CONTROLTEST LTD INSPECTION BODY TYPE A
|
|
- Asher Foster
- 6 years ago
- Views:
Transcription
1 TYPE A PRESENTATION Page 1 of 12
2 CONTROLTEST LTD TYPE A Company Profile About us Controltest Ltd was founded in It is well-known at the Bulgarian market and abroad with services rendered in the field of nondestructive, destructive testing and electrical measurements, life prediction of materials and structures, integrated quality systems consultants, technical Inspections and survey, as well as conformity assessment of transportable pressure equipment(тped) and pressure equipment (PED) The company central office is situated in the capital of Bulgaria city of Sofia. There are nine more laboratories in Bulgaria, Macedonia and Croatia located as follows: North of Bulgaria City of Pleven (two labs), City of Ruse and City of Vratza Central part of Bulgaria City of Plovdiv (a temporary one) and City of Stara Zagora East of Bulgaria City of Burgas ( Controltest-Gama Ltd. a joint venture company, partnership with Gama Ltd) Macedonia City of Skopje (a temporary one) Croatia City of Zagreb Accreditations, Licenses and Certificates: 1. Since its foundation the company is accredited by Standardization and metrology committee at the Council of Ministers according to BDS EN and BDS EN In 1999 the company is accredited by the Bulgarian Accreditation Service at the Standardization and metrology committee (certificate 5-12/ ). At the present moment Controltest Ltd is accredited by the Executive Agency Bulgarian accreditation service according BDS EN 17020/2012 as an Inspection Body type A (Certificate 52OKA) 2. Since March 1998 Controltest Ltd is the first Bulgarian company in this field with a certified Quality Management System according ISO 9002:1994 in the field of NDT (approval certificate ), Since March 2001 Controltest Ltd is certified according ISO 9001:2000(approval certificate ) by Lloyds Register Quality Assurance and subsequently according ISO 9001: Since June 2014 Controltest Ltd is certified according: ISO 14001:2004 (approval certificate 72931) by NQA. OHSAS 18001:2007(approval certificate 72932) by NQA 4. Since May 2001 Controltest Ltd is authorized body for Technical Survey of High Risk Equipment /reg. 228/by the Standardization and Metrologies State Agency according PMS 187/ and licensed for the same activities since 30 Oct Controltest Ltd is a Notified by European Commission Body number 2413 for Conformity Assessment of: Since October 2012 according to Directive 2010/35/EU Transportable Pressure Equipment (TPED). Since December 2014 according to Pressure Equipment Directive 97/23/EC (PED) and since August 2016 according to Pressure Equipment Directive 2014/68/ EU (PED). 6. Since August 2015 Controltest Ltd is the first company certified according: ISO 55001: Page 2 of 12
3 TYPE A 1. Radiographic testing 1.1. Conventional radiography 1.2. Computed radiography 2. Ultrasonic testing 3. Ultrasonic thickness measurements 4. Dye Penetrant testing 5. Magnetic-Particle testing 6. Magnetic method for testing of steel ropes 7. Visual testing 8. Leak testing 8.1. Pneumatic testing / Bubble testing; Vacuum Box testing 8.2. Pressure testing of welded joints 8.3. Pressure strength testing with and without bursting 9. Continuity of coatings and insulation, insulation disruptive voltage 10. Vibration measurements 11. Measuring of shafts concentricity 12. Acoustic Emission 1. Mechanical properties: 1.1. Tensile test 1.2. Compression test 1.3. Shear test 1.4. Bending test 1.5. Charpy impact test 1. Loop impedance "phase-protective conductor" 2. Resistance of Earthing systems 3. Resistance of lightning protection systems 1. Boilers steam and water heating with power over 116.3kW 2. Metal vessels for fluids in group 2 operating at: PS<16bar; TS<200 C and 100<V x PS< Vessels for refrigerating systems /35/EU Transportable Pressure Equipment Directive /ТРЕD/. 1. Dimensional and document control. 2. Witness of tests and trial assembly of equipment. Activities: Non Destructive Testing: Destructive methods Electrical measurements up to 1000 V 13. Thermal camera services 14. Eddy Current testing Size and location of surface and subsurface discontinuities Thickness measurements of coatings over ferrous and non-ferrous metal Sorting of metal materials 15. Hardness test: Vickers Rockwell Brinell Shore 16. Dimensional measurements. 17. Chemical analysis: Atomic emission spectrometry of carbon and stainless steel (incl. C, P, S ), aluminum alloys X-Ray spectrometry of steel, aluminum and brass alloys. 2. Metallography of welded joints and base metal: 2.1. Microstructure 2.2. Macrostructure 4. Insulation resistance 5. Safety switches / FI circuit breakers - contact voltage, grounding resistance, tripping time and tripping current Technical survey of High risk equipment 4. Pipelines for steam 6 bar<ps<80 bar and hot water 110 С<TS<450 С and 100<DxPS 5. Gas equipment and installations 6. Lifting systems and mobile platforms Notified Body No.2413 as per Directive /68/EU Pressure Equipment Directive /РЕD/ Approval of permanent joining procedures. Approval of permanent joining personnel. Approval of non-destructive testing personnel according to Annex I, Technical Inspections and Supervising control 3. Inspection of processes, packaging and shipment preparation of final products. Determining Residual Resource of materials and structures Integrated Quality Systems Consultants Page 3 of 12
4 TYPE A Our staff The total number of specialists working for the company is about 53 and 40% of them are with university degree. Most of the specialists are properly trained NDT operators and certified according to EN 473 by TÜV Rhainland Bulgaria, as follows: Certification Level III Level II Qualification Radiographic Testing /RT/ Ultrasonic Testing /UT/ Dye Penetrant Testing /PT/ Magnetic Particle Testing /MT/ Visual Testing /VT/ 2 16 Leak Testing /LT/ 6 2 Welding engineers 4 Main applications: Storage and transportation tanks; Steam and water heating, boilers, Pressure vessels and equipment; Thermal Power Plants, Hydro Power Plants, Nuclear Power Plants and Pumped Storage Power Plants, Oil and Gas pipelines and equipment; Steam and hydro turbines; Lifting equipment; Industrial refrigeration systems; Produced by metal, polymer and composite materials by casting, forging, rolling, riveting, welding, soldering/brazing in automobile, shipbuilding, machine building, chemical, civil engineering and construction