polyolefin (PP) by injection moulding procedure. Rainwater outlets in flat roofs trough the parapet. 26/66

27 6.6 FPO OVERFLOWS Art.no. Type Spigot Length Inclination Base plate Colour Round 63 mm 460 mm x 250 mm Beige Round 110 mm 480 mm x 300 mm Beige Round 125 mm 480 mm x 300 mm Beige Square 128 x 68 mm 500 mm x 260 mm Beige Square 188 x 88 mm 500 mm x 280 mm Beige Square 308 x 88 mm 500 mm x 280 mm Beige Square 308 x 108 mm 300 mm x 300 mm Beige Square 308 x 108 mm 600 mm x 300 mm Beige Square 508 x 108 mm 300 mm x 300 mm Beige Square 508 x 108 mm 600 mm x 300 mm Beige Square 758 x 108 mm 300 mm x 300 mm Beige Square 758 x 108 mm 600 mm x 300 mm Beige Square 1008 x 108 mm 300 mm x 300 mm Beige Square 1008 x 108 mm 600 mm x 300 mm Beige Sarnafil T Overflows are made of high quality polyolefin (PP). Overflow outlets in flat roofs through the parapet. 6.7 FPO GULLY OVERFLOW PARAPET ANGLED Art.no. Type Spigot Installation height Base plate Colour Angled 75 mm Min. 90 mm 355 mm Beige/red Sarnafil T Gully Overflow parapet is made of high quality polyolefin (PP) by injection moulding procedure. Overflow outlet in flat roofs through the parapet. Height of overflow assembly is adjustable from 35 to 75 mm. 6.8 FPO CONTROL PIPE Art.no. Type Colour Control Pipe complete Beige Sarnafil T Control pipe complete is made of high quality polyolefin (PP). Control Pipe for ballasted flat roofs. Consists of: Pipe with base plate, Cap with integrated insulation plug, prefabricated Sarnafil T Flashing. 27/66

28 6.9 PVC RAINWATER OUTLETS Art.no. Type Spigot ø Spigot Length Base plate Colour mm 450 mm 250 x 250 mm Light grey mm 450 mm 250 x 250 mm Light grey mm 300 mm 300 x 300 mm octagonal Light grey mm 300 mm 300 x 300 mm octagonal Light grey mm 500 mm 300 x 300 mm octagonal Light grey mm 300 mm 300 x 300 mm octagonal Light grey mm 500 mm 300 x 300 mm octagonal Light grey mm 300 mm 330 x 330 mm octagonal Light grey mm 500 mm 330 x 330 mm octagonal Light grey mm 300 mm 330 x 330 mm octagonal Light grey mm 500 mm 330 x 330 mm octagonal Light grey mm 300 mm 330 x 330 mm octagonal Light grey mm 500 mm 330 x 330 mm octagonal Light grey mm 300 mm 380 x 380 mm octagonal Light grey mm 500 mm 380 x 380 mm octagonal Light grey mm 300 mm 380 x 380 mm octagonal Light grey mm 500 mm 380 x 380 mm octagonal Light grey mm 300 mm 380 x 380 mm octagonal Light grey mm 500 mm 380 x 380 mm octagonal Light grey S-Drains PVC are made of high quality PVC by injection moulding procedure. Rainwater outlets in flat roofs. 28/66

29 6.10 PVC GULLIES Art.no. Type Spigot ø Base plate Colour Vertical 75 mm 355 mm Light grey Angled 75 mm 355 mm Light grey Vertical 110 mm 355 mm Light grey Vertical heatable 110 mm 355 mm Light grey Angled 110 mm 355 mm Light grey Vertical 125 mm 355 mm Light grey Vertical heatable 125 mm 355 mm Light grey Vertical 160 mm 355 mm Light grey Vertical heatable 160 mm 355 mm Light grey S-Gullies PVC are made of high quality PVC by injection moulding procedure. Rainwater outlets in flat roofs PVC GULLY SETS Art.no. Type Spigot ø Base plate Colour Vertical 75 mm 355 mm Light grey Angled 75 mm 355 mm Light grey Vertical 110 mm 355 mm Light grey Vertical heatable 110 mm 355 mm Light grey Angled 110 mm 355 mm Light grey Vertical 125 mm 355 mm Light grey Vertical heatable 125 mm 355 mm Light grey Vertical 160 mm 355 mm Light grey Vertical heatable 160 mm 355 mm Light grey S-Gully sets PVC are made of high quality PVC by injection moulding procedure. Two-part Rainwater outlets in flat roofs PVC GULLIES BALCONY Art.no. Type Spigot ø Base plate Colour Vertical 50 mm 310 mm Light grey Angled 50 mm 310 mm Light grey Vertical 75 mm 310 mm Light grey Angled 75 mm 310 mm Light grey Vertical 110 mm 310 mm Light grey S-Gullies PVC balcony are made of high quality PVC by injection moulding procedure. Rainwater outlets in balconies and terraces. 29/66

30 6.13 PVC SCUPPERS Art.no. Type Spigot Spigot length Inclination Colour Round 40 mm 450 mm 0 Light grey Round 50 mm 450 mm 0 Light grey Round 63 mm 465 mm 5 Light grey Round 75 mm 465 mm 5 Light grey Round 90 mm 465 mm 5 Light grey Round 110 mm 490 mm 5 Light grey Round 125 mm 490 mm 5 Light grey Square 128 x 68 mm 450 mm 5 Light grey Square 88 x 48 mm 450 mm 5 Light grey Square 200 x 100 mm 450 mm 5 Light grey Square 200 x 100 mm 800 mm 5 Light grey S-Scuppers PVC are made of high quality PVC. Rainwater outlets in flat roofs trough the parapet PVC OVERFLOWS Art.no. Type Spigot Length Inclination Base plate Colour Round 63 mm 460 mm x 250 mm Light grey Round 110 mm 480 mm x 300 mm Light grey Round 125 mm 480 mm x 300 mm Light grey Square 88 x 48 mm 450 mm x 250 mm Light grey Square 128 x 68 mm 500 mm x 260 mm Light grey Square 188 x 88 mm 500 mm x 280 mm Light grey Square 308 x 88 mm 500 mm x 280 mm Light grey Square 308 x 108 mm 300 mm x 300 mm Light grey Square 308 x 108 mm 600 mm x 300 mm Light grey Square 508 x 108 mm 300 mm x 300 mm Light grey Square 508 x 108 mm 600 mm x 300 mm Light grey Square 758 x 108 mm 300 mm x 300 mm Light grey Square 758 x 108 mm 600 mm x 300 mm Light grey Square 1008 x 108 mm 300 mm x 300 mm Light grey Square 1008 x 108 mm 600 mm x 300 mm Light grey S-Overflows PVC are made of high quality PVC. Overflow outlets in flat roofs through the parapet. 30/66

