PROFORM MDO SPECIFICATION SHEET OVERLAY SYSTEM. Arclin Overlays FACE SHEET 333 MDO (MEDIUM DENSITY OVERLAY) PANEL FEATURES SPAN TABLES SPAN TABLES

Transcription

1 PROFORM MDO SPECIFICATION SHEET OVERLAY SYSTEM Arclin Overlays FACE SHEET 333 MDO (MEDIUM DENSITY OVERLAY) Resin Content 35% Base Paper Weight 41# MSF GSM 200 Core Resin Weight 22# MSF GSM 108 Total Weight 63# MSF GSM 372 Face Veneer Back Veneer Inner Plies Resin Size Thickness Edge Seal Realease Agent Stamp "B" Grade Doglas Fir Veneer "C" Grade Doglas Fir Veneer "C" Grade Veneers Phenolic Exterior Gle 48" X 96" 3/8-1 1/8 Nox-Crete Edge Flex 235 Nox-Crete Form Coating 250 APA Trademark Spport SPAN TABLES Class 1 3/4 17.5mm / 11/16 5/8 Spport 3/4 Spacing L/360 L/270 L/360 L/270 L/360 L/270 Spacing L/360 L/270 L/360 L/270 L/360 L/270 4" " " " " " " " " " " " - - Spport FACE GRAIN ACROSS SUPPORTS FACE GRAIN ACROSS SUPPORTS PANEL FEATURES SPAN TABLES Strctral 1 3/4 17.5mm / 11/16 5/8 Spport 3/4 FACE GRAIN PARALELL TO SUPPORTS 17.5mm / 11/16 5/8 FACE GRAIN PARALELL TO SUPPORTS 17.5mm / 11/16 5/8 Spacing L/360 L/270 L/360 L/270 L/360 L/270 Spacing L/360 L/270 L/360 L/270 L/360 L/270 4" " " " " " " " " " " "

2 Technical Data Sheet TM Arclin Readyform 3333 DESCRIPTION Arclin TM Readyform 3333, premim concrete form overlay, is an MDO which represents the new benchmark in concrete form overlay performance. Using advanced resin formlations, Arclin TM Readyform 3333 significantly increases performance in plywood prodcts for resable concrete forms. Arclin TM Readyform 3333 conforms to reqirements of the U.S. Prodct Standard PS1-95 for Constrction and Indstrial Plywood. Arclin TM Readyform 3333 is a phenolic resin impregnated overlay specifically designed to provide a smooth srface on engineered wood prodcts to allow for mltiple rese of panels in concrete pors. PHYSICAL PROPERTIES AND SPECIFICATIONS North American Standard Export Metric Standard Color Kraft Brown Kraft Brown Resin content 35% 35% Raw paper weight 41# /MSF 200 gsm Finished paper weight 74# /MSF 362 gsm Thickness before pressing in mm Thickness after pressing in mm Nmber of 4' x 8' sheets per bndle 1, Total area per standard 4' x 8' bndle 34,375 ft.² 2,874 m² Total gross weight per 4' x 8' bndle 2,690 lbs. 1,223 kg TECHNICAL INFORMATION STORAGE CONDITIONS PRESSING SCHEDULE PANEL EDGE SEAL RELEASE AGENT We recommend storage in a cool, dry place with the original wrapping intact. Ideal conditions are less than 50% relative hmidity, and 25 C (77 F) or below. Contact Arclin s technical staff before sing a prodct over one year old. Please conslt Arclin s technical personnel to develop the best pressing conditions for yor application. Seal all edges with a high qality edge-sealer to provide moistre protection and resistance. For optimm performance we recommend concrete form panels to be coated with Nox-Crete or an eqivalent chemically active release agent.