industries etc. Partners: Controltest Ltd. is in a partnership relationship with A+RTD since Company is one of the largest worldwide in the field of testing and in particular - innovative testing methods. Our cooperation with this company is mainly in the field of non-conventional methods and equipment for materials testing. S&Q Mart Ltd. is our main partner on the Turkish market since Company is one of the largest NDT and Inspection company on the Turkish market. IPSI, France is our significant NDT equipment and consumables. Some of our main NDT equipment and consumables suppliers are as follows: OLIMPUS NDT Products and Systems DURR NDT OMEL NDT Main company projects 1. Power Stations nondestructive and destructive testing, metallographic analyses, chemical analyses at: Pipelines; Boilers; Heat exchangers; Steam and water turbines; Cylindrical steel tanks; Heavy duty equipment; Distribution pipelines etc. as follows: - NPP KOZLODUI, Bulgaria ongoing project for Block 6 Turbines and Super heaters life extension up to 60 years. - TPP at LUKOIL REFINERY Burgas, Bulgaria - Numerous Heat Exchangers at Aurubis AS Pirdop and TPP Maritza East I Galabovo - Numerous elements of Mining Equipment at HEM AS Pleven - Inspections of Mining Equipment at Metacom AS Pleven- Metso Minerals AS USA Other TPP Projects are as follows: Page 4 of 12
5 TYPE A Thermal power Plant Sofia Iztok Thermal power Plant Sofia Sever Thermal power Plant Bobovdol Thermal power Plant Pleven Thermal power Plant Gabrovo Thermal power Plant Shumen Thermal power Plant Plovdiv sever Thermal power Plant Sliven Thermal power Plant Kremikovtzi Sofia Thermal power Plant AURUBIS Pirdop Thermal power Plant Paper factory Stamboliiski Thermal power Plant in Turkey (together with S&Q Mart Turkey) Thermal power Plant Maritza East І Maritza East ІІ аnd Maritza East ІІІ Thermal power Plant REK Bitola, Makedonia Boiler at: Led and Zink Complex - Plovdiv 2. Gas and oil pipelines and equipment radiographic, magnetic-particle and ultrasonic nondestructive testing Himengineering Ltd. CLK Ihtiman Bulgaria; Vuzhod Ltd. Trudovetz Bulgaria, city distribution gas pipelines; Bulgargas AS gas pipeline Devetaki Sevlievo, Bulgaria; Sevlievo Gas AS Sevlievo city distribution gas pipelines; Kostadin Mechkov Ltd. Plovdiv several gas pipelines for clients as CITROEN, LIBHER etc. as well as a number of LPG and petrol filling stations. Storko AS Pleven; Sevlievo Gas AS- Sevlievo Gradnitza; Machine Building Factory Pazardjik; Textile mills Elin Pelin; Lukoil AS LPG and petrol filling stations; OMV LPG and petrol filling stations; Beevi Brothers Ltd. LPG and petrol filling stations; Ecopetroleum AS LPG and petrol filling stations; UMRAN Steel Pipes AS Turkey automatic and manual ultrasonic testing of SAW and ERW API 5L pipes for great number of clients all over the world; TUBEMEUSE Industries AS Belgium automatic and manual ultrasonic testing of SAW API 5L pipes for different European clients; Petreco S. a. r. l. England x-ray crawler testing of on-shore gas pipeline Varna Provadia and the offshore part of the project together with RTD Holland Bulgargas AS manual and automatic scanning of located corrosion (together with RTD Holland) Research and Production of Oil and Gas AS Pleven- gas pipelines. Bulgargas AS inspection of aircraft engines at the compressor stations of transition gas pipelines. Blue Stream Project - evaluation of radiographic films at the compressor station (together with S&Q Mart AS Turkey); Kolos Ltd. LPG tanks for vehicles; Lloyds Register of Shipping LPG tanks for vehicles; Ministry of Transport Republic of Bulgaria great number of tanks for lorry trucks according international convention ADR; Police Research dept. technical expertise for LPG appliances and incidents; Transition gas pipeline Komotini-Alexandroupolis Greece, NDT together with Gasstroymontaj JSC Different pipe isometrics at KCM, Plovdiv Page 5 of 12
6 TYPE A Different pipe isometrics for Belgium, France and Holland in concert with CPB Bulgaria Ltd., brunch of CONTECH, Belgium. Heavy residue process complex first phase project at Lukoil Neftochim Burgas client Sices Polska and Technip Italy 3. Tanks and pressure vessels non-destructive testing, in-service and out-of service inspections State reserve and War-Time Stocks Bulgaria inspection of steel cylindrical tanks at tank farm Polikraishte, Anton, Sliven Parvomai Bulgaria; OMV supervising erection of vertical steel tanks at tank farm Ilientzy Sofia; OMV inspection of vertical cylindrical tanks in tank farm Vidin ; OMV technical expertise of horizontal steel tanks at petrol filling stations in Veliko Tarnovo and Pleven Bulgaria; Sofia Airport - inspection of vertical steel cylindrical tanks; Fraport - Varna Airport inspection of vertical steel cylindrical tanks; Fraport - Burgas Airport - inspection of vertical steel cylindrical tanks; Karlsberg Blagoevgrad - pressure vessels; Air Liquid AS Pirdop pressure vessels and pipelines; Mitsubishi Heavy Industries Japan erection of tank farm vertical steel cylindrical tanks at Al Zara Power Station Syria; Ecopetrolium AS erection of tank farm with vertical steel cylindrical tanks Vidin Bulgaria and inspection of vertical steel cylindrical tanks in Vratza, Botevgrad and cities; Petrol AS inspection of vertical steel cylindrical tanks in tank farms Sofia and Plovdiv Bulgaria; Thermal Power Station Plovdiv North inspection of vertical steel cylindrical tanks; Lloids Register of Shipping - stainless steel cylindrical tanks for food processing industry; Kozloduy NPP - main electricity generating plant in Bulgaria; TPP Maritza East 1 inspection of vertical steel cylindrical storage tanks and absorbers / erection and inspection according API 650 Standard/ Tomica metal Ltd. stainless steel cylindrical and spherical pressure vessels; Hranmash AS pressure vessels for export; Heineken - ( Ariana Sofia and Zagorka Stara Zagora) beer breweries pressure vessels; Interbrew pressure vessels; Proteh Ltd. Provadia testing of pressure vessels for Lukoil, Uhde-Germany, ALSTOM, Melrose Resources Egypt etc. HEM JSC Pleven - testing of pressure vessels for Lukoil and many other clients PETKIM Petro Chemical Holding Ltd. Turkey, together with S&Q Mart Turkey 4. Cranes, elevators and other lifting equipment electrical measurements, nondestructive testing and technical inspection. - NPP KOZLODUI AS Bulgaria, ongoing Project for full Inspection and Life Prediction of two t. cranes. - Full Inspection of many cranes produced for Russia at Balkansko Eho AS Gabrovo - Full Inspection of cranes at Leiarmash AS Sofia - Full Inspection of cranes at Stomana Industries AS Pernik - Full Inspection of cranes concrete pumps at HOLCIM Bulgaria AS Vratza, Plovdiv and Sofia Other crane projects as follows: Page 6 of 12