31 6.15 PVC GULLY OVERFLOW PARAPET ANGLED Art.no. Type Spigot Installation height Base plate Colour Angled 75 mm Min. 90 mm 355 mm Light grey/red S- Gully Overflow parapet is made of high quality PVC by injection moulding procedure. Overflow outlet in flat roofs through the parapet. Height of overflow assembly is adjustable from 35 to 75 mm S-CONTROL PIPE PVC Art.no. Type Colour Control Pipe PVC complete Light grey S-Control pipe PVC complete is made of high quality PVC. Control Pipe for ballasted flat roofs. Consists of: Pipe with base plate, Cap with integrated insulation plug, prefabricated Sarnafil PVC Flashing GULLY OVERFLOW SCREW-ON DEVICE Art.no. Type Adjustability Base plate Colour Screw-on device mm 260 mm Red/black S-Gully Overflow screw-on device is made of high quality Polypropylene (PP). Overflow device for the standard Sika FPO or PVC Roof Gully LEAFGUARD Art.no. Type Diameter Suitable for Colour Sarnafil 237 mm ID mm Black S-Leafguard is made of high quality Polypropylene (PP). Leafguard for all roof drains with spigot inside diameter mm. 31/66

32 6.19 ATTACHMENT FOR BALCONY GULLY Art.no. Type Dimension Suitable for Attachment 100 x 100 x 120 mm Balcony Gully Attachment 150 x 150 x 125 mm Balcony Gully Attachment for Balcony Gully is made of high quality Polypropylene (PP) and stainless steel (1.4301). Attachment for Balcony Gully in a ballasted build-up INLET ELEMENT S10 FOR BALCONY GULLY Art.no. Type Diameter Suitable for Inlet Element 103 mm Balcony Gully and Attachment Inlet Element is made of high quality Polypropylene (PP). Used on top of the Balcony Gully below the Attachment for Balcony Gully to enable drainage in a ballasted build-up SMELL/FOAM STOP FOR BALCONY GULLY Art.no. Type Diameter Suitable for Smell stop 92 mm Attachment for Balcony Gully Inlet Element is made of Acrynitril-Butadien-Styrol-Copolymer (ABS). Inserted on top of the Attachment for Balcony Gully. 32/66

33 6.22 GRAVEL FRAME Art.no. Type Dimension Material basis Gravel frame 200 x 200 x 40 mm Stainless steel Gravel frame 200 x 200 x 60 mm Stainless steel S-Gravel frame is made of 2 mm thick Stainless steel (1.4301). Gravel frame for ballasted terraces GRAVEL FRAME WITH ADJUSTABLE PUT-ON FRAME Art.no. Type Dimension Material basis Gravel frame adjustable 200 x 200 x 50-80mm Stainless steel S-Gravel frame adjustable is made of 1 mm thick Stainless steel (1.4301). Gravel frame for ballasted terraces GRID SQUARE Art.no. Type Dimension Material basis Grid 190 x 190 mm Stainless steel S-Grid is made of 1.5/2.0 mm thick Stainless steel (1.4301). Grid for gravel frame PERFORATED STRAINER Art.no. Type Dimension Material basis Strainer 195 x 195 mm Stainless steel Perforated Strainer is made of 1.0 mm thick Stainless steel (1.4301). Strainer for adjustable gravel frame. 33/66

34 6.26 DUOSEAL UNIVERSAL COUPLING Art.no. Type Suitable for Socket/pipe inside diam. Packing mm Drain 50mm mm Box with 4 pcs mm Drain 56 mm mm Box with 4 pcs mm Drain 63 mm mm Box with 4 pcs mm Drain 75 mm mm Box with 4 pcs mm Drain 90 mm mm Box with 4 pcs mm Drain 95 mm mm Box with 4 pcs mm Drain 110 mm mm Box with 4 pcs mm Drain 125 mm mm Box with 1 pcs mm Drain 140 mm mm Box with 1 pcs mm Drain 160 mm mm Box with 1 pcs. The S-Duoseal Universal Coupling is made of ethylene propylene diene monomer rubber (EPDM) by injection moulding procedure. Universal coupling for Rainwater outlets in flat roofs CONTROL BOX WITH INSULATED LID Art.no. Dimension Material basis Colour x 350 x 120 mm Fibre reinforced Concrete Brown Control Box with insulated lid is made of high density fibre reinforced Concrete and a 20 mm thick XPS thermal insulation in the lid. For extensive green roofs, especially when the roof drain needs to be accessible at any time CONTROL NECK Art.no. Type S-Control Neck system S-Control Neck system is made of stainless steel (1.4301) PVC pipe and acrylic inspection glass. Enables to check the water-tightness of a flat roof from inside the building below the rooftop. 34/66

35 7 SIKA ROOF CONTROL SYSTEM (RCS) 7.1 SIKA RCS SET COMPLETE Art.no. Type Roof system SF T RCS Set beige FPO SF T RCS Set RAL 7040 FPO S-RCS Set PVC light grey PVC The RCS Set consists of: 2 pcs. RCS Cable Access duct with base plate 2 pcs. Insulation plug with cap 2 pcs. pipe flashing 2 pcs. RCS Contact plate with connection cable 1 roll Sarnatape 60 adhesive tape Facilitates ILD vector mapping leak detection above thermal insulation. 7.2 SIKA RCS GLASS FLEECE Art.no. Type Weight Roll Dimension Colour RCS Glass Fleece 120 g/m2 2 x 50 m Anthracite Conductive layer made of non-woven glass. Facilitates ILD vector mapping leak detection below Sarnafil and Sikaplan roofing membranes. 35/66