3 STANDARD SIZES Sheets Size North American Standard Export Metric Standard 4' x 8' 50" x 99" 1270 x 2515 mm 4' x 10' 50" x 124" 1270 x 3150 mm 4' x 12' 50" x 148" 1270 x 3759 mm 5' x 8' 62" x 99" 1574 x 2515 mm 5' x 10' 62" x 124" 1574 x 3150 mm 5' x 12' 62" x 148" 1574 x 3759 mm Rolls Size North American Standard Export Metric Standard Width Feet Width Inches Length Feet Diameter Inches Width mm Length M Diameter mm , , Other sizes available on reqest depending on paper availability and commercial agreements Typical container configrations Export (can vary) Container Sheets per bndle Bndles per container Rolls per container 20 foot foot

4 P R O D U C T D A T A EDGE-FLEX 235 Maximm performance edge sealer specifically formlated for se on concrete form panels. HOW IT WORKS EDGE-FLEX 235 prevents the absorption of highly alkaline concrete bleed water into the edges of plywood and oriented strand board (OSB) concrete form panels by penetrating the edges and sealing off the wood fibers with an extremely drable, yet very elastic, film which expands and contracts with the sbstrate. APPLICATIONS Use in sealing the edges of all types of manfactred wood form panels, inclding plywood and oriented strand board (OSB) to be sed in concrete forming applications. Use to seal all field-ct panel edges and snap-tie holes. For reapplication over poor performing mill applied edge sealants. Essential for se on all manfactred wood form panels to be sed in the prodction of architectral concrete. ADVANTAGES Completely resistant to the higher alkalinity of many modern concrete mix designs. Redces alkaline water absorption throgh panel edges by p to 95%. By minimizing water absorption into the panel edges, wood sgar and tannin migration is simltaneosly minimized, redcing concrete color variations, staining and concrete srface dsting. Significantly redces panel edge swelling and the related elevation variations from panel to panel that are commonly seen in gang forming applications. Panel elevation variations yield nsightly concrete srface elevation variations that are often nacceptable to owners and are costly to repair. Panel life is greatly increased. This is especially tre with higher performance overlaid panels (HDO, PSF and CBF) where panel failre almost always originates at the edges. Provides excellent resistance to ltra-violet radiation from the sn. Exceptional resistance to commonly sed form oils and form release agents. DOT classified as non-flammable and non-combstible and is considered safe to apply nder most manfactring or field conditions. Unlike competitive edge sealers, EDGE-FLEX 235 is not only available to plywood and OSB prodcers, bt is also available to concrete forming contractors throgh local concrete form and accessory distribtors throghot North America. Green Engineered better for health and the environment. Meets all federal and state VOC reqirements. PRECAUTIONS Do not apply to wet sbstrates. Do not apply to sbstrates that have been covered with a form oil or other coating/srface treatment that cold interfere with the proper penetration and adhesion of EDGE-FLEX 235. Do not overapply. Excess application of EDGE-FLEX 235 that reslts in rns, drips or excess on offset panel edges can gle stacked panels together nless excess is removed from the face and back of panels before drying. Protect from freezing. If allowed to freeze, prodct packaging may rptre and the emlsion stability of this prodct may be affected, making it difficlt to keep prodct mixed dring application. Prodct which is sspected of freezing shold not be sed. Verify that prodct is within the USE BY date stated on prodct packaging. Do not se expired prodct. The se of expired prodct may reslt in poor prodct performance or failre. Treated sbstrates shold be protected from exposre to water and freezing temperatres ntil the EDGE-FLEX 235 application has completely dried. Prodct dry time will vary depending on the ambient temperatre and relative hmidity at the time of application. The dry time at 70 0 F (21 0 C) and 50% relative hmidity is approximately 1 hor. USE INSTRUCTIONS Reqest crrent prodct literatre, labels and material safety data sheets from manfactrer and read thoroghly before prodct se. EDGE-FLEX 235 form treatments n o x - c r e t tm e chemical soltions to concrete problems