7 TYPE A YTONG Bulgaria AS Sofia AURUBIS AS Pirdop; Hundai Trafo AS Sofia; Kremikovtzi Mining AS Sofia; Kremikovtzi AS Sofia; MONEK IUG AS mining equipment; ALEX Ltd. Sofia elevators building company; TEHNOS Ltd. Sofia elevators building company; Electrical Transport Sofia; Heineken and Ariana Sofia (beer breweries) Chelopech Mining, Chelopech; Elprom ZEM" Co. / IHB Electric Co, Sofia Elatzite Med Chelopech and Etropole, Bulgaria. Interbrew _ Kamenitza Plovdiv; Astika Haskovo; Plevensko pivo Pleven (beer breweries); 5. Chemical machine building and mining industries nondestructive and destructive testing. Mondi Packaging Stamboliiski- paper factory annular contract (some of the projects together with SAQ Control Sweden, Det Norske Veritas Sweden, METSO Finland) Maritza mines AS heavy duty equipment; Nuovo Pignone AS Italy castings at Leiarmash AS Sofia Lurgi Bishoff AS Germany extension of sulphur acid department at UMICORE AS Pirdop (together with TUV Rheinland Bulgaria) METACOM AS Pleven castings; AURUBIS AS Pirdop; VAPTZAROV HYDRO AS Pleven hydro units for G. E. Norway Sopharma AS Sofia annular contract; Unipharm AS Sofia NDT of pressure equipment; Pharmatcia Dupnitza AS _ NDT of pressure equipment; Projects for different clients as Alstom Norwey, Projeco Italy, ENEL and many others at HEM - Chemical Industry Construction and repair shop, Pleven; Many projects for different clients at KZU ZLMK Pressures Vessels and steal structure production shop, Septemvri - VATECH HYDRO Austria, Risk Engineering Bulgaria; and many others. 6. Transportation lines and ski lifts nondestructive and magnetic testing. Skopje and Kichevo, Makedonia client Cirko Dodoel Ski center "Bansko" Ski center "Pamporovo" Ski center "Vitosha" Ski center "Chepelare" Sky Lift - Sopot " - "Center Region Group" LTD Coal mine "Cherno More"-Bourgas JSC Coal mine "Bobov Dol" JSC Coal mine "Balkan-2000" JSC "Evromangan" JSC "Marbas" JSC Solvay - Sodi JSC Plevenski Cement (Holcim Bulgaria) JSC Chelopech Mining EAD TPP Maritsa East 2 EAD AURUBIS AS Pirdop; PVL Nezabravka, Sopot- Centre Region Group Ltd Page 7 of 12
8 TYPE A 7. Steel structures - nondestructive testing. "Sprider Euro City" - Sofia (for Client Prototyp Ltd.) Extension of Liebherr Hausgerate Marica EOOD plant - Plovdiv VIP lounge - Airport Sofia Multipurpose sports hall Armeec - Sofia (for Client Glavbolgarstroy AS) Sport Hall Panagjurishte (for Client Glavbolgarstroy AS) IKEA Sofia MALL "Galeria" - Plovdiv. Sofia South Ring Mall Ltd. Restaurant Winter Garden Toscana (for Client Prototyp Ltd.) Sports Hall "Kamchia" (for Client Ircon Ltd.) Sofia Subway Extension - Ventilation Shaft VIII, Metrostation VII, Zone "C" (for Client TAISEI Corporation- Bulgarian BraNCH) Many Projects for Clients like JGC - Japan, Alstom Norwey, Projeco Italy, ENEL, HEM - Chemical Industry Construction and repair shop, Pleven; KZU ZLMK - Septemvri, VATECH HYDRO Austria, Risk Engineering Bulgaria; etc. Sochi Olympic Games City at Horizont Ivanov, Pleven; Waste Deposits Processing Shop at MPK Pleven AS; Yazaki Japan workshop in City of Dinitrovgrad at MPK Pleven AS; Lufthansa Technique Sofia Airport with Mix Construction Ltd; 8. Inspections Project Water turbines manufacturing client SRP USA, manufactured by GE Hydro-Norway at Vaptzarov - Hydro, Pleven, Bulgaria, for Moody International; Project Pressure vessels, client Technoservice Italy, for Moody International and JGC-Japan; Project Main frame casting and assembly of secondary and tertiary crushers, client FLUOR Chile, for Moody International ; BKM Project Bucket wheels complete for excavators client Assmang/DRA, for Moody International ; Project Qatargas3&4 Onshore Project - Storage tanks & main root beams, client Qatargas - Quatar, for Moody International ; Project Driers Regenerator Furnaces, client Yemen LNG Co Ltd, for Moody International ; Project ATYROU Refinery Reconstruction- Fired Heaters and Pressure vessels, client JGC Corporation-Japan, Project Heat exchangers for JGC Japan for Moody International ; Project Prefabrication of vertical steel cylindrical tanks, client STG Germany for Moody International ; Project Prefabrication of vertical steel cylindrical tanks, client Qatargas -Quatar for Moody International ; Project Casting and machining of crushers at Radomir Metal Industries Inc- Bulgaria, Akdas AS-Turkey, Pilsen Steel Czech Republic and METKAGROUP- Greece, client Metso Minerals USA; Project Heat exchangers, client Technip France, for Moody International ; Project Saipem Crew Boats, client Eni Saipem, for Moody International; Project MHU 1700 Frame Support&Bucket for Pile upending, client Eni Saipem, for Moody International; Project Iron Ore Expansion Project - MP 1000 secondary and tertiary crushers, client Rio Tinto, for Moody International ; Project FGD-Cottom Industrial fans manufacturing, client RWE-Losungen GmbH-Germany, for Moody International ; Project AGT Pipeline Project - Facilitiles Instillation/Pipeline, client Spie Capag SA&Petrofac International Ltd JV U.A.E., for Moody International ; Project Cast tube support, client FEI Furnace Engineering Inc-Japan Project Cowal Gold Alisse Crushers, client Aker Kvaerner Australia, for Moody International; Projects FAT and expediting Vibratory screens at Hraninvest AS for clients Jacobs, Enersul, C.C.C., for Intertek Project Survival- & Deck Equipment at Alpha Marine, client Global Davit, for Intertek In service and Out-of service Storage Tanks inspections for Petrol AD, Ecopetroleum, OMV, State Agency "STATE RESERVE AND WAR-TIME STOCKS", Burgas Airport, Sofia Airport and Varna Airport; Page 8 of 12