36 8 METAL SHEET / COIL 8.1 FPO METAL SHEET Art.no. Brand Type Dimension Colour Sarnafil Sheet 1 x 2 m Beige Sarnafil Sheet 1 x 3 m Beige Sarnafil Coil 1 x 30 m Beige Sarnafil Coil 1 x 150 m Beige Sarnafil Sheet 1 x 3 m RAL Sarnafil Sheet 1 x 2 m RAL Sarnafil Sheet 1 x 3 m RAL Sarnafil Coil 1 x 30 m RAL Sarnafil Coil 1 x 150 m RAL Sarnafil Sheet 1 x 2 m RAL Sarnafil Sheet 1 x 3 m RAL Sarnafil Coil 1 x 30 m RAL Sarnafil Sheet 1 x 2 m RAL Sarnafil Coil 1 x 30 m RAL Sikaplan Sheet 1 x 2 m RAL 7036 Galvanized metal on top side laminated with 1.10 mm thick Sarnafil T or Sikaplan T membrane. Used to form profiles for perimeter fixings and junctions for Sarnafil T or Sikaplan T membranes. 8.2 PVC METAL SHEET Art.no. Brand Type Dimension Colour Sarnafil Sheet 1 x 2 m Light grey no Sarnafil Sheet 1 x 3 m Light grey no Sarnafil Coil 1 x 30 m Light grey no Sarnafil Sheet 1 x 2 m Lead grey no Sarnafil Coil 1 x 30 m Lead grey no Sarnafil Sheet 1 x 2 m RAL Sarnafil Sheet 1 x 2 m RAL Sarnafil Sheet 1 x 2 m RAL Sarnafil Sheet 1 x 2 m Patina green no Sikaplan Sheet 1 x 2 m Light grey Sikaplan Sheet 1 x 3 m Light grey Sikaplan Coil 1 x 30 m Light grey Sikaplan Coil 1 x 30 m Slate grey Sikaplan Coil 1 x 300 m Light grey Sikaplan Coil 1.25 x 300 m Light grey 36/66

37 Sikaplan Coil 1.50 x 300 m Light grey Sikaplan Sheet 1 x 2 m Slate grey Sikaplan Sheet 1 x 3 m Slate grey Sikaplan Sheet 1 x 2 m Pale green Sikaplan Sheet 1 x 2 m Brick red Sikaplan Sheet 1 x 2 m Anthracite Sikaplan Sheet 1 x 3 m Anthracite Sikaplan Coil 1 x 30 m Anthracite Sikaplan Coil 1 x 300 m Anthracite Sikaplan Sheet 1 x 3 m Black / R Sikaplan Sheet 1 x 2 m Black / R Galvanized metal on top side laminated with 1.20 mm thick Sarnafil PVC membrane and 0.80 mm Sikaplan PVC membrane. Used to form profiles for perimeter fixings and junctions for Sarnafil PVC and Sikaplan PVC membranes. 8.3 SEALING TAPE Art.no. Name Dimension Packing S-Sealing Tape 10 x 10 mm x25 m Box with 4 rolls One side adhesive polyurethane soft foam tape with acrylate dispersion. Used between laminated metal sheet flashing and the substrate to prevent penetration of wind-driven water. 37/66

38 9 FASTENING 9.1 PROFILE Art.no. Type Punched hole Length Sarnabar mm 2250 mm Sarnabar mm 4500 mm Sarnabar 6/ / 10 mm 2250 mm Sarnabar 6/ / 10 mm 3000 mm Sarnabar 6/ / 10 mm 4500 mm Sarnabar 6/ / 15 mm 2250 mm Sarnabar 6/ / 15 mm 4500 mm Sarnabar Fastening Profiles are made of folded hot-dip coated steel. For the mechanical fixation of waterproofing membranes on roofing structures and perimeter fixations. 9.2 CONNECTION CLIP Art.no. Type Packaging Colour Sarnabar Connection Clip Pail with 350 pcs. Grey Sarnabar Connection Clip Bag with 50 pcs. Grey Sarnabar Connection Clips are made of polyamide (PA 6) by injection molding procedure. To connect the standard Sarnabar Fastening Profiles. 9.3 FPO WELDING CORD Art.no. Type Dimension Colour Packing Sarnafil T Welding Cord Ø 4 mm Beige Pail with 100 m1 The Sarnafil T Welding Cord is made of FPO compound by extruding procedure. Perimeter fastening of mechanically fastened flat roof systems and roof systems with ballast using Sarnabar Fastening Profiles to prevent the membranes from slipping. 38/66

39 9.4 PVC WELDING CORD Art.no. Type Dimension Colour Packing S-Welding Cord PVC Ø 4 mm red Pail with 100 m1 The S-Welding Cord PVC is made of PVC-P by extruding procedure. Perimeter fastening of mechanically fastened flat roof systems and roof systems with ballast using Sarnabar Fastening Profiles to prevent the membranes from slipping. 9.5 FASTENERS Art.no. Type Length Packing Sarnafast SF-4.8 Loose 60 mm 500 pcs Sarnafast SF-4.8 Loose 70 mm 500 pcs Sarnafast SF-4.8 Loose 80 mm 500 pcs Sarnafast SF-4.8 Loose 90 mm 500 pcs Sarnafast SF-4.8 Loose 100 mm 500 pcs Sarnafast SF-4.8 Loose 120 mm 500 pcs Sarnafast SF-4.8 Loose 140 mm 250 pcs Sarnafast SF-4.8 Loose 160 mm 250 pcs Sarnafast SF-4.8 Loose 180 mm 100 pcs Sarnafast SF-4.8 Loose 200 mm 100 pcs Sarnafast SF-4.8 Loose 220 mm 100 pcs Sarnafast SF-4.8 Loose 240 mm 100 pcs Sarnafast SF-4.8 Loose 260 mm 100 pcs Sarnafast SF-4.8 Loose 280 mm 100 pcs Sarnafast SF-4.8 Loose 300 mm 100 pcs. Sarnafast SF-4.8 is a hardened carbon steel fastener. In combination with Sarnafast Washers KT 82 x 40, IF/IG-C-82 x 40 or Sarnabar Fastening Profiles for the mechanical fastening of waterproofing membranes on corrugated steel and solid wood structures. Art.no. Type Length Packing Sarnafast SF-M 4.8 Magazine loaded 80 mm 750 pcs Sarnafast SF-M 4.8 Magazine loaded 90 mm 750 pcs Sarnafast SF-M 4.8 Magazine loaded 100 mm 750 pcs Sarnafast SF-M 4.8 Magazine loaded 120 mm 750 pcs Sarnafast SF-M 4.8 Magazine loaded 140 mm 750 pcs Sarnafast SF-M 4.8 Magazine loaded 160 mm 750 pcs Sarnafast SF-M 4.8 Magazine loaded 180 mm 500 pcs Sarnafast SF-M 4.8 Magazine loaded 200 mm 500 pcs. 39/66

