AQUA INTERNATIONAL LIMITED
|
|
- Doreen Hopkins
- 6 years ago
- Views:
Transcription
1 INSPECTION REPORT Report No.: Date: /9/0/APR/5 Customer : INNOVATIVE TECHNOLOGY P.O.No. : QVC PO#832063, IT PO#LT-Q-BR78.R2 (PI/IT5023 REV.4) Supplier: LEETAC Brand : IT Model No.: ITVS-200B Serial No.: D D (MAHOGAN) D D (GRAY) Model Description: 6 IN WOODEN MUSIC CENTER WITH BLUETOOTH Lot No.: 300 Lot Size: =3400 PCS Sample Size: 200 PCS Carton Nos: OF 2400/-000 OF 000 Acceptance Quality Plan ISO-2859 Level-II Major :.5 Minor : 4.0 A) GENERAL WORKMANSHIP Sampling Plan ISO-2859 LEVEL-II ACC : Major : 7 Minor : 4 Sample Size : 200 PCS REJ : Major : 8 Minor : 5 AQL : CRITICAL=0 / NOT ALLOWED SERIAL NO. DEFECTIVE Min. Maj. Cri MISSING SEGMENT ON DISPLAY 777 POOR PAINTING ON SPEAKER WINDOW 2246 PHONO TURNTABLE RUN RUBBING NOISE 0223 PHONO PLAYBACK LEFT CHANNEL NOISE 274,0689 CD MECHANISM WITH NOISE (W/O INTO CD DISC) BLUETOOTH PLAYBACK NOISE 0027,0350,2246,320, ,866,285 POOR PAINTING ON SPEAKER WINDOW ,2888, , POOR ELECTROPLATE ON FRONT PANEL FRONT PANEL INSTALL SLANT SCRATCH ON FRONT PANEL 3 2 TOTAL: WORKMANSHIP RESULT : WITHIN AQL BEYOND AQL Page of 9
2 B) HI-POT TEST ( FOR AC PRODUCTS ONLY ) Sampling Plan ISO-2859 Level-II AQL : CRITICAL=0 / NOT ALLOWED Sample Size : 200 PCS DEFECTIVE CRITICAL AC 250V ma FOR Min. 0 HI-POT TEST RESULT : WITHIN AQL BEYOND AQL C) PERFORMANCE TEST Power on check for 4 Hours Radio Maximum Sensitivity Measurement Broadcasting Station Interior Workmanship Check 3M-600 Tape Test For Silkscreen Printing D) PACKING : (L) 52 Carton Size (CM) (W) 40.5 (H) 32 Carton Barcode : (MAHOGANY) (CRAPHITE GRAY) SAMPLE SIZE RESULT 5 PCS OK 5 PCS OK 5 PCS OK PC OK 5 PCS OK (L) Gift Box Size (CM) : (W) (H) Gift Box Barcode : Spare Unit : Spare Parts: E) SHIPPING MARKS : Front Mark Side Mark Page 2 of 9
3 F) FINAL RESULT : WITHIN AQL BEYOND AQL PENDING This is an Inspection Report and not valid for any L/C Negotiation. The issue of this Inspection Report has no effect on the rights of the buyer to claim any deviations in the goods released for shipment when compared with the conditions contained in the order. This particularly applies to the quantity, quality, marking and packing of the released goods compared with the order details. Refer To Remark No. : FACTORY SIGNATURE YUKI ( C ) INSPECTOR SIGNATURE [Electronic file's) not shown the signature] G) REMARK ) PACKING ACCESSORIES: ENGLISH IM.,& 45 RMP ADAPTOR. 2) UNIT PLAYBACK TEST OF 8CM CD,PHILIPS 444A, CD-R/RW & 33.3 RPM & 45 RPM PHONE RECORDS ARE ACCEPTABLE. 3) WOOD MOISTURE MEASUREMENT ARE 7.% TO.8%, (MFRS SPEC: LESS THAN 2%). 4) THE MANUFACTURER STICK THE CARB LABEL (ID CODE:0097) ON UNIT & MASTER CARTON. 5) BLUETOOTH DISTANCE 0M TEST OF IPDAD 4 ON S-(8PCS) WAS ACCEPTED. 6) THE TIMING OF THE TONE ARM AUTO STOP IN THE PLAYBACK END ARE WITHIN 3 SEC FOR 33.3 RPM 20SEC FOR 45RPM& 78 RPM. 7) IM. VERSION: 200B40700E. 8) THE UNIT STANDBY POWER IS:.38W. 9) FCC ID: ZXNLEETACE6B0. 0) THE I/M SHOWN "6 IN NOSTALGIC ENTERTAINMENT CENTER "DIFFERENT FROM P/I SHOWN "RETRO 4 IN WOODEN MUSIC CENTER". ) ADD POLYFORM ON CD DOOR POSITION IN CARTON PACKING. 2) THE QVC SKU LABEL (E FOR CRAPHITE GRAY & E FOR MAHOGANY) STICK ON TOP OF MASTER CARTON 3) THE BMC MARKING ON BOTTOM OF CARTON. 4) WITH TRANSPARENT TAPE STICK ON THE QVC SKU LABEL. 5) EXTRA CLEAR TAPE WAS COVERED THE QVC SKU LABEL ON MASTER CARTON. BUT IT CAN SCANNABLE. Page 3 of 9