9 TYPE A FAT of transformers at Lemi Trafo and HUNDAY Electric for Intertek GAT Engineering and Management, Rehovot, Israel Inspection of three 5000m³ storage tanks for West Quarna Project, Barsa, Iraq clent FLUOR USA for Intertek Moody, Bulgaria 9. Conformity Assessment of the following transportable pressure equipment: Avtometan Ltd \sofia Raykov serviz Dimitrovgrad Neochim - Dimitrovgrad Coca-Cola HBC Bulgaria AD PEPSI Bulgaria Continvest Ltd Messer Bulgaria Linde Group SOL Group SIAD Bulgaria LUKOIL Burgas Refinery- for Energoremont Group Sofia Atlas Balkan AS Sofia Many Projects in Turkey Çorum, Konya, Bursa, Ankara and İstanbul 10. Technical Survey of Pressure equipment, Pressure vessels and lifting equipment at: Electrical transport - Sofia; Sofiyska voda AD Eurofrigo - Sofia; Electrodi - ESAB - Ihtiman Alpha lift - Sofia Kamenitza beer breweries owned by Interbrew Belgium in Plovdiv, Pleven and Haskovo; Clondike - Plovdiv; OMV - Bulgaria Pleven and Co beer brewery in Pleven; Chimremontstroy - Sofia; Totema Engenering Ltd.- Sofia; BIC Cime JSC - Sofia; Sopharma - Sofia; Donatex Sofia; Remoterm - Sofia; Raikov service Dimitrovgrad SIAD Bulgaria Sofia MESSER Sofia Sofia MED SA- Sofia Mondi - Stambolijski "State opera - Plovdiv" "Bucor" LTD "MOTO PFOHE" LTD "Euro Facility Management" LTD Nestle Bulgaria Sofia "Sensor Nite Industrial EOOD" "Sokolets Borovets" JSC "Hidrotest" LTD - Sofia "Ko-montaj" Aprilovo Page 9 of 12
10 TYPE A "Chimremontstroi Vratsa BG" LTD SOL Bulgaria Sofia TPK"Mebel" LTD "Euro Alliance Engineering"-JSC Metal Kompleks - Sofia Diana" LTD - Sofia, Pleven, Burgas, Plovdiv PRO PLC Kaloyanovo Municipality "Centillion" LTD "Belotex 95" JSC Zlatograd Atlas Balkan AS Sofia RENTAM Ltd Sofia TEMA AS Sofia Metacom AS Pleven MPK AS Pleven Nestle Bulgaria Varna Numerous State Authorities departments, schools, hotels and holiday facilities, small business premises, centers, for tires replacement and storage, test storage and production facilities of technical gases delivering companies. And many other more or less significant projects, including all the above mentioned services around Republic of Bulgaria and neighboring countries Page 10 of 12
11 TYPE A References Company Type of inspections carried out City Period of inspections 1. Nondestructive testing, assessment of testing Elprom - ZEM AS equipment condition, vibro-diagnostics Sofia Toploficatia Plovdiv North Pipelines, boilers, cylindrical steel tanks and steam AS turbines Plovdiv Tsvetan Najdenov Tsetso - V Transit steam pipelines from steam power plants Sofia 1996, Temos Ltd Transit steam pipelines from steam power plants Sofia Toploficatcia Pleven AS Tubes, boilers, pressure vessels, heat exchangers Pleven 1996, Chimengineering Ltd Gas pipelines Ihtiman Vyzhod Ltd Gas pipelines Trudovetc "Exploration and extraction of oil Gas pipelines and gas-pleven" AS Pleven Techtest AS Gas pipelines Sevlievo KZR Ltd Cylindrical steel tanks for the oil industry Vidin Boilers, pipelines, cylindrical steel tanks, heat Tselhart AS exchangers, etc. Stambolijski Boilers, Transmission steam pipelines from steam Toploficatsia - Sofia AS power plants, turbines, pressure vessels, heat exchangers, etc. Sofia Umran Celik Boru Oil pipelines, gas supply and water supply systems SANAYII AS Istambul, Akcakoca Pipelines, pressure vessels and tanks, and Kamenitza AS equipment survailance Plovdiv Cranes, pipelines, cylindrical steel tanks, boilers, Union Minier Pirdop AS pressure vessels and heavy-duty equipment Pirdop Pivovarna Pleven AS Tubes, pressure vessels and tanks Pleven 2000, Bulmont AS Pressure vessels, pipelines, cylindrical steel tanks Pleven, Pirdop Kome Ltd Transit steam pipelines from steam power plants Sofia Direct Ltd Transit steam pipelines from steam power plants Sofia Sevlievo gaz AS Gas pipelines Sevlievo, Gabrovo "Vaptsarov Plant" Ltd. Water turbines Pleven Kostadin Mechkov Gas pipelines for a gas filling stations Plovdiv Toplivo AS Gas cylinders for cars Sofia 2001, Lurgi Bishoff AS Pipelines Pirdop Metakom AS Castings Pleven Stainless steel vessels, steel cylindrical tanks and Ship Lloyd Registry Corp. gas cylinders Sofia 2000, Tyuf Reynland Bulgaria Sulphuric acid production line Pirdop 2001, TUBEMEUSE Industries S.A. Pipelines Belgium 2001, Sofia Electrotransport AS Survailance of lifting and other equipment Sofia Overgaz engineering Gas pipeline - Galata - Provadia Varna LUKOIL BULGARIA ЕООД Gas pipelines for a gas filling stations Bulgaria Petrol AS Tank farm inspections Sofia, Plovdiv RTD Netherlands Gas pipeline - Galata - Provadia (offshore); inspection of the transit gas pipeline Bulgaria - Greece Bulgaria Checking tanks for ammonia, oil and carbon S & Q MART dioxide Istambul Ministry of Defense-Agency Electrical measurements Hotels & Recreational "Recreation and Restoration facilities Electrical measurements Students Technical University Sofia dormitories Sofia Gas Electrical measurements Private Homes Page 11 of 12
12 TYPE A 38. Electrical measurements Administrative Ministry of Economy buildings Electrical measurements Laundry Detergent Macro B Industry Plant Sofia Airport Tank inspection Sofia Varna Airport Tank inspection Varna BRUNATA BULGARIA LTD Pipelines Pernik OMV Bulgaria Supervision Building Oil Terminal Sofia OMV Bulgaria Inspection of Oil Tanks at Tank Farm Vidin HEM AS - Pleven Pressure vessels, heat exchangers, high pressure heat exchangers, furnaces, pipelines, cylindrical steel tanks, absorbers, steel structures Pleven Expediting and Inspection Projects RIK Kazanlak, Varna, Moody international Kazanlak, Projeco Varna, Radomir Metals, Radomir Radomir - Best Technika Welded joints and steel pipes inspection Botevgrad Ihtiman, Bulgartransgaz Sandanski Nondestructive testing; Destructive testing, AES Maritza Iztok 1 chemical and metallographic analyzes Galabovo Nondestructive testing; Destructive testing, Aurubis Bulgaria AS chemical and metallographic analyzes Pirdop Nondestructive control of welded joints at gas Beton Bg Ltd pipelines Sandanski Eurofrigo Star Ltd Non-Destructive testing Sofia Nondestructive testing; Pressure vessels, autoclaves Ideal Standart Vidima AS and air receivers Sevlievo Nondestructive testing; Destructive testing, Mondi Stambolijski AS chemical and metallographic analyzes Stambolijski Sofia Med AS Nondestructive testing Sofia SOL Bulgaria AS High-risk equipment survailance Sofia Nondestructive testing; Destructive testing, Sviloza Yarn Ltd chemical and metallographic analyzes Sliven Nondestructive testing; Eddy current testing and Toploficatsia Sofia AS chemical analysis Sofia Nondestructive testing; Destructive testing; V-gaz Bulgaria Ltd Pressure vessels Sofia Alstom Bulgaria Ltd Non-destructive testing of boilers and tanks Galabovo Mitsubishi Heavy Industries, Ltd Nondestructive tests TPP AES Maritza East 1 Sofia Nondestructive testing of welded joints at gas Savel Ltd pipelines and boiler installations Petrich MPK Pleven Ltd Non-destructive testing of welded steel structures Pleven Nondestructive and destructive testing of aluminum Ilinden Ltd castings Pleven Non-destructive testing of welded joints in Lukoil Atom Bulgaria Ltd Bulgaria Refinery Sofia Non-destructive testing of welded joints at steel STRIMONA STROY structures and offshore marine equipment Petrich Page 12 of 12