40 Sarnafast SF-M 4.8 Magazine loaded 220 mm 500 pcs Sarnafast SF-M 4.8 Magazine loaded 240 mm 500 pcs. Sarnafast SF-M 4.8 is a hardened carbon steel fastener. In combination with Sarnafast Washers KT 82 x 40, IF/IG-C-82 x 40 or Sarnabar Fastening Profiles for the mechanical fastening of waterproofing membranes on corrugated steel and solid wood structures. The magazine loaded fastener allows the use of automated setting tool. Art.no. Type Length Packing Sarnafast SBF-6.0 Loose 35 mm 500 pcs Sarnafast SBF-6.0 Loose 50 mm 250 pcs Sarnafast SBF-6.0 Loose 60 mm 500 pcs Sarnafast SBF-6.0 Loose 70 mm 250 pcs Sarnafast SBF-6.0 Loose 80 mm 250 pcs Sarnafast SBF-6.0 Loose 90 mm 250 pcs Sarnafast SBF-6.0 Loose 100 mm 250 pcs Sarnafast SBF-6.0 Loose 120 mm 250 pcs Sarnafast SBF-6.0 Loose 140 mm 250 pcs Sarnafast SBF-6.0 Loose 160 mm 250 pcs Sarnafast SBF-6.0 Loose 180 mm 250 pcs Sarnafast SBF-6.0 Loose 200 mm 250 pcs Sarnafast SBF-6.0 Loose 220 mm 250 pcs Sarnafast SBF-6.0 Loose 240 mm 250 pcs Sarnafast SBF-6.0 Loose 260 mm 250 pcs Sarnafast SBF-6.0 Loose 280 mm 250 pcs Sarnafast SBF-6.0 Loose 300 mm 250 pcs. Sarnafast SBF-6.0 is a hardened carbon steel fastener. In combination with Sarnafast Tubes SFT-50, Sarnabar Tubes SBT-20 or in combination with Sarnafast Washers KTL 82 x 40, IF/IG-C 82 x 40 or Sarnabar Fastening Profiles for the mechanical fastening of waterproofing membranes and insulation boards into steel, concrete and plywood/osb substrates. Art.no. Type Length Packing Sarnafast SBF-S-6.0 Loose 60 mm 250 pcs Sarnafast SBF-S-6.0 Loose 80 mm 250 pcs Sarnafast SBF-S-6.0 Loose 100 mm 100 pcs Sarnafast SBF-S-6.0 Loose 120 mm 100 pcs Sarnafast SBF-S-6.0 Loose 130 mm 100 pcs Sarnafast SBF-S-6.0 Loose 140 mm 100 pcs Sarnafast SBF-S-6.0 Loose 160 mm 100 pcs. Sarnafast SBF-S-6.0 is a austenitic stainless steel fastener. 40/66

41 In combination with Sarnafast Tubes SFT-50, Sarnabar Tubes SBT-20 T or in combination with Sarnafast Washers KTL 82 x 40, IF/IG-C 82 x 40 or Sarnabar Fastening Profiles for the mechanical fastening of waterproofing membranes and insulation boards into steel and plywood/osb substrates. 9.6 WASHERS Art.no. Type Dimension Packing Sarnafast Washer KT 82 x 40 mm Wire bound 50 pcs. 500 pcs. Sarnafast Washer KT is a zinc plated steel washer with diamond-shaped reinforcement and specially stamped barbs, hole diameter 4.9 mm. For mechanically fastened roof waterproofing membranes in combination with Sarnafast Fastener SF Only for fastening roof waterproofing membranes over compressible thermal insulation (not for use on hard substrates) Art.no. Type Dimension Packing Sarnafast Washer KTL 82 x 40 mm Loose 250 pcs. Sarnafast Washer KTL is a zinc plated steel washer with diamond-shaped reinforcement and specially stamped barbs, hole diameter 7.5 mm. For mechanically fastened roof waterproofing membranes in combination with Sarnafast Fastener SBF- 6.0 (all decks) and Sarnafast Fastener SBF-S-6.0 (stainless steel for steel and plywood/osb decks). Only for fastening roof waterproofing membranes over compressible thermal insulation (not for use on hard substrates). Art.no. Type Dimension Packing Sarnafast Washer IF/IG-C 82 x 40 mm Loose 100 pcs. Sarnafast Washer IF/IG-C is zinc plated steel, hole diameter 7.5 mm. For mechanically fastened roof waterproofing membranes in combination with Sarnafast Fastener SF-4.8, Sarnafast Fastener SBF-6.0 (all decks) and Sarnafast Fastener SBF-S-6.0 (stainless steel for steel and plywood/osb decks). Only for fastening roof waterproofing membranes over hard substrates). 41/66