4 DROP TEST REPORT Report No.: Date: 08/Apr/5 Checked by: YUKI Manufacturer: LEETAC Model No.: ITVS-200B P.O.No.: QVC PO#832063, IT PO#LT-Q-BR78.R2 (PI/IT5023 REV.4) Location: QA TESTING ROOM Lot No.: 300 A) TYPE OF SAMPLE B) TYPE OF PACKING C) SAMPLE QUANTITY Brand New Model Polybag Master Ctn : CTN Repeat Order Clamshell/ Blister Packed Pieces Per Ctn : PC Materials Change Ply corrugated carton Gross Weight : 8.47 KGS Regular Testing Polyfoam Packed Carton Size : 52X40.5X32 CM Shrink wrap/ Cellophane Individual GB : PC D) MASTER CARTON E) INDIVIDUAL GIFT-BOX F) DROP TEST REQUIREMENT 76 cm 76 cm '0 drops: Corner, 3 Edges, 6 Faces 6 cm 6 cm Less than 0KGS (W) : 76CM (H) 46 cm 46 cm 0 to less than 9KGS (W) : 6CM (H) Other: Other: 9 to less than 28KGS (W) : 46CM (H) PASS PASS 28 to less than 45KGS (W) : 3CM (H) FAIL FAIL 45 to less than 68KGS (W) : 20CM (H) G) CONTENT OF CHECK ITEMS Cabinet Broken / Crack Parts Loose/ Poor Fixing Switches Damaged / Jammed Dial Pointer Off Position Malfunction Power TRF Vibration/ Noise Antenna Bar Damaged Wiring Worn Off Posts Broken / Crack PCB Broken / Crack Solder Joint Torn Off (ESP Big Component) Foreign Parts Packaging Damage DESCRIPTIONS Note: Based on ISTA A 200 STD. Page 4 of 9
5 I) PHOTOS Report No : Date : 8/9/0/APR/5 LABEL ON MASTER CARTON/REMARK(2) CARTON/REMARK(4) MARKING ON CARTON/REMARK(3) LABEL ON CARTON/REMARK(2/4) LABEL ON CARTON/REMARK(2) BARCODE ON CARTON BARCODE ON CARTON SCANNING TEST CARTON INNER PACKING CARTON INNER PACKING/REMARK() UNIT/ACCESSORIES PACKING ACCESSORIES/REMARK() MANUAL PRINTING POLYBAG/ DESICCANT UNIT VIEW UNIT VIEW UNIT VIEW UNIT VIEW UNIT VIEW UNIT VIEW Page 5 of 9
6 UNIT VIEW UNIT DETAILS UNIT DETAILS UNIT DETAILS UNIT DETAILS UNIT DETAILS UNIT DETAILS/REMARK(4) UNIT DETAILS UNIT DETAILS UNIT DETAILS PROTECT CD SHEET UNIT DETAILS UNIT DETAILS/REMARK(9) UNIT DETAILS POWER PLUG POWER CORD Page 6 of 9
7 IN TESTING REMARK(3) REMARK(7) REMARK(8) MISSING SEGMENT ON DISPLAY POOR PAINTING ON SPEAKER WINDOW POOR PAINTING ON SPEAKER WINDOW Page 7 of 9
8 POOR ELECTROPLATE ON FRONT PANEL FRONT PANEL INSTALL SLANT SCRATCH ON FRONT PANEL REMARK (5) Page 8 of 9
9 INSPECTION SERIAL NO. AS BELOW: Page 9 of 9
INSPECTION REPORT. Beyond AQL FAILED I. GENERAL INFORMATION II. INSPECTION SUMMARY III. REMARKS. Client: XXX Conclusion Report Date: 3 July 2012
Form No.: VTR-QR-CZ-RF-015 V1.1 Page 1 of 19 I. GENERAL INFORMATION Service Performed: Client: Supplier: Factory: Product Name: During Production Inspection XXX XXX XXX P.O. No.: 2472 Item No.: 324363
More informationIn-Process Inspection
Report No. : xxxxxxxxxxxxxxxx Re - Inspection Product : Knitten Gloves P/O No. : / Part.-No. : / Client : xxxxxxxxxxxxxxxx Order-Qty : 15,000 pairs Supplier : xxxxxxxxxxxxxxxx Participants Supplier : Mr.