IS SPECIALIZED IN COMPLEX DESIGN, REPAIR AND INSTALLATION OF POWER EQUIPMENT FOR HEATING INSTALLATIONS, METAL STRUCTURES AND VESSELS UNDER PRESSURE
IS SPECIALIZED IN COMPLEX DESIGN, REPAIR AND INSTALLATION OF POWER EQUIPMENT FOR HEATING INSTALLATIONS, METAL STRUCTURES AND VESSELS UNDER PRESSURE OUR CLIENTS - regular participation in planned repairs
More informationA NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND
A NEW VALVE BRAND WITH A LOT OF EXPERIENCE BEHIND C O M P A N Y P R O F I L E Established in 1968. With the support of the new valve team our aim are short lead times, exemplary quality and good customer
More informationCONSORTIUM KZU HOLDING GROUP YOUR RELIABLE PARTNER IN CONSULTING ENGINEERING MANUFACTURE AND ERECTION OF STEEL STRUCTURES SUPERVISION TRADING
CONSORTIUM KZU HOLDING GROUP YOUR RELIABLE PARTNER IN CONSULTING ENGINEERING MANUFACTURE AND ERECTION OF STEEL STRUCTURES SUPERVISION TRADING KZU HOLDING GROUP COMPANY PROFILE The company was found in
More informationList of forms CLAP with correspondence WGP /68/UE
List of forms CLAP with correspondence WGP - 204/68/UE CLAP number CLAP version Adopted by CLAP Subject WGP number Adopted by WGP X00 /03/205 Equipment covered by the regulations on transport of dangerous
More informationList of forms CLAP with correspondence WGP - 97/23/EC
List of forms CLAP with correspondence WGP - 9723EC CLAP number CLAP version Adopted by CLAP Subject WGP number Adopted by WGP 1 9 07092004 ESR on manufacturing - Welded tubes 725 07092004 2 4 26012006
More informationMEC-Q-E-2007 QC Manager PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
102031-MEC-Q-E-2007 QC Manager Holds a B. Sc. in Metallurgy & Material Science Engineering and has over 11 years hands-on experience working as Quality Control Engineer / Manager at several projects. PERSONAL
More informationDepartment of Chemical & Polymer Engineering University of Engineering & Technology Lahore (FSD Campus)
Department of Chemical & Polymer Engineering University of Engineering & Technology Lahore (FSD Campus) 1 Nondestructive testing (NDT) use test methods to examine an object, material or system without
More informationSUPPLIER QUALITY SCOPE AND FACILITY QUESTIONNAIRE. Bantrel Co. Project #:
Bantrel Co. Project #: COMPLETED BY: DATE: SUPPLIER NAME: D & B NUMBER: CONTENTS 1.0 GENERAL INFORMATION 2.0 PERSONNEL 3.0 QUALITY PROGRAM 4.0 SUPPLIER / CONTRACTOR INFORMATION 5.0 SCOPE OF FABRICATION
More informationwww.gete-ndtjordan.com OUR SERVICES With this association, we are able to provide testing and Inspection service in all kind of Non- Destructive Testing for Oil and Gas industries. Including exploration,
More informationC O M P A N Y P R E S E N T A T I O N
EL KONTROL EOOD Bulgaria 2018 C O M P A N Y P R E S E N T A T I O N Prof essional Solutions in the Energ y Sector EL KONTROL EOOD is a private partnership founded in 1999 in Stara Zagora, Bulgaria. Company
More informationONE GROUP - MANY POSSIBILITIES
MTG incorporates leading Bulgarian foundries, specialized in casting and machining of parts of aluminium, cast iron and steel. The major technologies adopted and utilized by the plants include: centrifugal
More informationCommon Operating Problems
SYDNEY Pressure Vessels Field Manual Common Operating Problems and Practical Solutions Maurice Stewart Oran T. Lewis AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO SAN FRANCISCO SINGAPORE
More informationLicenses and Control in Heat Power Engineering Division
Licenses and Control in Heat Power Engineering Division MIHAIL DIMITROV Head of the Permits, Licenses and Control in Heat Power Engineering Department Carries out studies and inspections, prepares documents
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationDirective 97/23/EC Pressure Equipment
Directive 97/23/EC Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
More informationInnovative Technologien zur Erzeugung und Verwertung von Biogas
Großmann Ingenieur Consult GmbH Innovative Technologien zur Erzeugung und Verwertung von Biogas Offshore Technologies and Steelworks Stainless Steel and Aluminium Surface Finishing Design and Engineering
More informationContents EN 14015:2004 (E) page
Contents page Foreword... 11 1 Scope... 12 2 Normative references... 13 3 Terms, definitions, symbols and abbreviations... 15 3.1 Terms and definitions... 15 3.2 Symbols... 19 3.3 Abbreviations... 21 4
More informationTUV / IICS 3.1 CERTIFIED WELDING INSPECTOR & API 577 WELDING INSPECTION & METALLURGY
LAST UPDATED 06-04-2018 TUV / IICS 3.1 CERTIFIED WELDING INSPECTOR & API 577 WELDING INSPECTION & METALLURGY COURSE DURATION: 7 DAYS ARE YOUR INSPECTORS / ENGINEERS PREPARED TO DEAL WITH THE RISING DEMAND
More informationCompany Introduction. equipment for nuclear power industry
Company Introduction Established in 2007 part of Atomenergomash JSC, the mechanical engineering division of ROSATOM state corporation, AEMtechnology Joint-Stock Company is at present a leader in the field
More informationPublic Procurement Monitoring July 2017
Public Procurement Monitoring July 2017 Public Procurement Monitoring Conditions affecting negatively the competition in public procurement, Construction Sector Public Procurement Trends Construction sector
More informationBRUNO PRESEZZI AN ITALIAN BASED PRIVATE OWNED COMPANY.
COMPANY PROFILE 1. Company BRUNO PRESEZZI AN ITALIAN BASED PRIVATE OWNED COMPANY. Bruno Presezzi is an engineering, mechanical processing and construction company at the forefront of manufacturing of fabricated
More informationSOLUTIONS ASSEMBLY PRODUCTION IN PIPE FORMING & WELDING COMPONENTS MADE OF HIGH-QUALITY MATERIALS
SOLUTIONS IN PIPE FORMING & WELDING ASSEMBLY PRODUCTION COMPONENTS MADE OF HIGH-QUALITY MATERIALS Piping Distribution systems Spirals Fitting kits Fluid lines Connections Fig. 1 Company premises, Nistertal
More informationManufacture of Material Handling Equipment
Manufacture of Material Handling Equipment TTS (Transportation Technology Systems) has more than 25 years of experience in manufacturing of industrial equipment, bridges and other large steel structures
More informationYour Guarantee of Safety and Reliability.