42 9.7 INSULATION WASHERS Art.no. Type Dimension Packing Sarnafast Insulation Washer DT 70 x 70 mm Loose 100 pcs. Sarnafast Insulation Washer DT is a quadratic, zinc plated steel washer with rounded edges, hole diameter 4.9 mm. For mechanical fastening of thermal insulation in combination with Sarnafast Fastener SF-4.8 fasteners on corrugated steel and solid wood structures. Art.no. Type Dimension Packing Sarnafast Insulation Washer DTL 70 x 70 mm Loose 100 pcs. Sarnafast Insulation Washer DT is a quadratic, zinc plated steel washer with rounded edges, hole diameter 7.5 mm. For mechanical fastening of thermal insulation in combination with Sarnafast Fastener SBF-6.0 (all decks) and Sarnafast Fastener SBF-S-6.0 (stainless steel for steel and plywood/osb decks). 9.8 TUBES Art.no. Type Length Packing Sarnafast Tube SFT-50 Loose 40 mm 500 pcs Sarnafast Tube SFT-50 Loose 70 mm 500 pcs Sarnafast Tube SFT-50 Loose 100 mm 500 pcs Sarnafast Tube SFT-50 Loose 130 mm 500 pcs Sarnafast Tube SFT-50 Loose 160 mm 500 pcs Sarnafast Tube SFT-50 Loose 190 mm 250 pcs Sarnafast Tube SFT-50 Loose 230 mm 250 pcs Sarnafast Tube SFT-50 Loose 300 mm 250 pcs. Sarnafast Tube SFT-50 is a polyamide tube (PA 6). In combination with Sarnafast Fastener SBF-6.0 (all decks) and Sarnafast Fastener SBF-S-6.0 (stainless steel for steel and plywood/osb decks) for the mechanical fastening ofwaterproofing membranes and insulation boards. 42/66

43 Art.no. Type Length Packing Sarnabar Tube SBT-20 Loose 70 mm 500 pcs Sarnabar Tube SBT-20 Loose 100 mm 500 pcs Sarnabar Tube SBT-20 Loose 130 mm 500 pcs Sarnabar Tube SBT-20 Loose 160 mm 250 pcs Sarnabar Tube SBT-20 Loose 190 mm 250 pcs Sarnabar Tube SBT-20 Loose 230 mm 250 pcs Sarnabar Tube SBT-20 Loose 300 mm 250 pcs. Sarnabar Tube SBT-20 is a polyamide tube (PA 6). In combination with Sarnafast Fastener SBF-6.0 (all decks) and Sarnafast Fastener SBF-S-6.0 (stainless steel for steel and plywood/osb decks) for the mechanical fastening of the Sarnabar Fastening Profiles in the perimeter or roofing area of waterproofing membranes on roofing structures. 9.9 ROW TERMINATION PLATE Art.no. Type Dimension Packing Sarnafast Row Termination Plate RT 90 Ø 90 mm 50 pcs. The Sarnafast Row Termination Plate RT 90 is a zinc plated steel washer for row termination in the Sarnafast and Sarnabar system. The washer has a diameter of 90 mm and 4 holes with a diameter of 4.9 mm each Art.no. Type Dimension Packing Sarnafast Row Termination Plate RTL-90 Ø 90 mm 50 pcs. The Sarnafast Row Termination Plate RTL 90 is a zinc plated steel washer for row termination in the Sarnafast and Sarnabar system. The washer has a diameter of 90 mm and 4 holes with a diameter of 7.5 mm each. Termination of a row of fasteners in the Sarnafast and Sarnabar system in corner or perimeter areas, to be installed over the waterproofing membrane. Use 4 pieces of Sarnafast SBF -6.0 fasteners per plate. 43/66

44 Art.no. Type Dimension Packing Sarnabar load distribution plate LDP-90 Ø 90 mm 50 pcs. The Sarnafast Load Distribution Plate LDP-90 is a zinc plated steel washer for row termination in the Sarnabar system. The washer has a diameter of 90 mm and it has seven holes with a diameter of 7 mm each. Termination of a row of fasteners in the corner and perimeter area within the Sarnabar system. To be installed over the waterproofing membrane. Recommended fasteners are Sarnafast SBF Art.no. Type Dimension Packing Sarnabar SBT RTP-105 Ø 105 mm 50 pcs. The Sarnabar SBT RTP-105 is zinc plated steel washer for row termination in the Sarnabar Tube system. The washer has a diameter of 105 mm and 3 holes with a diameter of 15 mm each. Termination of a row of fasteners in the Sarnabar Tube system in corner or perimeter areas, to be installed over the waterproofing membrane. For use in combination with a soft thermal insulation GRAVEL STOP Art.no. Type Length Width Height S-Gravelstop Profile V2A mm 30 mm 100 mm S-Gravelstop Profile V2A mm 30 mm 60 mm Perforated Profile made of 1.25 mm thick stainless steel (1.4301). Used in ballasted roofing systems as gravel stop at roof perimeters or other ballast free roof areas. It can also be used as separation profile between different types of roof ballast. 44/66

45 Art.no. Type Length Colour S-Gravelstop PVC Inside Bracket 150 mm No Light grey S-Gravelstop PVC Outside Bracket 120 mm No Light grey SF T Gravelstop Inside Bracket 150 mm RAL SF T Gravelstop Inside Bracket 150 mm Beige SF T Gravelstop Outside Bracket 120 mm Beige Prefabricated bracket made of stainless steel (1.4301) and the corresponding membrane patch. To fasten the S-Gravelstop profile to the roofing membrane by hot air welding. 45/66