More informationInspection Report(CLC)
Inspection Report(CLC) PRODUCT DESCRIPTION O-cn-0915056 (Re-Inspection after O-cn-0914894 performed on 01-14-2012) Product Name: Steel Metal Desk Inspection location: TianJin, China Inspection date: 12-31-2011
More information: STYLE : FAMX FMR SHAWL COLLAR COAT. COLOUR : Natural SIZE : XS, S, M, L, XL, 2X & 3X
INSPECTION REPORT FOR QVC UK (GMT) TO : QVC The Shopping Channel REPORT # : SHIJ124017 ATTN : QVC THE SHOPPING CHANNEL - LONDON - CLAIRE SADLER/JAY JOB # : -- C.C. : TIGER J SHANGHAI REP OFFICE - GANJIE/NICKY
More informationPre-Shipment Inspection Report
NO.: G001 Date:12 th Nov 2010 Inspector: Robin Page 1 of 8 EXECUTIVE SUMMARY AND INSPECTION STANDARD To: Attn.: Product Description: Vendor/Supplier: Factory Name: Factory Contact: Able doer corporation
More informationFABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: Fabric, 30 X X 68, 118 width
Date: Report Number: Page 1 of 5 FABRIC INSPECTION REPORT Buyer: PO # Agent: L/C # Supplier: Manufacturer: Product Description: Fabric, 30 X 30 76 X 68, 118 width Style/Code: 30 X 30 76 X 68, 118 Order
More informationSOP: Onsite I.T. Asset Collection Non-Leased Assets
SOP: Onsite I.T. Asset Collection Non-Leased Assets CREW CERTIFICATION: Only crews with at least one Certified I.T. Asset Handler may be dispatched to perform I.T. asset pickups. CREW SIZE: The number
More informationTENT / SHELTER / TARPS, GLOBAL DEFECT LIST
Date Rev. N Modifications tracking 2009/09/08 1 Initial release 2016/07/14 2 Major changes 9/19/2016 3 Defects A13, B23 and D39 were added. Defect D9 was modified. 2017/1/23 4 Revision per Coleman design
More informationInox Mare shipping and packaging instructions compliance
Inox Mare shipping and packaging instructions compliance General Remarks All deliveries to our companies must be made in compliance with following instructions. These shipping and packaging instructions
More informationSection 6 Carton Packing, Packaging, Labeling, Shipping & Loading Requirements
Packing and Packaging Guidelines Tens of Thousands of cartons are received daily in each of our service centers. In order to expedite the receiving of these cartons and maintain a high level of accuracy
More informationQUALITY ASSURANCE. NORDSTROM PRODUCT GROUP QUALITY ASSURANCE PROGRAM FINAL RANDOM INSPECTIONS July 2017
QUALITY ASSURANCE 2017 NORDSTROM PRODUCT GROUP QUALITY ASSURANCE PROGRAM FINAL RANDOM INSPECTIONS July 2017 TABLE OF CONTENTS SECTION PAGE(S) Foreword 2 Introduction - NPG Quality Assurance Team 3 Final
More informationVCP WWW US Warehouse Requirements Revision #: 08
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for product construction and labeling information. Vendors must purchase all shoeboxes, hang tags and other packing materials from
More informationDanson Decor Inc. Barcode Guidelines Edition
Danson Decor Inc. Barcode Guidelines 2012 Edition This page left intentionally blank. Should you have questions, please contact the Danson Product Compliance Team compliance@dansondecor.com INDIVIDUAL
More informationSPORTSMAN S GUIDE (SG)
VENDOR EDI MANUAL SPORTSMAN S GUIDE (SG) Please contact SPS Commerce for details regarding testing, fees, and requirements. SPS Commerce Contact Information: Email: clientservices@spscommerce.com Phone:
More informationTooling Ranir Responsibility... 4 Supplier Responsibility... 4
Supplier Handbook 0 Table of Contents Introduction... 1 Purpose... 1 Intent... 1 Scope... 1 Supplier Accountability Standards... 1 Partnership, Honest and Trust... 1 Quality... 2 Supplier selection, approval,
More informationCarton Packaging, Packaging and Shipping requirements
Contents Carton Packaging,... 1 Footwear... 1 Shoe Laces... 1 Shoe Boxes... 2 Footwaer Master Carton Packaging... 3 Apparel and Accessories... 5 Apparel and Accessories Master Carton Packaging... 7 General
More informationDomestic Shipping Guide
1.0 Introduction 1.1 Purpose: These guidelines advance standardization of procedures to shorten, simplify and reduce total time and cost in the supply chain. They promote ease of doing business between
More informationWritten by: Nusheen Malleck-Amode Date: 28 th Jan 16 Approved by: Date: Page 1
VCP DECATHLON (145943) France Merrell Requirements Revision #: 01 1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must
More informationSECTION 15 CARTON REQUIREMENTS