5 Site environmental conditions, sbstrate conditions and constrction have a major impact on prodct selection, application methods, procedres and rates, appearance and performance. Prodct literatre provides general information applicable to some conditions. However, an adeqate site test application by the prchaser or installer in advance of field scale se is mandatory (irrespective of any other verbal or written representations) to verify that prodct and qantities prchased can be satisfactorily applied and will achieve desired appearance and performance nder intended se conditions. Ambient air and sbstrate temperatres mst be in excess of 40 0 F (5 0 C). Mix thoroghly before sing and intermittently dring se. Apply to panel edges sing a brsh, roller or airless spray eqipment in two sccessive coats, applying the second coat immediately after applying the first coat (wet on wet). Avoid rns or drips in both coats. The application rate of EDGE-FLEX 235 varies with the sbstrate porosity and saw ct roghness. Typical combined effective application rate for both coats is sf/gal ( sm/l) for optimm masking properties and performance. Application eqipment shold be cleaned with water immediately after se. EDGE-FLEX 235 develops a skin within a few mintes after application. Once this skin develops, water will no longer remove the coating and an aromatic solvent sch as xylene mst be sed. TECHNICAL DATA Blk Density lbs/gal (1.02 kg/l) Freeze Point F (0 0 C) ph...10 Brookfield Viscosity cp Freeze/Thaw Stability... Poor Average Improvement In Water Weight Gain Compared To Unsealed Control 3.5 Hors 10 Hors 24 Hors Percent 414% 368% 261% Improvement PACKAGING Packaged in 1 gal (3.8 l) jgs, 5 gal (19 l) pails, 55 gal (208 l) drms and 275 gal (1,041 l) blk totes. SHELF LIFE Shelf life is nine months. Use before the USE BY date stated on prodct packaging. HANDLING/STORAGE Store in a dry location within a temperatre range between 40 0 F (4 0 C) and F (38 0 C). AVAILABILITY & TECHNICAL SERVICES In addition to corporate offices in Omaha, Nebraska, NOX- CRETE Prodcts Grop also maintains regional offices and distribtion centers in principal markets throghot the world. For sorce or technical information, phone (800) or (402) LIMITED WARRANTY NOTICE-READ CAREFULLY CONDITIONS OF SALE NOX-CRETE offers this prodct for sale sbject to, and Byer and all sers are deemed to have accepted, the following conditions of sale and limited warranty which may only be varied by written agreement of a dly athorized corporate officer of NOX-CRETE. No other representative of or for NOX-CRETE is athorized to grant any warranty or to waive limitation of liability set forth below. WARRANTY LIMITATION NOX-CRETE warrants this prodct to be free of manfactring defects. If the prodct when prchased was defective and was within se period indicated on container or carton, when sed, NOX-CRETE will replace the defective prodct with new prodct withot charge to the prchaser. NOX-CRETE makes NO OTHER WARRANTY, either express or implied, concerning this prodct. There is NO WARRANTY OF MERCHANTABILITY. In no case shall NOX- CRETE be liable for special, indirect or conseqential damages reslting from the se or handling of the prodct and no claim of any kind shall be greater in amont than the prchase price of the prodct in respect of which damages are claimed. INHERENT RISKS NOX-CRETE MAKES NO WARRANTY WITH RESPECT TO THE PERFORMANCE OF the prodct AFTER IT IS APPLIED BY THE PURCHASER, AND PURCHASER ASSUMES ALL RISKS ASSOCIATED WITH THE USE OR APPLICATION OF THE PRODUCT. Updated 06/16/09. This version spersedes all previos versions. EDGE-FLEX 235 p. 2 NOX-CRETE PRODUCTS GROUP 1444 S. 20th St. P.O. Box 8102 Omaha, Nebraska USA PHONE: (800) NOX-CRETE ( ) or (402) FAX: (800) FAX-ORDER ( )