46 10 FALL ARREST SYSTEM 10.1 SECULINE VARIO TYPE 3 / ON CONCRETE OR CONCRETE BEAM Art.no. Type Name Height Packing Seculine Vario 300 mm 1 pcs. incl. fastener Seculine Vario 400 mm 1 pcs. incl. fastener Seculine Vario 500 mm 1 pcs. incl. fastener Seculine Vario 600 mm 1 pcs. Incl. fastener Seculine Vario 700 mm 1 pcs. incl. fastener Seculine Vario 800 mm 1 pcs. incl. fastener Seculine Vario fall arrest anchor made of stainless steel (1.4301). Permanent fall arrest anchor to screw on Concrete and concrete beam with spec. stainless steel fasteners without dowel. Concrete thickness > 120 mm, beam width > 230 mm, drill hole Ø 8 mm SECULINE VARIO TYPE 4 / ON CONCRETE Art.no. Type Name Height Packing Seculine Vario 300 mm 1 pcs. incl. fastener Seculine Vario 400 mm 1 pcs. incl. fastener Seculine Vario 500 mm 1 pcs. incl. fastener Seculine Vario 600 mm 1 pcs. incl. fastener Seculine Vario 700 mm 1 pcs. incl. fastener Setting tool To brace the compact dowel Seculine Vario fall arrest anchor made of stainless steel (1.4301). Permanent fall arrest anchor to screw on Concrete with compact dowel. Concrete thickness > 100 mm, drill hole Ø 10 mm SECULINE VARIO TYPE 5 / ON WOODEN PLANKING Art.no. Type Height Packing Seculine Vario 300 mm 1 pcs. incl. fastener Seculine Vario 400 mm 1 pcs, incl. fastener Seculine Vario 500 mm 1 pcs. incl. fastener Seculine Vario 600 mm 1 pcs. incl. fastener Seculine Vario 700 mm 1 pcs. incl. fastener Seculine Vario fall arrest anchor made of stainless steel (1.4301) Permanent fall arrest anchor to screw on wooden planking with min. thickness 24 mm. Gross density of wood min. 456 kg/m². 46/66

47 10.4 SECULINE VARIO TYPE 7 / ON WOODEN BEAM WITH COUNTER PLATE Art.no. Type Name Height Packing Seculine Vario 300 mm 1 pcs. incl. fastener Seculine Vario 400 mm 1 pcs. incl. fastener Seculine Vario 500 mm 1 pcs. incl. fastener Seculine Vario 600 mm 1 pcs. incl. fastener Seculine Vario 700 mm 1 pcs. incl. fastener Seculine Vario fall arrest anchor made of stainless steel (1.4301). Permanent fall arrest anchor to screw on wooden beam with counter plate. Max. height of wooden beam 220 mm, max. width 120 mm SECULINE VARIO TYPE 8 / ON WOODEN BEAM Art.no. Type Name Height Packing Seculine Vario 300 mm 1 pcs. incl. fastener Seculine Vario 400 mm 1 pcs. incl. fastener Seculine Vario 500 mm 1 pcs. incl. fastener Seculine Vario 600 mm 1 pcs. incl. fastener Seculine Vario 700 mm 1 pcs. incl. fastener Seculine Vario 800 mm 1 pcs. incl. fastener Seculine Vario fall arrest anchor made of stainless steel (1.4301) Permanent fall arrest anchor to screw on wooden beam with min. width 170 mm and min. height 90 mm SECULINE VARIO TYPE 9 / ON CORRUGATED METAL Art.no. Type Name Height Packing Seculine Vario 300 mm 1 pcs. incl. fastener Seculine Vario 400 mm 1 pcs. incl. fastener Seculine Vario 500 mm 1 pcs. incl. fastener Seculine Vario 600 mm 1 pcs. incl. fastener Seculine Vario 700 mm 1 pcs. incl. fastener Seculine Vario fall arrest anchor made of stainless steel (1.4301) Permanent fall arrest anchor to screw on corrugated steel decks. 47/66

48 10.7 SECULINE VARIO ANCILLARY PRODUCTS Art.no. Name Stainless steel ear Made of stainless steel (1.4301). To screw on the Seculine Vario fall arrest post. Art.no. Name Intermediate holder Made of stainless steel (1.4301). To screw on the Seculine Vario fall arrest post. Traversable intermediate holder for permanent stainless steel cable system. Art.no. Name End holder Made of stainless steel (1.4301). To screw on the Seculine Vario fall arrest post. End holder with one cable clip for permanent stainless steel cable system. Art.no. Name End holder straight Made of stainless steel (1.4301). To screw on the Seculine Vario fall arrest post. End holder straight with two cable clip for permanent stainless steel cable system. 48/66

49 Art.no. Name Corner diverter Corner diverter 135 Made of stainless steel (1.4301). To screw on the Seculine Vario fall arrest post. Traversable corner diverter for permanent stainless steel cable system. Art.no. Name End lock 90 Made of stainless steel (1.4301). To screw on the Seculine Vario fall arrest post. End holder 90 with two cable clip for permanent stainless steel cable system. Art.no. Name Stainless steel cable Made of stainless steel (1.4301). For permanent Seculine Vario cable system Art.no. Name Colour Seculine Vario Type Plate Red Red Made of PE. To screw on the Seculine Vario fall arrest post. Special hood with integrated type plate for permanent Seculine Vario stainless steel cable system. 49/66

50 Art.no. Name Runner element Made of stainless steel (1.4301). Enables traversable gliding over the intermediate holder and corner diverter in the permanent stainless steel cable system. Art.no. Name Safety Harness set Set consist of: 9 m textile rope, energy absorber, clipper and bag. Personal safety harness set 10.8 ABS POINT L3-BE / ON CONCRETE Art.no. Name Height ABS Point L3-BE mm ABS Point L3-BE mm ABS Point L3-BE mm ABS Point L3-BE mm ABS Point L3-BE is a single point with diameter 16 mm made of stainless steel (1.4301) Is used to provide permanent single point fall arrest anchor point on concrete roof deck ABS POINT LX-T / ON CORRUGATED METAL Art.no. Name Height ABS Point LX-T mm ABS Point LX-T mm ABS Point LX-T mm ABS Point LX-T is a single point with diameter 16 mm made of stainless steel (1.4301). Is used to provide permanent single point fall arrest anchor point on corrugated metal roof deck. 50/66