SECTION 15 CARTON REQUIREMENTS CARTON REQUIRMENTS OVERVIEW 1. Carton Labels are required on all shipments from all vendors 2. We suggest as a best practice extra taping on your cartons. It guards against
More informationForm Fit & Function Engineering, LLC 350 Seminole Drive Spartanburg, SC Supplementary Quality Assurance Clauses
Supplementary Quality Assurance Clauses The Supplementary Quality Assurance Clauses specified on the face of the attached Purchase Order are listed below. Your compliance with these requirements is necessary
More informationReceiving Guide. How to send products to a Shipwire-enabled Ingram Micro fufillment center RECEIVING GUIDE RECEIVING GUIDE
Receiving Guide How to send products to a Shipwire-enabled Ingram Micro fufillment center RECEIVING GUIDE RECEIVING GUIDE Contents 3 Introduction 4 Before You Ship: Checklist 6 Packaging 8 Fragile Products
More informationGHSP Supplier Packaging Requirements and Guidelines
Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns
More informationContents 1. SPECIFICATIONS PRECAUTIONS...4
Operators Manual Contents. SPECIFICATIONS...3. PRECAUTIONS...4 - Cautions When Installing....4 - Cautions when Handling....4-3 Cautions when Transporting...4-4 Cautions when handling the PCB....4 3. ADJUSTMENTS...5
More information78-RK VARIABLE SPEED HEAVY DUTY VIBRATOR OPERATING MANUAL
78-RK VARIABLE SPEED HEAVY DUTY VIBRATOR OPERATING MANUAL IMPORTANT INSTRUCTIONS WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION FD.08/2009 THANK YOU FOR PURCHASING
More informationPacking Slip, Packaging & Labeling Specification. 1.0 Supplier Responsibility
Packing Slip, Packaging & Labeling Specification 1.1 General Statements: 1.0 Supplier Responsibility 1.1.1 Packing Slips must meet Utilimaster s minimum requirements to assure timely receipt of material
More informationJob Approvals Date Originator: N. Holdeman 02/23/99 Hughes Network Systems Approved: Checked: Title: Supplier Bar Code Labels Specification
Date Rev Revision Record Approved 02/23/99 1 Initial Release 03/16/99 A Production release 10/11/99 B INC ECN 59127 3/30/00 C INC ECN 59502 4/27/00 D INC ECN 59572 2/17/01 E INC ECN 60325 5/13/09 F INC
More informationHuskvarna Manufacturing
Management system Quality & Environment Title: Rev no: 11 Doc no: ESAT-86UCW7 Author Approver Sera Akincilar Marcus Sennevik Date: 2017-10-02 Type: Routine R0221-Packaging instructions for suppliers to
More informationZone E Kohl s PO Number Style Number color size total units (if Prepack, total units by size and color)
Appendix SP-2 GS1-128 Carton Label Requirements GS1-128 CARTON LABELING All cartons being shipped to Kohl s stores or distribution centers must have compliant Kohl s GS1-128 carton labels For import orders,
More informationSection 6 Carton Packing, Packaging and Shipping requirements
Contents Carton Packaging,... 1 6.1.1. Footwear... 2 Shoe Laces:... 2 Shoe Boxes:... 2 6.1.2 Pack types... 4 Bin Unit:... 4 Caselot units:... 4 6.1.3 Packaging... 5 6.1.4 Delivery... 7 Palletized shipments...
More informationGHSP Supplier Packaging Requirements and Guidelines
Revision History Revision Date Section Description Revised By 10/1/15 ALL Initial Release M. Weisenreder 04/04/2017 2.1 Added Inside carton dimensions for parts that are re-packed at GHSP, Box Style columns
More informationSection 6- Carton Packing, Packaging, Labeling & Shipping Requirements Packing and Packaging Guidelines Thousands of cartons are received weekly in
Section 6- Carton Packing, Packaging, Labeling & Shipping Requirements Packing and Packaging Guidelines Thousands of cartons are received weekly in our Service Center. In order to expedite the receiving
More informationSPORTSMAN S GUIDE (SG)
VENDOR EDI MANUAL SPORTSMAN S GUIDE (SG) Please contact SPS Commerce for details regarding testing, fees, and requirements. SPS Commerce Contact Information: Email: clientservices@spscommerce.com Phone:
More informationBWI ODETTE CONTAINER LABEL REQUIREMENTS STANDARD
BWI ODETTE CONTAINER LABEL REQUIREMENTS STANDARD 1 VERSION 1.3 Aug 15 th, 2017 Revision history Release number Date of Release Comments 1.0 July 2010 Original version 1.1 July 2011 Supplier Reference changed
More informationVehicle Control Systems An American Standard Company. Packaging and Labeling Requirements Manual for all suppliers
Vehicle Control Systems Packaging and Labeling Requirements Manual for all suppliers TABLE OF CONTENTS 1. INTRODUCTION... 3 1.1. SCOPE AND GENERAL MEANING... 3 1.2. REQUIREMENT... 3 1.3. PROBLEM RESOLUTION...