6 P R O D U C T D A T A UTILITY RELEASE CONCENTRATE is an economical, concentrated concrete form release agent that contains a patented, chemically reactive technology that reacts with the alkalis in concrete to form a metallic soap film that prevents form sticking and concrete bildp on the form srface. Utility Release Concentrate (PLYWOOD Mill Use) Use on BB Plyform or other concrete form panels sing existing roll coaters or spray systems at crrent application rate. Alternative to higher cost petrolem oils crrently being sed. Sperior performance to petrolem oils. Easily dilted and stays mixed well. 100% biodegradable. Eliminates oil bildp on application machinery and floors. Dries fast and is not slippery. Allows for edge sealing to be done after oiling. Eliminates need for blk oil tanks. Nonflammable. Very low odor. Increases panel drability. Concentrated, chemically active, water based, general prpose concrete form release agent. HOW IT WORKS APPLICATIONS ADVANTAGES Resists removal from panel by normal rain showers. Redces form maintenance costs by redcing concrete bildp. Meets all federal and state VOC reqirements. PRECAUTIONS Prodct is spplied in concentrated form and mst be dilted with water prior to application on panels. UTILITY RELEASE CONCENTRATE does not reqire protection from freezing temperatres nless dilted with water. Once dilted, do not allow prodct to completely freeze or it may be rendered nsitable for se. USE INSTRUCTIONS Reqest crrent prodct literatre, labels and material safety data sheets from manfactrer and read thoroghly before prodct se. UTILITY RELEASE CONCENTRATE mst be dilted prior to se. The diltion rate is one part UTILITY RELEASE CONCENTRATE to eight parts water. To facilitate this diltion reqirement, NOX-CRETE will frnish at no charge a metering system that will accrately dilte and mix the two components and deliver them to the oiling system in a ready-to-se condition. The metering system described above is typically located in close proximity to the mill oiling system. Mill reqirements for the metering system inclde: 1) 3/4-inch water line with a minimm of 60 psi. 2) 1/2-inch air line with a minimm of 80 psi. 3) One 110-volt, 15-amp circit with dplex otlet and one 220-volt, 30-amp circit withot otlet. 4) If UTILITY RELEASE CONCENTRATE is prchased in totes, mill tote placement mst be within 15 feet of metering system location. Panel srface temperatre mst be in excess of 32 0 F (0 0 C) to prevent prodct from freezing dring application. UTILITY RELEASE CONCENTRATE can be applied with a conventional roll coater or spray system. The recommended application rate is sf/gal ( sm/l). Application eqipment and overspray can be cleaned with soap and water. TECHNICAL DATA Blk Density lbs./gal. (0.92 kg/l) Flash Point...>200 F (>93 C) VOC... <150 g/l VP... <10.0 mmhg PACKAGING Prodct is spplied in 275 gal (1040 l) totes or in blk. UTILITY RELEASE CONCENTRATE (PLYWOOD MILL USE) form release agents n o x - c r e t tm e chemical soltions to concrete problems

7 SHELF LIFE One year from date of manfactre. Use before expiration date stenciled on the container. HANDLING/STORAGE Store prodct in a dry area away from excessive heat, sparks and open flame. If dilted with water, protect from freezing. AVAILABILITY & TECHNICAL SERVICES In addition to corporate offices in Omaha, Nebraska, NOX-CRETE Prodcts Grop maintains regional offices and distribtion centers in principal markets throghot the world. For sorce or technical information, phone (800) or (402) LIMITED WARRANTY NOTICE-READ CAREFULLY CONDITIONS OF SALE NOX-CRETE offers this prodct for sale sbject to, and Byer and all sers are deemed to have accepted, the following conditions of sale and limited warranty which may only be varied by written agreement of a dly athorized corporate officer of NOX-CRETE. No other representative of or for NOX-CRETE is athorized to grant any warranty or to waive limitation of liability set forth below. WARRANTY LIMITATION NOX-CRETE warrants this prodct to be free of manfactring defects. If the prodct when prchased was defective and was within se period indicated on container or carton, when sed, NOX-CRETE will replace the defective prodct with new prodct withot charge to the prchaser. NOX-CRETE makes NO OTHER WARRANTY, either express or implied, concerning this prodct. There is NO WARRANTY OF MERCHANTABILITY. In no case shall NOX- CRETE be liable