51 11 CHEMICAL TECHNICAL PRODUCTS 11.1 INSULATION ADHESIVE Art.no. Type Size Colour Sarnacol kg Light yellow One component Polyurethane-based humidity-hardening adhesive. Adhesive to bond insulation boards and various substrates MEMBRANE ADHESIVE Sarnacol 2170 Art.no. Type Size Colour Sarnacol kg Red Sarnacol kg Red One component nitrile rubber-based contact adhesive. Sarnacol 2170 is a contact adhesive to bond Sarnafil G-type and felt backed Sarnafil G Felt-type membranes on surfaces and Sarnafil G-type membranes in perimeter and flashing areas. Sarnacol 2142 S Art.no. Type Size Colour Sarnacol 2142 S 5 kg Blue Sarnacol 2142 S 15 kg Blue One component Polyurethane adhesive, moisture curing. Sarnacol 2142S is an adhesive to bond Sarnafil G Felt-type and Sarnafil TG 76 Felt type membranes onto various substrates. 51/66

52 Sarnacol 2152 Art.no. Type Size Colour Sarnacol 2152 AB 30 kg (A+B) White Sarnacol 2121 Two component polyurethane adhesive. Sarnacol 2152 is used on roofing waterproofing, fully adhere Sarnafil G476 membrane for ballasted roofing systems. Art.no. Type Size Colour Sarnacol kg White Sika-Trocal C-300 One component water based adhesive on a synthetic resin basis. Sarnacol 2121 is an adhesive to bond Sarnafil G-type and felt backed Sarnafil G Felt-type membranes on horizontal surfaces with slopes of up to 10. Art.no. Type Size Colour C kg Gold-brown One component polyurethane based adhesive, moisture curing. Partial bonding of Sikaplan SGK roof waterproofing membranes onto various substrates UPSTAND / PARPET ADHERD SYSTEMS Sarnacol T-660 Art.no. Type Size Colour Sarnacol T kg Yellow Sarnacol T kg Yellow One component butyl rubber-based contact adhesive. Contact adhesive to bond Sarnafil TG 66 / TS 77 membrane in the perimeter and flashing areas. 52/66

53 Sarnacol T-770 Art.no. Type Pile Colour Sarnacol T pc Yellow Sarnacol T-770 Green 16 pc Green Sarnacol T Primer L White Sarnafil Spraytool 700 CH Edition 1 pc Sarnafil Spraytool 700 EU Edition 1 pc Solvent free, polyolefin based hot melt adhesive. Hot melt adhesive to bond Sarnafil TG 66 type and Sarnafil TS 77 type membranes in perimeter and flashing areas. Sika-Trocal C-733 Art.no. Type Size Colour C kg Red C kg Red One component nitrile rubber-based contact adhesive. Contact adhesive to bond Sikaplan SG-type and in perimeter and flashing areas SPECIAL ADHESIVE Sarnacol 2116 (GRAVEL) Art.no. Type Size Colour Sarnacol kg White One component water based adhesive on a synthetic resin basis. Adhesive for bonding or binding gravel to horizontal Sarnafil G/S membranes. Sarnacol 2116 does not bond to Sarnafil T membranes and can only be used to bind gravel on horizontal Sarnafil T membranes. 53/66

54 11.5 PRIMERS Primer 600 Art.no. Type Size Colour Primer kg Black Primer kg Black One component synthetic rubber and resins based primer. Ready for use product, used as primer for applying self-adhesive Sarnavap 5000E SA or Sikaplan RV-s onto various substrates. Also used as primer for Sarnacol 2162 to bond approved thermal insulation boards and Sika-Trocal C 300 to critical substrates. Primer 780 Art.no. Type Size Colour Primer kg Light green One component water based dispersion primer. VOC Free. Ready to use product, used for applying self-adhered Membrane Sarnafil G 410- FSA / TG 76-FSA CLEANERS / SOLVENTS Sarnafil T Clean Art.no. Type Size Colour Sarnafil T Clean 2 kg Red Mixture of organic solvents. Cleaner to remove heavy soiling and adhesive residues from Sarnafil TG and TS membranes. Sarnafil T Clean is also suitabe for cleaning tools and degreasing metal sheets. 54/66

55 Sarnafil T Prep Art.no. Type Size Colour Sarnafil T Prep 5 L Yellow Sarnafil T Prep 10 L Yellow Mixture of organic solvents. Preparation of seams of Sarnafil TG and TS in order to ensure optimum seam quality. It is also suitable as general purpose cleaner to remove light dirt or bitumen residue from Sarnafil TG and TS. Sarnafil T WET Task SET Art.no. Type Size Sarnafil T WET TASK SET (x280) 1 pc Sarnafil T refill cloth (x280) 1 pc Dispenser filled with 280 white cleaning towels, designed for use along with Sarnafil T Prep. After filling the container with Sarnafil T Prep, Sarnafil T WET Task SET is suitable for seam preparation and general purpose cleaning of waterproofing membranes. Sarnafil T Seam preparation cloth Art.no. Type Size SF T Seam preparation cloth (x150) 1 pc Volume Fleece. Used for seam preparation and cleaning of Sarnafil T membranes in combination with Sarnafil T Clean and Sarnafil T Prep. 55/66

56 Solvent T 660 Art.no. Type Size Colour Solvent T L Colorless Mixture of high volatile solvents. Solvent to dilute Sarnacol T 660 adhesive and to remove adhesive residues from Sarnafil T and Sikaplan T (FPO) membranes. It is also used for cleaning tools and degreasing metal sheets. Solvent T 660 is not suitable for the seam preparation of Sarnafil T and Sikaplan T membranes. Sika-Trocal Cleaner 2000 Art.no. Type Size Colour Cleaner L Colorless Mixture of volatile solvents. Cleaner to remove local contamination from Sikaplan waterproofing membrane seams and preparation of old PVC membranes for hot air welding applications. Cleaner to prepare seams of Sikaplan PVC waterproofing membranes for hot air welding application. Not suitable to prepare PVC sheets for solvent welding application. Sika-Trocal Cleaner L 100 Art.no. Type Size Colour L kg Colorless Mixture of high volatile solvents. Cleaner to remove local contamination from Sikaplan roof waterproofing and waterproofing membrane seams and preparation of old Sikaplan PVC membranes for welding applications. Sika-Trocal Cleaner L 100 is suitable for diluting Sika-Trocal C-733 adhesive and degreasing metal sheets. Also applicable for preparation of PVC membranes for solvent welding. 56/66