More informationTRC-FWR TINGLEY RUBBER CORPORATION. Women s Weather Fashions PVC Knee Boot. Product Specification
TRC-FWR-51441 TINGLEY RUBBER CORPORATION Product Specification Women s Weather Fashions PVC Knee Boot Style 51441 Black/Clear / Plain Toe All products conform to Tingley general manufacturing quality standards
More informationBWI AIAG CONTAINER LABEL REQUIREMENTS STANDARD
BWI AIAG CONTAINER LABEL REQUIREMENTS STANDARD 1 VERSION 1.3 Aug 15 th, 2017 Revision history Release number Date of Release Comments 1.0 July 2010 Original version 1.1 Feb 2011 Change to use Supplier
More informationPACKAGING EQUIPMENT
PACKAGING EQUIPMENT www.handleitinc.com STRETCH WRAP MACHINES Handle-It Stretch Wrap Machines Low-Profile Semi-Automatic Stretch Wrap Machines 500 Series Semi-Auto The Handle-It 500 series is designed
More informationVCP Redcats USA Requirements Revision #: 02
1. GENERAL REQUIREMENTS This customer conducts business under the names Lane Bryant, Roamans, Lerner, King Size, Real Comfort, Chadwick s of Boston, LA Redoute, and Jessica London. Formerly known as Brylane.
More informationNORTH AMERICA PACKAGING GUIDELINES FOR SUPPLIERS
North America NORTH AMERICA PACKAGING ZF TRW PROCEDURE REVISIONS Date Release No. Description Revision Engineer May 12, 2006 ERD170420 Initial release A Mark Rausch January 25, 2016 ERD 399955 Updated
More information! (PPE/PFN-B-MR/002)
! (PPE/PFN-B-MR/002) Technical File: PPE/PFN-B-MR/002 Effective Date: 29 Jul. 2011 Section: Table of Contents Page 1 of 1 TABLE OF CONTENTS Section Description Revision i Cover Page - ii Content Page -
More informationREVISIONS. N révision Date Writer Nature Avril 2013 Eurodif-Argon
Eurodif logistics conditions REVISIONS N révision Date Writer Nature Avril 2013 Eurodif-Argon Initial Consulting VF 5 Avril 2014 LBE Main Updating : polybag, position of labels, weight and dimension of
More informationNote: Must have a basic paid subscription through Stamps.com or Endicia.com to purchase postage through Gamut
Print Manager Note: Must have a basic paid subscription through Stamps.com or Endicia.com to purchase postage through Gamut Purchase one or hundreds of shipping labels at a time Print USPS domestic shipping
More informationVCP Sears Requirements Revision #: 14
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoe boxes, hang tags and other packing materials from
More informationRN Optical Termination Panel (RN OTP)
RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.
More informationSPEAKER SC-COBRA
SPEAKER-1115-3.5-SC-COBRA The 11x15x3.5 mm rectangular COBRA speaker is a high end miniature speaker specifically designed for portable consumer devices, such as music phones, smartphones or tablet computers
More informationCash Drawer Identification
Cash Drawer Identification Please use this document to identify the model of cash drawer that is on hand. An FAQ section is listed at the end. 15in MMF Metal Cash Drawer Quick Specs: 15 1/8 inches deep
More informationOperating Instructions
Operating Instructions A-2600 SERIES AWWA SWING CHECK VALVE 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com! WARNING! 1. Read and follow all pertinent instructions carefully. Proper
More informationSeventh Avenue & Ashro
Seventh Avenue & Ashro Package Label Specification Document Version 3 Last Updated: 06/07/2016 Ashro Country Door Ginny's Midnight Velvet Monroe & Main Montgomery Ward's Seventh Avenue Package label inquiries
More informationCar and Counterweight Frames
Car and Counterweight Frames CAR FRAME (SLING) AND PLATFORM COUNTERWEIGHT FRAME Every attempt has been made to ensure that this documentation is as accurate and up-to-date as possible. However, Vertical
More informationThermoelectric Coolers. All Models INSTRUCTION MANUAL. Rev. G 2016 Pentair Equipment Protection P/N
Thermoelectric Coolers All Models INSTRUCTION MANUAL Rev. G 2016 Pentair Equipment Protection P/N 89072602 89072603 TABLE OF CONTENTS RECEIVING THE THERMOELECTRIC COOLER...3 HANDLING & TESTING THE THERMOELECTRIC
More informationCustomer Packaging Guidelines
Customer Packaging Guidelines Customer Packaging Guidelines 05.02.16 v1 CONTENTS Introduction Packaging Tips: Parcels Envelopes Packaging Tips: Pallets Crates Drums Pipes Spools & Reels Packaging Tips:
More informationFamous Footwear VCP
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoe boxes, hang tags and other packing materials from