Contacts with a wealth of experience General Managers DEKRA Industrial: Jörgen Backersgård, Matti Andersson and Werner Bollmann. Your Guarantee of Safety and Reliability. How we put you on the safe side
More informationEXPRESSION OF INTEREST (EOI) FOR. Mechanical Works
EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &
More informationTurning Metals Into Engineered Solutions: Expansion Joints
Turning Metals Into Engineered Solutions: Expansion Joints Experience & Innovation It started in 1960 when Manuel Concheiro and his sons Mario and Carlos Concheiro founded a small company dealing with
More information1, Platforma Inustriala Street Râmnicu Vâlcea - Romania Tél.: (40) Fax : (40)
1, Platforma Inustriala Street 240050 Râmnicu Vâlcea - Romania Tél.: (40) 2 50 73 93 40 - Fax : (40) 2 50 73 38 89 e-mail : sales@vilmar.ro - http://www.genoyer.com Groupe Genoyer s key figures 2 000
More informationJiangyin Donghao Stainless Steel Pipe Co., Ltd
Jiangyin Donghao Stainless Steel Pipe Co., Ltd March 12 th, 2018 Edition ISO 9001-2008, PED97/23/EC and ASME Boiler and Pressure Vessel Code Certificate certified. Built in 2005, Cover area over 30,000
More informationENSA ENWESA SERVICES INDEX
ENSA ENWESA SERVICES INDEX 1. ENGINEERING, DESIGN AND TECHNOLOGY SERVICES (Ensa / ENWESA) Ensa has extensive experience designing nuclear components and pressure vessels since 1973 according to international
More informationBENEFIT. from our products and services.
BENEFIT from our products and services www.eco-prozesstechnik.com 2 ECO Prozesstechnik ECO Prozesstechnik 3 Our products and solutions We design and install complete heat transfer plants for land and marine
More informationMachine list + core competences Your contract manufacturer for mechanical engineering
Machine list + core competences Your contract manufacturer for mechanical engineering Welding Machining Coating Assembling Project management 1 We realise it - as we have for five generations! With our
More informationGridin's Group certificates NON-DESTRUCTIVE TESTING
Gridin's Group certificates ABOUT US Gridin s Group, has been successfully providing non-destructive testing services in various industrial sectors since 2004. The main activity of the company is non-destructive
More informationServices. Engineering Inspection and Laboratories SERVICES - 1 -
Engineering Inspection and Laboratories SERVICES - 1 - Our objective is to verify that the product furnished by the supplier is in full compliance with our client's purchase order's specifications and
More informationWELDING ENGINEERING FABRICATION
WELDING ENGINEERING FABRICATION Safety Our safety department is structured for optimal safety performance, communication and coverage. Safety is our top priority Our management team has over 280 years
More informationExceptional Turnaround From A Proven Partner in Materials Testing
www.pes-testing.com MECHANICAL TESTING METALLURGICAL ANALYSIS CHEMICAL ANALYSIS NON-DESTRUCTIVE TESTING FAILURE ANALYSIS CONSULTING Exceptional Turnaround From A Proven Partner in Materials Testing About
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
More informationTOHAMA Co. Profile البصرة-حي المهندسين-مجاور شركة المرابع الخضراء
TOHAMA Co. Profile 2017 E-Mail:tohamainspection@gmail.com البصرة-حي المهندسين-مجاور شركة المرابع الخضراء Co. Name : TOHAMA For Engineering Inspection Co. Head office : Basrah Iraq E-mail : tohamainspection@gmail.com
More information71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
More informationMEC-QW-E-2005 QA/QC Manager PERSONAL DATA EDUCATION LANGUAGES COMPUTER SKILLS TRAINING COURSES AND CERTIFICATIONS
104727-MEC-QW-E-2005 QA/QC Manager Holds a B. Sc. in Metallurgical & Materials Science Engineering and is well-qualified in QA/QC Welding engineering with more than 11 years of experience in fabrication
More informationMINISTRY OF ECONOMY, ENERGY AND TOURISM
MINISTRY OF ECONOMY, ENERGY AND TOURISM BULLETIN ON THE STATE AND DEVELOPMENT ON THE ENERGY SECTOR IN THE REPUBLIC OF BULGARIA 2013 Page 1 THE PRESENT DOCUMENT IS PREPARED PURSUANT TO ARTICLE 4, PARAGRAPH
More informationYour single source for design engineering, specialized fabrication and related services
Your single source for design engineering, specialized fabrication and related services We build true partnerships Vestek is a next-generation company forged by leading fabricators. Together, we are your
More informationPresentation of Licenses and Control in Gas Supply Division
Presentation of Licenses and Control in Gas Supply Division Kostadin Balachev Director Sofia, 23-27 September 2002 Contents: 1. Functions and tasks 2. Structure and composition 4. Development, aims and
More information'W inôusrrialprôfiles & SHEETS
dualtech 'W inôusrrialprôfiles & SHEETS PRODUCT CATALOGUE -CONSTRUCTION -SHIP BUILDING -RAIL TRANSiT -AUTOMOTIVE -AVIATION -POWER & ELECTRONICS Aluminum and aluminum alloy provide some good properties
More informationThinking big. Acting bold.
Thinking big. Acting bold. About us Established in 1990, Sanghvi Forging is among the country s fastest growing forging players. Our products Tool Steel Forged Flanges Heavy Forgings Machined Forgings
More informationManufacture of industrial machines, bridges and large metal structures
Manufacture of industrial machines, bridges and large metal structures TTS (TRANSPORTATION TECHNOLOGY SYSTEMS) HAS MORE THAN 25 YEARS OF EXPERIENCE IN MANUFACTURING OF INDUSTRIAL EQUIPMENT, BRIDGES AND
More informationBelow the Surface: The Importance of Mechanical Integrity at Your Plant. ERI Solutions Inc. All Rights Reserved.
Below the Surface: The Importance of Mechanical Integrity at Your Plant Introduction ERI Solutions Inc. (ERI) founded in 2003 to develop insurance markets and standards for the growing ethanol industry.
More informationYOUR ENERGY SOURCE CORPORATE PRESENTATION FILE
YOUR ENERGY SOURCE CORPORATE PRESENTATION FILE CONTENTS 1. Mission 2. Vision 3. Targets 4. About Our Company 5. Quality Policy 6. Training 7. Organization Chart 8. Field of Activities of the Firm 9. Projects
More informationExceptional Turnaround From A Proven Partner in Materials Testing
www.pes-testing.com MECHANICAL TESTING METALLURGICAL ANALYSIS CHEMICAL ANALYSIS NON-DESTRUCTIVE TESTING FAILURE ANALYSIS CONSULTING Exceptional Turnaround From A Proven Partner in Materials Testing About
More informationCASTINGS FOR EXTREME WEAR.
CASTINGS FOR EXTREME WEAR www.cmw.pt CMW FOUNDRIES QUALITY AND KNOW-HOW TO DELIVER COMPLETE SOLUTIONS CMW Foundries is a Portuguese foundry group founded in 1981. We are specialists in wear resistant technical
More informationAbout Us. Apart from BHEL, our list of clients includes reputed names in their respective fields.