for special, indirect or conseqential damages reslting from the se or handling of the prodct and no claim of any kind shall be greater in amont than the prchase price of the prodct in respect of which damages are claimed. INHERENT RISKS NOX-CRETE MAKES NO WARRANTY WITH RESPECT TO THE PERFORMANCE OF THE PRODUCT AFTER IT IS APPLIED BY THE PURCHASER, AND PURCHASER ASSUMES ALL RISKS ASSOCIATED WITH THE USE OR APPLICATION OF THE PRODUCT. Updated 12/05/05. This version spersedes all previos versions. Utility Release Concentrate - Mill Use p. 2 NOX-CRETE PRODUCTS GROUP 1444 S. 20th St. P.O. Box 8102 Omaha, Nebraska USA PHONE: (800) NOX-CRETE ( ) or (402) FAX: (800) FAX-ORDER ( )

8 P R O D U C T D A T A UTILITY RELEASE UTILITY RELEASE is an economical, sper concentrated concrete form release agent that chemically reacts with the alkalies in concrete to form a slippery soap film that prevents form sticking and concrete bildp on form srfaces. Sper concentrated, chemically active, water based, general prpose concrete form release agent. HOW IT WORKS APPLICATIONS Use on bare plywood, plywood faced handset forms and steel. Use in commercial and residential concrete forming applications. ADVANTAGES Economical alternative to higher cost specialty type form release agents where cost per gallon considerations otweigh performance reqirements. Chemically active. Dries fast and is not slippery. Resists removal by normal rain showers. Easily dilted and stays mixed well. Can be dilted with water, kerosene or fel oil. Variable diltion rate allows ser the freedom to maximize prodct performance on many different forming sbstrates by simply adjsting the dilent mix ratio. Performs well on plywood and steel form srfaces. Redces form maintenance costs by redcing concrete bildp. Can also be sed as a form maintenance coating to soften concrete bildp on forms and eqipment by simply redcing the diltion ratio. Will not freeze nless dilted with water. Low odor - does not contain fel oil. Nonflammable. Green Engineered better for health and the environment. Meets all federal and state VOC reqirements. PRECAUTIONS Water based, chemically active form release agents are not visible on applied srfaces once dry. This is normal and does not affect release agent performance. After form stripping, a white, powdery film will be present on form srfaces. This cases no adverse affects on the form or the concrete and shold not be confsed with bildp. Not recommended where forms are to be removed in less than 12 hors, nless artificial heat is sed to hasten concrete cre. UTILITY RELEASE is not freezable nless dilted with water. If dilted with water and allowed to freeze, prodct may be rendered nsitable for se. Do not se in the manfactre of architectral concrete withot prior approval of a field-scale mock-p. Protect coated form srfaces from rain for a minimm of 2 hors or ntil UTILITY RELEASE has dried. Dilting UTILITY RELEASE with a petrolem distillate sch as kerosene or fel oil may reslt in exceeding federal or state VOC reglations. Contact NOX-CRETE for specific information concerning yor application. USE INSTRUCTIONS Reqest crrent prodct literatre, labels and material safety data sheets from manfactrer and read thoroghly before prodct se. Site environmental conditions, sbstrate conditions and constrction have a major effect on prodct selection, application methods, procedres and rates, appearance and performance. Prodct literatre provides general information applicable to some conditions. However, an adeqate site test application by the prchaser or installer in advance of field scale se is mandatory (irrespective of any other verbal or written representations) to verify that prodct and qantities prchased can be satisfactorily applied and will achieve desired appearance and performance nder intended se conditions. Form srfaces do not have to be completely dry in order to apply UTILITY RELEASE. Small qantities of water on the form srface, sch as dew, will not affect its performance. UTILITY RELEASE mst be dilted prior to se. Prodct may be dilted with water, kerosene or fel oil (see PRECAUTIONS). Typical diltion rate is one part UTILITY RELEASE to seven parts dilent, or in other words, one qart UTILITY RELEASE to seven UTILITY RELEASE form release agents n o x - c r e t tm e chemical soltions to concrete problems