More informationSTANDARD OPERATING PROCEDURES MANUAL Material Planning & Logistics Futuris Automotive Interiors
STANDARD OPERATING PROCEDURES MANUAL Material Planning & Logistics Futuris Automotive Interiors [ Packaging Specifications for International Suppliers ] Version 1.0 [1] Copyright Futuris Automotive Interiors
More informationThermoelectric Cooler
INSTRUCTION MANUAL Thermoelectric Cooler TE090624020, TE121024020, TE121048020, TE162024020, TE162048020, TE090624010, TE121024010, TE121048010, TE162024010, TE162048010, TE090624011, TE121024011, TE162024011
More informationMATERIAL SPECIFICATION AE-MS0014 Supplier/External Provider Manual Revision: L
Page 1 of 17 MATERIAL SPECIFICATION AE-MS0014 Supplier/External Provider Manual Name Title Date Preparer: Owner: Approved: Approved: Approved: John Mowad Jeanne Roberts John Mowad Jeanne Roberts Elizabeth
More informationVCP Haband Requirements Revision #: 06
1. GENERAL REQUIREMENTS Please refer to the WWW specification sheet(s) for footwear construction and labeling information. Vendors must purchase all shoeboxes, hang tags and other packing materials from
More informationEurope Bill Acceptor EBA xx
Europe Bill Acceptor EBA - 10 - xx CHAPTER 1 Table of Contents & Model Numbers DWG No. 992-11-01-01 Date 97-11 JAPAN CASHMACHINE CO., LTD. Copyright 1997 Japan Cash Machine Co., Ltd. Contents Contents
More informationQuality Management System
Quality Management System 6.1 Quality Q-Codes () 6.1 Quality Q-Codes Quality Clauses The following quality control clauses apply when specifically noted on the Gear Technology purchase order: Q1- Material
More informationDJ Switch 10F V2 ORDERCODE 50365
DJ Switch 10F V2 ORDERCODE 5035 Congratulations! You have bought a great, innovative product from Showtec. The Showtec DJ Switch brings excitement to any venue. Whether you want simple plug-&-play action
More informationPROPOSAL FOR MODEL: HP 2100X
PROPOSAL FOR MODEL: HP 2100X Provided by: www.ptipackaging.com Toll Free 1-800-472-0067 or Contact Us Online .SIMPLY BETTER MODEL HP 2100X HEAVY DUTY TURNTABLE SEMI-AUTOMATIC STRETCH WRAP SYSTEM GENERAL
More informationWARRANTY PROCEDURE FOR PRESTIGIO PRODUCTS FROM SELECTED CATEGORIES
WARRANTY PROCEDURE FOR PRESTIGIO PRODUCTS FROM SELECTED CATEGORIES Prestigio, ensuring the satisfaction of its customers, created an opportunity to submit product complaints in the Fixit company for the
More informationReference Only. Marked three digits system.(ex. 270pF 271) 8 Lead Type
Spec No. JENF243F-0018K-01 P1/11 Disc-Type EMIFIL (A miniature three-terminal capacitor) DSS6N 1.Scope This reference specification applies to DSS6N series. 2.Part Numbering (Ex.) DS S 6 N B3 2A 271 Q93
More informationSmall and Light Program
Small and Light Program Prep and Packaging Guide for Sellers Unique Program Requirements 3 General FBA Requirements 3 Example #1: Units in clear plastic bags 4 Example #2: Units in manufacturer/seller
More informationC60 Standby UPS. 800VA Models. User & Installation Manual Xtreme Power Conversion Corporation. All rights reserved.
For more information, visit www.247technology.com/on-line-ups/c60-standby-ups C60 Standby UPS 800VA Models User & Installation Manual 2015. All rights reserved. (Rev 6/23/15) Table of Contents Package
More informationInfrarot-Strahler VITAE Assembly and operating instruction
Infrarot-Strahler VITAE GB Assembly and operating instruction Druck Nr. 29342328en / 27.12 D 1 English Table of Contents Important notice...3 Technical data...5 Electrical connection...5 Assembly...6 Assembly
More informationFMP Group (Australia) Pty Ltd Supplier Packaging and Shipping Standard. Document No: PS13 Issue No: 05 Date: 2 July 2015
Supplier Packaging and Shipping Standard Document No: PS13 Issue No: 05 Date: 2 July 2015 Review date: 2 July 2016 INTRODUCTION The details in this document are intended to outline a minimum standard for
More informationNorth American Labeling Requirements. TRW Automotive. Livonia, MI
TRW Automotive North American Labeling Requirements TRW Automotive Livonia, MI 1 1. INTRODUCTION 5 2. PURPOSE 6 3. TYPES OF LABELS AND REQUIRED DATA FIELDS 9 3.1 Label Types 9 3.2 Single Pack Carton Label
More informationLogistics Routing Guide- Domestic Distribution Center - Mexico, Missouri
Logistics Routing Guide- Domestic Distribution Center - Mexico, Missouri Table of Contents Overview... 2 Vendor Requirements... 4 Routing Guidelines... 10 Vendor Violations... 13 Returns to Vendors...