About Us We would like to introduce ourselves as one of the leading engineering industry having over 35 years experience in the field of steel fabrication. We have expertise in manufacturing components
More informationList of forms CLAP/WGP by keyword - 97/23/EC
List of forms CLAP/WGP by keyword - 97/23/EC Keywords CLAP Adopted by WGP Adopted by number CLAP number WGP Subject accumulator 11 24/03/2000 1/19 24/03/2000 Scope - Hydraulic and pneumatic transmissions
More informationYOUR SINGLE-SOURCE INDUSTRIAL SERVICE PROVIDER
BUSINESS OVERVIEW 2 AND BUSINESS PHILOSOPHY Southey is a leader in providing fabric maintenance, insulation, repair and maintenance services to clients throughout Africa and the Middle East. These services
More informationINTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION
INTEGRATED NDT / INSPECTION, CONTRÔLE & CERTIFICATION Presentation I NDT Congo is an inspection company specialized in Non Destructive Testing of industrial equipment such as boilers, heat exchangers,
More informationPractice on NDE Licensing and Inspection Qualifications for Nuclear Power Plant In-service Inspections
18 th World Conference on Nondestructive Testing, 16-20 April 2012, Duban, South Africa Practice on NDE Licensing and Inspection Qualifications for Nuclear Power Plant In-service Inspections Jinhong LIU,
More informationInnovative Solutions Solving the Problems of Industrial Inspection, Maintenance and Repair
Innovative Solutions Solving the Problems of Industrial Inspection, Maintenance and Repair 4127 Hollister St., Suite A Houston Ph: (713) 460-4001 Fax: (713) 996-7752 www.mhtgroup.net Texas 77080 MHT Company
More informationNondestructive material testing services
NDT SERVICES Nondestructive material testing services Conventional nondestructive inspections and automated ultrasonic single- and serial inspection At your site or in our NDT Service Centre in Burgwedel
More informationNondestructive material testing services
NDT SERVICES Nondestructive material testing services Conventional nondestructive inspections and automated ultrasonic single- and serial inspection At your site or in our NDT Service Centre in Burgwedel
More informationPROCESS GAS WASTE HEAT BOILERS WITH THIN FLEXIBLE TUBESHEET DESIGN
PROCESS GAS WASTE HEAT BOILERS WITH THIN FLEXIBLE TUBESHEET DESIGN BORSIG The Company BORSIG Process Heat Exchanger GmbH, a member of the BORSIG Group, is the international leading manufacturer of pressure
More informationMaterials and Qualification Procedures for Ships
Materials and Qualification Procedures for Ships Approval of Works for the Manufacture of Fusion Welded Pressure Vessels Revision 4, July 2015 Page 1 of 17 Lloyd s Register Group Limited, its subsidiaries
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19890-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.11.2016 to 14.04.2020 Holder of certificate: Aktien-Gesellschaft
More informationContents. About Us 2. Engineering Services 3. Design 4. Welding Inspection and Engineering Services 5. Rope Access NDT 6
Contents About Us 2 Engineering Services 3 Design 4 Welding Inspection and Engineering Services 5 Rope Access NDT 6 Audit, QA&QC Expediting Services 7 Supplier Audits 8 Owner Representation 9 PED&TPED
More informationTotal Quality Management. Quick and Accurate Response to Inquiries. As-Promised Deliveries. Fair and Competitive Prices
FORGED SHAPES 1 2 MISSION STATEMENT The Anderson Shumaker team is dedicated to earning your loyalty and gaining your trust through: Total Quality Management Quick and Accurate Response to Inquiries As-Promised
More informationHINDON FORGE PVT. LTD.
www.hindonforge.net Hammering Quality into Forgings An ISO 9001:2000 Certified Co. HINDON FORGE PVT. LTD. Manufacturers of Critical Steel Forgings and Flanges MANUFACTURERS & EXPORTERS OF ALL KINDS OF
More informationCapability Statement
Capability Statement Contents 1. About Us 2. Company Overview 3. Company Information 4. Personnel 5. Facilities 6. Pressure Piping & Vessels 7. Structural Steel 8. Labour Hire 9. Quality Assurance 10.
More informationNDE SOLUTIONS INTERCONTRÔLE NONDESTRUCTIVE EXAMINATION
INTERCONTRÔLE NONDESTRUCTIVE EXAMINATION Specialists in nondestructive examination has specialized in automated nondestructive testing of nuclear reactor primary components and more specifically on steam
More informationTo eliminate. Our services. Insulation Hot & Cold. Acoustic Insulation. Asbestos Solutions. Access & Scaffolding. Rope Access the energy waste
KAEFER at a glance KAEFER AT A GLANCE 03 Our services To eliminate Insulation Hot & Cold Acoustic Insulation Asbestos Solutions Access & Scaffolding Rope Access the energy waste Scaffold Design Surface
More information'W inôusrrialprôfiles & SHEETS
dualtech 'W inôusrrialprôfiles & SHEETS PRODUCT CATALOGUE -CONSTRUCTION -SHIP BUILDING -RAIL TRANSiT -AUTOMOTIVE -AVIATION -POWER & ELECTRONICS Aluminum and aluminum alloy provide some good properties
More informationTowards the Optimum Alloy Selection for Column Pipe and Riser Main Assemblies: Pushing the case for Aluminium Bronze
Towards the Optimum Alloy Selection for Column Pipe and Riser Main Assemblies: Pushing the case for Aluminium Bronze Mark Dougan Director of Metallurgy, Spunalloys Ltd, UK November 2011 Spunalloys is one
More informationKey activities and performance highlights. History
NON DESTRUCTIVE TESTING HEAT TREATMENTS INSPECTION OF INDUSTRIAL PLANTS COMPANY OUTLINE History Italsabi is a company specialized in Non Destructive Testing and Heat Treatments for structural integrity
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction bending, ENGIE Fabricom
More informationIndustrial Electrical Water Heaters Manufactured In Accordance With International Codes And Standards ( AMSE, EN, AD2000, CODAP, PD, API etc. ).
INDUSTRIAL INDUSTRIAL SERIES Industrial Electrical Water Heaters Manufactured In Accordance With International Codes And Standards ( AMSE, EN, AD2000, CODAP, PD, API etc. ). Ideal for all types of large
More informationTianjin Nolite Steel Co. Ltd.