57 Sarna Cleaner Art.no. Type Size Colour Sarna Cleaner 5 L Colorless Sarna Cleaner 10 L Mixture of high volatile solvents. Cleaner is used to remove heavy soiling from the seam area of Sarnafil G/S (PVC) membranes. It is also used to remove adhesive residues from the membranes and to clean tools. It is also suitable for diluting Sarnacol 2170 adhesive and degreasing metal sheets. Sarna Seam Cleaner Art.no. Type Size Colour Sarna Seam Cleaner 5 L Blue Sarna Seam Cleaner 10 L Blue Based on organic solvents (Paraffin). Seam Cleaner is used to prepare seams of Sarnafil G/S (PVC) membranes for hot air welding. It is also suitable as general purpose cleaner to remove light dirt or bitumen residue from the membrane. 57/66

58 12 TOOLS 12.1 SARNAMATIC Art.no. Type Plug SM V/3600W Schuko-plug SM V/5800W Cekon-plug SM V/4200W NEMA-plug SM 681 conversion kit 230V-400V SM 681 conversion kit 400V-230V SM 661/681 conversion kit decor profil SM 681 heating element 230V/4400W (Spare part) SM 681 heating element 400V/5500W (Spare part) Automatic hot air welding machine for synthetic sheet waterproofing membranes. The Sarnamatic -681 is suitable for the welding of all Sika Sarnafil and Sikaplan synthetic waterproofing membranes. Conversion kit Conversion kit décor Heating element 58/66

59 12.2 AUXILIARY TOOLS Art.no. Type S-Edge Chamfer tool Chamfer tool sharpener Sarnafil Gas heating gun Sika Membrane slitter Fitting Tool for Sarnabar Various tools to speed up the installation of Sarnafil and Sikaplan roofing membranes. Chamfer tool Chamfer tool sharpener Fitting tool Sarnabar Sarnafil Gas heating gun 12.3 SIKA VACUUM SEAM TEST Art.no. Type Vacuum seam test set The Sika Vacuum seam test set consists of: 1 pcs. transparent inspection dome made of acrylic glass with gasket and vacuum gauge 1 pcs. spray bottle 1 pcs. vacuum pump incl. 2 Makita storage batteries and battery charger 1 pcs. vacuum connection hose Device to check the watertightness of welding seams. 59/66

60 13 DILATEC 13.1 SARNAFIL T DILATEC Art.no. Type Width Length Colour SF T Dilatec ER300 STR 0.30 m m Beige Flexible multy-layer, synthetic sealing tape based on premium-quality flexible polyolefins (FPO) containing stabilizers, with inlay of glass non-woven and with a fabric strip at one side. End tape for Sarnafil T roof waterproofing membranes on concrete and metals. Bonded on one side with Sikadur Combiflex CF or Sikadur -31 CF / CF Slow adhesive and welded on the other side (without fabric strip) to the Sarnafil T roof waterproofing membrane SIKADUR COMBIFLEX ADHESIVE Art.no. Type Application Component Pail Combiflex adhesive normal C A+B 6 kg Combiflex adhesive rapid C A+B 6 kg Two component thixotropic adhesive based on epoxy resins and fillers. Bonding the Sarnafil T Dilatec ER300 onto various substrates. 60/66

61 14 SELANTS / PRIMER 14.1 SARNAPLAST 2235 Art.no. Type Size Packing Colour Sarnaplast 2235 Cartridge with 310ml Carton with 12 Cartridges Transparent One component colorless elastomeric silicon sealant. Sarnaplast 2235 is used to seal flashing joints, expansion joints and perimeter flashing on Sarnafil flat roofing systems PRIMER FOR SEALANT Art.no. Type Roof system Colour Primer 110 PVC Transparent Primer T 501 FPO Light yellow One component Primer. Primers are a ready for use product, used as primer for applying Sarnaplast 2235 onto absorbent Substrates, metals and the corresponding roofing membrane. 61/66

62 15 CONNECTION STRIP 15.1 SARNAFIL TG 55/TG 66 Art.no. Type Width Length Colour TG 55/TG m Up to 100 m Grey / Beige TG 55/TG m Up to 100 m Grey / Beige Flexible glass tissue reinforced multi-layer based on premium-quality flexible polyolefins (FPO) containing stabilizers. Junction/Connection strip from Sarnafil TG 66 / TS 77 (PP) roof waterproofing membranes to Sarnafil TG 55 / TS 75 (PE) roof waterproofing membranes SARNAFIL FPO/PVC Art.no. Type Width Length Colour TG 66 / PVC m Up to 100 m Beige / Light grey Flexible glass tissue reinforced multi-layer based on premium-quality flexible polyolefins (FPO) and polyvinyl chloride (PVC) containing stabilizers. Temporary junction/connection strip from Sarnafil TG 66 (PP) roof waterproofing membrane to aged Sarnafil G/S or Sikaplan (PVC) roof waterproofing membranes in ballasted flat roof systems. 62/66

63 16 SIKAGARD SIKAGARD -950 Art.no. Type Component Pail Colour A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL /66

64 A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL A+B 7 kg + 3 kg RAL 4007 Two component waterborne colored polyurethane coating. It has a flexible resin binder with PVC blocking properties. To provide a resistant coating film on mechanically fastened or adhered Sikaplan and Sarnafil PVC or Sarnafil FPO roof waterproofing membranes where different surface colors are required i.e. architectural features / design or roof graphics PRIMER FOR SIKAGARD -950 Art.no. Type Roof system Packing Colour Sikalastic Primer FPO FPO 4 x 1.0 L Yellow Sikalastic Primer PVC PVC 4 x 1.0 L Red One component primer. Ready for use products, used as primer for applying Sikagard -950 onto Sarnafil T, Sarnafil PVC and Sikaplan PVC roofing membranes. 64/66

65 17 LEGAL NOTE The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika s recommendations. in practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request. Please note; For detailed technical information, always refer to the latest Product Data Sheet (PDS) Sika Services AG TM Roofing Industriestrasse Sarnen Switzerland Version given by Armin Naef Phone: Mail: naef.armin@ch.sika.com 65/66

66 66/66