More informationNORDSTROM factories are required to perform a seven-point inspection process designed to verify the physical integrity of the container.
1. Container Security Container integrity must be maintained to protect against the introduction of unauthorized material and/or persons. Factory-loaded full containers must have written and verifiable
More informationRobinson Manufacturing Company, Inc. College Concepts, LLC. Vendor Shipment Management System (VSMS)
Robinson Manufacturing Company, Inc. College Concepts, LLC. Vendor Shipment Management System (VSMS) http://lansa.robinsonmfg.com/vsms User Documentation 03-10-2017 1 Contents Introduction Key Features...
More informationHERE S WHERE YOU ARE. product information. samples. Buyer Samples QA Samples Showroom Samples
HERE S WHERE YOU ARE overview purchase orders product samples quality assurance product information brand packaging & labeling shipping compliance Buyer Samples QA Samples Showroom Samples -25- TABLE OF
More informationRead Me First! B700, B702 Quick Install Guide. US English Version
Read Me First! B700, B702 Quick Install Guide Your new system has been designed to let you set it up on your own, so you can begin processing mail in just a short time. Carefully following the sequence
More informationDS-520 Digital Indicator Operation Manual 73366
DS-520 Di gi tal Indi cator Operation Manual 73366 SECTION DS-520 SERIES OPERATING MANUAL INDEX PAGE NUMBER 1.0 GENERAL 2-3 1.1. Features 2 1.2. Keyboard & Display Layout 2 1.3. Key Switch Information
More informationREINFORCED CONCRETE CULVERT STORM DRAIN AND SEWER PIPE FIELD SECTION 1026
(Page 1 of 8) REINFORCED CONCRETE CULVERT STORM DRAIN AND SEWER PIPE FIELD SECTION 1026 1026.1 SCOPE. To establish procedures for the inspection of reinforced concrete pipe and the approval of modified
More informationCarton Requirements. Table of Contents
Carton Requirements Table of Contents Cartons... 3 Recommended Carton Sizes... 3 Inner-pack Packaging... 4 Carton Weight and Condition... 5 Slash Guards Cartons... 6 Sealing Cartons... 6 Carton Labels/Markings...
More informationManual Rotary Heat Sealers. Type: F108TX. List of content : Introduction 2. General description 3. Application 4. Safety precautions 5
Manual Rotary Heat Sealers Type: F108TX List of content : Page: Introduction 2 General description 3 Application 4 Safety precautions 5 Transport and storage 6 Installation 7 First Set-up 8 Connection
More informationHDI 2200 Choke Position Indicator
HDI 2200 Choke Position Indicator Operations and Maintenance Manual Rev. 1203 www.houstondigital.com email: sales@houstondigital.com or service@houstondigital.com TABLE OF CONTENTS SECTION 1 SECTION 2
More informationVendor Compliance. General Requirements
General Requirements Schedule of Current Charges Kohl s compliance policy promotes the cost-effective flow of merchandise to Kohl s stores. Kohl s may at its sole discretion assess handling charges for
More informationPALLET APPLICATION GUIDE
PALLET APPLICATION GUIDE Pallet multi-functional display furniture inspires collaboration for the open office environment. Designed for today s mobile, configurable, and collaborative needs; Pallet can
More informationVendor Partnership Manual. Section 3 Terms & Conditions of Purchase Order
Vendor Partnership Manual Section 3 Terms & Conditions of Purchase Order No changes have occurred in this chapter since our last update in July 2017. Frequently Asked Questions Question If the purchase
More informationMar 2015 Sept 2012 INNOVATION BEYOND TECHNOLOGY
Mar 2015 Sept 2012 INNOVATION BEYOND TECHNOLOGY 1 About the VTech Group Locations Headquartered in HKG since 1976 Listed in HKG (HKSE:303) Factories in HouJie, LiaoBu & QingYuan, R&D Center in SZ Operations
More informationLength (inches) Width (inches) Height (inches) Weight (pounds) Minimum lb. Maximum lbs.
PACKING & LABELING General Carton Packing and Size Requirements Make sure each carton contains merchandise for only one purchase order (9 digit PO). Coordinated tops and bottoms being sold separately must
More informationIn order to expedite the receiving of cartons and maintain a high level of accuracy in processing, the following guidelines have been established:
Section 3a (Retail) Packaging & Packing Instructions Overview Party City/Party America/The Paper Factory As business partners driving mutually beneficial supply chain efficiencies, this section contains
More informationThis Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols.