based in Tianjin Daqiuzhuang Industrial area mainly manufactures SSAW (Spiral Submerged Arc Welded) Steel Pipes, ERW (Electric Resistance Welded) Steel Pipes, and Galvanized Steel Pipes with 600,000 tons
More informationCompany Profile. Metallurgical Consultancy and Services Sdn. Bhd. Contact Person : Dr. Lim Ching Liang, Director
Company Profile Metallurgical Consultancy and Services Sdn. Bhd. MS ISO/IEC 17025 TESTING SAMM No. 442 Contact Person : Dr. Lim Ching Liang, Director Contact Details: 20, Seksyen U5/17 (PS), Seksyen U5
More informationRATES OF DEPRECIATION AS PER COMPANIES ACT, 2013
(I) Buildings [NESD] (a) Building (other than factory buildings) RCC Frame Structure 60 1.58% 4.87% (b) Building (other than factory buildings) other than RCC Frame Structure 30 3.17% 9.50% (c) Factory
More informationTankhouse Cranes: A partnership in technology
Tankhouse Cranes: A partnership in technology Around the globe Kuenz tankhouse cranes ensure efficient and reliable operation. Aurubis Bulgaria AD Copper Refinery, Pirdop - Bulgaria Aurubis Bulgaria AD
More informationPRESSURE VESSELS (INDIA)
Pressure Vessels Heat Exchanger Tube Bundle Storage Vessels Spherical Vessel PRESSURE VESSELS (INDIA) ISO, HP-0 & ASME Accredited Company We are Leading manufacturer & exporter of Pressure Vessels, Shell
More informationCSI HISTORY AND CAPABILITIES
PHONE: 704-644-5000 FAX: 704-588-3039 WEB: www.csiheat.com CSI HISTORY AND CAPABILITIES CONTENTS: History Key Personnel Facilities and Equipment Engineering and Technical Services Support Design and Contract
More informationGOODWIN. Nozzle Check Valves
GOODWIN Nozzle Check Valves N-ZK N-ZSK N-B N-BK - The International Company International, the established market leader in the design, manufacture and supply of Dual Plate Check Valves for use in the
More informationICS PAKISTAN (PVT) LTD
ICS PAKISTAN (PVT) LTD An ISO 9001:2008 Certified Company NON-DESTRUCTIVE TESTING THIRD PARTY INSPECTION (TPI) HEAVY LIFTING EQUIPMENT INSPECTION STORAGE TANK CALIBRATION PWHT SERVICES INSTRUMENT CALIBRATION
More informationPOWER GENERATION & ENERGY
EXPANSION JOINTS for POWER GENERATION & ENERGY 06.2016 2 PRESSURE BALANCED EXPANSION JOINTS FOR GEOTHERMAL ENERGY Ayvaz uses its extensive experience in producing expansion joints for Geothermal power
More informationPioneering Wear Protection VAUTID LATAM
Pioneering Wear Protection VAUTID LATAM 1 VAUTID Pioneering Wear Protection Range of products Protecting Metal surfaces against wear caused by minerals VAUTID offers system solutions from one source, from
More informationIndependant divisions in Belgium, the Netherlands, Bulgaria & Romania
CORDEEL GROUP 100% family owned More than80 yearsof experience Independant divisions in Belgium, the Netherlands, Bulgaria & Romania More than a thousand employees Turnover 450 millioneuro / year Various
More informationPROJECT STATISTICS ON FAMILY BUSINESSES IN BULGARIA MAIN RESULTS, 2015
Introduction PROJECT STATISTICS ON FAMILY BUSINESSES IN BULGARIA MAIN RESULTS, 2015 Small and medium-sized enterprises (SMEs) play a crucial role in reaching the objectives of the Europe 2020 Strategy.
More informationASME Stamp Pressure Vessels And Heat Exchangers for Oil & Gas, Refinery And Petrochemical Industry
U AUTHORIZED ASME Stamp Pressure Vessels And Heat Exchangers for Oil & Gas, Refinery And Petrochemical Industry www.crystalindustrial.in SHELL & TUBE HEAT EXCHANGER OVERVIEW For crystal, Shell and Tube
More informationWHENEVER WITH ALL YOUR DEMANDS
CASTINGS FORGINGS ASSEMBLY UNITS www.benetrade.cz C O N TA C T U S WHENEVER WITH ALL YOUR DEMANDS Content Company Introduction Materials and Technological Capacities Examples of Products: Rails Castings
More informationFORGING A NEW WORLD. L&T Special Steels and Heavy Forgings. A brand of Larsen & Toubro Limited
FORGING A NEW WORLD A brand of Larsen & Toubro Limited CBMC/IRDP/06/2016 L&T Special Steels and Heavy Forgings Private Limited Hazira Manufacturing Complex P. O. Bhatha, Surat, Gujarat - 394 510, INDIA
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More informationENGINEERING SERVICES FOR THE OIL & GAS INDUSTRY
ENGINEERING SERVICES FOR THE OIL & GAS INDUSTRY BACKGROUND General Overview: Omega-wgo is a Germany based international plant and pipeline engineering company with decades of experience in the oil & gas
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationpartner-manufacturer in Central Asia
Your reliable partner-manufacturer in Central Asia COMPANY ESTABLISHMENT Machinery building plant Byelkamit LLP is the Kazakhstani commodity manufacturer. Established in 1995 within the framework of inter
More informationLaboratory Accreditation Programmes
Laboratory Address PO Box 15120, Aranui, Christchurch, 8643 19 Helanca Avenue, Wainoni, Christchurch, 8061 Telephone 03 381-1670 Fax 03 381-1690 URL Authorised Representative Client No. 1644 Programme
More informationBUSINESS PLAN CEN/TC 190 FOUNDRY TECHNOLOGY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 190 FOUNDRY TECHNOLOGY EXECUTIVE SUMMARY Business Environment The main activity of CEN/TC 190 "Foundry Technology" is the standardization in the field of cast metallic material.
More informationLIST OF ABBREVIATIONS
BULLETIN ON THE STATE AND DEVELOPMENT OF THE ENERGY SECTOR IN THE REPUBLIC OF BULGARIA 2015 1 THE PRESENT DOCUMENT IS PREPARED PURSUANT TO ARTICLE 4, PARAGRAPH 2, ITEM 17 OF THE ENERGY ACT WHICH REQUIRES
More informationRycroft Process Solutions 1 PROCESS SOLUTIONS
Rycroft Process Solutions 1 PROCESS SOLUTIONS RYCROFT HAVE BEEN MANUFACTURERS OF PROCESS EQUIPMENT FOR OVER 25 YEARS. ORIGINALLY SUPPLYING PROCESS PACKAGES TO THE OFFSHORE AND MARINE SECTORS. RYCROFT STEADILY
More informationTechnical Specification for Fabrication, Testing & Supply of Back plate assembly mock-up
INSTITUTE FOR PLASMA RESEARCH (An Autonomous Institute of Department of Atomic Energy, Government of India) Near Indira Bridge; Bhat; Gandhinagar-382428; India PART-I (B) Technical Specification for Fabrication,
More informationCompetence in Metal Expansion Joints
Competence in Metal Expansion Joints Metal expansion joints and their applications Pipework and ducting systems in industrial environments can be damaged, stressed and fatigued to the point of catastrophic
More informationEAM :2003/05 Revision 01 21/10/2016
European Approval for Materials Data Sheet EAM-0879-04 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described
More informationnalcofabtech.com A Nalco Champion Company
nalcofabtech.com A Nalco Champion Company 2 CONTENTS Goal Zero - Safety Culture...4 About Us...6 Capabilities...8 Services...24 Equipment and Facilities... 36 3 4 At Nalco FabTech, our programs ensure
More informationOverview of Non-Destructive Testing and Inspection Course Syllabus
Overview of Non-Destructive Testing and Inspection Course Syllabus This course reviews the general principles of seven non-destructive testing methods and their derivative techniques The following class
More informationACCREDITED AND RECOGNIZED AUDIT & CERTIFICATION SERVICES BY TÜV AUSTRIA TÜV AUSTRIA HELLAS
ACCREDITED AND RECOGNIZED AUDIT & CERTIFICATION SERVICES BY TÜV AUSTRIA TÜV AUSTRIA HELLAS ACCREDITATIONS & RECOGNITIONS QUALITY ISO 9001 Quality Management Systems ΕLΟΤ 1429 (TYPE Α, B and C) - National
More information