9 qarts dilent; one gallon UTILITY RELEASE to seven gallons dilent; etc. To simplify diltion of UTILITY RELEASE with water, se NOX-CRETE S MIX STATION which provides accrate, dependable and economical diltion and mixing performance. Comes eqipped with mixing plgs to accommodate varying prodct temperatre conditions. See chart below. UTILITY RELEASE is most easily applied sing NOX- CRETE S low pressre, hand pmp THE PERFECT FORM & CONCRETE SPRAYER or THE IDEAL FORM & CONCRETE SPRAYER. Best reslts are obtained when a niform application of UTILITY RELEASE is applied to all form srfaces. Allow coated form srfaces to adeqately dry prior to placing concrete. Application rate reqired is a fnction of form composition, srface textre and porosity. It shold be verified with test application. Typical range is 400-2,000 sf/gal. (10-50 sm/l). Do not over apply. Excess material, rns and pddles can adversely affect performance and shold be picked p promptly with rags. Ambient form srface temperatre mst be in excess of 32 0 F (0 0 C) to prevent prodct from freezing if dilted with water. Prevent material overspray from contacting reinforcing steel and/or tensioning cables. Application eqipment and overspray can be cleaned with soap and water. For se as a maintenance coating, dilte one part UTILITY RELEASE to three parts water or other dilent. TECHNICAL DATA Blk Density lbs./gal. (0.92 kg/l) Flash Point...>200 F (>93 C) Color Odor... Pleasant VOC... <150 g/l VP... <10.0 mmhg PACKAGING Prodct is packaged in 1 gal. (3.8 l) jgs, 5 gal. (19 l) pails and 55 gal. (208 l) drms. SHELF LIFE Shelf life is one year. Use before the USE BY date stated on prodct packaging. HANDLING/STORAGE Store in a dry location within a temperatre range between 40 0 F (4 0 C) and F (38 0 C). AVAILABILITY & TECHNICAL SERVICES In addition to corporate offices in Omaha, Nebraska, NOX-CRETE Prodcts Grop maintains regional offices and distribtion centers in principal markets throghot the world. For sorce or technical information, phone (800) or (402) LIMITED WARRANTY NOTICE-READ CAREFULLY CONDITIONS OF SALE NOX-CRETE offers this prodct for sale sbject to, and Byer and all sers are deemed to have accepted, the following conditions of sale and limited warranty which may only be varied by written agreement of a dly athorized corporate officer of NOX-CRETE. No other representative of or for NOX-CRETE is athorized to grant any warranty or to waive limitation of liability set forth below. WARRANTY LIMITATION NOX-CRETE warrants this prodct to be free of manfactring defects. If the prodct when prchased was defective and was within se period indicated on container or carton, when sed, NOX-CRETE will replace the defective prodct with new prodct withot charge to the prchaser. NOX-CRETE makes NO OTHER WARRANTY, either express or implied, concerning this prodct. There is NO WARRANTY OF MERCHANTABILITY. In no case shall NOX- CRETE be liable for special, indirect or conseqential damages reslting from the se or handling of the prodct and no claim of any kind shall be greater in amont than the prchase price of the prodct in respect of which damages are claimed. INHERENT RISKS NOX-CRETE MAKES NO WARRANTY WITH RESPECT TO THE PERFORMANCE OF THE PRODUCT AFTER IT IS APPLIED BY THE PURCHASER, AND PURCHASER ASSUMES ALL RISKS ASSOCIATED WITH THE USE OR APPLICATION OF THE PRODUCT. Release Agent Use 7:1 Recommended Diltion Ratio Plg # Prodct Temperatre F (4.4 0 C) F (11 0 C) F (11 0 C) F ( C) Mix Station Plg Chart To Ensre Proper Diltion Ratio, Select The Proper Mixing Plg Based On The Actal Temperatre Of The Prodct. Prodct Temperatre And Ambient Temperatre Are Not Necessarily The Same. Maintenance Coating Use 2:1 Recommended Diltion Ratio Plg # Prodct Temperatre Remove Plg 40 0 F (4.4 0 C) F ( C) Updated 07/31/09. This version spersedes all previos versions. Utility Release p. 2 NOX-CRETE PRODUCTS GROUP 1444 S. 20th St. P.O. Box 8102 Omaha, Nebraska USA PHONE: (800) NOX-CRETE ( ) or (402) FAX: (800) FAX-ORDER ( )