VIGO INDUSTRIES INSTALLATION GUIDE FOR STANDING SHOWER CABIN (MODEL VG06062) SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the
More informationCONTENTS. 3-1 Unpacking and Checking Installing Components Leveling the Scale... 1
CONTENTS 1. Introduction... 1 2. Precautions... 1 3. Before Using the Product 3-1 Unpacking and Checking. 1 3-2 Installing Components.... 1 3-3 Leveling the Scale.... 1 4. Product Introduction 4-1 Specifications
More informationDONNA KARAN COMPANY, LLC VENDOR NET SYSTEM
DONNA KARAN COMPANY, LLC VENDOR NET SYSTEM TABLE OF CONTENTS 1. Overview Page..2 2. Logging on Page..3 3. Request Labels by Color Page..6 4. Request Labels for Mixed SKU s Page 13 5. Request Labels for
More information2.4 GHz ISM Band Working Frequency
MULTILAYER CERAMIC ANTENNA RFANT Series RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFANT3216120A1T Series *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_RFANT3216120A1T_V04
More informationSUPPLIER DISPOSITION REQUEST
Contractor CAGE Code: 4V360 3550 General Atomics Ct San Diego, CA 92121-1122 SUPPLIER DISPOSITION REQUEST DR NO.: REV.: PAGE: of (3) PART NOMENCLATURE: (4) DWG/PART NO.: (5) REV.: (6) LOCATION: (7) DATE:
More informationWS 10 Weighing indicator USER MANUAL
WS 10 Weighing indicator USER MANUAL Edition:10052001A Safety Instruction For safety operation follow the safety instructions. WARNING Setting, Calibration Inspection and Maintain of the indicator is prohibited
More informationPLEXTOR SSD RMA Request Instructions
PLEXTOR SSD RMA Request Instructions Before requesting RMA, always check Plextor website for latest updates, check of FAQ section for possible solutions. 1. How to request Return Material Authorization
More informationNewmar Corporation s Parts Ordering and Catalog System
Newmar Corporation s Parts Ordering and Catalog System Each Dealership is assigned three (3) User ID s and Passwords. Standard ComNet2 ID/Password provides access to the Main Catalog, Item Listing, Paint
More informationVollrath System Work Instruction
Author: Ed Ferkel Revised by: Mark LeGreve Approved by: Jim Race Page 1 of 17 1. Purpose To provide general guidelines and requirement information for labeling purchased products for The Vollrath Company.
More informationCheck-out Report. Date: 8 th May 2010 Address: Sample check-out, Sample St, Kensington, London. Agent:
Check-out Report Date: 8 th May 2010 Address: Sample check-out, Sample St, Kensington, London Agent: Green Kite Property Services Ltd 48, 2 Point Wharf, Brentford, TW8 0EA Telephone: 0845 643 5401 info@green-kite.co.uk
More informationXSTi Standby UPS. 400VA, 600VA, 800VA Models. User & Installation Manual
XSTi Standby UPS 400VA, 600VA, 800VA Models User & Installation Manual www.xpcc.com 2015. All rights reserved. (Rev 12/14/15) Table of Contents Package Contents... 3 Product Introduction... 3 Product Overview...
More informationSUPPLIER QUALITY CODES
Supplier Quality s D07-00125 Rev A APPROVALS NAME AND TITLE SIGNATURE DATE M.G. Blankenship Senior Director, Operations I. Jimenez Materials Manager D07-00125-02 Page 1 of 5 SQC 1 SQC 2 SQC 3 SQC 4 SQC
More informationVENDOR INSPECTION REPORT
Inspector: Mr. Tom Tu Page : 1 of 19 Project name: Piping Inspection - China - Litonglian Executing Country: Client: XX Holding Group PO No.: 42010 Contact: JM +49 Vendor/Manufacturer: Litonglian / HEBEI
More informationCanada Milton Service Centre
Detailed below are the routing and appointment scheduling instructions to be followed by service center you are shipping to. All vendors/carriers are required to call for an appointment at least 48 hours
More informationMIL-L-26764B 4 March 1970 SUPERSEDING MIL-L-26764(ASG) 12 December 1963 MILITARY SPECIFICATION
4 March 1970 SUPERSEDING MIL-L-26764(ASG) 12 December 1963 MILITARY SPECIFICATION LIGHT, MARKER, AIRPORT APPROACH, HIGH INTENSITY, TYPE MB-2 This specification has been approved by the Department of the
More informationBest Selection for Your Business. Electronic Pricing Scale. User s Manual. (Model: TP-31)
Best Selection for Your Business Electronic Pricing Scale User s Manual (Model: TP-31) CATALOG 1. Foreword... 2 1.1. Introductions... 2 1.2. Main functions and features... 2 1.3. Specification... 2 1.4.
More informationNARROW PITCH (0.4mm) CONNECTORS P4S SERIES
FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)
More information